| NUOSEPT® BM11 | Arxada – Troy Corporation | NUOSEPT® BM11 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM11 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM11 is f...voir plus NUOSEPT® BM11 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM11 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM11 is free of formaldehyde, CIT, VOC and AOX. voir moins | |
| NUOSEPT® BM21 | Arxada – Troy Corporation | NUOSEPT® BM21 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM21 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM21 is f...voir plus NUOSEPT® BM21 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM21 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM21 is free of formaldehyde, CIT, VOC and AOX. voir moins | |
| NUOSEPT® BM22 | Arxada – Troy Corporation | NUOSEPT® BM22 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22 is f...voir plus NUOSEPT® BM22 is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22 is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22 is free of formaldehyde, CIT, VOC and AOX. voir moins | |
| NUOSEPT® BM22A | Arxada – Troy Corporation | NUOSEPT® BM22A is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22A is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22A i...voir plus NUOSEPT® BM22A is a broad-spectrum wet-state preservative used to prevent deterioration and degradation of aqueous systems caused by bacteria, fungi and yeast. NUOSEPT® BM22A is a highly concentrated, ecologically responsible formulation. NUOSEPT® BM22A is free of formaldehyde, CIT, VOC and AOX. voir moins | |
| RESYDROL® AN 6481w/70BBP | Allnex | Resydrol® AN 6481W/70BBP is an oil free polyester, emulsifiable in water. It is used as a co-binder in combination with melamine resins and/or polyurethane dispersions for formulation of water dilutable industrial paints. | Request Sample |
| RESYDROL® AN 6483/30WA | Allnex | RESYDROL® AN 6483/30WA is an oil free polyester, emulsifiable in water. It is used as a co-binder in combination with melamine resins and/or polyurethane dispersions for formulation of water dilutable industrial paints. | Request Sample |
| HYDRO PLIOLITE™ 211 | Synthomer | HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO...voir plus HYDRO PLIOLITE™ 211 is a modified styrene-acrylic copolymer dispersion developed for formulation of water-borne intumescent coatings. HYDRO PLIOLITE™ 211 has excellent water resitance that allows intumescent coatings to resist to outdoor conditions. HYDRO PLIOLITE™ 211 is designed for intumescent coatings for fire protection from R30 to R120. voir moins | |
| LIOPUR PFL 1130 | Synthopol Chemie Germany | LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. L...voir plus LIOPUR PFL 1130 is an emulsifier-free, oil-modified aliphatic polyurethane dispersion. After air-drying, film coatings based on LIOPUR PFL 1130/30% form transparent films which are tack-free and exhibit very good surface hardness and scratch resistance. LIOPUR PFL 1130/30% is suitable for the formulation of 1-pack wood paints which are sandable after one to two hours. LIOPUR PFL 1130/30% as sole binder and in combination with acrylate dispersions possess excellent chemical resistance and good abrasion resistance. voir moins | |
| Drewplus™ TS-4384 Foam Control Agent | Ashland | Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-glos...voir plus Drewplus™ TS-4384 Foam Control Agent is a proprietary non-ionic formulation of silica derivatives, silicones and surface active agents for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss acrylic architectural paints, water- based parquet lacquers. Excellent results have also been obtained in acrylic anti- corrosive primers, flexographic printing inks and water-reducible alkyd based systems. Drewplus™ TS-4384 foam control agent is highly efficient and exhibits excellent persistency. voir moins | |
| Cromophtal® Yellow L 1084 HD (old: Irgazin® Yellow 2084) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Cromophtal® Yellow L 1084 HD (old: Irgazin® Yellow 2084) is a medium-yellow opaque benzimidazolone with good durability in both full shade and reduction. Good rheological characteristics allow good formulation flexibility. The Colour Index for this produc...voir plus Cromophtal® Yellow L 1084 HD (old: Irgazin® Yellow 2084) is a medium-yellow opaque benzimidazolone with good durability in both full shade and reduction. Good rheological characteristics allow good formulation flexibility. The Colour Index for this product is Pigment Yellow 154 | 11781. It is suitable for applications such as: baking finishes, water-based, acrylic/isocyanate, acid-curable, amine-curable, and air-drying. voir moins | |
| Bayhydrol® A 145 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 145 is a water-reducible, hydrofunctional polyacrylic dispersion that is used in the formulation of aqueous two-pack clear topcoats for vehicle repair applications, heavy transport finishing and industrial coating. It can be used in combinati...voir plus Bayhydrol® A 145 is a water-reducible, hydrofunctional polyacrylic dispersion that is used in the formulation of aqueous two-pack clear topcoats for vehicle repair applications, heavy transport finishing and industrial coating. It can be used in combination with amino resins or blocked polyisocyanates for waterborne, one-component, industrial baking coatings. This product has an acid value of 10 ± 3, a viscosity at 23°C, (D = approx. 40 s-1) of 950 ± 550, and a non-volatile content (1g / 1h / 125°C/ convection oven) of 45 ± 2. Bayhydrol® A 145 has good pigment wetting properties and high shear stability. Bead mills have proved suitable as grinding equipment. Only pigments and extenders with a minimal water-soluble content should be used. Bayhydrol® A 145 combined with aliphatic polyisocyanates yields high-gloss topcoats which can be dried at room temperature or force-dried, e.g. at 80°C. The cured paint films are hard and flexible with good single-coat adhesion and good resistance to solvents and water. voir moins | |
| RHEOBYK-425 | BYK 毕克 | RHEOBYK-425 is a liquid, VOC-free rheology additive for aqueous systems to set the in-can viscosity and to improve the anti-sagging and anti-settling properties. It is suitable for all kinds of aqueous coatings, printing inks, and adhesives in order to improve the anti-sagging properties and set the required in-can viscosity of the formulation...voir plus RHEOBYK-425 is a liquid, VOC-free rheology additive for aqueous systems to set the in-can viscosity and to improve the anti-sagging and anti-settling properties. It is suitable for all kinds of aqueous coatings, printing inks, and adhesives in order to improve the anti-sagging properties and set the required in-can viscosity of the formulation. The resulting increase in viscosity simultaneously improves the storage stability with reduced settling. When grinding pigment pastes, the additive can also increase the millbase viscosity and therefore improve the dispersion conditions. voir moins | |
| Bayhydrol® UV 2689/1 XP | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2689/1 XP is a UV-curable aliphatic polyurethane dispersion, which can be used in the formulation of industrial waterborne UV clear and pigmented coatings. Main applications of this product are plastic coatings (e.g mobile phones) and wood c...voir plus Bayhydrol® UV 2689/1 XP is a UV-curable aliphatic polyurethane dispersion, which can be used in the formulation of industrial waterborne UV clear and pigmented coatings. Main applications of this product are plastic coatings (e.g mobile phones) and wood coatings. Before UV curing, the surface of dried films is soft and slightly tacky, whereas after UV-curing, the coatings are hard with high chemical and mechanical resistance. The product is suitable to achieve high gloss coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 40.0-44.0, a flow time at 23°C, (4 mm cup) of 15.0-50.0, and a pH level of 7.0-8.5. This product is especially suitable for 3C plastic applications e.g. mobile phones and laptops where high performance coatings are required. It is possible to formulate hard high gloss or deep matt clear coats as well as single layer metallic coatings. The resulting coating provides excellent performance meeting the strict requirements of 3C applications. voir moins | |
| Tolonate™ HDT-LV2 | Vencorex | Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used ...voir plus Tolonate™ HDT-LV2 is a solvent-free, very low ciscosity aliphatic polyisocyanate based on Hexamethylene Diisocyanate trimer (HDI homopolymer). This product is supplied at 100% solids and is designed to reduce VOC emissions of the formulations. It is used for very high solids, low VOC, two component polyurethanes coatings and varnishes. This product is also suggested for solventfree and waterborne polyurethane systems as well as polyurethane resin synthesis intermediates. voir moins | |
| Aradur® 39 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 39 Epoxy Curing Agent is a waterborne amine curing agent designed for use in formulating two-component, ambient-cured coatings without the use of volatile organic compounds (VOC). It is supplied as 50% solids in water and does not contain organic ...voir plus Aradur® 39 Epoxy Curing Agent is a waterborne amine curing agent designed for use in formulating two-component, ambient-cured coatings without the use of volatile organic compounds (VOC). It is supplied as 50% solids in water and does not contain organic solvents. It may be diluted with water down to 30% solids (wt.), but may become hazy. Aradur® 39 is not suitable for combination with solid resin dispersions due to insufficient coalescence of the cast films. In combination with liquid epoxy resins, zero-VOC, fast drying films with good water vapor transmission (breath-ability) and adhesion properties can be formulated. voir moins | |
| Neboplast® MB 8730 | NECARBO B.V. | Neboplast® MB 8730 is an aqueous dispersion of an acrylic ester copolymer. This white liquid is chemical, outdoor, water, and water whitening resistant, APE free, and has low dirt pick-up. Neboplast® MB 8730 finds use in the formulation of high quality in...voir plus Neboplast® MB 8730 is an aqueous dispersion of an acrylic ester copolymer. This white liquid is chemical, outdoor, water, and water whitening resistant, APE free, and has low dirt pick-up. Neboplast® MB 8730 finds use in the formulation of high quality indoor and outdoor paints and lacquers, and on alkali surfaces such as concrete coatings. voir moins | |
| Neboplast® MB 8740 | NECARBO B.V. | Neboplast® MB 8740 is an aqueous dispersion of an acrylic ester copolymer. This white liquid is APE free, has low water absorption, is water whitening resistant, and is compatible with pigments, extenders, thickeners, and other commonly used additives. Neboplast® MB 8740 finds application as a binder for the formulation...voir plus Neboplast® MB 8740 is an aqueous dispersion of an acrylic ester copolymer. This white liquid is APE free, has low water absorption, is water whitening resistant, and is compatible with pigments, extenders, thickeners, and other commonly used additives. Neboplast® MB 8740 finds application as a binder for the formulation of top quality indoor and outdoor emulsion paints. voir moins | |
| Neboplast® SB 8765 | NECARBO B.V. | Neboplast® SB 8765 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake, pigment binding properties, and is alkali and water resistant. Neboplast® SB 8765 forms a flexible film and finds application in the formulation...voir plus Neboplast® SB 8765 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake, pigment binding properties, and is alkali and water resistant. Neboplast® SB 8765 forms a flexible film and finds application in the formulation of indoor and outdoor coatings, sealants, adhesives, and crack-binding systems. voir moins | |
| EFKA® FA 4666 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents flooding/floating and stabilizes pigment dispersion. EFKA® FA 4666 is especially suited for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane...voir plus EFKA® FA 4666 is a high molecular weight unsaturated carboxylic acid that prevents interfacial tension between the hydrophilic pigments and the binder. This wetting and dispersing additive reduces dispersion time and pigment sedimentation, prevents flooding/floating and stabilizes pigment dispersion. EFKA® FA 4666 is especially suited for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane systems, acrylic polyisocyanate systems (2-pack acrylics) and chlorinated polymers. voir moins | |
| Kingcure X-980W | Sanho Chemical Co., Ltd. | Kingcure X-980W is a waterborne, modified polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure X-980W is most commonly used in high-gloss coating...voir plus Kingcure X-980W is a waterborne, modified polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 1.13. Kingcure X-980W is most commonly used in high-gloss coating formulation applications. voir moins | |
| Strodex™ PK-0VOC | Ashland | Strodex™ PK-0VOC is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Dispersogen® 2774 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pig...voir plus Dispersogen® 2774 is a nonionic dispersing agent for pigments and minerals. It is used as a dispersing agent for aqueous and solvent based pigment preparations and printing inks. Dispersogen® 2774 is specially suitable for carbon black and for organic pigments in aqueous pigment preparations. The advantages of Dispersogen® 2774 are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. This yellowish, viscous to pasty liquid is composed of a novolac alkoxylate. voir moins | |
| Bayhydrol® U XP 2698 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH co...voir plus Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH content of approx. 0.8. Bayhydrol® U XP 2698 can be used in combination with flexible polyurethane dispersions, e.g. Bayhydrol® UH 340/1, UH 650, UH 2305, UH XP 2658 and UH XP 2660 to formulate soft-touch and suede-effect coatings. The suitable polyisocyanate components are Bayhydur® 304, 3100, XP 2655 and also Desmodur® N 3600 and N 3900. voir moins | |
| Nipacide SDF | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide SDF is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against fungal spoilage in the dry state. Nipacide SDF is a Glycol based liquid. It is described chemically as unique carbendazim and diuron free formulation...voir plus Nipacide SDF is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against fungal spoilage in the dry state. Nipacide SDF is a Glycol based liquid. It is described chemically as unique carbendazim and diuron free formulation of 3-iodo-2-propynylbutylcarbamate and octyl isothiazolinone. Nipacide SDF is recommended for a wide range of applications including adhesives and paint where protection against fungi is required in the dry state. voir moins | |
| EFKA® FA 4665 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane...voir plus EFKA® FA 4665 helps to prevent interfacial tension between the hydrophilic pigments/extenders and the binder. It is a high-molecular weight unsaturated carboxylic acid, combined with a very compatible organically modified polysiloxane. This transparent, slightly brownish liquid is especially suitable for medium to high-polarity binder systems, for example: alkyd/amino resin combinations, nitro-cellulose systems, polyurethane- and chlorinated polymer systems, acrylic polyisocyanate systems (2-pack acrylics), and chlorinated polymers. EFKA® FA 4665 is not compatible with white spirit or paints which are diluted with white spirit. voir moins | |
| Epilink™ 360 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC...voir plus Epilink™ 360 Curing Agent is a modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC epoxy coatings with handling and performance properties typical of solventborne formulations. voir moins | Request Sample |
| Neboplast® SB 8757 | NECARBO B.V. | Neboplast® SB 8757 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate, plasticizer, and ammonia free, and is alkali and water resistant. Neboplast® SB 8757 finds use in the formulation of top quality...voir plus Neboplast® SB 8757 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate, plasticizer, and ammonia free, and is alkali and water resistant. Neboplast® SB 8757 finds use in the formulation of top quality indoor and outdoor emulsion wall paints, roof coating formulations, sealants, mineral substrate adhesives, and cement modification. voir moins | |
| Strodex™ PK-90 | Ashland | Strodex™ PK-90 is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved gloss and color acceptance in water borne latex paints. | |
| Heucophos® ZMP In 1-Part Polyurethane (Formulation #CI-112) | Heubach/Heucotech, Ltd. | ||
| Aquaflow™ XLS-530 | Ashland | Aquaflow™ XLS-530 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| EMULTEX™ FR 728 | Synthomer | EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 7...voir plus EMULTEX™ FR 728 is a specially colloid stabilised vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of water-borne intumescent coatings. EMULTEX™ FR 728 provides a quick char formation with high expansion factor. EMULTEX™ FR 728 is designed for intumescent coatings for fire protection up to R60. voir moins | |
| EMULTEX™ FR 797 | Synthomer | EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ ...voir plus EMULTEX™ FR 797 is a specially colloid stabilised and vinyl acetate - vinyl versatate copolymer dispersion developed for formulation of waterborne intumescent coatings. EMULTEX™ FR 797 provides a slow char formation with medium expansion factor. EMULTEX™ FR 797 is recommended for intumescent coatings with fire protection up to 120min. voir moins | |
| Aradur® 3987 | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3987 is a modified polyamine adduct dissolved in water. It is distinguished by high reactivity, short curing times, high chemical resistance, and high thermal resistance. This product can be used with liquid epoxy resins like Araldite® GY 776, liquid resin emulsions like Araldite® PZ 33757-67, or with solid type 1 resin dispersions like Araldite® PZ 3961-1 for the formulation...voir plus Aradur® 3987 is a modified polyamine adduct dissolved in water. It is distinguished by high reactivity, short curing times, high chemical resistance, and high thermal resistance. This product can be used with liquid epoxy resins like Araldite® GY 776, liquid resin emulsions like Araldite® PZ 33757-67, or with solid type 1 resin dispersions like Araldite® PZ 3961-1 for the formulation of water-based coatings and layers onto mineral and metallic substrates. voir moins | |
| NOVINOX PAT30 | SNCZ Société Nouvelle des Couleurs Zinciques | NOVINOX PAT30 is a corrosion inhibiting pigment that allows the formulation of paints without the label toxic for the environment. It is a stable and non-hygroscopic white powder, and it is easily dispersed. Thanks to a higher solubility than standard ...voir plus NOVINOX PAT30 is a corrosion inhibiting pigment that allows the formulation of paints without the label toxic for the environment. It is a stable and non-hygroscopic white powder, and it is easily dispersed. Thanks to a higher solubility than standard Zinc Phosphate, NOVINOX PAT30 will be more reactive in the initial stage of corrosion. NOVINOX PAT30 is compatible with solvent and water based resins. It shows the best performance in solvent borne Alkyd systems. voir moins | Request Sample |
| Neboplast® SB 8750 | NECARBO B.V. | Neboplast® SB 8750 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake and whitening, is alkali and water resistant, and has pigment binding properties. Neboplast® SB 8750 finds use in the formulation...voir plus Neboplast® SB 8750 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake and whitening, is alkali and water resistant, and has pigment binding properties. Neboplast® SB 8750 finds use in the formulation of indoor and outdoor coatings from low to high PVC, and in sealants, adhesives, and roof coatings. voir moins | |
| FoamStar® PB 2724 | BASF Formulation Additives 巴斯夫配方助剂 | FoamStar® PB 2724 (formerly Dehydran® 240) is a defoamer with wetting properties for aqueous industrial paints and coatings. It is free from mineral oil and silicon oils. It can also be used as a defoamer in printing pastes (for textile printing) and in g...voir plus FoamStar® PB 2724 (formerly Dehydran® 240) is a defoamer with wetting properties for aqueous industrial paints and coatings. It is free from mineral oil and silicon oils. It can also be used as a defoamer in printing pastes (for textile printing) and in glues applied in printing plants. Furthermore, FoamStar® PB 2724 may also serve as an ingredient in the manufacture of anti-foaming agents for numerous fields of application. It is particularly effective in emulsion paints containing finely dispersed acrylic or polyvinyl acetate homopolymers or copolymers as binding agents. voir moins | |
| Aradur® 36 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 36 is an epoxy curing agent used with liquid epoxy resins such as Araldite® GY 776 or the emulsion PZ 33757/67. It is suitable for the formulation of water-based coatings for application to mineral and metallic substrates. This product is particul...voir plus Aradur® 36 is an epoxy curing agent used with liquid epoxy resins such as Araldite® GY 776 or the emulsion PZ 33757/67. It is suitable for the formulation of water-based coatings for application to mineral and metallic substrates. This product is particularly suitable for high UV resistant topcoat when combine with acrylic modified epoxy. It also suitable for epoxy cement concrete when combine with liquid epoxy emulsion. voir moins | |
| FoamStar® SI 2293 | BASF Formulation Additives 巴斯夫配方助剂 | FoamStar® SI 2293 (formerly Dehydran® 2293) is a defoamer and de-aerating agent for use in aqueous architectural paints and industrial coatings based on polymer emulsions which are applied by curtain coating, spraying, dipping, rolling or brushing on subs...voir plus FoamStar® SI 2293 (formerly Dehydran® 2293) is a defoamer and de-aerating agent for use in aqueous architectural paints and industrial coatings based on polymer emulsions which are applied by curtain coating, spraying, dipping, rolling or brushing on substrates such as wood, wood products or metal. This product has proved to be compatible with high-quality emulsion paints. Therefore, paints with FoamStar® SI 2293 maintain gloss. It is also suitable as a defoamer in emulsion and suspension polymerization, particularly in the manufacture of polyvinyl chloride, vinyl acetate and acrylic emulsions. FoamStar® SI 2293 is VOC-free according to 2002/42/EU and EPA 24 (US). It has low odor, does not stratify in storage and is free of mineral oils. Additionally, the product does not require labeling. voir moins | |
| RHEOLATE® HX 6050 | Elementis 海名斯特殊化学 | RHEOLATE® HX 6050 is an extremely efficient nonionic synthetic associative thickener (NISAT) and specially designed as a high-shear (ICI) builder for low and zero VOC aqueous paint and coatings. This rheology modifier is especially efficient in VAE, VINA VEOVA, and PVA latexes, and styrene acrylic. RHEOLATE® HX 6050 rheological additive contains very low VOC and can be used in emulsion paints and other waterborne...voir plus RHEOLATE® HX 6050 is an extremely efficient nonionic synthetic associative thickener (NISAT) and specially designed as a high-shear (ICI) builder for low and zero VOC aqueous paint and coatings. This rheology modifier is especially efficient in VAE, VINA VEOVA, and PVA latexes, and styrene acrylic. RHEOLATE® HX 6050 rheological additive contains very low VOC and can be used in emulsion paints and other waterborne systems including inks, textile coatings, adhesives and sealants. voir moins | Request Sample |
| Low VOC Water Reducible Alkyd Latex Primer (Formulation #AQ-210) | ICL Phosphate Specialty | Low VOC Water Reducible Medium Oil Alkyd Latex using HALOX® SZP-391 and HALOX® 570 Synergy | |
| Dextrol™ OC-180 | Ashland | Dextrol™ OC-180 is the neutralized (potassium salt) form of an ethoxylated aliphatic alcohol phosphate ester. It is designed to impart improved gloss and color acceptance in waterborne latex paints. | |
| Aquaflow™ NHS-350 | Ashland | Aquaflow™ NHS-350 is a solvent-free, non-ionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings and is compatible with most latex resin systems. | |
| Strodex™ PK-85NV Surfactant | Ashland | Strodex™ PK-85NV surfactant is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved substrate wetting, gloss, and color acceptance in waterborne latex paints. Depending on the formulation specifics, Strod...voir plus Strodex™ PK-85NV surfactant is the neutralized (potassium salt) form of a phosphate coester of aliphatic alcohols. It imparts improved substrate wetting, gloss, and color acceptance in waterborne latex paints. Depending on the formulation specifics, Strodex™ PK-85NV surfactant can also function as a supplemental dispersant to assist in reduction of pigment flocculation. This product does not contain any alkyl phenol ethoxylates (APEOs). voir moins | |
| Neboplast® MB 8861 | NECARBO B.V. | Neboplast® MB 8861 is an aqueous copolymer dispersion of acrylic esters. This alkylfenolethoxylate-free white liquid functions as a binder and features low viscosity, small particle size, and low MFFT. Neboplast® MB 8861 finds application as a base in the formulation...voir plus Neboplast® MB 8861 is an aqueous copolymer dispersion of acrylic esters. This alkylfenolethoxylate-free white liquid functions as a binder and features low viscosity, small particle size, and low MFFT. Neboplast® MB 8861 finds application as a base in the formulation of impregnates for porous substrates such as concrete, cement, and plasters. voir moins | |
| Neboplast® SB 8860 | NECARBO B.V. | Neboplast® SB 8860 is an aqueous copolymer dispersion of acrylic esters and styrene. This white liquid ha a small particle size, low MFFT, and is alkylfenolethoxylate free. Neboplast® SB 8860 has low viscosity and finds application as a base for the formulation...voir plus Neboplast® SB 8860 is an aqueous copolymer dispersion of acrylic esters and styrene. This white liquid ha a small particle size, low MFFT, and is alkylfenolethoxylate free. Neboplast® SB 8860 has low viscosity and finds application as a base for the formulation of impregnates for porous substrates such as concrete, cement, and plasters. voir moins | |
| EFKA® FA 4600 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in l...voir plus EFKA® FA 4600 is an antisettling agent for non-aqueous paints. As a modern anti-settling agent, it acts via adsorption phenomena on the pigment surface and effectively prevents pigments from settling and forming hard, difficult-to-stir sediments even in low-viscosity coatings such as, e.g., dipping paints and wash-primers. This is possible even in the presence of specific high density pigments based on lead, chrome, barium, iron and titanium. In addition, the uniform electrostatic charge imparted by EFKA® FA 4600 prevents re-agglomeration thereby counteracting any premature settling of the pigments. EFKA® FA 4600 is an easy to use liquid anti-settling agent, the particular advantage of which is that it is effective over a broad range of polarity. It can, therefore, be used in a nitrocellulose lacquer, the solvents of which are mainly polar, as well as in decorative paints which only contain white spirit, i.e., a non-polar solvent. EFKA® FA 4600 is also an excellent anti-settling agent for low-viscosity printing inks, e.g., flexographic and gravure. In particular it counteracts the tendency of inorganic pigments to settle. voir moins | |
| Nipacide SDT | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide SDT is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against algal and fungal spoilage in the dry state. Nipacide SDTis a Glycol based liquid. It is described chemically as unique carbendazim and diuron free formulation...voir plus Nipacide SDT is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against algal and fungal spoilage in the dry state. Nipacide SDTis a Glycol based liquid. It is described chemically as unique carbendazim and diuron free formulation of 2(thiocyanomethylthio)benzothiazole, 3-iodo-2-propynylbutylcarbamate and octyl isothiazolinone. Nipacide SDT is recommended for a wide range of applications including adhesives and paint where protection against fungi and algae is required in the dry state. voir moins | |
| Nubirox 102 | Ferro Pigments | Nubirox 102 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate with high performance and compatibility in solventborne and waterborne systems, suitable for glossy DTM (Direct To Metal) applications. | |
| EFKA® FA 4601 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regardi...voir plus EFKA® FA 4601 is an anti-settling agent for non-aqueous paint systems. It has been used with great success for years in the paint industry as a special agent for preventing sedimentation. EFKA® FA 4601 was developed as a result of detailed studies regarding interfacial activity. The mode of action of EFKA® FA 4601 systems results from the high surface activity of its constituents with almost all pigments. If processed properly, the individual pigment particles are coated with a monomolecular layer of adsorbed compounds which prevent agglomeration into larger particles, with the result that the fine particles remain in suspension and no caking occurs. This viscous liquid is a blend of selected fatty alcohol sulfates. EFKA® FA 4601 does not contain any alkali ions, and it is effective in most paints, provided they are not distinctly polar in their composition. voir moins | |
| Bayhydrol® A 2546 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2546 is a binder used in the formulation of water-reducible, two-component polyurethane coatings and sealers for mineral substrates and reactive resins (EP,PUR), with anionic polyacrylate dispersion. This product has a non-volatile content (1...voir plus Bayhydrol® A 2546 is a binder used in the formulation of water-reducible, two-component polyurethane coatings and sealers for mineral substrates and reactive resins (EP,PUR), with anionic polyacrylate dispersion. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 38-42, a viscosity at 23°C, D=approx.45s-1 of max. 200, and a pH (1:3 in demineralised water) value of 7-9. On account of its outstanding mechanical and chemical resistance, the product is particularly suitable for the formulation of sealers for mineral substrates and reactive resins (EP, PUR), in particular when good hot tire resistance is required. The product can also be combined with other water-reducible binders. On account of the many potential co-reactants, compatibility testing should always be carried out. voir moins | |
| HALOX® 550 WF | ICL Phosphate Specialty | HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethane...voir plus HALOX® 550 WF by ICL is a water-free, sol-gel-based corrosion inhibitor and adhesion promoter. It is designed for corrosion protection in thin film coatings. It is recommended for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, and acrylic emulsions. It is recommended for polyurethanes, epoxies, epoxy esters, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. It is suitable for low pH and acid-catalyzed systems. The dosage level is 0.5-3.0% based on the total formula weight. HALOX® 550 WF has a shelf life of 12 months. voir moins | Request Sample |
| Acronal® NX 3587 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® NX 3587 is an aqueous acrylic dispersion for flexible roof coating. It is a newly developed polymer from BASF to address many concerns in the Flexible Roof Coating industry. First, it is a pure acrylic polymer which contains crosslinking functionalities which not only improve polymer tensile properties, but improve substrate adhesion properties especially on polyurethane. Second, is that Acronal® NX 3587 was developed to address asphalt bleed resistance when applied as a white coating over an asphaltic substrate. It shows virtually no asphalt bleed-through when tested under both UV and Heat (50°C) conditions. Lastly, when this product is compounded into a typical 42 pvc Flexible Roof Coating formulation...voir plus Acronal® NX 3587 is an aqueous acrylic dispersion for flexible roof coating. It is a newly developed polymer from BASF to address many concerns in the Flexible Roof Coating industry. First, it is a pure acrylic polymer which contains crosslinking functionalities which not only improve polymer tensile properties, but improve substrate adhesion properties especially on polyurethane. Second, is that Acronal® NX 3587 was developed to address asphalt bleed resistance when applied as a white coating over an asphaltic substrate. It shows virtually no asphalt bleed-through when tested under both UV and Heat (50°C) conditions. Lastly, when this product is compounded into a typical 42 pvc Flexible Roof Coating formulation, it shows very low water absorbance values. voir moins | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation...voir plus DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation...voir plus DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| UCECOAT® 7200 | Allnex | UCECOAT® 7200 is a waterborne urethane acrylate for hardcoat applications. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV r...voir plus UCECOAT® 7200 is a waterborne urethane acrylate for hardcoat applications. Due to its low viscosity, it can be used as the main binder in waterborne hardcoat formulations for spray or curtain coater. UCECOAT® 7200 can be blended with other waterborne UV resins (after pH neutralization) to increase solid content and/or hardness property. voir moins | Request Sample |
| HEUCOPHOS® SRPP In Epoxy Dispersion (Formulation #00188) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SRPP In Epoxy Dispersion (Formulation #00188) is a formulation for a solvent based epoxy dispersion in combination with Heubach formulation No. 00188. | |
| Neboplast® MB 6060 | NECARBO B.V. | Neboplast® MB 6060 is an aqueous copolymer dispersion of acrylic esters. This white liquid has low MFFT, is tack free with a transparent film, is alkali, water, and yellowing resistant, and has a fine particle size. Neboplast® MB 6060 has blocking and resistance and high gloss, and finds application in solvent-free interior and exterior coatings, and in the formulation...voir plus Neboplast® MB 6060 is an aqueous copolymer dispersion of acrylic esters. This white liquid has low MFFT, is tack free with a transparent film, is alkali, water, and yellowing resistant, and has a fine particle size. Neboplast® MB 6060 has blocking and resistance and high gloss, and finds application in solvent-free interior and exterior coatings, and in the formulation of decorative wood coatings and stains. voir moins | |
| FOAMASTER® MO NXZ NC | BASF Formulation Additives 巴斯夫配方助剂 | FOAMASTER® MO NXZ NC is a liquid defoamer for emulsion paints and adhesive systems. It is based on styrene-butadiene, acrylic, polyvinyl chloride and its copolymers, ethylene vinyl acetate, vinylidene chloride and water-soluble alkyds. It has improved dis...voir plus FOAMASTER® MO NXZ NC is a liquid defoamer for emulsion paints and adhesive systems. It is based on styrene-butadiene, acrylic, polyvinyl chloride and its copolymers, ethylene vinyl acetate, vinylidene chloride and water-soluble alkyds. It has improved dispersability over Foamaster® MO NDW NC. voir moins | |
| Nipacide V1 | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Nipacide V1 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against algal and fungal spoilage in the dry state. Nipacide V1 is a Glycol based liquid. It is described chemically as unique carbendazim and diuron free formulation...voir plus Nipacide V1 is a low toxicity biocide specifically developed for the complete microbiological protection of water based products against algal and fungal spoilage in the dry state. Nipacide V1 is a Glycol based liquid. It is described chemically as unique carbendazim and diuron free formulation of 2(thiocyanomethylthio)benzothiazole, N-cyclopropyl-N-(1,1 -dimethylethylene)-6-methylthio-1,3,5-triazin-2,3-diamine and octyl isothiazolinone. Nipacide V1 is recommended for a wide range of applications including adhesives and paint where protection against fungi and algae is required in the dry state. voir moins | |
| FOAMASTER® MO NDW NC | BASF Formulation Additives 巴斯夫配方助剂 | FOAMASTER® MO NDW NC is a defoamer for systems based on synthetic latex, especially those based on styrene-butadiene, polyvinyl acetate, acrylic and water-soluble alkyds. It is effective in all systems based on synthetic latex, and it continues to defoam ...voir plus FOAMASTER® MO NDW NC is a defoamer for systems based on synthetic latex, especially those based on styrene-butadiene, polyvinyl acetate, acrylic and water-soluble alkyds. It is effective in all systems based on synthetic latex, and it continues to defoam effectively, even after months of storage. FOAMASTER® MO NDW NC contributes to excellent brushability and does not cause fish-eyes. It has no effect on the final paint film. voir moins | |
| HEUCOPHOS® ZPO In Epoxy Emulsion (EMS-Chemie AG Formulation) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZPO In Epoxy Emulsion (EMS-Chemie AG Formulation) is a formulation for a solvent based epoxy emulsion in combination with EMS-Chemie AG formulation. | |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...voir plus BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. voir moins | Request Sample |
| Easaqua™ X D 870 | Vencorex | Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings....voir plus Easaqua™ X D 870 is a ready to use product, easily dispersed in aqueous formulation. This product is ideal for onsite application : Parquet repair and concrete flooring an also recommended for a variety of industrial applications; wood and metal coatings. Easaqua™ X D 870 is a unique combination of Easaqua™ Technology and HDI/IPDI derivatives suitable to comply with European VOC emissions regulations. voir moins | |
| Rheovis® AS 1130 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Rheovis® AS 1130 is a white liquid acrylic copolymer emulsions in water. The polymer provides the rheological control effect through extensive swelling of the high molecular weight polymer in alkali, in the presence of water. Rheovis® AS 1130 is a derivative of a family of highly effective rheology control thickeners for a wide range of water-based coatings. Using it allows formulation of coatings with an advantageous thixotropic behavior giving non-stringy formulations which are easy to apply over a wide range of speeds and/or processes. Such formulation...voir plus Rheovis® AS 1130 is a white liquid acrylic copolymer emulsions in water. The polymer provides the rheological control effect through extensive swelling of the high molecular weight polymer in alkali, in the presence of water. Rheovis® AS 1130 is a derivative of a family of highly effective rheology control thickeners for a wide range of water-based coatings. Using it allows formulation of coatings with an advantageous thixotropic behavior giving non-stringy formulations which are easy to apply over a wide range of speeds and/or processes. Such formulations are ideally suitable for airless spray applications. voir moins | |
| Doublecure® 3959 | Double Bond Chemical Ind., Co., Ltd. 双键化工股份有限公司 | Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white powder is especially suited to applications where a low odor is desired, and for use in water-borne systems based on acrylate or unsaturated polyester resins. It is mainly used in UV curable formulation...voir plus Doublecure® 3959 is a highly efficient non-yellowing radical photoinitiator for the UV curing systems comprising of unsaturated monomers and prepolymers. The active hydroxy group can be reacted with suitable functionalized unsaturated resins. This white powder is especially suited to applications where a low odor is desired, and for use in water-borne systems based on acrylate or unsaturated polyester resins. It is mainly used in UV curable formulation on substrates of wood, metal, plastic and paper. voir moins | |
| Borchi® Gen 12 | OMG Borchers GmbH | Borchi® Gen 12 is a non-ionic, solvent-free wetting and dispersing agent for aqueous and solventborne pigment pastes, emulsion paints and lacquers. The active ingredient is based on renewable raw materials and is completely free of VOCs and APEOs. This product improves pigment wetting and shortens the dispersing process. In mixed pigmented systems, the additive effectively prevents a reflocculation of the pigments and thus stabilizes the consistency, color strength and shade of the finished coating and paste formulation...voir plus Borchi® Gen 12 is a non-ionic, solvent-free wetting and dispersing agent for aqueous and solventborne pigment pastes, emulsion paints and lacquers. The active ingredient is based on renewable raw materials and is completely free of VOCs and APEOs. This product improves pigment wetting and shortens the dispersing process. In mixed pigmented systems, the additive effectively prevents a reflocculation of the pigments and thus stabilizes the consistency, color strength and shade of the finished coating and paste formulation. voir moins | |
| Neboplast® MB 8565 | NECARBO B.V. | Neboplast® MB 8565 is an aqueous dispersion of an acrylic ester copolymer. This white liquid is APE free, is compatible with filers, pigments, thickeners, and other commonly used additives, and is suitable for solvent free formulations. Neboplast® MB 8565...voir plus Neboplast® MB 8565 is an aqueous dispersion of an acrylic ester copolymer. This white liquid is APE free, is compatible with filers, pigments, thickeners, and other commonly used additives, and is suitable for solvent free formulations. Neboplast® MB 8565 is a wall paint binder that meets stringent health, safety, and environmental requirements, finding application in the formulation of high quality indoor and outdoor paints. voir moins | |
| ETERNABRITE® 651-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation...voir plus ETERNABRITE® 651-PA is a bright aluminum pigment paste with a small, corn-flake particle size. This product is designed to provide good coverage and metallic effects in liquid flexographic and gravure ink systems. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® 651-PA is leafing and 70% non-volatile by weight. voir moins | |
| ETERNABRITE® Premier 351-PA | Silberline Manufacturing Co., Inc. | ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation...voir plus ETERNABRITE® Premier 351-PA is a bright aluminum pigment paste with a coarse particle size. This product is designed to provide strong metallic effects in solvent, liquid flexographic and gravure inks. It is not recommended for use in aqueous inks unless an evaluation of stability in the final ink formulation produces desired results. ETERNABRITE® Premier 351-PA is leafing and 77% non-volatile by weight. voir moins | |
| BECKOCURE™ EH 2100w/44WA | Allnex | BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epox...voir plus BECKOCURE™ EH 2100w/44WA is an amine-hardener dispersion, particularly suitable for the formulation of waterborne 2K-epoxy coatings for concrete and metal, free of volatile amines and solvents. In combination with epoxy dispersions or suitable liquid epoxy resins, fast drying coatings with an excellent performance can be obtained. The product is easy to handle and to apply, even without the use of additional organic solvents. voir moins | Request Sample |
| TEGO® VariPlus DS 50 | Evonik Operations GmbH, BL Coating Additives | TEGO® VariPlus DS 50 is a anionic dispersion of a polyurethane polyol resin for waterborne coatings and pigment concentrates delivered in liquid form. Particularly for waterborne formulations, this product can be applied for pigment concentrates, industri...voir plus TEGO® VariPlus DS 50 is a anionic dispersion of a polyurethane polyol resin for waterborne coatings and pigment concentrates delivered in liquid form. Particularly for waterborne formulations, this product can be applied for pigment concentrates, industrial coatings, wood and furniture coatings, architectural coatings, and leather coatings. TEGO® VariPlus DS 50 improves pigment wetting and stabilization as well as the hardness, gloss, and blocking resistance. It also improves the adhesion on many plastics such as PC, ABS, PS, PA, PMMA, PVC, Noryl. voir moins | Request Sample |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation...voir plus DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation...voir plus DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation...voir plus DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation...voir plus DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation...voir plus DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation...voir plus DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation...voir plus DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| Aquaflow™ NMS-460E | Ashland | Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of S...voir plus Aquaflow™ NMS-460E rheology modifier is a solvent-free, nonionic synthetic associative thickener (NSAT) designed for waterborne paints and coatings. It is efficient in most latex systems and across all seen levels. It is designed to provide a balance of Stormer (KU) viscosity along with high-shear (ICI) viscosity, and thus can be considered a mid-shear effective thickener that can function as the sole thickener in many paint formulation based on hydrophobic resins, such as acrylics and styrene acrylics. With more hydrophilic resins, such as vinyl acetate ethylene (VAE), optimized rheology may be achieved with Aquaflow™ NMS-460E rheology modifier alone or in combination with a supplemental KU driver. voir moins | |
| Bayhydrol® A 2601 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings...voir plus Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings. It can also be used in combination with suitable melamine resins for the formulation of one-component coatings. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile content (1g / 1ml toluene / 1h / 125°C) of 44-47, and a pH (1:4 in demineralised water) value of 7-8. This product can be used primarily in combination with Bayhydur® 304, XP 2487/1 and Desmodur® N 3900 for air- and oven-drying industrial coatings. The cured coating film is hard, tough but flexible and exhibits high gloss, good filling power, good weather and light stability, good resistance to solvents and gasoline and rapid drying. It is not recommended for clearcoat applications for wood. voir moins | |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation...voir plus HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. voir moins | Request Sample |
| Coapur™ XS 12 | Arkema Rheology & Specialty Additives | Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheo...voir plus Coapur™ XS 12 is a solvent and Alkyl Phenol Ethoxylate (APE) free associative polyurethane thickener designed for water-based formulations. Coapur™ XS 12 can be used sole or in combination either with other polyurethane thickeners or with any type of rheology modifiers such as acrylic or cellulosic thickeners, acting at low shear rates. Coapur™ XS 12 is a pure associative thickener. voir moins | Request Sample |
| Dispersogen® LFS | Clariant - Coatings & Construction Chemicals 科莱恩-涂料和建筑用化学品 | Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an an...voir plus Dispersogen® LFS is an anionic dispersing agent for pigments and minerals. This brownish, viscous liquid is free of any additional biocide, and it is composed of Polyarylalkylphenol polyethylene glycol ether phophoric acid ester. Dispersogen® LFS is an anionic AP-free dispersing agent and used for water-based, solvent-based or water / solvent based pigment preparations. It is suitable for inorganic pigments, carbon black and for organic pigments. The advantages of Dispersogen® LFH are: high pigment concentration, low viscosity of the preparation, high stability of the preparation in a wide temperature range and low foaming. voir moins | |
| BYK®-378 | BYK 毕克 | BYK®-378 is a polyether modified dimethylpolysiloxane. This product causes strong increase in slip and a medium to high reduction in surface tension combined with low foam stabilization. BYK-378 improves substrate wetting and prevents cratering. BYK-378 is a highly effective polyether modified poly-dimethyl-siloxane and typically does not adversely affect coating transparency and gloss. BYK-378 displays excellent compatibility and can be used in solvent-borne, solvent-free and aqueous coatings systems. However, due to formulation...voir plus BYK®-378 is a polyether modified dimethylpolysiloxane. This product causes strong increase in slip and a medium to high reduction in surface tension combined with low foam stabilization. BYK-378 improves substrate wetting and prevents cratering. BYK-378 is a highly effective polyether modified poly-dimethyl-siloxane and typically does not adversely affect coating transparency and gloss. BYK-378 displays excellent compatibility and can be used in solvent-borne, solvent-free and aqueous coatings systems. However, due to formulation viabilities, testing prior to production is recommended in all applications. voir moins | |
| Impranil® DLN W 50 | Covestro (formerly Bayer MaterialScience) 科思创 | Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage....voir plus Impranil® DLN W 50 is an anionic aliphatic polyester-polyurethane dispersion suitable for the formulation of textile coatings for use in numerous applications. It is ideally used for outerwear, shoe lining materials, fashion shoe uppers, and bags/luggage. With a white low-viscosity dispersion in water and a solids content of approx. 50%, Impranil® DLN W 50 is suitable for the formulation of textile coatings for use in numerous applications. It has a high solids content, good lightfast, is suitable for mechanical foaming, and high flexibility. Impranil® DLN W 50 has a density at 23°C of 1.1g/cm^3, a pH value of 6.5 ± 1, a flow time at 23°C (4mm DIN cup) of ≤ 70s, and a non-volatile content (0.9-1.1g / 1h / 125°C) of 50 ± 1%. voir moins | |
| Acronal® Xpress 7512 ap | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Acronal® Xpress 7512 ap is an aqueous acrylic dispersion for the formulation of ultra fast-curing mastic waterproofing membranes. It is “THE industry benchmark” in fast curing technology for 1K mastic waterproofing membranes. It was specifically designed ...voir plus Acronal® Xpress 7512 ap is an aqueous acrylic dispersion for the formulation of ultra fast-curing mastic waterproofing membranes. It is “THE industry benchmark” in fast curing technology for 1K mastic waterproofing membranes. It was specifically designed to allow for fast re-coats under highly humid climate conditions. BASF’s latest polymer for waterproofing makes use of multiple innovative surface features and a unique composition of ingredients, resulting in low water absorption, excellent blistering resistance, and a high pigment binder capability. voir moins | |
| Additive TI | OMG Borchers GmbH | Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI ...voir plus Additive TI is a reactive monofunctional isocyanate of low viscosity which reacts with water generating an inert amide. It eliminates slight parts of humidity and prevents moisture related problems in the formulation of polyurethane coatings. Additive TI is used for dehydration of solvents, fillers, pigments and bituminous tars. It rapidly reacts with water and generates carbon dioxide and toluenesulfonamide which is generally inert towards further reaction with alkyl and aryl isocyanates, and is usually soluble in common coating solvents. This product does not cause further film yellowing. Application of Additive TI in a polyurethane coating formulation, prevents moisture-related problems such as gloss reduction, haze, yellowing and reaction foam. It can also react with other active hydrogen compounds, such as alcohols, phenols, amines, amides and so on. This product eliminates moisture introduced with solvents, pigments, and fillers in 1-component as well as in classical 2-component PU systems. voir moins | |
| WorléeDex 1177 | Worlée-Chemie G.m.b.H. | WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient ...voir plus WorléeDex 1177 is a styrene-copolymer dispersion based on renewable raw materials. It has been developed for the formulation of aqueous printing inks and overprint varnishes. The right choice of raw materials gives the produced printing inks a sufficient water resistance and resolubility during the printing process and after the stop of the roller. Due to its good compatibility with many resins and pigments W´Dex 1177 is also suitable as a combination partner for acrylic resins. W´Dex 1177 is especially environmental friendly because of its renewable raw materials and it is free of amines/ammonia and ethylene glycol. voir moins | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation...voir plus DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. voir moins | |
| TEGO® Foamex 843 | Evonik Operations GmbH, BL Coating Additives | TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in...voir plus TEGO® Foamex 843 is a defoamer compound with fast foam knock-down. It is a clear to slightly hazy liquid formulation of polyethersiloxanes and organic polymers which contains fumed silica. It has strong defoaming characteristics with good foam collapse in pigmented low-viscosity systems. It is also suitable for pigmented and waterborne systems. TEGO® Foamex 843 is highly suitable for flexo/gravure printing. It is also suitable for airless spraying and for dip, flow, and curtain coating. voir moins | Request Sample |
| Coapur™ 4820 | Arkema Rheology & Specialty Additives | Coapur™ 4820 is a solvent and Alkyl Phenol Ethoxylate (APE) free polyurethane thickener designed for all types of water based formulations, especially the solvent free formulations. Coapur™ 4820 can be used sole or in combination either with other polyure...voir plus Coapur™ 4820 is a solvent and Alkyl Phenol Ethoxylate (APE) free polyurethane thickener designed for all types of water based formulations, especially the solvent free formulations. Coapur™ 4820 can be used sole or in combination either with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. Coapur™ 4820 provides excellent coating properties due to its high associative effectiveness with every kind of binder. Coapur™ 4820 increases specifically the viscosities at medium and high shear rates in order to improve tool load, film build, levelling and brush drag. Thanks to its exclusive rheological features, Coapur™ 4820 also prevents from settling and sagging tendency in low PVC formulations. voir moins | Request Sample |
| Easaqua™ M 502 | Vencorex | Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane co...voir plus Easaqua™ M 502 is a water dispersible aliphatic polyisocyanate. It does not contain any alkylphenolethoxylate. It is the APEO free version of Easaqua™ WT 2102. This product is suggested as a hardener of two-pack waterborne high-performance polyurethane coatings on various substrates, like metal, plastics, wood, and concrete. Easaqua™ M 502 is also suggested as a crosslinker of paint and varnish formulations with very low VOC. voir moins | |
| Coapur™ XS 83 | Arkema Rheology & Specialty Additives | Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resist...voir plus Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resistance, sprayability and good compromise in terms of flow and leveling. voir moins | Request Sample |
| CLAWB | PCI Group, Inc. | CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. W...voir plus CLAWB is a clear, colorless liquid comprised of and epoxy functional silane which serves as a crosslinker and adhesion promoter. It is intended for formulations containing acrylic latexes and polyurethane dispersions with carboxy or amino functionality. Waterborne coating formulations using CLAWB show improved solvent, impact and mar resistance, superior wet and dry adhesion, gloss retention upon aging and improved stain resistance in wood coatings. voir moins | |
| Dispex® Ultra PA 4580 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra PA 4580 (formerly Efka® 4580) is a high-molecular-weight dispersing agent. It stabilizes the pigment dispersion of inorganic and organic pigments and improves viscosity reduction of pigment paste, pigment loading, gloss, color strength, floc...voir plus Dispex® Ultra PA 4580 (formerly Efka® 4580) is a high-molecular-weight dispersing agent. It stabilizes the pigment dispersion of inorganic and organic pigments and improves viscosity reduction of pigment paste, pigment loading, gloss, color strength, flocculation stability and anit-flooding behavior. Dispex® Ultra PA 4580 is a modified polyacrylate polymer used as a dispersant for resin-free pigment concentrates (RFPC) and/or resin-minimal pigment concentrates (RMPC) in both water and solvents. These universal concentrates can be used for water- or solvent-based applications such as high-end industrial and automotive coatings. voir moins | |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alk...voir plus HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. voir moins | Request Sample |
| TM MC Powder Red 186C | New Prismatic Enterprise | TM MC Powder Red 186C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an...voir plus TM MC Powder Red 186C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from red to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Red 186C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Brown 497C | New Prismatic Enterprise | TM MC Powder Brown 497C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with ...voir plus TM MC Powder Brown 497C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from brown to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Brown 497C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Vermilion 185C | New Prismatic Enterprise | TM MC Powder Vermilion 185C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers w...voir plus TM MC Powder Vermilion 185C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from vermilion to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Vermilion 185C is suitable for aqueous based screen printing, paint, and ink. voir moins | |
| TM MC Powder Orange 021C | New Prismatic Enterprise | TM MC Powder Orange 021C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with...voir plus TM MC Powder Orange 021C is a thermochromic, microcapsulated, compound formulation, containing less than or equal to 3% moisture with an average particle size of 3-10µm. Its main components are leuco-dye, color developers, and temperature controllers with an activation temperature between -15°C and 70°C, allowing the product to change from orange to colorless when the temperature is raised and to return to color as the temperature cools down. With good solvent resistance and dispersal, TM MC Powder Orange 021C is suitable for aqueous based screen printing, paint, and ink. voir moins |
