| Nubirox 302 in Styrene-Acrylic Primer (Formulation #EAA 18724) | Ferro Pigments | This styrene-acrylic primer features Nubirox 302. | |
| White Acrylic Topcoat for Airmix Spray (Formulation #07-1029B) | Ashland | Neocryl® XK-237 acrylic topcoat - airmix sprayable. | |
| N-Dodecyl vinyl ether, DDVE | BASF SE, Intermediates Division 巴斯夫中间体 | N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulation...voir plus N-Dodecyl vinyl ether, DDVE is a monomer for copolymers of n-Dodecyl vinyl ether are used as raw materials for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). It is a reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Dodecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. n-Dodecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. voir moins | |
| White Gloss using Incorez 142 & Incorez 148/024 | Incorez Ltd. | This formulation is a white gloss wall paint that utilizes the products Incorez 142 & Incorez 148/024. | |
| Araldite® GT 7097 | Jubail Chemical Industries Co. | Araldite® GT 7097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, and flexibility as well as its resistance to chemicals, solvents, water, and corrosion. Araldite® GT 7097 is used in the formulation...voir plus Araldite® GT 7097 is a solid, unmodified epoxy resin based on Bisphenol A. This product is characterized by its flow, wetting properties, gloss, adhesion properties, and flexibility as well as its resistance to chemicals, solvents, water, and corrosion. Araldite® GT 7097 is used in the formulation of metal decorating finishes, can and coil coatings, primers and enamels, metal furniture finishes, and primers. voir moins | |
| NUBIROX 301 in WB Acrylic Paint (Formulation #AA 13962) | Ferro Pigments | This WB acrylic paint features Nubirox 301. | |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosi...voir plus Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. voir moins | Request Sample |
| N-Octyltrimethoxysilane | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | N-Octyltrimethoxysilane is a colorless to pale yellow liquid which boils 75°C. It is high purity, undiluted Alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper...voir plus N-Octyltrimethoxysilane is a colorless to pale yellow liquid which boils 75°C. It is high purity, undiluted Alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. voir moins | Request Sample |
| Araldite® GZ 7071 X 75 | Jubail Chemical Industries Co. | Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation...voir plus Araldite® GZ 7071 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, and resistance to salt water. Araldite® GZ 7071 X 75 is used in the formulation for adhesive primers, anti-corrosive primers, zinc dust primers, top coats, and clear lacquers. voir moins | |
| Nubirox 213 in WB 2K Epoxy Primer (Formulation #EPPAA 19031) | Ferro Pigments | This WB 2K Epoxy Primer features Nubifer Y-5028, Nubifer NB-5970, and Nubirox 213. | |
| Nubirox 106 in WB 2K Epoxy-Polyamide Primer (Formulation #EPPAA 18954) | Ferro Pigments | This WB 2K Epoxy-Polyamide Primer features Nubirox 106. | |
| Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and...voir plus Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. voir moins | Request Sample |
| Razeen® SL 4171 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4171 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4171 X 75 is used in the formulation...voir plus Razeen® SL 4171 X 75 is a typical type 1 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4171 X 75 is used in the formulation of primers, anti-corrosive primers, zinc rich primers, top coats, clear lacquers, and quick dry floor coatings. voir moins | |
| Razeen® SL 4072 X 75 | Jubail Chemical Industries Co. | Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4072 X 75 is used in the formulation...voir plus Razeen® SL 4072 X 75 is a typical type 2 epoxy resin based on Bisphenol A as a solvent cut 75% in Xylene. This product is characterized by its adhesion properties, mechanical properties, chemical resistance, salt water resistance and corrosion resistance. Razeen® SL 4072 X 75 is used in the formulation of primers, anti-corrosive primers, zinc rich primers, top coats, clear lacquers, and quick dry floor coatings. voir moins | |
| Heat resistant Anti-Corrosion Paint up to 400°C (Formulation #R21402_0_1) | Hoffmann Mineral 霍夫曼矿物 | This heat resistant paint utilizes SILLITIN V 85. | |
| AMP-95® | ANGUS Chemical Company 安格斯化学公司 | AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion...voir plus AMP-95® is a multifunctional neutralizer containing 2-amino-2-methyl-1-propanol and 5% added water. Key attributes include neutralization, dispersancy, pH buffering, non-yellowing, stability, formulation optimization, alkaline pH development and corrosion control, offering inumerous benefits throughout the life cycle of a latex paint compared to regular pH neutralizers, such as ammonia, MEA, NaOH and also branded amines. In addition, AMP is the only US EPA VOC-exempt amine . This product is recommended for a wide range of applications, such as Architectural and Industrial Coatings, Emulsion Polymerization, Inks, Adhesives and Solvent-borne alkyds. voir moins | |
| Silane Coupling Agent KH-350 | Zhejiang Feidian Chemical Co., Ltd. 浙江沸点化工有限公司 | KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellenc...voir plus KH-350 is a high purity, undiluted N-octyltriethoxy-silane. When diluted with an appropriate solvent, it can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. KH-350 can also be used to improve the compatibility of mineral fillers or pigments in polyolefins or to ease their dispersion in nonpolar matrices. voir moins | |
| UCECOAT® 7210 | Allnex | UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasion and chemical resistances. UCECOAT® 7210 can be blended (with prior pH adjustment if required) with other waterborne...voir plus UCECOAT® 7210 is an energy curable flexible urethane acrylate supplied as emulsion in water, which can be mixed in all proportions with UCECOAT® 7200 and thereby allows to formulate protective UV coatings with adjustable flexibility as well as high abrasion and chemical resistances. UCECOAT® 7210 can be blended (with prior pH adjustment if required) with other waterborne UV resins to increase solid content and/or flexibility. voir moins | Request Sample |
| Bayhydur® XP 2655 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2655 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) used as the hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2655 is a crosslinking agent for waterborne systems from which reli...voir plus Bayhydur® XP 2655 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) used as the hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2655 is a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistances are required. Despite its relatively low hydrophilia, this hardener can be easily dispersed in the aqueous phase, even at low shear forces such as are typically found in trade applications. Coatings formulated with the product yield films with high gloss and very low haze. The increase in viscosity during mixing that is typical for hydrophilized hardeners, in particular with ionically hydrophilized polyol dispersions, can be controlled by prethinning with water or slight amounts of organic cosolvent. voir moins | |
| Desmodur® BL 3475 BA/SN | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® BL 3475 BA/SN is an aliphatic crosslinking stoving urethane resin is used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings; as an additive in conventional stoving coating systems to improv...voir plus Desmodur® BL 3475 BA/SN is an aliphatic crosslinking stoving urethane resin is used in combination with Desmophen® grades to formulate lightfast, one-component stoving polyurethane coatings; as an additive in conventional stoving coating systems to improve the reactivity, flexibility and adhesion. This product has a viscosity at 23°C of 1,000 ± 300 mPa·s, a color value (Iod) of ≤ 4, and a flash point of approximately 41°C. voir moins | |
| Acronal® ECO 502 AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® ECO 502 ap contains finely dispersed particules and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders and doesn’t require coalescing agent in formulation...voir plus Acronal® ECO 502 ap contains finely dispersed particules and has a low viscosity. It is odorless and contains no ammonia, solvents or plasticizers. It exhibits excellent compatibility with commonly used pigments and extenders and doesn’t require coalescing agent in formulation. Films obtained from it are clear, flexible and glossy, and very resistant to water and hydrolysis. Acronal® ECO 502 ap is ideal for zero-low VOC and odorless paints. Its high pigment binding capacity makes it suitable for use in emulsion paints, smoothing fillers and textured finishes. Due to its high alkali resistance and compatibility with common potassium water glasses, Acronal® ECO 502 ap can also be utilized in silicate-based finishes. voir moins | |
| Bayhydrol® UH 2952/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings...voir plus Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-7.5. When used in two-layer systems with TSA and two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 2952/1 are characterized by even, cloud-free films with a very good metallic effect, excellent gloss and good water resistance. Since it adheres to OEM finishes without prior sanding, the metallic basecoat can also be used for online retouching (45 min at 80°C). The metallic basecoat can be oversprayed with TSA or two-component polyurethane clearcoats after pre-drying e.g. for 5 minutes at an oven temperature of 80°C or for 15 minutes at room temperature. voir moins | |
| AKTISIL AM | Hoffmann Mineral 霍夫曼矿物 | AKTISIL AM is an activated SILLITIN Z 86, produced by modifying the surface with amino functional silane. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Chlorinated Rubber-YURON CR 10 | Yuron New Material 裕隆新材料 | Chlorinated Rubber-YURON CR 10 is a binder for anti-corrosion coatings and a combination binder for alkyd and acrylic resins. It has a viscosity of 8-13 mpa.s at 25°C. | |
| Nubifer NB-5970 | Ferro Pigments | Nubifer NB-5970 is a micronized Black Iron Oxide pigment manufactured with a special process that minimizes the presence of agglomerates, providing enhanced dispersibility, color reproducibility and gloss. | |
| K-FLEX® XM-332 | King Industries, Inc. | K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate sy...voir plus K-FLEX® XM-332 is a low viscosity polyester polyol modifier resin that provides enhanced flexibility in solvent-borne, high solids, and solventless systems. It is recommended for use in air dry/force dry 2-component polyurethanes and blocked isocyanate systems. It appears as a light colored liquid, is 100% active, and offers good flexibility and hydrolytic stability. This product is soluble in aromatics and polar organic solvents like ketones, alcohols, glycols, esters, and glycol ethers. Two things that it is not soluble in are aliphatics and water. K-FLEX® XM-332 can be applied in structural adhesives, thermoplastic urethanes, plastic coatings, cast elastomer prepolymers, and automotive topcoats and OEM coatings. voir moins | |
| HEUCORIN® RZ | Heubach/Heucotech, Ltd. | HEUCORIN® RZ is a zinc-5-nitroisophthalate, an effective organic inhibitor based on the zinc salt of an organic nitro compound, for use as an organic corrosion inhibitor for the application in Protective Coatings. This product has a moisture content of 5%...voir plus HEUCORIN® RZ is a zinc-5-nitroisophthalate, an effective organic inhibitor based on the zinc salt of an organic nitro compound, for use as an organic corrosion inhibitor for the application in Protective Coatings. This product has a moisture content of 5%, an organic content of typ. 49%, and a water-soluble chloride of max. 0.025%. By adding very small quantities of HEUCORIN® RZ and HEUCOPHOS® pigments and thus taking advantage of unique organic-norganic synergies, it is possible to improve existing protective coatings to some significant extent. voir moins | Request Sample |
| K-FLEX® XM-337 | King Industries, Inc. | K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked is...voir plus K-FLEX® XM-337 is an aliphatic saturated polyester diol modifier resin created to implement increased toughness and chemical resistance for solvent borne and high solids systems. It is recommended for use in 1 and 2 component polyurethanes, and blocked isocyanate systems. This product offers low color, UV durability, high hardness, high impact resistance, abrasion resistance and overall increased toughness. It appears as a clear liquid and is soluble in a lot of polar organic solvents such as glycols, alcohols, esters, ketones, aromatics, glycol ethers, and is not soluble in water and aliphatics. voir moins | |
| AKTIFIT Q | Hoffmann Mineral 霍夫曼矿物 | AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler su...voir plus AKTIFIT Q is an activated SILFIT Z 91, produced by modifying the surface with a methacrylic silane. The by-products split off during the treatment reaction are largely removed during the production process which firmly attaches the silane to the filler surface. This helps minimize undesirable side effects, which are potentially encountered with in-situ mixing (direct addition of silane to the compound). voir moins | |
| Nubifer R-5530 | Ferro Pigments | Nubifer R-5530 is a micronized Red Iron Oxide pigment manufactured with a special process that minimizes the presence of agglomerates, providing enhanced dispersibility, color reproducibility and gloss. | |
| SILLITIN Z 89 | Hoffmann Mineral 霍夫曼矿物 | SILLITIN Z 89 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as functional a filler either on its own or combined with extenders or flatting agents. | |
| Nubirox 301 | Ferro Pigments | Nubirox 301 is a zinc and labeling-free, white Anticorrosive pigment. It is a Calcium Strontium Phosphosilicate that allows replacing standard Zinc Phosphate exhibiting similar or better performance in solventborne and solventborne systems. | |
| Relca® PU-415 | Stahl Polymers | Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has go...voir plus Relca® PU-415 is an aqueous anionic dispersion of an aliphatic polyether urethane. It is used in textiles, and as an adhesive for transfer basecoats and coatings. This product is also used in leather, textile, and natural substrate formulations. It has good water resistance properties and good compatibility properties with other binders. voir moins | |
| SILLITIN Z 86 | Hoffmann Mineral 霍夫曼矿物 | SILLITIN Z 86 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| SILLITIN V 88 | Hoffmann Mineral 霍夫曼矿物 | SILLITIN V 88 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| K-FLEX® XM-366 | King Industries, Inc. | K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. I...voir plus K-FLEX® XM-366 is a low viscosity, 100% active, saturated, aliphatic polyester diol with primary hydroxyl groups. This product was made for use as a resin modifier of acrylic/isocyanate and acrylic/melamine systems to expand flexibility and decline VOC. It appears as a clear liquid that is light in color and offers good compatibility and solubility. This product is soluble in glycols, glycol ethers, alcohols, esters, aromatics, ketones, and is insoluble in aliphatic hydrocarbons and water. It can be applied in plastic coatings, aerospace, automotive OEM & refinishes, and VOC compliant systems. voir moins | |
| Nubicoat HRD | Ferro Pigments | Nubicoat HRD is an Ultramarine Blue pigment specifically designed and quality controlled in Coatings with highly reddish undertone. It is much redder than any existing Ultramarine Blue pigment or other color alternatives. | |
| TEGO® Phobe 1409 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 1409 is a siloxane hydrophobing agent. It is suitable for ecolabel compliant formulations. This product offers excellent hydrophobing and beading effects, and is easy to incorporate into the formulation. | Request Sample |
| AKTIFIT PF 115 | Hoffmann Mineral 霍夫曼矿物 | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...voir plus AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). voir moins | |
| Nubix V-60 | Ferro Pigments | Nubix V-60 is an Ultramarine Violet pigment. Ultramarine violets are mostly used in Coatings to provide a bright violet shade to all sort of formulations. The C series are Ultramarines in which there is a special quality control on Lead, Arsenic and Mercu...voir plus Nubix V-60 is an Ultramarine Violet pigment. Ultramarine violets are mostly used in Coatings to provide a bright violet shade to all sort of formulations. The C series are Ultramarines in which there is a special quality control on Lead, Arsenic and Mercury content as well as a microbiological analysis to guarantee the absence of microorganisms in the pigment. voir moins | |
| Nubicoat HTS | Ferro Pigments | Nubicem HTS is an Ultramarine Blue pigment specifically designed and quality controlled in Coatings that provides 40% higher color strength (on average) and enhanced dispersibility, gloss and transparency compared to conventional Ultramarine Blues . | |
| SILLITIN Z 86 PURISS | Hoffmann Mineral 霍夫曼矿物 | SILLITIN Z 86 PURISS is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Nubicoat HWR | Ferro Pigments | Nubicoat HWR is an Ultramarine Blue pigment specifically designed and quality controlled in Coatings with enhanced acid and weather fastness due to its unique silica encapsulation. | |
| AKTIFIT AM | Hoffmann Mineral 霍夫曼矿物 | AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomer...voir plus AKTIFIT AM is an activated SILFIT Z 91, produced by modifying the surface with amino functional silane. It is used as a functional filler either on its own or combined with extenders or matting agents. An optimum effect will be obtained in polar elastomers in combination with sulfur or sulfur donor, amine or bisphenolic crosslinking systems. This product can be used whenever high tensile strength and high modulus, combined with a very low tensile and compression set, are as important as excellent processing and extrusion properties. voir moins | |
| SILLITIN N 85 | Hoffmann Mineral 霍夫曼矿物 | SILLITIN N 85 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinite. Used as a functional filler either on its own or combined with extenders or flatting agents. | |
| Nubirox SP | Ferro Pigments | Nubirox SP is a unique, special particle Zinc Phosphate. It is a white Anticorrosive pigment with high specific surface, much more efficient than conventional Zinc Phosphate. | |
| SILLIKOLLOID P 87 | Hoffmann Mineral 霍夫曼矿物 | SILLIKOLLOID P 87 is a natural combination of corpuscular Neuburg Silica and lamellar kaolinte. Used as a functional filler either on its own or combined with other extenders or flatting agents. | |
| MINEX® 4 | Sibelco | MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...voir plus MINEX® 4 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 6.8 microns. voir moins |
