| ColorDesigner PLUS Paint Matching Software | X-Rite Europe GmbH | ColorDesigner PLUS Paint Matching Software has fast and accurate color matching that is crucial in retail paint to retain customer satisfaction. ColorDesigner PLUS, tailored for retail paint, combined with X-Rite's color measurement instrumentation, eleva...voir plus ColorDesigner PLUS Paint Matching Software has fast and accurate color matching that is crucial in retail paint to retain customer satisfaction. ColorDesigner PLUS, tailored for retail paint, combined with X-Rite's color measurement instrumentation, elevates the paint department to a color design center. This complete color solution streamlines the selection process and eliminates waste and formulation errors. voir moins |  |
| COPONYL™ N-6803 | Nippon Gohsei | COPONYL™ N-6803 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It is formulated to provide good corrosion resistance and for use in thin-layer optical applications. This product is well suited for us...voir plus COPONYL™ N-6803 is a pressure sensitive adhesive resin formulated from acrylic acid ester using ethyl acetate solvent. It is formulated to provide good corrosion resistance and for use in thin-layer optical applications. This product is well suited for use in electronics and adhesives. voir moins | |
| DYHARD® MCA10 | AlzChem | DYHARD® MCA10 is a special formulated curing agent for low temperature cure, or very fast cure at standard cure temperatures. A formulated 1K-Epoxy resins system with DYHARD® MCA10 still has an acceptable long latency of a few weeks at room temperature. | |
| Novapol U7101-70 | Novaresine S.r.l | Novapol U7101-70 is an unsaturated polyester resin that is catalyzed with amines to improve reactivity with peroxide. It is suitable to formulate mastics and filler for marble and car refinishing as well as abrasive mixtures. Products that are formulated ...voir plus Novapol U7101-70 is an unsaturated polyester resin that is catalyzed with amines to improve reactivity with peroxide. It is suitable to formulate mastics and filler for marble and car refinishing as well as abrasive mixtures. Products that are formulated with the resin are marked by high reactivity at lower temperatures and high compatibility with all marble surfaces. voir moins | |
| Neboplast® SB 8765 | NECARBO B.V. | Neboplast® SB 8765 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake, pigment binding properties, and is alkali and water resistant. Neboplast® SB 8765 for...voir plus Neboplast® SB 8765 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake, pigment binding properties, and is alkali and water resistant. Neboplast® SB 8765 forms a flexible film and finds application in the formulation of indoor and outdoor coatings, sealants, adhesives, and crack-binding systems. voir moins | |
| XR-145S | Bomar, formerly Dymax Oligomers & Coatings | XR-145S is a high molecular weight, trifunctional aliphatic polyether urethane methacrylate that provides low formulation viscosity and moderate elongation. XR-145S shows adhesion to a variety of substrates, making it a candidate for consideration in mixe...voir plus XR-145S is a high molecular weight, trifunctional aliphatic polyether urethane methacrylate that provides low formulation viscosity and moderate elongation. XR-145S shows adhesion to a variety of substrates, making it a candidate for consideration in mixed surface adhesion applications. XR-145S is also tin-free, making it an excellent candidate for dental or cosmetic applications that restrict the use of tin. voir moins | |
| 4997-X-50 Epoxy Ester Resin | Gabriel Performance Products | 4997-X-50 Epoxy Ester Resin is formulated to resist discoloration when exposed to heat. | |
| Telalit 3404 X 70 | Spolchemie | Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. T...voir plus Telalit 3404 X 70 is a yellow-brown amine hardener for epoxy resin systems. This product is 70% xylene solution of poly-amino-amide with a flashpoint of 31 °C. This amine hardener is modified by dimer and monomeric fatty acids and aliphatic poly-amines. Telalit 3404 X 70 is primarily used in the formulation of two-component anti-corrosive epoxy coatings. voir moins | |
| Decospaera Transparent 3 EF | DKSH | Decospaera Transparent 3 EF can be used with any type of waterborne binder due to the good overall compatibility. It is suitable for the formulation of very low gloss finishes where soft effect and high slip are required, combined with remarkable transpa...voir plus Decospaera Transparent 3 EF can be used with any type of waterborne binder due to the good overall compatibility. It is suitable for the formulation of very low gloss finishes where soft effect and high slip are required, combined with remarkable transparency, very good abrasion resistance, and high resistance to scratch and polishing effect. It is obtained from a solvent-free industrial process. voir moins | Request Sample |
| DESMODUR® 2460 M | Covestro | A monomeric diphenylmethane diisocyanate with high 2,4'-isomer content and stabilized against discoloration during storage. Formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Is an...voir plus A monomeric diphenylmethane diisocyanate with high 2,4'-isomer content and stabilized against discoloration during storage. Formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Is an isomeric mixture of monomeric diphenylmethane diisocyanate that is liquid at temperatures above 20 °C. Storage and handling are greatly simplified compared to 4,4' isomer that is solid at room temperature. voir moins | |
| Domide GX-460 | Kukdo Chemical Co., Ltd. | Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for for...voir plus Domide GX-460 is a Polyamidoamine / Epoxy adduct dissolved in Ethanol for reaction with solid or liquid Epoxy Resins. GX-460 is useful in maintenance coating and primers. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for marine and industrial purposes. voir moins | |
| Castor Polyol (Type 115) | Castor International BV | Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and th...voir plus Castor Polyol (Type 115) is a medium viscosity, solventless polyol with ester and ether groups. It is a yellow colored liquid, has a specific gravity of 1.000 ± 0.00 (25°C) and is developed as an alternative for Desmophen-1150. It is cured with MDI and the nature and addition of additives and fillers may vary depending on the particular formulation for making: adhesives, coatings, floorings, and electrical casting applications. voir moins | |
| CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...voir plus CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. voir moins | Request Sample |
| DESMODUR® LS 2424 | Covestro | A monomeric diphenylmethane diisocyanate with high 2,4'-isomer content used in formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Is an isomeric mixture of monomeric diphenylmethan...voir plus A monomeric diphenylmethane diisocyanate with high 2,4'-isomer content used in formulation of prepolymers for use in one- and two-component polyurethane coatings and adhesives and in related applications. Is an isomeric mixture of monomeric diphenylmethane diisocyanate that is liquid at temperatures above 20 °C. Storage and handling are greatly simplified compared to 4,4' isomer that is solid at room temperature (Desmodur 44 M, Desmodur 44 MC). voir moins | |
| 1/8" Compact PH/Temperature Probes | Automaxion | Automaxion ensures companies that want to automate their chemical laboratories get an independent, experienced and creative assessment of their needs and recommendations on how to proceed. Dr Bysouth has performed such feasibility studies for a number of ...voir plus Automaxion ensures companies that want to automate their chemical laboratories get an independent, experienced and creative assessment of their needs and recommendations on how to proceed. Dr Bysouth has performed such feasibility studies for a number of high profile companies now performing High Throughput Formulation using systems requiring an investment of up to $8 million, and worked with provider companies to demonstrate or improve their product performance. voir moins | |
| Neboplast® SB 8750 | NECARBO B.V. | Neboplast® SB 8750 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake and whitening, is alkali and water resistant, and has pigment binding properties. Nebo...voir plus Neboplast® SB 8750 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake and whitening, is alkali and water resistant, and has pigment binding properties. Neboplast® SB 8750 finds use in the formulation of indoor and outdoor coatings from low to high PVC, and in sealants, adhesives, and roof coatings. voir moins | |
| Luna PTSI-P | DKSH | Luna PTSI-P is used in the formulation of polyurethane products as a reactive additive with low viscosity. Luna PTSI-P prevents moisture related problems by reacting with trace moisture. Excess water reacts with Luna PTSI-P towards the corresponding carba...voir plus Luna PTSI-P is used in the formulation of polyurethane products as a reactive additive with low viscosity. Luna PTSI-P prevents moisture related problems by reacting with trace moisture. Excess water reacts with Luna PTSI-P towards the corresponding carbamic acid, which undergoes immediate decomposition to form carbon dioxide, and the relatively inert p- toluene sulfonamide, which is commonly used as a plasticizer. voir moins | Request Sample |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| GABEPRO® GPM-888 | Gabriel Performance Products | GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low te...voir plus GABEPRO® GPM-888 is formulated from a mercaptan (SH) terminated liquid curing agent which imparts rapid-cure characteristics to epoxy resins in combination with selected amines. These systems are unique in that they also provide rapid cure rates at low temperatures and in thin films. This material is formulated to cure epoxy resin in approximately 5 minutes. voir moins | |
| BR-744SD | Bomar, formerly Dymax Oligomers & Coatings | BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can...voir plus BR-744SD is a difunctional, aliphatic polyester urethane acrylate offering excellent adhesion, flexibility, and tensile strength. It can be effectively formulated for adhesion to steel, aluminum, and various plastics. Products formulated with BR-744SD can be highly flexible, elastomeric, and tacky. It is excellent as an adhesion promoter or reactive tackifier and is a perfect choice for optically clear UV-PSAs. voir moins | |
| SONGNOX® 1010 | Songwon International AG | SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effe...voir plus SONGNOX® 1010 is a primary antioxidant for organic polymers. It reduces viscosity change and gel formulation. SONGNOX® 1010 provides long term heat stability - protects physical properties during storage and use of end-product. Exhibits a synergistic effect in combination with SONGNOX® 1680 and other secondary antioxidants. It can also be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use voir moins | |
| Incozol 2 | Incorez Ltd. | Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and...voir plus Incozol 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. Incozol 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content. voir moins | |
| DESMODUR® VH 20 N | Covestro | A polyisocyanate based on diphenylmethane diisocyanate used in combination with polyols to formulate two-component coatings and sealing compounds and to manufacture prepolymers. | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| Aquarez EVA T21 | Aquaspersions | Aquarez EVA T21 is an APEO-free, water-based emulsion of a tackified EVA terpolymer. This product has excellent adhesion to a wide variety of substrates, including aluminum, polyethylene, polyester and paper. It can be used as a base for the formulation...voir plus Aquarez EVA T21 is an APEO-free, water-based emulsion of a tackified EVA terpolymer. This product has excellent adhesion to a wide variety of substrates, including aluminum, polyethylene, polyester and paper. It can be used as a base for the formulation of low-activation temperature heat-seal coating. Aquarez EVA T21 comes in a low-viscosity, easy-to-handle water-based form and has excellent storage stability. voir moins | |
| BRC-441D | Bomar, formerly Dymax Oligomers & Coatings | BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated i...voir plus BRC-441D is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical and temperature resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture sensitive or hydrophobic applications. voir moins | |
| BRC-4421 | Bomar, formerly Dymax Oligomers & Coatings | BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated ...voir plus BRC-4421 is a difunctional, hydrophobic urethane acrylate that can be formulated into chemical- and temperature-resistant coatings and resins. The material has low color and excellent adhesion to a wide variety of plastics. The material can be formulated into tough, impact resistant 3D printing resins with excellent flexibility. It’s ultra-low water absorption makes this an excellent choice for moisture-sensitive or hydrophobic applications. voir moins | |
| MDI CI 25/1200 | Castor International BV | MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...voir plus MDI CI 25/1200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 25/1200 has an approximate equivalent weight of 168 g/mol with a viscosity of 1200 mPa.s at 23°C. voir moins | |
| MDI CI 22/1500 | Castor International BV | MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...voir plus MDI CI 22/1500 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 22/1500 has an approximate equivalent weight of 191 g/mol with a viscosity of 1500 mPa.s at 23°C. voir moins | |
| MDI CI 15/10000 | Castor International BV | MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solven...voir plus MDI CI 15/10000 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 15/10000 has an approximate equivalent weight of 280 g/mol with a viscosity of 10000 mPa.s at 23°C. voir moins | |
| MDI CI 16/1800 | Castor International BV | MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent...voir plus MDI CI 16/1800 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 16/1800 has an approximate equivalent weight of 262 g/mol with a viscosity of 1800 mPa.s at 23°C. voir moins | |
| MDI CI 32/200 | Castor International BV | MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...voir plus MDI CI 32/200 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/200 has an approximate equivalent weight of 125 g/mol with a viscosity of 200 mPa.s at 23°C. voir moins | |
| MDI CI 32/120 | Castor International BV | MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-...voir plus MDI CI 32/120 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/120 has an approximate equivalent weight of 126 g/mol with a viscosity of 120 mPa.s at 23°C. voir moins | |
| MDI CI 32/40 | Castor International BV | MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-f...voir plus MDI CI 32/40 (MDI – Methylene Diphenyl Diisocyanate), an aromatic polyisocyanate, is used for curing polyurethane formulation in typical CASE applications such as topcoats, primers, moldings, adhesives, and 2 pack coating systems. It is a brown solvent-free liquid and is compatible with several polyester and polyether with hydroxyl groups. MDI CI 32/40 has an approximate equivalent weight of 129 g/mol with a viscosity of 40 mPa.s at 23°C. voir moins | |
| DESMODUR® BL 3575/1 MPA/SN | Covestro | A blocked aliphatic polyisocyanate based on HDI ideal for use in combination with Desmophen grades to formulate lightfast, one-component stoving polyurethane coatings. | |
| Novapol U7102-70 | Novaresine S.r.l | Novapol U7102-70 is an orthophthalic polyester resin that displays low reactivity and excellent adhesion. This product is ideal for use in formulating thixotropic putties. | |
| VINNAPAS® 4019 E | Wacker Chemie AG | VINNAPAS® 4019 E is a copolymer powder of vinyl acetate and ethylene. It is dispersible in water and is suitable for formulating compounds of high ultimate strength. | |
| DYHARD® MCA30 | AlzChem | DYHARD® MCA30 is a non toxic, special formulated curing agent for low temperature cure, high gloss epoxy powder coatings. | |
| LumiSet™ LSR-241 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-241 is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241 is a solvent-borne film-forming resin that...voir plus LumiSet™ LSR-241 is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance, gloss, and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, gloss, and hydrophobicity offers formulators an alternative to leachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241 should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241 is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiator. voir moins | |
| DYHARD® 100 | AlzChem | DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations...voir plus DYHARD® 100 is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100S | AlzChem | DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeration...voir plus DYHARD® 100S is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SH | AlzChem | DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SH is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| DYHARD® 100SF | AlzChem | DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomeratio...voir plus DYHARD® 100SF is part of a series that consists of different micronized grades of dicyandiamide curing agents for the formulation of thermosetting epoxy resin compositions. They contain up to 3 % of inert anti-caking agent in order to prevent agglomerations and to improve handling. The products of the DYHARD® 100 series do not react with epoxy resins at moderate temperatures. Dispersed in epoxy resin the mixture remains stable until activated by heat. voir moins | |
| Ci7860 Sphere Benchtop Spectrophotometer | X-Rite Europe GmbH | Ci7860 Sphere Benchtop Spectrophotometer delivers 25% tighter specifications than any other industrial instrument, consuming less of the tolerance allocated for color variation with instrument variability. Built-in temperature and humidity sensors ensure ...voir plus Ci7860 Sphere Benchtop Spectrophotometer delivers 25% tighter specifications than any other industrial instrument, consuming less of the tolerance allocated for color variation with instrument variability. Built-in temperature and humidity sensors ensure the environment is suitable, and embedded NetProfiler status lights verify the device is optimized for each measurement. Standards created with the Ci7860 can be used for each stage of the product development process, from formulation to final production to quality control. voir moins |  |
| ETERNACOLL® OXTP | UBE Chemical Europe | A fine white powder. Thermal curing with carboxylic acid anhydrides provides good hardened materials. Mainly applied to coatings formulated in a powder form. | |
| Pinerez® 7053 E | Lawter | Pinerez® 7053 E is a formulated blend of plasticizers and resins that are used as a resin melt tackifier. The product is ideally suited for use in flooring adhesives. | |
| SYNTHEBOND™ PRIME 7501 | Synthomer | SYNTHEBOND™ PRIME 7501 is a coater ready acrylic emulsion polymer formulated for applications where high shear and high temperature resistance is needed. | |
| VANTOCIL™ TG Antimicrobial | Arxada | VANTOCIL™ TG Antimicrobial is a broad spectrum, fast acting bactericide for the formulation of disinfectants and sanitisers. It is a 20% aqueous solution of poly(hexamethylenebiguanide) hydrochloride, also known as PHMB. VANTOCIL™ TG Antimicrobial is used...voir plus VANTOCIL™ TG Antimicrobial is a broad spectrum, fast acting bactericide for the formulation of disinfectants and sanitisers. It is a 20% aqueous solution of poly(hexamethylenebiguanide) hydrochloride, also known as PHMB. VANTOCIL™ TG Antimicrobial is used in industrial, institutional, agricultural, food, beverage and domestic disinfection applications, primarily as a solid surface disinfectant, specifically for hospitals, veterinary establishments, dairies, milking parlors, breweries, air-conditioning units, and pasteurizers in canned food & beverage bottling plants. voir moins | |
| Proxel™ BC Antimicrobial | Arxada | Proxel™ BC Antimicrobial is broad spectrum preservative for the protection of industrial water-based products against spoilage from bacteria, yeasts and fungi. It is an aqueous dispersion of formulation of 1,2-benzisothiazolin-3-one (BIT) and a 3:1 blend...voir plus Proxel™ BC Antimicrobial is broad spectrum preservative for the protection of industrial water-based products against spoilage from bacteria, yeasts and fungi. It is an aqueous dispersion of formulation of 1,2-benzisothiazolin-3-one (BIT) and a 3:1 blend of 5-chloro-2-methyl-4-isothiazolin-3-one (CMIT) and 2-methyl-4-isothiazolin-3-one (MIT). This product is effective in polymer emulsions, paints, adhesives, pigment dispersions and household products. voir moins | |
| DEGACRYL® HS 555 | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethyle...voir plus DEGACRYL® HS 555 is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 555 will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| VANTOCIL™ IB Antimicrobial | Arxada | VANTOCIL™ IB Antimicrobial is a broad spectrum, fast acting bactericide for the formulation of disinfectants and sanitisers. This product is a 20% aqueous solution of poly (hexamethylene biguanide) hydrochloride (PHMB). VANTOCIL™ IB Antimicrobial is produ...voir plus VANTOCIL™ IB Antimicrobial is a broad spectrum, fast acting bactericide for the formulation of disinfectants and sanitisers. This product is a 20% aqueous solution of poly (hexamethylene biguanide) hydrochloride (PHMB). VANTOCIL™ IB Antimicrobial is produced for use in industrial, institutional, agricultural, food, beverage, and domestic disinfection applications, primarily as a solid surface disinfectant, specifically for hospitals, veterinary establishments, dairies, milking parlors, breweries, air-conditioning units, and pasteurizers in canned food & beverage bottling plants. voir moins | |
| GENOMER* 4259 | Rahn AG | GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components...voir plus GENOMER* 4259 is a new difunctional, tin-free, aliphatic urethane acrylate from RAHN with low viscosity and high reactivity. This product has excellent formulation latitude owing to its low viscosity and compatibility with other traditional UV components. Cured alone, GENOMER* 4259 provides high hardness and modulus, excellent impact resistance and exceptional light stability for use in outdoor applications. It also combines good toughness and excellent optical clarity with high chemical resistance and excellent abrasion resistance. voir moins | Request Sample |
| DESMODUR® VL R 10 | Covestro | An aromatic polyisocyanate based on diphenylmethane diisocyanate used in combination with suitable low-viscosity Desmophen products to formulate solvent-free spray coatings and sealing compounds. | |
| DESMODUR® VL R 20 | Covestro | An aromatic polyisocyanate based on diphenylmethane diisocyanate used in combination with suitable low-viscosity Desmophen products to formulate solvent-free spray coatings and sealing compounds. | |
| NexSil™ 125K-40 | Nyacol Nano Technology | NexSil™ 125K-40 is a colloidal silica at a 40% SiO2 concentration in water. A large particle product, it is primarily intended as an abrasive for formulated polishing slurries. | |
| DYHARD® RF1000 | AlzChem | DYHARD® RF1000 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| BLUESIL RES 8152P | Elkem Silicones | BLUESIL RES 8152P is a 50% solids methylphenylsilicone resin in Toluene solution. This resin is designed to formulate heat resistant coatings for industrial applications with improved weatherability. | |
| LumiSet™ LSR-141 | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming r...voir plus LumiSet™ LSR-141 is a urethane methacrylate polymeric resin designed for use in base and color coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-141 is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of adhesion and durability from nail gels while also achieving a tack-free finish, without the need for UV or LED lamps. The combination of excellent adhesion, flexibility, and toughness offers formulators an alternative to other leachable plasticizers or potentially toxic adhesion promoters. The excellent adhesion of LSR-141 allows for the combination of color and base coats into one step. Base and color coats formulated with LSR-141 should also be paired with a hydrophobic top coat due to the hydrophilic nature of LSR-141. LSR-141 is INCI registered, and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. voir moins | |
| Economic Parquet Adhesive (Formulation #V44303.2B) | Hoffmann Mineral | This economic parquet adhesive meets the requirements of DIN EN 14293 for “soft” adhesives. It features SILLITIN V 85, SILLITIN Z 86 or PURISS SILFIT Z 91. | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...voir plus DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...voir plus DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DEGACRYL® HS 4150 E | Evonik Operations GmbH, BL Coating & Adhesive Resins | DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyeth...voir plus DEGACRYL® HS 4150 E is an organic dispersion of copolymers on methacrylic esters and olefins basis. It is recommended as an universal binder for heat seal lacquers for sealing aluminium foil or PET film versus polypropylene (PP), polystyrene (PS), polyethylene therephthalate (PET) or vinyl (PVC). DEGACRYL® HS 4150 E will give good adhesion to aluminium in formulation with PVC-copolymer. Primered with polyester like DYNAPOL® L 206 or 208[1] adhesion to PET is achieved. voir moins | Request Sample |
| BIANCO FISSO M1.5 | DKSH | BIANCO FISSO M1.5 is a high-quality, versatile product designed for enhancing the brightness and opacity of paints, plastics, and paper. Crafted from premium barium sulfate, this product offers exceptional performance and durability. Its unique formulatio...voir plus BIANCO FISSO M1.5 is a high-quality, versatile product designed for enhancing the brightness and opacity of paints, plastics, and paper. Crafted from premium barium sulfate, this product offers exceptional performance and durability. Its unique formulation ensures superior dispersion, providing a smooth, uniform finish. BIANCO FISSO M1.5 is perfect for those seeking to achieve professional-grade results in their projects. With its excellent light reflectance and weather resistance, it's the ideal choice for both indoor and outdoor applications. voir moins | Request Sample |
| NexSil™ 85K-40 | Nyacol Nano Technology | NexSil™ 85K-40 is a colloidal silica of 50 nm colloidal silica at a 40% SiO2 concentration in water. This product is used as an abrasive for formulated polishing slurries. | |
| Epokukdo YU-300 | Kukdo Chemical Co., Ltd. | Epokukdo YU-300 is a epoxy modified polyol as Isocyanate curing type. Especially, it has a low temperature curing property and used in formulating for anti-corrosive paint. | |
| DYHARD® Fluid 151 | AlzChem | DYHARD® Fluid 151 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| DYHARD® Fluid AC11 | AlzChem | DYHARD® Fluid AC11 is part of a fully formulated latent epoxy resin system, which has been specifically designed for resin transfer molding applications. | |
| SYNTHEBOND™ 7656 | Synthomer | SYNTHEBOND™ 7656 is an acrylic emulsion polymer designed for formulating pressure sensitive adhesives for UL181B HVAC tapes. It demonstrates high cohesion and good instant peel. | |
| Desmodur® BL 4265 SN | Covestro | Desmodur® BL 4265 SN is a blocked, aliphatic polyisocyanate based on IPDI ideal for use in combination with polyol components to formulate lightfast one-component stoving coatings. | |
| LumiSet™ LSR-241P | Bomar, formerly Dymax Oligomers & Coatings | LumiSet™ LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin th...voir plus LumiSet™ LSR-241P is a hydrophobic urethane methacrylate resin designed for use in top coat applications for hybrid and long-wear nail lacquers. Synthesized using building blocks from nail gel chemistries, LSR-241P is a solvent-borne film-forming resin that can offer nail lacquer formulators the benefits of impact resistance and durability from nail gels while also achieving a tack-free finish without the need for UV or LED lamps. The combination of toughness, and hydrophobicity offers formulators an alternative to leachable plasticizers or potentially toxic gloss enhancers. Top coats formulated with LSR-241P should be paired with an adhesion-promoting base coat or base/color coat combo to ensure proper adhesion to the nail bed. LSR-241P is INCI registered and can be formulated to cure with sunlight exposure using appropriate INCI-registered photoinitiators. Adding cellulosic film formers to this neat polyurethane resin increases the tack free dry time to acceptable nail lacquer dry times of two minutes or less. voir moins | |
| Desmodur® BL 2078/2 | Covestro | Desmodur® BL 2078/2 is a blocked aliphatic polyisocyanate based on IPDI. It is used in combination with OH-functional polyols, preferably Desmophen T-grade OH-functional polyesters, in the formulation of lightfast, one-component polyurethane baking coatin...voir plus Desmodur® BL 2078/2 is a blocked aliphatic polyisocyanate based on IPDI. It is used in combination with OH-functional polyols, preferably Desmophen T-grade OH-functional polyesters, in the formulation of lightfast, one-component polyurethane baking coatings, especially in coil and can coating applications, and as an additive to conventional baking systems to improve adhesion and elasticity. This product is a crosslinking agent certified for use in food contact applications*) for the production of packaging coatings for the food industry. voir moins | |
| Polychloroprene Adhesive (Formulation #RRS 2202) | Hoffmann Mineral | This polychloroprene adhesive SILLITIN Z 86 PURISS or AKTISIL PF 777. | |
| Decision and Strategy Analysis | Automaxion | Automaxion ensures companies that want to automate their chemical laboratories get an independent, experienced and creative assessment of their needs and recommendations on how to proceed. Dr Bysouth has performed such feasibility studies for a number of ...voir plus Automaxion ensures companies that want to automate their chemical laboratories get an independent, experienced and creative assessment of their needs and recommendations on how to proceed. Dr Bysouth has performed such feasibility studies for a number of high profile companies now performing High Throughput Formulation using systems requiring an investment of up to $8 million, and worked with provider companies to demonstrate or improve their product performance. Automaxion adds value for its customers by providing assurance that HTFS will provide the expected return on investment. voir moins |  |
| Aquarez EVA T25 | Aquaspersions | Aquarez EVA T25 is a water-based emulsion of a tackified, EVA-methacrylic acid terpolymer. This product has a fine particle size and narrow distribution, and exhibits excellent adhesion to a wide variety of substrates, including polypropylene, PVC, paper...voir plus Aquarez EVA T25 is a water-based emulsion of a tackified, EVA-methacrylic acid terpolymer. This product has a fine particle size and narrow distribution, and exhibits excellent adhesion to a wide variety of substrates, including polypropylene, PVC, paper and aluminum. It can be used as the base for the formulation of low-activation temperature heat-seal coatings. Aquarez EVA T25 comes in a low-viscosity, water-based form and exhibits excellent storage stability and high emulsion stability in the finished product. voir moins | |
| BR-742M | Bomar, formerly Dymax Oligomers & Coatings | BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nai...voir plus BR-742M is a medium molecular weight, difunctional aliphatic polyester urethane methacrylate offering excellent adhesion, flexibility, and hardness balance. BR-742M offers an excellent balance of gloss, low heat generation, low color, and low MeHQ for nail coating applications. It can also be effectively formulated for adhesion to steel, aluminum, and glass. Due to its low solvent resistance, it can be formulated into solvent strippable temporary coatings. This material has low skin sensitivity for dental and cosmetic applications. voir moins | |
| Domide GX-533 | Kukdo Chemical Co., Ltd. | Domide GX-533 is a Polyamidoamine / Epoxy adduct designed for the product cured at room temperature in formulating for high performance coatings. In addition, it is well suited for use in the production of primers and maintenance coatings. | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| GENOCURE* EMK | Rahn AG | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...voir plus GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. voir moins | Request Sample |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...voir plus DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...voir plus DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...voir plus DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...voir plus DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...voir plus DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...voir plus DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...voir plus DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DESMODUR® BL 3175 SN | Covestro | A blocked, aliphatic polyisocyanate based on HDI. Ideal for use in combination with Desmophen grades to formulate lightfast, one-component polyurethane stoving coatings; as an additive in conventional stoving systems to improve flexibility and adhesion. | |
| DESMOPHEN® VP LS 2089 | Covestro | A hydroxyl-bearing polyester used in combination with Desmodur N 75, N 3390 and N 3600 to formulate two component polyurethane coatings with good light stability, chalking resistance and gloss retention. | |
| Razeentint PB 7 | Jubail Chemical Industries Co. | Razeentint PB 7 is a black tinting paste formulated with organic and inorganic pigments with a viscosity of 5,000-12,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PG 7 | Jubail Chemical Industries Co. | Razeentint PG 7 is a green tinting paste formulated with organic and inorganic pigments with a viscosity of 6,000-12,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PR 101 | Jubail Chemical Industries Co. | Razeentint PR 101 is a red tinting paste formulated with organic and inorganic pigments with a viscosity of 8,000-13,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| Razeentint PY 42 | Jubail Chemical Industries Co. | Razeentint PY 42 is a yellow tinting paste formulated with organic and inorganic pigments with a viscosity of 1,000-3,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| COPONYL™ 5706-A | Nippon Gohsei | COPONYL™ 5706-A is a pressure sensitive adhesive resin formulated from acrylic acid ester using toluene and cellosolve solvents. It is ideal for screen coatings. This product is well suited for use in adhesives. | |
| RHEOBYK-425 | BYK | RHEOBYK-425 is a liquid, VOC-free rheology additive for aqueous systems to set the in-can viscosity and to improve the anti-sagging and anti-settling properties. It is suitable for all kinds of aqueous coatings, printing inks, and adhesives in order to im...voir plus RHEOBYK-425 is a liquid, VOC-free rheology additive for aqueous systems to set the in-can viscosity and to improve the anti-sagging and anti-settling properties. It is suitable for all kinds of aqueous coatings, printing inks, and adhesives in order to improve the anti-sagging properties and set the required in-can viscosity of the formulation. The resulting increase in viscosity simultaneously improves the storage stability with reduced settling. When grinding pigment pastes, the additive can also increase the millbase viscosity and therefore improve the dispersion conditions. voir moins | |
| Razeentint PB 15:4 | Jubail Chemical Industries Co. | Razeentint PB 15:4 is a blue tinting paste formulated with organic and inorganic pigments with a viscosity of 4,000-10,000. This product is used to color solvent-free and water-based epoxy systems as well as adhesives. | |
| KISAMID® 1036 | Paksoy Kimyevi Maddeler San. ve Tic. A.S. | KISAMID® 1036 is a formulated polyamine adduct hardener. This hardener has an amine value of 310 to 335. It is used in solvent free coatings and epoxy mortars requiring chemical resistance and good surface properties. | |
| KISAMID® 1038 | Paksoy Kimyevi Maddeler San. ve Tic. A.S. | KISAMID® 1038 is a Formulated polyamine adduct hardener. This hardener has an amine value of 360 to 400. It is used in solvent free coatings and self-leveling epoxy mortars and fillers requiring a high reactivity. | |
| Rolflex® BK36 | DKSH | Rolflex® BK 36 has high stability at room temperature and can be formulated with waterborne polyurethane or acrylic resins to obtain compounds with long pot-life. It can be applied by padding, coating, or printing. | Request Sample |
| Hollow Glass Microspheres | Cospheric LLC | Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microsp...voir plus Hollow Glass Microspheres, also called bubbles, microbubbles, or microballoons, are typically made out of borosilicate- sodalime glass blend formulation and provide the benefits of low density, high heat and chemical resistance. The walls of glass microspheres are rigid and typically have the thickness of 10% of the diameter of the sphere. The crush strength of the hollow spheres is determined by the thickness of the walls and, as expected, the higher the sphere density the higher the crush strength. The lightweight hollow glass spheres are chemically stable, noncombustible, nonporous, and have excellent water resistance. voir moins | |
| 2K-PU Flooring (Formulation #V 44409.0) | Hoffmann Mineral | This 2K-PU Flooring is flexible, self-leveling, and solvent-free. It features SILLITIN Z 86. | |
| Desmodur® BL 1100/1 | Covestro | Desmodur® BL 1100/1 is a blocked aromatic polyisocyanate based on TDI. Ideal for use in combination with cycloaliphatic diamines such as Laromin C 260 (BASF) to formulate highly flexible, one-component stoving coatings. |
