| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| Digicer Primer 008 | Zschimmer & Schwarz GmbH & Co. KG Chemische Fabriken | Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printi...view more Digicer Primer 008, in the form of a transparent liquid, is a mix of derivatives from ethylene and propylene oxides. This product can be used as a film-former on the surface of a glaze, in order to create an uniform suction behavior of the applied printing ink by the glaze, which creates good preconditions for the decoration by digital printing technology. It decreases the vapour pressure of the water, which avoids condensation on the printing heads. It also improves the application of colour and reduces defects from inexact adjustment of the printing heads. view less | |
| Special-Primer PP 7560 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Sp...view more Special-Primer PP 7560 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 10.0% ± 0.5. In most cases the adhesion promotion of Special-Primer PP 7560 is superior to Special-Primer PP 5130. This product appears as a yellowish, low viscous liquid. view less | |
| Special-Primer AP 1030 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used ...view more Special-Primer AP 1030 is an adhesion promoter for thermoplastic elastomers, EPDM rubber, and untreated polyolefins. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. Special-Primer AP 1030 is widely used to solve adhesion problems to flexible substrates like thermoplastic elastomers, thermoplastic polyurethane and EPDM (e.g. "Vistalon" from Exxon, "Nordel" from DuPont). After coating with a thin film of Special-Primer AP 1030, these flexible substrates can be painted, printed, glued or labelled. Special-Primer AP 1030 is tinted white for black substrates. view less | |
| Special-Primer PP 7550 | Worlée-Chemie G.m.b.H. | Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in a...view more Special-Primer PP 7550 is an adhesion promoter mainly for untreated polypropylene. It may also improve the adhesion on other plastics or different substrates. This grade has a non-volatile content of 5.0% ± 0.3. Special-Primer PP 7550 is only soluble in aromatics and chlorinated hydrocarbons. It is possible to blend with other solvents like esters, ketones etc.. This product appears as a yellowish, low viscous liquid. view less | |
| Adhesion Reinforcing Primer/B3325 | Tianjin Boyuan New Materials Co., Ltd. | B3325 is a kind of water based primer which was especially for film/sheet adhesion reinforcing. It can improve surface performance and ensure excellent adhesion between the coating and the base material. | |
| Anti-static Primer/B3320K | Tianjin Boyuan New Materials Co., Ltd. | B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation. | |
| Special-Primer PE 6800 | Worlée-Chemie G.m.b.H. | Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Spec...view more Special-Primer PE 6800 is an adhesion promoter developed especially for polyethylene. This grade has a non-volatile content of 5.0% ± 0.3. After treatment with PE 6800, polyethylene can be painted, printed, glued or labelled like any other substrate. Special Primer PE 6800 is suitable as an adhesion promoter for polyethylene of high, medium and low density (lowdensity-polyethylene). This product appears as a yellowish to brown, low viscous liquid. view less | |
| Special-Primer AP 1010 | Worlée-Chemie G.m.b.H. | Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, an...view more Special-Primer AP 1010 is a special adhesion promoter for thermoplastic elastomers, EPDM rubber, as well as for untreated polypropylene. It is compatible with alcohol and can be used in aerosol cans. This grade has a non-volatile content of 4.0% ± 0.3, and it appears as a milky, low viscous liquid. view less | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...view more Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. view less | |
| Special-Primer PP 5130 (5% In Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlo...view more Special-Primer PP 5130 (5% In Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 5.0% ± 0.3 and is delivered in 5% xylene. Special-Primer PP 5130 is compatible with low viscosity grades of chlorinated rubber and some vinyl copolymer resins. It is only soluble in aromatics and chlorinated hydrocarbons. There is limited solubility in aliphatic hydrocarbons. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| Special-Primer PP 5130 (2.5% I Xylene) | Worlée-Chemie G.m.b.H. | Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled po...view more Special-Primer PP 5130 (2.5% I Xylene) is an adhesion promoter developed especially for polypropylene. This grade has a non-volatile content of 2.5% ± 0.3. Special-Primer PP 5130 is suitable to solve adhesion problems with untreated or with talc filled polypropylene. After treatment with PP 5130 the polypropylene can be painted, printed, glued or labelled like any other substrate. view less | |
| 3# Water-Based Sealing Coating | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | 3# Water-Based Sealing Coating is a transparent coating. It is used as a coating for its transparency, and adhesion. It is commonly used in various kinds of primer and does not change the properties of the primer. | |
| ADDITOL® VXL 4950 | Allnex | ADDITOL® VXL 4950 is an adhesion promoting primer for plastics. | Request Sample |
| SP-142 | NuSil Silicone Technology 1 | SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, i...view more SP-142 is a translucent silicone primer that is specially designed to be used with platinum-cured systems on polycarbonates. This one-component primer is supplied in VM&P Naphtha and requires no mixing. When brushed, wiped, or dipped on a polycarbonate, it will help improve the adhesion with addition-cured systems. view less | |
| Amorphic™ C120 | Bunge Amorphic Solutions, LLC. | Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer...view more Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. view less | |
| Amorphic™ I200 | Bunge Amorphic Solutions, LLC. | Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer...view more Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. view less | |
| Curing Agent V4 | Ichemco | Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage t...view more Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent C8 | Ichemco | Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to...view more Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...view more SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. view less | |
| Curing Agent V3 | Ichemco | Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive ancho...view more Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| SP-120 | NuSil Silicone Technology 1 | SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of ...view more SP-120 is a silicone primer that is formulated for use with one and two-part RTV systems, and does not need mixing.The translucent color of SP-120 helps to preserve visibility with other translucent products. This primer will also improve the adhesion of the RTV systems to other substrates such as metals, ceramics, glass, and wood. view less | |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...view more SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. view less | |
| CF1-135 | NuSil Silicone Technology 1 | CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different subst...view more CF1-135 is high technology translucent silicone primer that is specifically formulated for use with platinum cured systems where conventional primers are insufficient. This product can help improve the adhesion of addition-cured systems to different substrates such as metals, ceramics, glass, some plastics and other silicone material. It is a one-component primer that is supplied in VM&P Napththa and it requires no mixing. view less | |
| CF1-141 | NuSil Silicone Technology 1 | CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air...view more CF1-141 is a high technology silicone primer that is specially formulated to be used with platinum-cured systems and is colored red to provide an easy visual determination of surface coverage. It is a lower Volatile Organic Component (VOC) product and air dries. This primer improves adhesion of addition-cured systems to various substrates such as glass, metals, plastics, ceramics and other silicone materials. view less | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...view more SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. view less | |
| 801-C Organic Bentonite Rheologic Additives | Zhejiang Qinghong New Material Co., Ltd. | 801-C Organic Bentonite Rheologic Additives is widely used in wood primer and ink. It has better dispersion and thickening capacity than traditional organic clay. | |
| Curing Agent MDI | Ichemco | Curing Agent MDI is a polyisocyanate in a liquid form. This product is most commonly used as a curing and cross-linking agent in solvent-based primer and adhesive applications. | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| Dynasylan® HYDROSIL 2627 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2627 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| Tohmide TXS-53C | Sanho Chemical Co., Ltd. | Tohmide TXS-53C is a self-emulsifiable epoxy curing agent in a yellow-brown liquid form. This product has a viscosity of 3000-12,500 mPa.s. Tohmide TXS-53C is most commonly used in concrete primer formulation applications. | |
| Raybo 111 Powder Additive | Raybo Chemical | Raybo 111 Powder Additive is a polysilicone glycol surfactant on an inert amorphous silica base in a free-flowing white powder form. This product is most commonly used as a wetting agent in epoxy primer and topcoat applications. | |
| Anquamine® 287 Waterborne Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer...view more Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. view less | Request Sample |
| Kingmide 150-50 | Sanho Chemical Co., Ltd. | Kingmide 150-50 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 150-50 is most commonly used in primer coating formulation applications. | |
| 10 AS Wollastocoat® | NYCO Minerals, Inc. | 10 AS Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sac...view more 10 AS Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sacrificing performance. view less | |
| 10 ES Wollastocoat® | NYCO Minerals, Inc. | 10 ES Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sac...view more 10 ES Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sacrificing performance. view less | |
| Curing Agent RF/AE | Ichemco | Curing Agent RF/AE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-29%. Curing Agent RF/AE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| HARDLEN HM-21P | DKSH | HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARD...view more HARDLEN HM-21P is an adhesion promoter for polyolefin. It has an excellent adhesion to polyolefin. HARDLEN HM-21P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatments such as plasma, flame and surface-cleaning by solvent. HARDLEN HM-21P main characteristics are: good adhesion to PP, TPO(Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatment, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint, excellent resistance against Water, Gasoline and Gasohol after top-coating. This product is available in Europe and North America. view less | Request Sample |
| Curing agent RF/AE DE | Ichemco | Curing agent RF/AE DE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-27%. Curing agent RF/AE DE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Kingmide 300-65 | Sanho Chemical Co., Ltd. | Kingmide 300-65 is a polyamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a total solids content of 63-67%. Kingmide 300-65 is most commonly used in heavy-duty primer coating formulation applications. | |
| DC Sealing Coating | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the prime...view more DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the primer. view less | |
| Kingmide 305-31 | Sanho Chemical Co., Ltd. | Kingmide 305-31 is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-31MI | Sanho Chemical Co., Ltd. | Kingmide 305-31MI is a polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 29-33%. Kingmide 305-31MI is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-50 | Sanho Chemical Co., Ltd. | Kingmide 305-50 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 48-52%. Kingmide 305-50 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-60 | Sanho Chemical Co., Ltd. | Kingmide 305-60 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 58-62%. Kingmide 305-60 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70 | Sanho Chemical Co., Ltd. | Kingmide 305-70 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70 is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 305-70X | Sanho Chemical Co., Ltd. | Kingmide 305-70X is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 68-72%. Kingmide 305-70X is most commonly used in heavy-duty primer coating formulation applications. | |
| Kingmide 315-80 | Sanho Chemical Co., Ltd. | Kingmide 315-80 is a reactive polyamide-type epoxy resin curing agent in a brown-colored viscous liquid form. This product has a total solids content of 78-82%. Kingmide 315-80 is most commonly used in heavy-duty primer coating formulation applications. | |
| Curing Agent D | Ichemco | Curing Agent D is a diisocyanate in a liquid solution form. This product has a total solids content of 64-66%. Curing Agent D is most commonly used as a curing and cross-linking agent in coating, adhesive, primer, and paint applications. | |
| Gasil® 23D | PQ Corporation | Gasil® 23D is a synthetic amorphous silica. Used in primer coats of Diazo papers, to provide absorptive layer for active chemicals. Thickening agent and viscosity modifier. Antiblocking of high clarity polypropylene and PVC films. Anti-caking agent for fo...view more Gasil® 23D is a synthetic amorphous silica. Used in primer coats of Diazo papers, to provide absorptive layer for active chemicals. Thickening agent and viscosity modifier. Antiblocking of high clarity polypropylene and PVC films. Anti-caking agent for foods, pharmaceuticals and fine powders. view less | |
| BP®-183-A7 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BP®-183-A7 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of high polarity. It offers high gelling efficiency, reproducible thixotropic consistency, and particle suspension. This product is recommended for acrylic paints, container paints, industrial paint, primer...view more BP®-183-A7 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of high polarity. It offers high gelling efficiency, reproducible thixotropic consistency, and particle suspension. This product is recommended for acrylic paints, container paints, industrial paint, primer paint, inks, and lacquers. view less | |
| Kingcure M-510 | Sanho Chemical Co., Ltd. | Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation appli...view more Kingcure M-510 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 500-2000 mPa.s and a specific gravity of 1.13. Kingcure M-510 is most commonly used in primer coating formulation applications. view less | |
| Kingcure M-510BS | Sanho Chemical Co., Ltd. | Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation ap...view more Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation applications. view less | |
| Kingcure M-530 | Sanho Chemical Co., Ltd. | Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applic...view more Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applications. view less | |
| NEVOSIL® SI 7200 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® SI 7200, in the form of a transparent, yellowish liquid, is a silane/siloxane mixture. This product imparts water-repellency to absorbent, porous and mineral-based construction materials. It can also be used as a water-repellent primer for inte...view more NEVOSIL® SI 7200, in the form of a transparent, yellowish liquid, is a silane/siloxane mixture. This product imparts water-repellency to absorbent, porous and mineral-based construction materials. It can also be used as a water-repellent primer for interior or exterior coating applications. view less | |
| NEVOSIL® SI 7206 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® SI 7206, in the form of a clear, colorless liquid, is a silane/siloxane solution. This product imparts water-repellency to absorbent, porous and mineral-based construction materials. It can also be used as a water-repellent primer for interior ...view more NEVOSIL® SI 7206, in the form of a clear, colorless liquid, is a silane/siloxane solution. This product imparts water-repellency to absorbent, porous and mineral-based construction materials. It can also be used as a water-repellent primer for interior or exterior coating applications. view less | |
| LT-560 | BlueSky Chemical Co., Ltd. | LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its de...view more LT-560 is a γ-glycidoxypropyltrimethoxysilane, a bifunctional silane possessing a reactive organic epoxide and hydrolysable inorganic methoxysilyl groups. This product can be used as a primer or additive in paints, coatings, sealants and adhesives. Its density at 25 degrees Celsius is 1.07 g/ml. view less | |
| BP®-183-B3 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BP®-183-B3 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, high viscosity, and excellent thickening properties. This product is recommended for furniture primer pain...view more BP®-183-B3 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, high viscosity, and excellent thickening properties. This product is recommended for furniture primer paint, printing inks, adhesives, caulks, sealants, and more. view less | |
| MONORAL® 4000X | HS CHEM CO.,LTD | MONORAL® 4000X is a concentrated soft light yellow paste of polyolefin wax dispersed in xylene to impart control pigment settling for industrial solvent based coatings. This product is often used in industrial coatings, heavy duty coatings, oil-based paint, wash primer...view more MONORAL® 4000X is a concentrated soft light yellow paste of polyolefin wax dispersed in xylene to impart control pigment settling for industrial solvent based coatings. This product is often used in industrial coatings, heavy duty coatings, oil-based paint, wash primer, and traffic paints. view less | |
| MONORAL® 4000NT | HS CHEM CO.,LTD | MONORAL® 4000NT is a soft light yellow paste of polyolefin wax dispersed in low toxic aromatic solvent to provide anti-settling properties for industrial solvent based coatings. This product is used in industrial coatings, heavy duty coatings, oil-based paints, wash primer...view more MONORAL® 4000NT is a soft light yellow paste of polyolefin wax dispersed in low toxic aromatic solvent to provide anti-settling properties for industrial solvent based coatings. This product is used in industrial coatings, heavy duty coatings, oil-based paints, wash primer, and traffic paints. view less | |
| LT-602 | BlueSky Chemical Co., Ltd. | LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/m...view more LT-602 is an N-(β-aminoethyl)-γ-aminopropylmethyldimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion promoter in paints and coatings. Its density at 25 degrees Celsius is 0.98 g/ml. view less | |
| LT-792 | BlueSky Chemical Co., Ltd. | LT-792 is a N-(2-aminoethyl)-3-aminopropyltrimethoxysilane. This product can be used as a primer or additive in adhesives and sealants. It can also be used as an adhesion improver in paints and coatings. Its density at 25 degrees Celsius is 1.03 g/ml. | |
| BK-127 | LUKEM D.O.O. | BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It...view more BK-127 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrsoion, bituminous, container, industrial, marine, primer, silica, and solvent epoxy. It is also used in inks and nitro lacquer. view less | |
| BK–884A | LUKEM D.O.O. | BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives...view more BK-884A is a white, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including alkyd, acrylic, anti-corrosion, chlorinated, primer, polyester, road, silica, and wooden. It is also used in adhesives, varnishes, inks, nitro lacquer, and sealants. view less | |
| Stainban® 185 | WPC Technologies, Inc. | Stainban® 185 is an aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 17.5-19.0% and a specific gravity of 1.27-1.35 g/cm3. It is most commonly used in water-based primer applications intended for w...view more Stainban® 185 is an aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 17.5-19.0% and a specific gravity of 1.27-1.35 g/cm3. It is most commonly used in water-based primer applications intended for wood protection. view less | |
| Stainban® 186 | WPC Technologies, Inc. | Stainban® 186 is a zinc-free, odorless, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 41-43% and a specific gravity of 1.5-1.6 g/cm3. It is most commonly used in water-based primer applications. | |
| BS-1C-HD Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BS-1C-HD is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of medium to high polarity. It offers high gelling efficiency, reproducible thixotropic consistency, and particle suspension properties. This product is recommended for alkyd paints, industrial paints, primer...view more BS-1C-HD is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of medium to high polarity. It offers high gelling efficiency, reproducible thixotropic consistency, and particle suspension properties. This product is recommended for alkyd paints, industrial paints, primer paints, road paints, adhesives, and more. view less | |
| HFGEL-120-B3 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | HFGEL-120-B3 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, high viscosity, excellent thickening, and particle suspension properties. This product is recommended for furniture primer...view more HFGEL-120-B3 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, high viscosity, excellent thickening, and particle suspension properties. This product is recommended for furniture primer paint, printing inks, adhesives, caulks, sealants, and more. view less | |
| HFGEL-120-HA Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | HFGEL-120-HA is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy, high viscosity, and particle suspension. This product is recommended for acrylic paints, baking paints, primer...view more HFGEL-120-HA is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy, high viscosity, and particle suspension. This product is recommended for acrylic paints, baking paints, primer paints, inks, adhesives, sealants, and more. view less | |
| HFGEL-120-HD Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | HFGEL-120-HD is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of medium to high polarity. It offers high gelling efficiency, reproducble thixotropic consistency, and imparts particle suspension. This product is recommended for alkyd paints, industrial paints, primer...view more HFGEL-120-HD is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of medium to high polarity. It offers high gelling efficiency, reproducble thixotropic consistency, and imparts particle suspension. This product is recommended for alkyd paints, industrial paints, primer paints, road paints, adhesives, and more. view less | |
| BP-500A-11 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BP-500A-11 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low, medium and high polarity. It offers high gelling efficiency, high viscosity, excellent thickening, and particle suspension properties. This product is recommended for alkyd paints, bituminous paints, primer...view more BP-500A-11 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low, medium and high polarity. It offers high gelling efficiency, high viscosity, excellent thickening, and particle suspension properties. This product is recommended for alkyd paints, bituminous paints, primer paint, inks, adhesives, and more. view less | |
| BS-1C-5 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BS-1C-5 is a high-performance rheology modifier for use in low to high polarity solvent systems. It has ideal thixotropy property, anti-sagging property and anti-sediment property. It can used in finishes, adhesives, glazes, primer paint and printing inks...view more BS-1C-5 is a high-performance rheology modifier for use in low to high polarity solvent systems. It has ideal thixotropy property, anti-sagging property and anti-sediment property. It can used in finishes, adhesives, glazes, primer paint and printing inks. It doesn’t need any activators. view less | |
| HFGEL-120-A6 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | HFGEL-120-A6 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy, and particle suspension properties. This product is recommended for acrylic paints, baking paints, primer...view more HFGEL-120-A6 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy, and particle suspension properties. This product is recommended for acrylic paints, baking paints, primer paints, road paints, inks, adhesives, sealants, and more. view less | |
| BP®-183-D Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BP®-183-D is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of medium to high polarity. It offers high gelling efficiency, reproducible thixotropic consistency, and particle suspension properties. This product is recommended for alkyd paints, industrial paints, primer...view more BP®-183-D is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of medium to high polarity. It offers high gelling efficiency, reproducible thixotropic consistency, and particle suspension properties. This product is recommended for alkyd paints, industrial paints, primer paints, road paints, lacquers, adhesives, and more. view less | |
| BP®-183-H Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BP®-183-H is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy, high viscosity, and particle suspension. This product is recommended for baking paints, bituminous paints, primer...view more BP®-183-H is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy, high viscosity, and particle suspension. This product is recommended for baking paints, bituminous paints, primer paint, road paint, inks, adhesives, and more. view less | |
| BP®-183-C Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BP®-183-C is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity. It offers high gelling efficiency, ideal thixotropy, and particle suspension properties. This product is recommended for anti-corrosion paints, marine paints, primer...view more BP®-183-C is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity. It offers high gelling efficiency, ideal thixotropy, and particle suspension properties. This product is recommended for anti-corrosion paints, marine paints, primer paints, inks, adhesives, sealants, and more. view less | |
| HARDLEN F-6P | DKSH | HARDLEN F-6P is an adhesion promoter for polyolefin. HARDLEN F-6P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatment such as plasma, flame and surface-cleaning by solvent. HARDLEN F-6P main characteristics are: good adhesion ...view more HARDLEN F-6P is an adhesion promoter for polyolefin. HARDLEN F-6P is used as a pigmented primer on PP/EPDM bumper and TPO without any pretreatment such as plasma, flame and surface-cleaning by solvent. HARDLEN F-6P main characteristics are: good adhesion to PP, TPO (Thermoplastic Olefin Elastomer), PP/EPDM, EPDM and Metal substrates without some physical and chemical pre-treatments, such as "framing treatment", excellent interlayer adhesion between primer and topcoat-paint. (polyester-melamine-paint or polyurethane-paint), excellent resistance against Water, Gasoline and Gasohol resistance after top-coating, low temperature baking is available, good compatibility with other resins and good stability in low temperature. This product is available in Europe and North America. view less | Request Sample |
| LT-590 | BlueSky Chemical Co., Ltd. | LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. It...view more LT-590 is a γ-mercaptopropyl trimethoxysilane, also known as a bifunctional organosilane possessing a reactive organic mercapto and a hydrolysable inorganic methoxysilyl group. This product can be used as a primer or additive in sealants and adhesives. Its density at 25 degrees Celsius is 1.057 g/ml. view less | |
| CYMEL® UI-27-EI | Allnex | CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is no...view more CYMEL® UI-27-EI resin is a partially iso-butylated urea resin supplied in a mixture of ethanol and iso-butanol. It is suitable for use in both acid curing wood coating applications and general industrial primer and topcoat formulations. This product is not suitable for exterior applications. view less | Request Sample |
| BK-883 | LUKEM D.O.O. | BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It ...view more BK-883 is a light yellow, free flowing powder that functions as a rheological additive. This product is used in a variety of paints, including acrylic, alkyd, anti-corrosion, bituminous, primer, polyester, baking, chlorinated rubber, marine, and road. It is also used in adhesives, inks, putties, and sealants. view less | |
| Stainban® 187 | WPC Technologies, Inc. | Stainban® 187 is a zinc free, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 28-36% and a specific gravity of 1.37-1.41 g/cm3. It is most commonly used in water-based primer applications intended...view more Stainban® 187 is a zinc free, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 28-36% and a specific gravity of 1.37-1.41 g/cm3. It is most commonly used in water-based primer applications intended for wood protection. view less | |
| MONORAL® 420-20 | HS CHEM CO.,LTD | MONORAL® 420-20 is a light yellow hard paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic pa...view more MONORAL® 420-20 is a light yellow hard paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint, and industrial coating systems. view less | |
| MONORAL® 60X | HS CHEM CO.,LTD | MONORAL® 60X is a hard light yellow paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint...view more MONORAL® 60X is a hard light yellow paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint, enamels, and industrial coating systems. view less | |
| HFGEL-120-HS Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | HFGEL-120-HS is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, consistent rheology and thixotropy development, and good anti-sagging properties. This product is recommended for acrylic paints, lacquers, primer...view more HFGEL-120-HS is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, consistent rheology and thixotropy development, and good anti-sagging properties. This product is recommended for acrylic paints, lacquers, primer paints, inks, adhesives, varnishes, and more. view less | |
| BP®-183-B5 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BP®-183-B5 is a high-performance rheology modifier for use in low to high polarity solvent systems. It has ideal thixotropy property, anti-sagging property and anti-sediment property. It can used in finishes, adhesives, glazes, primer paint and printing i...view more BP®-183-B5 is a high-performance rheology modifier for use in low to high polarity solvent systems. It has ideal thixotropy property, anti-sagging property and anti-sediment property. It can used in finishes, adhesives, glazes, primer paint and printing ink. It does not require an activator. view less | |
| HFGEL-120-B5 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | HFGEL-120-B5 is a high-performance rheology modifier for use in low to high polarity solvent system. It has ideal thixotropy property, anti-sagging property and anti-sediment property. It can used in finish, adhesives, glazes, primer paint and printing in...view more HFGEL-120-B5 is a high-performance rheology modifier for use in low to high polarity solvent system. It has ideal thixotropy property, anti-sagging property and anti-sediment property. It can used in finish, adhesives, glazes, primer paint and printing ink applications. It does not require any activators. view less | |
| HFGEL-120-HG Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | HFGEL-120-HG is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity. It offers high gelling efficiency, ease of incorporation, consistent rheology, and excellent sag resistance. This product is recommended for adhesives, primer...view more HFGEL-120-HG is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity. It offers high gelling efficiency, ease of incorporation, consistent rheology, and excellent sag resistance. This product is recommended for adhesives, primer paints, road paints, silica paints, varnishes, inks, and more. view less | |
| AC-65 | Ark (Fogang) Chemicals Industry Co., Ltd. | AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for ...view more AC-65 is a γ-Aminopropyl triethoxysilane with the chemical formula H2NC3H6Si(OC2H5)3 and comes as a clear to slightly yellowish liquid. Primarily used as a primer or additive in phenolic resin. It can be used as a pre-treatment in filler and pigments for adhesive and sealant production. view less | |
| LT-540 | BlueSky Chemical Co., Ltd. | LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhe...view more LT-540 is a γ-aminopropyltrimethoxysilane and a bifunctional organosilane possessing a reactive primary amine and hydrolysable inorganic methoxysilyl groups. This product can be used as an additive and primer for chemical modification of sealants and adhesives and in polymers. Its density at 25 degrees Celsius is 1.01 g/ml. view less | |
| Zinc Dust-NZD 1620 | Numinor Chemical Industries Ltd. | Zinc Dust-NZD 1620 is a zinc dust in the form of a fine gray powder. It has and average particle size of 5-8 microns and a specific gravity of 7.1. Zinc Dust-NZD 1620 can be used in metal protective coating, metal primer, and other paint and coating appli...view more Zinc Dust-NZD 1620 is a zinc dust in the form of a fine gray powder. It has and average particle size of 5-8 microns and a specific gravity of 7.1. Zinc Dust-NZD 1620 can be used in metal protective coating, metal primer, and other paint and coating applications. view less | |
| Zinc Dust-NZD 1622 | Numinor Chemical Industries Ltd. | Zinc Dust-NZD 1622 is a zinc dust in the form of a fine gray powder. It has and average particle size of 3.5-5.5 microns and a specific gravity of 7.1. Zinc Dust-NZD 1622 can be used in metal protective coating, metal primer, and other paint and coating a...view more Zinc Dust-NZD 1622 is a zinc dust in the form of a fine gray powder. It has and average particle size of 3.5-5.5 microns and a specific gravity of 7.1. Zinc Dust-NZD 1622 can be used in metal protective coating, metal primer, and other paint and coating applications. view less | |
| Zinc Dust-NZD 1625 | Numinor Chemical Industries Ltd. | Zinc Dust-NZD 1625 is a zinc dust in the form of a fine gray powder. It has and average particle size of 2.5-4.5 microns and a specific gravity of 7.1. Zinc Dust-NZD 1625 can be used in metal protective coating, metal primer, and other paint and coating a...view more Zinc Dust-NZD 1625 is a zinc dust in the form of a fine gray powder. It has and average particle size of 2.5-4.5 microns and a specific gravity of 7.1. Zinc Dust-NZD 1625 can be used in metal protective coating, metal primer, and other paint and coating applications. view less | |
| BS-1C-HE Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BS-1C-HE is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It is recommended for good gelling efficiency, thixotropy, good viscosity and thickening properties, and particle suspension. This product is recommended for acrylic paints, baking paints, sealants, primer...view more BS-1C-HE is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It is recommended for good gelling efficiency, thixotropy, good viscosity and thickening properties, and particle suspension. This product is recommended for acrylic paints, baking paints, sealants, primer paints, road paints, and more. view less | |
| HFGEL-120-HF Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | HFGEL-120-HF is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ease of incorporation, excellent sag resistance, and control of viscosity. This product is recommended for acrylic paints, adhesives, primer...view more HFGEL-120-HF is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ease of incorporation, excellent sag resistance, and control of viscosity. This product is recommended for acrylic paints, adhesives, primer paints, road paints, varnishes, inks, sealants, and more. view less | |
| Delaphos® 4 | Delaphos | Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...view more Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. view less | |
| Delaphos® 2 | Delaphos | Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...view more Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. view less | |
| Delaphos® 2M | Delaphos | Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...view more Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. view less | |
| HFGEL-120-HH Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | HFGEL-120-HH is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy and anti-sediment properties, and particle suspension properties. This product is recommended for acrylic paints, baking paints, primer...view more HFGEL-120-HH is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy and anti-sediment properties, and particle suspension properties. This product is recommended for acrylic paints, baking paints, primer paints, road paints, inks, adhesives, sealants, and more. view less | |
| BP®-183-W Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BP®-183-W is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity. It offers high gelling efficiency, high viscosity, excellent thickening, and particle suspension properties. This product is recommended for alkyd paints, marine paints, primer...view more BP®-183-W is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,medium and high polarity. It offers high gelling efficiency, high viscosity, excellent thickening, and particle suspension properties. This product is recommended for alkyd paints, marine paints, primer paints, road paints, inks, adhesives, sealants, and more. view less | |
| BS-1C-H0 Rheology Modifier | Zhejiang Fenghong New Material Co., Ltd. (Zhejiang Huate New Material Co., Ltd.) | BS-1C-H0 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy, high viscosity, and particle suspension properties. This product is recommended for acrylic paints, baking paints, primer...view more BS-1C-H0 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low to medium polarity. It offers high gelling efficiency, ideal thixotropy, high viscosity, and particle suspension properties. This product is recommended for acrylic paints, baking paints, primer paints, road paints, inks, adhesives, sealants, lubricating greases, and more. view less |
