| ADM 1000 | LEHVOSS Group | ADM 1000 is an amber fluid, APE/VOC-free, polyether polyol nonionic surfactant. It is used in conjunction with a primary dispersant to enhance adsorption of the dispersant onto the pigment surface. It also controls dispersion rheology, increases pigment l...view more ADM 1000 is an amber fluid, APE/VOC-free, polyether polyol nonionic surfactant. It is used in conjunction with a primary dispersant to enhance adsorption of the dispersant onto the pigment surface. It also controls dispersion rheology, increases pigment loading, and enhances dispersion stability. This product is soluble in water, ethanol, mineral spirits, propylene glycol, toluene, and xylene. view less | |
| ADM 1500 | LEHVOSS Group | ADM 1500 is an opaque liquid, APE/VOC free, polyether polyol nonionic surfactant. It is used in conjunction with a primary dispersant to enhance adsorption of the dispersant onto the pigment surface. ADM 1500 and the selected dispersant should be fully in...view more ADM 1500 is an opaque liquid, APE/VOC free, polyether polyol nonionic surfactant. It is used in conjunction with a primary dispersant to enhance adsorption of the dispersant onto the pigment surface. ADM 1500 and the selected dispersant should be fully incorporated in the mill base prior to the introduction of any pigments. It promotes optimal pigment loading and controls dispersion rheology. This product is soluble in water, acetone, Arcosolv® DPM, Aromatic 100 Fluid, Butyl Cellusolv™, ethanol, mineral spirits, and propylene glycol. view less | |
| ADM 2100 | LEHVOSS Group | ADM 2100 is an amber fluid, APE/glycols and VOC free, low HLB surfactant primarily derived from renewable sources. It is used for pigment wetting and grinding as well as flow and leveling in solvent based paints and coatings. This product is soluble in am...view more ADM 2100 is an amber fluid, APE/glycols and VOC free, low HLB surfactant primarily derived from renewable sources. It is used for pigment wetting and grinding as well as flow and leveling in solvent based paints and coatings. This product is soluble in amyl acetate, Aromatic 100 Fluid, mineral spirits, petroleum oils, methyl ethyl ketone, vegetable oils, and xylene. It is insoluble in acetone, Arcosolv® DPM, and ethanol, and is dispersible in Butyl Cellosolv™. view less | |
| ADM 3100 | LEHVOSS Group | ADM 3100 is a clear fluid, bio-based amphoteric dispersant for use with inorganic pigments in aqueous systems. It offers excellent surface tension reduction in tint bases, as well as iron oxide colorant, TiO2, and ZnO dispersions. This product reduces gri...view more ADM 3100 is a clear fluid, bio-based amphoteric dispersant for use with inorganic pigments in aqueous systems. It offers excellent surface tension reduction in tint bases, as well as iron oxide colorant, TiO2, and ZnO dispersions. This product reduces grind times, secondary surfactant requirements, rub up, flooding, and floating. It also improves colorant acceptance into the base. It may be used alone or with a non-ionic surfactant, and must be fully dispersed into the mill base. view less | |
| ADM 3200 | LEHVOSS Group | ADM 3200 is an amber fluid, APE/VOC free, bio-based amphoteric dispersant for use in aqueous systems such as tint bases and carbon black, organic, and inorganic dispersions. It has 100% active content, 83% bio-based content, and is suitable for use in uni...view more ADM 3200 is an amber fluid, APE/VOC free, bio-based amphoteric dispersant for use in aqueous systems such as tint bases and carbon black, organic, and inorganic dispersions. It has 100% active content, 83% bio-based content, and is suitable for use in universal colorant formulations. This product improves color development, enhances formulation stability, and reduces pigment grind times, colorant flooding, floating, and rub up. It may be used with a non-ionic surfactant and must be fully dispersed into the mill base. view less | |
| ADM 500 | LEHVOSS Group | ADM 500 is an amber fluid, low HLB amphoteric surfactant that is 100% derived from renewable sources and is APE/glycols and VOC-free. This product is used for drilling muds, fuel additives, agricultural sprays, as well as pigment wetting and grinding. Thi...view more ADM 500 is an amber fluid, low HLB amphoteric surfactant that is 100% derived from renewable sources and is APE/glycols and VOC-free. This product is used for drilling muds, fuel additives, agricultural sprays, as well as pigment wetting and grinding. This product is dispersible in Butyl Cellosolve™ and Propylene Glycol. It is soluble in Aromatic 100 Fluid, Biodiesel, and Mineral Spirits and is insoluble in water, acetone, and ethanol. view less | |
| ADM 6200 | LEHVOSS Group | ADM 6200 is an amber fluid, bio-based amphoteric dispersant with anionic pigment affinic groups. It is designed for aqueous applications such as pigment dispersions and tint bases. It has 93% bio-based and 100% active content. It is APE and VOC free and h...view more ADM 6200 is an amber fluid, bio-based amphoteric dispersant with anionic pigment affinic groups. It is designed for aqueous applications such as pigment dispersions and tint bases. It has 93% bio-based and 100% active content. It is APE and VOC free and has excellent surface tension. This product helps reduce or eliminate the use of other surfactants as well as reduces settling, rub up, flooding, and floating. It improves colorant acceptance into the base and is suitable for use in universal colorant formulations. view less | |
| AEPD® | LEHVOSS Group | AEPD® is an efficient pigment dispersant which provides excellent properties in slurries used for coatings. When this product is used as the primary dispersant, it achieves improved rheology, pH stability, low odor, and increased color acceptance with uni...view more AEPD® is an efficient pigment dispersant which provides excellent properties in slurries used for coatings. When this product is used as the primary dispersant, it achieves improved rheology, pH stability, low odor, and increased color acceptance with universal colorants. It has intermediate base strength and provides a good balance of pH development and reserve alkalinity properties. Under ambient conditions, it will readily react with formaldehyde that finds application or controlling excess formaldehyde released from numerous products. Associated odor and irritation can be minimized. view less | |
| AEPD™ VOX 1000 | LEHVOSS Group | AEPD™ VOX 1000 is a new multifunctional additive for low odor, zero VOC interior water-based paints. It's very mild odor, high boiling point, and low vapor pressure make it the ideal formulating tool. The addition of this product to the grind will help al...view more AEPD™ VOX 1000 is a new multifunctional additive for low odor, zero VOC interior water-based paints. It's very mild odor, high boiling point, and low vapor pressure make it the ideal formulating tool. The addition of this product to the grind will help allow improved pigment dispersion resulting in lower primary dispersant levels and adjust and control pH. It will not contribute to the VOC of the paint and will virtually eliminate amine or ammonia type odors. view less | |
| ALKATERGE® E | LEHVOSS Group | ALKATERGE® E is highly soluble in most organic liquids, but is only very slightly soluble in water. Even so, a concentration of 0.001% by weight of this product in water will reduce the surface tension to about 40 mN/m. Although it does not lower the surf...view more ALKATERGE® E is highly soluble in most organic liquids, but is only very slightly soluble in water. Even so, a concentration of 0.001% by weight of this product in water will reduce the surface tension to about 40 mN/m. Although it does not lower the surface tension of mineral oil, the presence of 0.1% materially reduces the interfacial tension against water. ALKATERGE® E is used for paper, textiles, metal cleaners, salts, and soaps. It is also used as an emulsion stabilizer and an acid acceptor. view less | |
| ALKATERGE® T | LEHVOSS Group | ALKATERGE® T is one of a series of oxazoline-type nonvolatile surface active agents. At ordinary room temperature, it is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones. It is moderately soluble in aliphatic hyd...view more ALKATERGE® T is one of a series of oxazoline-type nonvolatile surface active agents. At ordinary room temperature, it is a waxy solid which is highly soluble in aromatic hydrocarbons and lower alcohols or ketones. It is moderately soluble in aliphatic hydrocarbons, and miscible with most vegetable oils. In its liquid state, it is miscible with almost all organic liquids. ALKATERGE® T has been utilized as a corrosion inhibitor, an emulsifier, and as a dispersant in a variety of applications. When properly incorporated into a formulation, it can often perform all these functions simultaneously as well as other specific to particular systems. view less | |
| AMINE™ CS-1235 | LEHVOSS Group | AMINE™ CS-1235 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both a...view more AMINE™ CS-1235 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both an aldehyde and as an amine.They can be utilized as alkalinity modifiers, corrosion inhibitors, or emulsifiers in formulated products. These compounds can additionally be employed as curing agents or reactive diluents in the production of either acid or alkaline catalyzed polymers. view less | |
| AMINE™ CS-1246 | LEHVOSS Group | AMINE™ CS-1246 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both a...view more AMINE™ CS-1246 is part of an oxazolidine series that are saturated heterocyclic compounds prepared by reacting primary amino alcohols with formaldehyde. They are highly useful materials for a wide variety of applications. Chemically, they behave as both an aldehyde and as an amine.They can be utilized as alkalinity modifiers, corrosion inhibitors, or emulsifiers in formulated products. These compounds can additionally be employed as curing agents or reactive diluents in the production of either acid or alkaline catalyzed polymers. view less | |
| AMP™ | LEHVOSS Group | AMP™ Dispersant is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. This mobile liquid with a relatively low viscosity remains liquid at temperature as low as 4°C/39ºF to permit easy, convenient handling. It acts as a formaldeh...view more AMP™ Dispersant is a multifunctional specialty additive containing 2-amino-2-methyl-1-propanol. This mobile liquid with a relatively low viscosity remains liquid at temperature as low as 4°C/39ºF to permit easy, convenient handling. It acts as a formaldehyde scavenger and co-dispersant for particulate systems. It is also an efficient amine for resin neutralization based on its high base strength and its relatively low odor and low molecular weight. view less | |
| AMP™ 75 | LEHVOSS Group | AMP™ 75 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -48°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight t...view more AMP™ 75 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -48°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to be an efficient amine for neutralization. It is also used as a corrosion inhibitor for steam-condensate lines, a component of a powerful anionic emulsifier systems, and acts as a formaldehyde scavenger and a co-dispersant for particulate systems. view less | |
| AMP™ 90 | LEHVOSS Group | AMP™ 90 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -37°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight t...view more AMP™ 90 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as -37°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to be an efficient amine for neutralization. It is also used as a corrosion inhibitor for steam-condensate lines, a component of a powerful anionic emulsifier systems, and acts as a formaldehyde scavenger and a co-dispersant for particulate systems. view less | |
| AMP™ 95 | LEHVOSS Group | AMP™ 95 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as 4°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to ...view more AMP™ 95 is a colorless, mobile liquid with a relatively low viscosity that remains liquid at temperatures as low as 4°C to permit easy, convenient handling. Some benefits of this product include a high base strength and relatively low molecular weight to be an efficient amine for neutralization. It is also used as a corrosion inhibitor for steam-condensate lines, a component of a powerful anionic emulsifier systems, and acts as a formaldehyde scavenger and a co-dispersant for particulate systems. view less | |
| AMPD™ | LEHVOSS Group | AMPD™ is a primary alkanolamine that is white, crystalline solid and has a slight amine odor. Its alkalinity and molecular weight are virtually the same as those of diethanolamine. It is one of the series of nitroparaffin-derived primary alka-nolamines av...view more AMPD™ is a primary alkanolamine that is white, crystalline solid and has a slight amine odor. Its alkalinity and molecular weight are virtually the same as those of diethanolamine. It is one of the series of nitroparaffin-derived primary alka-nolamines available from ANGUS worldwide. AMPD™ is used as an efficient primary-amine neutralizing agent for acid-functional raw materials used in cosmetic and personal care products. view less | |
| Benzophenone | LEHVOSS Group | Benzophenone are off-white flakes designed for UV light photopolymerisation of systems based on acrylic oligomers and monomers. The radical generation occurs via Hydrogen abstraction by the action of a co-initiator such as tertiary amines. This product is...view more Benzophenone are off-white flakes designed for UV light photopolymerisation of systems based on acrylic oligomers and monomers. The radical generation occurs via Hydrogen abstraction by the action of a co-initiator such as tertiary amines. This product is insoluble in water, and soluble in most common organic solvents, monomers, and oligomers for UV applications. The main suggested applications are in the manufacturing of OPV, coatings for flooring, printing inks, adhesives, and clear lacquers for wood, plastic, paper, metal, optical fibers. view less | |
| Capstone® FS-10 | LEHVOSS Group | Capstone® FS-10 is a clear to yellow liquid anionic fluorinated surfactant that reduces the surface tension of aqueous solutions to very low levels. It demonstrates exceptional chemical stability in corrosive media and, in particular, very acidic solution...view more Capstone® FS-10 is a clear to yellow liquid anionic fluorinated surfactant that reduces the surface tension of aqueous solutions to very low levels. It demonstrates exceptional chemical stability in corrosive media and, in particular, very acidic solutions. It also is a low-foaming agent that imparts additional properties that may prove useful in formulations based on aggressive (highly acidic, oxidizing, or reducing) media. view less | |
| Capstone® FS-22 | LEHVOSS Group | Capstone® FS-22 is a solvent-borne additive that provides low surface tension in solvent-based and high solids systems. It is compatible with most solvent-based systems. The low surface tension enables better wetting, spreading, and leveling. When cured i...view more Capstone® FS-22 is a solvent-borne additive that provides low surface tension in solvent-based and high solids systems. It is compatible with most solvent-based systems. The low surface tension enables better wetting, spreading, and leveling. When cured into a coating, this product provides surface water and oil repellency and chemical resistance to the film. Used in a cleaning system, FS-22 boosts stain resistance through surface energy modification, and it provides foaming properties in non-polar systems. At very low use rates, it delivers advanced wetting and leveling power. view less | |
| Capstone® FS-30 | LEHVOSS Group | Capstone® FS-30 is a general-purpose, water-soluble, ethoxylated nonionic fluorosurfactant that modifies surface energies at very low concentrations. This product is VOC-free, APEO-free, nonflammable and is compatible with additives and resins of any ioni...view more Capstone® FS-30 is a general-purpose, water-soluble, ethoxylated nonionic fluorosurfactant that modifies surface energies at very low concentrations. This product is VOC-free, APEO-free, nonflammable and is compatible with additives and resins of any ionic class. FS-30 is stable in acidic, basic, brine, and hard water environments. Due to its good stability across a bro-ad pH range, it is an ideal wetting and leveling agent for many aqueous applications. It is effective as a plating bath aid by reducing drag-out from bath applications. Additionally, it can be used in coatings to reduce surface defects and to lower surface tension in many types of cleaning formulations. view less | |
| Capstone® FS-31 | LEHVOSS Group | Capstone® FS-31 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable an...view more Capstone® FS-31 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable and is compatible with additives and resins of any ionic class. Even at very low concentrations, FS-31 can deliver tremendous wetting power. It is stable in acidic, basic, brine, and hard water environments, making it easy to formulate into a variety of systems. It is effective as an additive in cleaning products, paints, coatings, adhesives, and films. view less | |
| Capstone® FS-3100 | LEHVOSS Group | Capstone® FS-3100 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable,...view more Capstone® FS-3100 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable, and is compatible with additives and resins of any ionic class. Even at very low concentrations, it can deliver tremendous wetting power. This product is stable in acidic, basic, brine, and hard water environments, making it easy to formulate into a variety of systems. view less | |
| Capstone® FS-34 | LEHVOSS Group | Capstone® FS-34 is a general-purpose, water-soluble, ethoxylated nonionic fluorosurfactant that modifies surface energies at very low concentrations. It is VOC-free, APEO-free, non-flammable and is compatible with additives and resins of any ionic class. ...view more Capstone® FS-34 is a general-purpose, water-soluble, ethoxylated nonionic fluorosurfactant that modifies surface energies at very low concentrations. It is VOC-free, APEO-free, non-flammable and is compatible with additives and resins of any ionic class. This product is stable in acidic, basic, brine, and hard water environments. Due to its good stability across a broad pH range, FS-34 is an ideal wetting and leveling agent for many aqueous applications. It is also effective as a plating bath aid by reducing drag-out from bath applications. Additionally, it can be used in coatings to reduce surface defects and to lower surface tension in many types of cleaning formulations. view less | |
| Capstone® FS-35 | LEHVOSS Group | Capstone® FS-35 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, as well as enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-f...view more Capstone® FS-35 is a nonionic fluorosurfactant that provides exceptionally low surface tension in aqueous or solvent-based products, as well as enabling better wetting, spreading, leveling, and other beneficial properties. It is VOC-free, APEO-free, non-flammable, and is compatible with additives and resins of any ionic class. Even at very low concentrations, FS-35 can deliver tremendous wetting power. It is stable in acidic, basic, brine, and hard water environments making it easy to formulate into a variety of systems. It is also effective as an additive in cleaning products, paints, coatings, adhesives, and films. view less | |
| Capstone® FS-50 | LEHVOSS Group | Capstone® FS-50 is an amphoteric fluorosurfactant that significantly reduces the surface tension of aqueous solutions and is also useful in providing sustained foam. It enables the formation of a thin low surface tension aqueous film, which is useful for ...view more Capstone® FS-50 is an amphoteric fluorosurfactant that significantly reduces the surface tension of aqueous solutions and is also useful in providing sustained foam. It enables the formation of a thin low surface tension aqueous film, which is useful for creating surface defect-free films over low surface tension or contaminated substrates. FS-50 is recommended as a surface tension reducing and foaming agent for use in oilfield operations, industrial and institutional cleaning, floor care applications, as well as latex paints and alkyd emulsions. view less | |
| Capstone® FS-51 | LEHVOSS Group | Capstone® FS-51 is an amphoteric amine oxide-based fluorosurfactant that significantly reduces the surface tension of aqueous solutions and is also useful in providing sustained foam. It enables the formation of a thin low surface tension aqueous film, wh...view more Capstone® FS-51 is an amphoteric amine oxide-based fluorosurfactant that significantly reduces the surface tension of aqueous solutions and is also useful in providing sustained foam. It enables the formation of a thin low surface tension aqueous film, which is useful for creating surface defect-free films over low surface tension or contaminated substrates. FS-51 is recommended as a surface tension reducing and foaming agent for use in oilfield operations, industrial and institutional cleaning, floor care applications, as well as latex paints and alkyd emulsions. view less | |
| Capstone® FS-60 | LEHVOSS Group | Capstone® FS-60 is a water-soluble, anionic fluorosurfactant that gives low aqueous surface tensions with minimal foaming. It offers excellent wetting, leveling, anti-block, and anti-catering performance. This fluorosurfactant is specifically formulated f...view more Capstone® FS-60 is a water-soluble, anionic fluorosurfactant that gives low aqueous surface tensions with minimal foaming. It offers excellent wetting, leveling, anti-block, and anti-catering performance. This fluorosurfactant is specifically formulated for leveling of floor finishes. It is also effective at reducing the surface tension of concentrated cleaning solutions. view less | |
| Capstone® FS-61 | LEHVOSS Group | Capstone® FS-61 is a VOC-free and APEO-free, water-based dispersion, anionic fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It offers excellent wetting, leveling, anti-block, and flow control. This environ...view more Capstone® FS-61 is a VOC-free and APEO-free, water-based dispersion, anionic fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It offers excellent wetting, leveling, anti-block, and flow control. This environmentally friendly alternative fluorosurfactant can be used in a variety of applications including architectural coatings, industrial finishes, floor care formulations, wood coatings, specialty cleaners, and metal cleaning. view less | |
| Capstone® FS-63 | LEHVOSS Group | Capstone® FS-63 is a water-soluble, anionic fluorosurfactant that gives low aqueous surface tensions with minimal foaming. It offers excellent wetting, leveling, anti-block, and dirt pick-up resistance, This fluorosurfactant can be used in a variety of ap...view more Capstone® FS-63 is a water-soluble, anionic fluorosurfactant that gives low aqueous surface tensions with minimal foaming. It offers excellent wetting, leveling, anti-block, and dirt pick-up resistance, This fluorosurfactant can be used in a variety of applications including architectural coatings, industrial finishes, floor care formulations, wood coatings, specialty cleaners, and metal cleaning. view less | |
| Capstone® FS-64 | LEHVOSS Group | Capstone® FS-64 is a VOC-free, water-soluble, anionic, proprietary fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It combines the unique properties of fluorine with the strength of a DuPont™ Renewably Sour...view more Capstone® FS-64 is a VOC-free, water-soluble, anionic, proprietary fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It combines the unique properties of fluorine with the strength of a DuPont™ Renewably Sourced™ material. This environmentally preferred fluorosurfactant can be used in a variety of applications including architectural coatings, industrial finishes, floor care formulations, and cleaning solutions. view less | |
| Capstone® FS-65 | LEHVOSS Group | Capstone® FS-65 is a VOC-free, water-soluble fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It has a strong nonionic character under all conditions. It provides good stability, surface tension reduction an...view more Capstone® FS-65 is a VOC-free, water-soluble fluorosurfactant that gives low aqueous surface tensions only achievable with fluorosurfactants. It has a strong nonionic character under all conditions. It provides good stability, surface tension reduction and sustainable foaming in brine media. In addition, it provides good stability, surface tension reduction, and low foaming in aggressive media (acidic and basic). This environmentally preferred fluorosurfactant can be used in a variety of applications including architectural coatings, industrial finishes, floor care formulations, etching applications, and cleaning solutions. view less | |
| Capstone® FS-66 | LEHVOSS Group | Capstone® FS-66 is an anionic fluorosurfactant that contains no solvents. The absence of solvents makes this product a very effective surface modifying additive in solvent-based and neat coating system. It improves wetting, leveling, and anti-soiling for ...view more Capstone® FS-66 is an anionic fluorosurfactant that contains no solvents. The absence of solvents makes this product a very effective surface modifying additive in solvent-based and neat coating system. It improves wetting, leveling, and anti-soiling for solvent-based points, and anti-smearing agent for inks in paint and coatings applications. It also is used in internal and external mold releases for resin, plastic, and metal molding, view less | |
| Capstone® FS-81 | LEHVOSS Group | Capstone® FS-81 is a fluorinated polymeric coating additive. It is a water dispersion that can improve cleanability of oily dirt and provide oil repellency to flat architectural paints and waterborne coatings and does not affect water repellency. The appl...view more Capstone® FS-81 is a fluorinated polymeric coating additive. It is a water dispersion that can improve cleanability of oily dirt and provide oil repellency to flat architectural paints and waterborne coatings and does not affect water repellency. The applications improves oil repellency and washability of oil based stains for low sheen interior latex wall paints. It provides good dirt pickup resistance for exterior latex paints and can be used as a wetting agent in water based and polar solvent based coatings and printing inks. view less | |
| Capstone® FS-82 | LEHVOSS Group | Capstone® FS-82 is a clear to hazy amber liquid, aqueous dispersion of a cationic fluorinated copolymer. It provides oil and water repellency, stain resistance, and easy stain cleanup. This product is used for water-based waxes and polishes for automobile...view more Capstone® FS-82 is a clear to hazy amber liquid, aqueous dispersion of a cationic fluorinated copolymer. It provides oil and water repellency, stain resistance, and easy stain cleanup. This product is used for water-based waxes and polishes for automobiles and for wood stain impregnation. view less | |
| Capstone® FS-83 | LEHVOSS Group | Capstone® FS-83 is a solvent-borne additive that provides low surface tension in solvent-based paints. It is compatible with most organic solvent-based systems. The low surface tension enables better wetting, spreading, leveling to correct solvent-borne c...view more Capstone® FS-83 is a solvent-borne additive that provides low surface tension in solvent-based paints. It is compatible with most organic solvent-based systems. The low surface tension enables better wetting, spreading, leveling to correct solvent-borne coating defects, such as fisheyes, craters, pinholes, and orange peel. When cured into a coating, it provides water and oil repellency, as well as chemical resistance, to the film. view less | |
| Capstone® LPA | LEHVOSS Group | Capstone® LPA is a solvent-based, partially fluorinated polymer used for the protection of leathers and textiles. It is typically used for spray finishing of leathers and for formulating aerosols. It is based on six fluorinated carbon molecules that canno...view more Capstone® LPA is a solvent-based, partially fluorinated polymer used for the protection of leathers and textiles. It is typically used for spray finishing of leathers and for formulating aerosols. It is based on six fluorinated carbon molecules that cannot break down to PFOA in the environment. Capstone® LPA has excellent water and oil repellency. It has excellent resistance to oil- and water-based stains. view less | |
| Capstone® LPW | LEHVOSS Group | Capstone® LPW is an exceptional product for the protection of leather and suede. It was developed using novel patented next generation technology that delivers superior performance and aesthetics while meeting your sustainability objectives. This product ...view more Capstone® LPW is an exceptional product for the protection of leather and suede. It was developed using novel patented next generation technology that delivers superior performance and aesthetics while meeting your sustainability objectives. This product can be applied either in a drum or as a spray finish to provide a durable and invisible barrier to water, oil, dirt, and stains. The treated leather's aesthetic properties are not affected by the application because Capstone® LPW does not form a polymer film coating, leather remains breathable and luxurious. view less | |
| Capstone® ST-100HS | LEHVOSS Group | Capstone® ST-100HS is an aqueous fluorochemical dispersion that provides a durable, subsurface, transparent protective barrier against oil and water on porous mineral surfaces. It is used in water-based penetrating sealers for stone, unglazed tile, grout,...view more Capstone® ST-100HS is an aqueous fluorochemical dispersion that provides a durable, subsurface, transparent protective barrier against oil and water on porous mineral surfaces. It is used in water-based penetrating sealers for stone, unglazed tile, grout, terra cotta, and other porous mineral surfaces such as concrete, brick, stone, and tile. This product provides oil and water repellency, stain resistance, and easy stain cleanup. view less | |
| Capstone® ST-110 | LEHVOSS Group | Capstone® ST-110 is an aqueous fluorochemical dispersion that provides a durable, subsurface, transparent protective barrier against oil and water on porous and polished mineral surfaces such as stone and tile. The product is used in water-based penetrati...view more Capstone® ST-110 is an aqueous fluorochemical dispersion that provides a durable, subsurface, transparent protective barrier against oil and water on porous and polished mineral surfaces such as stone and tile. The product is used in water-based penetrating sealers for natural stone, unglazed tile, grout, terra cotta, and other porous mineral surfaces such as concrete and brick. Capstone® ST-110 provides oil and water repellency, stain resistance, and easy stain cleanup. view less | |
| Capstone® ST-200 | LEHVOSS Group | Capstone® ST-200 is a solvent-based acrylic fluorinated co-polymer that provides a durable, subsurface, transparent, protective barrier against oil and water on porous surfaces such as stone, tile, and grout. It is used in solvent-based penetrating sealer...view more Capstone® ST-200 is a solvent-based acrylic fluorinated co-polymer that provides a durable, subsurface, transparent, protective barrier against oil and water on porous surfaces such as stone, tile, and grout. It is used in solvent-based penetrating sealers, especially for low-porosity stone, unglazed tile, grout, terra cotta, and other porous surfaces such as concrete and brick. Capstone® ST-200 provides oil and water repellency, stain resistance, and easy stain cleanup. view less | |
| Capstone® ST-300 | LEHVOSS Group | Capstone® ST-300 is a yellow to amber colored aqueous fluorochemical solution that can be used in water-based penetrating sealers to provide a durable, non-film-forming, transparent, protective barrier against oil and water on porous surfaces such as ston...view more Capstone® ST-300 is a yellow to amber colored aqueous fluorochemical solution that can be used in water-based penetrating sealers to provide a durable, non-film-forming, transparent, protective barrier against oil and water on porous surfaces such as stone, unglazed tile, grout, terra cotta, concrete, and brick. This product provides excellent oil and water repellency, stain resistance, and easy stain cleanup. view less | |
| Capstone® ST-500 | LEHVOSS Group | Capstone® ST-500 is a yellow to amber colored aqueous fluorochemical solution that can be used in water-based penetrating sealers to provide a durable, non-film-forming, transparent, protective barrier against oil and water on porous surfaces such as ston...view more Capstone® ST-500 is a yellow to amber colored aqueous fluorochemical solution that can be used in water-based penetrating sealers to provide a durable, non-film-forming, transparent, protective barrier against oil and water on porous surfaces such as stone, unglazed tile, grout, terra cotta, concrete, and brick. This product provides excellent oil and water repellency, stain resistance, and ease of cleaning. view less | |
| CHAINGUARD® I-15 | LEHVOSS Group | CHAINGUARD® I-15 is a highly efficient scavenger of free radicals and is widely used to terminate (shortstop) the free-radical emulsion polymerizations of styrene-butadiene and acrylonitrile-butadiene in the production of SBR and NBR elastomers, respectiv...view more CHAINGUARD® I-15 is a highly efficient scavenger of free radicals and is widely used to terminate (shortstop) the free-radical emulsion polymerizations of styrene-butadiene and acrylonitrile-butadiene in the production of SBR and NBR elastomers, respectively. This product is also expected to be effective in stopping other polymerizations that proceed via a free radical mechanism, such as emulsion polymerizations of chloroprene and fluorinated olefins. view less | |
| CORRGUARD™ LSA | LEHVOSS Group | CORRGUARD™ LSA is a new product developed by ANGUS in response to a market request for a product containing a maximum of 1% secondary amine. It contains less than 0.75% of secondary amines by product specification and is made from an enhanced production p...view more CORRGUARD™ LSA is a new product developed by ANGUS in response to a market request for a product containing a maximum of 1% secondary amine. It contains less than 0.75% of secondary amines by product specification and is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. view less | |
| CORRGUARD™ LSA 6000 | LEHVOSS Group | CORRGUARD™ LSA 6000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH dev...view more CORRGUARD™ LSA 6000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH development and neutralization of acidic components as well as improved resistance to microbial degradation. It also offers enhanced performance of triazine biocides and minimal ammonia release, leaching of cobalt, and foam generation. view less | |
| CORRGUARD™ LSA 7000 | LEHVOSS Group | CORRGUARD™ LSA 7000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH dev...view more CORRGUARD™ LSA 7000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH development and neutralization of acidic components as well as improved resistance to microbial degradation. It also offers enhanced performance of triazine biocides and minimal ammonia release, leaching of cobalt, and foam generation. view less | |
| CORRGUARD™ LSA 8000 | LEHVOSS Group | CORRGUARD™ LSA 8000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH dev...view more CORRGUARD™ LSA 8000 is made from an enhanced production process based on the needs set forth by ANGUS customers in minimizing secondary amine levels. This product offers key benefits to metalworking fluid formulators such as cost efficient alkaline pH development and neutralization of acidic components as well as improved resistance to microbial degradation. It also offers enhanced performance of triazine biocides and minimal ammonia release, leaching of cobalt, and foam generation. view less | |
| CORRGUARD™ SI | LEHVOSS Group | CORRGUARD™ SI is a yellow to brown, clear to hazy, organic, anionic liquid. It is the response to the need for improved aluminum and galvanized steel staining control. This product inhibits staining on common aluminum alloys including cast Al 380, as well...view more CORRGUARD™ SI is a yellow to brown, clear to hazy, organic, anionic liquid. It is the response to the need for improved aluminum and galvanized steel staining control. This product inhibits staining on common aluminum alloys including cast Al 380, as well as galvanized steel. This unique building block is free of silicates and phosphorus, and is suitable for long-life bio-resistant formulations. CORRGUARD™ SI also provides emulsification and lubricity properties. This multi-functionality may allow other formulation ingredients to be reduced, allowing fluid cost and performance to be optimized. view less | |
| DMAMP™ 80 | LEHVOSS Group | DMAMP™ 80, in combination with an unsaturated fatty acid, is extremely effective in producing emulsions of waxes. It is recommended for evaluation as a vapor-phase corrosion inhibitor in steam condensate systems, but can also be used in water-based hydrau...view more DMAMP™ 80, in combination with an unsaturated fatty acid, is extremely effective in producing emulsions of waxes. It is recommended for evaluation as a vapor-phase corrosion inhibitor in steam condensate systems, but can also be used in water-based hydraulic fluids and in high-water content aerosol cans. This product is effective as a solubilizer for resin systems which contain free carboxylic acid groups and are designed to be dispersible in water. It is also effective as a catalyst for production of polyurethane foams. view less | |
| EcoFlat™ 1880 | LEHVOSS Group | EcoFlat™ 1880 is an environmentally friendly natural matting agent for paints. It is a fine, white powder that comes from Planta Africa, Chile. | |
| ESACURE 1001 M | LEHVOSS Group | ESACURE 1001 M is an off white powder, difunctional photoinitiator of the ketosulphone class. It is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. This product is a new high reactive difunctional ph...view more ESACURE 1001 M is an off white powder, difunctional photoinitiator of the ketosulphone class. It is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. This product is a new high reactive difunctional photoinitiator particularly suitable for pigmented systems. Its reactivity is influenced by the presence of co-initiator that contribute to overcome oxygen inhibition too. Due to its molecular structure, it is particulary suitable for all systems where low migration and low extraction values are needed. view less | |
| ESACURE 1064 | LEHVOSS Group | ESACURE 1064 is a clear, pale yellow liquid 50% propylene carbonate solution of Arylsulfonium Hexafluorophosphate salts that is a highly reactive cationic photoinitiator. It is insoluble in water and soluble in most common organic solvents, cycloaliphatic...view more ESACURE 1064 is a clear, pale yellow liquid 50% propylene carbonate solution of Arylsulfonium Hexafluorophosphate salts that is a highly reactive cationic photoinitiator. It is insoluble in water and soluble in most common organic solvents, cycloaliphatic epoxide, and vinylethers. This product is suitable for UV systems where low shrinkage and excellent adhesion are required. Its main applications are in the manufacturing of graphic arts, laminating adhesives, and coatings for electronics. view less | |
| ESACURE 1187 | LEHVOSS Group | ESACURE 1187 is a clear, light brown liquid propylene carbonate solution of a modified sulphonium salt hexafluorophosphate that is a new cationic benzene free photoinitiator. It is insoluble in water and soluble in most common organic solvents, cycloaliph...view more ESACURE 1187 is a clear, light brown liquid propylene carbonate solution of a modified sulphonium salt hexafluorophosphate that is a new cationic benzene free photoinitiator. It is insoluble in water and soluble in most common organic solvents, cycloaliphatic epoxide, and vinylethers. This product is suitable for UV systems where low shrinkage and excellent adhesion are required. It doesn’t develop benzene after curing so it is particularly suitable for food packaging applications. Its main applications are in the manufacturing of graphic arts, laminating adhesives, and coatings for electronics. view less | |
| ESACURE 1188 | LEHVOSS Group | ESACURE 1188 is a clear, light brown liquid oxetane solution of a modified sulphonium salt hexafluorophosphate that is a new cationic, benzene free, photoinitiator. It is insoluble in water and soluble in most common organic solvents, cycloaliphatic epoxi...view more ESACURE 1188 is a clear, light brown liquid oxetane solution of a modified sulphonium salt hexafluorophosphate that is a new cationic, benzene free, photoinitiator. It is insoluble in water and soluble in most common organic solvents, cycloaliphatic epoxide, and vinylethers. This product is suitable for UV systems where low shrinkage and excellent adhesion are required. It doesn't develop benzene after curing so it is particularly suitable for food packaging. Its main applications are in the manufacturing of graphic arts, laminating adhesives, and coatings for electronics. view less | |
| ESACURE A 198 | LEHVOSS Group | ESACURE A 198 is a new polyfunctional high molecular weight amine that is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. It is a co-initiator that, combined with Type II photoinitiators, gives high ...view more ESACURE A 198 is a new polyfunctional high molecular weight amine that is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. It is a co-initiator that, combined with Type II photoinitiators, gives high speed cure in both clear and pigmented systems. It develops a very low level of odor and yellowing during and after curing. Due to its molecular structure, it is particularly suitable for all systems where low migration and low extraction values are needed. view less | |
| ESACURE DP 250 | LEHVOSS Group | ESACURE DP 250 is a white viscous liquid, stable water emulsion based on 32% of active photoinitiator. It is easily dispersible in water based systems. This product is a stable non ionic water emulsion characterized by high reactivity and low yellowing af...view more ESACURE DP 250 is a white viscous liquid, stable water emulsion based on 32% of active photoinitiator. It is easily dispersible in water based systems. This product is a stable non ionic water emulsion characterized by high reactivity and low yellowing after curing. This photoinitiator is particularly designed for waterborne pigmented UV curable coatings. Its main suggested applications are in the manufacturing of thin and thick layers water based clear and white pigmented coatings. view less | |
| ESACURE EDB | LEHVOSS Group | ESACURE EDB is an off white powder that is insoluble in water, soluble in common organic solvents, monomers and oligomers for UV applications. This product is a coinitiator that combined with type two photoinitiators, gives high speed cure in both clear a...view more ESACURE EDB is an off white powder that is insoluble in water, soluble in common organic solvents, monomers and oligomers for UV applications. This product is a coinitiator that combined with type two photoinitiators, gives high speed cure in both clear and pigmented systems. Its main suggested applications are in the manufacturing of clear coatings and printing inks such as off set, flexo, screen, gravure, and xerographic. view less | |
| ESACURE HB | LEHVOSS Group | ESACURE HB is a clear, pale yellow liquid mixture of Benzophenone and Esacure KS300 a-hydroxy-cyclohexyl-phenyl-ketone. This product, used in combination with a coinitiator, is particularly suitable when high reactivity and low yellowing are required. Its...view more ESACURE HB is a clear, pale yellow liquid mixture of Benzophenone and Esacure KS300 a-hydroxy-cyclohexyl-phenyl-ketone. This product, used in combination with a coinitiator, is particularly suitable when high reactivity and low yellowing are required. Its main suggested applications are in the manufacturing of graphic arts such as OVP printing inks as well as clear lacquers for wood, plastic, paper, and metal. view less | |
| ESACURE ITX | LEHVOSS Group | ESACURE ITX is pale yellow powder that it insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is a Type II photoinitiator. When used with a suitable co-initiator, its is able to produce...view more ESACURE ITX is pale yellow powder that it insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is a Type II photoinitiator. When used with a suitable co-initiator, its is able to produce free radicals. Due to its particulary UV absorption profile, it is used for photopolymerisation high and low thickness pigmented systems. Used in combination with Esacure 1001 M shows a sensitizer effect enhancing the performance. It can be used with Esacure A198 and Esacure TPO for LED applications. view less | |
| ESACURE KB1 | LEHVOSS Group | ESACURE KB1 is a white crystalline powder that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is a highly reactive photoinitiator particularly suitable for acrylated systems or ...view more ESACURE KB1 is a white crystalline powder that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is a highly reactive photoinitiator particularly suitable for acrylated systems or polyester-styrene resins, also containing extenders and/or fillers. UV curable compositions based on ESACURE KB1 display excellent cure rate, dark storage stability (shelf life) even at high dosage rate, minimal variation in colour and low degree of odor. view less | |
| ESACURE KIP 100F | LEHVOSS Group | ESACURE KIP 100F is a yellow, viscous liquid mixture of ESACURE KIP 150 and ESACURE KL 200. It is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. This product is used when high reactivity, low curing...view more ESACURE KIP 100F is a yellow, viscous liquid mixture of ESACURE KIP 150 and ESACURE KL 200. It is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. This product is used when high reactivity, low curing odor and color stability are required. Its main applications are in the manufacturing of adhesives, graphic arts, and coatings for wood, plastic, paper, and metal. view less | |
| ESACURE KIP 150 | LEHVOSS Group | ESACURE KIP 150 is a yellow, very viscous liquid that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. It is an oligomeric polyfunctional α-hydroxyketon characterised by high reactivity and no...view more ESACURE KIP 150 is a yellow, very viscous liquid that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. It is an oligomeric polyfunctional α-hydroxyketon characterised by high reactivity and non yellowing properties. It is particularly recommended when low migration, low VOC, low odor, and low yellowing are required characteristic. Its main applications are in the manufacturing of adhesives, graphic arts, and coatings for wood, plastic, paper, and optical fibres. view less | |
| ESACURE KIP 160 | LEHVOSS Group | ESACURE KIP 160 is an off white powder, difunctional alpha-OH Ketone that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is a new photoinitiator characterized by excellent react...view more ESACURE KIP 160 is an off white powder, difunctional alpha-OH Ketone that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is a new photoinitiator characterized by excellent reactivity especially in comparison with conventional alpha hydroxy ketones. Its molecule was suited to shift the absorption spectrum to longer wavelength and to work perfectly with pigmented systems using conventional UV equipments. It shows a good performance with clear coatings too. view less | |
| ESACURE KIP 75 LT | LEHVOSS Group | ESACURE KIP 75 LT is a yellow, viscous liquid mixture of ESACURE KIP 150 and Tripropyleneglycoldiacrylate. It is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is an oligomeric pol...view more ESACURE KIP 75 LT is a yellow, viscous liquid mixture of ESACURE KIP 150 and Tripropyleneglycoldiacrylate. It is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non yellowing properties. It is particularly recommended when low migration and low odor are required characteristics. Its main applications are in the manufacturing of graphic arts, adhesives, and coatings for wood, plastic, paper, and metal. view less | |
| ESACURE KIP IT | LEHVOSS Group | ESACURE KIP IT is a yellow, viscous liquid mixture of ESACURE KIP 150 and Propoxilatedglycerol triacrylate. It is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is an oligomeric po...view more ESACURE KIP IT is a yellow, viscous liquid mixture of ESACURE KIP 150 and Propoxilatedglycerol triacrylate. It is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non yellowing properties. It is particularly recommended when low migration, low odor and low yellowing are required characteristics. Its main applications are for graphic arts, adhesives, and coatings for wood, plastic, paper, and metal. view less | |
| ESACURE KL 200 | LEHVOSS Group | ESACURE KL 200 is a clear, slightly yellow liquid that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is particularly indicated when good reactivity and low yellowing are requir...view more ESACURE KL 200 is a clear, slightly yellow liquid that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is particularly indicated when good reactivity and low yellowing are required. It is also suggested for photo polymerisation of unsaturated polyester styrene diluted. Its main applications are in the manufacturing of printing inks, putties, and clear lacquers for wood and plastics. view less | |
| ESACURE KS 300 | LEHVOSS Group | ESACURE KS 300 is a white granular powder that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is particularly indicated when good reactivity and low yellowing are required. Its ...view more ESACURE KS 300 is a white granular powder that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is particularly indicated when good reactivity and low yellowing are required. Its main applications are in the manufacturing of adhesives and clear lacquers for wood, plastic, and paper. view less | |
| ESACURE KT 55 | LEHVOSS Group | ESACURE KT 55 is a clear, yellow viscous liquid mixture of ESACURE TZT and ESACURE KIP 150. It is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product, used in combination with a coiniti...view more ESACURE KT 55 is a clear, yellow viscous liquid mixture of ESACURE TZT and ESACURE KIP 150. It is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product, used in combination with a coinitiator, is particularly suitable when high reactivity and low yellowing are required. Its main suggested applications are in the manufacturing of graphic arts such as OVP printing inks, as well as clear lacquers for wood, plastic, paper, and metal. view less | |
| ESACURE KTO 46 | LEHVOSS Group | ESACURE KTO 46 is a clear, yellow, stable liquid mixture of Trimethylbenzoyldiphenylphosphineoxide-α-hydroxyketones and Benzophenone derivatives. It is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications....view more ESACURE KTO 46 is a clear, yellow, stable liquid mixture of Trimethylbenzoyldiphenylphosphineoxide-α-hydroxyketones and Benzophenone derivatives. It is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. This product is particularly indicated for the photo polymerisation of UV curable pigmented systems when high reactivity, low curing odor, and low yellowing are required. Its main suggested applications are in the manufacturing of white pigmented coatings, clear high thickness coatings, and printing inks. view less | |
| ESACURE ONE | LEHVOSS Group | ESACURE ONE is an off white powder, difunctional alpha-hydroxy ketone photoinitiator that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is a new high reactive difunctional phot...view more ESACURE ONE is an off white powder, difunctional alpha-hydroxy ketone photoinitiator that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is a new high reactive difunctional photoinitiator particularly suitable for clear systems. Due to its molecular structure, it is particularly suitable for all systems where low VOC, low migration, and low extraction values are needed. It is also used for powder coatings, food packaging, and clear lacquers for wood, plastic, paper, metal, and optical fibers. view less | |
| ESACURE TPO | LEHVOSS Group | ESACURE TPO is a yellow powder that is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. This product is particularly suitable for the curing of white pigmented systems thin and thick layer. It is also...view more ESACURE TPO is a yellow powder that is insoluble in water and soluble in common organic solvents, monomers, and oligomers for UV applications. This product is particularly suitable for the curing of white pigmented systems thin and thick layer. It is also suggested for pigmented systems when high reactivity, low curing odor, and low yellowing are required. Its main applications are in the manufacturing of white pigmented coatings, clear thickness coatings, and printing inks. view less | |
| ESACURE TZM | LEHVOSS Group | ESACURE TZM is a clear, pale yellow liquid that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is particularly indicated for the photopolymerisation of UV curable systems when h...view more ESACURE TZM is a clear, pale yellow liquid that is insoluble in water and soluble in most common organic solvents, monomers, and oligomers for UV applications. This product is particularly indicated for the photopolymerisation of UV curable systems when high reactivity, low curing odor, and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines. Due to its liquid form, high solubility, and compatibility with the various curable systems, ESACURE TZM can be easily incorporated by mixing and stirring. view less | |
| ESACURE TZT | LEHVOSS Group | ESACURE TZT is a clear, pale yellow, eutectic liquid mixture of 2,4,6 trimethylbenzophenone and 4-methylbenzophenone. It is also a benzophenone free photoinitiator. This product is particularly indicated for the photopolymerisation of UV curable systems w...view more ESACURE TZT is a clear, pale yellow, eutectic liquid mixture of 2,4,6 trimethylbenzophenone and 4-methylbenzophenone. It is also a benzophenone free photoinitiator. This product is particularly indicated for the photopolymerisation of UV curable systems when high reactivity, low curing odor, and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines. Due to its liquid form, high solubility, and compatibility with the various curable systems, it can be easily incorporated by mixing and stirring. view less | |
| FLEXITANE™ CA 6000 | LEHVOSS Group | FLEXITANE™ CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When this produ...view more FLEXITANE™ CA 6000 is a versatile performance-enhancing specialty coating additive. It can be an effective solution to addressing formulation requirements, while often reducing the need for higher levels of special additives in the system. When this product is utilized in solvent based industrial coating systems, a combination of benefits is obtained during production and in the finished formulations. The benefits include enhanced electrostatic-spray application and enhanced pigment dispersion through displacement of monomolecular moisture. It also improves cure times, film performance, and film integrity due to superior substrate wetting. view less | |
| HYDROGUARD™ I-15 | LEHVOSS Group | HYDROGUARD™ I-15 is a proven product which has been used successfully for many years to treat a variety of boiler systems. It is cost effective, does not require a catalyst, and is designed for treatment of all types of steam generation systems, and has s...view more HYDROGUARD™ I-15 is a proven product which has been used successfully for many years to treat a variety of boiler systems. It is cost effective, does not require a catalyst, and is designed for treatment of all types of steam generation systems, and has successfully replaced hydrazine and sodium erythorbate in these systems. This product efficiently removes oxygen without catalysts and provides excellent passivation of steel surfaces in pre-boiler and boiler areas. It is safer to handle than hydrazine and has good storage stability even in vented bulk containers. view less | |
| INSOCAT BTP 11 | LEHVOSS Group | INSOCAT BTP 11 is a highly reactive Organic Titanate. It is soluble in many organic solvents and is supplied with hundred percent active content. It is extremely sensitive to moisture and is widely used as a catalyst for reactions such as Esterification, ...view more INSOCAT BTP 11 is a highly reactive Organic Titanate. It is soluble in many organic solvents and is supplied with hundred percent active content. It is extremely sensitive to moisture and is widely used as a catalyst for reactions such as Esterification, Trans-Esterification, and Olefin Polymerisation. It is recommended as a cross linking agent for wire enamels, surface coatings, and printing inks. It is also used as a surface modifier, adhesion promoter, wax and oil additives, and in the manufacture of scratch resistant glass. view less | |
| IPHA I-15 | LEHVOSS Group | IPHA I-15 is a primary alkylhydroxylamine that has shown excellent performance as a shortstop for styrene-butadiene emulsion polymerization. It is also a very effective oxygen scavenger/corrosion inhibitor for water treatment applications. This product ma...view more IPHA I-15 is a primary alkylhydroxylamine that has shown excellent performance as a shortstop for styrene-butadiene emulsion polymerization. It is also a very effective oxygen scavenger/corrosion inhibitor for water treatment applications. This product may also be useful in other application areas such as photographic processing, monomer stabilization, and as a reducing agent. view less | |
| LUVOGEL® 4 | LEHVOSS Group | LUVOGEL® 4 is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. It is used as an anti-settling and sag control agent in low to medium polar formulations, such as industrial coatings, do-it-yoursel...view more LUVOGEL® 4 is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. It is used as an anti-settling and sag control agent in low to medium polar formulations, such as industrial coatings, do-it-yourself-coatings, constructions paints, primers, printing inks, adhesives, and putties. view less | |
| LUVOGEL® 4-B | LEHVOSS Group | LUVOGEL® 4-B is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. This product is used as an anti-settling and sag control agent in low to medium polar formulations, such as industrial coatings, d...view more LUVOGEL® 4-B is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. This product is used as an anti-settling and sag control agent in low to medium polar formulations, such as industrial coatings, do-it-yourself-coatings, constructions paints, primers, printing inks, adhesives, and putties. view less | |
| LUVOGEL® 40 VP | LEHVOSS Group | LUVOGEL® 40 VP is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. This product is used as an anti-settling and sag control agent in low to medium polar formulations, such as industrial coatings,...view more LUVOGEL® 40 VP is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. This product is used as an anti-settling and sag control agent in low to medium polar formulations, such as industrial coatings, do-it-yourself-coatings, constructions paints, primers, printing inks, adhesives, and putties. view less | |
| LUVOGEL® 7 | LEHVOSS Group | LUVOGEL® 7 is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. This product is used as an anti-settling and sag control agent in medium to high polar formulations, such as industrial coatings, do...view more LUVOGEL® 7 is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. This product is used as an anti-settling and sag control agent in medium to high polar formulations, such as industrial coatings, do-it-yourself-coatings, constructions paints, primers, and printing inks. view less | |
| LUVOGEL® 7-B | LEHVOSS Group | LUVOGEL® 7-B is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. This product is used as an anti-settling and sag control agent in low to medium polar formulations, such as industrial coatings, d...view more LUVOGEL® 7-B is a rheological additive based on organically modified clay. The addition of a polar activator is recommended. This product is used as an anti-settling and sag control agent in low to medium polar formulations, such as industrial coatings, do-it-yourself-coatings, constructions paints, primers, printing inks, adhesives, and putties. view less | |
| LUVOGEL® ED | LEHVOSS Group | LUVOGEL® ED is a rheological additive based on organically modified clay. In formulations containing this product, thixotropic properties and a slight viscosity increase are obtained. The product may be incorporated in powder form or as pre-gel. | |
| LUVOGEL® SA 1 | LEHVOSS Group | LUVOGEL® SA 1 is a rheological additive based on organically modified clay. This product is used as an anti-settling and sag control agent in medium to higher polar formulations, such as industrial coatings, do-it-yourself-coatings, constructions paints, ...view more LUVOGEL® SA 1 is a rheological additive based on organically modified clay. This product is used as an anti-settling and sag control agent in medium to higher polar formulations, such as industrial coatings, do-it-yourself-coatings, constructions paints, primers, and printing inks. view less | |
| LUVOGEL® SA 10 | LEHVOSS Group | LUVOGEL® SA 10 is a self-activating powder additive based on organically modified clay.This product is used as an anti-settling and sag control agent in solvent based formulations. | |
| LUVOGEL® SA11 VP | LEHVOSS Group | LUVOGEL® SA11 VP is a selfactivating powder additive based on organically modified clay. This product is used as an anti-settling and sag control agent in low to medium polar solvent based formulations, such as industrial coatings, do-it-yourself-coatings...view more LUVOGEL® SA11 VP is a selfactivating powder additive based on organically modified clay. This product is used as an anti-settling and sag control agent in low to medium polar solvent based formulations, such as industrial coatings, do-it-yourself-coatings, constructions paints, primers, printing inks, adhesives and putties. view less | |
| LUVOGEL® W1 | LEHVOSS Group | LUVOGEL® W1 is an inorganic rheological additive for water based formulations. With this product, thixotropic flow properties and a slight viscosity increase are obtained in water based formulations. The powder is easy dispersible and suitable in a wide p...view more LUVOGEL® W1 is an inorganic rheological additive for water based formulations. With this product, thixotropic flow properties and a slight viscosity increase are obtained in water based formulations. The powder is easy dispersible and suitable in a wide pH-range. view less | |
| LUVOGEL® W2N | LEHVOSS Group | LUVOGEL® W2N is an inorganic rheological additive for water based formulations. With this product, a strong pseudoplastic flow behavior is achieved in water based formulations. The powder is easy dispersible and suitable for use in a wide pH-range. | |
| LUVOGEL® W3 | LEHVOSS Group | LUVOGEL® W3 is a modified bentonite, easy dispersible, for waterbased applications. This product is used within waterbased applications, such as adhesives, paints and coatings, polishes, and cleaners. LUVOGEL® W3 is leading to thermostable viscosity contr...view more LUVOGEL® W3 is a modified bentonite, easy dispersible, for waterbased applications. This product is used within waterbased applications, such as adhesives, paints and coatings, polishes, and cleaners. LUVOGEL® W3 is leading to thermostable viscosity control and to a thixotropic effect, adjusting the rheology of waterbased applications (anti-sagging, anti-settling). view less | |
| LUVOTIX® AB | LEHVOSS Group | LUVOTIX® AB is a finely micronized polyamide rheological additive. This product is used in solvent-borne and solvent-free medium polar liquid organic systems. Its optimum performance is achieved at process temperatures between 50 and 60°C. It is suitable ...view more LUVOTIX® AB is a finely micronized polyamide rheological additive. This product is used in solvent-borne and solvent-free medium polar liquid organic systems. Its optimum performance is achieved at process temperatures between 50 and 60°C. It is suitable for highly filled and gloss systems. It is used in paints and coatings, adhesives as well as in sealants, putties and other formulations. view less | |
| LUVOTIX® HP | LEHVOSS Group | LUVOTIX® HP is a finely micronized polyamide rheological additive. This product is used in solvent-borne and solvent-free medium to higher polar liquid organic systems. It is suitable as a thickener, thixotropic or anti-settling agent in paints and coatin...view more LUVOTIX® HP is a finely micronized polyamide rheological additive. This product is used in solvent-borne and solvent-free medium to higher polar liquid organic systems. It is suitable as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties, and other formulations. view less | |
| LUVOTIX® HT | LEHVOSS Group | LUVOTIX® HT is a rheological additive based on a modified castor oil derivative. This product controls the rheological properties of medium to higher polar liquid organic systems. It is used as a thickener, thixotropic or anti-settling agent in paints and...view more LUVOTIX® HT is a rheological additive based on a modified castor oil derivative. This product controls the rheological properties of medium to higher polar liquid organic systems. It is used as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties as well as in oils. In powder coatings, LUVOTIX® HT is used as a flow and leveling agent. view less | |
| LUVOTIX® HT 400 | LEHVOSS Group | LUVOTIX® HT 400 is a micronized powder additive based on a polyamide modified castor oil derivative. This product is used in powder coatings as surface enhancing additive. It improves substrate wetting, degassing, flow and levelling. It reduces the viscos...view more LUVOTIX® HT 400 is a micronized powder additive based on a polyamide modified castor oil derivative. This product is used in powder coatings as surface enhancing additive. It improves substrate wetting, degassing, flow and levelling. It reduces the viscosity of the powder coating melt. Its particle size distribution is optimized for the economical use in powder coatings. view less | |
| LUVOTIX® HT-SF | LEHVOSS Group | LUVOTIX® HT-SF is a finely micronised rheological additive based on a modified castor oil derivative. This product controls the rheological properties of medium to higher polar liquid organic systems. It is used as a thickener, thixotropic, or anti-settli...view more LUVOTIX® HT-SF is a finely micronised rheological additive based on a modified castor oil derivative. This product controls the rheological properties of medium to higher polar liquid organic systems. It is used as a thickener, thixotropic, or anti-settling agent in paints and coatings, adhesives, sealants, and putties as well as in oils. view less | |
| LUVOTIX® P 100-15 | LEHVOSS Group | LUVOTIX® P 100-15 is a rheological additive powder based on polyethylene. It consists of spherical particles of a polar oxidized polyethylene wax. It shows a narrow, well defined particle size distribution. This product controls the rheological properties...view more LUVOTIX® P 100-15 is a rheological additive powder based on polyethylene. It consists of spherical particles of a polar oxidized polyethylene wax. It shows a narrow, well defined particle size distribution. This product controls the rheological properties of solvent borne and solvent free formulations, it is specifically suitable as an effective anti-settling agent. LUVOTIX® P 100-15 causes a strong non-newtonian flow profile without a significant viscosity increase. view less | |
| LUVOTIX® P 25 X | LEHVOSS Group | LUVOTIX® P 25 X is a rheological additive in paste form based on polyethylene. It is used as an anti-settling and sag-control agent in solvent based formulations. By the addition of this product a strong non-newtonian flow profile of the formulation is ob...view more LUVOTIX® P 25 X is a rheological additive in paste form based on polyethylene. It is used as an anti-settling and sag-control agent in solvent based formulations. By the addition of this product a strong non-newtonian flow profile of the formulation is obtained. view less | |
| LUVOTIX® PA 20 BA | LEHVOSS Group | LUVOTIX® PA 20 BA is a pasty rheological additive consisting of specially prepared polyamide. The paste is formulated in order to give a strong anti-sag property. This product is recommended for solvent based industrial coatings where a strong anti-sag pr...view more LUVOTIX® PA 20 BA is a pasty rheological additive consisting of specially prepared polyamide. The paste is formulated in order to give a strong anti-sag property. This product is recommended for solvent based industrial coatings where a strong anti-sag property is required. LUVOTIX® PA 20 BA shows full efficiency at low temperatures, but could also be used at higher temperatures and therefore can be applied as well as post-additive. view less | |
| LUVOTIX® PA 20 XA | LEHVOSS Group | LUVOTIX® PA 20 XA is a pasty rheological additive consisting of specially prepared polyamide. The paste is formulated in order to give a strong anti-sag property. It is recommended for solvent based industrial coatings where a strong anti-sag property is ...view more LUVOTIX® PA 20 XA is a pasty rheological additive consisting of specially prepared polyamide. The paste is formulated in order to give a strong anti-sag property. It is recommended for solvent based industrial coatings where a strong anti-sag property is required. LUVOTIX® PA 20 XA shows full efficiency at low temperatures, but could also be used at higher temperatures therfore can be applied as well as post-additive. view less |
