| DESMODUR® E 1660 | Covestro | An aromatic polyisocyanate prepolymer based on toluene diisocyanate ideal for the use in the formulation of fast-drying, moisturecuring one-component polyurethane coatings and as the hardener for two-component polyurethane coatings. | |
| Tergum 120 | Ichemco | Tergum 120 is a stabilized pentaerythritol esterified rosin in a flake form. This product is most commonly used as a tackifier in water-based, solvent, and hot-melt adhesive formulation applications. | |
| DESMOPHEN® 775 XP | Covestro | An aromatic free, branched hydroxyl-bearing polyester used as a coreactant, usually with Desmodur N 75, N 3200 or N 100 in the formulation of very lightfast and weather-stable two pack coating. | |
| SUPRASEC® 2234 | Huntsman Polyurethanes EMEAI | SUPRASEC 2234 - multi-purpose MDI raw material / isocyanate from Huntsman Polyurethanes for use in the formulation of slow cure, one component (1k) adhesive, rubber crumb binder and parquet glue applications. | |
| SUPRASEC® 2018 | Huntsman Polyurethanes EMEAI | SUPRASEC 2018 - MDI raw material / isocyanate from Huntsman Polyurethanes with excellent low-temperature stability and high mechanical properties for the formulation of high quality, two component (2k), cast elastomer applications. | |
| EVACOTE® 7292C | The International Group, Inc. (IGI Wax) | EVACOTE® 7292C is a premium multi-component formulation having good barrier properties against both water and moisture vapor. Its low viscosity might assist in achieving better machinability for application. | |
| DESMODUR® E 2190 X | Covestro | An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a raw material in the formulation of solvent-borne one-component polyurethane coatings which cure by reaction with atmospheric moisture. | |
| DESMODUR® VL | Covestro | An aromatic polyisocyanate based on diphenylmethane diisocyanate. Ideal for use in combination with suitable Desmophen grades in the formulation of solvent-free two-component polyurethane coatings, fillers, sealing compounds and synthetic resin mortars. | |
| SUPRASEC® 2385 | Huntsman Polyurethanes EMEAI | SUPRASEC 2385 - uretonimine-modified pure variant MDI raw material / isocyanate from Huntsman Polyurethanes with enhanced wetting properties for prepolymers and the formulation of two component (2k) adhesive systems with better miscibility / compatability...voir plus SUPRASEC 2385 - uretonimine-modified pure variant MDI raw material / isocyanate from Huntsman Polyurethanes with enhanced wetting properties for prepolymers and the formulation of two component (2k) adhesive systems with better miscibility / compatability. voir moins | |
| DESMODUR® E XP 2723 | Covestro | An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a binder for the formulation of moisture-curing, one-component coatings and adhesives as well as a hardener for hydroxyl-bearingco-reactants. | |
| Kingmide 533 | Sanho Chemical Co., Ltd. | Kingmide 533 is a fatty polyamide resin in a brown pellet form. This product has a softening point of 100-110°C. Kingmide 533 is most commonly used in flexographic printing ink formulation applications. | |
| DESMOPHEN® PL 800 | Covestro | A fatty acid-modified polyester resin of low molecular weight used as a co-reactant for polyisocyanates (Desmodur HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. | |
| TIB KAT® 635 | TIB Chemicals | TIB KAT® 635 is a solid zinc based catalyst which is used for numerous applications. It is suitable as a raw material for wood treatment formulation and as a condensation catalyst for polyester resins. | Request Sample |
| R-114 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-114 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...voir plus R-114 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This resin is used in the formulation of enamel finishes and aerosol, rapid dry finishes. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). voir moins | |
| Kingmide 315-FS | Sanho Chemical Co., Ltd. | Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications. | |
| Kingmide 507-KS | Sanho Chemical Co., Ltd. | Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications. | |
| DESMODUR® E 23 | Covestro | An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a binder for the formulation of moisture-curing, one-component coatings and adhesives, as well as a hardener for hydroxyl-bearing co-reactants. | |
| SUPRASEC® 2060 | Huntsman Polyurethanes EMEAI | SUPRASEC 2060 - MDI raw material / isocyanate from Huntsman Polyurethanes with increased reactivity for use in the formulation of one component (1k), fast, moisture cure adhesives that need to offer a strong long lasting bond. | |
| Tacksol ER 19 | Ichemco | Tacksol ER 19 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 18-20%. Tacksol ER 19 is most commonly used in adhesive and primer formulation applications. | |
| SUPRASEC® 1042 | Huntsman Polyurethanes EMEAI | SUPRASEC 1042 - emulsifiable polymeric MDI raw material / isocyanate from Huntsman Polyurethanes for use as a crosslinker in the formulation of two component (2k) latex systems, as a hardener for EPI glue, and in waterborne primers. | |
| Kingmide 326-A | Sanho Chemical Co., Ltd. | Kingmide 326-A is a polyaminoamide curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-16,000 mPa.s. Kingmide 326-A is most commonly used in adhesive formulation applications. | |
| Kingcure 800-C | Sanho Chemical Co., Ltd. | Kingcure 800-C is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingcure 800-C is most commonly used in construction adhesive formulation applications. | |
| SUPRASEC® 2445 | Huntsman Polyurethanes EMEAI | SUPRASEC 2445 - polyether-modified MDI / isocyanate from Huntsman Polyurethanes with improved liquidity and yields plus good cold storage stability and good processability for the formulation of soft, high performance, two component (2k) cast elastomers. | |
| DESMODUR® 44 M FLAKES | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 M LIQUID | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 MC FLAKES | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 MC FUSED | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| DESMODUR® 44 MC LIQUID | Covestro | A monomeric diphenylmethane-4,4'-diisocyanate (MDI) that is solid at room temperature and liquid above around 40 °C. It is suitable for combination with Baycoll, Desmophen and Acclaim in the formulation of adhesives and polyurethane coating resins. | |
| Kingmide 315-FC | Sanho Chemical Co., Ltd. | Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications. | |
| Kingmide 513-F | Sanho Chemical Co., Ltd. | Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications. | |
| SUPRASEC® 2496 | Huntsman Polyurethanes EMEAI | SUPRASEC 2496 - MDI raw material / isocyanate from Huntsman Polyurethanes providing enhanced adhesion, low temperature stability and excellent flow properties for use in the formulation of stiff to hard two component (2k) adhesive and coating systems. | |
| Tergum 42 | Ichemco | Tergum 42 is a liquid rosin triethylglycol ester. This product has a viscosity of 39,000-62,000 Cp. Tergum 42 is most commonly used as a tackifier in water-based, solvent, and hot-melt adhesive formulation applications. | |
| DESMODUR® VP LS 2257 | Covestro | A blocked aliphatic polyisocyanate based on HDI used in combination with OH-functional polyols, preferably Desmophen T-grade OH-functional polyesters, in the formulation of lightfast, one-component polyurethane baking coatings, especially in coil and can ...voir plus A blocked aliphatic polyisocyanate based on HDI used in combination with OH-functional polyols, preferably Desmophen T-grade OH-functional polyesters, in the formulation of lightfast, one-component polyurethane baking coatings, especially in coil and can coating applications. voir moins | |
| Kingmide 384-S | Sanho Chemical Co., Ltd. | Kingmide 384-S is a modified polyaminoamide epoxy adduct curing agent in a brown-colored viscous liquid form. This product has a viscosity of 7000-10,000 mPa.s. Kingmide 384-S is most commonly used in adhesive formulation applications. | |
| R-116 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-116 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...voir plus R-116 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has SBP6 as a solvent. This resin is also used in the formulation of enamel finishes and aerosol, rapid dry finishes. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). voir moins | |
| R-280 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-280 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...voir plus R-280 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has 260-290 dist as a solvent. This resin is also used in the formulation of ink, clear base coats. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). voir moins | |
| R-281 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-281 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...voir plus R-281 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has 260-290 dist as a solvent. This resin is also used in the formulation of clear ink varnishes. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). voir moins | |
| TIB KAT® 623 | TIB Chemicals | TIB KAT® 623 is a catalyst that is used in the deblocking of uretdiones for urethane coatings, in the condensation of silicone resins, in the crosslinking or powder resins and as a raw material for the formulation of PVC stabilizers. | Request Sample |
| Kingcure D-211 | Sanho Chemical Co., Ltd. | Kingcure D-211 is a modified aliphatic polyamine epoxy curing agent in an amber-colored liquid form. This product has a viscosity of 50-150 mPa.s. Kingcure D-211 is most commonly used in coating and adhesive formulation applications. | |
| Bayhydrol® HD 2017 | Covestro | Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. | |
| Kingmide 710-SS | Sanho Chemical Co., Ltd. | Kingmide 710-SS is a modified aliphatic amidoamine curing agent. This product has a viscosity of 150-500 mPa.s and a specific gravity of 0.99. Kingmide 710-SS is most commonly used in mortar and adhesive formulation applications. | |
| EPOSIR® 7134 80 XL | SIR Industriale SpA | EPOSIR® 7134 80 XL is a semisolid low molecular weight epoxy resin solution in xylene. It provides improved adhesion and impact strengths. This product is well suited for formulation of adhesives, fiber reinforced composite materials, and coatings. | |
| Kingmide 550-A | Sanho Chemical Co., Ltd. | Kingmide 550-A is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-A is most commonly used in hot-melt adhesive formulation applications. | |
| Desmodur® E 21 | Covestro | Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants...voir plus Desmodur® E 21 is an aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate (MDI). Ideal for use as a binder for the formulation of moisture-curing, one-component coatings and adhesives and as a hardener for hydroxyl-bearing co-reactants. voir moins | |
| DESMODUR® E 22 | Covestro | An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. Ideal for the use in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible aggregates, e.g. ...voir plus An aromatic polyisocyanate prepolymer based on diphenylmethane diisocyanate. Ideal for the use in the formulation of highly flexible one- and two-component polyurethane coatings and adhesives. It can also be used as a binder for flexible aggregates, e.g. rubber granules. voir moins | |
| Bisomer® CL HEMA | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® CL HEMA (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Bisomer® HEMA HP | GEO Specialty Chemicals, Inc.TRIMET Products Group | Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogel...voir plus Bisomer® HEMA HP (Hydroxyethyl Methacrylate) is widely used in the preparation of long-term wear or disposable contact lenses, intra-ocular lenses and diverse biomedical applications. It is an ideal starting point in the formulation of biomedical hydrogels. voir moins | |
| Kingmide 701 | Sanho Chemical Co., Ltd. | Kingmide 701 is a modified aliphatic amidoamine curing agent in an amber liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.98. Kingmide 701 is most commonly used in adhesive formulation applications. | |
| Kingmide 715-A | Sanho Chemical Co., Ltd. | Kingmide 715-A is a medium viscosity, modified polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 1000-3000 mPa.s. Kingmide 715-A is most commonly used in putty and adhesive formulation applications. | |
| Tohmide 252 | Sanho Chemical Co., Ltd. | Tohmide 252 is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 100-400 mPa.s and a specific gravity of 0.96. Tohmide 252 is most commonly used in adhesive formulation applications. | |
| Kingmide 550-G | Sanho Chemical Co., Ltd. | Kingmide 550-G is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C. Kingmide 550-G is most commonly used in hot-melt adhesive formulation applications. | |
| Kingcure T-642NA | Sanho Chemical Co., Ltd. | Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications. | |
| R-115 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-115 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...voir plus R-115 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has a white spirit solvent. This resin is also used in the formulation of enamel finishes and aerosol, rapid dry finishes. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). voir moins | |
| Domide GX-483 | Kukdo Chemical Co., Ltd. | Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formula...voir plus Domide GX-483 is a Polyamidoamine/Epoxy adduct designed for reaction with solid or liquid Epoxy Resins. GX-483 can be easily formulated to comply with VOC regulation. This product gives excellent compatibility with solid and liquid Epoxy Resin for formulation of high solid coatings. In addition, it is well suited for use in the production of primers and maintenance coatings for industrial and marine purposes. voir moins | |
| EPOSIR® LBC 8199 40 BC SA | SIR Industriale SpA | EPOSIR® LBC 8199 40 BC SA is a special BPA based resin solution in xylene. It has good adhesion and flexibility. This product is well suited for formulation of anti-corrosive paints for coatings for cans and coil applications. | |
| Hauschild SpeedMixer® DAC 150.3 / DAC 250.3 | Hauschild GmbH & Co. KG | The DAC 150.3 and DAC 250.3 are the last generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)] |  |
| Hauschild SpeedMixer® DAC 150.1 / DAC 250.1 | Hauschild GmbH & Co. KG | The DAC 150.1 and DAC 250.1 are the first generation smallest machines in the Hauschild SpeedMixer® product lineup. The main application is formulation development as well as QA/QC testing [Maximum nominal gross weight up to 250g (.55lb)] |  |
| SUPRASEC® 2651 | Huntsman Polyurethanes EMEAI | SUPRASEC 2651 - a low viscosity MDI raw material / isocyanate from Huntsman Polyurethanes with medium functionality as well as good penetration and wetting properties for use in the formulation of slow cure two component (2k) adhesive and parquet glue sys...voir plus SUPRASEC 2651 - a low viscosity MDI raw material / isocyanate from Huntsman Polyurethanes with medium functionality as well as good penetration and wetting properties for use in the formulation of slow cure two component (2k) adhesive and parquet glue systems. voir moins | |
| R-242 Vinyl Toluene Modified Alkyd | Deltech Corporation | R-242 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durabil...voir plus R-242 Vinyl Toluene Modified Alkyd (VT Alkyds) is used to formulate fast drying coatings systems with solubility in low cost aliphatic solvents. Coatings formulated with this resin yields films with good adhesion, chemical resistance, fast drying, durability, excellent solution color and color retention properties. This product has SBP6 as a solvent. This resin is also used in the formulation of spray applications included those used in stoving and industrial systems. VT modified resins are available in either white spirit or dearomatized white spirit (e.g. D40). voir moins | |
| SARBIO 5102 | Sartomer Americas | SARBIO 5102 is a monofunctional acrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers high Tg, excellent adhesion to your formulation and maintain the flexibility of a urethane acrylat...voir plus SARBIO 5102 is a monofunctional acrylate monomer, with a minimum BRC (BioRenewable Carbon Content) of 75%, in use for UV/EB curing compositions, that offers high Tg, excellent adhesion to your formulation and maintain the flexibility of a urethane acrylate. voir moins | |
| BR-5825I30 | Bomar, formerly Dymax Oligomers & Coatings | BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weath...voir plus BR-5825I30 was designed to be a lower viscosity equivalent to BR-582. BR-5825I30 offers an excellent combination of toughness and flexibility, with the added advantage of lower formulation viscosity. BR-5825I30 is low in color and provides excellent weatherability. voir moins | |
| N-Octyltrimethoxysilane | Dalian Onichem Co., Ltd. | N-Octyltrimethoxysilane is a colorless to pale yellow liquid which boils 75°C. It is high purity, undiluted Alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper...voir plus N-Octyltrimethoxysilane is a colorless to pale yellow liquid which boils 75°C. It is high purity, undiluted Alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. voir moins | Request Sample |
| DESMOPHEN® T 1665 SN/IB | Covestro | An oil-free, hydroxyl-bearing, saturated polyester used in combination with amino or crosslinking baking urethane resins in the formulation of baking coatings such as primers, automotive primer surfacers, coil coatings and general industrial coatings with...voir plus An oil-free, hydroxyl-bearing, saturated polyester used in combination with amino or crosslinking baking urethane resins in the formulation of baking coatings such as primers, automotive primer surfacers, coil coatings and general industrial coatings with very good weather stability. voir moins | |
| Tergum 100 | Ichemco | Tergum 100 is a stabilized pentaerythritol esterified rosin in a flake form. This product has a melting range of 92-98°C. Tergum 100 is most commonly used as a tackifier in water-based, solvent, and hot-melt adhesive formulation applications. | |
| Kingmide 334 | Sanho Chemical Co., Ltd. | Kingmide 334 is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s and a specific gravity of 0.96. Kingmide 334 is most commonly used in adhesive formulation applications. | |
| Fujicure 5260 | Sanho Chemical Co., Ltd. | Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications...voir plus Fujicure 5260 is a modified cycloaliphatic polyamine in a light brown-colored viscous liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.03. Fujicure 5260 is most commonly used in epoxy mortar formulation applications. voir moins | |
| Organosilane NOEO | Dalian Onichem Co., Ltd. | Organosilane NOEO is a colorless to pale yellow liquid which boils at 98°C. It is high purity, undiluted monomeric alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon...voir plus Organosilane NOEO is a colorless to pale yellow liquid which boils at 98°C. It is high purity, undiluted monomeric alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. voir moins | Request Sample |
| Kingcure 800-F | Sanho Chemical Co., Ltd. | Kingcure 800-F is a mercaptan terminated polymer in a light yellow-colored liquid form. This product has a slower gel time and a viscosity of 10,000-20,000 mPa.s. Kingcure 800-F is most commonly used in construction adhesive formulation applications. | |
| Kingcure B-312 | Sanho Chemical Co., Ltd. | Kingcure B-312 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 30 mPa.s. Kingcure B-312 is most commonly used in solvent-free coating and adhesive formulation applications. | |
| SUPRASEC® 2144 | Huntsman Polyurethanes EMEAI | SUPRASEC 2144 - multi-purpose MDI raw material / isocyanate from Huntsman Polyurethanes for use in the formulation of one component (1k) structural wood adhesives offering good ageing properties and a long open time in line with D4 EN204 and WATT 91 stand...voir plus SUPRASEC 2144 - multi-purpose MDI raw material / isocyanate from Huntsman Polyurethanes for use in the formulation of one component (1k) structural wood adhesives offering good ageing properties and a long open time in line with D4 EN204 and WATT 91 standards. voir moins | |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | Request Sample |
| SUPRASEC® 2015 | Huntsman Polyurethanes EMEAI | SUPRASEC 2015 - reactivity and viscosity modified MDI raw material / isocyanate from Huntsman Polyurethanes with high functionality including improved compatibility and enhanced adhesion for the formulation of modified MDI, MDI prepolymer, reactivity modi...voir plus SUPRASEC 2015 - reactivity and viscosity modified MDI raw material / isocyanate from Huntsman Polyurethanes with high functionality including improved compatibility and enhanced adhesion for the formulation of modified MDI, MDI prepolymer, reactivity modified high functionality mdi, and viscosity modified high functional MDI. voir moins | |
| EPOSIR® 7161 70 MK | SIR Industriale SpA | EPOSIR® 7161 70 MK is an epoxy resin solution in methyl ethyl ketone. It is designed for formulation of epoxy resins, pre pregs, and fiber reinforced epoxy laminates. This product is well suited for use in composite materials and electrical applications. | |
| Kingmide 328-A | Sanho Chemical Co., Ltd. | Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation application...voir plus Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation applications. voir moins | |
| Kingcure A-611 | Sanho Chemical Co., Ltd. | Kingcure A-611 is a modified aliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 13-25 mPa.s and a specific gravity of 1.09. Kingcure A-611 is most commonly used in adhesive formulation applications. | |
| Nyacol® AL25 | Nyacol Nano Technology | Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and pa...voir plus Nyacol® AL25 is a colloidal dispersion of boehmite with particle sizes of 70-80 nm at 20% Al2O3 content. This product is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Nyacol® AL25-HP | Nyacol Nano Technology | Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper co...voir plus Nyacol® AL25-HP is a colloidal dispersion of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. It is used in binders for high temperature refractories and ceramics, catalyst wash-coats, catalyst formulation, precision polishing, and paper coating. voir moins | |
| Razeen® LR 2254 | Jubail Chemical Industries Co. | Razeen® LR 2254 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic monoglycidyl ether. This product is characterized by its diluting properties. Razeen® LR 2254 is used in the formulation of solvent-free coatings and structural...voir plus Razeen® LR 2254 is a low viscosity epoxy resin based on Bisphenol A modified with an aliphatic monoglycidyl ether. This product is characterized by its diluting properties. Razeen® LR 2254 is used in the formulation of solvent-free coatings and structural adhesives. voir moins | |
| Kingmide 305 | Sanho Chemical Co., Ltd. | Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...voir plus Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. voir moins | |
| Kingmide 370 | Sanho Chemical Co., Ltd. | Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation appli...voir plus Kingmide 370 is a medium-viscosity, reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 2500-4500 mPa.s and a specific gravity of 0.95. Kingmide 370 is most commonly used in adhesive and putty formulation applications. voir moins | |
| Kingcure I-621 | Sanho Chemical Co., Ltd. | Kingcure I-621 is a modified cycloaliphatic diamine in a slightly yellow-colored viscous liquid form. This product has a viscosity of 1500-2500 mPa.s and a specific gravity of 1.02. Kingcure I-621 is most commonly used in coating formulation applications. | |
| Kingcure K-11 | Sanho Chemical Co., Ltd. | Kingcure K-11 is an accelerated aliphatic amine curing agent in an amber-colored liquid form. This product has a viscosity of 700-2400 mPa.s and a specific gravity of 1.04. Kingcure K-11 is most commonly used in adhesive formulation applications. | |
| Domide GX-328K | Kukdo Chemical Co., Ltd. | Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation ...voir plus Domide GX-328K is a Polyamide / Epoxy adduct dissolved in Xylene for reaction with solid Epoxy Resins. GX-328K is useful in maintenance coatings and primers. This product gives excellent compatibility with solvent free liquid Epoxy Resins for formulation of high solid coatings. voir moins | |
| Tohmide 390 | Sanho Chemical Co., Ltd. | Tohmide 390 is a solid-type polyamide resin in a brown pellet form. This product has a viscosity of 200-400 mPa.s and a softening point of 175-185°C. Tohmide 390 is most commonly used in hot-melt structural adhesive formulation applications. | |
| Tohmide 2400 | Sanho Chemical Co., Ltd. | Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation app...voir plus Tohmide 2400 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 2500-5000 mPa.s and a specific gravity of 0.97. Tohmide 2400 is most commonly used in medium heat adhesive formulation applications. voir moins | |
| Tohmide 2500 | Sanho Chemical Co., Ltd. | Tohmide 2500 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Tohmide 2500 is most commonly used in heat curing adhesive formulation appl...voir plus Tohmide 2500 is a low viscosity, reactive polyamide hardener in a brown-colored viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Tohmide 2500 is most commonly used in heat curing adhesive formulation applications. voir moins | |
| Kingcure I-631 | Sanho Chemical Co., Ltd. | Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applicati...voir plus Kingcure I-631 is a modified cycloaliphatic diamine in a light yellow-colored viscous liquid form. This product has a viscosity of 70-170 mPa.s and a specific gravity of 1.03. Kingcure I-631 is most commonly used in concrete adhesive formulation applications. voir moins | |
| MetaVue™ VS3200 Non-Contact Benchtop Spectrophotometer | X-Rite Europe GmbH | MetaVue™ VS3200 Non-Contact Benchtop Spectrophotometer is for QC and formulation Measurement. The MetaVue™ VS3200 non-contact imaging spectrophotometer brings breakthrough versatility and accuracy to the measurement of wet and dry paints, plastics, cosmet...voir plus MetaVue™ VS3200 Non-Contact Benchtop Spectrophotometer is for QC and formulation Measurement. The MetaVue™ VS3200 non-contact imaging spectrophotometer brings breakthrough versatility and accuracy to the measurement of wet and dry paints, plastics, cosmetics, and small and odd-shaped samples. voir moins |  |
| DESMOPHEN® 1800 | Covestro | A slightly branched polyester polyol used in combination with Desmodur L to formulate highly flexible coatings. In combination with Desmodur L to formulate highly flexible coatings. | |
| Tohmide 394 | Sanho Chemical Co., Ltd. | Tohmide 394 is a solid-type fatty polyamide resin in a brown pellet form. This product has a viscosity of 500-1000 mPa.s and a softening point of 105-115°C. Tohmide 394 is most commonly used in hot-melt structural adhesive formulation applications. | |
| Tohmide 560 | Sanho Chemical Co., Ltd. | Tohmide 560 is a low-melting viscosity polyamide resin in a brown-colored pellet form. This product has a viscosity of 200-400 mPa.s and a softening point of 155-165°C. Tohmide 560 is most commonly used in hot-melt adhesive formulation applications. | |
| Tohmide 1310 | Sanho Chemical Co., Ltd. | Tohmide 1310 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 1500-4500 mPa.s and a softening point of 115-125°C. Tohmide 1310 is most commonly used in hot-melt adhesive formulation applications. | |
| Tohmide 1360 | Sanho Chemical Co., Ltd. | Tohmide 1360 is a high molecular weight polyamide resin in a brown-colored pellet form. This product has a viscosity of 1500-4500 mPa.s and a softening point of 165-175°C. Tohmide 1360 is most commonly used in hot-melt adhesive formulation applications. | |
| Tohmide 245-HS | Sanho Chemical Co., Ltd. | Tohmide 245-HS is a very low viscosity, fatty polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 800-1100 cPs. Tohmide 245-HS is most commonly used in structural adhesive and protective coating formulation applications...voir plus Tohmide 245-HS is a very low viscosity, fatty polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 800-1100 cPs. Tohmide 245-HS is most commonly used in structural adhesive and protective coating formulation applications. voir moins | |
| Tohmide 245-S | Sanho Chemical Co., Ltd. | Tohmide 245-S is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1000-2500 mPa.s and a specific gravity of 0.96. Tohmide 245-S is most commonly used in bonding, sealing, and resin mortar formulation appl...voir plus Tohmide 245-S is a polyaminoamide epoxy curing agent in a brown-colored liquid form. This product has a viscosity of 1000-2500 mPa.s and a specific gravity of 0.96. Tohmide 245-S is most commonly used in bonding, sealing, and resin mortar formulation applications. voir moins | |
| Kingmide 551 | Sanho Chemical Co., Ltd. | Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applica...voir plus Kingmide 551 is a high molecular weight polyamide resin in a brown-yellow pellet form. This product has a softening point of 105-115°C and an application temperature of 150-180°C. Kingmide 551 is most commonly used in hot-melt adhesive formulation applications. voir moins | |
| Kingmide X-220B | Sanho Chemical Co., Ltd. | Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation ap...voir plus Kingmide X-220B is a low viscosity, modified reactive polyamide resin in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s. Kingmide X-220B is most commonly used in adhesive, coating, and patch repair mortar formulation applications. voir moins | |
| Kingcure 613-B | Sanho Chemical Co., Ltd. | Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applicati...voir plus Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applications. voir moins | |
| Kingcure B-311 | Sanho Chemical Co., Ltd. | Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applicat...voir plus Kingcure B-311 is a low viscosity, modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored liquid form. This product has a viscosity of 300-700 mPa.s. Kingcure B-311 is most commonly used in solvent-free coating formulation applications. voir moins | |
| Kingcure M-510BS | Sanho Chemical Co., Ltd. | Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation ap...voir plus Kingcure M-510BS is a modified activated aromatic amine curing agent in a dark brown-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.13. Kingcure M-510BS is most commonly used in primer coating formulation applications. voir moins |
