| BR-101 | LEHVOSS Group | Dianal BR-101 is a thermoplastic acrylic resin for use in applications of topcoats for vacuum metallized plastics. BR-101 is supplied in solid bead form and is soluble in aliphatic and alcohol solvents. | |
| BR-105 | LEHVOSS Group | Dianal BR-105 is a thermoplastic acrylic resin designed for use in weak solvents. BR-105 has a lower molecular weight than BR-101 and also shows lower viscosity. | |
| BR-106 | LEHVOSS Group | Dianal BR-106 is the workhorse resin of the BR series. It is an excellent general purpose resin with very fast solvent release. BR-106 is a n-butyl methacrylate copolymer and is supplied in the form of small, uniform beads which readily dissolve in a wide...view more Dianal BR-106 is the workhorse resin of the BR series. It is an excellent general purpose resin with very fast solvent release. BR-106 is a n-butyl methacrylate copolymer and is supplied in the form of small, uniform beads which readily dissolve in a wide range of solvents. In fact, this solid bead resin will actually cut into solvent faster than many solution acrylics at 50% total solids. BR-106 is compatible with modified polyester resins, providing an air-dry system with excellent durability, toughness, adhesion, and resistance properties. view less | |
| BR-107 | LEHVOSS Group | Dianal BR-107 is a thermoplastic acrylic resin designed for use in heat seal adhesives and coatings. BR-107 is compatible with BR-53, styrene rich acrylic resin, which can improve UV light resistance. | |
| BR-113 | LEHVOSS Group | Dianal BR-113 is a thermoplastic acrylic resin specifically designed for inks and paints. BR-113 is a harder version of BR-106 and shows better chemical resistance to alcohol solvents including gasoline. | |
| BR-115 | LEHVOSS Group | BR-115 is a thermoplastic acrylic resin and is particularly designed for compatibility with medium- and long-oil alkyd resins. When BR-115 is used to modify these alkyd resins, coatings with faster drying speed and better retention of color and gloss resu...view more BR-115 is a thermoplastic acrylic resin and is particularly designed for compatibility with medium- and long-oil alkyd resins. When BR-115 is used to modify these alkyd resins, coatings with faster drying speed and better retention of color and gloss result. BR-115 is soluble in toluene, xylene, mineral spirits, etc. BR-115 can be used as solution in mineral spirits to the above purpose. view less | |
| BR-116 | LEHVOSS Group | Dianal BR-116 is a thermoplastic acrylic resin specifically designed for inks and paints. BR-116 is a higher acid value version of BR-106 for better pigment dispersibility. | |
| BR-117 | LEHVOSS Group | Dianal BR-117 is thermoplastic acrylic resin specially designed for use in heat seal adhesives and inks. They come in the form of white, non-dusting beads. | |
| BR-121DA | LEHVOSS Group | Dianal BR-121DA acrylic resin is specifically designed to provide excellent adhesion in paints and inks on metal substrates. BR-121DA also provides excellent pigment dispersibility and weatherability. | |
| BR-201 | LEHVOSS Group | Dianal BR-201 is a thermoplastic acrylic resin designed for medium- and long-oil alkyd modifier. BR-201 is broadly compatible with many medium- and long-oil alkyds and soluble in many organic solvents such as aromatics, esters, and ketones. | |
| BR-220 | LEHVOSS Group | Dianal BR-220 offers a good combination of properties for use in flexographic inks and as a clear coating over bright metals such as silver, copper, and brass. Where some sacrifice in light resistance and gloss retention can be tolerated, BR-220 may be co...view more Dianal BR-220 offers a good combination of properties for use in flexographic inks and as a clear coating over bright metals such as silver, copper, and brass. Where some sacrifice in light resistance and gloss retention can be tolerated, BR-220 may be combined with nitrocellulose to reduce cost and promote fast solvent release for quick drying. view less | |
| BR-53 | LEHVOSS Group | Dianal BR-53 is a thermoplastic acrylic resin designed for use in wet concrete coatings. This product shows good water release performance, flexibility, and pigment dispersibility. BR-53 is primarily used as a concrete curing compound. | |
| BR-55 | LEHVOSS Group | Dianal BR-55 is a thermoplastic acrylic resin designed for use in wet concrete coatings. BR-55 has a higher molecular weight than BR-53 and also shows higher viscosity. | |
| BR-57 | LEHVOSS Group | Dianal BR-57 is a styrene/acrylic copolymer designed for the concrete marketplace with similar properties to BR-53. One major difference is in the molecular weight, with BR-57 being lower than BR-53. | |
| BR-73 | LEHVOSS Group | Dianal BR-73 is a thermoplastic acrylic resin designed for use in applications of PVC coatings or PVC leather processing. This product shows good performance in plasticizer barrier properties. BR-73 is useful in wallpaper coatings and automotive refinish ...view more Dianal BR-73 is a thermoplastic acrylic resin designed for use in applications of PVC coatings or PVC leather processing. This product shows good performance in plasticizer barrier properties. BR-73 is useful in wallpaper coatings and automotive refinish coatings. view less | |
| BR-78 | LEHVOSS Group | Dianal BR-78 is a thermoplastic acrylic resin designed for use as a low profile additive for SMC. BR-78 has balanced properties for and is the core product of this field. | |
| BR-80 | LEHVOSS Group | Dianal BR-80 is a thermoplastic acrylic resin designed for use in PVC coatings or overprint varnishes. BR-80 is a lower acid grade of BR-73. This lower solid acid value improves water and weather resistance. | |
| BR-85 | LEHVOSS Group | Dianal BR-85 is a thermoplastic acrylic resin designed for use in PVC coatings. BR-85 shows outstanding hardness, toughness, and chemical resistance. | |
| BR-87 | LEHVOSS Group | Dianal BR-87 is a thermoplastic acrylic resin designed for use in inks. BR-87 is a very hard resin with good pigment dispersibility. BR-87 can be used as a modifier resin to improve hardness. | |
| BR-88 | LEHVOSS Group | BR-88 is the hardest of our BR grades and has the highest molecular weight. It is tough and has excellent durability. | |
| BR-90 | LEHVOSS Group | Dianal BR-90 is a thermoplastic acrylic resin designed for use in inks and coatings. BR-90 shows wide compatibility to various types of resins and can be used as a modifier. | |
| DM® 120 | LEHVOSS Group | DM® 120 is a 100% nonvolatile, epoxy acrylate resin. It provides solvent resistance, high gloss, improved flexibility and good adhesion. It is a clear liquid with characteristics of light color and low shrinkage. DM® 120 can be used in overprinting varnis...view more DM® 120 is a 100% nonvolatile, epoxy acrylate resin. It provides solvent resistance, high gloss, improved flexibility and good adhesion. It is a clear liquid with characteristics of light color and low shrinkage. DM® 120 can be used in overprinting varnishes, coating for paper and plastics, lithographic and screen ink vehicles, as well as metal decorating vehicles. view less | |
| DM® 186 | LEHVOSS Group | DM® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment wetting, le...view more DM® 186 is a soya oil epoxidized acrylate oligomer. This resin is characterized by fast cure, excellent flow and leveling. It could be as a minor component or as an additive used in clear or pigmented UV/EB coatings for improving their pigment wetting, leveling, and adhesion. DM® 186 is recommended for use in overprint varnishes, clear coatings for paper, wood top coats with smooth surface, ink binders with good wetting property, and adhesives. view less | |
| DM® 541 | LEHVOSS Group | DM® 541 is an aliphatic urethane acrylate oligomer, characterized by its good abrasion resistance and good adhesion. The excellent non-yellowing property is similar to a typical aliphatic urethane resin. It also has good elasticity and flexibility along w...view more DM® 541 is an aliphatic urethane acrylate oligomer, characterized by its good abrasion resistance and good adhesion. The excellent non-yellowing property is similar to a typical aliphatic urethane resin. It also has good elasticity and flexibility along with fast cure times and good weathering ability performance. This product is recommended for use in UV inks, UV cured adhesives, coatings for wood and plastics requiring exterior durability, as well as overprinting varnishes for paper and board. view less | |
| DM® 584 | LEHVOSS Group | DM® 584 is an aliphatic urethane acrylate oligomer diluted with 12% 1,6-hexanediol diacrylate (HDDA) monomer. Films cured of this product by ultraviolet light (UV) or electron beam (EB) systems impart excellent exterior durability, flexibility, toughness,...view more DM® 584 is an aliphatic urethane acrylate oligomer diluted with 12% 1,6-hexanediol diacrylate (HDDA) monomer. Films cured of this product by ultraviolet light (UV) or electron beam (EB) systems impart excellent exterior durability, flexibility, toughness, and the non-yellowing properties similar to a typical aliphatic urethane. DM® 584 is recommended for use in coatings for wood and plastic requiring exterior durability, pigment coatings for wood, metal coating, and clear coatings for cork. view less | |
| DM® 88A | LEHVOSS Group | DM® 88A is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of this product, exhibits excellent hardness, high gloss, and solvent resistance. This p...view more DM® 88A is a hexafunctional aromatic urethane acrylate oligomer which provides very fast cure response to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of this product, exhibits excellent hardness, high gloss, and solvent resistance. This product is recommended for use in wood coatings and fillers, lithographic inks, as well as improved cured speed, solvent resistance, and gloss. view less | |
| DOUBLEMER® 530 | LEHVOSS Group | DOUBLEMER® 530 is an aliphatic urethane diacrylate resin, characterized by its light color and low viscosity. Films cured by this product via exposure to ultraviolet light (UV) or electric beam (EB) are soft, flexible exhibiting the inherent non-yellow pr...view more DOUBLEMER® 530 is an aliphatic urethane diacrylate resin, characterized by its light color and low viscosity. Films cured by this product via exposure to ultraviolet light (UV) or electric beam (EB) are soft, flexible exhibiting the inherent non-yellow properties similar to a typical aliphatic urethane acrylate. It is most often used an additive to improve the flexibility of finished formulations. view less | |
| DOUBLEMER® 87A | LEHVOSS Group | DOUBLEMER® 87A is a hexafunctional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of this product exhibit excellent hardness and solvent resistance w...view more DOUBLEMER® 87A is a hexafunctional aliphatic urethane acrylate oligomer which provides very fast cure response when exposed to Ultraviolet Light (UV) or an Electron Beam (EB). Cured films of this product exhibit excellent hardness and solvent resistance without yellowing. It is characterized by its light color, as well as its excellent film toughness, film hardness, and fast cure response. view less | |
| ESACOTE CN 24 | LEHVOSS Group | ESACOTE CN 24 is an opalescent liquid, waterborne polyether based cationic aliphatic polyurethane dispersion, that forms a soft, elastic, and slightly sticky film. This product is solvent and formaldehyde free and therefore is characterized by a low envir...view more ESACOTE CN 24 is an opalescent liquid, waterborne polyether based cationic aliphatic polyurethane dispersion, that forms a soft, elastic, and slightly sticky film. This product is solvent and formaldehyde free and therefore is characterized by a low environmental impact. view less | |
| ESACOTE MD 15 | LEHVOSS Group | ESACOTE MD 15 is an opalescent liquid, waterborne cationic polyurethane dispersion, that forms an elastic film for the metal and the wood coatings. This product is solvent and formaldehyde free and therefore is characterized by a low environmental impact. | |
| ESACOTE MD 23 | LEHVOSS Group | ESACOTE MD 23 is a waterborne dispersion of a cationic modified polymer, which can be used for the stain and tannin blocking primers application. This product is solvent and formaldehyde free and therefore is characterized by a low environmental impact. | |
| ESACOTE PAD | LEHVOSS Group | ESACOTE PAD is a white liquid, aliphatic polyurethane waterborne dispersion based on polyether polyols, which is specifically designed for padding application for outwear, sportswear, and fashion where a full, elastic, and non sticky touch modification is...view more ESACOTE PAD is a white liquid, aliphatic polyurethane waterborne dispersion based on polyether polyols, which is specifically designed for padding application for outwear, sportswear, and fashion where a full, elastic, and non sticky touch modification is required. This product has excellent washing and dry cleaning fastness and can be also suitable for coating and printing applications. view less | |
| ESACOTE PU 13 | LEHVOSS Group | ESACOTE PU 13 is a milky white liquid, water-borne polyurethane acrylic copolymer, based on polyether and aliphatic isocyanates and solvent free. This product gives origin to film with good flexibility and hardness. It is suitable for interior wood coatin...view more ESACOTE PU 13 is a milky white liquid, water-borne polyurethane acrylic copolymer, based on polyether and aliphatic isocyanates and solvent free. This product gives origin to film with good flexibility and hardness. It is suitable for interior wood coatings, alone or in combination with acrylic dispersions. The chemical resistance can be improved by crosslinking with polyaziridine adduct like CATALYST AT5/N. view less | |
| ESACOTE PU 143 | LEHVOSS Group | ESACOTE PU 143 is a solvent free water-borne polyurethane acrylic copolymer, based on polyether and aliphatic isocyanates, which gives a film with a good flexibility and hardness. It is suitable for interior wood coatings, alone or in combination with acr...view more ESACOTE PU 143 is a solvent free water-borne polyurethane acrylic copolymer, based on polyether and aliphatic isocyanates, which gives a film with a good flexibility and hardness. It is suitable for interior wood coatings, alone or in combination with acrylic dispersions. The chemical resistance can be improved by crosslinking with an isocyanate like Crosslinker 08 or with polyaziridine adduct like CATALYST AT5/N. view less | |
| ESACOTE PU 147 | LEHVOSS Group | ESACOTE PU 147 is a waterborne polyurethane-acrylic copolymer dispersion based on aliphatic isocyanates and polyether diols, surfactants free. It is able to form transparent and tough films, with high gloss level and chemical resistance. It shows good adh...view more ESACOTE PU 147 is a waterborne polyurethane-acrylic copolymer dispersion based on aliphatic isocyanates and polyether diols, surfactants free. It is able to form transparent and tough films, with high gloss level and chemical resistance. It shows good adhesion on wood, polyester primers, glass and metal; however, it is not suitable for products/applications requiring direct adhesion on plastics. ESACOTE PU 147 is then particularly suitable for wood coating, wood flooring, and metal coating, where excellent chemical resistance, adhesion, and transparency are required. view less | |
| ESACOTE PU 150 | LEHVOSS Group | ESACOTE PU 150 is a water based polyurethane-acrylic copolymer based on aromatic/aliphatic isocyanates. It has a good balance of adhesion, hardness, flexibility and water resistance. In combination with acrylic dispersions, this product improves sandabili...view more ESACOTE PU 150 is a water based polyurethane-acrylic copolymer based on aromatic/aliphatic isocyanates. It has a good balance of adhesion, hardness, flexibility and water resistance. In combination with acrylic dispersions, this product improves sandability and blocking resistance. Suitable fields of application are wood varnishes for general industry, economic flooring varnishes, reinforcement of acrylic resins for various applications. ESACOTE PU 150 can be used alone or in combination with other polyurethane dispersions and/or with acrylic resins. view less | |
| ESACOTE PU 16 | LEHVOSS Group | ESACOTE PU 16 is a water-borne aliphatic PU dispersion based on polyether, with a good balance between hardness, flexibility, toughness, adhesion, and water resistance. The product has a good adhesion on different substrates like wood, plastic, and metal ...view more ESACOTE PU 16 is a water-borne aliphatic PU dispersion based on polyether, with a good balance between hardness, flexibility, toughness, adhesion, and water resistance. The product has a good adhesion on different substrates like wood, plastic, and metal and is easily compatible with the other ESACOTE dispersions. view less | |
| ESACOTE PU 180 | LEHVOSS Group | ESACOTE PU 180 is an opalescent liquid, waterborne aliphatic PU dispersion based on polyether, which gives a rubbery and flexible film with good chemical, water, and high blocking resistance. It is recommended as flexibiliser for acrylic resins, both for ...view more ESACOTE PU 180 is an opalescent liquid, waterborne aliphatic PU dispersion based on polyether, which gives a rubbery and flexible film with good chemical, water, and high blocking resistance. It is recommended as flexibiliser for acrylic resins, both for interior than exterior application. view less | |
| ESACOTE PU 186 | LEHVOSS Group | ESACOTE PU 186 is an opalescent liquid solvent free waterborne aliphatic PU dispersion based on polyether poliols, which gives a flexible and rubbery film. It is recommended as filming aid and flexibiliser for acrylic resins, for Joinery applications. | |
| ESACOTE PU 39 | LEHVOSS Group | ESACOTE PU 39 is a waterborne aliphatic polyurethane dispersion polyester based, which forms very flexible and glossy film with outstanding water resistance at room temperature. It is resistant to plasticizers migration and can be used for clear or pigmen...view more ESACOTE PU 39 is a waterborne aliphatic polyurethane dispersion polyester based, which forms very flexible and glossy film with outstanding water resistance at room temperature. It is resistant to plasticizers migration and can be used for clear or pigmented coatings with excellent adhesion on rigid and flexible PVC. The ESACOTE PU 39 solvent and chemical resistance can be improved by crosslinking with 2-3% of Catalyst AT5/N, or with water dispersible isocyanates like CROSSLINKER 08. Thanks to the good compatibility it can be used in combination with waterborne ureic and melamine resins to improve elongation and brightness of the coloring. view less | |
| ESACOTE PU 40 | LEHVOSS Group | ESACOTE PU 40 is a solvent free waterborne aliphatic polyurethane dispersion polyester based, which forms very flexible and glossy film with outstanding weathering resistance. In order to improve specific behaviours, this product can be further crosslinke...view more ESACOTE PU 40 is a solvent free waterborne aliphatic polyurethane dispersion polyester based, which forms very flexible and glossy film with outstanding weathering resistance. In order to improve specific behaviours, this product can be further crosslinked with water dispersible isocyanates like CROSSLINKER 08, or with polyaziridines like Catalyst AT5/N. view less | |
| ESACOTE PU 41 | LEHVOSS Group | ESACOTE PU 41 is a waterborne aliphatic polyurethane dispersion polyester based, solvent free, which forms very hard film with good chemical and mechanical resistance. This product is particularly suitable for wood interior formulations in combination wit...view more ESACOTE PU 41 is a waterborne aliphatic polyurethane dispersion polyester based, solvent free, which forms very hard film with good chemical and mechanical resistance. This product is particularly suitable for wood interior formulations in combination with acrylic binders to improve wood wetting and blocking resistance. For a proper film formation, it is necessary the addition of 10-20% of a coalescent on solids content. view less | |
| ESACOTE PU 55 | LEHVOSS Group | ESACOTE PU 55 is a waterborne dispersion of an aliphatic polyurethane based on polyether, which gives a tough and flexible film with good chemical and water resistance combined with high blocking resistance. This product is suitable for wood coating both ...view more ESACOTE PU 55 is a waterborne dispersion of an aliphatic polyurethane based on polyether, which gives a tough and flexible film with good chemical and water resistance combined with high blocking resistance. This product is suitable for wood coating both for interior and exterior applications, especially in combination with acrylic resins to improve their flexibility. view less | |
| ESACOTE PU 61 | LEHVOSS Group | ESACOTE PU 61 is a waterborne aliphatic polyurethane based on polycarbonate, which if used alone or in combination with acrylic emulsions could improve hardness, toughness and the chemical resistance of the varnish. This product can be used in combination...view more ESACOTE PU 61 is a waterborne aliphatic polyurethane based on polycarbonate, which if used alone or in combination with acrylic emulsions could improve hardness, toughness and the chemical resistance of the varnish. This product can be used in combination with waterborne melamine resins in oven drying formulations with excellent adhesion, and good resistance to water, detergents, and stain (PVC flooring applications). view less | |
| ESACOTE PU 620 | LEHVOSS Group | ESACOTE PU 620 is a translucent liquid, aqueous dispersion of a film-forming anionic polycarbonate-based aliphatic polyurethane polymer. It is easily dispersible in cold demineralized water. The film that is developed is transparent and medium-rigid. | |
| ESACOTE PU 71 | LEHVOSS Group | ESACOTE PU 71 is a waterborne dispersion of an aliphatic polyurethane based on polycarbonate diols, which is able to form hard and transparent films with excellent resistance to yellowing. This product is suitable for wood flooring, also in combination wi...view more ESACOTE PU 71 is a waterborne dispersion of an aliphatic polyurethane based on polycarbonate diols, which is able to form hard and transparent films with excellent resistance to yellowing. This product is suitable for wood flooring, also in combination with acrylic resins, as well as topcoat for epoxy flooring. It can be used in metal coating applications. When combined with acrylic resins, ESACOTE PU 71 is suitable to improve film body, hardness, toughness, and chemical resistance. view less | |
| ESACOTE PU 71 | LEHVOSS Group | ESACOTE PU 71 is a waterborne dispersion of an aliphatic polyurethane based on polycarbonate diols, which is able to form hard and transparent films with excellent resistance to yellowing. This product is suitable for wood flooring, also in combination wi...view more ESACOTE PU 71 is a waterborne dispersion of an aliphatic polyurethane based on polycarbonate diols, which is able to form hard and transparent films with excellent resistance to yellowing. This product is suitable for wood flooring, also in combination with acrylic resins, as well as topcoat for epoxy flooring. It can be used also in metal coating applications, and when combined with acrylic resins, it is suitable to improve film body, hardness, toughness and chemical resistance. view less | |
| ESACOTE PU 73 | LEHVOSS Group | ESACOTE PU 73 is a waterborne dispersion of an aliphatic polyurethane based on polycarbonate diols. It is able to form hard and transparent films with excellent resistance to yellowing. This product is suitable for wood flooring, also in combination with ...view more ESACOTE PU 73 is a waterborne dispersion of an aliphatic polyurethane based on polycarbonate diols. It is able to form hard and transparent films with excellent resistance to yellowing. This product is suitable for wood flooring, also in combination with acrylic resins, as well as a topcoat for epoxy flooring. ESACOTE PU 73 can be used also in metal coating applications. When combined with acrylic resins, it is suitable to improve film body, hardness, toughness and chemical resistance. view less | |
| ESACOTE PU 77 | LEHVOSS Group | ESACOTE PU 77 is a solvent free water-borne dispersion of an aliphatic polyurethane based on polycarbonate diols, which gives hard and transparent coatings with excellent water resistance, gloss retention, and resistance to yellowing. In combination with ...view more ESACOTE PU 77 is a solvent free water-borne dispersion of an aliphatic polyurethane based on polycarbonate diols, which gives hard and transparent coatings with excellent water resistance, gloss retention, and resistance to yellowing. In combination with water dispersible polyisocyanates, ESACOTE PU 77 gives high quality coatings for the wood industry and the parquet flooring. view less | |
| ESACOTE PU 78 | LEHVOSS Group | ESACOTE PU 78 is an opalescent liquid water-borne aliphatic PU dispersion, which gives a very elastic film for the flexible coating applications on different substrates as for the automotive interior application. If required, it is possible to enhance the...view more ESACOTE PU 78 is an opalescent liquid water-borne aliphatic PU dispersion, which gives a very elastic film for the flexible coating applications on different substrates as for the automotive interior application. If required, it is possible to enhance the adhesion and the chemical resistance by simply adding polyaziridine or water dispersible polyisocyanates. view less | |
| ESACOTE PU 78/N | LEHVOSS Group | ESACOTE PU 78/N is a milky liquid, water-borne aliphatic PU dispersion, which gives a very elastic film for the flexible coating applications on different substrates. If required, it is possible to enhance the adhesion and the chemical resistance by simpl...view more ESACOTE PU 78/N is a milky liquid, water-borne aliphatic PU dispersion, which gives a very elastic film for the flexible coating applications on different substrates. If required, it is possible to enhance the adhesion and the chemical resistance by simply adding polyaziridine or water dispersible polyisocyanates. view less | |
| ESACOTE PU 811 | LEHVOSS Group | ESACOTE PU 811 is a milky liquid, waterborne aliphatic, hydroxylated, acrylic-PU dispersion, which is suitable to formulate waterborne, 2-component industrial coatings, high gloss varnishes and topcoats, with excellent body and hardness. Due to its medium...view more ESACOTE PU 811 is a milky liquid, waterborne aliphatic, hydroxylated, acrylic-PU dispersion, which is suitable to formulate waterborne, 2-component industrial coatings, high gloss varnishes and topcoats, with excellent body and hardness. Due to its medium-low reactivity we advise a forced drying, in order to speed up curing rate and hardness development. view less | |
| ESACOTE PU 813 | LEHVOSS Group | ESACOTE PU 813 is a waterborne, ready-to-use formulation for the Glass Coatings market, which forms glossy and hard film. If crosslinked with Crosslinker PU, it shows a very good adhesion on different substrates and an excellent water resistance. The prod...view more ESACOTE PU 813 is a waterborne, ready-to-use formulation for the Glass Coatings market, which forms glossy and hard film. If crosslinked with Crosslinker PU, it shows a very good adhesion on different substrates and an excellent water resistance. The product works also at room temperature (at least above 15°C), but if cured in tunnel or air forced chambers at 50-90°C it performs better in terms of hardness and film formation. view less | |
| ESACOTE PU 85 | LEHVOSS Group | ESACOTE PU 85 is a waterborne dispersion of an aliphatic polyurethane based on polyester dyols, which is able to form tough and glossy coatings with good adhesion and outstanding chemical resistance to water solutions of alkali and acid. It is a polymer w...view more ESACOTE PU 85 is a waterborne dispersion of an aliphatic polyurethane based on polyester dyols, which is able to form tough and glossy coatings with good adhesion and outstanding chemical resistance to water solutions of alkali and acid. It is a polymer with good adhesion and chemical resistance, suitable for the coating of several substrates, including metals (aluminium), plastic, and wood mainly for interior application. It can be used alone or formulated in combination with acrylic resins, to improve film body, hardness, toughness and chemical resistance. view less | |
| ESACOTE PU 921 | LEHVOSS Group | ESACOTE PU 921 is a slightly opalescent, waterborne aliphatic polyurethane dispersion, which forms medium glassy film, with realising properties (tapes applications). The product has been developed for non-adhesives uses and shows a good release property ...view more ESACOTE PU 921 is a slightly opalescent, waterborne aliphatic polyurethane dispersion, which forms medium glassy film, with realising properties (tapes applications). The product has been developed for non-adhesives uses and shows a good release property if combined with rubber based acrylics and hot-melt adhesives. It has very good adhesion on polyester and polyolefin corona treated. view less | |
| ESACOTE PU 931 | LEHVOSS Group | ESACOTE PU 931 is an opalescent liquid, non ionic waterborne aliphatic polyurethane dispersion, polyether based, which gives a rubbery, flexible film with good chemical resistance. For specific behaviours, ESACOTE PU 931 can be further crosslinked with wa...view more ESACOTE PU 931 is an opalescent liquid, non ionic waterborne aliphatic polyurethane dispersion, polyether based, which gives a rubbery, flexible film with good chemical resistance. For specific behaviours, ESACOTE PU 931 can be further crosslinked with water dispersible isocyanates like CROSSLINKER 08, or with polyaziridines like Catalyst AT5/N. view less | |
| ESACOTE PU 980 | LEHVOSS Group | ESACOTE PU 980 is a solvent free waterborne polyurethane dispersion based on aliphatic isocyanates and polyether diols. The product is particularly suitable for top-coat, having a low gloss, free from silica matting agents, with a remarkable soft-feel eff...view more ESACOTE PU 980 is a solvent free waterborne polyurethane dispersion based on aliphatic isocyanates and polyether diols. The product is particularly suitable for top-coat, having a low gloss, free from silica matting agents, with a remarkable soft-feel effect and high resistance to burnishing. This product is suitable for wood and plastic coating, where soft-feel effect and low gloss are required and can be used alone or in combination with other polyurethane dispersions and/or with acrylic resins. view less | |
| ESACOTE PU 980/N | LEHVOSS Group | ESACOTE PU 980/N is a solvent free waterborne polyurethane dispersion based on aliphatic isocyanates and polyether diols. The product is particularly suitable for low gloss top-coat, free from silica matting agents, witha remarkable soft-feel effect. This...view more ESACOTE PU 980/N is a solvent free waterborne polyurethane dispersion based on aliphatic isocyanates and polyether diols. The product is particularly suitable for low gloss top-coat, free from silica matting agents, witha remarkable soft-feel effect. This product is suitable for wood and plastic coating, where soft-feel effect and low gloss are required and can be used alone or in combination with other polyurethane dispersions and/or with acrylic resins. view less | |
| ESACOTE ST 47 | LEHVOSS Group | ESACOTE ST 47 is a water-borne polyurethane dispersion, based on polyether and aliphatic isocyanates. Its film is transparent, non sticky, very flexible, soft and rubber like. It is recommended for textile application, and for the formulation of coatings ...view more ESACOTE ST 47 is a water-borne polyurethane dispersion, based on polyether and aliphatic isocyanates. Its film is transparent, non sticky, very flexible, soft and rubber like. It is recommended for textile application, and for the formulation of coatings with a “soft touch” effect, alone or in combination with acrylic dispersions. A matt film can be obtained adding wax dispersions, silicas, polyurea based matting agents, or combination of them. view less | |
| ESACOTE UR 115 | LEHVOSS Group | ESACOTE UR 115 is a waterborne dispersion of an aliphatic polyurethane modified by fatty acids, surfactants free, which forms very hard and tough films with high degree of gloss and transparency. It is particularly suitable for wood coating, where good ch...view more ESACOTE UR 115 is a waterborne dispersion of an aliphatic polyurethane modified by fatty acids, surfactants free, which forms very hard and tough films with high degree of gloss and transparency. It is particularly suitable for wood coating, where good chemical resistance, adhesion, and aesthetics issues are required and can be used alone or in combination with acrylic resins. It is however recommended to verify the compatibility of this product with other resins/additives prior to use. view less | |
| ESACOTE UR 116 | LEHVOSS Group | ESACOTE UR 116 is a waterborne dispersion of an aliphatic polyurethane modified by fatty acids, surfactants free, which forms very hard and tough films with high degree of gloss and transparency. It is particularly suitable for wood coating, where good ch...view more ESACOTE UR 116 is a waterborne dispersion of an aliphatic polyurethane modified by fatty acids, surfactants free, which forms very hard and tough films with high degree of gloss and transparency. It is particularly suitable for wood coating, where good chemical resistance, adhesion and aesthetics issues are required and it can also be used only in combination with acrylic resins, having a MFFT not exceeding 30-35°C. view less | |
| MB-2519 | LEHVOSS Group | MB-2519 is an acrylic polymer designed for use as a low profile modifier in the production of SMC and BMC plastics. | |
| MB-2543 | LEHVOSS Group | Dianal MB-2543 is the workhorse resin of the MB series. It is an excellent general-purpose resin with very fast solvent release. This product is a n-butyl methacrylate copolymer and is supplied in the form of small, uniform beads which readily dissolve in...view more Dianal MB-2543 is the workhorse resin of the MB series. It is an excellent general-purpose resin with very fast solvent release. This product is a n-butyl methacrylate copolymer and is supplied in the form of small, uniform beads which readily dissolve in a wide range of solvents. MB-2543 is a lower Tg version of BR-106, and is designed to provide higher solids formulations. view less | |
| MB-2588 | LEHVOSS Group | Dianal MB-2588 is a thermoplastic acrylic resin designed for use in the paint and coatings, inks, and adhesive markets. MB-2588 is a modified version of Dianal resin BR-106 with increased adhesion and toughness. | |
| MB-2594 | LEHVOSS Group | Dianal MB-2594 is designed to provide good pigment dispersibility and compatibility with long oil alkyds. This product can also be dissolved in Cellosolve Actate and Xylene for clear coat application. It can be mixed in a 1:3 ratio with MB-2595 for use in...view more Dianal MB-2594 is designed to provide good pigment dispersibility and compatibility with long oil alkyds. This product can also be dissolved in Cellosolve Actate and Xylene for clear coat application. It can be mixed in a 1:3 ratio with MB-2595 for use in carbon black. view less | |
| MB-2595 | LEHVOSS Group | Dianal MB-2595 is designed to provide good pigment dispersibility and compatibility with long oil alkyds. MB-2595 can be mixed in a 3:1 ratio with MB-2594 for use in carbon black. | |
| MB-2660 | LEHVOSS Group | Dianal MB-2660 is an acrylic copolymer resin with an excellent balance of toughness and flexibility. Films from this resin also offer excellent alcohol resistance. | |
| MB-2678 | LEHVOSS Group | Dianal MB-2678 can be used for paper coating, interior coatings, and ink applicatons. It is a vinyl acrlic resin that has good solubility in Rule 66 type mineral spirit such as (Shell Chemical 145EC) which has a low K.B. value of 30. The K.B. value indica...view more Dianal MB-2678 can be used for paper coating, interior coatings, and ink applicatons. It is a vinyl acrlic resin that has good solubility in Rule 66 type mineral spirit such as (Shell Chemical 145EC) which has a low K.B. value of 30. The K.B. value indicates the solubility performance of each solvent. The higher the K.B. value the better the solubility i.e. mineral spirits = 30 and Toluene = 105. view less | |
| MB-2752 | LEHVOSS Group | MB-2752 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) ...view more MB-2752 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) of 86mgKOH/g. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| MB-2766 | LEHVOSS Group | Dianal MB-2766 is a thermoplastic acrylic resin specifically designed for adhesives and inks. MB-2766 is the softest but toughest grade of the BR series, which can be used as a modifier of other resins to improve flexibility or toughness. | |
| MB-2777 | LEHVOSS Group | Dianal MB-2777 is a thermoplastic acrylic resin specifically designed for application to bare steel and polished aluminum in clear and pigmented coatings. | |
| MB-2823 | LEHVOSS Group | Dianal MB-2823 is a thermoplastic acrylic resin designed for short-oil alkyd modifier. This product is broadly compatible with many short-oil alkyds and soluble in many organic solvents such as aromatics, esters, and ketones. | |
| MB-2876 | LEHVOSS Group | MB-2876 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the lower hydroxyl content group with the solid hydroxyl value (OHV) o...view more MB-2876 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the lower hydroxyl content group with the solid hydroxyl value (OHV) of 8mgKOH/g. The lower hydroxyl resins are ideal for formulating reactive hot melt adhesives. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| MB-2935 | LEHVOSS Group | MB-2935 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the lower hydroxyl content group with the solid hydroxyl value (OHV) o...view more MB-2935 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the lower hydroxyl content group with the solid hydroxyl value (OHV) of 8mgKOH/g. The lower hydroxyl resins are ideal for formulating reactive hot melt adhesives. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| MB-2945 | LEHVOSS Group | MB-2945 is an acrylic copolymer designed for clear coatings for functional paper coating applications. | |
| MB-2952 | LEHVOSS Group | MB-2952 is thermoplastic acrylic resin designed for plastic coatings. This product are white, non dusting beads that offer alcohol and abrasion resistance. It is suitable for coatings on PS. ABS substrates. | |
| MB-2960 | LEHVOSS Group | MB-2960 is an acrylic copolymer designed for clear coatings for functional paper coating applications. | |
| MB-2975 | LEHVOSS Group | Dianal MB-2975 is the workhorse resin of the MB series. It is an excellent general-purpose resin with very fast solvent release. It is a n-butyl methacrylate copolymer and is supplied in the form of small, uniform beads which readily dissolve in a wide ra...view more Dianal MB-2975 is the workhorse resin of the MB series. It is an excellent general-purpose resin with very fast solvent release. It is a n-butyl methacrylate copolymer and is supplied in the form of small, uniform beads which readily dissolve in a wide range of solvents. MB-2975 is a lower Tg version of BR-106, and is designed to provide higher solids formulations. view less | |
| MB-2998 | LEHVOSS Group | MB-2998 is an acrylic copolymer designed for clear coatings for functional paper coating applications. | |
| MB-3068 | LEHVOSS Group | MB-3068 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the lower hydroxyl content group with the solid hydroxyl value (OHV) o...view more MB-3068 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the lower hydroxyl content group with the solid hydroxyl value (OHV) of 8mgKOH/g. The lower hydroxyl resins are ideal for formulating reactive hot melt adhesives. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| MB-7301 | LEHVOSS Group | Dianal MB-7301 is a part of a new series of epoxy functionalized thermoplastic acrylic bead resins developed by Dianal America, Inc., and its parent company, Mitsubishi Rayon Co., Ltd. This product has been developed with an epoxy equivalent weight (EEW) ...view more Dianal MB-7301 is a part of a new series of epoxy functionalized thermoplastic acrylic bead resins developed by Dianal America, Inc., and its parent company, Mitsubishi Rayon Co., Ltd. This product has been developed with an epoxy equivalent weight (EEW) of 142 and can be used as a pigment dispersant, as well as an adhesion promoter for metals and glass. It is auto cross-linkable and offers a wide range of resin formulating capability to incorporate additional functional groups of Tg and molecular weight variations. view less | |
| MB-7302 | LEHVOSS Group | Dianal MB-7302 is a part of a new series of epoxy functionalized thermoplastic acrylic bead resins developed by Dianal America, Inc., and its parent company, Mitsubishi Rayon Co., Ltd. This product has been developed with an epoxy equivalent weight (EEW) ...view more Dianal MB-7302 is a part of a new series of epoxy functionalized thermoplastic acrylic bead resins developed by Dianal America, Inc., and its parent company, Mitsubishi Rayon Co., Ltd. This product has been developed with an epoxy equivalent weight (EEW) of 720 and can be used as a pigment dispersant, as well as an adhesion promoter for metals and glass. It is auto cross-linkable and offers a wide range of resin formulating capability to incorporate additional functional groups of Tg and molecular weight variations. view less | |
| MB-7303 | LEHVOSS Group | Dianal MB-7303 is a part of a new series of epoxy functionalized thermoplastic acrylic bead resins developed by Dianal America, Inc., and its parent company, Mitsubishi Rayon Co., Ltd. This product has been developed with an epoxy equivalent weight (EEW) ...view more Dianal MB-7303 is a part of a new series of epoxy functionalized thermoplastic acrylic bead resins developed by Dianal America, Inc., and its parent company, Mitsubishi Rayon Co., Ltd. This product has been developed with an epoxy equivalent weight (EEW) of 2,150 and can be used as a pigment dispersant, as well as an adhesion promoter for metals and glass. It is auto cross-linkable and offers a wide range of resin formulating capability to incorporate additional functional groups of Tg and molecular weight variations. view less | |
| PB-657 | LEHVOSS Group | Dianal PB-657 is a part of a new series of epoxy functionalized thermoplastic acrylic bead resins developed by Dianal America, Inc., and its parent company, Mitsubishi Rayon Co., Ltd. This product has been developed with an epoxy equivalent weight (EEW) o...view more Dianal PB-657 is a part of a new series of epoxy functionalized thermoplastic acrylic bead resins developed by Dianal America, Inc., and its parent company, Mitsubishi Rayon Co., Ltd. This product has been developed with an epoxy equivalent weight (EEW) of 2,150 and can be used as a pigment dispersant, as well as an adhesion promoter for metals and glass. It is auto cross-linkable and offers a wide range of resin formulating capability to incorporate additional functional groups of Tg and molecular weight variations. view less | |
| TB-092 | LEHVOSS Group | Dianal TB-092 is one of two resins that is an improved version of MB-7287RD, a flow additive which did not contain silica and had severe cratering. TB-092 and TB-093 improve performance properties and compatibility versus existing flow additives. TB-092 h...view more Dianal TB-092 is one of two resins that is an improved version of MB-7287RD, a flow additive which did not contain silica and had severe cratering. TB-092 and TB-093 improve performance properties and compatibility versus existing flow additives. TB-092 has very few craters and offers better gloss and overall compatibility. view less | |
| TB-093 | LEHVOSS Group | Dianal TB-093 is one of two resins that is an improved version of MB-7287RD, a flow additive which did not contain silica and had severe cratering. TB-093 and TB-092 improve performance properties and compatibility versus existing flow additives. TB-093 h...view more Dianal TB-093 is one of two resins that is an improved version of MB-7287RD, a flow additive which did not contain silica and had severe cratering. TB-093 and TB-092 improve performance properties and compatibility versus existing flow additives. TB-093 has some craters and offers the best flow. view less | |
| TB-167 | LEHVOSS Group | TB-167 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) o...view more TB-167 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) of 45mgKOH/g. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| TB-173 | LEHVOSS Group | TB-173 is an unique solid acrylic bead resin with hydroxyl (OH) functionality in response to legislative changes reducing the allowable VOC (volatile organic content) in automotive refinish and other coatings. This resin is supplied as a solid bead, which...view more TB-173 is an unique solid acrylic bead resin with hydroxyl (OH) functionality in response to legislative changes reducing the allowable VOC (volatile organic content) in automotive refinish and other coatings. This resin is supplied as a solid bead, which offers formulators maximum freedom to choose optimal solvent systems. It can be used with exempt solvents such as acetone, t-butyl acetate, or OXSOL. This product reacts with isocyanate crosslinkers for ambient cure PU applications, improves intercoat and topcoat adhesion, and is easy to store and handle with no solvent fire hazards. view less | |
| TB-173 | LEHVOSS Group | TB-173 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) o...view more TB-173 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) of 86mgKOH/g. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| TB-177 | LEHVOSS Group | TB-177 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the higher hydroxyl content group with the solid hydroxyl value (OHV) o...view more TB-177 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the higher hydroxyl content group with the solid hydroxyl value (OHV) of 180mgKOH/g. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| TB-179 | LEHVOSS Group | TB-179 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the higher hydroxyl content group with the solid hydroxyl value (OHV) o...view more TB-179 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the higher hydroxyl content group with the solid hydroxyl value (OHV) of 130mgKOH/g. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| TB-180 | LEHVOSS Group | TB-180 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) o...view more TB-180 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) of 86mgKOH/g. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| TB-197 | LEHVOSS Group | TB-197 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) o...view more TB-197 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) of 53mgKOH/g. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| TB-199 | LEHVOSS Group | TB-199 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) o...view more TB-199 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the medium hydroxyl content group with the solid hydroxyl value (OHV) of 86mgKOH/g. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less | |
| TB-202 | LEHVOSS Group | TB-202 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the lower hydroxyl content group with the solid hydroxyl value (OHV) of...view more TB-202 is part of a Dianal America developed series of unique acrylic bead resin that contains hydroxyl (OH) groups. The series can be split into three groups. This product is part of the lower hydroxyl content group with the solid hydroxyl value (OHV) of 4mgKOH/g. The lower hydroxyl resins are ideal for formulating reactive hot melt adhesives. This resin is supplied in solid bead form, which offers formulators maximum freedom to choose an optimal solvent system for their requirements. It is reactive with isocyanate crosslinkers for ambient cure systems, and with melamines for use in baking systems. view less |
