| 7A SP20 | LEHVOSS Group | 7A SP20 is a highly refined kaolin of ultra fine particle size and high brightness from deposits in North West France. | |
| ADM 1000 | LEHVOSS Group | ADM 1000 is an amber fluid, APE/VOC-free, polyether polyol nonionic surfactant. It is used in conjunction with a primary dispersant to enhance adsorption of the dispersant onto the pigment surface. It also controls dispersion rheology, increases pigment l...view more ADM 1000 is an amber fluid, APE/VOC-free, polyether polyol nonionic surfactant. It is used in conjunction with a primary dispersant to enhance adsorption of the dispersant onto the pigment surface. It also controls dispersion rheology, increases pigment loading, and enhances dispersion stability. This product is soluble in water, ethanol, mineral spirits, propylene glycol, toluene, and xylene. view less | |
| ADM 1500 | LEHVOSS Group | ADM 1500 is an opaque liquid, APE/VOC free, polyether polyol nonionic surfactant. It is used in conjunction with a primary dispersant to enhance adsorption of the dispersant onto the pigment surface. ADM 1500 and the selected dispersant should be fully in...view more ADM 1500 is an opaque liquid, APE/VOC free, polyether polyol nonionic surfactant. It is used in conjunction with a primary dispersant to enhance adsorption of the dispersant onto the pigment surface. ADM 1500 and the selected dispersant should be fully incorporated in the mill base prior to the introduction of any pigments. It promotes optimal pigment loading and controls dispersion rheology. This product is soluble in water, acetone, Arcosolv® DPM, Aromatic 100 Fluid, Butyl Cellusolv™, ethanol, mineral spirits, and propylene glycol. view less | |
| ADM 2100 | LEHVOSS Group | ADM 2100 is an amber fluid, APE/glycols and VOC free, low HLB surfactant primarily derived from renewable sources. It is used for pigment wetting and grinding as well as flow and leveling in solvent based paints and coatings. This product is soluble in am...view more ADM 2100 is an amber fluid, APE/glycols and VOC free, low HLB surfactant primarily derived from renewable sources. It is used for pigment wetting and grinding as well as flow and leveling in solvent based paints and coatings. This product is soluble in amyl acetate, Aromatic 100 Fluid, mineral spirits, petroleum oils, methyl ethyl ketone, vegetable oils, and xylene. It is insoluble in acetone, Arcosolv® DPM, and ethanol, and is dispersible in Butyl Cellosolv™. view less | |
| ADM 3100 | LEHVOSS Group | ADM 3100 is a clear fluid, bio-based amphoteric dispersant for use with inorganic pigments in aqueous systems. It offers excellent surface tension reduction in tint bases, as well as iron oxide colorant, TiO2, and ZnO dispersions. This product reduces gri...view more ADM 3100 is a clear fluid, bio-based amphoteric dispersant for use with inorganic pigments in aqueous systems. It offers excellent surface tension reduction in tint bases, as well as iron oxide colorant, TiO2, and ZnO dispersions. This product reduces grind times, secondary surfactant requirements, rub up, flooding, and floating. It also improves colorant acceptance into the base. It may be used alone or with a non-ionic surfactant, and must be fully dispersed into the mill base. view less | |
| ADM 3200 | LEHVOSS Group | ADM 3200 is an amber fluid, APE/VOC free, bio-based amphoteric dispersant for use in aqueous systems such as tint bases and carbon black, organic, and inorganic dispersions. It has 100% active content, 83% bio-based content, and is suitable for use in uni...view more ADM 3200 is an amber fluid, APE/VOC free, bio-based amphoteric dispersant for use in aqueous systems such as tint bases and carbon black, organic, and inorganic dispersions. It has 100% active content, 83% bio-based content, and is suitable for use in universal colorant formulations. This product improves color development, enhances formulation stability, and reduces pigment grind times, colorant flooding, floating, and rub up. It may be used with a non-ionic surfactant and must be fully dispersed into the mill base. view less | |
| ADM 500 | LEHVOSS Group | ADM 500 is an amber fluid, low HLB amphoteric surfactant that is 100% derived from renewable sources and is APE/glycols and VOC-free. This product is used for drilling muds, fuel additives, agricultural sprays, as well as pigment wetting and grinding. Thi...view more ADM 500 is an amber fluid, low HLB amphoteric surfactant that is 100% derived from renewable sources and is APE/glycols and VOC-free. This product is used for drilling muds, fuel additives, agricultural sprays, as well as pigment wetting and grinding. This product is dispersible in Butyl Cellosolve™ and Propylene Glycol. It is soluble in Aromatic 100 Fluid, Biodiesel, and Mineral Spirits and is insoluble in water, acetone, and ethanol. view less | |
| ADM 6200 | LEHVOSS Group | ADM 6200 is an amber fluid, bio-based amphoteric dispersant with anionic pigment affinic groups. It is designed for aqueous applications such as pigment dispersions and tint bases. It has 93% bio-based and 100% active content. It is APE and VOC free and h...view more ADM 6200 is an amber fluid, bio-based amphoteric dispersant with anionic pigment affinic groups. It is designed for aqueous applications such as pigment dispersions and tint bases. It has 93% bio-based and 100% active content. It is APE and VOC free and has excellent surface tension. This product helps reduce or eliminate the use of other surfactants as well as reduces settling, rub up, flooding, and floating. It improves colorant acceptance into the base and is suitable for use in universal colorant formulations. view less | |
| AEPD® | LEHVOSS Group | AEPD® is an efficient pigment dispersant which provides excellent properties in slurries used for coatings. When this product is used as the primary dispersant, it achieves improved rheology, pH stability, low odor, and increased color acceptance with uni...view more AEPD® is an efficient pigment dispersant which provides excellent properties in slurries used for coatings. When this product is used as the primary dispersant, it achieves improved rheology, pH stability, low odor, and increased color acceptance with universal colorants. It has intermediate base strength and provides a good balance of pH development and reserve alkalinity properties. Under ambient conditions, it will readily react with formaldehyde that finds application or controlling excess formaldehyde released from numerous products. Associated odor and irritation can be minimized. view less | |
| AEPD™ VOX 1000 | LEHVOSS Group | AEPD™ VOX 1000 is a new multifunctional additive for low odor, zero VOC interior water-based paints. It's very mild odor, high boiling point, and low vapor pressure make it the ideal formulating tool. The addition of this product to the grind will help al...view more AEPD™ VOX 1000 is a new multifunctional additive for low odor, zero VOC interior water-based paints. It's very mild odor, high boiling point, and low vapor pressure make it the ideal formulating tool. The addition of this product to the grind will help allow improved pigment dispersion resulting in lower primary dispersant levels and adjust and control pH. It will not contribute to the VOC of the paint and will virtually eliminate amine or ammonia type odors. view less | |
| ALKATERGE® E | LEHVOSS Group | ALKATERGE® E is highly soluble in most organic liquids, but is only very slightly soluble in water. Even so, a concentration of 0.001% by weight of this product in water will reduce the surface tension to about 40 mN/m. Although it does not lower the surf...view more ALKATERGE® E is highly soluble in most organic liquids, but is only very slightly soluble in water. Even so, a concentration of 0.001% by weight of this product in water will reduce the surface tension to about 40 mN/m. Although it does not lower the surface tension of mineral oil, the presence of 0.1% materially reduces the interfacial tension against water. ALKATERGE® E is used for paper, textiles, metal cleaners, salts, and soaps. It is also used as an emulsion stabilizer and an acid acceptor. view less | |
| ALKATERGE® T | LEHVOSS Group | ALKATERGE® T is one of a series of oxazoline-type nonvolatile surface active agents. At ordinary room temperature, it is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones. It is moderately soluble in aliphatic hyd...view more ALKATERGE® T is one of a series of oxazoline-type nonvolatile surface active agents. At ordinary room temperature, it is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones. It is moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, it is miscible with almost all organic liquids. ALKATERGE® T has been utilized as a corrosion inhibitor, an emulsifier, and as a dispersant in a variety of applications. When properly incorporated into a formulation, it can often perform all these functions simultaneously as well as other specific to particular systems. view less | |
| AMINE™ CS-1235 | LEHVOSS Group | AMINE™ CS-1235 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both a...view more AMINE™ CS-1235 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both an aldehyde and as an amine.They can be utilized as alkalinity modifiers, corrosion inhibitors, or emulsifiers in formulated products. These compounds can additionally be employed as curing agents or reactive diluents in the production of either acid or alkaline catalyzed polymers. view less | |
| AMINE™ CS-1246 | LEHVOSS Group | AMINE™ CS-1246 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both a...view more AMINE™ CS-1246 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both an aldehyde and as an amine.They can be utilized as alkalinity modifiers, corrosion inhibitors, or emulsifiers in formulated products. These compounds can additionally be employed as curing agents or reactive diluents in the production of either acid or alkaline catalyzed polymers. view less | |
| AMP™ | LEHVOSS Group | AMP™ Dispersant is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. This mobile liquid with a relatively low viscosity remains liquid at temperature as low as 4°C/39ºF to permit easy, convenient handling. It acts as a formaldeh...view more AMP™ Dispersant is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. This mobile liquid with a relatively low viscosity remains liquid at temperature as low as 4°C/39ºF to permit easy, convenient handling. It acts as a formaldehyde scavenger and co-dispersant for particulate systems. It is also an efficient amine for resin neutralization based on its high base strength and its relatively low odor and low molecular weight. view less | |
| AMP™ 75 | LEHVOSS Group | AMP™ 75 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -48°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight t...view more AMP™ 75 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -48°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to be an efficient amine for neutralization. It is also used as a corrosion inhibitor for steam-condensate lines, a component of a powerful anionic emulsifier systems, and acts as a formaldehyde scavenger and a co-dispersant for particulate systems. view less | |
| AMP™ 90 | LEHVOSS Group | AMP™ 90 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -37°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight t...view more AMP™ 90 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -37°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to be an efficient amine for neutralization. It is also used as a corrosion inhibitor for steam-condensate lines, a component of a powerful anionic emulsifier systems, and acts as a formaldehyde scavenger and a co-dispersant for particulate systems. view less | |
| AMP™ 95 | LEHVOSS Group | AMP™ 95 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as 4°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to ...view more AMP™ 95 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as 4°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to be an efficient amine for neutralization. It is also used as a corrosion inhibitor for steam-condensate lines, a component of a powerful anionic emulsifier systems, and acts as a formaldehyde scavenger and a co-dispersant for particulate systems. view less | |
| AMPD™ | LEHVOSS Group | AMPD™ is a primary alkanolamine that is white, crystalline solid and has a slight amine odor. Its alkalinity and molecular weight are virtually the same as those of diethanolamine. It is one of the series of nitroparaffin-derived primary alka-nolamines av...view more AMPD™ is a primary alkanolamine that is white, crystalline solid and has a slight amine odor. Its alkalinity and molecular weight are virtually the same as those of diethanolamine. It is one of the series of nitroparaffin-derived primary alka-nolamines available from ANGUS worldwide. AMPD™ is used as an efficient primary-amine neutralizing agent for acid-functional raw materials used in cosmetic and personal care products. view less | |
| ARGICAL-M 1000 | LEHVOSS Group | ARGICAL-M 1000 is an artificial pozzolana (metakaolin). It is obtained by micronising and calcining a kaolinitic clay from the Charentes basin. It is a dehydroxylated aluminum silicate. It is an amorphous, non-crystallised material, constituted of lamella...view more ARGICAL-M 1000 is an artificial pozzolana (metakaolin). It is obtained by micronising and calcining a kaolinitic clay from the Charentes basin. It is a dehydroxylated aluminum silicate. It is an amorphous, non-crystallised material, constituted of lamellar particles. This product is used as an additive for concretes, mortars, and coatings, made from Portland cement or lime. view less | |
| ARGICAL-M 1200S | LEHVOSS Group | ARGICAL-M 1200S is an artificial pozzolana (metakaolin). It is obtained by micronising and calcining a kaolinitic clay from the Charentes basin. It is a dehydroxylated aluminum silicate. It is an amorphous non-crystallized material, constituted of lamella...view more ARGICAL-M 1200S is an artificial pozzolana (metakaolin). It is obtained by micronising and calcining a kaolinitic clay from the Charentes basin. It is a dehydroxylated aluminum silicate. It is an amorphous non-crystallized material, constituted of lamellar particles. It is used as an additive for concretes, mortars, and coatings, made from Portland cement or lime. view less | |
| ARGICAL-M 50S | LEHVOSS Group | ARGICAL-M 50S is an artificial pozzolana (metakaolin) in slurry. It is obtained by calcination and grinding of a kaolinitic clay from the Charentes basin. This product is a dehydroxylated aluminium silicate. It is an amorphous non-crystallized material, w...view more ARGICAL-M 50S is an artificial pozzolana (metakaolin) in slurry. It is obtained by calcination and grinding of a kaolinitic clay from the Charentes basin. This product is a dehydroxylated aluminium silicate. It is an amorphous non-crystallized material, whose particles are lamellar. ARGICAL-M 50S is used as an additive for concretes, mortars, and Portland cement or lime-based coatings. view less | |
| ARGIREC B22 | LEHVOSS Group | ARGIREC B22 is a sedimentary kaolinite from the Charentes basin. This product is supplied in dry powder form and is delivered in bulk and sacks. | |
| BARRISURF™ HX | LEHVOSS Group | BARRISURF™ HX is one of the new barrier kaolins as part of the BARRISURF™ product line. This hyper-platey, nano-dimensional thickness crystals creates a tortuous coating structure that inherently resists penetration. With the rising cost of polymers, inco...view more BARRISURF™ HX is one of the new barrier kaolins as part of the BARRISURF™ product line. This hyper-platey, nano-dimensional thickness crystals creates a tortuous coating structure that inherently resists penetration. With the rising cost of polymers, incorporating kaolins in a formulation is a cost effective route to deliver superior barrier performance against water, gases, and grease. view less | |
| BARRISURF™ LX | LEHVOSS Group | BARRISURF™ LX is one of the new barrier kaolins as part of the BARRISURF™ product line. This hyper-platey, nano-dimensional thickness crystals creates a tortuous coating structure that inherently resists penetration. With the rising cost of polymers, inco...view more BARRISURF™ LX is one of the new barrier kaolins as part of the BARRISURF™ product line. This hyper-platey, nano-dimensional thickness crystals creates a tortuous coating structure that inherently resists penetration. With the rising cost of polymers, incorporating kaolins in a formulation is a cost effective route to deliver superior barrier performance against water, gases, and grease. view less | |
| Benzophenone | LEHVOSS Group | Benzophenone are off-white flakes designed for UV light photopolymerisation of systems based on acrylic oligomers and monomers. The radical generation occurs via Hydrogen abstraction by the action of a co-initiator such as tertiary amines. This product is...view more Benzophenone are off-white flakes designed for UV light photopolymerisation of systems based on acrylic oligomers and monomers. The radical generation occurs via Hydrogen abstraction by the action of a co-initiator such as tertiary amines. This product is insoluble in water, and soluble in most common organic solvents, monomers, and oligomers for UV applications. The main suggested applications are in the manufacturing of OPV, coatings for flooring, printing inks, adhesives, and clear lacquers for wood, plastic, paper, metal, optical fibers. view less | |
| BR-101 | LEHVOSS Group | Dianal BR-101 is a thermoplastic acrylic resin for use in applications of topcoats for vacuum metallized plastics. BR-101 is supplied in solid bead form and is soluble in aliphatic and alcohol solvents. | |
| BR-105 | LEHVOSS Group | Dianal BR-105 is a thermoplastic acrylic resin designed for use in weak solvents. BR-105 has a lower molecular weight than BR-101 and also shows lower viscosity. | |
| BR-106 | LEHVOSS Group | Dianal BR-106 is the workhorse resin of the BR series. It is an excellent general purpose resin with very fast solvent release. BR-106 is a n-butyl methacrylate copolymer and is supplied in the form of small, uniform beads which readily dissolve in a wide...view more Dianal BR-106 is the workhorse resin of the BR series. It is an excellent general purpose resin with very fast solvent release. BR-106 is a n-butyl methacrylate copolymer and is supplied in the form of small, uniform beads which readily dissolve in a wide range of solvents. In fact, this solid bead resin will actually cut into solvent faster than many solution acrylics at 50% total solids. BR-106 is compatible with modified polyester resins, providing an air-dry system with excellent durability, toughness, adhesion, and resistance properties. view less | |
| BR-107 | LEHVOSS Group | Dianal BR-107 is a thermoplastic acrylic resin designed for use in heat seal adhesives and coatings. BR-107 is compatible with BR-53, styrene rich acrylic resin, which can improve UV light resistance. | |
| BR-113 | LEHVOSS Group | Dianal BR-113 is a thermoplastic acrylic resin specifically designed for inks and paints. BR-113 is a harder version of BR-106 and shows better chemical resistance to alcohol solvents including gasoline. | |
| BR-115 | LEHVOSS Group | BR-115 is a thermoplastic acrylic resin and is particularly designed for compatibility with medium- and long-oil alkyd resins. When BR-115 is used to modify these alkyd resins, coatings with faster drying speed and better retention of color and gloss resu...view more BR-115 is a thermoplastic acrylic resin and is particularly designed for compatibility with medium- and long-oil alkyd resins. When BR-115 is used to modify these alkyd resins, coatings with faster drying speed and better retention of color and gloss result. BR-115 is soluble in toluene, xylene, mineral spirits, etc. BR-115 can be used as solution in mineral spirits to the above purpose. view less | |
| BR-116 | LEHVOSS Group | Dianal BR-116 is a thermoplastic acrylic resin specifically designed for inks and paints. BR-116 is a higher acid value version of BR-106 for better pigment dispersibility. | |
| BR-117 | LEHVOSS Group | Dianal BR-117 is thermoplastic acrylic resin specially designed for use in heat seal adhesives and inks. They come in the form of white, non-dusting beads. | |
| BR-121DA | LEHVOSS Group | Dianal BR-121DA acrylic resin is specifically designed to provide excellent adhesion in paints and inks on metal substrates. BR-121DA also provides excellent pigment dispersibility and weatherability. | |
| BR-201 | LEHVOSS Group | Dianal BR-201 is a thermoplastic acrylic resin designed for medium- and long-oil alkyd modifier. BR-201 is broadly compatible with many medium- and long-oil alkyds and soluble in many organic solvents such as aromatics, esters, and ketones. | |
| BR-220 | LEHVOSS Group | Dianal BR-220 offers a good combination of properties for use in flexographic inks and as a clear coating over bright metals such as silver, copper, and brass. Where some sacrifice in light resistance and gloss retention can be tolerated, BR-220 may be co...view more Dianal BR-220 offers a good combination of properties for use in flexographic inks and as a clear coating over bright metals such as silver, copper, and brass. Where some sacrifice in light resistance and gloss retention can be tolerated, BR-220 may be combined with nitrocellulose to reduce cost and promote fast solvent release for quick drying. view less | |
| BR-53 | LEHVOSS Group | Dianal BR-53 is a thermoplastic acrylic resin designed for use in wet concrete coatings. This product shows good water release performance, flexibility, and pigment dispersibility. BR-53 is primarily used as a concrete curing compound. | |
| BR-55 | LEHVOSS Group | Dianal BR-55 is a thermoplastic acrylic resin designed for use in wet concrete coatings. BR-55 has a higher molecular weight than BR-53 and also shows higher viscosity. | |
| BR-57 | LEHVOSS Group | Dianal BR-57 is a styrene/acrylic copolymer designed for the concrete marketplace with similar properties to BR-53. One major difference is in the molecular weight, with BR-57 being lower than BR-53. | |
| BR-73 | LEHVOSS Group | Dianal BR-73 is a thermoplastic acrylic resin designed for use in applications of PVC coatings or PVC leather processing. This product shows good performance in plasticizer barrier properties. BR-73 is useful in wallpaper coatings and automotive refinish ...view more Dianal BR-73 is a thermoplastic acrylic resin designed for use in applications of PVC coatings or PVC leather processing. This product shows good performance in plasticizer barrier properties. BR-73 is useful in wallpaper coatings and automotive refinish coatings. view less | |
| BR-78 | LEHVOSS Group | Dianal BR-78 is a thermoplastic acrylic resin designed for use as a low profile additive for SMC. BR-78 has balanced properties for and is the core product of this field. | |
| BR-80 | LEHVOSS Group | Dianal BR-80 is a thermoplastic acrylic resin designed for use in PVC coatings or overprint varnishes. BR-80 is a lower acid grade of BR-73. This lower solid acid value improves water and weather resistance. | |
| BR-85 | LEHVOSS Group | Dianal BR-85 is a thermoplastic acrylic resin designed for use in PVC coatings. BR-85 shows outstanding hardness, toughness, and chemical resistance. | |
| BR-87 | LEHVOSS Group | Dianal BR-87 is a thermoplastic acrylic resin designed for use in inks. BR-87 is a very hard resin with good pigment dispersibility. BR-87 can be used as a modifier resin to improve hardness. | |
| BR-88 | LEHVOSS Group | BR-88 is the hardest of our BR grades and has the highest molecular weight. It is tough and has excellent durability. | |
| BR-90 | LEHVOSS Group | Dianal BR-90 is a thermoplastic acrylic resin designed for use in inks and coatings. BR-90 shows wide compatibility to various types of resins and can be used as a modifier. | |
| Capstone® FS-10 | LEHVOSS Group | Capstone® FS-10 is a clear to yellow liquid anionic fluorinated surfactant that reduces the surface tension of aqueous solutions to very low levels. It demonstrates exceptional chemical stability in corrosive media and, in particular, very acidic solution...view more Capstone® FS-10 is a clear to yellow liquid anionic fluorinated surfactant that reduces the surface tension of aqueous solutions to very low levels. It demonstrates exceptional chemical stability in corrosive media and, in particular, very acidic solutions. It also is a low-foaming agent that imparts additional properties that may prove useful in formulations based on aggressive (highly acidic, oxidizing, or reducing) media. view less | |
| Capstone® FS-22 | LEHVOSS Group | Capstone® FS-22 is a solvent-borne additive that provides low surface tension in solvent-based and high solids systems. It is compatible with most solvent-based systems. The low surface tension enables better wetting, spreading, and leveling. When cured i...view more Capstone® FS-22 is a solvent-borne additive that provides low surface tension in solvent-based and high solids systems. It is compatible with most solvent-based systems. The low surface tension enables better wetting, spreading, and leveling. When cured into a coating, this product provides surface water and oil repellency and chemical resistance to the film. Used in a cleaning system, FS-22 boosts stain resistance through surface energy modification, and it provides foaming properties in non-polar systems. At very low use rates, it delivers advanced wetting and leveling power. view less | |
| Capstone® FS-30 | LEHVOSS Group | Capstone® FS-30 is a general-purpose, water-soluble, ethoxylated nonionic fluorosurfactant that modifies surface energies at very low concentrations. This product is VOC-free, APEO-free, nonflammable and is compatible with additives and resins of any ioni...view more Capstone® FS-30 is a general-purpose, water-soluble, ethoxylated nonionic fluorosurfactant that modifies surface energies at very low concentrations. This product is VOC-free, APEO-free, nonflammable and is compatible with additives and resins of any ionic class. FS-30 is stable in acidic, basic, brine, and hard water environments. Due to its good stability across a bro-ad pH range, it is an ideal wetting and leveling agent for many aqueous applications. It is effective as a plating bath aid by reducing drag-out from bath applications. Additionally, it can be used in coatings to reduce surface defects and to lower surface tension in many types of cleaning formulations. view less | |
| Capstone® FS-31 | LEHVOSS Group | Capstone® FS-31 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable an...view more Capstone® FS-31 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable and is compatible with additives and resins of any ionic class. Even at very low concentrations, FS-31 can deliver tremendous wetting power. It is stable in acidic, basic, brine, and hard water environments, making it easy to formulate into a variety of systems. It is effective as an additive in cleaning products, paints, coatings, adhesives, and films. view less | |
| Capstone® FS-3100 | LEHVOSS Group | Capstone® FS-3100 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable,...view more Capstone® FS-3100 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable, and is compatible with additives and resins of any ionic class. Even at very low concentrations, it can deliver tremendous wetting power. This product is stable in acidic, basic, brine, and hard water environments, making it easy to formulate into a variety of systems. view less | |
| Capstone® FS-34 | LEHVOSS Group | Capstone® FS-34 is a general-purpose, water-soluble, ethoxylated nonionic fluorosurfactant that modifies surface energies at very low concentrations. It is VOC-free, APEO-free, non-flammable and is compatible with additives and resins of any ionic class. ...view more Capstone® FS-34 is a general-purpose, water-soluble, ethoxylated nonionic fluorosurfactant that modifies surface energies at very low concentrations. It is VOC-free, APEO-free, non-flammable and is compatible with additives and resins of any ionic class. This product is stable in acidic, basic, brine, and hard water environments. Due to its good stability across a broad pH range, FS-34 is an ideal wetting and leveling agent for many aqueous applications. It is also effective as a plating bath aid by reducing drag-out from bath applications. Additionally, it can be used in coatings to reduce surface defects and to lower surface tension in many types of cleaning formulations. view less | |
| Capstone® FS-35 | LEHVOSS Group | Capstone® FS-35 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, as well as enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-f...view more Capstone® FS-35 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, as well as enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable, and is compatible with additives and resins of any ionic class. Even at very low concentrations, FS-35 can deliver tremendous wetting power. It is stable in acidic, basic, brine, and hard water environments making it easy to formulate into a variety of systems. It is also effective as an additive in cleaning products, paints, coatings, adhesives, and films. view less | |
| Capstone® FS-50 | LEHVOSS Group | Capstone® FS-50 is an amphoteric fluorosurfactant that significantly reduces the surface tension of aqueous solutions and is also useful in providing sustained foam. It enables the formation of a thin low surface tension aqueous film, which is useful for ...view more Capstone® FS-50 is an amphoteric fluorosurfactant that significantly reduces the surface tension of aqueous solutions and is also useful in providing sustained foam. It enables the formation of a thin low surface tension aqueous film, which is useful for creating surface defect-free films over low surface tension or contaminated substrates. FS-50 is recommended as a surface tension reducing and foaming agent for use in oilfield operations, industrial and institutional cleaning, floor care applications, as well as latex paints and alkyd emulsions. view less | |
| Capstone® FS-51 | LEHVOSS Group | Capstone® FS-51 is an amphoteric amine oxide-based fluorosurfactant that significantly reduces the surface tension of aqueous solutions and is also useful in providing sustained foam. It enables the formation of a thin low surface tension aqueous film, wh...view more Capstone® FS-51 is an amphoteric amine oxide-based fluorosurfactant that significantly reduces the surface tension of aqueous solutions and is also useful in providing sustained foam. It enables the formation of a thin low surface tension aqueous film, which is useful for creating surface defect-free films over low surface tension or contaminated substrates. FS-51 is recommended as a surface tension reducing and foaming agent for use in oilfield operations, industrial and institutional cleaning, floor care applications, as well as latex paints and alkyd emulsions. view less | |
| Capstone® FS-60 | LEHVOSS Group | Capstone® FS-60 is a water-soluble, anionic fluorosurfactant that gives low aqueous surface tensions with minimal foaming. It offers excellent wetting, leveling, anti-block, and anti-catering performance. This fluorosurfactant is specifically formulated f...view more Capstone® FS-60 is a water-soluble, anionic fluorosurfactant that gives low aqueous surface tensions with minimal foaming. It offers excellent wetting, leveling, anti-block, and anti-catering performance. This fluorosurfactant is specifically formulated for leveling of floor finishes. It is also effective at reducing the surface tension of concentrated cleaning solutions. view less | |
| Capstone® FS-61 | LEHVOSS Group | Capstone® FS-61 is a VOC-free and APEO-free, water-based dispersion, anionic fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It offers excellent wetting, leveling, anti-block, and flow control. This environ...view more Capstone® FS-61 is a VOC-free and APEO-free, water-based dispersion, anionic fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It offers excellent wetting, leveling, anti-block, and flow control. This environmentally friendly alternative fluorosurfactant can be used in a variety of applications including architectural coatings, industrial finishes, floor care formulations, wood coatings, specialty cleaners, and metal cleaning. view less | |
| Capstone® FS-63 | LEHVOSS Group | Capstone® FS-63 is a water-soluble, anionic fluorosurfactant that gives low aqueous surface tensions with minimal foaming. It offers excellent wetting, leveling, anti-block, and dirt pick-up resistance, This fluorosurfactant can be used in a variety of ap...view more Capstone® FS-63 is a water-soluble, anionic fluorosurfactant that gives low aqueous surface tensions with minimal foaming. It offers excellent wetting, leveling, anti-block, and dirt pick-up resistance, This fluorosurfactant can be used in a variety of applications including architectural coatings, industrial finishes, floor care formulations, wood coatings, specialty cleaners, and metal cleaning. view less | |
| Capstone® FS-64 | LEHVOSS Group | Capstone® FS-64 is a VOC-free, water-soluble, anionic, proprietary fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It combines the unique properties of fluorine with the strength of a DuPont™ Renewably Sour...view more Capstone® FS-64 is a VOC-free, water-soluble, anionic, proprietary fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It combines the unique properties of fluorine with the strength of a DuPont™ Renewably Sourced™ material. This environmentally preferred fluorosurfactant can be used in a variety of applications including architectural coatings, industrial finishes, floor care formulations, and cleaning solutions. view less | |
| Capstone® FS-65 | LEHVOSS Group | Capstone® FS-65 is a VOC-free, water-soluble fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It has a strong nonionic character under all conditions. It provides good stability, surface tension reduction an...view more Capstone® FS-65 is a VOC-free, water-soluble fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It has a strong nonionic character under all conditions. It provides good stability, surface tension reduction and sustainable foaming in brine media. In addition, it provides good stability, surface tension reduction, and low foaming in aggressive media (acidic and basic). This environmentally preferred fluorosurfactant can be used in a variety of applications including architectural coatings, industrial finishes, floor care formulations, etching applications, and cleaning solutions. view less | |
| Capstone® FS-66 | LEHVOSS Group | Capstone® FS-66 is an anionic fluorosurfactant that contains no solvents. The absence of solvents makes this product a very effective surface modifying additive in solvent-based and neat coating system. It improves wetting, leveling, and anti-soiling for ...view more Capstone® FS-66 is an anionic fluorosurfactant that contains no solvents. The absence of solvents makes this product a very effective surface modifying additive in solvent-based and neat coating system. It improves wetting, leveling, and anti-soiling for solvent-based points, and anti-smearing agent for inks in paint and coatings applications. It also is used in internal and external mold releases for resin, plastic, and metal molding, view less | |
| Capstone® FS-81 | LEHVOSS Group | Capstone® FS-81 is a fluorinated polymeric coating additive. It is a water dispersion that can improve cleanability of oily dirt and provide oil repellency to flat architectural paints and waterborne coatings and does not affect water repellency. The appl...view more Capstone® FS-81 is a fluorinated polymeric coating additive. It is a water dispersion that can improve cleanability of oily dirt and provide oil repellency to flat architectural paints and waterborne coatings and does not affect water repellency. The applications improves oil repellency and washability of oil based stains for low sheen interior latex wall paints. It provides good dirt pickup resistance for exterior latex paints and can be used as a wetting agent in water based and polar solvent based coatings and printing inks. view less | |
| Capstone® FS-82 | LEHVOSS Group | Capstone® FS-82 is a clear to hazy amber liquid, aqueous dispersion of a cationic fluorinated copolymer. It provides oil and water repellency, stain resistance, and easy stain cleanup. This product is used for water-based waxes and polishes for automobile...view more Capstone® FS-82 is a clear to hazy amber liquid, aqueous dispersion of a cationic fluorinated copolymer. It provides oil and water repellency, stain resistance, and easy stain cleanup. This product is used for water-based waxes and polishes for automobiles and for wood stain impregnation. view less | |
| Capstone® FS-83 | LEHVOSS Group | Capstone® FS-83 is a solvent-borne additive that provides low surface tension in solvent-based paints. It is compatible with most organic solvent-based systems. The low surface tension enables better wetting, spreading, leveling to correct solvent-borne c...view more Capstone® FS-83 is a solvent-borne additive that provides low surface tension in solvent-based paints. It is compatible with most organic solvent-based systems. The low surface tension enables better wetting, spreading, leveling to correct solvent-borne coating defects, such as fisheyes, craters, pinholes, and orange peel. When cured into a coating, it provides water and oil repellency, as well as chemical resistance, to the film. view less | |
| Capstone® LPA | LEHVOSS Group | Capstone® LPA is a solvent-based, partially fluorinated polymer used for the protection of leathers and textiles. It is typically used for spray finishing of leathers and for formulating aerosols. It is based on six fluorinated carbon molecules that canno...view more Capstone® LPA is a solvent-based, partially fluorinated polymer used for the protection of leathers and textiles. It is typically used for spray finishing of leathers and for formulating aerosols. It is based on six fluorinated carbon molecules that cannot break down to PFOA in the environment. Capstone® LPA has excellent water and oil repellency. It has excellent resistance to oil- and water-based stains. view less | |
| Capstone® LPW | LEHVOSS Group | Capstone® LPW is an exceptional product for the protection of leather and suede. It was developed using novel patented next generation technology that delivers superior performance and aesthetics while meeting your sustainability objectives. This product ...view more Capstone® LPW is an exceptional product for the protection of leather and suede. It was developed using novel patented next generation technology that delivers superior performance and aesthetics while meeting your sustainability objectives. This product can be applied either in a drum or as a spray finish to provide a durable and invisible barrier to water, oil, dirt, and stains. The treated leather's aesthetic properties are not affected by the application because Capstone® LPW does not form a polymer film coating, leather remains breathable and luxurious. view less | |
| Capstone® ST-100HS | LEHVOSS Group | Capstone® ST-100HS is an aqueous fluorochemical dispersion that provides a durable, subsurface, transparent protective barrier against oil and water on porous mineral surfaces. It is used in water-based penetrating sealers for stone, unglazed tile, grout,...view more Capstone® ST-100HS is an aqueous fluorochemical dispersion that provides a durable, subsurface, transparent protective barrier against oil and water on porous mineral surfaces. It is used in water-based penetrating sealers for stone, unglazed tile, grout, terra cotta, and other porous mineral surfaces such as concrete, brick, stone, and tile. This product provides oil and water repellency, stain resistance, and easy stain cleanup. view less | |
| Capstone® ST-110 | LEHVOSS Group | Capstone® ST-110 is an aqueous fluorochemical dispersion that provides a durable, subsurface, transparent protective barrier against oil and water on porous and polished mineral surfaces such as stone and tile. The product is used in water-based penetrati...view more Capstone® ST-110 is an aqueous fluorochemical dispersion that provides a durable, subsurface, transparent protective barrier against oil and water on porous and polished mineral surfaces such as stone and tile. The product is used in water-based penetrating sealers for natural stone, unglazed tile, grout, terra cotta, and other porous mineral surfaces such as concrete and brick. Capstone® ST-110 provides oil and water repellency, stain resistance, and easy stain cleanup. view less | |
| Capstone® ST-200 | LEHVOSS Group | Capstone® ST-200 is a solvent-based acrylic fluorinated co-polymer that provides a durable, subsurface, transparent, protective barrier against oil and water on porous surfaces such as stone, tile, and grout. It is used in solvent-based penetrating sealer...view more Capstone® ST-200 is a solvent-based acrylic fluorinated co-polymer that provides a durable, subsurface, transparent, protective barrier against oil and water on porous surfaces such as stone, tile, and grout. It is used in solvent-based penetrating sealers, especially for low-porosity stone, unglazed tile, grout, terra cotta, and other porous surfaces such as concrete and brick. Capstone® ST-200 provides oil and water repellency, stain resistance, and easy stain cleanup. view less | |
| Capstone® ST-300 | LEHVOSS Group | Capstone® ST-300 is a yellow to amber colored aqueous fluorochemical solution that can be used in water-based penetrating sealers to provide a durable, non-film-forming, transparent, protective barrier against oil and water on porous surfaces such as ston...view more Capstone® ST-300 is a yellow to amber colored aqueous fluorochemical solution that can be used in water-based penetrating sealers to provide a durable, non-film-forming, transparent, protective barrier against oil and water on porous surfaces such as stone, unglazed tile, grout, terra cotta, concrete, and brick. This product provides excellent oil and water repellency, stain resistance, and easy stain cleanup. view less | |
| Capstone® ST-500 | LEHVOSS Group | Capstone® ST-500 is a yellow to amber colored aqueous fluorochemical solution that can be used in water-based penetrating sealers to provide a durable, non-film-forming, transparent, protective barrier against oil and water on porous surfaces such as ston...view more Capstone® ST-500 is a yellow to amber colored aqueous fluorochemical solution that can be used in water-based penetrating sealers to provide a durable, non-film-forming, transparent, protective barrier against oil and water on porous surfaces such as stone, unglazed tile, grout, terra cotta, concrete, and brick. This product provides excellent oil and water repellency, stain resistance, and ease of cleaning. view less | |
| CHAINGUARD® I-15 | LEHVOSS Group | CHAINGUARD® I-15 is a highly efficient scavenger of free radicals and is widely used to terminate (shortstop) the free-radical emulsion polymerizations of styrene-butadiene and acrylonitrile-butadiene in the production of SBR and NBR elastomers, respectiv...view more CHAINGUARD® I-15 is a highly efficient scavenger of free radicals and is widely used to terminate (shortstop) the free-radical emulsion polymerizations of styrene-butadiene and acrylonitrile-butadiene in the production of SBR and NBR elastomers, respectively. This product is also expected to be effective in stopping other polymerizations that proceed via a free radical mechanism, such as emulsion polymerizations of chloroprene and fluorinated olefins. view less | |
| CORRGUARD™ LSA | LEHVOSS Group | CORRGUARD™ LSA is a new product developed by ANGUS in response to a market request for a product containing a maximum of 1% secondary amine. It contains less than 0.75% of secondary amines by product specification and is made from an enhanced production p...view more CORRGUARD™ LSA is a new product developed by ANGUS in response to a market request for a product containing a maximum of 1% secondary amine. It contains less than 0.75% of secondary amines by product specification and is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. view less | |
| CORRGUARD™ LSA 6000 | LEHVOSS Group | CORRGUARD™ LSA 6000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH dev...view more CORRGUARD™ LSA 6000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH development and neutralization of acidic components as well as improved resistance to microbial degradation. It also offers enhanced performance of triazine biocides and minimal ammonia release, leaching of cobalt, and foam generation. view less | |
| CORRGUARD™ LSA 7000 | LEHVOSS Group | CORRGUARD™ LSA 7000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH dev...view more CORRGUARD™ LSA 7000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH development and neutralization of acidic components as well as improved resistance to microbial degradation. It also offers enhanced performance of triazine biocides and minimal ammonia release, leaching of cobalt, and foam generation. view less | |
| CORRGUARD™ LSA 8000 | LEHVOSS Group | CORRGUARD™ LSA 8000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH dev...view more CORRGUARD™ LSA 8000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH development and neutralization of acidic components as well as improved resistance to microbial degradation. It also offers enhanced performance of triazine biocides and minimal ammonia release, leaching of cobalt, and foam generation. view less | |
| CORRGUARD™ SI | LEHVOSS Group | CORRGUARD™ SI is a yellow to brown, clear to hazy, organic, anionic liquid. It is the response to the need for improved aluminum and galvanized steel staining control. This product inhibits staining on common aluminum alloys including cast Al 380, as well...view more CORRGUARD™ SI is a yellow to brown, clear to hazy, organic, anionic liquid. It is the response to the need for improved aluminum and galvanized steel staining control. This product inhibits staining on common aluminum alloys including cast Al 380, as well as galvanized steel. This unique building block is free of silicates and phosphorus, and is suitable for long-life bio-resistant formulations. CORRGUARD™ SI also provides emulsification and lubricity properties. This multi-functionality may allow other formulation ingredients to be reduced, allowing fluid cost and performance to be optimized. view less | |
| Devolite™ | LEHVOSS Group | Devolite™ is a specially predispensed china clay. It has an alkaline pH and as the term predispersed implies will disperse readily in aqueous media without the need for defiocculant addition. | |
| DM® 120 | LEHVOSS Group | DM® 120 is a 100% nonvolatile, epoxy acrylate resin. It provides solvent resistance, high gloss, improved flexibility and good adhesion. It is a clear liquid with characteristics of light color and low shrinkage. DM® 120 can be used in overprinting varnis...view more DM® 120 is a 100% nonvolatile, epoxy acrylate resin. It provides solvent resistance, high gloss, improved flexibility and good adhesion. It is a clear liquid with characteristics of light color and low shrinkage. DM® 120 can be used in overprinting varnishes, coating for paper and plastics, lithographic and screen ink vehicles, as well as metal decorating vehicles. view less | |
| DM® 186 | LEHVOSS Group | DM® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment wetting, le...view more DM® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment wetting, leveling, and adhesion. DM® 186 is recommended for use in overprint varnishes, clear coatings for paper, wood top coats with smooth surface, ink binders with good wetting property, and adhesives. view less | |
| DM® 541 | LEHVOSS Group | DM® 541 is an aliphatic urethane acrylate oligomer, characterized by its good abrasion resistance and good adhesion. The excellent non-yellowing property is similar to a typical aliphatic urethane resin. It also has good elasticity and flexibility along w...view more DM® 541 is an aliphatic urethane acrylate oligomer, characterized by its good abrasion resistance and good adhesion. The excellent non-yellowing property is similar to a typical aliphatic urethane resin. It also has good elasticity and flexibility along with fast cure times and good weathering ability performance. This product is recommended for use in UV inks, UV cured adhesives, coatings for wood and plastics requiring exterior durability, as well as overprinting varnishes for paper and board. view less | |
| DM® 584 | LEHVOSS Group | DM® 584 is an aliphatic urethane acrylate oligomer diluted with 12% 1,6-hexanediol diacrylate (HDDA) monomer. Films cured of this product by ultraviolet light (UV) or electron beam (EB) systems impart excellent exterior durability, flexibility, toughness,...view more DM® 584 is an aliphatic urethane acrylate oligomer diluted with 12% 1,6-hexanediol diacrylate (HDDA) monomer. Films cured of this product by ultraviolet light (UV) or electron beam (EB) systems impart excellent exterior durability, flexibility, toughness, and the non-yellowing properties similar to a typical aliphatic urethane. DM® 584 is recommended for use in coatings for wood and plastic requiring exterior durability, pigment coatings for wood, metal coating, and clear coatings for cork. view less | |
| DM® 88A | LEHVOSS Group | DM® 88A is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of this product, exhibits excellent hardness, high gloss, and solvent resistance. This p...view more DM® 88A is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of this product, exhibits excellent hardness, high gloss, and solvent resistance. This product is recommended for use in wood coatings and fillers, lithographic inks, as well as improved cured speed, solvent resistance, and gloss. view less | |
| DMAMP™ 80 | LEHVOSS Group | DMAMP™ 80, in combination with an unsaturated fatty acid, is extremely effective in producing emulsions of waxes. It is recommended for evaluation as a vapor-phase corrosion inhibitor in steam condensate systems, but can also be used in water-based hydrau...view more DMAMP™ 80, in combination with an unsaturated fatty acid, is extremely effective in producing emulsions of waxes. It is recommended for evaluation as a vapor-phase corrosion inhibitor in steam condensate systems, but can also be used in water-based hydraulic fluids and in high-water content aerosol cans. This product is effective as a solubilizer for resin systems which contain free carboxylic acid groups and are designed to be dispersible in water. It is also effective as a catalyst for production of polyurethane foams. view less | |
| DOUBLEMER® 530 | LEHVOSS Group | DOUBLEMER® 530 is an aliphatic urethane diacrylate resin, characterized by its light color and low viscosity. Films cured by this product via exposure to ultraviolet light (UV) or electric beam (EB) are soft, flexible exhibiting the inherent non-yellow pr...view more DOUBLEMER® 530 is an aliphatic urethane diacrylate resin, characterized by its light color and low viscosity. Films cured by this product via exposure to ultraviolet light (UV) or electric beam (EB) are soft, flexible exhibiting the inherent non-yellow properties similar to a typical aliphatic urethane acrylate. It is most often used an additive to improve the flexibility of finished formulations. view less | |
| DOUBLEMER® 87A | LEHVOSS Group | DOUBLEMER® 87A is a hexafunctional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of this product exhibit excellent hardness and solvent resistance w...view more DOUBLEMER® 87A is a hexafunctional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of this product exhibit excellent hardness and solvent resistance without yellowing. It is characterized by its light color, as well as its excellent film toughness, film hardness, and fast cure response. view less | |
| ECCABOND N | LEHVOSS Group | ECCABOND N is a grey to fawn colored powder, sodium bentonite with high swelling, gelling, and bonding properties, designed for Foundry and general bonding and viscosifying purposes. | |
| EcoFlat™ 1880 | LEHVOSS Group | EcoFlat™ 1880 is an environmentally friendly natural matting agent for paints. It is a fine, white powder that comes from Planta Africa, Chile. | |
| ESACOTE CN 24 | LEHVOSS Group | ESACOTE CN 24 is an opalescent liquid, waterborne polyether based cationic aliphatic polyurethane dispersion, that forms a soft, elastic, and slightly sticky film. This product is solvent and formaldehyde free and therefore is characterized by a low envir...view more ESACOTE CN 24 is an opalescent liquid, waterborne polyether based cationic aliphatic polyurethane dispersion, that forms a soft, elastic, and slightly sticky film. This product is solvent and formaldehyde free and therefore is characterized by a low environmental impact. view less | |
| ESACOTE MD 15 | LEHVOSS Group | ESACOTE MD 15 is an opalescent liquid, waterborne cationic polyurethane dispersion, that forms an elastic film for the metal and the wood coatings. This product is solvent and formaldehyde free and therefore is characterized by a low environmental impact. | |
| ESACOTE MD 23 | LEHVOSS Group | ESACOTE MD 23 is a waterborne dispersion of a cationic modified polymer, which can be used for the stain and tannin blocking primers application. This product is solvent and formaldehyde free and therefore is characterized by a low environmental impact. | |
| ESACOTE PAD | LEHVOSS Group | ESACOTE PAD is a white liquid, aliphatic polyurethane waterborne dispersion based on polyether polyols, which is specifically designed for padding application for outwear, sportswear, and fashion where a full, elastic, and non sticky touch modification is...view more ESACOTE PAD is a white liquid, aliphatic polyurethane waterborne dispersion based on polyether polyols, which is specifically designed for padding application for outwear, sportswear, and fashion where a full, elastic, and non sticky touch modification is required. This product has excellent washing and dry cleaning fastness and can be also suitable for coating and printing applications. view less | |
| ESACOTE PU 13 | LEHVOSS Group | ESACOTE PU 13 is a milky white liquid, water-borne polyurethane acrylic copolymer, based on polyether and aliphatic isocyanates and solvent free. This product gives origin to film with good flexibility and hardness. It is suitable for interior wood coatin...view more ESACOTE PU 13 is a milky white liquid, water-borne polyurethane acrylic copolymer, based on polyether and aliphatic isocyanates and solvent free. This product gives origin to film with good flexibility and hardness. It is suitable for interior wood coatings, alone or in combination with acrylic dispersions. The chemical resistance can be improved by crosslinking with polyaziridine adduct like CATALYST AT5/N. view less | |
| ESACOTE PU 143 | LEHVOSS Group | ESACOTE PU 143 is a solvent free water-borne polyurethane acrylic copolymer, based on polyether and aliphatic isocyanates, which gives a film with a good flexibility and hardness. It is suitable for interior wood coatings, alone or in combination with acr...view more ESACOTE PU 143 is a solvent free water-borne polyurethane acrylic copolymer, based on polyether and aliphatic isocyanates, which gives a film with a good flexibility and hardness. It is suitable for interior wood coatings, alone or in combination with acrylic dispersions. The chemical resistance can be improved by crosslinking with an isocyanate like Crosslinker 08 or with polyaziridine adduct like CATALYST AT5/N. view less | |
| ESACOTE PU 147 | LEHVOSS Group | ESACOTE PU 147 is a waterborne polyurethane-acrylic copolymer dispersion based on aliphatic isocyanates and polyether diols, surfactants free. It is able to form transparent and tough films, with high gloss level and chemical resistance. It shows good adh...view more ESACOTE PU 147 is a waterborne polyurethane-acrylic copolymer dispersion based on aliphatic isocyanates and polyether diols, surfactants free. It is able to form transparent and tough films, with high gloss level and chemical resistance. It shows good adhesion on wood, polyester primers, glass and metal; however, it is not suitable for products/applications requiring direct adhesion on plastics. ESACOTE PU 147 is then particularly suitable for wood coating, wood flooring, and metal coating, where excellent chemical resistance, adhesion, and transparency are required. view less | |
| ESACOTE PU 150 | LEHVOSS Group | ESACOTE PU 150 is a water based polyurethane-acrylic copolymer based on aromatic/aliphatic isocyanates. It has a good balance of adhesion, hardness, flexibility and water resistance. In combination with acrylic dispersions, this product improves sandabili...view more ESACOTE PU 150 is a water based polyurethane-acrylic copolymer based on aromatic/aliphatic isocyanates. It has a good balance of adhesion, hardness, flexibility and water resistance. In combination with acrylic dispersions, this product improves sandability and blocking resistance. Suitable fields of application are wood varnishes for general industry, economic flooring varnishes, reinforcement of acrylic resins for various applications. ESACOTE PU 150 can be used alone or in combination with other polyurethane dispersions and/or with acrylic resins. view less | |
| ESACOTE PU 16 | LEHVOSS Group | ESACOTE PU 16 is a water-borne aliphatic PU dispersion based on polyether, with a good balance between hardness, flexibility, toughness, adhesion, and water resistance. The product has a good adhesion on different substrates like wood, plastic, and metal ...view more ESACOTE PU 16 is a water-borne aliphatic PU dispersion based on polyether, with a good balance between hardness, flexibility, toughness, adhesion, and water resistance. The product has a good adhesion on different substrates like wood, plastic, and metal and is easily compatible with the other ESACOTE dispersions. view less | |
| ESACOTE PU 180 | LEHVOSS Group | ESACOTE PU 180 is an opalescent liquid, waterborne aliphatic PU dispersion based on polyether, which gives a rubbery and flexible film with good chemical, water, and high blocking resistance. It is recommended as flexibiliser for acrylic resins, both for ...view more ESACOTE PU 180 is an opalescent liquid, waterborne aliphatic PU dispersion based on polyether, which gives a rubbery and flexible film with good chemical, water, and high blocking resistance. It is recommended as flexibiliser for acrylic resins, both for interior than exterior application. view less | |
| ESACOTE PU 186 | LEHVOSS Group | ESACOTE PU 186 is an opalescent liquid solvent free waterborne aliphatic PU dispersion based on polyether poliols, which gives a flexible and rubbery film. It is recommended as filming aid and flexibiliser for acrylic resins, for Joinery applications. |
