| DEGACRYL® HS 4151 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyre...view more DEGACRYL® HS 4151 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is applied as an universal binder in PVC free, primerless heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET) or vinyl (PVC). Primered with polyesters like DYNAPOL® L 206 / 208[1] adhesion to PET is achieved. view less | Request Sample |
| REVACRYL™ AE 3737 | Synthomer | REVACRYL™ AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers, and ammonia. REVACRYL™ AE 3737 is a low MFFT styrene-acrylic dispersion with high water-resistance, excellent wet adhesion and good flexibility. It is highly recommended for ETICS-primer...view more REVACRYL™ AE 3737 is a finely dispersed, aqueous dispersion of an acrylic ester-styrene copolymer. The dispersion contains an anionic emulsifier system, is free from film forming aids, APEO, solvents, plasticizers, and ammonia. REVACRYL™ AE 3737 is a low MFFT styrene-acrylic dispersion with high water-resistance, excellent wet adhesion and good flexibility. It is highly recommended for ETICS-primers and renders. view less | |
| WorléeKyd MH 439 (60% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeKyd MH 439 (60% In Xylene) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length ...view more WorléeKyd MH 439 (60% In Xylene) is a short oil, fast drying alkyd resin for the production of air and forced drying primers and top coats as well as for low aromatic containing paints. W´Kyd MH 439 is compatible with most short oil and medium oil length alkyd resins. It is also compatible with some physical drying binders like vinyl mix polymerisates (e.g. Laroflex from BASF) and chlorinated rubber (e.g. Pergut from Bayer). W´Kyd MH 439 can also be used for fast drying and high resistant industrial enamels. view less | |
| WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...view more WorléeThix V 727 (50%-54% Isoparaffin HC 170-200) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, as well as for wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| WorléeThix V 727 (50%-54% White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% White Spirit 180-210) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compat...view more WorléeThix V 727 (50%-54% White Spirit 180-210) is a long oil alkyd resin for the manufacture of gloss, semi-gloss, and mat wall paints, wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| Deuteron LE 80 | Deuteron | Deuteron LE 80 has a cationic character and an extreme polarity. Because of this, the electric resistance of organic solvents and their mixtures is considerably reduced - even when using small quantities. Deuteron LE 80 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy. Deuteron LE 80 can be used in air-drying primer...view more Deuteron LE 80 has a cationic character and an extreme polarity. Because of this, the electric resistance of organic solvents and their mixtures is considerably reduced - even when using small quantities. Deuteron LE 80 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy. Deuteron LE 80 can be used in air-drying primers and coatings, baking enamels, 2-compound systems and wood finishes. view less | Request Sample |
| LUVOTIX® PAB | LEHVOSS Group | LUVOTIX® PAB is a finely micronized polyamide based on a blend of fatty acid amides. It is used as a rheological additive in solvent-borne and solvent-free medium to higher polar liquid organic systems. Its optimum performance is achieved at process temperatures above 55 °C. This product can be used in primer...view more LUVOTIX® PAB is a finely micronized polyamide based on a blend of fatty acid amides. It is used as a rheological additive in solvent-borne and solvent-free medium to higher polar liquid organic systems. Its optimum performance is achieved at process temperatures above 55 °C. This product can be used in primers as well as in glossy top-coat systems. It is suitable for industrial coatings, corrosion protection coatings, adhesives, putties and sealants. view less | |
| Epotec® YD 128 ED | Aditya Birla | Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-deposition automotive primer...view more Epotec® YD 128 ED is an unmodified, medium viscosity liquid epoxy resin, produced from bisphenol-A and epichlorohydrin and specially developed with very low levels of metal impurities such as sodium and iron ions. Primarily designed for use in electro-deposition automotive primers and coatings, this product is also well-suited for use in various solvent-based & solvent-free coatings, can & coil coatings, and marine & industrial coatings. view less | |
| Epotec® YD 017S | Aditya Birla | Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primer...view more Epotec® YD 017S is a reduced viscosity, high molecular weight, bisphenol-A-based solid epoxy resin designed primarily for single pack, baking-type epoxy-amino and epoxy-phenolic coatings used in the packaging industry. It can also be used in the manufacture of epoxy esters for industrial protective coatings. This product is ideal for use in can coatings, coil coatings, linings for tubes & drums, and high performance primers. view less | |
| Nebores® FPB 272-50 D | NECARBO B.V. | Nebores® FPB 272-50 D is a medium alkyd resin appearing as a light yellow liquid. 50% in Shellsol™ D 40, it improves dying and has through-drying properties at low temperatures, gloss and colour retention at elevated temperatures and in outdoor conditions, and adhesion on steel and primer...view more Nebores® FPB 272-50 D is a medium alkyd resin appearing as a light yellow liquid. 50% in Shellsol™ D 40, it improves dying and has through-drying properties at low temperatures, gloss and colour retention at elevated temperatures and in outdoor conditions, and adhesion on steel and primers. Nebores® FPB 272-50 D finds application in radiator paints requiring yellowing resistance, and in industrial coatings. view less | |
| Pangel OM4 | Tolsa SA | Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and high viscosity and consistency over a wide temperature range. it can be used in anti-corrosive paints, polyester coatings, primer...view more Pangel OM4 is a rheological additive for intermediate to low polarity systems made from purified bentonite clay. It is recommended for solvent-borne systems that require thixotropic and pseudoplastic effects, sag control, levelling, pigment settling, and high viscosity and consistency over a wide temperature range. it can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes road marking paints, varnishes, lubricating greases, and bituminous undercoats. view less | |
| CHS-Epoxy 210 X 75 | Spolchemie | CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance two components coating materials such as anti-corrosion primer...view more CHS-Epoxy 210 X 75 is a Gardner colored solution of an epoxy resin. This product is a low weighted epoxy resin in xylene and its epoxide equivalent weight (EEW) range is 445-500 g/mol. This product is primarily used for manufacturing of high performance two components coating materials such as anti-corrosion primers, baking coating, paints for heating oil tanks, penetrates of concrete, treatment of wood and metal surfaces. view less | |
| NACORR® 1389 MS | King Industries, Inc. | NACORR® 1389 MS is a liquid corrosion inhibitor based on the calcium salt of organic acids that is put in mineral spirits. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and it can easily be incorporated in most paint systems. This product can be used in solvent-based air dry and thermoset coatings. It is suggested for 2K urethane primer...view more NACORR® 1389 MS is a liquid corrosion inhibitor based on the calcium salt of organic acids that is put in mineral spirits. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and it can easily be incorporated in most paint systems. This product can be used in solvent-based air dry and thermoset coatings. It is suggested for 2K urethane primers, general industrial and maintenance coatings. view less | |
| NACORR® 1754 | King Industries, Inc. | NACORR® 1754 is a liquid corrosion inhibitor that is based on an amine salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in water based primer...view more NACORR® 1754 is a liquid corrosion inhibitor that is based on an amine salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in water based primers for appliance, coil and automotive applications. view less | |
| AFCONA - 5008 | AFCONA Additives Sdn Bhd | AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and organically treated bentonites while decreasing pigment sedimentation. AFCONA – 5008 is widely compatible in systems from no polarity to high polarity, finding application in primer...view more AFCONA – 5008 is an unsaturated polyamide and acid ester salts in an alkyl benzene solvent. This transparent yellow to brown liquid functions as an anionic and catatonic wetting and dispersing additive which improves the wetting of pigment surfaces and organically treated bentonites while decreasing pigment sedimentation. AFCONA – 5008 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| AFCONA - 5054 | AFCONA Additives Sdn Bhd | AFCONA – 5054 is a high molecular weight carboxylic acid salts in an alkylbenzene solvent. This transparent yellow to brown liquid functions as a wetting and dispersing additive to prevent the sedimentation and flooding of pigments by preventing interfacial tension between the hydrophilic pigments, extenders, and the binder, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5054 is widely compatible and finds application in primer...view more AFCONA – 5054 is a high molecular weight carboxylic acid salts in an alkylbenzene solvent. This transparent yellow to brown liquid functions as a wetting and dispersing additive to prevent the sedimentation and flooding of pigments by preventing interfacial tension between the hydrophilic pigments, extenders, and the binder, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5054 is widely compatible and finds application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| Epilox® Hardener H 12-01 | Leuna-Harze GmbH | Epilox® Hardener H 12-01 is a modified polyaminoamide epoxide adduct. It is a solventless, yellowish liquid and can be used to emulsify liquid epoxy resins in water. It has a viscosity at 25 Celsius (mPa·s) of 13000 - 23000 and an amine equivalent weight of 185 grams. Epilox® Hardener H 12-01 is used as an emulsifying curing agent in formulations with liquid epoxy resins for aqueous primer...view more Epilox® Hardener H 12-01 is a modified polyaminoamide epoxide adduct. It is a solventless, yellowish liquid and can be used to emulsify liquid epoxy resins in water. It has a viscosity at 25 Celsius (mPa·s) of 13000 - 23000 and an amine equivalent weight of 185 grams. Epilox® Hardener H 12-01 is used as an emulsifying curing agent in formulations with liquid epoxy resins for aqueous primers, paintings, and coatings. view less | |
| BAM 202 WS-55 | Bonyan Kala Chemie Co. | BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primer...view more BAM 202 WS-55 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 350-900 stoke at 25°C and is mainly used in zinc chromate primers, industrial machinery coatings, metal structural coatings, and spray, auto body repair and industrial air-drying paints. view less | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. view less | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. view less | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...view more MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. view less | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. view less | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. view less | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. view less | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...view more MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. view less | |
| Iscathix® T | ISCA UK Limited | Iscathix® T is a 100% active rheological additive based on a modified hydrogenated castor oil wax, and is suitable for use in a wide range of coating systems. Iscathix® T can be used for: Air-drying industrial coatings, architectural paints, solvent-free systems, chlorinated rubbers, 2K epoxy primer...view more Iscathix® T is a 100% active rheological additive based on a modified hydrogenated castor oil wax, and is suitable for use in a wide range of coating systems. Iscathix® T can be used for: Air-drying industrial coatings, architectural paints, solvent-free systems, chlorinated rubbers, 2K epoxy primers and top-coats, road marking paints, thermoplastic acrylics, isocyanate-free 2K acrylics, etc. view less | |
| Intelli-ion® | Hexigone Inhibitors Ltd | Intelli-ion® is an award-winning, patented technology that is designed to completely replace heavy metal and chromate inhibitors or co-blend with phosphate inhibitors. It provides the coatings market with cost-effect, high-performance, sustainable anti-corrosive additives. The smart technology fights corrosion when used in primer...view more Intelli-ion® is an award-winning, patented technology that is designed to completely replace heavy metal and chromate inhibitors or co-blend with phosphate inhibitors. It provides the coatings market with cost-effect, high-performance, sustainable anti-corrosive additives. The smart technology fights corrosion when used in primers with full system barrier topcoats and is compatible with a broad spectrum of resin types, coating types, and coatings manufacturing routes. view less | |
| Finntalc M20L | Elementis | Finntalc M20L is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in general purpose architectural paints, industrial top coats and tintable primer...view more Finntalc M20L is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. It is ideal for use in general purpose architectural paints, industrial top coats and tintable primers. view less | Request Sample |
| Deuteron LE 50 | Deuteron | Deuteron LE 50 has a cationic character and an extreme polarity. Because of this, the electric resistance of organic solvents and their mixtures is considerably reduced - even when using small quantities. Deuteron LE 50 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy. Deuteron LE 50 can be used in air-drying primer...view more Deuteron LE 50 has a cationic character and an extreme polarity. Because of this, the electric resistance of organic solvents and their mixtures is considerably reduced - even when using small quantities. Deuteron LE 50 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy. Deuteron LE 50 can be used in air-drying primers and coatings, baking enamels, 2-compound systems and wood finishes. view less | Request Sample |
| REVACRYL™ AE 6030 | Synthomer | REVACRYL™ AE 6030 is a finely dispersed aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. REVACRYL™ AE 6030 is a hydrophobic styrene-acrylic dispersion. It shows an excellent adhesion to various metal substrate and a high water-resistance. It is highly recommended for anti-corrosive primer...view more REVACRYL™ AE 6030 is a finely dispersed aqueous dispersion of a styrene-acrylic ester copolymer. The dispersion contains an anionic emulsifier system and is free from film forming aids, APEO, solvents and plasticizers. REVACRYL™ AE 6030 is a hydrophobic styrene-acrylic dispersion. It shows an excellent adhesion to various metal substrate and a high water-resistance. It is highly recommended for anti-corrosive primers and non-decorative metal monocoats. view less | |
| CHS-Alkyd AL 3964 | Spolchemie | CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primer...view more CHS-Alkyd AL 3964 is a short oiled alkyd based resin that is made from dehydrated castor oil (DCO) and rich linoleic fatty acids. This product has very high viscosity and 70% solution in butyl glycol and butanol. It is water reducible after pH adjustment to 8.2 – 8.6 with ammonia or amine. CHS-Alkyd AL 3964 is primarily used for fast drying solvent primers, topcoats and one-layer coatings for industrial use. The application works by spraying, dipping and flooding. Due to low thermo plasticity in CHS-Alkyd AL 3964 it rapidly air dries to provide corrosion resistance and flexibility. view less | |
| Anquamine® 419 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primer...view more Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primers, white gloss enamels and clear coats. It can be used with different solid epoxy resin dispersions depending upon the properties desired. view less | Request Sample |
| BYK®-P 104 | BYK | BYK®-P 104 is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer. This product is suitable for medium to high polar systems and particularly effective in preventing flooding of titanium dioxide in combination with other color pigments. It is also used in amine-neutralized aqueous coatings; it is not compatible with mineral spirits. When used in anti-corrosion primer...view more BYK®-P 104 is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer. This product is suitable for medium to high polar systems and particularly effective in preventing flooding of titanium dioxide in combination with other color pigments. It is also used in amine-neutralized aqueous coatings; it is not compatible with mineral spirits. When used in anti-corrosion primers, in many cases the protective properties are enhanced. view less | |
| WorléeKyd S 6003 hv | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 hv is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd S ...view more WorléeKyd S 6003 hv is an isocyanate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 50% ± 1. W´Kyd S 6003 hv is compatible with the majority of medium and long oil types air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeThix S 6357 (40% In White Spirit 180-210) | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Th...view more WorléeThix S 6357 (40% In White Spirit 180-210) is a long oil thixotropic alkyd resin used for the manufacture of anti-corrosive primers, decorative and building paints, and thick layer wood glazings. This grade has a non volatile content of 40% ± 2. W´Thix S 6357 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. view less | |
| CRAYVALLAC® EXTRA | Arkema Rheology & Specialty Additives | CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLA...view more CRAYVALLAC® EXTRA is a high performance, micronised amide wax rheology modifier suitable for high-solids and solvent-free applications with very high robustness. It is especially recommended in 2K epoxy primers for its high temperature tolerance.CRAYVALLAC® EXTRA overcomes those difficulties which exist with hydrogenated castor oil based rheology modifiers e.g. seeding and false-body and that were maximized when activation was performed at high temperatures. view less | Request Sample |
| PLIOWAY® Ultra 350LV | Omnova Solutions | PLIOWAY® Ultra 350LV is a vinyl acrylate copolymer. This newtonian low viscosity resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on Ultra 350LV form by solvent evaporation, with low internal tension, making them ideal for renovation of old problematic coatings. Typical applications include: high solids odorless primer...view more PLIOWAY® Ultra 350LV is a vinyl acrylate copolymer. This newtonian low viscosity resin is soluble in odorless isoparaffinic solvents and provides namely excellent adhesion on a wide variety of substrates and stain blocking properties. Paint films based on Ultra 350LV form by solvent evaporation, with low internal tension, making them ideal for renovation of old problematic coatings. Typical applications include: high solids odorless primers, intumescent coatings. view less | |
| CYMEL® U-216-10LF | Allnex | CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primer...view more CYMEL® U-216-10LF Resin is an n-butylated urea resin which has excellent compatibility with hydrophobic resins, including epoxies. It is the exempt solvent version of CYMEL® 216-8 resin with the additional benefit of lower free formaldehyde. It was designed for metal deco coatings, can coatings and coil coating primers. This product may also be added as a leveling agent in cold-cure amine catalyzed epoxy resin systems. view less | Request Sample |
| Eastek™ 1200 Polymer Dispersion | Eastman Chemical B.V. | Eastek™ 1200 Polymer Dispersion is a film forming polyester polymer supplied as an aqueous solution containing 2% n-propanol and 30% polymer solids. Eastek™ 1200 provides excellent water resistance, alcohol resistance, fast drying rates, low odor, and a consistently low coefficient of friction. Eastek™ 1200 Polymer Dispersion is amine and surfactant free. It used for overprints, primer...view more Eastek™ 1200 Polymer Dispersion is a film forming polyester polymer supplied as an aqueous solution containing 2% n-propanol and 30% polymer solids. Eastek™ 1200 provides excellent water resistance, alcohol resistance, fast drying rates, low odor, and a consistently low coefficient of friction. Eastek™ 1200 Polymer Dispersion is amine and surfactant free. It used for overprints, primers for industrial wood coatings, and printing inks. view less | |
| EBECRYL® 4175 | Allnex | EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and...view more EBECRYL® 4175 is a hard unsaturated wax-free polyester resin recommended for use in cost-effective UV-curing primers and coatings for wood that is diluted with 25% dipropyleneglycol diacrylate (DPGDA). It is used in formulation of radiation-curing (UV and EB) coating for application by roller coating, spraying and curtain coating on wood, cork and furniture. EBECRYL® 4175 can be used to formulate clear high-gloss to matt UV- curing systems. view less | Request Sample |
| RHEOLATE® 266 | Elementis | RHEOLATE® 266 rheological additive is an aqueous polyether polyurethane associative thickener (NISAT) for waterborne systems is based on a new polyether urea polyurethane polymer. The activity has been engineered to provide highly efficient thickening at low- to medium-shear rates and shear-thinning viscosity. This rheology modifier is ideal for spray-applied or doctor-blade-applied systems such as industrial topcoats and primer...view more RHEOLATE® 266 rheological additive is an aqueous polyether polyurethane associative thickener (NISAT) for waterborne systems is based on a new polyether urea polyurethane polymer. The activity has been engineered to provide highly efficient thickening at low- to medium-shear rates and shear-thinning viscosity. This rheology modifier is ideal for spray-applied or doctor-blade-applied systems such as industrial topcoats and primers; furniture and wood lacquers; maintenance paints; adhesives. view less | Request Sample |
| NACORR® 1651 | King Industries, Inc. | NACORR® 1651 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.93, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primer...view more NACORR® 1651 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.93, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primers, general industrial and maintenance coatings. view less | |
| NACORR® 1652 | King Industries, Inc. | NACORR® 1652 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primer...view more NACORR® 1652 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primers, general industrial and maintenance coatings. view less | |
| NACORR® 1352 | King Industries, Inc. | NACORR® 1352 is a liquid corrosion inhibitor that is based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, good color strength, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in waterborne primer...view more NACORR® 1352 is a liquid corrosion inhibitor that is based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, good color strength, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in waterborne primers, general industrial and maintenance coatings. view less | |
| Tiona® 596 Slurry | Cristal Global | Tiona® 596 Slurry, in the form of a white odorless liquid, is an aqueous dispersion of Tiona® 596, a multipurpose chloride-process rutile titanium dioxide pigment. It has high opacity, good multipurpose durability, good tint strength, high gloss, and extreme whiteness. Tiona® 596 Slurry has recommended applications in exterior and interior decorative and architectural coatings, water-based industrial coatings, and water-based undercoats and primer...view more Tiona® 596 Slurry, in the form of a white odorless liquid, is an aqueous dispersion of Tiona® 596, a multipurpose chloride-process rutile titanium dioxide pigment. It has high opacity, good multipurpose durability, good tint strength, high gloss, and extreme whiteness. Tiona® 596 Slurry has recommended applications in exterior and interior decorative and architectural coatings, water-based industrial coatings, and water-based undercoats and primers. view less | |
| BAM 204 WS-50 | Bonyan Kala Chemie Co. | BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primer...view more BAM 204 WS-50 is a medium oil alkyd resin that is used for its surface and deep drying, gloss retention, adhesion and flexibility, solvent acceptation, hardness, and pigment wetting and dispersing properties. This product has a viscosity of 150-350 stoke at 25°C and is mainly used in cabinet and spray paints, industrial air-drying paints, metal structural coatings, industrial machinery coatings, paste for architectural paints, and anti-corrosion primers. view less | |
| 1488 VT/OIL Copolymer Resin | Gabriel Performance Products | 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evapora...view more 1488 VT/OIL COPOLYMER RESIN is a vinyl toluene/oil copolymer resin supplied at 60% non-volatile in VM&P Naphtha. This resin is used in the manufacture of fast air drying machinery enamels and primers. Products made with this resin dry primarily by evaporation or solvent from the applied coatings surface. To improve the mar resistance of the coating, approximately 10% melamine resin is added and cured for 20 minutes at 250°F (121°C). view less | |
| SILLITIN Z 89 PURISS | Hoffmann Mineral | SILLITIN Z 89 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| Ascinin® P | OMG Borchers GmbH | Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting duri...view more Ascinin® P is a 40 % solution of a substituted phenol in xylene and n-butanol. It is used as an anti-skinning agent in clear and pigmented lacquers and paints based on drying oils, alkyd resins and other oils. In primers, Ascinin® P prevents lifting during over-coating. In baking paints, it eliminates surface defects. This product's active substance is not very volatile, so it counteracts wrinkling even in baking paints based, for examply, on ricin alkyds. view less | |
| Borchi® Gol PL | OMG Borchers GmbH | Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reduction in adhesion between base and top coat. lt can therefore be used in primer...view more Borchi® Gol PL is a leveling agent that is highly compatible with numerous organic binders and is an effective flow-promoter. lt eliminates rheological defects such as craters and / or spray structures. This product does not generally result in a reduction in adhesion between base and top coat. lt can therefore be used in primers and undercoats. This product is particularly effective in unsaturated, paraffin-free polyester resins, epoxy resins and combinations of epoxy resins with phenolic resins or amino resins. view less | |
| WorléeThix V 747 (50%-54% Dearomatized HC 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix V 747 (50%-54% Dearomatized HC 180-220) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of 52...view more WorléeThix V 747 (50%-54% Dearomatized HC 180-220) is a long oil alkyd resin used for the manufacture of primers, mat wall and silk gloss paints and for thixotropic glossy decorative and protective house paints. This grade has a non volatile content of 52% ± 2. All these paint systems show very good application properties while brushing rolling and spraying. W´Thix V 747 avoids sagging from vertical surfaces. view less | |
| Silane Coupling Agent KH-792 | Zhejiang Feidian Chemical Co., Ltd. | KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primer...view more KH-792 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. KH-792 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker(moisture crosslinking of polymers). The application as coupling agent leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. view less | |
| WorléeThix S 6358 | Worlée-Chemie G.m.b.H. | WorléeThix S 6358 is a long oil thixotropic alkyd resin. With the addition of polar solvents and heat the soft gel structure is not totally degradable. This grade has a non volatile content of 50% ± 2. It is used for the manufacture of anticorrosive primer...view more WorléeThix S 6358 is a long oil thixotropic alkyd resin. With the addition of polar solvents and heat the soft gel structure is not totally degradable. This grade has a non volatile content of 50% ± 2. It is used for the manufacture of anticorrosive primers, decorative and building paints as well as wood glazings. W´Thix S 6358 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. view less | |
| Pliolak® AR 320 | Omnova Solutions | Pliolak® AR 320 is a short-oil drying alkyd resin based on vegetable fatty acids. It is composed of 32% oil and 43% phthalic anhydride and its delivery form is 50% in Xylene/Methyl ketone. Pliolak® AR 320 is suitable for the formulation of quick-sanding wood primer...view more Pliolak® AR 320 is a short-oil drying alkyd resin based on vegetable fatty acids. It is composed of 32% oil and 43% phthalic anhydride and its delivery form is 50% in Xylene/Methyl ketone. Pliolak® AR 320 is suitable for the formulation of quick-sanding wood primers and undercoats with fast-drying, high chemical resistance and hardness. Formulation of quick-sanding coatings can be obtained by the combination of Pliolak® AR 320 with isocyanates. view less | |
| OPTIGEL® CK | BYK | OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primer...view more OPTIGEL® CK is a specially selected and activated bentonite product, is highly swelling in water and shows a marked thixotropic thickening effect. It prevents settling of heavy pigments/extenders and incorporates a yield value into the system. This product has applications in areas such as emulsion paints and plasters, dip coatings, primers, sealants and putties, ceramic frits and compounds, welding rods, foundry washes, cleaners and polishes, adhesives, bitumen emulsions, water reducible systems, and oil-in-water emulsions. view less | |
| AFCONA - 5244 | AFCONA Additives Sdn Bhd | AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the interfacial tension between pigments or extenders and the vehicle. AFCONA – 5244 stabilizes pigments through electrical charge repulsion forces, finding application in epoxies and polyurethane primer...view more AFCONA – 5244 is an unsaturated polyamide and ester salts. This hazy yellow to brown liquid functions as an anionic and cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing the interfacial tension between pigments or extenders and the vehicle. AFCONA – 5244 stabilizes pigments through electrical charge repulsion forces, finding application in epoxies and polyurethane primers, UPE applications such as gel coats, buttons, SMC, and BMC, and in P VC systems. view less | |
| BENDA-LUTZ® 7825 | Benda-Lutz | BENDA-LUTZ® 7825 is a non-leafing aluminum pigment powder. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 7825 has an average particle size of 19. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 7825 is a non-leafing aluminum pigment powder. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 7825 has an average particle size of 19. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 7865 | Benda-Lutz | BENDA-LUTZ® 7865 is a non-leafing aluminum pigment powder. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 7865 has an average particle size of 9. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 7865 is a non-leafing aluminum pigment powder. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 7865 has an average particle size of 9. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 7080 | Benda-Lutz | BENDA-LUTZ® 7080 is a non-leafing aluminum pigment powder. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 7080 has an average particle size of 6. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 7080 is a non-leafing aluminum pigment powder. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 7080 has an average particle size of 6. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| CLAYTONE 34 | BYK | CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primer...view more CLAYTONE 34 is a modified montmorillonite designed for use in aliphatic systems containing aromatic solvent or aromatic-aliphatic solvent blends which display moderate polarity. It demonstrates high gelling efficiency, reproducible viscosity and thixotropic development, a high degree of sag control and prevents hard settling of pigments and fillers. CLAYTONE 34 has proven to be a reliable and reproducible rheological additive for use in oil based paints, stains, alkyd enamels and primers, and epoxy systems. view less | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primer...view more Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. view less | |
| VYLON GK-360 | DKSH | VYLON GK-360 is a high molecular weight copolyester, with high Tg. VYLON GK-360 has an excellent weather resistance compare to other grades, and has good adhesion to PET and metal substrates. VYLON GK-360 is suitable for can and coil coatings, screen printing inks, primer...view more VYLON GK-360 is a high molecular weight copolyester, with high Tg. VYLON GK-360 has an excellent weather resistance compare to other grades, and has good adhesion to PET and metal substrates. VYLON GK-360 is suitable for can and coil coatings, screen printing inks, primers, coating and adhesion, heat seal lacquers for flexible food packaging. VYLON GK-360 is compliant with FDA 175.105. This product is available in Europe, USA and India. view less | Request Sample |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primer...view more DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1....view more WorléeKyd B 865 U (55% Dearomatized Hydrocarbons 180-220) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. When paints or lacquers based on W´Kyd B 865 U are applied by conventional or airless spray, only water irrigated spraying cabinets are recommended as the spraying dust tends to self-ignite if it is dry. view less | |
| WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) | Worlée-Chemie G.m.b.H. | WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. W´Kyd ...view more WorléeKyd B 865 U (55% In Isoparaffin, HC 170-200) is a urethane modified long oil alkyd resin. It is used in wood varnishes, parquet sealers, primers, undercoat lacquers, and fast drying top coats. This grade has a non volatile content of 55% ± 1. W´Kyd B 865 U is compatible with the majority of medium and long oil types of air drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeKyd S 6003 (51% In Dearomatized HC 160-200) | Worlée-Chemie G.m.b.H. | WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile...view more WorléeKyd S 6003 (51% In Dearomatized HC 160-200) is an isocynate modified long oil alkyd resin recommended as the only binder for high quality interior and exterior wood varnishes for floors, parquets, primers and top coats. This grade has a non volatile content of 51% ± 1. W´Kyd S 6003 is compatible with the majority of medium and long oil types air-drying alkyd resins and with nearly all maleic and phenolic modified hard resins. view less | |
| WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) | Worlée-Chemie G.m.b.H. | WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Th...view more WorléeThix V 727 (50%-54% Dearomatized Hydrocarbons 180-220) is a long oil alkyd for the manufacture of gloss, semi-gloss, and mat wall paints, as well as wood stains, anti-corrosive paints and primers with excellent flow properties and brushability. W´Thix V 727 decreases sagging from vertical surfaces. W´Thix V 727 is compatible with most medium and long oil air drying alkyd resins. It is also compatible with maleic and phenolic modified hard resins. view less | |
| Pliodisp® 7788 | Omnova Solutions | Pliodisp® 7788 is an aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is especially suitable for manufacturing paints with low VOC (Volatile Organic Compounds) content. Pliodisp® 7788 allows for the formation of matte and semi-gloss interior paints, as well as the deep shade paints without the need of coalescing agents to reduce the minimum film formation temperature. It is also used as a binder for the formation of aqueous primer...view more Pliodisp® 7788 is an aqueous copolymer emulsion based on acrylic and methacrylic acid esters. It is stabilized with emulsifiers and is especially suitable for manufacturing paints with low VOC (Volatile Organic Compounds) content. Pliodisp® 7788 allows for the formation of matte and semi-gloss interior paints, as well as the deep shade paints without the need of coalescing agents to reduce the minimum film formation temperature. It is also used as a binder for the formation of aqueous primers. It has an average particle size of approximately 0.10μm. view less | |
| Deuteron LE 947 | Deuteron | Deuteron LE 947 is designed to be used in solvent-based finishing coatings and primers to decrease the electrical resistance in order to adjust the conductivity for electrostatic spraying. Because of its cationic character and its high polarity, Deuter...view more Deuteron LE 947 is designed to be used in solvent-based finishing coatings and primers to decrease the electrical resistance in order to adjust the conductivity for electrostatic spraying. Because of its cationic character and its high polarity, Deuteron LE 947 reduces the electrical resistance of solvents and their mixtures. The product is compatible with most of the binders common in the paint industry. It is highly effective, thus making it possible to obtain the required conductivity with a small addition of the product. Generally there is no impact on drying and adhesion of the coating system. view less | Request Sample |
| ESACOTE PU 147 | LEHVOSS Group | ESACOTE PU 147 is a waterborne polyurethane-acrylic copolymer dispersion based on aliphatic isocyanates and polyether diols, surfactants free. It is able to form transparent and tough films, with high gloss level and chemical resistance. It shows good adhesion on wood, polyester primer...view more ESACOTE PU 147 is a waterborne polyurethane-acrylic copolymer dispersion based on aliphatic isocyanates and polyether diols, surfactants free. It is able to form transparent and tough films, with high gloss level and chemical resistance. It shows good adhesion on wood, polyester primers, glass and metal; however, it is not suitable for products/applications requiring direct adhesion on plastics. ESACOTE PU 147 is then particularly suitable for wood coating, wood flooring, and metal coating, where excellent chemical resistance, adhesion, and transparency are required. view less | |
| Finntalc M05N | Elementis | Finntalc M05N is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility. It has 44% of the particle size <2 µm. It has applications in exterior flat emulsion paints, multi-purpose interior/exterio...view more Finntalc M05N is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility. It has 44% of the particle size <2 µm. It has applications in exterior flat emulsion paints, multi-purpose interior/exterior paints, interior flat emulsion paints, semi-gloss emulsion paints, wood primers, alkyd topcoats, silk and eggshell paints, powder coatings, yacht paints, gel coats, and can/coil/E-coat coatings. view less | Request Sample |
| Vinyltris-(2-Methoxyethoxy)Silane | Dalian Onichem Co., Ltd. | Vinyltris-(2-Methoxyethoxy)Silane is a bifunctional organosilane processing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. It is very easy to dissolve in water as well because of its ether structure. Vinyltris-(2-Methoxyethoxy)Silane is used mainly in mineral-filled EPM (ethylene propylene monomer) and EPDM (ethylene propylene diene monomer) cables. It is also used in the production of silane-modified polymers that serve as binders for paints and adhesives, and as an adhesion promoter in primer...view more Vinyltris-(2-Methoxyethoxy)Silane is a bifunctional organosilane processing a reactive vinyl group and a hydrolyzable 2-methoxy-ethoxy-silyl group. It is very easy to dissolve in water as well because of its ether structure. Vinyltris-(2-Methoxyethoxy)Silane is used mainly in mineral-filled EPM (ethylene propylene monomer) and EPDM (ethylene propylene diene monomer) cables. It is also used in the production of silane-modified polymers that serve as binders for paints and adhesives, and as an adhesion promoter in primers and coatings. view less | Request Sample |
| Alkipol 380-50 T | Polidur San Luis | Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 T has applications in fast air drying enamels, varnishes for electrical uses, fast air dry corrosion resistant primer...view more Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 T has applications in fast air drying enamels, varnishes for electrical uses, fast air dry corrosion resistant primers and is an air dry modifier for medium oil alkyd resins. view less | |
| Razeen® SR 5071 | Jubail Chemical Industries Co. | Razeen® SR 5071 is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 has a softening point value of 77 - 82 °C is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primer...view more Razeen® SR 5071 is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 has a softening point value of 77 - 82 °C is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primers, marine finishes, floor finishes, and concrete coatings. view less | |
| SiSiB® PC2510 | SiSiB SILICONES | SiSiB® PC2510, or gamma-Ureidopropyltrimethoxysilane, is a clear amber liquid. It is a 100% active ureido silane that may be used to promote adhesion between a range of resins and substrates, fillers, or reinforcements. It has good adhesive and sealant adhesion to oil metals; it can improve adhesion between the inorganic filler or fiber and the polymer; and can be used for glass fiber sizes and finishes, wool insulation resin binders, numerous primer...view more SiSiB® PC2510, or gamma-Ureidopropyltrimethoxysilane, is a clear amber liquid. It is a 100% active ureido silane that may be used to promote adhesion between a range of resins and substrates, fillers, or reinforcements. It has good adhesive and sealant adhesion to oil metals; it can improve adhesion between the inorganic filler or fiber and the polymer; and can be used for glass fiber sizes and finishes, wool insulation resin binders, numerous primers, foundry sand binders, adhesives, sealants and abrasive grinding wheel binders. view less | |
| AFCONA - 2018 | AFCONA Additives Sdn Bhd | AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing and is widely compatible, making it suitable for use in clear and high gloss coatings, and can be used in resin manufacturing as a pre-added defoamer. AFCONA – 2018 finds application in polyurethane coatings for wood, acid-curing coatings for wood and etching/wash primer...view more AFCONA – 2018 is a silicone-free defoaming agent in a xylene solution. This clear to slightly yellow liquid is recommended for systems in which in-can and dry film transparency is required. It functions to prevent the entrapment of air during processing and is widely compatible, making it suitable for use in clear and high gloss coatings, and can be used in resin manufacturing as a pre-added defoamer. AFCONA – 2018 finds application in polyurethane coatings for wood, acid-curing coatings for wood and etching/wash primers, and in NC lacquers for wood. view less | |
| BENDA-LUTZ® 6031 | Benda-Lutz | BENDA-LUTZ® 6031 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6031 has an average particle size of 25 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 6031 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6031 has an average particle size of 25 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6041 | Benda-Lutz | BENDA-LUTZ® 6041 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6041 has an average particle size of 19 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 6041 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6041 has an average particle size of 19 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6042 | Benda-Lutz | BENDA-LUTZ® 6042 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6042 has an average particle size of 13 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 6042 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6042 has an average particle size of 13 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6051 | Benda-Lutz | BENDA-LUTZ® 6051 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6051 has an average particle size of 17 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 6051 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6051 has an average particle size of 17 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6061 | Benda-Lutz | BENDA-LUTZ® 6061 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061 has an average particle size of 13 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 6061 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061 has an average particle size of 13 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6061C | Benda-Lutz | BENDA-LUTZ® 6061C is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061C has an average particle size of 12 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 6061C is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6061C has an average particle size of 12 and a metal content of 68. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6242 | Benda-Lutz | BENDA-LUTZ® 6242 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6242 has an average particle size of 14.5 and a metal content of 73. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 6242 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6242 has an average particle size of 14.5 and a metal content of 73. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENDA-LUTZ® 6282 | Benda-Lutz | BENDA-LUTZ® 6282 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6282 has an average particle size of 9 and a metal content of 65. It is intended for use in one-coat systems, hammer finishes, primer...view more BENDA-LUTZ® 6282 is a non-leafing aluminum pigment. It is spread uniformly throughout the paint film and reflects the streaming light making it suited primarily for toned paints. BENDA-LUTZ® 6282 has an average particle size of 9 and a metal content of 65. It is intended for use in one-coat systems, hammer finishes, primers, ship paints, corrosion protection paints, zinc dust paints, coil coating, can coating, and high-heat resistance paints. view less | |
| BENASOL FL 34 | Benasedo | BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primer...view more BENASOL FL 34 is a fast air drying long oil alkyd resin, modified with aromatic isocyanate, having a pale colour and giving hard and tough films. It is suggested for clear and pigmented finishes with high gloss, high body, excellent brushability and drying. It is employed for silk – glossy paints or flat one-coat wall finishes, pigmented sealers for wood and primers endowed with easy sanding properties and applied by brush or roll. Wide compatibility with medium-long-oil alkyd resins. view less | Request Sample |
| Dynasylan® SILBOND® HT-33 | Evonik Operations GmbH, BL Silanes | Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primer...view more Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder that contains a mixture of silica derived from TEOS and other components. The silica content ranges from 32.7% to 34.0% (as SiO2). This material is formulated for use in two component inorganic zinc-rich primers for corrosion protection. Advantages include improved toughness and excellent performance in high-temperature applications. The improved toughness is a direct result of the higher SiO2 content. view less | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primer...view more DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. view less | Request Sample |
| WorléeThix S 6357 | Worlée-Chemie G.m.b.H. | WorléeThix S 6357 is a long oil thixotropic alkyd resin. This grade has a non volatile content of 45% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. W´Thix S 6357 is especially suitable for the manufacture of anticorrosive primer...view more WorléeThix S 6357 is a long oil thixotropic alkyd resin. This grade has a non volatile content of 45% ± 2. W´Thix S 6357 is completely compatible with most medium and long oil alkyds. W´Thix S 6357 is especially suitable for the manufacture of anticorrosive primers, decorative and building paints as well as thick layer wood glazings. W´Thix S 6357 needs a content of polar substances for the construction of the full rheological properties. Polar solvents should not be added until after the dispersing phase. view less | |
| Finntalc M05SL | Elementis | Finntalc M05SL is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 44% of the particle size <2 µm. It has a top cut particle size of 8.8 µm. It has applications in exterior flat emu...view more Finntalc M05SL is a part of the most tightly defined talc product lines worldwide, with the highest consistency and reproducibility, and has 44% of the particle size <2 µm. It has a top cut particle size of 8.8 µm. It has applications in exterior flat emulsion paints, multi-purpose interior/exterior paints, interior flat emulsion paints, semi-gloss emulsion paints, wood primers, alkyd topcoats, silk and eggshell paints, powder coatings, yacht paints, gel coats, and can/coil/E-coat coatings. view less | Request Sample |
| Eastman™ EEH Solvent | Eastman Chemical B.V. | Eastman™ EEH Solvent (Ethylene Glycol 2-Ethylhexyl Ether) is primarily used in performance specialty coatings applications. It offers an excellent balance of performance properties when used as a coalescent in architectural and industrial maintenance coatings. Eastman™ EEH Solvent has low water miscibility, low surface tension, good hydrolytic stability, and high electrical resistance. In electrodeposition primer...view more Eastman™ EEH Solvent (Ethylene Glycol 2-Ethylhexyl Ether) is primarily used in performance specialty coatings applications. It offers an excellent balance of performance properties when used as a coalescent in architectural and industrial maintenance coatings. Eastman™ EEH Solvent has low water miscibility, low surface tension, good hydrolytic stability, and high electrical resistance. In electrodeposition primers, Eastman™ EEH Solvent reduces volatilization from dip tanks and provides good flow and leveling of the coating in the baking oven. view less | |
| Razeen® SR 5071 Flake | Jubail Chemical Industries Co. | Razeen® SR 5071 Flake is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 comes in a flake form with a softening point value of 77 - 82 °C and is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primer...view more Razeen® SR 5071 Flake is a low melting solid unmodified epoxy resin based on Bisphenol A with narrow molecular weight distribution. This product is characterized by it adhesion properties, flexibility, impact strength, chemicals resistance, and corrosion resistance. Razeen® SR 5071 comes in a flake form with a softening point value of 77 - 82 °C and is designed for use in the formulation of protective and decorative coatings systems such as maintenance coatings, interior pipe coatings, zinc rich primers, marine finishes, floor finishes, and concrete coatings. view less | |
| SiSiB® PC6122 | SiSiB SILICONES | SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primer...view more SiSiB® PC6122 (BTSE) is a clear to straw liquid bis-silanes. As a bis-silyl functional silane, has six hydrolyzable groups and are believed to be more crosslinked than tri- and tetra-functional analogs. It can be used to improve the adhesion of RTV silicone sealants to dry or wet surface, and improve its weather resistance; to formulate chromate-free, water-borne primers to protect metals from corrosion; or to reduce underfilm corrosion and to improve the adhesion of the paint systems even compared to chromate layers. view less | |
| AFCONA - 5044 | AFCONA Additives Sdn Bhd | AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing interfacial tension between pigments or extenders and the vehicle, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5044 is widely compatible in systems from no polarity to high polarity, finding application in primer...view more AFCONA – 5044 is an unsaturated polyamide and acid ester salts in a xylene, n-butanol, and monopropyleneglycol solvent. This transparent yellow to brown liquid functions as a cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites by reducing interfacial tension between pigments or extenders and the vehicle, and by stabilizing the pigments through electric charge repulsion forces. AFCONA – 5044 is widely compatible in systems from no polarity to high polarity, finding application in primers, decorative paints, marine paints, and heavy-duty paints. view less | |
| AFCONA - 3772 | AFCONA Additives Sdn Bhd | AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primer...view more AFCONA – 3772 is a fluorocarbon modified polyacrylate. This clear to slightly yellow liquid functions as a leveling and surface tension reduction agent that increases the polarity of the polymer, making it compatible with common resins used in coatings. It provides no in-can haziness, anti-flooding and floating properties, prevents craters and orange peel, and helps improve substrate wetting performance. AFCONA – 3772 finds application in aqueous and non-aqueous coatings, solvent-based coatings, high gloss clear coatings, pigmented and matted primers, and in printing inks. view less | |
| Pliolak® AS 245 | Omnova Solutions | Pliolak® AS 245 is a short-oil drying alkyd resin based on soya-bean oil. It is compatible with most of short and medium-oil alkyd resins. This product is specially recommended for the formulation of fast drying enamels, as well as bitumens and anticorrosive primer...view more Pliolak® AS 245 is a short-oil drying alkyd resin based on soya-bean oil. It is compatible with most of short and medium-oil alkyd resins. This product is specially recommended for the formulation of fast drying enamels, as well as bitumens and anticorrosive primers. Pliolak® AS 245 may also be used as plasticizer in combination with melamine resins for stoving enamels as well as with nitrocellulose and also for acid curing lacquers. Pliolak® AS 245 is suitable for the formulation of two components clear topcoats for wood furniture, in combination with isocyanates. view less | |
| NECOWEL™ 585 | ASK Chemicals | NECOWEL™ 585 is an aromatic PU-modified alkyd emulsion with short oil length and very fast drying properties. It is especially suited to formulate air-drying and odorless lacquers with fast-drying properties, mainly for indoor applications and primers. In...view more NECOWEL™ 585 is an aromatic PU-modified alkyd emulsion with short oil length and very fast drying properties. It is especially suited to formulate air-drying and odorless lacquers with fast-drying properties, mainly for indoor applications and primers. In acrylic systems, the addition of NECOWEL™ 585 improves brushability and gloss. For industrial applications forced drying (60 – 80 °C) is possible. Coatings based on NECOWEL™ 585 show good adhesion on different substrates, as well as on plastics like polystyrene and ABS. view less | Request Sample |
| ITAMINE CA 488 | DKSH | ITAMINE CA 488 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for high-filled self levelling coating system, mortars, screed and primers. ITAMINE CA 488 cure fast, even at low cure temperatures, and produce coatings and floorin...view more ITAMINE CA 488 is a low viscosity, phenol free, modified cicloalifatic polyamine hardener for high-filled self levelling coating system, mortars, screed and primers. ITAMINE CA 488 cure fast, even at low cure temperatures, and produce coatings and flooring with a good aesthetic appearance, high gloss and good chemical resistance that are therefore used for highly stressed industrial floorings. ITAMINE CA 488 has good resistance to water spotting and also features good blush resistance. This product is available in Spain and Portugal. view less | Request Sample |
| ITAMID FL520/S | DKSH | ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations a...view more ITAMID FL520/S is a liquid epoxy resin modified polyaminoamide-imidazoline. With liquid epoxy resins can be used for primers or adhesion promoters in concrete substrate. It can be applied in wet substrate, in the formulation of adhesives, encapsulations and paints. The principle characteristics are: low viscosity, very good corrosion protection, good making propriety, good adhesion in wet substrate with high percentage of humidity, slight flexibility with high levels of mortar stability and good capacity for reaction at low temperatures and high percentage of humidity. This product is available in Spain and Portugal. view less | Request Sample |
| SmartHide™ | ShayoNano USA, Inc. | SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon zinc oxide composite pigment that can also provide the beneficial functionality of a zinc oxide in a more formula stable manor. This product can be used for ceiling paints, traffic paints, roof coatings, water-based ink, interior and exterior paints, DTM enamel, specialty primer...view more SmartHide™ is a proprietary engineered composite inorganic pigment which is used as a partial replacement for TiO₂ paints without negatively affecting opacity of the dry paint film and no or minimal effect on wet hiding. SmartHide is a patented silicon zinc oxide composite pigment that can also provide the beneficial functionality of a zinc oxide in a more formula stable manor. This product can be used for ceiling paints, traffic paints, roof coatings, water-based ink, interior and exterior paints, DTM enamel, specialty primers, and paper coatings. view less | |
| CoatOSil* T-Cure Silane Oligomer | Momentive | CoatOSil* T-Cure Silane Oligomer may be useful in the development of coating formulations, such as Polyaspartic and 2K Polyurethane systems, where reactivity with a mercapto silane is desirable. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primer...view more CoatOSil* T-Cure Silane Oligomer may be useful in the development of coating formulations, such as Polyaspartic and 2K Polyurethane systems, where reactivity with a mercapto silane is desirable. This patented oligomer is low in odor compared to standard mercapto silanes and can display a trio of reactive chemistries. In addition to thiol groups, silanol and diols are generated upon the hydrolysis of the silane. It behaves as a reactive diluent within a coating formulation, and is recommended for industrial maintenance applications, automotive, appliance, and coil applications; epoxy primers for metals and flooring, and aurospace and automotive refinishing applications. view less |
