| TM MC Powder Yellow 387C | New Prismatic Enterprise | TM MC Powder Yellow 387C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with...voir plus TM MC Powder Yellow 387C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from yellow to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Yellow 387C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Green 335C | New Prismatic Enterprise | TM MC Powder Green 335C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with ...voir plus TM MC Powder Green 335C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from green to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Green 335C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Blue 301U | New Prismatic Enterprise | TM MC Powder Blue 301U is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with a...voir plus TM MC Powder Blue 301U is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Blue 301U is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Violet 2728C | New Prismatic Enterprise | TM MC Powder Violet 2728C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wit...voir plus TM MC Powder Violet 2728C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from violet to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Violet 2728C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Black 5C2X | New Prismatic Enterprise | TM MC Powder Black 5C2X is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with ...voir plus TM MC Powder Black 5C2X is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from black to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Black 5C2X is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| Top Protection Coat (Formulation #07-1038A) | Ashland | A top protection coat based on Aquaflow™ NLS 200 rheology modifier. | |
| Efka® FA 4670 | BASF Formulation Additives 巴斯夫配方助剂 | Efka® FA 4670 (formerly Efka® 5070) helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. Due to its wide compatibility and the combination with a polysiloxane, the following advantages can be achieved: reduced dispersion time and stabilization of the pigment dispersion, prevention of flooding and floating, reduced pigment sedimentation, reduced tendency to 'orange-peel', improved gloss and leveling. This product is a high-molecular weight unsaturated polycarboxylic acids and esters, combined with a compatible organically modified polysiloxane. Efka® FA 4670 is especially suitable to stabilize all kinds of pigments and is applied in solvent-based industrial coatings like: alkyd/amino resin combinations; acrylic polyisocyanate systems; nitro-cellulose systems; polyurethane...voir plus Efka® FA 4670 (formerly Efka® 5070) helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. Due to its wide compatibility and the combination with a polysiloxane, the following advantages can be achieved: reduced dispersion time and stabilization of the pigment dispersion, prevention of flooding and floating, reduced pigment sedimentation, reduced tendency to 'orange-peel', improved gloss and leveling. This product is a high-molecular weight unsaturated polycarboxylic acids and esters, combined with a compatible organically modified polysiloxane. Efka® FA 4670 is especially suitable to stabilize all kinds of pigments and is applied in solvent-based industrial coatings like: alkyd/amino resin combinations; acrylic polyisocyanate systems; nitro-cellulose systems; polyurethane- and chlorinated polymer systems; and chlorinated polymers. voir moins | |
| Aradur® 3951 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3951 is a multi-functional polyamide curing agent especially formulated for water-dilutable epoxy resin systems. It was developed for the formulation of two-component anti-corrosion primers for metal, zinc-rich primers and direct-to-metal (DTM) co...voir plus Aradur® 3951 is a multi-functional polyamide curing agent especially formulated for water-dilutable epoxy resin systems. It was developed for the formulation of two-component anti-corrosion primers for metal, zinc-rich primers and direct-to-metal (DTM) coatings for industrial, marine and shipping container applications. When formulated with Araldite® PZ 3961-1 waterborne epoxy resin dispersion, the advantages of low VOC content, fast dry, 7-hour pot life and excellent corrosion protection can be obtained. Aradur® 3951 is stable against formation of hydrogen gas when appropriately formulated with zinc metal dust voir moins | |
| ETERNABRITE® 255-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation...voir plus ETERNABRITE® 255-PA is an aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide very strong metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 255-PA is leafing and 74% non-volatile by weight. This grade is produced as a pigment paste carried in isopropyl alcohol but is not treated to inhibit an aluminum-water gassing reaction. voir moins | |
| Desmophen® NH 1520 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a ...voir plus Desmophen® NH 1520 is a low-viscosit, solvent-free, aminofunctional co-reactant liquid that is used for the formulation of high-solids, two-component polyurethane topcoats and solvent-free coating materials. This product has a water content of < 0.15%, a flash point of approx. 74°C, and an amine value of 189-193mg KOH/g. voir moins | |
| Laromer® WA 9057 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® WA 9057 is an acrylic resin for the formulation of radiation curable coatings for wood, wood products and plastic applications. It is a water-based UV-curable acrylic dispersion. Laromer® WA 9057 has been developed for pigmented and unpigmented p...voir plus Laromer® WA 9057 is an acrylic resin for the formulation of radiation curable coatings for wood, wood products and plastic applications. It is a water-based UV-curable acrylic dispersion. Laromer® WA 9057 has been developed for pigmented and unpigmented primers and topcoats for wooden furniture and plastics. This low- to medium-viscosity liquid can be applied by means of curtain coating and spraycoating in high speed coating equipment. Since Laromer® WA 9057 has good physical drying properties, it is suitable for 3D objects where shadow areas are insufficienlty cured. After physical drying, coatings based on Laromer® WA 9057 give tack free films in shadow areas after UV-curing films with good chemical resistance as well as good scratch resistance and low yellowing are obtained. voir moins | |
| Borchi® Gen SN 95 | OMG Borchers GmbH | Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re...voir plus Borchi® Gen SN 95 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. lt effectively inhibits pigment re-flocculation, thereby stabilizing consistency, color intensity and shade, particularly during prolonged storage of finished paint and paste formulations. This product enhances the gloss and reduces the haze of finishing paints, contains no organic solvents whatsoever and is completely VOC-free. voir moins | |
| Talc, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...voir plus Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. voir moins | |
| TM MC Powder Rose Red 238C | New Prismatic Enterprise | TM MC Powder Rose Red 238C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wi...voir plus TM MC Powder Rose Red 238C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from rose red to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Rose Red 238C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Magenta Rubine Red C | New Prismatic Enterprise | TM MC Powder Magenta Rubine Red C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature control...voir plus TM MC Powder Magenta Rubine Red C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from magenta-rubine to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Magenta Rubine Red C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Charm Green C | New Prismatic Enterprise | TM MC Powder Charm Green C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wi...voir plus TM MC Powder Charm Green C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from charm green to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Charm Green C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Sky Blue 313C | New Prismatic Enterprise | TM MC Powder Sky Blue 313C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers wi...voir plus TM MC Powder Sky Blue 313C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from sky blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Sky Blue 313C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Turkish Blue 320C | New Prismatic Enterprise | TM MC Powder Turkish Blue 320C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controller...voir plus TM MC Powder Turkish Blue 320C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from turkish blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Turkish Blue 320C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Dark Blue 294C | New Prismatic Enterprise | TM MC Powder Dark Blue 294C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers w...voir plus TM MC Powder Dark Blue 294C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from dark blue to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Dark Blue 294C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation...voir plus DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation...voir plus DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation...voir plus DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| Luna PTSI P | DKSH | Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against det...voir plus Luna PTSI P is a low-viscosity reactive additive used as a water scavenger in the formulation of specialty urethane products, including adhesives, sealants and coatings. Luna PTSI P also provides storage stabilization of purified diisocyanates against deterioration and discoloration. The use of Luna PTSI P in the formulation process prevents moisture-related problems. Luna PTSI P reacts rapidly with excess water to form the corresponding carbamic acid, which in turn, undergoes immediate decomposition to form carbon dioxide and non-reacting p-toluenesulfonamide. This product is available in Europe, Asia and North America. voir moins | Request Sample |
| Foamaster® MO 2134 | BASF Formulation Additives 巴斯夫配方助剂 | Foamaster® MO 2134 (formerly Foamaster® 8034) is a defoamer based on mineral oil. It is a highly effective liquid defoamer which can be added at any stage in emulsion paint manufacture. It is especially effective in fine-particle resin emulsions. Although...voir plus Foamaster® MO 2134 (formerly Foamaster® 8034) is a defoamer based on mineral oil. It is a highly effective liquid defoamer which can be added at any stage in emulsion paint manufacture. It is especially effective in fine-particle resin emulsions. Although it is only sparingly dispersible in water, the defoamer disperses easily in paint so that even in a medium-viscosity paint there is no tendency of the defoamer to cream to the surface. voir moins | |
| Undercoat Lacquer (Formulation #3.2358-3) | Hoffmann Mineral 霍夫曼矿物 | Undercoat Lacquer (Formulation #3.2358-3) featuring SILLITIN Z 86. | |
| Rubber Paint (Formulation #A10201.2 [10]) | Hoffmann Mineral 霍夫曼矿物 | Rubber Paint (Formulation #A10201.2 [10]) featuring SILLITIN Z 89. | |
| Irgacure® 500 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Irgacure® 500 is a blend of two photoinitiators. It is used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional monomers. Irgacure® 500 is especially suitable for pigmented UV-curable systems, photoresists and printing plates. This product may be used alone or in combination with suitable amines acting as co-initiators or in combination with amine-modified resins such as Laromer® PO 77 F for applications such as UV-curable clear coatings for paper, metal and plastic materials. Its low viscosity provides an additional advantage lowering the viscosity of the total formulation. As a liquid initiator Irgacure® 500 is especially suitable for the dispersion in water-based UV formulation...voir plus Irgacure® 500 is a blend of two photoinitiators. It is used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional monomers. Irgacure® 500 is especially suitable for pigmented UV-curable systems, photoresists and printing plates. This product may be used alone or in combination with suitable amines acting as co-initiators or in combination with amine-modified resins such as Laromer® PO 77 F for applications such as UV-curable clear coatings for paper, metal and plastic materials. Its low viscosity provides an additional advantage lowering the viscosity of the total formulation. As a liquid initiator Irgacure® 500 is especially suitable for the dispersion in water-based UV formulations. voir moins | |
| Airase® 8070 Deaerator | Evonik Operations GmbH, BL Coating Additives | Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation...voir plus Airase® 8070 Deaerator is a proprietary, formulated, modified-siloxane deaerator designed to eliminate foam, pinholing, and solvent-popping problems in water-based coatings applied by airless (or air-assisted) spray technologies without generating surface defects. Airase® 8070 Deaerator can be especially effective against microfoam because it is designed to leave a defect-free surface, even when thick layers are applied or highly vicous coatings are sprayed. Airase® 8070 Deaerator contains no chemicals that are considered VOCs per the European Solvent Directive or the European Decorative Paint Directive; it contributes no VOCs nder EPA Method 24 testing conditions when evaluated at typical used levels (1% by weight) in a zero-VOC coating formulation. Additionally, Airase® 8070 Deaerator contains no added alkylphenol ethoxylates (APEs) or hazardous air pollutants (HAPs). voir moins | Request Sample |
| CYCAT® 4045 | Allnex | CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluen...voir plus CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. voir moins | Request Sample |
| Desmodur® VL 51 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® VL 51 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a raw material in the formulation of self-levelling two-component polyurethane coatings and sealing compounds as well as solvent-free two-component polyurethane pr...voir plus Desmodur® VL 51 is an aromatic polyisocyanate based on diphenylmethane diisocyanate used as a raw material in the formulation of self-levelling two-component polyurethane coatings and sealing compounds as well as solvent-free two-component polyurethane primers, and also as a component in the formulation of prepolymers. It is a brown liquid with a low viscosity at 25°C of 21.0 ± 5 mPa·s. This product has an acidity (HCI) of < 200mg/kg, an NCO of 32.5 ± 0.8%, and an equivalent weight of approx. 129. Compared with Desmodur® VL, Desmodur® VL 51 has a lower viscosity when mixed with Desmophen® 1145, 1150, 5028 GT and 1380 BT. The end-products are more flexible than combinations with Desmodur® VL. A water scavenger such as molecular sieve paste® 3 Å must be added to the polyol component to prevent any undesired reaction of Desmodur® VL 51 with water. Desmodur® VL 51 is used in the formulation of prepolymers for one- and two-component coatings and for related applications. It has the advantage of easier handling. voir moins | |
| DOUBLEMER® 013 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | DOUBLEMER® 013 is an acrylic monomer which has several advantages like low viscosity, low skin irritation index (PII=0.5), high reactivity and good heat resistance. When used as an additive in formulations cured by ultraviolet light (UV) or electron beam ...voir plus DOUBLEMER® 013 is an acrylic monomer which has several advantages like low viscosity, low skin irritation index (PII=0.5), high reactivity and good heat resistance. When used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB), DOUBLEMER® 013 will exhibit substrate wetting and flow properties, low viscosity and good stability in formulation. Because of its acrylic functional group, after curing, this product will get into the backbone of substrates by photo free radical polymerization. Because of its chemical structure, it tend to be dissolved in water. It could replace NVP in most formulations, as well as water soluble UV application. Formulated UV/EB curable products containing DOUBLEMER® 013 may be applied as a reactivity solvent or adhesive water borne UV formulation. This product is a clear to yellowish liquid. voir moins | |
| Aluminum Silicate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...voir plus Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. voir moins | |
| Calcium Carbonate, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing f...voir plus Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1. Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm/ gauge 7+ NS. voir moins | |
| Interior/Exterior Gloss Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...voir plus Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved- 7+ NS/ <10 μm. voir moins | |
| Interior/Exterior Matt Paint (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...voir plus Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. 5+ NS/ min. of 20 μm. voir moins | |
| Zinc Oxide, Extender Slurries (Formulation #21-10006) | Patcham LTD | Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...voir plus Gradually add cellulosic thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing 10 minutes at 2 ms-1. Grind the mill base using Glass beads for 2 hours at 21 ms-1 μm / gauge 7+ NS. voir moins | |
| Laromer® UA 9059 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laromer® UA 9059 is an aliphatic urethane acrylate, 70% diluted in water. It is used for the formulation of radiation curable coatings for inks, wood, wood products, paper and plastic applications. It has excellent adhesion on wood, and the applicability ...voir plus Laromer® UA 9059 is an aliphatic urethane acrylate, 70% diluted in water. It is used for the formulation of radiation curable coatings for inks, wood, wood products, paper and plastic applications. It has excellent adhesion on wood, and the applicability as a hydroprimer on different wood substrates. Excellent coin test results can be obtained if applied as hydroprimer on parquet. voir moins | |
| DISPEX® Ultra PA 4503 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- a...voir plus DISPEX® Ultra PA 4503 is a dispersing resin with self-emulsifying properties. In combination with DISPEX® Ultra PA 4503, it is suitable for the production of VOC free pigment concentrates. The excellent compatibility of this combination with both water- and solvent-based decorative paint systems means these concentrates are suitable for the production of tinting systems where only low shear forces (shaking machines) are used. The chemical character of DISPEX® Ultra PA 4503 makes it suitable for systems with a wide pH range (5–12). voir moins | |
| CYCAT® 205 | Allnex | CYCAT® 205 catalyst is an amine blocked para-toluene sulfonic acid catalyst supplied in ethylene glycol. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with...voir plus CYCAT® 205 catalyst is an amine blocked para-toluene sulfonic acid catalyst supplied in ethylene glycol. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT® 204 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. It provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. voir moins | Request Sample |
| DOWSIL™ 107F Additive | Dow Performance Silicones Paints, Inks and Coatings | DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and micro...voir plus DOWSIL™ 107F Additive is a low-cyclic silicone foam control agent with high effectiveness in waterborne acrylic clear wood coating varnishes, and acrylic, styrene acrylic and VAE emulsion paint for architectural wall coatings. It reduces defects and microbubbles in the coating film, thereby enhancing the durability of the substrate protection provided by the coating. It also has an excellent environmental and health profile which makes it suitable for the formulation of EU Ecolabel compliant indoor and outdoor paints and varnishes following the criteria set out in decision 2014/312/EU. voir moins | |
| FoamStar® PB 2922 | BASF Formulation Additives 巴斯夫配方助剂 | FoamStar® PB 2922 (formerly Dehydran® 1922) is highly effective defoamer or air release agent particularly suitable for use in powder based emulsion paints and in similar formulations. It can be mixed with all other powder components without any problems....voir plus FoamStar® PB 2922 (formerly Dehydran® 1922) is highly effective defoamer or air release agent particularly suitable for use in powder based emulsion paints and in similar formulations. It can be mixed with all other powder components without any problems. FoamStar® PB 2922 has achieved particularly good results in the manufacture of powder based leveling compounds and mortars as well as plasters based on cement. In these cases, the use of FoamStar® PB 2922 ensures a fast release of air entrapped while incorporating water. The resulting mastics have a smaller content of air pores and show a smooth and bubble-free flow. voir moins | |
| Transparent 1K Wood Filler (Formulation #I11401.1) | Hoffmann Mineral 霍夫曼矿物 | Transparent 1K Wood Filler (Formulation #I11401.1) featuring SILLITIN V 88 and SILLITIN Z 89. | |
| Interior Dispersion Paint (Formulation #F10102.2 [15]) | Hoffmann Mineral 霍夫曼矿物 | Interior Dispersion Paint (Formulation #F10102.2 [15]) featuring SILLITIN Z 89. | |
| Borchi® Gen 0851 | OMG Borchers GmbH | Borchi® Gen 0851 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. Particularly when using carbon blac...voir plus Borchi® Gen 0851 is a high-molecular weight, polyurethane-based wetting and dispersing additive with outstanding wetting and deflocculation properties. It is intended specifically for high-grade waterborne applications. Particularly when using carbon blacks and organic pigments, this product significantly reduces the viscosity of the mill base, enabling the production of highly concentrated pigment pastes. lt effectively inhibits pigment reflocculation, thereby stabilizing consistency, color intensity and shade, particularly during prolonged storage of finished paint and paste formulations. Borchi® Gen 0851 enhances the gloss and reduces the haze of finishing paints. voir moins | |
| DISPEX® AA 4135 NA | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® AA 4135 is an effective polymeric dispersing agent based on acrylic acid sodium salt. | |
| Road Marking Paint (Formulation #S 11401.3B) | Hoffmann Mineral 霍夫曼矿物 | Road Marking Paint (Formulation #S 11401.3B) featuring SILFIT Z 91. | |
| Gloss Lacquer Formula for Airless Spray Application (Formulation #07-1019B) | Ashland | Based on Neocryl* XK-98 acrylic glossy lacquer. | |
| LIOCRYL AM 432 | Synthopol Chemie Germany | LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte a...voir plus LIOCRYL AM 432 is an aqueous, solvent- and plasticizer-free pure acrylic emulsion with a fine particle size. It is particularly suitable for the formulation of primer coats with good wet adhesion. It is a pure acrylic emulsion for use in pigmented matte and silk interior and exterior paints. The binder may be used as an adherend surface for substrates which are difficult to wet (terrazzo tiles), by itself or mixed with cement. It is alkali-stable and displays increased water stability and very good wet adhesion. It possesses shear stability and good stamp adhesion. Completely consolidated films of the binder display good tensile strength and elasticity. voir moins | |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good prese...voir plus ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids. voir moins | Request Sample |
| Acclaim® Polyol 12200 N | Covestro (formerly Bayer MaterialScience) 科思创 | Acclaim® Polyol 12200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, viscous liquid. Acclaim® Polyol 12200 N is suitable for co...voir plus Acclaim® Polyol 12200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, viscous liquid. Acclaim® Polyol 12200 N is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. This product can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Ventilation Primer-Surfacer (Formulation #R10401.0 [1]) | Hoffmann Mineral 霍夫曼矿物 | Ventilation Primer-Surfacer (Formulation #R10401.0 [1]) featuring SILLITIN Z 89. | |
| Universal First Coat (Formulation #R10101.2 [8]) | Hoffmann Mineral 霍夫曼矿物 | Universal First Coat (Formulation #R10101.2 [8]) featuring SILLITIN Z 89. | |
| 1K Hydro Soft Feel Lacquer, Black (Formulation #PCO-0059SF) | Hoffmann Mineral 霍夫曼矿物 | Industrial coating 1K Hydro soft feel lacquer, black without matting agent based on urea methanal condensate Bayhydrol UH 340/1//UH 650. | |
| Transparent Wood Filler (Formulation #FP 31/6) | Hoffmann Mineral 霍夫曼矿物 | Transparent Wood Filler (Formulation #FP 31/6) featuring SILLITIN Z 89. | |
| HALOX® CW-314 | ICL Phosphate Specialty | HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivit...voir plus HALOX® CW-314 by ICL is a patent pending, non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is very effective in enhancing the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It increases the total solar reflectance (TSR) while maintaining the dirt pick-up resistance (DPUR) and prevention mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints. HALOX® CW-314 is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards is required. It is also used in potable water tank linings and pipe coatings. The dosage level for potable water tank linings & pipe coatings is 3-8% based on total formula weight and 10-30% for elastomeric roof coatings containing calcium carbonate & titanium dioxide. It has a shelf life of 36 months. voir moins | Request Sample |
| WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation...voir plus WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). voir moins | |
| Acclaim® Polyol 8200 N | Covestro (formerly Bayer MaterialScience) 科思创 | Acclaim® Polyol 8200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 14.0 ± 1.5 and...voir plus Acclaim® Polyol 8200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 14.0 ± 1.5 and a viscosity at 25°C of 2,850 ± 850. Acclaim® Polyol 8200 N is suitable for the formulation of elastic sealants and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (0.05% by wt. water). voir moins | |
| Acclaim® Polyol 18200 N | Covestro (formerly Bayer MaterialScience) 科思创 | Acclaim® Polyol 18200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 6.0 + 1.0 and...voir plus Acclaim® Polyol 18200 N is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a colorless to yellowish viscous liquid, with a hydroxyl number of 6.0 + 1.0 and a viscosity at 25℃ of 23,000 + 4,000. Acclaim® Polyol 18200 N is suitable for the formulation of elastic sealants and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (0.05% by wt. water). voir moins | |
| White Soft Touch Topcoat (Formulation #07-1085) | Ashland | This formulation utilizes Aquaflow™ NLS-220E and Aquaflow™ NHS-350E. | |
| Joncryl® 8383 (For Industrial Wood Coating Applications) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Joncryl® 8383 is a self-crosslinking acrylic emulsion for outdoor joinery industrial wood coating applications. It has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. Joncryl® 8383 emulsion is also very suitable for water and chemical resistant primers. (It can easily be over coated with a solvent-based system.) Joncryl® 8383 shows excellent water resistance, good hardness, block resistance, and excellent wet adhesion/elasticity (for outdoor purposes). It allows the formulation...voir plus Joncryl® 8383 is a self-crosslinking acrylic emulsion for outdoor joinery industrial wood coating applications. It has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. Joncryl® 8383 emulsion is also very suitable for water and chemical resistant primers. (It can easily be over coated with a solvent-based system.) Joncryl® 8383 shows excellent water resistance, good hardness, block resistance, and excellent wet adhesion/elasticity (for outdoor purposes). It allows the formulation of a coating with a unique balance of chemical resistance, mechanical properties, and appearance. For outdoor purposes, Joncryl® 8383 shows very good wet adhesion. The crosslinking chemistry of Joncryl® 8383 allows drying at room and elevated temperatures. The good clarity, hardness development, and block resistance in combination with water resistance makes this product suitable for replacing some solvent-based coatings. Joncryl® 8383 is recommended for applications such as: interior/exterior wood coatings for millwork applications; interior/exterior concrete applications. voir moins | |
| Transparent Soft Touch Topcoat (Formulation #07-1086) | Ashland | This formulation utilizes Drewplus™ S-4386 Foam Control Agent, Aquaflow™ NLS-220E, Aquaflow™ NHS-350E. | |
| Acclaim® Polyol 4200 | Covestro (formerly Bayer MaterialScience) 科思创 | Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, low-viscousity liquid, with a hydroxyl number of 28.0 ± 1.5 a...voir plus Acclaim® Polyol 4200 is a polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product is a solvent-free, pale, low-viscousity liquid, with a hydroxyl number of 28.0 ± 1.5 and an acid humber of 0.004 - 0.020. Acclaim® Polyol 4200 is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Borchi® Gen DFN | OMG Borchers GmbH | Borchi® Gen DFN is a non-ionic, APEO-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and improves pigment wetting and shortens...voir plus Borchi® Gen DFN is a non-ionic, APEO-free wetting and dispersing additive both for waterborne and for medium-polar solventborne pigment pastes, emulsion paints and surface coatings. It is free of solvents and VOCs and improves pigment wetting and shortens the dispersing process. In mixed pigmented systems, the additive - even when added afterwards - effectively prevents floating of the pigments and thus stabilizes the consistency, color strength and shade of the finished coating and paste formulation. This product is suitable for air-drying and baking emulsion paints and lacquers. The main areas of application are in pure acrylic, styrene-acrylic and styrene-butadiene dispersions. voir moins | |
| MINEX® 12 (Tamms, Il.) | Sibelco | MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulation...voir plus MINEX® 12 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 1.5 microns and is easily dispersed in all conventional vehicle systems. voir moins | |
| Breathable WB Low VOC Primer (Formulation #EF-78) | Huntsman Advanced Materials 亨斯迈先进材料 | This “breathable” concrete primer offers low VOC content, rapid hardness development, and long open “wet” time. Its excellent adhesion to damp concrete and “green” concrete, and high permeability to moisture (compared to a 100% solid or solvent based prim...voir plus This “breathable” concrete primer offers low VOC content, rapid hardness development, and long open “wet” time. Its excellent adhesion to damp concrete and “green” concrete, and high permeability to moisture (compared to a 100% solid or solvent based primer) makes it an ideal primer for “breathable” epoxy flooring systems applied to concrete substrates. voir moins | |
| POLYRON® N New | ICL Phosphate Specialty | POLYRON® N New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. This product is easily soluble since it is agglomerated. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size of the pigment slurry is rapidly achieved, and it is well suitable as dispersing agent for emulsion paints and plasters. This product also slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. The usual dosage of POLYRON® N new in formulation...voir plus POLYRON® N New is a dispersing agent for emulsion paints, plasters, and adhesives. It is a slightly alkaline sodium polyphosphate of medium chain length. This product is easily soluble since it is agglomerated. It improves the storage stability when applied in combination with polyacrylates like LOPON® 890. Due to its dispersing action, optimal particle size of the pigment slurry is rapidly achieved, and it is well suitable as dispersing agent for emulsion paints and plasters. This product also slows down sedimentation, reduces water hardness and offers a good binding capacity with regard to calcium and heavy metal ions. It deflocculates pigments and fillers in aqueous suspensions. Thereby, high solid contents of emulsion paints with low viscosity can be achieved. The usual dosage of POLYRON® N new in formulation is 0.05 – 0.15 %. voir moins | Request Sample |
| Desmophen® 2060 BD | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1...voir plus Desmophen® 2060 BD is a linear polypropylene ether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free and low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,000g, a hydroxyl content of 1.7 ± 0.05 % by wt., and a viscosity at 25°C of 310 ± 25 mPa·s. Desmophen® 2060 BD is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings and adhesives. It can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05% by wt. water). voir moins | |
| Baybond® XL 7270 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup) of 10-14, and a pH value at 20°C (supply form) of 7-8. Baybond® XL 7270 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 7270 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 7270 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation...voir plus Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup) of 10-14, and a pH value at 20°C (supply form) of 7-8. Baybond® XL 7270 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 7270 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 7270 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| Baybond® XL 825 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation...voir plus Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. voir moins | |
| WB DIY Floor Coating (Formulation #EF-97) | Huntsman Advanced Materials 亨斯迈先进材料 | Formulation EF-97 is designed for use on suitably prepared bare or primed concrete floors. The formula offers a long pot life and a long open (“wet edge”) time, making it ideal for do-it-yourself (DIY) coating applications. The coating also offers a high ...voir plus Formulation EF-97 is designed for use on suitably prepared bare or primed concrete floors. The formula offers a long pot life and a long open (“wet edge”) time, making it ideal for do-it-yourself (DIY) coating applications. The coating also offers a high gloss finish and good gloss stability over its pot life, good development of hardness, good abrasion resistance and excellent adhesion to dry or damp concrete. voir moins | |
| Rheotech™ 1800 | Arkema Rheology & Specialty Additives | Rheotech™ 1800 is an associative thickener providing a Newtonian rheology profile.Compared to similar HASE type thickeners, Rheotech™ 1800 shows a unique visco-elastic balance, with a smooth transition towards flow as more shear is applied. It provides to the paints a liquid to creamy appearance while showing outstanding flow ability. Belonging to a high performing product line, Rheotech™ 1800 meets most advanced requirements: efficiency, optimized rheology profile, ease of use, pigment compatibility, versatility, water resistance. Rheotech™ 1800 offers advantages when surfactants and/or electrolytes are already present or incorporated to the formulation and also contributes to limit viscosity drop at tinting and to stabilize colored formulation...voir plus Rheotech™ 1800 is an associative thickener providing a Newtonian rheology profile.Compared to similar HASE type thickeners, Rheotech™ 1800 shows a unique visco-elastic balance, with a smooth transition towards flow as more shear is applied. It provides to the paints a liquid to creamy appearance while showing outstanding flow ability. Belonging to a high performing product line, Rheotech™ 1800 meets most advanced requirements: efficiency, optimized rheology profile, ease of use, pigment compatibility, versatility, water resistance. Rheotech™ 1800 offers advantages when surfactants and/or electrolytes are already present or incorporated to the formulation and also contributes to limit viscosity drop at tinting and to stabilize colored formulations at storage. voir moins | Request Sample |
| Loxanol® OT 5846 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® OT 5846 (formerly Loxanol 842® DP-6) is a pumpable additive, stable during storage and easy to handle, used to prolong the «open time» of latex decorative masonry finishes. It is a highly effective additive based on a straight chain fatty alcohol...voir plus Loxanol® OT 5846 (formerly Loxanol 842® DP-6) is a pumpable additive, stable during storage and easy to handle, used to prolong the «open time» of latex decorative masonry finishes. It is a highly effective additive based on a straight chain fatty alcohol. It prolongs the 'open time' and often provides elastification whereby cracks in plaster are avoided to a large extent. As far as water adsorption of latex masonry finishes is concerned, tests have shown a neutral behaviour of Loxanol® OT 5846. This product is a white, pumpable paste. voir moins | |
| Loxanol® OT 5840 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® OT 5840 (formerly Loxanol® DPN) is a liquid additive supplied in the form of an easy to incorporate emulsion. It prolongs the open time and reduces the cracking of emulsion paints, organo silicate and silicone resin based mortars. When incorpora...voir plus Loxanol® OT 5840 (formerly Loxanol® DPN) is a liquid additive supplied in the form of an easy to incorporate emulsion. It prolongs the open time and reduces the cracking of emulsion paints, organo silicate and silicone resin based mortars. When incorporated into plasters, Loxanol® OT 5840 prolongs the workable time. This allows a uniform structure to be maintained during the application period. Loxanol® OT 5840 gives the mortar a pliable structure and also prevents cracking due to its plasticizing effect. This liquid, white emulsion has no effect on the water absorbtion. voir moins | |
| Heat Resistant Anti-Corrosive Paint up to 650°C (Formulation #R11402.0 [1]) | Hoffmann Mineral 霍夫曼矿物 | Heat Resistant Anti-Corrosive Paint (Formulation #R11402.0 [1]) featuring SILLITIN V 85. | |
| ALKATERGE®-E Nonvolatile Surface Active Agent | Dow Consumer & Industrial Solutions 陶氏消费品及工业解决方案事业部 | ALKATERGE®-E Nonvolatile Surface Active Agent is highly soluble in most organic liquids, but is only very slightly soluble in water. Even so, a concentration of 0.001% by weight of ALKATERGE®-E in water will reduce its surface tension to about 40 dynes per centimeter. Although it does not lower the surface tension of mineral oil, the presence of 0.1% in a mineral oil reduces its interfacial tension against water. ALKATERGE®-E will react with mineral acids to form salts, some of which are water soluble and produce stable foams. These salts of mineral acids or the salts of lower monobasic organic acids, are very effective wetting agents. Such salts in aqueous systems gradually hydrolyze the oxazoline ring to the amide structure. It forms oil-soluble soaps with the higher fatty acids. The wetting power of these salts and soaps is frequently increased by the addition of alcohols or glycols. Solutions of the salts of ALKATERGE®-E may be used as penetrants in the paper and textile industries, and in the formulation...voir plus ALKATERGE®-E Nonvolatile Surface Active Agent is highly soluble in most organic liquids, but is only very slightly soluble in water. Even so, a concentration of 0.001% by weight of ALKATERGE®-E in water will reduce its surface tension to about 40 dynes per centimeter. Although it does not lower the surface tension of mineral oil, the presence of 0.1% in a mineral oil reduces its interfacial tension against water. ALKATERGE®-E will react with mineral acids to form salts, some of which are water soluble and produce stable foams. These salts of mineral acids or the salts of lower monobasic organic acids, are very effective wetting agents. Such salts in aqueous systems gradually hydrolyze the oxazoline ring to the amide structure. It forms oil-soluble soaps with the higher fatty acids. The wetting power of these salts and soaps is frequently increased by the addition of alcohols or glycols. Solutions of the salts of ALKATERGE®-E may be used as penetrants in the paper and textile industries, and in the formulation of metal cleaners. voir moins | |
| Borchers® LH 10 | OMG Borchers GmbH | Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. Thi...voir plus Borchers® LH 10 is used as an accelerator for waterborne, chemical cross-linking, two-component coats like PU-Systems. Due to the strong acceleration of the chemical reaction, a reduced pot-life might occur. High addition rates might reduce the gloss. This product improves the drying of chemically curing systems, such as aqueous two-component polyurethane coatings. At the same time, scratch resistance, hardness and mechanical persistence are positively influenced. In higher concentrations Borchers® LH 10 has a matting effect, and therefore should not be used in high gloss formulations. voir moins | |
| Desmophen® 5035 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 5035 BT is a sovent-free, pale, viscous trifunctional polypropylene ether polyol liquid that is used in the formulation of solvent-free and low-solvent polyurethanes. It is ideal for combination with Desmodur® in the formulation of solvent-free...voir plus Desmophen® 5035 BT is a sovent-free, pale, viscous trifunctional polypropylene ether polyol liquid that is used in the formulation of solvent-free and low-solvent polyurethanes. It is ideal for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. This product has an OH equivalent weight of approx. 1,600g, a hydroxyl number of 35.0 ± 2.0mg KOH/g, and a viscosity at 25°C of 860 ± 70 mPa·s. Desmophen® 5035 BT is suitable for combination with many Desmodur® products in the formulation of elastic coatings and adhesives. It is suitable as a raw material in the formulation of low-solvent reactive adhesives and coatings. Desmophen® 5035 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). voir moins | |
| MINEX® 10 (Tamms, Il.) | Sibelco | MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulation...voir plus MINEX® 10 (Tamms, Il.) ultra-fine functional fillers and extenders are proven performance enhancers in a broad range of paints, coatings, adhesives, sealants, and inks. Excellent brightness, tint retention, and weatherability can be achieved in exterior paints. Improved color, sheen uniformity, chemical and stain resistance, and durability result when this product is used in interior paint formulations. It has a median particle size of 2.1 microns. voir moins | |
| MINEX® 10 | Sibelco | MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product ha...voir plus MINEX® 10 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 2.1 microns and is easily dispersed in all conventional vehicle systems. voir moins | |
| Foamaster® MO NXZ | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Foamaster® MO NXZ is a turbid amber liquid defoamer for emulsion paints and adhesive systems. It is a formulation based on hydrocarbons and non-ionic surfactants. Foamaster® MO NXZ is a defoamer for emulsion paints based on styrene-butadiene, acrylic, pol...voir plus Foamaster® MO NXZ is a turbid amber liquid defoamer for emulsion paints and adhesive systems. It is a formulation based on hydrocarbons and non-ionic surfactants. Foamaster® MO NXZ is a defoamer for emulsion paints based on styrene-butadiene, acrylic, polyvinyl chloride and its copolymers, ethylene-vinyl acetate, vinylidene chloride and water-soluble alkyds. voir moins | |
| Bayhydrol® UH 650 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch ...voir plus Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch coatings. This product has an Efflux time at 23°C, (4mmcup) of 12-30, a non-volatile content (1g / 1h / 125°C) of 48-52, and a pH value of 6-8. When used in two-layer systems with two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 650 are characterized by good adhesion to many types of plastics, good overcoatability and good water resistance. The metallic basecoat can be oversprayed with a two-component polyurethane clearcoat after predrying e.g. for 5 min at an ambient temperature of 80°C or for 15 min at room temperature. voir moins | |
| Doublecure® 1819DW | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a d...voir plus Doublecure® 1819DW is a photoinitiator for waterborne UV radiation curing systems. It is especially suited for the curing of pigmented water-borne polyurethane dispersions and the daylight curing of PU dispersed-based clearcoats. Doublecure® 1819DW is a dispersion of Bis-Acyl-Phosphine Oxide in water. This white to slightly yellow liquid can be used in combinations with other photoinitiators such as Doublecure® 173. It can be used in UV curable formulations for clear or pigmented coatings on wood, metal, plastic, paper as well as for printing inks. In addition, it allows curing of thick sections due to the outstanding absorption. voir moins | |
| Desmophen® 1380 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1380 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosit...voir plus Desmophen® 1380 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosity at 25°C of 600 ± 50 mPa·s. This product has an OH equivalent weight of approx. 146g, a hydroxyl number of 385 ± 15mg KOH/g, and an acid number of ≤ 0.5mg KOH/g. Desmophen® 1380 BT is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Desmophen® 1380 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). voir moins | |
| Desmophen® 1400 BT | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1400 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosit...voir plus Desmophen® 1400 BT is a trifunctional polypropylene polyether polyol that is suitable for combination with Desmodur® in the formulation of solvent-free or low-solvent polyurethanes. It is a solvent-free, pale-colored, low-viscosity liquid, with a viscosity of 370 ± 40 mPa·s. This product has an acid number of max. 0.1mg KOH/g, an OH equivalent weight of approx. 140g, and a hydroxyl number of 400 ± 20mg KOH/g. Desmophen® 1400 BT is suitable for combination with many Desmodur® products in the formulation of solvent-free elastic coatings, adhesives and sealants. Desmophen® 1400 BT can be thinned with solvents such as esters, ketones and aromatics. Only PU grade solvents should be used (< 0.05 % by wt. water). voir moins | |
| Araldite® GY 6020 | Jubail Chemical Industries Co. | Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of...voir plus Araldite® GY 6020 is an unmodified, high viscosity epoxy resin based on Bisphenol A. This product is characterized by its adhesion properties and flexibility as well as its resistance to chemicals and water. Araldite® GY 6020 is used in the formulation of filament adhesives. voir moins | |
| Cappoxyt Yellow 4212X | Ferro Pigments | Cappoxyt Yellow 4212X is a transparent iron oxide yellow, especially developed for the formulation of wood protection paints (lasure). It offers better dispersibility than any comparable product on the market. Water or Solvent based pigment concentrates p...voir plus Cappoxyt Yellow 4212X is a transparent iron oxide yellow, especially developed for the formulation of wood protection paints (lasure). It offers better dispersibility than any comparable product on the market. Water or Solvent based pigment concentrates produced with Cappoxyt Yellow 4212X show good storage stability. voir moins | |
| Exilva® F 01-L | Borregaard ChemCell | Exilva® F 01-L is a bio-based pre-activated multifunctional additive. Exilva® F 01-L increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...voir plus Exilva® F 01-L is a bio-based pre-activated multifunctional additive. Exilva® F 01-L increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. voir moins | |
| Exilva® F 01-V | Borregaard ChemCell | Exilva® F 01-V is a bio-based pre-activated multifunctional additive. Exilva® F 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...voir plus Exilva® F 01-V is a bio-based pre-activated multifunctional additive. Exilva® F 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. voir moins | |
| Exilva® P 01-V | Borregaard ChemCell | Exilva® P 01-V is a bio-based pre-activated multifunctional additive. Exilva® P 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...voir plus Exilva® P 01-V is a bio-based pre-activated multifunctional additive. Exilva® P 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. voir moins | |
| WorléePol® 194 | Worlée-Chemie G.m.b.H. | WorléePol® 194 is a water thinnable, oil free, branched polyester resin. W´Pol 194 is a very reactive polyester resin for the manufacture of water thinnable stoving primers, fillers and top coats. Primers and fillers based on W´Pol 194 show excellent mechanical properties. W´Pol 194 is also very much suitable for the formulation...voir plus WorléePol® 194 is a water thinnable, oil free, branched polyester resin. W´Pol 194 is a very reactive polyester resin for the manufacture of water thinnable stoving primers, fillers and top coats. Primers and fillers based on W´Pol 194 show excellent mechanical properties. W´Pol 194 is also very much suitable for the formulation of non-yellowing, high gloss top coats with good resistance to chemicals. voir moins | |
| MINEX® 7 | Sibelco | MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has...voir plus MINEX® 7 is a micronized functional filler and/or extender produced from nepheline syenite; a naturally occurring, silica deficient, sodium-potassium alumina silicate. It adds performance and value across a broad spectrum of applications. This product has a median particle size of 3.5 microns and is easily dispersed in all conventional vehicle systems. voir moins | |
| Bayhydrol® A 2227/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with hi...voir plus Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41-43, a viscosity at 23°C, (D = approx. 40 s-1) of 700 - 2,500, an acid value of 7-10, and a pH (1:3 in demineralised water) of 7,5 - 8,5. Bayhydrol® A 2227/1 is characterised by its good pigment wetting properties and high shear stability. Bead and sand mills have proved suitable as grinding equipment. Grinding temperatures of up to approx. 50°C have no detrimental effect on quality of the coating. Given the many different pigments available, the storage stability should always be tested. The rutile titanium dioxide pigments of the Tronox range, especially Tronox® R-KB-4, are particularly suitable. voir moins | |
| N-Octadecyl vinyl ether, ODVE | BASF SE, Intermediates Division 巴斯夫中间体 | N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulation...voir plus N-Octadecyl vinyl ether, ODVE is used as raw material for coatings defoamers, waxes, lubricants, pigment additives, vinyl homo- and copolymers (cationic mechanism). Reactive diluent for epoxy silanes and silicon acrylate-based release coatings. Copolymers of n-Octadecyl vinyl ether are used as formulation additive in water- and solvent borne coatings formulations. N-Octadecyl vinyl ether improves hydrophobicity of polymers as well as surface active behavior. voir moins | |
| DMPA® Dimethylolpropionic Acid | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of wat...voir plus DMPA® Dimethylolpropionic Acid unique and versatile hindered diol molecule with both hydroxyl and carboxy functionality. DMPA is an odourless, free flowing white crystalline solid which provides superior advantages in the formulation and processing of water soluble resins. This product has a neutralization equivalent of 141.0 max., a decomposition temperature of 230°C, and a water insolubles amount of 50.0ppm max. The neopentyl structure of this trifunctional compound, having two primary hydroxyl groups and one tertiary carboxylic group, permits simplified processing by allowing the combining of all reactants in a single kettle charge. Good control of the reaction is possible due to the slower esterification rate of the tertiary carboxyl, assuring a uniform distribution of carboxyl groups along the resin backbone. The free acid group actively promotes resin water solubility or water dispersibility after neutralization with a base, easily introduces a polar group to improve coating adhesion and synthetic fiber dye receptivity, and increases the alkali solubility of deposited films. voir moins | |
| Foamaster® MO NDW | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Foamaster® MO NDW is a turbid amber liquid defoamer for latex systems. It is a formulation based on hydrocarbons and non ionic surfactants that continues to defoam effectively, even after months of storage. It contributes to excellent brushability and doe...voir plus Foamaster® MO NDW is a turbid amber liquid defoamer for latex systems. It is a formulation based on hydrocarbons and non ionic surfactants that continues to defoam effectively, even after months of storage. It contributes to excellent brushability and does not cause fish-eyes and has no effect on the final paint film. Foamaster® MO NDW is effective in all systems based on synthetic latex, especially those based on styrene-butadiene, polyvinyl acetate, acrylic and water-soluble alkyds. voir moins | |
| Araldite® GY 257 | Jubail Chemical Industries Co. | Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and acid. Araldite® GY 257 is used in the formulation...voir plus Araldite® GY 257 is a low viscosity epoxy resin based on Bisphenol A modified with an aromatic glycidyl ether. This product is characterized by its processing properties, mechanical properties, surface penetration, and resistance to chemicals, water, and acid. Araldite® GY 257 is used in the formulation of solvent-free coatings and structure adhesives. voir moins | |
| Nubivan Y-901 | Ferro Pigments | Nubivan Y-901 is Nubiola's greenish yellow Bismuth Vanadate (BiVO4, C.I. 771740, PY 184). This product is equally suitable for pigmenting solvent-based and solvent-free paints. It allows formulating powder, coil and heat resistant coatings without showing...voir plus Nubivan Y-901 is Nubiola's greenish yellow Bismuth Vanadate (BiVO4, C.I. 771740, PY 184). This product is equally suitable for pigmenting solvent-based and solvent-free paints. It allows formulating powder, coil and heat resistant coatings without showing noticeable color changes. voir moins | |
| Coapur™ 975 W | Arkema Rheology & Specialty Additives | Coapur™ 975 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high ...voir plus Coapur™ 975 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It offers a unique pseudoplastic rheology profile, performing strongly at medium shear rates while contributing significantly at high shear rates. voir moins | Request Sample |
| Organosilane NOEO | Dalian Onichem Co., Ltd. 大连奥利凯化工有限公司 | Organosilane NOEO is a colorless to pale yellow liquid which boils at 98°C. It is high purity, undiluted monomeric alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon...voir plus Organosilane NOEO is a colorless to pale yellow liquid which boils at 98°C. It is high purity, undiluted monomeric alkylalkoxysiloxane. When diluted with an appropriate solvent, this product can be used in the formulation of water repellent products. Upon proper application, the formulated product will penetrate and provide water repellency by chemically reacting with the cementitious substrate. Treated substrates are hydrophobic and retain their original appearance. voir moins | Request Sample |
| Nubirox 106 in Styrene-Acrylic Primer (Formulation #EAA 18723) | Ferro Pigments | This styrene-acrylic primer features Nubirox 106 & Nubirox FR-10. |
