| Bayhydrol® UH 2558 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mm...voir plus Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH (1:3 in demineralised water) value of 7-9. The product is characterized by high resistance to yellowing, very good wet film transparency and very good abrasion resistance (taber), where the films are hard but flexible. Post-curing of such coatings with Bayhydur®, for example, brings additional significant advantages and results in waterborne two-component coatings with significantly higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. Compatibility with affordable PAC dispersions is good but must be tested on a case-by-case basis. voir moins | |
| FOAMSTAR® SI 2210 NC | BASF Formulation Additives 巴斯夫配方助剂 | FOAMSTAR® SI 2210 NC is a defoamer for non-pigmented and low-pigmented aqueous coatings, printing inks, adhesives and UV-curable systems. It has a spontaneous defoaming effect in low- and nonpigmented aqueous coatings. It is highly compatible, does not se...voir plus FOAMSTAR® SI 2210 NC is a defoamer for non-pigmented and low-pigmented aqueous coatings, printing inks, adhesives and UV-curable systems. It has a spontaneous defoaming effect in low- and nonpigmented aqueous coatings. It is highly compatible, does not separate out from the paint and has a good long-term efficiency. Aqueous wood coatings and overprint varnishes based on acrylic polymers are the preferential fields of application, but the defoamer is also suitable for contact adhesives. voir moins | |
| DISPEX® Ultra PX 4585 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low...voir plus DISPEX® Ultra PX 4585 is a waterborne dispersant of the acrylate block copolymer family of products made by controlled free radical polymerization (CFRP). This technology allows formulating polymeric dispersants with defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4585 is especially suited for the dispersion of pigments in water-based coatings. DISPEX® Ultra PX 4585 offers high efficiency in stabilizing pigments and demonstrates wide compatibility with many water-based resin systems. This makes DISPEX® Ultra PX 4585 ideally suited for the use of the concept of resin-free pigment concentrates (RFPC). voir moins | |
| Interior/Exterior Semi Glossy Paint Waterborne Coatings (Formulation #21-10005) | Patcham LTD | Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing ...voir plus Gradually add Cellulosic Thickener in water and mix at 2.5 ms-1 for 10 minutes. Neutralize to maintain pH 8.5-9. Mix again for 10 minutes at 2.5 ms-1 . Add the raw materials in sequence. Slowly add the pigments and fillers mix thoroughly, continue mixing for 10 minutes at 2 ms-1. Grind at 4 ms-1 until desired Hegman gauge is achieved. -7 NS/ min. of 15 μm. voir moins | |
| DISPEX® Ultra PX 4575 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne...voir plus DISPEX® Ultra PX 4575 is a water-based dispersant made by Controlled Free Radical Polymerization (CFRP). This technology allows the synthesis of polymeric dispersants with highly defined polymer architecture and a low poly-dispersity index. DISPEX® Ultra PX 4575 is especially suited for the dispersion of pigments in waterborne coatings and colorants. voir moins | |
| Dispex® Ultra PA 4590 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra PA 4590 (formerly Efka® 4590) is a high molecular weight polymeric dispersant for water-based coatings. It is designed as a cost effective alternative to the existing polymeric dispersants, suitable for all kind of pigments in water-based in...voir plus Dispex® Ultra PA 4590 (formerly Efka® 4590) is a high molecular weight polymeric dispersant for water-based coatings. It is designed as a cost effective alternative to the existing polymeric dispersants, suitable for all kind of pigments in water-based industrial coatings as well as for pigment concentrates. voir moins | |
| Bayhydrol® U XP 2750 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a...voir plus Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 3.6. Bayhydrol® U XP 2750 is a hydroxyfunctional polycarbonate ester-polyurethane dispersion which can be thinned with water to application viscosity. It is a two-component polyurethane hydrocoatings based on Bayhydrol® U XP 2750 are characterized by high weathering resistance (gloss-retention, resistance to cracking), good appearance (high gloss, low haze value) and very high reflow-behavior after dry-or weet-scratching. voir moins | |
| Furniture coat/base/intermediate, water-based, fast drying, good sandable, blocking, chemical and water resistant(Formulation #I13401_1a) | Hoffmann Mineral 霍夫曼矿物 | This formulation utilizes SILLITIN Z 89. | |
| EFKA® PX 4701 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® PX 4701 is a 100 % active dispersant of the acrylic block co-polymer family made by Controlled Free Radical Polymerization. It is well suitable for UV- curable, solvent- and water-based ink formulations. It is especially recommended for high-perform...voir plus EFKA® PX 4701 is a 100 % active dispersant of the acrylic block co-polymer family made by Controlled Free Radical Polymerization. It is well suitable for UV- curable, solvent- and water-based ink formulations. It is especially recommended for high-performance systems such as inkjet inks, UV- curable and water-based flexographic inks. voir moins | |
| Rust-Converting Red Primer (Formulation #WBACRY158R1) | ASCOTEC | Red Waterborne Styrene Acrylic Rust Converting Primer based on Neocryl® XK87, ASCONIUM® 143, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| Bayhydrol® UH 2593/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) ...voir plus Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH (1:2.5in demineralised water) of 7-9. The product was developed specifically for the formulation of one- and two-component wood coating systems. It is characterized by very good wet film transparency, high hardness and good black heel mark resistance. Post-curing of such coatings with Bayhydur® 305 or Bayhydur® 3100, for example, brings additional significant advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener solution is generally 10:1. The product is also suitable for use in a wide range of applications thanks to the combination of good application properties and good compatibility with cost-effective PAC dispersions. voir moins | |
| FOAMASTER® MO 2170 | BASF Formulation Additives 巴斯夫配方助剂 | FOAMASTER® MO 2170 provides efficient defoaming performance in the manufacture and application of paints and inks from synthetic latex. It is recommended for defoaming waterborne architectural coatings. It may also be suitable for defoaming aqueous printi...voir plus FOAMASTER® MO 2170 provides efficient defoaming performance in the manufacture and application of paints and inks from synthetic latex. It is recommended for defoaming waterborne architectural coatings. It may also be suitable for defoaming aqueous printing inks. voir moins | |
| High-Gloss WB White DTM (Formulation #WBACRY7358) | ASCOTEC | White High Gloss Waterborne Acrylic DTM Paint based on Pliotec® HDT16, ASCONIUM® 142DA and ASCOTRAN® H10. | |
| FOAMSTAR® ED 2526 | BASF Formulation Additives 巴斯夫配方助剂 | FOAMSTAR® ED 2526 is a defoamer in various water-based coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. FOAMSTAR® ED 2526 was de...voir plus FOAMSTAR® ED 2526 is a defoamer in various water-based coating systems. It functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. FOAMSTAR® ED 2526 was developed for water-based industrial coatings. It is recommended for use in coatings based on alkyd resin solutions and alkyd resin emulsions. voir moins | |
| GLOXIL WW SL | Hoffmann Mineral 霍夫曼矿物 | GLOXIL WW SL is an aqueous dispersion based on modified silica for use in matt water-based coatings improves incorporation, transparency and resistance. | |
| High-Gloss WB White DTM (Formulation #WBACRY7625) | ASCOTEC | White High Gloss Waterborne Styrene Acrylic DTM Paint based on Neocryl® XK85, ASCONIUM® 143 and ASCOTRAN® H10. | |
| Protective Rust-Converting Clear-Coating (Formulation #WBACRY700RF1) | ASCOTEC | Waterborne Acrylic Rust Converting Clear Coating based on Alberdingk® AC2403, ASCONIUM® 114, ASCOTRAN® H10 and ASCOTRUST® X1. | |
| Facade paint, water-based, white, matte (Formulation #FP 2019/1) | Hoffmann Mineral 霍夫曼矿物 | This formulation utilizes SILLITIN Z 89. | |
| Universal anti-corrosion primer, water-based, white (Formulation #RRS 2145) | Hoffmann Mineral 霍夫曼矿物 | This formulation utilizes SILLITIN Z 86. | |
| LIOPUR PFL 2366 | Synthopol Chemie Germany | LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are ta...voir plus LIOPUR PFL 2366 is an aqueous, aliphatic modified polyurethane dispersion based on a polyester. It is free of solvents, TEA, and surfactants. After air-drying, film coatings based on LIOPUR PFL 2366 and 5 % butylglycole form transparent films which are tack-free and display good surface resistance of appr. 120 sec Pendulum hardness after König (90 μm wet film after 24 h drying at room temperature). LIOPUR PFL 2366 is suitable as a sole binder in the formulation of solventpoor air-drying 1-pack parquet flooring and furniture varnishes owing to sufficient chemical resistance voir moins | |
| WB Rust-Converting Primer (Formulation #WBACRY799-115R4) | ASCOTEC | White Waterborne Acrylic Rust Converting DTM Coating based on Alberdingk® AC2403, ASCONIUM® 114, ASCOTRAN® H17 and ASCOTRUST® X4. | |
| HEUCOPHOS® SAPP In Silicone Powder (Formulation #604159) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SAPP In Silicone Powder (Formulation #604159) is a formulation for a water based silicone powder in combination with Heubach formulation No. 604159. | |
| HEUCOPHOS® SAPP In Silicone Powder (Formulation #604160) | Heubach/Heucotech, Ltd. | HEUCOPHOS® SAPP In Silicone Powder (Formulation #604160) is a formulation for a water based silicone powder in combination with Heubach formulation No. 604160. | |
| Foamaster® NO 2335 | BASF Formulation Additives 巴斯夫配方助剂 | Foamaster® NO 2335 (formerly Foamaster® 350) is a liquid defoamer on the basis of renewable raw materials for the manufacture of synthetic latex and for water-based architectural coatings, plasters based on organo silicate and aqueous adhesives. | |
| 2K Waterborne Floor Paint - Semi-Glossy Red (Formulation #148/024 - 025) | Incorez Ltd. | This formulation is for a red gloss floor paint that utilizes the product Amirez 148/024. | |
| 2K Waterborne Floor Paint - Semi-Glossy Red (Formulation #148/024 - 023) | Incorez Ltd. | This formulation is for a red gloss floor paint that utilizes the product Amirez 148/024. | |
| 2K Epoxy Primer Surfacer For Trains (Formulation #L00046.1) | Hoffmann Mineral 霍夫曼矿物 | 2K Epoxy Primer Surfacer For Trains is a water-based solid, epoxy resin, and hydrophobic amine. It features anti-corrosion and good sandability. | |
| HEUCOPHOS® ZAM-Plus In Polyester Powder (Formulation #03248) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZAM-Plus In Polyester Powder (Formulation #03248) is a formulation for a water based polyester powder in combination with Heubach formulation No. 03248. | |
| HEUCOPHOS® ZCP-Plus In Epoxy Powder (Formulation #03249) | Heubach/Heucotech, Ltd. | HEUCOPHOS® ZCP-Plus In Epoxy Powder (Formulation #03249) is a formulation for a water based epoxy powder in combination with Heubach formulation No. 03249. | |
| EFKA® SL 3236 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane...voir plus EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. voir moins | |
| Bayhydrol® UV XP 2775 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2775 is a solvent-free urethane acrylate dispersion, that is used for the formulation of waterborne UV clear or pigmented wood and plastic coatings, in particular for highly pigmented wood coatings. Especially usable for white pigmented c...voir plus Bayhydrol® UV XP 2775 is a solvent-free urethane acrylate dispersion, that is used for the formulation of waterborne UV clear or pigmented wood and plastic coatings, in particular for highly pigmented wood coatings. Especially usable for white pigmented coatings with high pigment content and resistance properties. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 39.0-42.0, a viscosity at 23°C of < 150, and a pH level of approx. 7.0-9.0. Bayhydrol® UV XP 2775 is used for the formulation of high quality waterborne UV coatings for furniture.Depending on the formulation and the method of application, it is possible to produce finished surfaces that conform to the resistance requirements of DIN 68861, 1B. Bayhydrol® UV XP 2775 is especially usable for white pigmented coatings with high pigment content and resistance properties. After evaporation of water, the coating is physically dry and tack-free. voir moins | |
| RHEOVIS® HS 1162 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® HS 1162 is an outstanding extreme low-shear to thixotropic thickener and rheology-control agent for aqueous coatings. | |
| Rheovis® PU 1331 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Rheovis® PU 1331 is a whitish liquid, heavy metal-, solvent- and VOC free solution of polyurethane in water. Heavy metal catalysts are not part of the product‘s formulation. This product is a highly- efficient environmental friendly associative polyuretha...voir plus Rheovis® PU 1331 is a whitish liquid, heavy metal-, solvent- and VOC free solution of polyurethane in water. Heavy metal catalysts are not part of the product‘s formulation. This product is a highly- efficient environmental friendly associative polyurethane thickener designed to give newtonian rheology profile and excellent balance of performance properties to flat, semigloss, and gloss coatings. voir moins | |
| Foamaster® MO 2150 | BASF Formulation Additives 巴斯夫配方助剂 | Foamaster® MO 2150 (formerly Foamaster® 50) is a liquid defoamer for the manufacture of synthetic latex and for water-based architectural coatings, plasters based on organo silicate and aqueous adhesives. This product is a blend of hydrophobic components ...voir plus Foamaster® MO 2150 (formerly Foamaster® 50) is a liquid defoamer for the manufacture of synthetic latex and for water-based architectural coatings, plasters based on organo silicate and aqueous adhesives. This product is a blend of hydrophobic components and paraffinic hydrocarbons defoamer based on mineral oil. voir moins | |
| Desmodur® XP 2565 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmodur® XP 2565 is a low-viscosity, aliphatic polyisocyanate resin based on isophorone diisocyanate. It is used as the hardener component for weather-stable coating systems. In combination with HDI hardeners, the product is suitable for the formulation ...voir plus Desmodur® XP 2565 is a low-viscosity, aliphatic polyisocyanate resin based on isophorone diisocyanate. It is used as the hardener component for weather-stable coating systems. In combination with HDI hardeners, the product is suitable for the formulation of high-solids and waterborne two-component polyurethane systems for automotive refinishing, transportation and industrial coating applications. This product has a monomeric IPDI (supply form) of < 0.5%, a hazen color value of ≤ 60, and a flash point of approx. 38.5°C. voir moins | |
| Foamaster® MO 2141 | BASF Formulation Additives 巴斯夫配方助剂 | Foamaster® MO 2141 (formerly Foamaster® NS 1) is a universal defoamer for aqueous emulsion-based coatings and plasters. It is specifically designed for flat aqueous paints and coatings. It has high compatibility and does not cause fish eyes. | |
| Anti-corrosion primer for sandblasted steel, water-based (Formulation #RRS 2176) | Hoffmann Mineral 霍夫曼矿物 | This formulation utilizes SILLITIN Z 89. | |
| Anticorrosion Primer (Formulation #EP 384) | ICL Phosphate Specialty | High Performance 2K Water-based Epoxy Primer with HALOX® SW-111 based on BECKOPOX EP 384 | |
| PAT-ADD AF 31 | Patcham LTD | PAT-ADD AF 31 is an easy dispersed defoamer for use in waterborne coatings, aqueous inks and pigment dispersions. PAT-ADD AF 31 is an oil-free defoamer based on an organically modified polysiloxane. Although specially developed for use in low pigmented pa...voir plus PAT-ADD AF 31 is an easy dispersed defoamer for use in waterborne coatings, aqueous inks and pigment dispersions. PAT-ADD AF 31 is an oil-free defoamer based on an organically modified polysiloxane. Although specially developed for use in low pigmented paints and varnishes, PAT-ADD AF 31 is versatile in application. It is a highly efficient defoamer and anti-foaming additive for waterborne during manufacturing and application. Main benefits are: easily dispersible, highly effective anti-foaming agent requiring low dosage, and clear liquid with excellent shelf stability. voir moins | Request Sample |
| Rheotech™ 117 | Arkema Rheology & Specialty Additives | Rheotech™ 117 is a liquid premium rheology modifier designed to provide maximum high-shear viscosity for improved film build. Rheotech™ 117 is used in interior and exterior waterborne coatings formulation. | Request Sample |
| Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...voir plus Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. voir moins | Request Sample |
| Clear coat for furniture, water-based, preferably as base and intermediate coat (Formulation #I 13401.1) | Hoffmann Mineral 霍夫曼矿物 | This formulation utilizes SILLITIN V 88 and SILLITIN Z 89. | |
| DOWSIL™ 108F Additive | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation...voir plus Dow Corning® 108F Additive is a versatile antifoam active on the reduction of foam generated during the manufacture and application of water based paints, coatings and inks. It works in major types of water based resins like acrylics, vinyl acetate/ethylene (VAE dispersions), polyurethane dispersions, and alkyd emulsions. This antifoam additive is particularly recommended for premium low PVC coatings, to provide a good density control of the coating formulation while maintaining a good appearance of the final surface. voir moins | |
| Bayhydrol® UV 2720/1 XP | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings for industrial coating of plastics and wood and other substrates, and is particularly suitable for pigmented systems. As a thermoformable product, it is an ideal solution for po...voir plus Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings for industrial coating of plastics and wood and other substrates, and is particularly suitable for pigmented systems. As a thermoformable product, it is an ideal solution for postformable coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 39-41, a flow time at 23°C, (4 mm cup) of 15-50, and a pH level of 7.0-9.0. Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings, in particular for applications that require good blocking resistance after water evaporation and before UV cure (wood, plastic, pigmented systems). The addition of 1.0 to 2.5 wt. photoinitiator relative to binder has proven effective for initiation. Viscosity is adjusted by the addition of polyurethane thickeners. As the dispersion has a relatively high surface tension, the formulation should always contain a wetting agent, such as BYK® 348 (BYK). Matting agents and additives can be dispersed directly into the formulation using a dissolver. voir moins | |
| ECOPUD-54 | Ecopol Tech | ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction ...voir plus ECOPUD-54 is an aqueous anionic dispersion of high molecular weight polyurethane, used as a raw material in the formulation of heat-activated adhesives for various applications, such as furniture, automotive, footwear, leather, cork, and the construction industry. Due to its polymeric structure, ECOPUD-54 is particularly well-suited for applications involving plasticized PVC substrates. voir moins | |
| Zero VOC Gray Metal Primer (Formulation #37-148) | ICL Phosphate Specialty | Water-based Epoxy Dispersion using HALOX® SZP-391 | |
| PAT-ADD DA 817 | Patcham LTD | PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particula...voir plus PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting agents, and prevents hard sedimentation in waterborne as well as solvent-borne primers. voir moins | Request Sample |
| Anquamine 401: Preliminary Primer (Formulation #3515) | ICL Phosphate Specialty | 2K Water-based Epoxy Primer with HALOX® SW-111 cured with Anquamine 401 | |
| Hydropalat® WE 3486 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3486 (formerly Hydropalat® 886) is a highly effective, concentrated wetting agent for water based coatings and printing inks. | |
| Bayhydrol® UH XP 2719 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of ap...voir plus Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of approx. 100, a minimum film-forming temperature of 21, and a density of 1,06. The product is characterized by fast drying and good blocking resistance. It can be used in both one-component and two-component formulations, and can also be combined with other anionic, hydrophilized dispersions, such as polyacrylate and polyurethane dispersions. voir moins | |
| Anticorrosive Primer and Topcoat (Formulation #1455) | ICL Phosphate Specialty | 2K Water-based Solid Epoxy Primer with HALOX® CW-491 and BASF® ALCOPHOR 827 Synergy | |
| Coapur™ 830 W | Arkema Rheology & Specialty Additives | Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or ...voir plus Coapur™ 830 W is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It can be used sole or in combination with other polyurethane thickeners or with other types of rheology modifiers such as acrylic or cellulosic thickeners. It increaseases specifically viscosities at medium and high shear rates in order to improve tool load, film build, leveling and brush drag. It is a 30% solids version of Coapur™ 817 W. voir moins | Request Sample |
| Bayhydur® XP 2451 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2451 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as the hardener component in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive r...voir plus Bayhydur® XP 2451 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as the hardener component in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU); also as an additive to enhance the property profile of waterborne coating systems. Due to its hydrophilic character, Bayhydur® XP 2451 can be easily emulsified in the aqueous phase. It is used mainly as the crosslinking agent for aqueous polyol binders (Bayhydrol®). Bayhydur® XP 2451 can also be added to conventional OH-free dispersions to improve their property profiles. voir moins | |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane...voir plus HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. voir moins | Request Sample |
| FOAMASTER® MO 2133 | BASF Formulation Additives 巴斯夫配方助剂 | FOAMASTER® MO 2133 is a 100% active defoamer developed to provide efficient and economical defoaming in water-based coatings. It utilizes four different defoaming mechanisms, including a multiple hydrophobic system which results in broad spectrum defoamin...voir plus FOAMASTER® MO 2133 is a 100% active defoamer developed to provide efficient and economical defoaming in water-based coatings. It utilizes four different defoaming mechanisms, including a multiple hydrophobic system which results in broad spectrum defoaming performance. voir moins | |
| Heat Resistant Stoving Enamel (Formulation #PKHW-34) | ICL Phosphate Specialty | Water-based, Heat-Resistant Phenoxy Stoving Enamel using HALOX® SZP-391 & HALOX® CW-491 | |
| Hydropalat® WE 3158 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3158 (formerly Hydropalat® 1580) is an aqueous solution of a mixture of non-ionic surfactants. | |
| Bayhydrol® U 241 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free o...voir plus Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free of approx. 2.5, a minimum film-forming temperature MFT of approx. 0, and a mean particle size of approx. 50. Bayhydrol® U 241 is a polyester-polyurethane dispersion neutralized with dimethyl ethanol amine which is resistant to hydrolysis. The product can be diluted with water for application and shows no dilution anomalies. Bayhydrol® U 241 can be combined with partially methylated melamine resins to formulate water-dilutable stoving coatings and primers which cure at approx. 120°C. voir moins | |
| HALOX® 520 | ICL Phosphate Specialty | HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation...voir plus HALOX® 520 by ICL is a liquid organic corrosion inhibitor and adhesion promoter. It can also be used as a metal pretreatment additive. It is designed for water-borne and solvent-based coatings systems. It is polymeric amine salt, approximately 60% active in ethanol. HALOX® 520 may be used in waterborne formulations such as 2-pack epoxy systems, 1 and 2-pack polyurethanes, acrylics (especially epoxy/amine functionalized), and hybrid systems. The dosage level of the grade is 0.5-1.5% based on total formulation solids. It has a shelf life of 36 months. voir moins | Request Sample |
| Rheovis® AS 1956 | BASF Formulation Additives 巴斯夫配方助剂 | Rheovis® AS 1956 (formerly Collacral® DS 6256) is a thickener for polymer dispersions and other aqueous systems, supplied in powder form. | |
| FoamStar® ED 2521 | BASF Formulation Additives 巴斯夫配方助剂 | FoamStar® ED 2521 (formerly Dehydran® SE 1) is a universal polymer emulsion defoamer. It is an excellent defoamer for all flat to semi-gloss aqueous coatings. The eco-friendly polymer technology makes FoamStar® ED 2521 VOC-free according to EU Directive 2...voir plus FoamStar® ED 2521 (formerly Dehydran® SE 1) is a universal polymer emulsion defoamer. It is an excellent defoamer for all flat to semi-gloss aqueous coatings. The eco-friendly polymer technology makes FoamStar® ED 2521 VOC-free according to EU Directive 2002/42/EC and EPA Method 24 (USA) and best in class with ultra-low semi-volatile organic compound content. FoamStar® ED 2521 is suitable for manufacturing of all kinds of water-based architectural paints. It is especially recommended for high-PVC systems based on styrene-acrylic, vinyl/VeoVa™ 1 and vinyl-acrylic emulsions. voir moins | |
| Hydropalat® WE 3485 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3485 (formerly Hydropalat® 885) is a wetting agent for aqueous paint systems. | |
| Foamaster® MO 2121 | BASF Formulation Additives 巴斯夫配方助剂 | Foamaster® MO 2121 (formerly Foamaster® DF 201) is indicated for the manufacture of all kind of water-based architectural paints. It is specially recommended for systems based on styrene-acrylic, vinylveovas and vinyl-acrylic emulsions. This product is an...voir plus Foamaster® MO 2121 (formerly Foamaster® DF 201) is indicated for the manufacture of all kind of water-based architectural paints. It is specially recommended for systems based on styrene-acrylic, vinylveovas and vinyl-acrylic emulsions. This product is an excellent defoamer for flat aqueous coatings. This product avoids foam formation during the grinding process and retains antifoam efficiency during long storage of the paint. voir moins | |
| BR 125 NPF | Arkema Rheology & Specialty Additives | BR 125 NPF is a polyurethane associative rheology modifier which gives formulations a unique Newtonian rheological profile characterised by a low viscosity at low shear rate and a high viscosity at high shear rate. The main applications for BR 125 NPF are...voir plus BR 125 NPF is a polyurethane associative rheology modifier which gives formulations a unique Newtonian rheological profile characterised by a low viscosity at low shear rate and a high viscosity at high shear rate. The main applications for BR 125 NPF are gloss emulsion paints, semi-gloss, flat dispersion paints. Formulation of anticorrosive paints or adhesives can also be based on BR 125 NPF. voir moins | Request Sample |
| Dispex® AA S 760 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® AA S 760 (formerly Hydropalat® 1706) is a derivative of a family of highly effective dispersing agents for water-based coating systems, especially suitable for the dispersion of inorganic pigments. | |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...voir plus HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. voir moins | Request Sample |
| Nubicoat HWR Universal, Resin Free Concentrate at 55% (Formulation #W5605) | Ferro Pigments | Pigment concentrate of ultramarine blue for solvent and water based paints. | |
| Nubifer R5530 Universal Resin Free Concentrate at 55% (Formulation #W6392) | Ferro Pigments | Pigment concentrate of ultramarine blue for solvent and water based paints. | |
| DISPEX® Ultra FA 4437 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to...voir plus DISPEX® Ultra FA 4437 is a silicone-free surface active flow additive and colour acceptance improver for aqueous systems based on emulsions and aqueous resins. Due to its good wetting properties DISPEX® Ultra FA 4437 ensures better wetting of difficult-to-wet substrates. The emulsifying effect of this product also prevents surface defects such as craters, fisheyes, pinholes and streaks caused by incompatible components. Furthermore, DISPEX® Ultra FA 4437 has a strong affinity to pigment surfaces thereby reducing color acceptance problems. voir moins | |
| Loxanol® CA 5308 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® CA 5308 (formerly Lusolvan® FBH) is a film-forming agent for aqueous polymer dispersions. | |
| Nubifer Y5028 Universal Resin Free Concentrate at 60% (Formulation #W5605) | Ferro Pigments | Pigment concentrate of Yellow Iron Oxide for solvent and water based paints. | |
| WorléeCryl® 7450 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7450 is an aqueous pure acrylic emulsion which shows a very high blocking resistance. This grade is supplied in the form of 45% in water. The recommended application is to use this binder for the formulation of parquet sealers and stains in co...voir plus WorléeCryl® 7450 is an aqueous pure acrylic emulsion which shows a very high blocking resistance. This grade is supplied in the form of 45% in water. The recommended application is to use this binder for the formulation of parquet sealers and stains in combination with PU emulsions. voir moins | |
| Foamaster® MO 2135 | BASF Formulation Additives 巴斯夫配方助剂 | Foamaster® MO 2135 (formerly Foamaster® 8034 E) is an emulsifiable, highly efficient liquid defoamer specifically designed for low viscosity non-pigmented systems and monomer stripping, aqueous inks. | |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | Request Sample |
| Bayhydrol® UH 2342 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2342 is a water-dispersible, anionic, fatty acid modified polyurethane dispersion that is useful as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g ...voir plus Bayhydrol® UH 2342 is a water-dispersible, anionic, fatty acid modified polyurethane dispersion that is useful as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D = approx. 100/s) of max. 100, and a pH (1:2.5 in demineralised water) level of 6.7-8.2. Due to the product's mechanical and chemical resistance properties, especially its black heel mark resistance, it is ideally suited for the formulation of parquet sealers. A combination with other water-reducible binders is possible because of the many potential combination products. voir moins | |
| Nubicoat HTS Waterbased Concentrate at 52% (Formulation #W6387) | Ferro Pigments | Pigment dispersion compatible with different systems. | |
| RHEOVIS® HS 1332 | BASF Formulation Additives 巴斯夫配方助剂 | RHEOVIS® HS 1332 is a an excellent rheology-control thickener of water based coatings to increase viscosity in the mid- to high-shear range. It is a hydrophobic modified acrylic swellable copolymer emulsion (HASE) in water. The polymer provides the rheolo...voir plus RHEOVIS® HS 1332 is a an excellent rheology-control thickener of water based coatings to increase viscosity in the mid- to high-shear range. It is a hydrophobic modified acrylic swellable copolymer emulsion (HASE) in water. The polymer provides the rheology-control effect through extensive swelling of the high-molecular-weight polymer in combination with a hydrophobic component in alkali, in the presence of water. voir moins | |
| EFKA® RM 1920 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films ...voir plus EFKA® RM 1920 is a particularly finely ground additive used to impart a thixotropic effect to paints, printing inks and other coatings. The incorporation of EFKA® RM 1920 ensures a strong thixotropic effect in non-aqueous coatings. Sagging of thick films on vertical surfaces is effectively prevented whilst the working and flow properties are also generally improved. Pigment settling is also substantially reduced. EFKA® RM 1920 can be used in most non-aqueous coatings both with and without solvents. The lower the polarity of the coating, the better is its performance. voir moins | |
| Dispex® Ultra PA 4516 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra PA 4516 (formerly Efka® 1016) is a dispersing resin that is a polymer of low average molecular weight with highly hydrophilic properties. It was developed to function as a pigment grinding resin for water- based inks. Further, it may be used...voir plus Dispex® Ultra PA 4516 (formerly Efka® 1016) is a dispersing resin that is a polymer of low average molecular weight with highly hydrophilic properties. It was developed to function as a pigment grinding resin for water- based inks. Further, it may be used as a modifier resin to improve machine stability (resolubility) of water based inks made on more hydrophobic resins. The product may also be used as a sole binder where high solids and very good resolubility are required. voir moins | |
| Dispex® Ultra FA 4483 | BASF Formulation Additives 巴斯夫配方助剂 | Dispex® Ultra FA 4483 (formerly Hydropalat® 7003) is a dispersing agent for inorganic pigments and stabilizing surfactant for latex production. It is a phosphoric acid ester based wetting and dispersing agent. The product is supplied as a 30 % aqueous sol...voir plus Dispex® Ultra FA 4483 (formerly Hydropalat® 7003) is a dispersing agent for inorganic pigments and stabilizing surfactant for latex production. It is a phosphoric acid ester based wetting and dispersing agent. The product is supplied as a 30 % aqueous solution in acidic form. voir moins | |
| Bayhydrol® A 2620 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2620 is a water-reducible, hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates for the formulation of high grade, fast drying, waterborne two-component clearcoats and top-coats, e.g. for automotive and ...voir plus Bayhydrol® A 2620 is a water-reducible, hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates for the formulation of high grade, fast drying, waterborne two-component clearcoats and top-coats, e.g. for automotive and industrial coating applications. This product has an acid number of approx. 9.8, a hydroxyl content (solvent free, calculated) of approx. 3.0, and a density at 20°C of approx. 1,07. Bayhydrol® A 2620 can be used in combination with aliphatic polyisocyanates for the formulation of high-gloss clearcoats and top-coats which can be dried at room temperature or force-dried, e.g. at 130°C. The cured paint films are hard but flexible, with good resistance to solvents, water and chemicals and also exhibit good UV stability. voir moins | |
| Hydropalat® WE 3188 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3188 (formerly Hydropalat® 188 A) is a highly concentrated versatile non-ionic dispersing agent for use in aqueous and organic system. | |
| Hydropalat® WE 3116 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3116 (formerly Hydropalat® 215) is a dispersant for aqueous coatings. It is especially suitable for solvent and binder free pigment pastes. | |
| Hydropalat® WE 3127 | BASF Formulation Additives 巴斯夫配方助剂 | Hydropalat® WE 3127 (formerly Hydropalat® PLS 127) is a biodegradable surfactant for pigment wetting and pigment dispersion in aqueous paints, inks and adhesives. | |
| Aradur® 3986 Epoxy Curing Agent | Huntsman Advanced Materials 亨斯迈先进材料 | Aradur® 3986 Epoxy Curing Agent is an amine hardener especially formulated for water-dilutable epoxy resin systems. This product is free of volatile amines and solvents. It was developed for the formulation of anticorrosive primers (i.e., using waterborne...voir plus Aradur® 3986 Epoxy Curing Agent is an amine hardener especially formulated for water-dilutable epoxy resin systems. This product is free of volatile amines and solvents. It was developed for the formulation of anticorrosive primers (i.e., using waterborne epoxy resins such as Araldite® PZ 3961-1 epoxy resin) and other water- based coatings. Aradur 3986 epoxy curing agent provides a visible end-of-use life (by viscosity increase) and the desired combination of fast, set-to-touch times, and long pot life with both modified and unmodified liquid epoxy resins, such as Araldite® GY 6010 epoxy resin or Araldite® GY 9615 epoxy resin. voir moins | |
| DISPEX® CX 4340 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in wa...voir plus DISPEX® CX 4340 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of a sodium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. voir moins | |
| DISPEX® CX 4240 | BASF Formulation Additives 巴斯夫配方助剂 | DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in...voir plus DISPEX® CX 4240 is a highly effective, low viscosity dispersing agent for water-borne coating systems. It is especially suited for the dispersion of inorganic pigments. This straw colored liquid is a solution of an ammonium salt of an acrylic copolymer in water. The copolymer is manufactured to a relatively narrow molecular weight distribution thus resulting in a consistent product quality with maximum effectiveness. The special copolymer backbone is designed for complete compatibility with polypropylene and hexylene glycols used in high proportions in water-borne high gloss coatings to promote wet edge time. voir moins | |
| TEGO® Phobe 6510 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 6510 is a formulation of a polysiloxane resin / silane-blend for waterborne impregnations and primers. | Request Sample |
| LIOCRYL AM 920 | Synthopol Chemie Germany | LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints...voir plus LIOCRYL AM 920 is an aqueous, self-crosslinking pure acrylic emulsion with free hydroxyl groups and fine particle size. It is solvent- and plasticizer-free. The emulsion is particularly suitable for the formulation of aqueous 1-pack and 2-pack wood paints and furniture varnishes. For the purpose of 2 C paints Liocryl AM 920 can be combined with Liopur polyurethane dispersions. The emulsion can be used wherever high chemical resistance, plasticiser resistance and non-yellowing properties are required. voir moins | |
| Coapur™ XS 71 | Arkema Rheology & Specialty Additives | Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits vi...voir plus Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits viscosity drop after pigment paste addition, eliminates pigment flooding and floating during storage and enables to match excellent results based on rub-out test. voir moins | Request Sample |
| EFKA® SL 3288 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3288 is an additive designed to improve slip, levelling, surface smoothness and ‘soft-touch’ effect in high gloss coatings. It has a minimal effect on foam stabilisation and intercoat adhesion. Due to its excellent compatibility properties, it is...voir plus EFKA® SL 3288 is an additive designed to improve slip, levelling, surface smoothness and ‘soft-touch’ effect in high gloss coatings. It has a minimal effect on foam stabilisation and intercoat adhesion. Due to its excellent compatibility properties, it is very suitable for use in high-gloss clear coatings without causing haze. EFKA® SL 3288 is recommended for all kinds of solvent-based high-gloss coatings, especially wood finishes. It is also suitable for water-based industrial coatings. voir moins | |
| FOAMSTAR® SI 2250 | BASF Formulation Additives 巴斯夫配方助剂 | FOAMSTAR® SI 2250 can be used as a defoamer in various water-based coating systems and pigment concentrates. Due to its stability in high shear processing it functions well during the application of paints and lacquers. Due to its stability to high-shear ...voir plus FOAMSTAR® SI 2250 can be used as a defoamer in various water-based coating systems and pigment concentrates. Due to its stability in high shear processing it functions well during the application of paints and lacquers. Due to its stability to high-shear processing it functions well during the application of paints and lacquers and also prevents the entrapment of air during processing steps such as stirring, pumping etc. voir moins | |
| Bayhydrol® UV XP 2690 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2690 is a UV-curing PU-dispersion that is used for the formulation of waterborne UV coatings for wood and plastic coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 38-40, a viscosity at 23°C of < 80, ...voir plus Bayhydrol® UV XP 2690 is a UV-curing PU-dispersion that is used for the formulation of waterborne UV coatings for wood and plastic coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 38-40, a viscosity at 23°C of < 80, and a pH level of approx. 7.5-9. For the formulation of weather resistant coatings, the use of light protecting agents (preferably a combination of UV absorbers and hindered amine light stabilizers) is recommended. A modification of the photoinitiator component towards longer absorbing types (MAPO, BAPO) might be necessary. The resulting formulation should always be tested in weathering experiments with regard to the specific substrate, application and curing conditions. voir moins | |
| Amirez 142 | Incorez Ltd. | Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitabl...voir plus Amirez 142 is an APEO and formaldehyde free, reactive emulsified water borne curing agent for liquid epoxy resins. The product will undergo a chemical reaction with liquid epoxy resin. This reaction will yield a tough, durable, high gloss coating suitable for floor nd wall applications. It has rapid hardness development as well as good anti-corrosion and chemical resistance. It has improved flexibility, excellent aqueous dilution stability, and a fast cure with visible end of pot life. voir moins | Request Sample |
| Thixol™ 53 L | Arkema Rheology & Specialty Additives | Thixol™ 53 L is a liquid acrylic self-associative thickener providing a strong pseudoplastic rheological profile to water-based systems. This product significantly prevents from settling and sagging without affecting levelling properties. Thixol™ 53 L is ...voir plus Thixol™ 53 L is a liquid acrylic self-associative thickener providing a strong pseudoplastic rheological profile to water-based systems. This product significantly prevents from settling and sagging without affecting levelling properties. Thixol™ 53 L is solvent-, APEO- and tin-free. voir moins | Request Sample |
| Bayhydrol® UH 240 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 240 is an anionic polyester polyurethane dispersion used as combination binder in highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for plastics. It gives good surface handle and good resistance to abrasio...voir plus Bayhydrol® UH 240 is an anionic polyester polyurethane dispersion used as combination binder in highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for plastics. It gives good surface handle and good resistance to abrasion/water. This product has an Efflux time at 23°C, (4mmcup) of max. 70, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6-8, and a mean particle size of max. 210. Bayhydrol® UH 240 can be used in combination with hydrofunctional resins, preferably Bayhydrol® U XP 2428, and U 355 either U 475, in the formulation of highly flexible two-component polyurethane top coats (e.g. in soft-feel coating systems). After cross-linking, Bayhydur® 3100 force-drying (e.g. 30 - 45 min at 80°C) yields films with good surface handle and good resistance to abrasion and water. voir moins | |
| Foamaster® NO 2306 | BASF Formulation Additives 巴斯夫配方助剂 | Foamaster® NO 2306 (formerly Foamaster® 306) is a defoamer for aqueous paints and adhesives that is free of mineral oils and silicone oil. This product shows good defoaming properties when used in emulsion paints, latex-based masonry finishes and adhesive...voir plus Foamaster® NO 2306 (formerly Foamaster® 306) is a defoamer for aqueous paints and adhesives that is free of mineral oils and silicone oil. This product shows good defoaming properties when used in emulsion paints, latex-based masonry finishes and adhesives based on acrylics, styrene acrylics, vinyl acetate ethylene copolymers and alkyd emulsions. It is based on alkyl polyalkoxy esters and fatty esters. voir moins | |
| Loxanol® MI 6301 | BASF Formulation Additives 巴斯夫配方助剂 | Loxanol® MI 6301 (formerly Dehygant® LFM) is an in-can preservative for emulsion paints, emulsions and aqueous pigment pastes. It prevents spoilage by microorganisms during storage. | |
| EFKA® SL 3210 | BASF Formulation Additives 巴斯夫配方助剂 | EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA...voir plus EFKA® SL 3210 is a solution of a polysiloxane-modified polymer which is active at the substrate and air interfaces of inks and overprint varnishes. It has very broad compatibility with a broad range of printing ink systems. An applied film containing EFKA® SL 3210 is relatively insensitive to pinholing - even at high concentrations of the additive. This clear, colorless liquid may be used in water-based, solvent-based and UV-curable printing inks and over-print varnishes. EFKA® SL 3210 is especially effective in nitrocellulose-based systems for flexographic and gravure printing. It is also effective in UV flexographic printing. voir moins | |
| Nubifer NB-5970 Waterbased Concentrate at 60% (Formulation #W6387) | Ferro Pigments | Pigment concentrate of black Iron oxide with broad compatibility with different systems. |
