| Amorphic™ C120 | Bunge Amorphic Solutions, LLC. | Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer...view more Amorphic™ C120 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. view less | |
| Amorphic™ I200 | Bunge Amorphic Solutions, LLC. | Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer...view more Amorphic™ I200 is an engineered aluminum phosphate complex designed for long lasting corrosion protection. This product provides a balance of anodic passivation, direct electrolyte diffusion inhibition, and secondary matrix reinforcement protective mechanisms. It is used in decorative and general purpose paints and coatings, polyester coil primer and topcoat, and automotive refinish primer. view less | |
| 10 AS Wollastocoat® | NYCO Minerals, Inc. | 10 AS Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sac...view more 10 AS Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sacrificing performance. view less | |
| 10 ES Wollastocoat® | NYCO Minerals, Inc. | 10 ES Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sac...view more 10 ES Wollastocoat® is a fine particle size wollastonite that is chemically modified for select primer systems for enhanced corrosion protection and durability. It offers formulators cost savings by replacing 50% or more of corrosion inhibitor without sacrificing performance. view less | |
| DC Sealing Coating | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the prime...view more DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the primer. view less | |
| Zinc Dust-NZD 1620 | Numinor Chemical Industries Ltd. | Zinc Dust-NZD 1620 is a zinc dust in the form of a fine gray powder. It has and average particle size of 5-8 microns and a specific gravity of 7.1. Zinc Dust-NZD 1620 can be used in metal protective coating, metal primer, and other paint and coating appli...view more Zinc Dust-NZD 1620 is a zinc dust in the form of a fine gray powder. It has and average particle size of 5-8 microns and a specific gravity of 7.1. Zinc Dust-NZD 1620 can be used in metal protective coating, metal primer, and other paint and coating applications. view less | |
| Zinc Dust-NZD 1622 | Numinor Chemical Industries Ltd. | Zinc Dust-NZD 1622 is a zinc dust in the form of a fine gray powder. It has and average particle size of 3.5-5.5 microns and a specific gravity of 7.1. Zinc Dust-NZD 1622 can be used in metal protective coating, metal primer, and other paint and coating a...view more Zinc Dust-NZD 1622 is a zinc dust in the form of a fine gray powder. It has and average particle size of 3.5-5.5 microns and a specific gravity of 7.1. Zinc Dust-NZD 1622 can be used in metal protective coating, metal primer, and other paint and coating applications. view less | |
| Zinc Dust-NZD 1625 | Numinor Chemical Industries Ltd. | Zinc Dust-NZD 1625 is a zinc dust in the form of a fine gray powder. It has and average particle size of 2.5-4.5 microns and a specific gravity of 7.1. Zinc Dust-NZD 1625 can be used in metal protective coating, metal primer, and other paint and coating a...view more Zinc Dust-NZD 1625 is a zinc dust in the form of a fine gray powder. It has and average particle size of 2.5-4.5 microns and a specific gravity of 7.1. Zinc Dust-NZD 1625 can be used in metal protective coating, metal primer, and other paint and coating applications. view less | |
| Delaphos® 4 | Delaphos | Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...view more Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. view less | |
| Delaphos® 2 | Delaphos | Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...view more Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. view less | |
| Delaphos® 2M | Delaphos | Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...view more Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. view less | |
| Michem® Prime 4983R | Michelman | Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer...view more Michem® Prime 4983R is an ethylene acrylic acid dispersion that provides outstanding adhesion to both metallic and cellulosic substrates, and enhances the water, grease, oil and solvent resistance of coatings and adhesives. Can serve as a tie coat or primer for extrusion coatings, a foil laminate, a specialty paper coating, a paper sizing agent, a heat sealable coating, nonwoven binder and can also be used as a thermally active binder in thermal transfer release coatings. view less | |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...view more HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| SCHWEGO® Everlast | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Everlast is a rust decontamination system based on chelate. The slightly pasty liquid forms a metallic-organic iron complex with the neutralised rust layer. This developing black, very compact and protective layer provides a long term durability against corrosion and is due to its containing film forming agents at the same time also a perfect primer...view more SCHWEGO® Everlast is a rust decontamination system based on chelate. The slightly pasty liquid forms a metallic-organic iron complex with the neutralised rust layer. This developing black, very compact and protective layer provides a long term durability against corrosion and is due to its containing film forming agents at the same time also a perfect primer. SCHWEGO® everlast is also well suitable for dipping and flow coating of closed containers. Hereafter a top coat should be applied. SCHWEGO® everlast may lead to discolorations of intact coatings and therefore should be removed immediately from them. view less | |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer...view more HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. view less | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer...view more HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. view less | Request Sample |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer...view more EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. view less | |
| HALOX® SW-111 | ICL Phosphate Specialty | HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It ma...view more HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne systems. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primer...view more HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. view less | Request Sample |
| ASCOTRUST® X4 | ASCOTEC | ASCOTRUST® X4 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in Direct To Metal waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...view more HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. view less | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer...view more HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...view more HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primer...view more HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. view less | Request Sample |
| ASCONIUM® 143 | ASCOTEC | ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins. | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...view more HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. view less | Request Sample |
| HALOX® BW-111 | ICL Phosphate Specialty | HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent...view more HALOX® BW-111 by ICL is a low-cost barium phosphosilicate-based corrosion inhibiting pigment. It is a white, non-refractive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is recommended for use in solvent-based epoxy systems, both conventional and high solids. The dosage level is 5-10% based on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems. HALOX® BW-111 has a shelf life of 36 months. view less | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...view more HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. view less | Request Sample |
| ASCOTRUST® X1 | ASCOTEC | ASCOTRUST® X1 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primer...view more HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. view less | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primer...view more HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. view less | Request Sample |
| ASCOTRAN® H17 | ASCOTEC | ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash ...view more ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
| Nubirox SP | Ferro Pigments | Nubirox SP is a unique, special particle Zinc Phosphate. It is a white Anticorrosive pigment with high specific surface, much more efficient than conventional Zinc Phosphate. | |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...view more HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. view less | Request Sample |
| Nubirox 213 | Ferro Pigments | Nubirox 213 is a labeling-free, beige Anticorrosive pigment. It is a multiphase Iron and Zinc Phosphate with good performance specially in solventborne epoxy and alkyd sytems. | |
| VANSIL® CK-20 | Vanderbilt Minerals, LLC | VANSIL® CK-20 is a grade of wollastonite (calcium metasilicate) which disperses to 0 to 1 Hegman fineness. This product is useful as an extender in high-build coatings such as block fillers and texture paints. | |
| ASCONIUM® 142DA | ASCOTEC | ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
| ASCOTRAN® H10 | ASCOTEC | ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion ...view more ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). view less | Request Sample |
| HALOX® 630 | ICL Phosphate Specialty | HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primer...view more HALOX® 630 by ICL is a liquid organic corrosion inhibitor for solvent-based protective coatings on metal surfaces. It is an alkylammonium salt solution, a 70% active substance in xylene. It can be used in solvent-borne clear or pigmented coatings and in systems such as 2-pack epoxy systems, high solids epoxy esters, alkyds, acrylic resins, silicones, polyesters, and 2-pack polyurethane primers. It is recommended for auto refinish, OEM, DTM, industrial and marine coatings. HALOX® 630 shows superior corrosion resistance over poorly prepared surfaces, such as adherent rust or oil contamination. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 36 months. view less | Request Sample |
| Nubirox FR-10 | Ferro Pigments | Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapo...view more Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapour and liquid phase. view less | |
| Nubirox 106 | Ferro Pigments | Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such a...view more Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such as Coil Coatings). view less | |
| ASCONIUM® 114 | ASCOTEC | ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins. | Request Sample |
| Zinc Tetraoxychromate TC20 | SNCZ Société Nouvelle des Couleurs Zinciques | Zinc Tetraoxychromate TC20 is a low dust, yellow powder. This is a stable and non-hygroscopic powder with a low tinting strength, and it is easily dispersed. Zinc Tetraoxychromate TC20 is recommended for use in all sorts of temporary protection systems. It is particularly recommended for shop primers and wash primer...view more Zinc Tetraoxychromate TC20 is a low dust, yellow powder. This is a stable and non-hygroscopic powder with a low tinting strength, and it is easily dispersed. Zinc Tetraoxychromate TC20 is recommended for use in all sorts of temporary protection systems. It is particularly recommended for shop primers and wash primers designed for steel and aluminium protection. view less | Request Sample |
| BECKOCURE™ EH 2240/70MP | Allnex | BECKOCURE® EH 2240/70MP is an adduct hardener based on polyamines, thus free of volatile amines. In combination with suitable epoxy resins this hardener enables the formulation of high performing 2K high solids anticorrosion primers. | Request Sample |
| PHOSPHINOX PZ06 | SNCZ Société Nouvelle des Couleurs Zinciques | PHOPHINOX PZ06 is a basic Zinc Phosphate designed to be more reactive than standard Zinc Phosphate in PU and Alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. This product is an alternative to chromates, for instance it successfully replaces chromates in wash primer...view more PHOPHINOX PZ06 is a basic Zinc Phosphate designed to be more reactive than standard Zinc Phosphate in PU and Alkyd systems. It is a stable and non-hygroscopic white powder with a low tinting strength, and it is easily dispersed. This product is an alternative to chromates, for instance it successfully replaces chromates in wash primers. view less | Request Sample |
| Zinc Dust – Micron 4 | Zinchem | Zinc Dust – Micron 4 is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. It's particle size is 4 μm. It is a protective coating used in primer...view more Zinc Dust – Micron 4 is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. It's particle size is 4 μm. It is a protective coating used in primers for Galvanized Steel, and in the preparation of Zinc rich paints. view less | |
| Zinc Dust – Micron 5 | Zinchem | Zinc Dust – Micron 5 is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. It's particle size is 5 μm. It is a protective coating used in primer...view more Zinc Dust – Micron 5 is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. It's particle size is 5 μm. It is a protective coating used in primers for Galvanized Steel, and in the preparation of Zinc rich paints. view less | |
| Zinc Dust – Micron 7 | Zinchem | Zinc Dust – Micron 7 is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. It's particle size is 7 μm. It is a protective coating used in primer...view more Zinc Dust – Micron 7 is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. It's particle size is 7 μm. It is a protective coating used in primers for Galvanized Steel, and in the preparation of Zinc rich paints. view less | |
| Zinc Dust – Type 1 Superfine | Zinchem | Zinc Dust – Type 1 Superfine is made by distilling primary or secondary zinc in closed, horizontal furnaces. The vapour emitted from the zinc is led into large condensers, which is condensed as dust. Its particle size is superfine. It is a protective coating used in primer...view more Zinc Dust – Type 1 Superfine is made by distilling primary or secondary zinc in closed, horizontal furnaces. The vapour emitted from the zinc is led into large condensers, which is condensed as dust. Its particle size is superfine. It is a protective coating used in primers for galvanized steel, and in the preparation of zinc rich paints. view less | |
| Zinc Dust – Type 1 Mining Grade | Zinchem | Zinc Dust – Type 1 Mining Grade is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. The sieve residue at +45 μm is < 3.0%. It is a prote...view more Zinc Dust – Type 1 Mining Grade is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. The sieve residue at +45 μm is < 3.0%. It is a protective coating used in primers for Galvanized Steel, and in the preparation of Zinc rich paints. view less | |
| ProHere® E 00006 | Michelman | ProHere® E 00006 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00006 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| ProHere® E 00005 | Michelman | ProHere® E 00005 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00005 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| ProHere® E 00004 | Michelman | ProHere® E 00004 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00004 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| ProHere® E 00003 | Michelman | ProHere® E 00003 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00003 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| ProHere® E 00002 | Michelman | ProHere® E 00002 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00002 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| ProHere® E 00001 | Michelman | ProHere® E 00001 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and a...view more ProHere® E 00001 is a polyolefin-acrylic hybrid dispersion designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| Zinc Dust – SAFZINxxx (Super Pure Super Fine) | Zinchem | Zinc Dust – SAFZINxxx (Super Pure Super Fine) is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. Its particle size is 2.5-4 μm. It is a protective coating used in primer...view more Zinc Dust – SAFZINxxx (Super Pure Super Fine) is made by distilling primary or secondary Zinc in closed, horizontal furnaces. The vapour emitted from the Zinc is led into large condensers, which is condensed as dust. Its particle size is 2.5-4 μm. It is a protective coating used in primers for Galvanized Steel, and in the preparation of Zinc rich paints. view less | |
| KORRODUR | Bernd Schwegmann GmbH & Co. KG | KORRODUR is a corrosion protection additive for solvent borne coating systems. It is primarily a rust converting additive for conventional alkyd resin paints. However, Korrodur also has a good effect in solvent containing paints based on epoxy, chlorinated rubber or acrylic binders. Typical applications are: Anticorrosive primer...view more KORRODUR is a corrosion protection additive for solvent borne coating systems. It is primarily a rust converting additive for conventional alkyd resin paints. However, Korrodur also has a good effect in solvent containing paints based on epoxy, chlorinated rubber or acrylic binders. Typical applications are: Anticorrosive primers, one coat anticorrosive systems, and maintenance finishes. view less | |
| ProHere® E 00007 | Michelman | ProHere® E 00007 is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminu...view more ProHere® E 00007 is a high solids water based binder designed for formulating anti-corrosion primers and pre-treatment sealers for metallic substrates to provide excellent adhesion to various metallic substrates like steel, electroplated steel and aluminum. In addition, it provides excellent water resistance and chemical resistance to acids and many solvents. view less | |
| HALOX® 650 | ICL Phosphate Specialty | HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primer...view more HALOX® 650 by ICL is a zero-VOC, organic corrosion inhibitor. It is designed specifically for solvent-based or powder-coating applications to provide long-term corrosion protection, flash-rust inhibition, in-can rust prevention, and improved adhesion performance. It is primarily designed for coatings and primers on metal surfaces. It can be used in applications such as coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid catalyzed thermosetting systems such as melamine or urea formaldehyde, and wash (etch) primers based on PVB. It is suitable for solvent-based polyurethanes, short-, medium- & long oil alkyds, and silicones. It is also suitable for clear coats, thin films, and aerospace coating. The dosage level of the grade is 1-3% based on total formulation solids. HALOX® 650 has a shelf life of 36 months. view less | Request Sample |
| NACORR® 1151 | King Industries, Inc. | NACORR® 1151 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product can be used in air dry and thermoset coatings. It is suggested for primer...view more NACORR® 1151 is a liquid corrosion inhibitor based on the barium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product can be used in air dry and thermoset coatings. It is suggested for primers and general industrial maintenance solvent-borne coatings. view less | |
| NACORR® 1351 | King Industries, Inc. | NACORR® 1351 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product can be used in air dry and thermoset coatings. It is suggested for primer...view more NACORR® 1351 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product can be used in air dry and thermoset coatings. It is suggested for primers and general industrial maintenance solvent-borne coatings. view less | |
| NACORR® 1389 | King Industries, Inc. | NACORR® 1389 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product can be used in air dry and thermoset coatings. It is suggested for primer...view more NACORR® 1389 is a liquid corrosion inhibitor based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and in-can viscosity stability. This product can be used in air dry and thermoset coatings. It is suggested for primers and general industrial maintenance solvent-borne coatings. view less | |
| BECKOCURE™ EH 2261w/41WA | Allnex | BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corros...view more BECKOCURE™ EH 2261w/41WA is a hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corrosion protection and very good non-sagging properties can be formulated, which show good adhesion on untreated, smooth or galvanized steel substrates. view less | Request Sample |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...view more BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. view less | Request Sample |
| KORRODUR AL 2 | Bernd Schwegmann GmbH & Co. KG | KORRODUR AL 2 is used e.g. in primers to compensate poor preparation of the substrate and unsatisfactory painting conditions. It converts residual rust into non corroding iron tannate and provides long term protection against corrosion. If moisture is pr...view more KORRODUR AL 2 is used e.g. in primers to compensate poor preparation of the substrate and unsatisfactory painting conditions. It converts residual rust into non corroding iron tannate and provides long term protection against corrosion. If moisture is present it will be emulsified into the film during painting and will evaporate during drying. The wetting agent ensures good penetration of the residual rust particles, dirt and wetting of badly degreased surfaces. view less | |
| NACORR® 1551 | King Industries, Inc. | NACORR® 1551 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.95, good corrosion resistance, water resistance, stability, improves cure rate, and improves color and gloss quality. This product can be used in non-aqueous air dry and thermoset coatings. It is suggested for primer...view more NACORR® 1551 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.95, good corrosion resistance, water resistance, stability, improves cure rate, and improves color and gloss quality. This product can be used in non-aqueous air dry and thermoset coatings. It is suggested for primers, general industrial and maintenance coatings. view less | |
| NACORR® 1552 | King Industries, Inc. | NACORR® 1552 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, improves cure rate, and improves color and gloss quality. This product can be used in non-aqueous air dry and thermoset coatings. It is suggested for primer...view more NACORR® 1552 is a liquid corrosion inhibitor based on the zinc salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, improves cure rate, and improves color and gloss quality. This product can be used in non-aqueous air dry and thermoset coatings. It is suggested for primers, general industrial and maintenance coatings. view less | |
| NACORR® XR-422 MS | King Industries, Inc. | NACORR® XR-422 MS is a liquid corrosion inhibitor based on calcium compounds. It appears as a light, amber liquid and offers good corrosion resistance, it is easily incorporated in most paint systems, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in solvent-based air dry and thermoset coatings. It is suggested for 2K urethane primer...view more NACORR® XR-422 MS is a liquid corrosion inhibitor based on calcium compounds. It appears as a light, amber liquid and offers good corrosion resistance, it is easily incorporated in most paint systems, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in solvent-based air dry and thermoset coatings. It is suggested for 2K urethane primers, general industrial and maintenance coatings. view less | |
| Intelli-ion® | Hexigone Inhibitors Ltd | Intelli-ion® is an award-winning, patented technology that is designed to completely replace heavy metal and chromate inhibitors or co-blend with phosphate inhibitors. It provides the coatings market with cost-effect, high-performance, sustainable anti-corrosive additives. The smart technology fights corrosion when used in primer...view more Intelli-ion® is an award-winning, patented technology that is designed to completely replace heavy metal and chromate inhibitors or co-blend with phosphate inhibitors. It provides the coatings market with cost-effect, high-performance, sustainable anti-corrosive additives. The smart technology fights corrosion when used in primers with full system barrier topcoats and is compatible with a broad spectrum of resin types, coating types, and coatings manufacturing routes. view less | |
| NACORR® 1389 MS | King Industries, Inc. | NACORR® 1389 MS is a liquid corrosion inhibitor based on the calcium salt of organic acids that is put in mineral spirits. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and it can easily be incorporated in most paint systems. This product can be used in solvent-based air dry and thermoset coatings. It is suggested for 2K urethane primer...view more NACORR® 1389 MS is a liquid corrosion inhibitor based on the calcium salt of organic acids that is put in mineral spirits. It appears as a clear, brown viscous liquid and offers good corrosion resistance, water resistance, stability, and it can easily be incorporated in most paint systems. This product can be used in solvent-based air dry and thermoset coatings. It is suggested for 2K urethane primers, general industrial and maintenance coatings. view less | |
| NACORR® 1754 | King Industries, Inc. | NACORR® 1754 is a liquid corrosion inhibitor that is based on an amine salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in water based primer...view more NACORR® 1754 is a liquid corrosion inhibitor that is based on an amine salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in water based primers for appliance, coil and automotive applications. view less | |
| NACORR® 1651 | King Industries, Inc. | NACORR® 1651 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.93, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primer...view more NACORR® 1651 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 0.93, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primers, general industrial and maintenance coatings. view less | |
| NACORR® 1652 | King Industries, Inc. | NACORR® 1652 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primer...view more NACORR® 1652 is a liquid corrosion inhibitor based on the magnesium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers a specific gravity of 1.0, good corrosion resistance, water resistance, stability, viscosity, and gives synergistic results when combined with anti-corrosive pigments. This product can be used in water-based air dry and thermoset coatings. It is suggested for water-based primers, general industrial and maintenance coatings. view less | |
| NACORR® 1352 | King Industries, Inc. | NACORR® 1352 is a liquid corrosion inhibitor that is based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, good color strength, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in waterborne primer...view more NACORR® 1352 is a liquid corrosion inhibitor that is based on the calcium salt of an aromatic sulfonic acid. It appears as a clear, dark amber liquid and offers corrosion resistance, water resistance, stability, good color strength, and gains synergistic results when combined with anti-corrosive pigments. This product can be used in most kinds of aqueous air dry and thermoset coatings. It is suggested to be used in waterborne primers, general industrial and maintenance coatings. view less | |
| Silane ATPN-1120 | Beijing Entrepreneur Science &Trading Co., Ltd. | Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primer...view more Silane ATPN-1120 is a clear, colorless, strongly alkaline liquid with smell being very sensitive to hydrolysis. The chloride content ranges in the lower ppm-level. ATPN-1120 is used as adhesion promoter at organic/inorganic interfaces, for modification of surfaces (corrosion prevention, component of primers) or silicone-polymers or as crosslinker (moisture crosslinking of polymers). The application as“coupling agent”leads in general to an improvement of mechanical and electrical product properties above all under exposure to heat and/or moisture. view less | |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primer...view more HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. view less | Request Sample |
| HALOX® 570 LS | ICL Phosphate Specialty | HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primer...view more HALOX® 570 LS by ICL is an organic corrosion inhibitor. It is a liquid version of HALOX® 570 (powder). It is designed for use in water-based industrial and decorative coatings. It provides flash rust and long-term corrosion protection on metal surfaces. It is environmentally friendly, nitrite-, phosphate- & heavy metal-free, and can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS can be used in formulations based on water-based acrylics, epoxy esters, 2-component epoxy, water-reducible alkyds, and water-based polyurethanes. It is suitable for primers and direct-to-metal topcoats. It has minimal effect on gloss reduction. Recommended dosage level is 1-3% based on total formula weight. It has a shelf life of 36 months. view less | Request Sample |
