| Kingcure M-530 | Sanho Chemical Co., Ltd. | Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applic...voir plus Kingcure M-530 is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.16. Kingcure M-530 is most commonly used in primer coating formulation applications. voir moins | |
| Kingcure N-768 | Sanho Chemical Co., Ltd. | Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...voir plus Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. voir moins | |
| Araldite® GY 6020 | Jubail Chemical Industries Co. | Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of...voir plus Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of filament adhesives. voir moins | |
| Synexil® MDP 50 | Synthos S.A. | Synexil® MDP 50 is a water dispersion of vinyl-maleic copolymer produced in an emulsion polymerization process. Synexil® MDP 50 is designed for the formulation of emulsion paints, especially for indoor applications as well as of cement-free masonry, morta...voir plus Synexil® MDP 50 is a water dispersion of vinyl-maleic copolymer produced in an emulsion polymerization process. Synexil® MDP 50 is designed for the formulation of emulsion paints, especially for indoor applications as well as of cement-free masonry, mortars, and plasters. voir moins | |
| EPOSIR® 7161 75 XL | SIR Industriale SpA | EPOSIR® 7161 75 XL is an epoxy resin solution in xylene. It provides good resistance to chemical agents, solvents, and water. This product is well suited for use with hardeners for formulation of general purpose primers for metallic surfaces and anti-corr...voir plus EPOSIR® 7161 75 XL is an epoxy resin solution in xylene. It provides good resistance to chemical agents, solvents, and water. This product is well suited for use with hardeners for formulation of general purpose primers for metallic surfaces and anti-corrosion paints. voir moins | |
| EPOSIR® 7161 75 MP | SIR Industriale SpA | EPOSIR® 7161 75 MP is an epoxy resin solution in methoxypropanol. It provides good resistance to chemical agents, solvents, and water. This product is well suited for use with hardeners for formulation of general purpose primers for metallic surfaces and ...voir plus EPOSIR® 7161 75 MP is an epoxy resin solution in methoxypropanol. It provides good resistance to chemical agents, solvents, and water. This product is well suited for use with hardeners for formulation of general purpose primers for metallic surfaces and anti-corrosion paints. voir moins | |
| EPOSIR® 7170 50 BC SA | SIR Industriale SpA | EPOSIR® 7170 50 BC SA is an epoxy resin solution in butyl glycol/naphtha solvent. It is designed for formulation of anti-corrosion coatings for metallic surfaces and industrial applications. This product is well suited for blending with EPOSIR® 7161 for i...voir plus EPOSIR® 7170 50 BC SA is an epoxy resin solution in butyl glycol/naphtha solvent. It is designed for formulation of anti-corrosion coatings for metallic surfaces and industrial applications. This product is well suited for blending with EPOSIR® 7161 for improved flexibility. voir moins | |
| Kingmide 74 | Sanho Chemical Co., Ltd. | Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation app...voir plus Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation applications. voir moins | |
| Kingmide 315 | Sanho Chemical Co., Ltd. | Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formula...voir plus Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formulation applications. voir moins | |
| Kingmide 338 | Sanho Chemical Co., Ltd. | Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation ap...voir plus Kingmide 338 is a low-viscosity, ractive polyamide resin in a light yellow-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s and a specific gravity of 0.97. Kingmide 338 is most commonly used in adhesive and putty formulation applications. voir moins | |
| Kingmide 705 | Sanho Chemical Co., Ltd. | Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation a...voir plus Kingmide 705 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 150-400 mPa.s and a specific gravity of 0.98. Kingmide 705 is most commonly used in mortar, putty, and adhesive formulation applications. voir moins | |
| Tohmide 245 | Sanho Chemical Co., Ltd. | Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation app...voir plus Tohmide 245 is a polyaminoamide-type epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.96. Tohmide 245 is most commonly used in bonding, sealing, and resin mortar formulation applications. voir moins | |
| Razeen® LR 1100 | Jubail Chemical Industries Co. | Razeen® LR 1100 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1100 is used in the formulation of highly chemical ...voir plus Razeen® LR 1100 is a general purpose, unmodified epoxy resin based on Bisphenol A. This product is characterized by its viscosity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1100 is used in the formulation of highly chemical resistant coatings and matrix adhesives. voir moins | |
| Kingmide 340 | Sanho Chemical Co., Ltd. | Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty form...voir plus Kingmide 340 is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 400-600 mPa.s and a specific gravity of 0.96. Kingmide 340 is most commonly used in coating, mortar, adhesive, and putty formulation applications. voir moins | |
| Tohmide 275 | Sanho Chemical Co., Ltd. | Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive for...voir plus Tohmide 275 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 1200-3200 mPa.s and a specific gravity of 1.02. Tohmide 275 is most commonly used in coating and adhesive formulation applications. voir moins | |
| Tohmide HR-11 | Sanho Chemical Co., Ltd. | Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation appl...voir plus Tohmide HR-11 is a high viscosity, polyaminoamide epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-15,000 mPa.s and a specific gravity of 0.98. Tohmide HR-11 is most commonly used in adhesive formulation applications. voir moins | |
| Tohmide RS-640 | Sanho Chemical Co., Ltd. | Tohmide RS-640 is a high viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 10,000-14,000 mPa.s and a specific gravity of 0.96. Tohmide RS-640 is most commonly used in wood adhesive formulation a...voir plus Tohmide RS-640 is a high viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 10,000-14,000 mPa.s and a specific gravity of 0.96. Tohmide RS-640 is most commonly used in wood adhesive formulation applications. voir moins | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...voir plus Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. voir moins | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...voir plus Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. voir moins | |
| Bayhydrol® HD 2016 | Covestro | Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with othe...voir plus Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with other water-reducible binders. voir moins | |
| Araldite® GY 6010 | Jubail Chemical Industries Co. | Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of c...voir plus Araldite® GY 6010 is a general purpose, unmodified, medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 is used in the formulation of chemical resistant coatings and matrix adhesives. voir moins | |
| TIB KAT® MP | TIB Chemicals | TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA...voir plus TIB KAT® MP is a formulation based on methane sulfonic acid and selected amine components to form a blocked acid catalyst. This product helps provide high efficiency in crosslinking of baking enamels and provides a longer pot life compared to TIB KAT® MSA. voir moins | Request Sample |
| EPOSIR® F 728 | SIR Industriale SpA | EPOSIR® F 728 is a low viscosity, water-dispersible, BPA/BPF based epoxy resin modified with a mono-functional reactive diluent. When combined with aminic hardeners, this product is suited for formulation of two-components epoxy paint and enamels for conc...voir plus EPOSIR® F 728 is a low viscosity, water-dispersible, BPA/BPF based epoxy resin modified with a mono-functional reactive diluent. When combined with aminic hardeners, this product is suited for formulation of two-components epoxy paint and enamels for concrete and anti-corrosion. voir moins | |
| Domide GX-422 | Kukdo Chemical Co., Ltd. | Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for fo...voir plus Domide GX-422 is a Polyamide / Epoxy adduct dissolved in Xylene / n-Butanol for reaction with solid Epoxy Resins. GX-422 is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. voir moins | |
| Tohmide 558 | Sanho Chemical Co., Ltd. | Tohmide 558 is a solid-type fatty polyamide resin in a brown-colored pellet form. This product has a viscosity of 300-850 mPa.s and a softening point of 155-165°C. Tohmide 558 is most commonly used in structural hot-melt adhesive formulation applications. | |
| Kingmide 374-L | Sanho Chemical Co., Ltd. | Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulati...voir plus Kingmide 374-L is a low-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.95. Kingmide 374-L is most commonly used in mortar, adhesive, and putty formulation applications. voir moins | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...voir plus Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. voir moins | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...voir plus Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. voir moins | |
| Kingmide H-110 | Sanho Chemical Co., Ltd. | Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation application...voir plus Kingmide H-110 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Kingmide H-110 is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Kingmide H-120 | Sanho Chemical Co., Ltd. | Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applicatio...voir plus Kingmide H-120 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2200-2800 mPa.s and a softening point of 115-125°C. Kingmide H-120 is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Kingmide H-130 | Sanho Chemical Co., Ltd. | Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applicatio...voir plus Kingmide H-130 is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 125-135°C. Kingmide H-130 is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Kingmide H-130W | Sanho Chemical Co., Ltd. | Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applicat...voir plus Kingmide H-130W is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 2500-5000 mPa.s and a softening point of 125-135°C. Kingmide H-130W is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Kingmide H-140HP | Sanho Chemical Co., Ltd. | Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation appl...voir plus Kingmide H-140HP is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 140-150°C. Kingmide H-140HP is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Kingmide H-170HV | Sanho Chemical Co., Ltd. | Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applic...voir plus Kingmide H-170HV is a high molecular weight polyamide resin in an amber-colored pellet form. This product has a viscosity of 3000-7000 mPa.s and a softening point of 165-175°C. Kingmide H-170HV is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Tohmide TXC-241B | Sanho Chemical Co., Ltd. | Tohmide TXC-241B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 11,000-20,000 mPa.s and a softening point of 95-105°C. Tohmide TXC-241B is most commonly used in hot-melt adhesive formulation appl...voir plus Tohmide TXC-241B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 11,000-20,000 mPa.s and a softening point of 95-105°C. Tohmide TXC-241B is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Tohmide TXC-241F | Sanho Chemical Co., Ltd. | Tohmide TXC-241F is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 11,000-20,000 mPa.s and a softening point of 105-110°C. Tohmide TXC-241F is most commonly used in hot-melt adhesive formulation app...voir plus Tohmide TXC-241F is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 11,000-20,000 mPa.s and a softening point of 105-110°C. Tohmide TXC-241F is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Tohmide TXC-241H | Sanho Chemical Co., Ltd. | Tohmide TXC-241H is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 15,000-25,000 mPa.s and a softening point of 100-110°C. Tohmide TXC-241H is most commonly used in hot-melt adhesive formulation app...voir plus Tohmide TXC-241H is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 15,000-25,000 mPa.s and a softening point of 100-110°C. Tohmide TXC-241H is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Tohmide TXC-243A | Sanho Chemical Co., Ltd. | Tohmide TXC-243A is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 100-110°C. Tohmide TXC-243A is most commonly used in hot-melt adhesive formulation appli...voir plus Tohmide TXC-243A is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 5000-10,000 mPa.s and a softening point of 100-110°C. Tohmide TXC-243A is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Tohmide TXA-265 | Sanho Chemical Co., Ltd. | Tohmide TXA-265 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 140-150°C. Tohmide TXA-265 is most commonly used in hot-melt adhesive formulation applicati...voir plus Tohmide TXA-265 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 2000-4000 mPa.s and a softening point of 140-150°C. Tohmide TXA-265 is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Tohmide TXC-269 | Sanho Chemical Co., Ltd. | Tohmide TXC-269 is a polyamide resin in a brown-colored pellet form. This product has a viscosity of 3000-4000 mPa.s and a softening point of 170-180°C. Tohmide TXC-269 is most commonly used in hot-melt low-pressure molding adhesive formulation applicatio...voir plus Tohmide TXC-269 is a polyamide resin in a brown-colored pellet form. This product has a viscosity of 3000-4000 mPa.s and a softening point of 170-180°C. Tohmide TXC-269 is most commonly used in hot-melt low-pressure molding adhesive formulation applications. voir moins | |
| Tohmide TXC-271 | Sanho Chemical Co., Ltd. | Tohmide TXC-271 is a polyamide resin in a brown-colored pellet form. This product has a viscosity of 500-1200 mPa.s and a softening point of 141-153°C. Tohmide TXC-271 is most commonly used in hot-melt low-pressure molding adhesive formulation application...voir plus Tohmide TXC-271 is a polyamide resin in a brown-colored pellet form. This product has a viscosity of 500-1200 mPa.s and a softening point of 141-153°C. Tohmide TXC-271 is most commonly used in hot-melt low-pressure molding adhesive formulation applications. voir moins | |
| Tohmide TXA-254B | Sanho Chemical Co., Ltd. | Tohmide TXA-254B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 3500-5500 mPa.s and a softening point of 150-160°C. Tohmide TXA-254B is most commonly used in hot-melt adhesive formulation applica...voir plus Tohmide TXA-254B is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 3500-5500 mPa.s and a softening point of 150-160°C. Tohmide TXA-254B is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Tohmide TXC-244C | Sanho Chemical Co., Ltd. | Tohmide TXC-244C is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 2000-5000 mPa.s and a softening point of 155-165°C. Tohmide TXC-244C is most commonly used in hot-melt adhesive formulation applica...voir plus Tohmide TXC-244C is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 2000-5000 mPa.s and a softening point of 155-165°C. Tohmide TXC-244C is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Kingmide 315-L | Sanho Chemical Co., Ltd. | Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and pu...voir plus Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and putty formulation applications. voir moins | |
| Tohmide 558-N | Sanho Chemical Co., Ltd. | Tohmide 558-N is a solid-type fatty polyamide resin in a brown-colored pellet form. This product has a viscosity of 300-800 mPa.s and a softening point of 155-165°C. Tohmide 558-N is most commonly used in structural hot-melt adhesive formulation applicati...voir plus Tohmide 558-N is a solid-type fatty polyamide resin in a brown-colored pellet form. This product has a viscosity of 300-800 mPa.s and a softening point of 155-165°C. Tohmide 558-N is most commonly used in structural hot-melt adhesive formulation applications. voir moins | |
| Tohmide 235-A | Sanho Chemical Co., Ltd. | Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formul...voir plus Tohmide 235-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-18,000 mPa.s and a specific gravity of 0.97. TOHMIDE 235-A is most commonly used in structural adhesive and grout formulation applications. voir moins | |
| SURFADOL 532 | DKSH | SURFADOL 532 is a molecular defoamer specifically designed for water-based systems. Its features include excellent substrate wetting, synergy with conventional defoamers, effective long-lasting foam control against microfoam, and silicone-free, non-toxic ...voir plus SURFADOL 532 is a molecular defoamer specifically designed for water-based systems. Its features include excellent substrate wetting, synergy with conventional defoamers, effective long-lasting foam control against microfoam, and silicone-free, non-toxic formulation. It also does not contain added alkylphenol ethoxylates (APEs). voir moins | Request Sample |
| Kingmide 310 | Sanho Chemical Co., Ltd. | Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive a...voir plus Kingmide 310 is a high molecular weight, high viscosity, reactive polyamide resin in a brown-colored, viscous liquid form. This product has a viscosity of 30,000-50,000 mPa.s and a specific gravity of 0.97. Kingmide 310 is most commonly used in adhesive and coating formulation applications. voir moins | |
| Kingmide 74-KB | Sanho Chemical Co., Ltd. | Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive for...voir plus Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive formulation applications. voir moins | |
| Kingmide 74-NP | Sanho Chemical Co., Ltd. | Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive form...voir plus Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive formulation applications. voir moins | |
| Kingmide X-2100 | Sanho Chemical Co., Ltd. | Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, ...voir plus Kingmide X-2100 is a medium viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 6000-12,000 mPa.s and a specific gravity of 1.04. Kingmide X-2100 is most commonly used in adhesive, coating, and putty formulation applications. voir moins | |
| Tohmide 225-R | Sanho Chemical Co., Ltd. | Tohmide 225-R is a medium viscosity, reactive polyaminoamide in a brown-colored viscous liquid form. This product has a viscosity of 3500-10,000 mPa.s and a specific gravity of 0.97. Tohmide 225-R is most commonly used in adhesive, sealant, putty, and sur...voir plus Tohmide 225-R is a medium viscosity, reactive polyaminoamide in a brown-colored viscous liquid form. This product has a viscosity of 3500-10,000 mPa.s and a specific gravity of 0.97. Tohmide 225-R is most commonly used in adhesive, sealant, putty, and surface coating formulation applications. voir moins | |
| Tohmide 225-X | Sanho Chemical Co., Ltd. | Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coati...voir plus Tohmide 225-X is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-X is most commonly used in adhesive, sealant, and surface coating formulation applications. voir moins | |
| Tohmide 245-LP | Sanho Chemical Co., Ltd. | Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective c...voir plus Tohmide 245-LP is a low viscosity, polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 0.90. Tohmide 245-LP is most commonly used in structural adhesive and protective coating formulation applications. voir moins | |
| Tohmide 280-B | Sanho Chemical Co., Ltd. | Tohmide 280-B is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Tohmide 280-B is most commonly used in sealant and adhesive ...voir plus Tohmide 280-B is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Tohmide 280-B is most commonly used in sealant and adhesive formulation applications. voir moins | |
| Kingcure 515-KD | Sanho Chemical Co., Ltd. | Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...voir plus Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. voir moins | |
| Fujicure 5300 | Sanho Chemical Co., Ltd. | Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...voir plus Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. voir moins | |
| Fujicure FX-220 | Sanho Chemical Co., Ltd. | Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...voir plus Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. voir moins | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...voir plus Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. voir moins | |
| Tohmide 235-S | Sanho Chemical Co., Ltd. | Tohmide 235-S is a medium viscosity, polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 4500-9000 mPa.s and a specific gravity of 0.97. Tohmide 235-S is most commonly used in structural adhesive ...voir plus Tohmide 235-S is a medium viscosity, polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 4500-9000 mPa.s and a specific gravity of 0.97. Tohmide 235-S is most commonly used in structural adhesive and grout formulation applications. voir moins | |
| Kingcure X-165A | Sanho Chemical Co., Ltd. | Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulat...voir plus Kingcure X-165A is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 50-150 mPa.s and a specific gravity of 1.11. Kingcure X-165A is most commonly used in solvent-free coating formulation applications. voir moins | |
| Kingmide 315-S | Sanho Chemical Co., Ltd. | Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-co...voir plus Kingmide 315-S is a high viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315-S is most commonly used in adhesive and high-solids anti-corrosive coating formulation applications. voir moins | |
| Polydo GY-420 | Kukdo Chemical Co., Ltd. | Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing ...voir plus Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing materials. Foam density can be varied with formulation. voir moins | |
| DERCOLYTE LTG | DRT | Issue de la polymérisation des terpènes, la DERCOLYTE LTG est une résine tackifiante de bas point de ramollissement, à faible taux de COV, recommandée pour plastifier et améliorer l’adhésion de certaines formules d’adhésifs sensibles à la pression. | |
| Osakryl® OSA A | Synthos S.A. | Osakryl® OSA A is a water dispersion of styrene-acrylic copolymer produced in the presence of emulsifying system composed of ionic and non-ionic surface active agents.This product is APEO and solvent free. Osakryl® OSA A is designed for the formulation of...voir plus Osakryl® OSA A is a water dispersion of styrene-acrylic copolymer produced in the presence of emulsifying system composed of ionic and non-ionic surface active agents.This product is APEO and solvent free. Osakryl® OSA A is designed for the formulation of sealants, putties, and flexible fillers. voir moins | |
| Neboplast® VA 9030 | NECARBO B.V. | Neboplast® VA 9030 is a vinylacetate homopolymer dispersion. This white liquid is a PVAc dispersion binder that has medium viscosity and is plasticizer free. Neboplast® VA 9030 produces brittle films and can be used for the formulation of adhesives used i...voir plus Neboplast® VA 9030 is a vinylacetate homopolymer dispersion. This white liquid is a PVAc dispersion binder that has medium viscosity and is plasticizer free. Neboplast® VA 9030 produces brittle films and can be used for the formulation of adhesives used in the paper and cardboard industry. voir moins | |
| SUPRASEC® 2944 | Huntsman Polyurethanes EMEAI | SUPRASEC 2944 - multi-purpose MDI raw material / isocyanate from Huntsman Polyurethanes for use in the formulation of one component (1k) fast cure structural wood adhesives offering a strong bond, extremely high ageing properties, a medium open time - all...voir plus SUPRASEC 2944 - multi-purpose MDI raw material / isocyanate from Huntsman Polyurethanes for use in the formulation of one component (1k) fast cure structural wood adhesives offering a strong bond, extremely high ageing properties, a medium open time - all in line with D4, EN204 and WATT 91 standards. voir moins | |
| Silane Coupling Agent KH-350 | Zhejiang Feidian Chemical Co., Ltd. | KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellenc...voir plus KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices. voir moins | |
| Kingcure 925 | Sanho Chemical Co., Ltd. | Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...voir plus Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. voir moins | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...voir plus Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. voir moins | |
| Fujicure 5000 | Sanho Chemical Co., Ltd. | Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...voir plus Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. voir moins | |
| Fujicure FXD-822 | Sanho Chemical Co., Ltd. | Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and m...voir plus Fujicure FXD-822 is a modified cycloaliphatic amine epoxy curing agent in a light honey-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.03. Fujicure FXD-822 is most commonly used in solvent-free coating and mortar formulation applications. voir moins | |
| Araldite® GY 6010 CSR | Jubail Chemical Industries Co. | Araldite® GY 6010 CSR is a general purpose, unmodified, low to medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 CSR is used in the f...voir plus Araldite® GY 6010 CSR is a general purpose, unmodified, low to medium viscosity epoxy resin based on Bisphenol A. This product is characterized by its reactivity, compatibility, and low hydrolysable chlorine content. Araldite® GY 6010 CSR is used in the formulation of chemical resistant coatings and matrix adhesives. voir moins | |
| Tohmide 255 | Sanho Chemical Co., Ltd. | Tohmide 255 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 300-600 mPa.s and a specific gravity of 0.97. Tohmide 255 is most commonly used in reactive epoxy lining and ...voir plus Tohmide 255 is a low viscosity, fast setting, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 300-600 mPa.s and a specific gravity of 0.97. Tohmide 255 is most commonly used in reactive epoxy lining and thin bonding mortar formulation applications. voir moins | |
| Kingcure 800-S | Sanho Chemical Co., Ltd. | Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fa...voir plus Kingcure 800-S is a mercaptan terminated polymer in a light yellow-colored viscous liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure 800-S is most commonly used in mortar and fast-setting adhesive formulation applications. voir moins | |
| VINNAPAS® 400 H | Wacker Chemie AG | VINNAPAS® 400 H is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0 °C. It was developed as a higher viscosity, high-performance dispersion offering a superior balance of adhesive/c...voir plus VINNAPAS® 400 H is a poly(vinyl alcohol) stabilized vinyl acetate-ethylene copolymer dispersion with a glass transition temperature (Tg) of 0 °C. It was developed as a higher viscosity, high-performance dispersion offering a superior balance of adhesive/cohesive properties useful in achieving much higher formulation viscosities. voir moins | |
| SUPRASEC® 2244 | Huntsman Polyurethanes EMEAI | SUPRASEC 2244 - multi-purpose MDI raw material / isocyanate from Huntsman Polyurethanes for use in the formulation of one component (1k) fast cure structural wood adhesives offering a strong bond, extremely high ageing properties and a medium open time - ...voir plus SUPRASEC 2244 - multi-purpose MDI raw material / isocyanate from Huntsman Polyurethanes for use in the formulation of one component (1k) fast cure structural wood adhesives offering a strong bond, extremely high ageing properties and a medium open time - all in line with D4, EN204 and WATT 91 standards. voir moins | |
| Kingcure N-784 | Sanho Chemical Co., Ltd. | Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...voir plus Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. voir moins | |
| DESMOPHEN® VP LS 2388 | Covestro | A flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor weathering, high film elastic...voir plus A flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor weathering, high film elasticity and good tar resistance; also in the flexibilisation of hard coatings, e.g. in industrial applications. voir moins | |
| Epotec® YD 522 | Aditya Birla | Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applicati...voir plus Epotec® YD 522 is a low viscosity bisphenol-A liquid epoxy resin, modified with a reactive diluent. The lower viscosity of this product allows for increased filler loading of a formulation. This product is ideal for use in self-leveling flooring applications, high solids & solvent-free coatings, and adhesives. voir moins | |
| Desmodur® E 15 | Covestro | Desmodur® E 15 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate. It is ideal for use in the formulation of flexible coatings and sealing compounds. Desmodur® E 15 can be combined with Hardener® DT to formulate highly reactive two-com...voir plus Desmodur® E 15 is an aromatic polyisocyanate prepolymer based on toluene diisocyanate. It is ideal for use in the formulation of flexible coatings and sealing compounds. Desmodur® E 15 can be combined with Hardener® DT to formulate highly reactive two-component systems which yield highly flexible highbuild coatings that can be used for crackbridging coatings on concrete surfaces. Combination with latent hardener (bisoxazolidine) produces highly flexible one-component systems for coating flat roofs. voir moins | |
| VESTANAT® EP-M 222 X | Evonik Operations GmbH, BL Crosslinkers | VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % ...voir plus VESTANAT® EP-M 222 X is a methoxysilane functional urethane crosslinker that can be used as a crosslinker to increase the flexibility of highly scratch resistant coatings, e.g. highly scratch resistant NISO*2 coatings. It is dissolved at 85 % in xylene, allowing it to be used in low-VOC coatings formulation. voir moins | Request Sample |
| Razeen® LR 1120 | Jubail Chemical Industries Co. | Razeen® LR 1120 is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1120 is used in the formulation of high solid...voir plus Razeen® LR 1120 is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1120 is used in the formulation of high solids chemical resistant coatings, matrix adhesives, and UV cur epoxy acrylates. voir moins | |
| Organosilane S1 | Dalian Onichem Co., Ltd. | Organosilane S1 is a thiocarboxylate functional silane. It is designed to reduce the number of non-productive mixing steps, while improving processing and performance of the tread compound. It requires only a single non-productive mixing step. With this s...voir plus Organosilane S1 is a thiocarboxylate functional silane. It is designed to reduce the number of non-productive mixing steps, while improving processing and performance of the tread compound. It requires only a single non-productive mixing step. With this silane, mixing temperature as high as 180°C can be employed, dependent on the formulation. voir moins | Request Sample |
| TIB KAT® K15 | TIB Chemicals | TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It...voir plus TIB KAT® K15 is a special formulation based on potassium octoate used for the manufacturing of polyisocyanurates, crosslinking of maleic anhydride-containing polymers with polyols and used as a cocatalyst for the curing of unsaturated polyester resins. It shows high compatibility and miscibility with low polar reaction partners due to its special composition. voir moins | Request Sample |
| Tohmide 225-XX | Sanho Chemical Co., Ltd. | Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, s...voir plus Tohmide 225-XX is a polyaminoamide-type epoxy curing agent with a longer pot life in a brown-colored viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Tohmide 225-XX is most commonly used in adhesive, sealant, and surface coating formulation applications. voir moins | |
| Razeen® LR 1140-B | Jubail Chemical Industries Co. | Razeen® LR 1140-B is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1140-B is used in the formulation of high s...voir plus Razeen® LR 1140-B is an unmodified epoxy resin based on Bisphenol A. This product is characterized by its very low viscosity, high purity, reactivity, compatibility, and hydrolysable chlorine content. Razeen® LR 1140-B is used in the formulation of high solids chemical resistant coatings, matrix adhesives, and UV cur epoxy acrylates. voir moins | |
| Incozol LV | Incorez Ltd. | Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, aut...voir plus Incozol LV is a reactive diluent designed to help producers of polyurethane coatings and sealants attain low VOC systems. It is used in the formulation of two component coatings where Incozol LV replaces a portion of the polyol component, for example, automotive refinish and OEM coatings. Other uses include high solids PU coatings for boats, industrial maintenance, aircraft, automotive sealants, anti-graffiti lacquers and waterproof coatings. voir moins | |
| Araldite® GY 257 | Jubail Chemical Industries Co. | Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and ...voir plus Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and acid. Araldite® GY 257 is used in the formulation of solvent-free coatings and structure adhesives. voir moins | |
| TIB KAT® SP | TIB Chemicals | TIB KAT® SP is a formulation based on methane sulfonic acid and a phosphorous compound. It is an excellent catalyst providing high efficiency in esterification reactions. In general terms, the use of this product leads to products with significantly light...voir plus TIB KAT® SP is a formulation based on methane sulfonic acid and a phosphorous compound. It is an excellent catalyst providing high efficiency in esterification reactions. In general terms, the use of this product leads to products with significantly lighter colour values than using pure methane sulfonic acid, other sulfonic acids or sulfuric acid. voir moins | Request Sample |
| Razeen® LR 2257 | Jubail Chemical Industries Co. | Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical performance, surface penetration, and its resistance to chemicals, acid, a...voir plus Razeen® LR 2257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical performance, surface penetration, and its resistance to chemicals, acid, and solvents. Razeen® LR 2257 is used in the formulation of solvent-free coatings and structural adhesives. voir moins | |
| EPOSIR® 7136 80 XL | SIR Industriale SpA | EPOSIR® 7136 80 XL is a semisolid low molecular weight epoxy resin solution in xylene. It has a higher molecular weight and viscosity than EPOSIR® 7134 80 XL. It provides good flexibility, improved adhesion and impact strengths. This product is well suite...voir plus EPOSIR® 7136 80 XL is a semisolid low molecular weight epoxy resin solution in xylene. It has a higher molecular weight and viscosity than EPOSIR® 7134 80 XL. It provides good flexibility, improved adhesion and impact strengths. This product is well suited for formulation of adhesives, fiber reinforced composite materials, and coatings. voir moins | |
| Osakryl® AH 035 | Synthos S.A. | Osakryl® AH 035 is an APEO-free, solvent-free, water dispersion of acrylic copolymer. This product has a total solids content of 56-60% and an average particle size of 200-300 nm. Osakryl® AH 035 is most commonly used in acrylic sealant, liquid foil, and ...voir plus Osakryl® AH 035 is an APEO-free, solvent-free, water dispersion of acrylic copolymer. This product has a total solids content of 56-60% and an average particle size of 200-300 nm. Osakryl® AH 035 is most commonly used in acrylic sealant, liquid foil, and elastic adhesive and coating formulation applications. voir moins | |
| 2-Methyl-1,3-Propanediol | DCC (Dairen Chemical Corp.) | 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propan...voir plus 2-Methyl-1,3-Propanediol is a by-product, which is produced by hydro-formulation and hydro-generation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a colorless, low viscosity and toxic liquid with a unique molecular structure. 2-Methyl-1,3-Propanediol is used as a raw material in monomers for the preparation of coatings and binders. voir moins | |
| 1,4-Butanediol (1,4-BDO) | DCC (Dairen Chemical Corp.) | 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manuf...voir plus 1,4-Butanediol (1,4-BDO) is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide and hydrogen. 1,4-Butanediol is a colorless, high-boiling liquid with a low order of toxicity. 1,4-Butanediol is used as a raw material for manufacturing carrier solvent in printing ink, and is a key component of hot melt adhesive. voir moins | |
| n-Propanol | DCC (Dairen Chemical Corp.) | n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether...voir plus n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether. n-Propanol is used in solvents, as an intermediate chemical for synthesis, industrial coatings, adhesives, and printing inks. voir moins | |
| Itamid B70X | DKSH | Itamid B70X is a polyaminoamide resin in a solution of xylene widely used in epoxy formulates. | Request Sample |
| Osakryl® OSA H | Synthos S.A. | Osakryl® OSA H is a water dispersion of styrene-acrylic copolymer produced in the presence of emulsifying system composed of ionic and non-ionic surface active agents.This product is APEO and solvent free. Osakryl® OSA H is designed for the formulation of...voir plus Osakryl® OSA H is a water dispersion of styrene-acrylic copolymer produced in the presence of emulsifying system composed of ionic and non-ionic surface active agents.This product is APEO and solvent free. Osakryl® OSA H is designed for the formulation of two components hydroisolations, mortars modification, different types of elastic adhesives, and elastic coatings. voir moins | |
| RHEOLATE® 208 | Elementis | RHEOLATE® 208 rheological additive is a 100% solids, polyether polyurethane associative (NISAT) thickener in powder form, designed for use in waterborne and aqueous systems needing a reduced VOC or solvent-free formulation and where a powdered product is ...voir plus RHEOLATE® 208 rheological additive is a 100% solids, polyether polyurethane associative (NISAT) thickener in powder form, designed for use in waterborne and aqueous systems needing a reduced VOC or solvent-free formulation and where a powdered product is more convenient. This rheology modifier provides benefits additional to those of its liquid counterpart RHEOLATE® 278 TF. voir moins | |
| Polymer ST 48 | Evonik Operations GmbH, BL Silanes | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins | |
| Polymer ST 48 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the applic...voir plus Polymer ST 48 offers a good handling viscosity and is therefore easy to apply manually. Formulation surfaces are quickly tack-free after application, which ensures rapid processing and avoids long waiting times. It is especially recommended for the application as sealant for interior or exterior joints, e.g. expansion or connection joints, interior joints for dry walling, joints at staircases. voir moins |
