| SUPRASEC 2416 | Huntsman Polyurethanes EMEAI | Suprasec 2416, diphenylmethane diisocyanate (MDI) prepolymer, is a clear brownish liquid. The product has an average functionality of 2.1. Suprasec 2416 is recommended for use in the manufacture of coatings, adhesives and elastomers. This product, of low functionality and low viscosity, is ideally suited for use in fast cure one component systems as primer and/or sealer. Polyurethanes based on Suprasec 2416 are used in a wide variety of applications including: protective coatings, industrial floor coatings and primers fast cure concrete primer...view more Suprasec 2416, diphenylmethane diisocyanate (MDI) prepolymer, is a clear brownish liquid. The product has an average functionality of 2.1. Suprasec 2416 is recommended for use in the manufacture of coatings, adhesives and elastomers. This product, of low functionality and low viscosity, is ideally suited for use in fast cure one component systems as primer and/or sealer. Polyurethanes based on Suprasec 2416 are used in a wide variety of applications including: protective coatings, industrial floor coatings and primers fast cure concrete primer, which acts as a damp cure membrane soil stabilisation, and hydro-active grout. view less | |
| Ucopol M 603 | S.A.P.I.C.I. SpA | Ucopol M 603 is a moisture-curing prepolymer. This product is solvent-free and odourless. It can be used as a primer for concrete. The end product will show good levelling and wettability. This product has a shorter cross-linking time than Ucopol M 60...view more Ucopol M 603 is a moisture-curing prepolymer. This product is solvent-free and odourless. It can be used as a primer for concrete. The end product will show good levelling and wettability. This product has a shorter cross-linking time than Ucopol M 602. view less | |
| SUPRASEC 9584 | Huntsman Polyurethanes EMEAI | SUPRASEC 9584, diphenylmethane diisocyanate (MDI) prepolymer, is a clear brownish liquid. The product has an average functionality of 2.7. SUPRASEC 9584 is recommended for use in the manufacture of two component primers. This product, of high functionalit...view more SUPRASEC 9584, diphenylmethane diisocyanate (MDI) prepolymer, is a clear brownish liquid. The product has an average functionality of 2.7. SUPRASEC 9584 is recommended for use in the manufacture of two component primers. This product, of high functionality and low viscosity, is developed in such a way that it is readily dispersable in modified castor oil without the addition of surface active agents. SUPRASEC 9584 is recommended for use in two component primer applications for concrete or wood. Concrete primers with a long potlife can be formulated from SUPRASEC 9584 and modified castor oil (like albodur 912). Additives can be formulated for enhanced processing and to adjust dry times. view less | |
| Suprasec® 2060 | Huntsman Polyurethanes EMEAI | Suprasec® 2060 is a prepolymerised and reactivity modified diphenyl methane diisocyanate (MDI) for use in the formulation of one component (1k), long potlife, quick cure primers. | |
| Quasilan CT 23 | Baxenden Chemicals Ltd. | Quasilan CT 23, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Quasilan CT 29 | Baxenden Chemicals Ltd. | Quasilan CT 29, in the form of a clear liquid, is a moisture curing product based on TDI pre-polymers. It has main application uses in binders, primers, and surface coatings such as concrete, jointing sands, and stone. | |
| Diacetone Alcohol | Monument Chemical | Diacetone Alcohol is a colorless, clear liquid ketone alcohol. It is intended for use as a chemical intermediate in the preparation of Methyl Isobutyl Ketone and Hexylene Glycol. This product is used in household cleaners, pharmaceutical preparations, sealants, inks, industrial coatings, pesticides, paints, primer...view more Diacetone Alcohol is a colorless, clear liquid ketone alcohol. It is intended for use as a chemical intermediate in the preparation of Methyl Isobutyl Ketone and Hexylene Glycol. This product is used in household cleaners, pharmaceutical preparations, sealants, inks, industrial coatings, pesticides, paints, primers, paint thinners and paint removers. view less | |
| 2-Ethylhexanoic Acid, 2-EHA | BASF SE, Intermediates Division | 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethy...view more 2-Ethylhexanoic Acid, 2-EHA is a building block for alkyd resins and for production of organic metal salts. Alkyd resins modified with 2-ethylhexanoic acid are used in stoving enamels and two-component paints (primers and topcoats). Metal salts of 2-ethylhexanoic acid are used for siccatives in oxidative drying paints and printing inks. view less | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. view less | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. view less | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...view more MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. view less | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...view more MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. view less | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. view less | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...view more MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. view less | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...view more MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Low | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primer...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Low is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 45% to 55%, linoleic acid (conjugated) is 35% to 45%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), Medium | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primer...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 30% to 45%, linoleic acid (conjugated) is 45% to 60%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Dehydrated Castor Oil Fatty Acid (DCOFA), High | Castor International BV | Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primer...view more Dehydrated Castor Oil Fatty Acid (DCOFA), Medium is a high diene fatty acid. DCOFA is a liquid that has a white to pale yellow color. Its linoleic acid (non-conjugated) is 25% to 30%, linoleic acid (conjugated) is 60% to 66%, and the conjugation by UV spectrometer of 50 min. Dehydrated castor oil fatty acid based alkyd resins and polyamides make up superior constituent in numerous print inks and paint formulations. DCOFA is also used in the manufacture of high solid alkyds, acrylic and epoxy ester resins, which are useful for appliance finishes, automotive topcoats, coil coatings, primers, interior and exterior can coatings, tube coatings, overprint varnishes, marine finishes and high-speed printing inks. view less | |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. |
