| SIB1817.0 | Gelest, Incorporated | Additive to formulations that enhances adhesion. | |
| SIA0589.0 | Gelest, Incorporated | Comonomer for silicones in textile softeners and haircare formulations. | |
| Polymer ST 61 | Evonik Operations GmbH, BL Silanes | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| Polymer ST 61 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high ...voir plus Polymer ST 61 is a high quality polymer which is used for wood floor adhesive formulations. Polymer ST 61 allows a high degree of flexibility for the formulations: adhesives with high strength and hardness are possible as well as soft adhesives with high elasticity. voir moins | |
| DYHARD® Fluid 111 | AlzChem | DYHARD® Fluid 111 is a liquid latent curing agent for thermosetting epoxy resin formulations. | |
| Polimelt P88 | Respol Resinas | Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg...voir plus Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg of potassium hydroxide per gram. voir moins | |
| Coadis™ 173 | Arkema Rheology & Specialty Additives | Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations s...voir plus Coadis™ 173 is a versatile polyacid dispersing agent imparting an excellent performance accross a wide range of waterborne paint formulations. It is designed for flat to semi-gloss paints, anticorrosion paints, caulks and sealants and other formulations showing high rates of mineral pigments and requiring a limited water absorption. Also suitable for oxide pigments and more specifically zinc oxides. voir moins | Request Sample |
| Rheotech™ 3900 | Arkema Rheology & Specialty Additives | Rheotech™ 3900 is an associative acrylic thickener designed to improve both the rheology and the color acceptance of water based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paint...voir plus Rheotech™ 3900 is an associative acrylic thickener designed to improve both the rheology and the color acceptance of water based formulations. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by bush, especially for finishing touches. Rheotech™ 3900 ensures safe additions of colorants in water based formulations, limiting viscosity changes and rub-out issues. Rheotech™ 3900 can be used in every kind of alkaline water based formulation and particulary in solvent and Alkyl Phenol Ethoxylate (APE) free formulations. voir moins | Request Sample |
| SURFYNOL® DF-695 | Evonik Operations GmbH, BL Interface & Performance | A silicone emulsion defoamer, which provides initial and sustained defoaming performance in water-based formulations. 100% active liquid. | |
| Rheotech™ M 03 | Arkema Rheology & Specialty Additives | Rheotech™ M 03 is a highly effective associative acrylic thickener especially designed for water-based putties and textured coating formulations. Rheotech™ M 03 provides high viscosities at low and medium shear rate with a good shear thinning behaviour. I...voir plus Rheotech™ M 03 is a highly effective associative acrylic thickener especially designed for water-based putties and textured coating formulations. Rheotech™ M 03 provides high viscosities at low and medium shear rate with a good shear thinning behaviour. It is therefore giving a good body and high build to formulations while exhibiting ease of application. voir moins | Request Sample |
| SiSiB® PC7410 | SiSiB SILICONES | SiSiB® PC7410 is a colorless transparent liquid. It is used as a neutral curing agent in silicone sealant formulations. | |
| Viscoatex™ 100 S | Arkema Rheology & Specialty Additives | Viscoatex™ 100 S is a powerful acrylic thickener. The high-viscosity formulations made with Viscoatex™ 100 S exhibit a smooth and easy flow. Primarily designed for water-based systems, it can also be used to thicken solvent-based formulations such as alco...voir plus Viscoatex™ 100 S is a powerful acrylic thickener. The high-viscosity formulations made with Viscoatex™ 100 S exhibit a smooth and easy flow. Primarily designed for water-based systems, it can also be used to thicken solvent-based formulations such as alcohol gels or petroleum-based solvents as long as it is used in combination with a polar solvent. voir moins | Request Sample |
| RHEOLATE® FX 1100 | Elementis | RHEOLATE® FX 1100 is a high efficiency polyether polyurethane thickener developed for use in waterborne paint and coating systems. RHEOLATE® FX 1100 has been specially designed for use in powdered formulations, such as adhesives, and in aqueous coatings. ...voir plus RHEOLATE® FX 1100 is a high efficiency polyether polyurethane thickener developed for use in waterborne paint and coating systems. RHEOLATE® FX 1100 has been specially designed for use in powdered formulations, such as adhesives, and in aqueous coatings. The product is supplied as a white free-flowing powder and enables formulations of odourless paints free of organic solvent. voir moins | |
| SiSiB® PC7133 | SiSiB SILICONES | SiSiB® PC7133 is a colorless or yellowish transparent liquid. It is used as a neutral curing agent in silicone sealant formulations. | |
| SiSiB® PC7530 | SiSiB SILICONES | SiSiB® PC7530 is a colorless or yellowish transparent liquid. It is used as a neutral curing agent in silicone sealant formulations. | |
| Ketjenflex® MS 80 | Axcentive Sarl | Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations...voir plus Ketjenflex® MS 80 is a toluene sulfonamide in the form of a transparent liquid. it is used as a plasticizing co-resin in butyl acetate for coatings, adhesives, and inks. Ketjenflex® MS 80 is the liquid version of Ketjenflex® MH and can easily be poured into desired formulations. It has applications in nitrocellulose coatings, cellulose acetate formulations, and printing inks. voir moins | |
| SiSiB® PC7500 | SiSiB SILICONES | SiSiB® PC7500 is a used as a colorless or yellowish transparent liquid. It is a neutral curing agent in silicone sealant formulations. | |
| Desmophen® NH 1521 | Covestro | Desmophen® NH 1521 is an amino-functional co-reactant for polyisocyanates used for the manfuacture of high-solids, two-component polyurethane coating formulations. | |
| SIB1817.0 | Gelest, Incorporated | Additive to silane coupling agent formulations that enhances hydrolytic stability. Employed in corrosion resistant coatings/primers for steel and aluminum. Forms mesoporous, derivatizeable molecular sieves. | |
| Bisomer® PTE | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular wei...voir plus Bisomer® PTE is widely used in activating MMA based acrylic resins; styrene based unsaturated polyesters and vinyl ester methacrylate formulations. This product has an amine value of 250-264mg KOH/g, a Gardner colour number of 15 max., and a molecular weight (av) of 217g/mol. Bisomer® PTE is an aromatic tertiary amine used as an amine activator for organic peroxide initiation, ideal for use in formulations using dibenzoyl peroxide (BPO). It has reduced toxicity. Bisomer® PTE is extensively used to activate MMA based acrylic resins, styrene-based unsaturated polyesters and vinyl ester methacrylate formulations. It is ideal in a wide range of applications, including acrylic flooring, adhesives, chemical fixings, road-marking paints, anchor bolts and chemical mortars. voir moins | |
| SiSiB® PC7131 | SiSiB SILICONES | SiSiB® PC7131 is a clear and almost colorless fluid with a typical smell (MEKO). It is used as a neutral curing agent in silicone sealant formulations. | |
| SiSiB® PC7510 | SiSiB SILICONES | SiSiB® PC7510 is a clear and almost colorless fluid with a typical smell (MEKO). It is used as a neutral curing agent in silicone sealant formulations. | |
| SiSiB® PC7400 | SiSiB SILICONES | SiSiB® PC7400 is clear and almost colorless fluid with a typical solvent smell (Toluene). It is used as a neutral curing agent in silicone sealant formulations. | |
| DABCO® MB 20 | Evonik Operations GmbH, BL Comfort & Insulation | DABCO® MB 20 is a bismuth-based gel catalyst developed for a wide range of urethane formulations. It does not contain 2-EHA, DBT or TBT. | |
| D-35 | BlueSky Chemical Co., Ltd. | D-35 is a tetra-oximino silane in toluene. This product is a neutral curing agent for silicone sealant formulations. Its density at 25 degrees Celsius is 0.930 g/ml. | |
| Texicryl® 13-308 | Scott Bader | Texicryl® 13-308 is a carboxylated acrylic copolymer emulsion designed as a thickener for water-based formulations. It is used in the formulation of paints, waterborne coating systems, and ceramic tile adhesives. | |
| LAPONITE® SL25 | BYK | LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations...voir plus LAPONITE® SL25 is a ready-for-use liquid dispersion of synthetic layered silicate modified with a patented dispersing agent. Supplied at 25% solids content in water, LAPONITE® SL25 is a translucent and colourless low viscosity liquid dispersion. On addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. voir moins | |
| D-101 | BlueSky Chemical Co., Ltd. | D-101, also known as tetramethoxysilane, can be used to provide a scratch-resistant coating and impact modifiers for glass. It can also be used as a drying agent in sealing formulations. | |
| SURFYNOL® DF-62 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | Ether-modified, silicone defoamer designed to provide excellent knockdown defoaming and sustained antifoaming over time in a variety of waterborne formulations. Useful when long-term defoamer efficacy is needed. 100% active liquid. | |
| DYHARD® UR200 | AlzChem | DYHARD® UR200 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300 | AlzChem | DYHARD® UR300 represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| DYHARD® UR300AB | AlzChem | DYHARD® UR300AB represents a latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| SARBIO 7102 | Sartomer Americas | SARBIO 7102 is a polyester acrylate with a minimum BRC (BioRenewable Carbon Content) of 10%. It is particularly suitable for ink applications. It offers excellent pigment wetting, very good water balance and excellent flow to formulations. | |
| DYHARD® MI-C | AlzChem | DYHARD® MI-C is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® MI-FF | AlzChem | DYHARD® MI-FF is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It is typically used for fast curing, or low temperature cure, resin systems with low latency requirements. | |
| DYHARD® UR800 | AlzChem | DYHARD® UR800 represents a very latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. | |
| Rheotech™ M 02 | Arkema Rheology & Specialty Additives | Rheotech™ M 02 is a highly effective associative acrylic based thickener specifically designed for putty and textured coatings formulations Rheotech™ M 02 provides high viscosities at low and medium shear rates and outstanding resistance to crushing. | Request Sample |
| SURFYNOL® DF-58 DEFOAMER | Evonik Operations GmbH, BL Interface & Performance | A silicone-based foam control agent useful in aqueous systems. It has strong foam control and deairation performance. Developed for use in water-based coating and ink formulations where strong, rapid defoaming is required. 100% active liquid. | |
| Coapur™ 2020 W | Arkema Rheology & Specialty Additives | Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheo...voir plus Coapur™ 2020 W is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyrethane thickener designed for water based formulations. Coapur™ 2020 W can be used sole or in combination either with other polyrethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ 2020 W is a pure associative thickener. It is designed to interact strongly with the blinder of the formulation, in order to control the rheology at high shear rates. Coapur™ 2020 W helps to match the highest coating quality possible for water-based formulations. voir moins | Request Sample |
| DYHARD® DF50EP | AlzChem | DYHARD® DF50EP is a master batch of 50% DYHARD® 100SF in standard bisphenol A epoxy resin (EEW 182-192). Products of the DYHARD® master batches are widely used for all kinds of one component thermosetting epoxy resin formulations | |
| LAPONITE® S482 | BYK | LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations...voir plus LAPONITE® S482 is a synthetic layered silicate modified with a patented dispersing agent. It hydrates and swells in water to give translucent and colourless colloidal liquid dispersions known as sols. At 25% solids concentration in water, these will remain free flowing for up to 1 year. On addition of small quantities of electrolyte, or on addition to formulations containing e.g. resins, surfactants or pigments, highly thixotropic gels are formed rapidly. It is used to impart a shear sensitive structure to a wide range of waterborne formulations including DIY and industrial surface coatings, household cleaners, ceramic and agrochemical products. voir moins | |
| Texipol® 63-303 | Scott Bader | Texipol® 63-303 is a high solids inverse emulsion polymer that has high efficiency and is used in a variety of water-based formulations. It can be used as a thickening PVA bonding aid and in construction and industrial adhesives. | |
| D-90 | BlueSky Chemical Co., Ltd. | D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/m...voir plus D-90 is a vinyltris (methylethylketoxime) silane. This product is a neutral curing agent that can be used in silicone sealant formulations. It is usually used in combination with methyloxime silane. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| SiSiB® PC7970 | SiSiB SILICONES | SiSiB® PC7970 is a colorless or yellowish transparent liquid. It is not miscible with water and instead decomposes with water and moisture under formation of acetic acid. It is used as a raw material (crosslinker) for acetoxy crosslinking RTV-1 sealant formulations...voir plus SiSiB® PC7970 is a colorless or yellowish transparent liquid. It is not miscible with water and instead decomposes with water and moisture under formation of acetic acid. It is used as a raw material (crosslinker) for acetoxy crosslinking RTV-1 sealant formulations. voir moins | |
| Proviplast 2624 | Proviron | Proviplast 2624 is a citrate ester with a broad field of applications, mainly used as plasticizer, to prepare flavours, in essence formulations and cosmetics. Due to its versatility, low volatility and safety, Proviplast 2624 can help in replacing phthal...voir plus Proviplast 2624 is a citrate ester with a broad field of applications, mainly used as plasticizer, to prepare flavours, in essence formulations and cosmetics. Due to its versatility, low volatility and safety, Proviplast 2624 can help in replacing phthalates in numerous applications. voir moins | |
| GENORAD* 23 | Rahn AG | GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations...voir plus GENORAD* 23 is the latest complement to the RAHN stabilizer range. GENORAD* 23 is an excellent all-purpose in-can stabilizer for radically curable inks, coatings and adhesives. GENORAD* 23 acts as a polymerization inhibitor and improves shelf-life of UV curable formulations. voir moins | Request Sample |
| DYHARD® URAcc13 | AlzChem | DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations...voir plus DYHARD® URAcc13 represents a formulated latent, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| BYK®-348 | BYK | BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage ...voir plus BYK®-348 is a polyether modified siloxane. This product is especially suitable for solvent-free aqueous formulations (zero-VOC-systems). These additives should normally be added to the finished paint. If necessary, however, they can be added at any stage of the production process. voir moins | |
| D-92 | BlueSky Chemical Co., Ltd. | D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density ...voir plus D-92 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| DYHARD® MIA5 | AlzChem | DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master...voir plus DYHARD® MIA5 is used as a very active but also reasonably latent accelerator in thermosetting epoxy resin formulations. It’s use is particularly suited in combination with micronized dicyandiamide from the DYHARD® CU-Line, or with the dicyandiamide master batches from the DYHARD® MB-Line. voir moins | |
| DYHARD® UR400 | AlzChem | DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations...voir plus DYHARD® UR400 represents a bi-functional, micronized accelerator based on a substituted urea. Being an active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| Drying additive 3A (Paste 60) | Castor International BV | Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations...voir plus Drying additive 3A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption of 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. voir moins | |
| Drying additive 3A (Paste 50) | Castor International BV | Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations...voir plus Drying additive 3A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption of 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. voir moins | |
| Drying additive 4A (Powder) | Castor International BV | Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations...voir plus Drying additive 4A (Powder), centered on a zeolite-mineral, is a bright paste with a water absorption of approximately 28%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. voir moins | |
| Drying additive 3A (Powder) | Castor International BV | Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations...voir plus Drying additive 3A (Powder), centered on a zeolite-mineral, is a bright powder with a water absorption of 22% to 23%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. voir moins | |
| Ecodis™ NP | Arkema Rheology & Specialty Additives | Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders, and inorganic pigments. It enables to achievement of mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating tools. Ecodis™ NP is particularly adapted for the dispersion of fine calcium carbonates, clays, and high value pigments such as titanium dioxide across a wide range of water-based formulations. It ensures very good storage stability even for formulations...voir plus Ecodis™ NP is designed to disperse and stabilize a wide range of fillers, extenders, and inorganic pigments. It enables to achievement of mill bases with a high solids content and simultaneously a low viscosity using the most common stirrers or deflocculating tools. Ecodis™ NP is particularly adapted for the dispersion of fine calcium carbonates, clays, and high value pigments such as titanium dioxide across a wide range of water-based formulations. It ensures very good storage stability even for formulations stored for a long time at higher temperatures, which is not the case of inorganic additives such as phosphate-based dispersants. Ecodis™ NP contributes to reducing formulation costs thanks to its high effectiveness and to the reduction of grinding time. voir moins | Request Sample |
| D-91 | BlueSky Chemical Co., Ltd. | D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's de...voir plus D-91 is a blend of vinyltris (methyl ethylketoxime) silane and tetrakis (methyl ethylketoxime) silane. This product is a neutral curing agent for silicone sealant formulations. It is usually used in combination with methyloxime silanes. This product's density at 25 degrees Celsius is 0.99 g/ml. voir moins | |
| Drying additive 4A (Paste 60) | Castor International BV | Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations...voir plus Drying additive 4A (Paste 60), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 13%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. voir moins | |
| Drying additive 4A (Paste 50) | Castor International BV | Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations...voir plus Drying additive 4A (Paste 50), centered on a zeolite-mineral, is a bright paste with a water absorption greater than 11%. It is used as drying additive (absorbent) in coatings, plastics, and lacquers. The most common application is the handling of polyurethane formulations with the drying additive. voir moins | |
| Pangel M100 | Tolsa, S.A. | Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, em...voir plus Pangel M100 is a thickening and anti-settling agent made of purified bentonite clay. It is developed to give water-borne formulations with stability, viscosity and adhesion control as well as texturing and surface finishing. It is used for adhesives, emulsion paints, textural paints, and bituminous emulsion. voir moins | |
| Pangel M150 | Tolsa, S.A. | Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can...voir plus Pangel M150 is a thickening and anti-setting agent made of purified bentonite clay. It was developed for providing water-borne formulations with stability and viscosity control, sedimentation and sagging control, workability, and water retention. It can be used for adhesives, bituminous emulsion, and seed coatings. voir moins | |
| DYHARD® UR500 | AlzChem | DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations...voir plus DYHARD® UR500 represents a bi-functional, micronized accelerator based on a substituted urea. Being a highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| DYHARD® URAcc57 | AlzChem | DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations...voir plus DYHARD® URAcc57 represents a latent, micronized accelerator based on a substituted urea. Being a very highly active as well as a latent accelerator, its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. voir moins | |
| Dynasylan® P | Evonik Operations GmbH, BL Silanes | Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations...voir plus Dynasylan® P is mostly used as crosslinker for silicones. Dynasylan® P is a special silicic acid ester. It is mainly used as crosslinker in the silicone industry. Dynasylan® P can be further used as precursor for inorganic binders and as basic ingredient in sol-gel formulations. voir moins | |
| Tergum T385 | Respol Resinas | Tergum T385 is a gum rosin that has been esterified with glycerol. This product can be used in adhesive formulations that require increased tack. Its softening point ranges between 80-86 degrees Celsius and its acid value is less than 12 mg of potassium...voir plus Tergum T385 is a gum rosin that has been esterified with glycerol. This product can be used in adhesive formulations that require increased tack. Its softening point ranges between 80-86 degrees Celsius and its acid value is less than 12 mg of potassium hydroxide per gram. voir moins | |
| Texicryl® 13-312 | Scott Bader | Texicryl® 13-312 is a carboxylated acrylic copolymer emulsion thickener designed for use in water-based formulations. It is very effective in producing a stable viscosity response between pH 6.5 to 10. Texicryl® 13-312 is used in the formulation of const...voir plus Texicryl® 13-312 is a carboxylated acrylic copolymer emulsion thickener designed for use in water-based formulations. It is very effective in producing a stable viscosity response between pH 6.5 to 10. Texicryl® 13-312 is used in the formulation of construction adhesives, textured coatings, paints and waterborne coating systems. voir moins | |
| Trixene SC 7906 | Baxenden Chemicals Ltd. | Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations...voir plus Trixene SC 7906 is a urethane bisoxazolidine that readily reacts with water and will undergo chain extension and cross-linking with moisture-cure, pre-polymer coatings. It tends to crystallize on storage, although it can be melted out before its formulations are used in high-build, void-free coatings. voir moins | |
| Rheotech™ 4000 LC | Arkema Rheology & Specialty Additives | Rheotech™ 4000 LC is a low carbon footprint HASE thickener designed to improve both the rheology and the color acceptance of water-based formulations. Rheotech™ 4000 LC exhibits a carbon footprint reduction of more than 15% compared to standard HASE thick...voir plus Rheotech™ 4000 LC is a low carbon footprint HASE thickener designed to improve both the rheology and the color acceptance of water-based formulations. Rheotech™ 4000 LC exhibits a carbon footprint reduction of more than 15% compared to standard HASE thickeners with no compromise on performance. Its outstanding effectiveness at medium shear rates allows to control very easily the perceived quality of paints during handling and to facilitate coating by roll or by bush, especially for finishing touches. Rheotech™ 4000 LC ensures safe additions of colorants in water-based formulations, limiting viscosity changes and rub-out issues. Rheotech™ 4000 LC can be used in every kind of alkaline water-based formulation particularly in solvent and Alkyl Phenol Ethoxylate (APE) free systems. voir moins | Request Sample |
| Organosilane 2A301 | Dalian Onichem Co., Ltd. | Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This p...voir plus Organosilane 2A301 is a biamine functional silane which acts as an adhesion promoter in isocyanate end-capped polyurethane polymers for sealant, adhesive and coating formulations. It is the best type of aminosilane for crosslinking plasticized PVC. This product is suitable for use with acrylic, isocyanate, polyurethane, ABS, PVC, and styrene polymers. voir moins | Request Sample |
| THIXATROL® AS 8024 | Elementis | THIXATROL® AS 8024 is a finely micronized polyamide rheological additive. This product is recommended for the use in solvent-borne and solvent-free medium to higher polar liquid organic systems. The product is suitable as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties, and other formulations...voir plus THIXATROL® AS 8024 is a finely micronized polyamide rheological additive. This product is recommended for the use in solvent-borne and solvent-free medium to higher polar liquid organic systems. The product is suitable as a thickener, thixotropic or anti-settling agent in paints and coatings, adhesives, sealants and putties, and other formulations. voir moins | |
| Pangel M280 | Tolsa, S.A. | Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties...voir plus Pangel M280 is a thickening and anti-setting agent made of purified bentonite clay. It is developed to provide water-borne formulations with stability and viscosity control, adhesion control, texturing and stippling effects, and strong binding properties. It can be used for adhesives, emulsion paints, bituminous emulsion, textural paints, and granulation and agglomeration. voir moins | |
| DEE FO® 2020E/50 | Munzing Chemie | DEE FO® 2020E/50 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It has high persistence and is specifically designed for use in most emulsion systems, including EVA, VA, and acrylic formulations. It is commonly used ...voir plus DEE FO® 2020E/50 is a liquid opaque off-white defoamer that is a blend of special wax and mineral oil. It has high persistence and is specifically designed for use in most emulsion systems, including EVA, VA, and acrylic formulations. It is commonly used PSA, laminating, packaging, envelope and construction adhesives. voir moins | |
| DYHARD® UR700 | AlzChem | DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addit...voir plus DYHARD® UR700 represents a highly latent, micronized accelerator based on a substituted urea. Its prominent use is preferably in combination with the highly latent curing agents of the DYHARD® 100 series in thermosetting epoxy resin formulations. In addition, DYHARD® UR700 is soluble in water, which makes it a preferred accelerator for waterborne applications. voir moins | |
| TIB KAT® 318 | TIB Chemicals | TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. This product improves pot life and can be used in 1p- and 2p- PU formulations...voir plus TIB KAT® 318 is a catalyst which can be used in various applications, including as a catalyst of esterification and transesterification reactions. It is also used for the catalysis of the reaction between isocyanates and alcohols especially for coatings. This product improves pot life and can be used in 1p- and 2p- PU formulations. voir moins | Request Sample |
| SiSiB® PC7950 | SiSiB SILICONES | SiSiB® PC7950 is a colorless or yellowish transparent liquid with an acrid odor of acetic acid (vinegar). It hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce siloxanes or bind to inorganic substrates. It is used as a curing agent in acetoxy crosslinking RTV-1 sealant formulations...voir plus SiSiB® PC7950 is a colorless or yellowish transparent liquid with an acrid odor of acetic acid (vinegar). It hydrolyzes in the presence of moisture to form silanols, which can react with themselves to produce siloxanes or bind to inorganic substrates. It is used as a curing agent in acetoxy crosslinking RTV-1 sealant formulations. voir moins | |
| SIRION® VP 2085 | SIR Industriale SpA | SIRION® VP 2085 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It is compatible with epoxy resins. This product is useful for optimizing the reactivity of powder coating formulations that contain a curing ...voir plus SIRION® VP 2085 is a phenolic hardener based on unmodified solid reaction product of liquid epoxy resin and BPA. It is compatible with epoxy resins. This product is useful for optimizing the reactivity of powder coating formulations that contain a curing accelerator. This product is well suited for use in protective or decorative powder coatings. voir moins | |
| AGITAN® 315 | Munzing Chemie | AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all...voir plus AGITAN® 315 is a liquid yellow, turbid blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is recommended for aqueous emulsion systems, specifically for low odor formulations. It is compatible with all common binders. It is commonly used in printing inks, adhesives, and architectural, industrial and wood coatings. voir moins | |
| Ancamine® 2441 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2441 curing agent is a modified polyamine which was designed for use as a latent curing agentfor onecomponent adhesive formulations. The product can also be used as an accelerator fordicyandiamide (dicy). Its combinatio...voir plus Ancamine® 2441 curing agent is a modified polyamine which was designed for use as a latent curing agentfor onecomponent adhesive formulations. The product can also be used as an accelerator fordicyandiamide (dicy). Its combination of low temperature activation, good shelf life and high glass transitiontemperature permits use in many applications requiring latency and high performance. voir moins | Request Sample |
| SiSiB® PC6310 | SiSiB SILICONES | SiSiB® 6310 is a clear, colorless liquid with a characteristic odor. It can be used in the production of pipes and cables made of silane crosslinked polyethylene (PE-Xb), as a water scavenger during the production of crosslinking adhesive and sealant formulations...voir plus SiSiB® 6310 is a clear, colorless liquid with a characteristic odor. It can be used in the production of pipes and cables made of silane crosslinked polyethylene (PE-Xb), as a water scavenger during the production of crosslinking adhesive and sealant formulations, or as co-monomers in the production of silane-modified binders for surface coatings. voir moins | |
| SiSiB® PC7130 | SiSiB SILICONES | SiSiB® PC7130 is colorless or yellowish transparent liquid. It is used as a neutral curing agent in silicone sealant formulations or as the main crosslinker of choice for oxime silicone sealants that can be used by itself or in combination with other oxi...voir plus SiSiB® PC7130 is colorless or yellowish transparent liquid. It is used as a neutral curing agent in silicone sealant formulations or as the main crosslinker of choice for oxime silicone sealants that can be used by itself or in combination with other oxime silanes to provide the sealant with targeted properties (such as desired cure rate, adhesion etc). voir moins | |
| Andisil OH 750 | AB Specialty Silicones | Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 750 is a clear, slightly hazy colorless silanol terminated fluid (750 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 750 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 1,000 | AB Specialty Silicones | Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 1,000 is a clear, slightly hazy colorless silanol terminated fluid (1,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 2,000 | AB Specialty Silicones | Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 2,000 is a clear, slightly hazy colorless silanol terminated fluid (2,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 2,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 3,500 | AB Specialty Silicones | Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 3,500 is a clear, slightly hazy colorless silanol terminated fluid (3,500 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 3,500 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 4,000 | AB Specialty Silicones | Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 4,000 is a clear, slightly hazy colorless silanol terminated fluid (4,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 4,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 6,000 | AB Specialty Silicones | Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 6,000 is a clear, slightly hazy colorless silanol terminated fluid (6,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 6,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 14,000 | AB Specialty Silicones | Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 14,000 is a clear, slightly hazy colorless silanol terminated fluid (14,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 14,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 20,000 | AB Specialty Silicones | Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 20,000 is a clear, slightly hazy colorless silanol terminated fluid (20,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 20,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 50,000 | AB Specialty Silicones | Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 50,000 is a clear, slightly hazy colorless silanol terminated fluid (50,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 80,000 | AB Specialty Silicones | Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 80,000 is a clear, slightly hazy colorless silanol terminated fluid (80,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 80,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil OH 300,000 | AB Specialty Silicones | Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil OH 300,000 is a clear, slightly hazy colorless silanol terminated fluid (300,000 cps.). It is used in the treatment of fillers and as an anti-structuring additive. Andisil OH 300,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOH 1,000 | AB Specialty Silicones | Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil MOH 1,000 is a clear, slightly hazy colorless monofunctional silanol polymer (1,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 1,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOH 10,000 | AB Specialty Silicones | Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil MOH 10,000 is a clear, slightly hazy colorless monofunctional silanol polymer (10,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 10,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| Andisil MOH 50,000 | AB Specialty Silicones | Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations...voir plus Andisil MOH 50,000 is a clear, slightly hazy colorless monofunctional silanol polymer (50,000 cSt). It is used in the treatment of fillers and as an anti-structuring additive. Andisil MOH 50,000 can be used in high consistency silicone rubber and silicone room temperature vulcanizing formulations. This product is pure and does not contain any plasticizers or additives. voir moins | |
| AGITAN® 305 | Munzing Chemie | AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations...voir plus AGITAN® 305 is a liquid light, turbid blend of modified nonionic fatty compounds and hydrophobic silica with white oils of pharmaceutical grade, free of silicone. It is recommended for aqueous emulsion systems, specifically for low odor and non-polluting formulations. It is compatible with all common binders. It is commonly used in wood coatings, printing inks, and adhesives. voir moins | |
| Octoguard FR-11 DF | Tiarco Chemical | Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations...voir plus Octoguard FR-11 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. voir moins | |
| Octoguard FR-13 DF | Tiarco Chemical | Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations...voir plus Octoguard FR-13 DF is an aqueous anionic dispersion of a halogen and antimony trioxide. It is intended for direct addition to water-based polymer compounds, latex adhesives, binders, coatings, and foams. This product offers high flame retardant effectiveness, high purity, excellent heat stability, and low cost. In many cases, it can be used to create environmentally friendly formulations. voir moins | |
| AGITAN® 260 | Munzing Chemie | AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations...voir plus AGITAN® 260 is a liquid white, turbid blend of modified non-ionic fatty compounds, hydrophobic silica and white oils. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. voir moins | |
| Tergum T390 | Respol Resinas | Tergum T390 is a gum rosin that has been esterified with glycerol. This product can be used in hot-melt adhesive formulations. It increases tack while maintaining thermal stability and resistance to oxidative degradation. Its softening point ranges bet...voir plus Tergum T390 is a gum rosin that has been esterified with glycerol. This product can be used in hot-melt adhesive formulations. It increases tack while maintaining thermal stability and resistance to oxidative degradation. Its softening point ranges between 85-91 degrees Celsius and its acid value is less than 10 mg of potassium hydroxide per gram. voir moins | |
| DEE FO® XRM-1547A | Munzing Chemie | DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV systems. It is also commonly used in printing ink formulations...voir plus DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV systems. It is also commonly used in printing ink formulations, such as film/foil, envelope and metallic. voir moins | |
| AGITAN® 265 | Munzing Chemie | AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations...voir plus AGITAN® 265 is a liquid yellow blend of modified nonionic fatty compounds, hydrophobic silica and white oils of pharmaceutical grade. It is effective defoamer for aqueous emulsion based systems and water reducible systems, as well as being an ideal solution for medium to high viscosity formulations. It is commonly used in architectural, industrial and wood coatings, as well as adhesives. voir moins |
