| ANTI-TERRA®-204 | BYK | ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primer...view more ANTI-TERRA®-204 is a solution of a polycarboxylic acid salt of polyamine amides. In comparison to ANTI-TERRA-203, ANTI-TERRA-204 can additionally be used in non-polar systems and is compatible with white spirits. The lower the polarity the more the thixotropy is increased. The preferred binders are long, medium and short oil alkyds, PVC-copolymers, chlorinated rubber and epoxy. Even in "low-filled“ systems, the sagging tendency is reduced; in addition, no negative influence on the water sensitivity of the paint film has been observed. When formulated into anticorrosion primers, the protective properties are enhanced in many instances. view less | |
| DSX® 1516 | BASF Formulation Additives | DSX® 1516 is a non-ionic medium pseudoplastic rheology modifier for water-based coatings. It gives pseudoplastic behavior to aqueous systems. It is film-building and shows good affinity to pigments. Thickening is independent of the pH. This product is suitable for the thickening and modification of the flow properties of water-based polymers (e.g., acrylic copolymers, vinyl acetate homopolymers, acrylic polymers, PVAc-VC copolymers, polyurethanes, amine-neutralized and emulsified systems) as well as for products based on polymeric binders such as emulsion paints, texture finishes, high-gloss emulsions paints, water-based putties, adhesives and corrosion primer...view more DSX® 1516 is a non-ionic medium pseudoplastic rheology modifier for water-based coatings. It gives pseudoplastic behavior to aqueous systems. It is film-building and shows good affinity to pigments. Thickening is independent of the pH. This product is suitable for the thickening and modification of the flow properties of water-based polymers (e.g., acrylic copolymers, vinyl acetate homopolymers, acrylic polymers, PVAc-VC copolymers, polyurethanes, amine-neutralized and emulsified systems) as well as for products based on polymeric binders such as emulsion paints, texture finishes, high-gloss emulsions paints, water-based putties, adhesives and corrosion primers. view less | |
| Iscathix® SR | ISCA UK Limited | Iscathix® SR is a 100% active, organic amide based rheological additive, suitable for use in a wide range of coatings. Unlike hydrogenated castor oil based products, Iscathix® SR is very tolerant to strong solvents and high process temperatures. Iscathix® SR can be used to impart thixotropic behaviour into a wide range of systems, including: general industrial coatings, 2K epoxy primer...view more Iscathix® SR is a 100% active, organic amide based rheological additive, suitable for use in a wide range of coatings. Unlike hydrogenated castor oil based products, Iscathix® SR is very tolerant to strong solvents and high process temperatures. Iscathix® SR can be used to impart thixotropic behaviour into a wide range of systems, including: general industrial coatings, 2K epoxy primers and top-coats, 2K polyurethanes, chlorinated rubbers, thermoplastic acrylics, 2K isocyanate-free acrylics, road marking paints, high solids systems, floor paints, adhesives, sealants, etc. view less | |
| K-FLEX® 500P Low-VOC Coalescent | LANXESS (former Emerald Performance Materials) | K-FLEX® 500P offers excellent scrub resistance and gloss and aids in the development of desirable performance characteristics while offering improved handling due to low temperature flexibility. Its performance and value make it a viable replacement to higher-volatility coalescents such as TMPDMIB (2,2,4-trimethyl-1,3-pentanediol monoisobutyrate) or even low-VOC types such as triethylene glycol di-2-ethylhexanoate. It is highly recommended for interior and exterior latex paints, industrial coatings, nitrocellulosic and acrylic lacquers, and special purpose coatings. It is also effective in direct-to-metal coatings such as primer...view more K-FLEX® 500P offers excellent scrub resistance and gloss and aids in the development of desirable performance characteristics while offering improved handling due to low temperature flexibility. Its performance and value make it a viable replacement to higher-volatility coalescents such as TMPDMIB (2,2,4-trimethyl-1,3-pentanediol monoisobutyrate) or even low-VOC types such as triethylene glycol di-2-ethylhexanoate. It is highly recommended for interior and exterior latex paints, industrial coatings, nitrocellulosic and acrylic lacquers, and special purpose coatings. It is also effective in direct-to-metal coatings such as primers. Emerald Kalama Chemical was acquired by LANXESS in 2021. view less | |
| ACTAN® DU20 | Pugh & Co. International | ACTAN® DU20 is an amine adduct in aqueous emulsion which is designed to optimise wet adhesion of two-component water borne epoxy primers on non ferrous substrates such as galvanised steel, aluminium and its alloys. It contains no organic solvent. ACTAN...view more ACTAN® DU20 is an amine adduct in aqueous emulsion which is designed to optimise wet adhesion of two-component water borne epoxy primers on non ferrous substrates such as galvanised steel, aluminium and its alloys. It contains no organic solvent. ACTAN® DU20 with its specific amine functionality provides excellent wet and dry adhesion at a cross linking degree of 100% on metallic substrates and maintains the necessary water barrier to ensure long term protection with solid and liquid epoxy resins. Highest initial hardness is obtained in formulations based on solid epoxy resins. Quicker film formation is obtained in formulations with liquid epoxy resins. view less | |
| Deuteron SR 28 | Deuteron | Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities. Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy. It is ideal for all aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primer...view more Deuteron SR 28 is soluble in water and forms firm gels when used in small quantities. The extremely high thixotropy avoids a breakdown of the solution even in small quantities. Deuteron SR 28 requires no heat for mixing. It can be stirred into cold water or a liquid agent. Using a higher shearing force would lead to a shorter mixing time and a maximum exploitation of the product respectively. A higher shearing force speeds up the dissolving process and leads to a faster final viscosity and thixotropy. It is ideal for all aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. view less | Request Sample |
| CLAYTONE-MPZ | BYK | CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primer...view more CLAYTONE-MPZ is a highly efficient rheology additive based on an organophilic phyllosilicate especially for medium-polarity to high-polarity systems to generate thixotropic flow behavior. Due to its special organic modification, CLAYTONE-MPZ is ideally suited to influencing the flow behavior of polar to medium-polarity coating systems. CLAYTONE-MPZ performs especially well in systems containing aromatic solvents, alcohols, glycols, ketones and esters. CLAYTONE-MPZ is the best solution particularly in epoxy systems or zinc (shop) primers, where high sag resistance or anti-settling performance is required. In comparison to other clays (e.g. Hectorite-based clays) CLAYTONE-MPZ outperforms these products in performance and ease of dispersion. view less | |
| Deuteron ND 953 | Deuteron | Deuteron ND 953 helps to prevent the uncontrollable increase in viscosity which can arise in presence of certain pigments and fillers in heavily-filled aqueous systems. The required rheological properties of the paint or coating material can be obtained just through the character of the used binder or by addition of a suitable thickener. The presence of Deuteron ND 953 improves the storage stability. Unwelcome thickening during storage will be avoided or limited. Deuteron ND 953 is used in aqueous paints and coating materials, e.g. masonry paints, fillers, aqueous primer...view more Deuteron ND 953 helps to prevent the uncontrollable increase in viscosity which can arise in presence of certain pigments and fillers in heavily-filled aqueous systems. The required rheological properties of the paint or coating material can be obtained just through the character of the used binder or by addition of a suitable thickener. The presence of Deuteron ND 953 improves the storage stability. Unwelcome thickening during storage will be avoided or limited. Deuteron ND 953 is used in aqueous paints and coating materials, e.g. masonry paints, fillers, aqueous primers, water-based bituminous emulsions. The product is also suitable for use in water-based pigment preparations. It is most effective in presence of inorganic pigments and fillers. view less | Request Sample |
| K-FLEX® 148 | King Industries, Inc. | K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primer...view more K-FLEX® 148 is a highly reactive, aliphatic polyester polyol which is suggested for melamine or isocyanate crosslinked sealants, adhesives, inks, elastomers, and coatings for better flexibility, higher gloss, and improved flow out. It has a lower viscosity to form higher solid content with good hardness and expanded flexibility. It appears as a clear, light straw liquid, offers good flow and leveling along with being 100% active. K-FLEX® 148 is soluble in ketones, alcohols, esters, Aromatic 100, Aromatic 150, and xylene. It is partially soluble in mineral spirits and is insoluble in water. It is normally applied in office furniture coatings, automotive primers, coil coatings, overprint varnishes, and general industrials. view less | |
| Pangel B42 | Tolsa SA | Pangel® B42 by Tolsa is a powdered rheological additive with high thickening- and anti-settling capacity. It is designed for high polarity systems based on alcohol, glycol, ketone & oxygenated type solvents as well as in mixtures of those with water. It provides strong pseudoplastic- & thixotropic characters, suspension, and anti-sagging properties. It improves consistency and prevents the settling of pigments in printing inks, paints & coatings. It offers high stability during the transportation and storage of coatings. Pangel® B42 is used in epoxy 2k- & urethane coatings, coatings for the lower part of the car, zinc-rich primer...view more Pangel® B42 by Tolsa is a powdered rheological additive with high thickening- and anti-settling capacity. It is designed for high polarity systems based on alcohol, glycol, ketone & oxygenated type solvents as well as in mixtures of those with water. It provides strong pseudoplastic- & thixotropic characters, suspension, and anti-sagging properties. It improves consistency and prevents the settling of pigments in printing inks, paints & coatings. It offers high stability during the transportation and storage of coatings. Pangel® B42 is used in epoxy 2k- & urethane coatings, coatings for the lower part of the car, zinc-rich primers, casting mold, and nitrocellulose-based varnishes. The recommended dosage level for paints & coatings is 0.2-1% and for inks is 0.5-3%. It has a shelf life of 1 year. view less | |
| Aquaflow™ NHS-300E | Ashland | Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build an...view more Aquaflow™ NHS-300E is a solvent-free, nonionic synthetic associative thickener designed for waterborne paint and coatings and is compatible with most latex resin systems. This thickener provides efficient ICI viscosity development, excellent film build and favorable brush drag. This product is compatible with acrylic, styrene-acrylic, vinyl-acrylic, and vinyl acetate ethylene (VAE) latexes, and can be used in interior and exterior paint formulations. view less | |
| Borchers® Deca Manganese 8 | OMG Borchers GmbH | Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primer...view more Borchers® Deca Manganese 8 is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Borchers® Deca Manganese 8 HS | OMG Borchers GmbH | Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primer...view more Borchers® Deca Manganese 8 HS is a highly effective oxidative drier. Manganese provides both surface and through drying properties. Manganese based driers promote both surface and through-dry in oxidatively cured binder systems and are usually used in combination with other primary driers like e.g. Borchi® OXY - Coat or Borchers® Deca Cobalt. Manganese is mainly used in pigmented coating systems and primers because its inherent color may cause discoloration in clear or light colored coatings. High atmospheric humidity severely inhibits the drying effect of manganese based driers. This product is recommended for conventional architectural paints, wood coatings, printing inks and other industrial coatings based on resins that dry by oxidation. view less | |
| Polurene 3031 | S.A.P.I.C.I. SpA | Polurene 3031 is an aromatic isocyanurate with low free TDI content. This product dries quickly with limited yellowing. It can be used in polyurethane sealers and matt topcoats. This product contains less than .5% TDI isocyanates. | |
| Polurene 60 T | S.A.P.I.C.I. SpA | Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI ...view more Polurene 60 T is an aromatic isocyanurate with low free TDI content. This product is compatible with aromatic solvents and nitrocellulose. It can be used in pigmented or clear sealers and matt or gloss topcoats. This product contains less than 1.0% TDI isocyanates. view less | |
| Polurene 7581 | S.A.P.I.C.I. SpA | Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in ad...view more Polurene 7581 is an aromatic isocyanurate with low free TDI content. This product is compatible with saturated polyesters, vinyl resins, and nitrocellulose. It is designed for polyurethane sealers and matt topcoats, particularly those applications in adverse weather conditions of high temperature and humidity. This product contains less than .5% TDI isocyanates. view less | |
| Polurene 2391 | S.A.P.I.C.I. SpA | Polurene 2391 is an aliphatic-aromatic isocyanurate. This product has good yellowing resistance, elasticity, hardness, filling and gloss. It can be used in clear or pigmented high-quality polyurethane high gloss topcoats. This product contains less tha...view more Polurene 2391 is an aliphatic-aromatic isocyanurate. This product has good yellowing resistance, elasticity, hardness, filling and gloss. It can be used in clear or pigmented high-quality polyurethane high gloss topcoats. This product contains less than .5% TDI or IPDI isocyanates. view less | |
| EXOCOAT™ 151A | Axcentive Sarl | EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151A by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151A. It can be used as a general air purifier. Though most effective in outdoor light conditions, it is adapted for use under visible light as found in the interior. In all cases, it should be used as a topcoat to ensure its full effect. Glass and walls coated with EXOCOAT® 151A are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It may be used on other flat surfaces such as plastics or coated substrates yet only interior. It dries under room temperature conditions. Spray application is recommended to reach thin monolayers which prove to be more effective. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| EXOCOAT™ 151B | Axcentive Sarl | EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like V...view more EXOCOAT® 151B by Axcentive is a photocatalytic nano-titanium oxide sol with a strong self-cleaning performance. The photocatalytic effect results in effective radical formation which breaks down organic matter like dirt and soil. Airborne particles like VOCs, NOx, and biopollution are also eradicated by EXOCOAT® 151B. In all cases, it should be used as a topcoat to ensure its full effect. EXOCOAT® 151B coated walls are super hydrophilic enhancing water-sheeting, also called the wash-off effect. It is targeted for porous substrates like concrete, brickwork, and gypsum. It is not meant for glass substrates. It dries under room temperature conditions. Brush, roller, or Spray application is recommended to reach homogeneous coatings. It is listed with EINECS. TSCA, AICS, and CEPA. view less | |
| HALOX® 570 LS | ICL Phosphate Specialty | HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primer...view more HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primers and direct-to-metal topcoats. It has minimal effect on gloss reduction. Recommended dosage level is 1-3% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| NO SED | Bernd Schwegmann GmbH & Co. KG | NO SED is a biodegradable antisettling agent for solvent based coatings. It is composed of organically modified bentonite with additives in solvent mixture. NO SED is very effective against settling and hard sediment in solvent borne coating systems with fillers such as barium sulphate or zinc dust. This product is easily distributed and compatible with most paint systems. It accelerates wetting of pigments and prevents flooding, even where pigments of different specific gravity are used. The dispersion time will be shortened. NO SED will create a thixotropic viscosity providing better processing and avoiding sagging when applied. NO SED prevents settling and hard sedimentation. It is easy to incorporate and suitable for most solvent based systems. Also in very difficult uses NO SED shows effective results. This product is suitable for solvent borne coatings based on alkyde (oven and air drying), acrylic, epoxy, polyester, chlorinated rubber, automotive and industrial coatings as well as road marking paints and zinc dust primer...view more NO SED is a biodegradable antisettling agent for solvent based coatings. It is composed of organically modified bentonite with additives in solvent mixture. NO SED is very effective against settling and hard sediment in solvent borne coating systems with fillers such as barium sulphate or zinc dust. This product is easily distributed and compatible with most paint systems. It accelerates wetting of pigments and prevents flooding, even where pigments of different specific gravity are used. The dispersion time will be shortened. NO SED will create a thixotropic viscosity providing better processing and avoiding sagging when applied. NO SED prevents settling and hard sedimentation. It is easy to incorporate and suitable for most solvent based systems. Also in very difficult uses NO SED shows effective results. This product is suitable for solvent borne coatings based on alkyde (oven and air drying), acrylic, epoxy, polyester, chlorinated rubber, automotive and industrial coatings as well as road marking paints and zinc dust primers. view less | |
| Deuteron VT 819 | Deuteron | The presence of Deuteron VT 819 prevents the settling of pigments/extenders and the separation of the liquid phases during the storage in aqueous systems such as emulsion paints and plasters. The applicability of the paints will be improved. Deuteron VT 819 is compatible with most binders and thickeners which are customary in the paint industry. Deuteron VT 819 is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. The product has no tendency to form lumps. Solutions can be produced with a simple stirrer. The use of a high shear rate is not necessary. The product‘s easy solubility is only given when it is incorporated into systems with a pH-value ranging between neutral and alkaline.When the solution is prepared, its pH-value can be adjusted towards an acidic pH-value. Deuteron VT 819 is ideal for use in aqueous primer...view more The presence of Deuteron VT 819 prevents the settling of pigments/extenders and the separation of the liquid phases during the storage in aqueous systems such as emulsion paints and plasters. The applicability of the paints will be improved. Deuteron VT 819 is compatible with most binders and thickeners which are customary in the paint industry. Deuteron VT 819 is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. The product has no tendency to form lumps. Solutions can be produced with a simple stirrer. The use of a high shear rate is not necessary. The product‘s easy solubility is only given when it is incorporated into systems with a pH-value ranging between neutral and alkaline.When the solution is prepared, its pH-value can be adjusted towards an acidic pH-value. Deuteron VT 819 is ideal for use in aqueous primers, emulsions paints, adhesives, dispersion plasters, printing inks, silicate paints, aqueous preparations of pigments and fillers. view less | Request Sample |
| Borchi® Gel LW 44 | OMG Borchers GmbH | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primer...view more Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. view less | |
| Deuteron XG | Deuteron | The use of Deuteron XG in aqueous systems, such as emulsion paints and plasters, prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is compatible with most binders and thickeners which are customary in the paint industry. Deuteron XG is insoluble in most organic liquids. The product is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. Pre-wetting of Deuteron XG with glycols at a ratio of 1 : 1 accelerates the swelling- and dissolution process. Aqueous solutions of Deuteron XG show a high pseudoplasticity. High rate of shear lowers the viscosity. Reducing the shear rate increases viscosity again. Solutions of Deuteron XG are stable regarding the pH-value and temperature. There is almost no change in stability from pH 2 - 12. The temperature hardly has any influence on the viscosity of a preparation with Deuteron XG. It is ideal for all aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primer...view more The use of Deuteron XG in aqueous systems, such as emulsion paints and plasters, prevents a deposition of the pigments and extenders as well as a separation of the liquid phase during storage. The applicability of the paints is improved. Deuteron XG is compatible with most binders and thickeners which are customary in the paint industry. Deuteron XG is insoluble in most organic liquids. The product is fully soluble in water and mixtures of organic liquids with a water proportion of at least 60 %. Pre-wetting of Deuteron XG with glycols at a ratio of 1 : 1 accelerates the swelling- and dissolution process. Aqueous solutions of Deuteron XG show a high pseudoplasticity. High rate of shear lowers the viscosity. Reducing the shear rate increases viscosity again. Solutions of Deuteron XG are stable regarding the pH-value and temperature. There is almost no change in stability from pH 2 - 12. The temperature hardly has any influence on the viscosity of a preparation with Deuteron XG. It is ideal for all aqueous systems, such as dispersion paints (emulsion paints) and adhesives, emulsion plasters, aqueous insulating primers, glues, slurries, water soluble lacquers and printing inks. view less | Request Sample |
| WorléeFen F 130 | Worlée-Chemie G.m.b.H. | WorléeFen F 130 is a high melting point phenolic modified hard resin for cold cut of alkyds and drying oils. It improves the gloss and film surface hardness of paints and varnishes. W´Fen F 130 is compatible with drying short, medium and long oil alkyds. ...view more WorléeFen F 130 is a high melting point phenolic modified hard resin for cold cut of alkyds and drying oils. It improves the gloss and film surface hardness of paints and varnishes. W´Fen F 130 is compatible with drying short, medium and long oil alkyds. It is also well compatible with drying oils. view less | |
| Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...view more Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. view less | Request Sample |
| pHLEX™ 400 | Ashland | pHLEX™ 400 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designe...view more pHLEX™ 400 neutralizing agent for paints and coatings is a low-odor, pH neutralizing and stabilizing additive designed for easy incorporation and long-term pH stability in all types of latex, emulsion and water reducible paints and coating. It was designed to replace ammonium hydroxide and other organoamine pH neutralizers. Significant odor reduction of the final paint formulation it typically achieved through the use of pHLEX™ 400 neutralizing agent, particularly when used in place of ammonium hydroxide. view less | |
| NECOWEL™ 5110 | ASK Chemicals | NECOWEL™ 5110 is a rheologically modified alkyd emulsion, which is especially suited for the formulation of house paints with high gloss and paint brush application. Due to this modification, the flow behavior of the aqueous house paint is improved. There...view more NECOWEL™ 5110 is a rheologically modified alkyd emulsion, which is especially suited for the formulation of house paints with high gloss and paint brush application. Due to this modification, the flow behavior of the aqueous house paint is improved. There is no need of additional associative thickeners. NECOWEL™ 5110 offers fast drying properties as well as weather- and yellowing resistance. view less | Request Sample |
| NECOWEL™ 5088 | ASK Chemicals | NECOWEL™ 5088 is an aliphatic PU-modified alkyd emulsion with medium oil length. It offers very good drying properties and good weather- and yellowing resistance. It is therefore applicable in air drying top coats, for agricultural equipment. Lacquers bas...view more NECOWEL™ 5088 is an aliphatic PU-modified alkyd emulsion with medium oil length. It offers very good drying properties and good weather- and yellowing resistance. It is therefore applicable in air drying top coats, for agricultural equipment. Lacquers based on NECOWEL™ 5088 show good adhesion on metal- and plastic substrates. view less | Request Sample |
| NECOWEL™ 5286 | ASK Chemicals | NECOWEL™ 5286 is an aliphatic PU-modified alkyd emulsion with medium oil length. It offers outstanding drying properties good weather- and yellowing resistance. It is therefore applicable in air and forced drying top coats for agricultural equipment. Lacq...view more NECOWEL™ 5286 is an aliphatic PU-modified alkyd emulsion with medium oil length. It offers outstanding drying properties good weather- and yellowing resistance. It is therefore applicable in air and forced drying top coats for agricultural equipment. Lacquers based on NECOWEL™ 5286 show good adhesion on metal- and plastic substrates. view less | Request Sample |
| NECOWEL™ 2329 | ASK Chemicals | NECOWEL™ 2329 is an aliphatic PU-modified alkyd resin with medium oil length. It offers good drying properties as well as weather and yellowing resistance. Because of these properties, it is applicable in air-drying top coats on wood and metal. It is also...view more NECOWEL™ 2329 is an aliphatic PU-modified alkyd resin with medium oil length. It offers good drying properties as well as weather and yellowing resistance. Because of these properties, it is applicable in air-drying top coats on wood and metal. It is also used in sustainable wall paints due to the high content of renewable raw materials compared to acrylic emulsions. Lacquers based on NECOWEL™ 2329 show good adhesion on metal- and plastic substrates. view less | Request Sample |
| Coadis™ 123 K | Arkema Rheology & Specialty Additives | Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-born...view more Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-borne systems. view less | Request Sample |
