| Setaprint™ 2243 A | Lawter | Setaprint™ 2243 A is a phenolic modified rosin ester with a high viscosity, is moderately soluble and which displays a good solvent release. The resin shows good compatibility with drying oils, offering varnishes a hard and scuff-resistant surface. Setapr...Vea Mas Setaprint™ 2243 A is a phenolic modified rosin ester with a high viscosity, is moderately soluble and which displays a good solvent release. The resin shows good compatibility with drying oils, offering varnishes a hard and scuff-resistant surface. Setaprint™ 2243 A is ideally used in offset inks and coatings. Vea Menos | |
| PChem® BM164 | Pioneer Chemicals Co., Ltd. | PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, ...Vea Mas PChem® BM164, in the form of a powder, is a copolymer of n-butyl methacrylate and methyl methacrylate that offers durability and hard heat resistance. It is compatible with numerous nitrocellulose and solvents and commonly used in applications of sealer, marine coating, plastic coating, concrete cure, and is suitable for dear coating of exterior and interior concrete floors and road surface. PChem® BM164 has a molecular weight of 92,000 g/mol, moisture content of equal to or less than 0.5%, acid value of equal to or less than 3.0 mgKOH/g, and an inherent viscosity of 0.40. Vea Menos | |
| EBECRYL® 8701 | Allnex | EBECRYL® 8701 es un triacrilato de uretano alifático diseñado para reducir la brecha entre la alta dureza superficial y una excelente durabilidad en exteriores. EBECRYL 8701 se puede utilizar en aplicaciones que requieren una combinación de dureza, aument...Vea Mas EBECRYL® 8701 es un triacrilato de uretano alifático diseñado para reducir la brecha entre la alta dureza superficial y una excelente durabilidad en exteriores. EBECRYL 8701 se puede utilizar en aplicaciones que requieren una combinación de dureza, aumento de la Tg, la resistencia a los productos químicos y durabilidad al aire libre. Las películas de EBECRYL 8701 curadas por luz ultravioleta (UV) o haz de electrones (EB) presentan una combinación única de dureza superficial y durabilidad al aire libre que por lo general no se encuentra en una molécula. Se recomienda el uso de EBECRYL® 8701 en: revestimientos de plástico que requieren una buena durabilidad en exteriores, resistencia a los productos químicos y resistencia al rayado, OEM o acabado automotriz, recubrimientos para madera, revestimientos metálicos, recubrimientos post-moldeables para tubos de metal y conductos, recubrimientos ópticos, acabados que no se amarillean para madera, recubrimientos pigmentados para madera, tintas serigráficas y recubrimientos duraderos en exteriores. Vea Menos | Request Sample |
| Rexin K 411 | S.A.P.I.C.I. SpA | Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for ...Vea Mas Rexin K 411 is a branched saturated polyester. This product has high chemical resistance, abrasion resistance, and surface hardness. It is compatible with nitrocellulose, urea, and melamine resins. This product can be used in high-performance inks for prolonged and continuous use. Vea Menos | |
| 1,4-Cyclohexanedimethanol (CHDM) | Suny Chem | El 1,4-ciclohexanodimetanol (CHDM) es miscible con agua y alcohol, soluble en cetona e insoluble en éter e hidrocarburo alifático. Es a la vez duro y flexible, con una temperatura de transición vítrea (Glass Transition Temperature, TG) alta, y ofrece exce...Vea Mas El 1,4-ciclohexanodimetanol (CHDM) es miscible con agua y alcohol, soluble en cetona e insoluble en éter e hidrocarburo alifático. Es a la vez duro y flexible, con una temperatura de transición vítrea (Glass Transition Temperature, TG) alta, y ofrece excelente estabilidad al calor, buena solubilidad y buena resistencia al clima. Este producto se utiliza principalmente en poliésteres, como fibras de poliéster y resinas de poliéster no saturado, como PETG, PCT, PCTG, PCTA, entre otros. Puede aumentar la reactividad en los compuestos de poliéster y mejorar la estabilidad hidrolítica, la plasticidad, el brillo, la transparencia, la imprimibilidad y la capacidad de procesamiento del polímero. El CHDM también puede utilizarse en aplicaciones de revestimiento en polvo, lo que podría aumentar la resistencia a las bajas temperaturas y la resistencia al clima de los revestimientos y mejorar el brillo de la superficie del revestimiento. Vea Menos | |
| UVECOAT® 9146 | Allnex | UVECOAT® 9146 is an aliphatic unsaturated acrylic urethane polymer for use as a crosslinker with UVECOAT® resins in UV curable powder coatings. Use of UVECOAT® 9146 in a UV curable powder coating will enhance reactivity and improve surface hardness. | Request Sample |
| EBECRYL® 605 | Allnex | EBECRYL® 605 es el diacrilato epoxi de bisfenol A, EBECRYL® 600, diluido al 25% en peso con el diluyente reactivo diacrilato de tripropilenglicol (TRPGDA) para proporcionar un producto de viscosidad más baja y manejo más fácil. Presenta un color claro y r...Vea Mas EBECRYL® 605 es el diacrilato epoxi de bisfenol A, EBECRYL® 600, diluido al 25% en peso con el diluyente reactivo diacrilato de tripropilenglicol (TRPGDA) para proporcionar un producto de viscosidad más baja y manejo más fácil. Presenta un color claro y respuesta de curado rápido. Las películas de EBECRYL® 605 curadas mediante luz ultravioleta (UV) o haz de electrones (EB) exhiben alto brillo, dureza superficial y resistencia a los productos químicos sobresaliente. Se recomienda el uso de EBECRYL® 605 en: barnices de sobreimpresión, revestimientos para madera, aglomerado, papel y plásticos rígidos, tintas y revestimientos litográficos, mejora del papel, tintas y revestimientos serigráficos, adhesivos para laminaciones de papel y materiales de relleno para madera. Vea Menos | Request Sample |
| GENOMER* 3486 | Rahn USA Corp. | GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hard...Vea Mas GENOMER* 3486 is a very low viscosity polyester acrylate resin for UV/EB free radical-curable coatings, inks, adhesives and 3D printing. GENOMER* 3486 is recommended for applications where low viscosity, good adhesion, wear resistance and surface hardness are required. Vea Menos | Request Sample |
| RHOPLEX™ CL-106 | Univar Solutions | RHOPLEX™ CL-106 is an acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers are translucent in the can and upon application turn clea...Vea Mas RHOPLEX™ CL-106 is an acrylic emulsion has been designed for use in factory-applied clear topcoats for wood requiring the highest levels of appearance and surface hardness characteristics. Lacquers are translucent in the can and upon application turn clear very rapidly while drying. Vea Menos | Request Sample |
| EBECRYL® 640/20 TO | Allnex | EBECRYL® 640/20 TO is a modified diacrylate ester of bisphenol A epoxy resin. Films of it cured by UV or EB exhibit high surface hardness and gloss and the excellent solvent resistance typical of an epoxy resin. It finds broad use in UV/EB applications, s...Vea Mas EBECRYL® 640/20 TO is a modified diacrylate ester of bisphenol A epoxy resin. Films of it cured by UV or EB exhibit high surface hardness and gloss and the excellent solvent resistance typical of an epoxy resin. It finds broad use in UV/EB applications, such as inks, coatings and overprint varnishes. Vea Menos | Request Sample |
| Setaprint™ 2316 A | Lawter | Setaprint™ 2316 A is a phenolic modified rosin ester with medium viscosity and good aliphatic solubility, offering good low shear flow features. It facilitates hard, scuff-resistant surfaces in a large variety of ink systems. Setaprint™ 2316 A is commonly...Vea Mas Setaprint™ 2316 A is a phenolic modified rosin ester with medium viscosity and good aliphatic solubility, offering good low shear flow features. It facilitates hard, scuff-resistant surfaces in a large variety of ink systems. Setaprint™ 2316 A is commonly used in offset inks and coatings. Vea Menos | |
| MIRAMER M410 | Rahn USA Corp. | MIRAMER M410 is a polyetherpolyol tetraacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: inks (flexo, gravure, offset, screen); paper, board, and wood coatings; solder masks; and plastic coatings. The product combines low reaction shrinkage with a high surface hard...Vea Mas MIRAMER M410 is a polyetherpolyol tetraacrylate. It is a reactive diluent for radically curable inks, coatings and adhesives. This product is recommended for use in the following applications: inks (flexo, gravure, offset, screen); paper, board, and wood coatings; solder masks; and plastic coatings. The product combines low reaction shrinkage with a high surface hardness. Vea Menos | Request Sample |
| EBECRYL® 225 | Allnex | EBECRYL® 225 is a ten functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 225 exhibit outstanding surface hardness and low haze development after abrasion. In addition, EBECRYL® 225 does not contain intentionally added organic ...Vea Mas EBECRYL® 225 is a ten functional aliphatic urethane acrylate. After polymerization, films of EBECRYL® 225 exhibit outstanding surface hardness and low haze development after abrasion. In addition, EBECRYL® 225 does not contain intentionally added organic tin compounds, heavy metals or quinones. Vea Menos | Request Sample |
| CN1002 | Sartomer Americas | CN1002 is an oligomer that combines abrasion resistance and flexibility with hardness and fast cure response. CN1002 is specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of b...Vea Mas CN1002 is an oligomer that combines abrasion resistance and flexibility with hardness and fast cure response. CN1002 is specifically tailored to promote a rapid surface cure with UV LEDs or other low energy light sources. It is well suited for curing of both inks and hardcoat formulations. The suggested level of addition is 15-20% of the total formulation. Vea Menos | |
| L-3042 | Chan Sieh Enterprises Co, Ltd. | L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coati...Vea Mas L-3042 is an aliphatic polycarbonate polyol that is very hard, tough, and flexible. Featuring good chemical, solvent, water, humidity, and UV resistance, this product is well suited for use in applications such as PVC flooring topcoats, primers and coatings for metal and plastic surfaces, lacquers and coatings for wood and parquet floors, overprint varnishes, furniture coatings, and textured coatings. Vea Menos | |
| POLYTONE K 95 | Polyols & Polymers | Use of this resin in general improves gloss, hardness, filling, adhesive strength and durability. Is highly effective in imparting gloss, adhesiveness in the inks and also in increasing the solid content in flexo & gravure inks. Used in the manufacture of...Vea Mas Use of this resin in general improves gloss, hardness, filling, adhesive strength and durability. Is highly effective in imparting gloss, adhesiveness in the inks and also in increasing the solid content in flexo & gravure inks. Used in the manufacture of all types of nitrolacquers and is most suitable for paper lacquers. This resin is useful in the manufacture of PVC lacquers and for polishing lacquers and finishes for the surface treatment of wooden furniture and articles. Vea Menos | |
| POLYTONE K 96 | Polyols & Polymers | Use of this resin in general improves gloss, hardness, filling, adhesive strength and durability. Is highly effective in imparting gloss, adhesiveness in the inks and also in increasing the solid content in flexo & gravure inks. Used in the manufacture of...Vea Mas Use of this resin in general improves gloss, hardness, filling, adhesive strength and durability. Is highly effective in imparting gloss, adhesiveness in the inks and also in increasing the solid content in flexo & gravure inks. Used in the manufacture of all types of nitrolacquers and is most suitable for paper lacquers. This resin is useful in the manufacture of PVC lacquers and for polishing lacquers and finishes for the surface treatment of wooden furniture and articles. Vea Menos | |
| POLYTONE K 97 HH | Polyols & Polymers | Use of this resin in general improves gloss, hardness, filling, adhesive strength and durability. Is highly effective in imparting gloss, adhesiveness in the inks and also in increasing the solid content in flexo & gravure inks. Used in the manufacture of...Vea Mas Use of this resin in general improves gloss, hardness, filling, adhesive strength and durability. Is highly effective in imparting gloss, adhesiveness in the inks and also in increasing the solid content in flexo & gravure inks. Used in the manufacture of all types of nitrolacquers and is most suitable for paper lacquers. This resin is useful in the manufacture of PVC lacquers and for polishing lacquers and finishes for the surface treatment of wooden furniture and articles. Vea Menos | |
| POLYTONE K 97 | Polyols & Polymers | Use of this resin in general improves gloss, hardness, filling, adhesive strength and durability. Is highly effective in imparting gloss, adhesiveness in the inks and also in increasing the solid content in flexo & gravure inks. Is used in the manufacture...Vea Mas Use of this resin in general improves gloss, hardness, filling, adhesive strength and durability. Is highly effective in imparting gloss, adhesiveness in the inks and also in increasing the solid content in flexo & gravure inks. Is used in the manufacture of all types of nitrolacquers and is most suitable for paper lacquers. This resin is useful in the manufacture of PVC lacquers and for polishing lacquers and finishes for the surface treatment of wooden furniture and articles. Vea Menos | |
| EBECRYL® 3700 | Allnex | Ebecryl® 3700 es el éster diacrilato de una resina epoxi de bisfenol A y presenta bajo olor y una respuesta de curado excepcional. Las películas de EBECRYL® 3700 curadas por luz ultravioleta (UV) o haz de electrones (EB) demuestran alta dureza superficial...Vea Mas Ebecryl® 3700 es el éster diacrilato de una resina epoxi de bisfenol A y presenta bajo olor y una respuesta de curado excepcional. Las películas de EBECRYL® 3700 curadas por luz ultravioleta (UV) o haz de electrones (EB) demuestran alta dureza superficial, alto brillo y una excelente resistencia a los productos químicos. Encuentra amplio uso en aplicaciones bajo UV/EB como recubrimientos, barnices de sobreimpresión, tintas, adhesivos y dispositivos electrónicos. Vea Menos | Request Sample |
| Epoxy Acrylate SE 1700 | Soltech Ltd | Epoxy Acrylate SE 1700 is a hdiacrylate ester of bisphenol A epoxy acrylate oligomer designed to provide water resistance, chemical resistance, surface hardness, high gloss, and a fast curing response. This product is commonly used in applications such as...Vea Mas Epoxy Acrylate SE 1700 is a hdiacrylate ester of bisphenol A epoxy acrylate oligomer designed to provide water resistance, chemical resistance, surface hardness, high gloss, and a fast curing response. This product is commonly used in applications such as wood sealers, overprint varnishes, laminating adhesives, screen inks, and lithographic inks. Epoxy Acrylate SE 1700 is 100% polymer solid by weight with a viscosity of 2,000-5,000 at 25℃. Vea Menos | |
| ACURE™ 510-190 | Allnex | ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardnes...Vea Mas ACURE™ 510-190 is the donor resin in extremely fast drying topcoats for use in Marine and Protective and various premium, non-isocyanate topcoat systems, which is modified with s-SCA. ACURE™ based topcoats based on ACURE™ 510-190 feature excellent hardness development coupled with excellent outdoor durability, high cross line densities, outstanding chemical resistance and improved SAG resistance on vertical surfaces. Vea Menos | Request Sample |
| EBECRYL® 600/50 TM | Allnex | EBECRYL® 600-50 TM is a bisphenol A epoxy diacrylate diluted with 50% of trimethylolpropane triacrylate (TMPTA) monomer. EBECRYL® 600/50 TM is characterized by its light colour, low odour and fast cure response. Films of EBECRYL® 600/50 TM cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss, high surface hard...Vea Mas EBECRYL® 600-50 TM is a bisphenol A epoxy diacrylate diluted with 50% of trimethylolpropane triacrylate (TMPTA) monomer. EBECRYL® 600/50 TM is characterized by its light colour, low odour and fast cure response. Films of EBECRYL® 600/50 TM cured by ultraviolet light (UV) or electron beam (EB) exhibit high gloss, high surface hardness and the good solvent resistance typical of an epoxyresin. Vea Menos | Request Sample |
| LAROMER® PO 43 F | BASF Dispersions & Resins | Laromer® PO 43 is a polyether-modified acrylate oligomer. shows a very balanced property profile and can be used as a sole binder in energy curable formulations for a variety of applications. It is recommended for use in energy curable flexo, screen, and offset inks, and overprint varnishes. In addition to chemical resistance, cured inks and overprint varnishes provide good surface hard...Vea Mas Laromer® PO 43 is a polyether-modified acrylate oligomer. shows a very balanced property profile and can be used as a sole binder in energy curable formulations for a variety of applications. It is recommended for use in energy curable flexo, screen, and offset inks, and overprint varnishes. In addition to chemical resistance, cured inks and overprint varnishes provide good surface hardness in combination with Irgacure® 819, Lucirin® TPO, Lucirin® TPO-L, and Benzophenone. Vea Menos | |
| EBECRYL® 3748/20 | Allnex | EBECRYL® 3748/20 is a bisphenol A epoxy diacrylate, diluted 20% by weight with the reactive diluent glycerol propoxylate triacrylate (OTA 480)(1) for reduced viscosity and easier handling. \r\nEBECRYL® 3748/20 exhibits light color and fast cure response. Films of EBECRYL® 3748/20 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hard...Vea Mas EBECRYL® 3748/20 is a bisphenol A epoxy diacrylate, diluted 20% by weight with the reactive diluent glycerol propoxylate triacrylate (OTA 480)(1) for reduced viscosity and easier handling. \r\nEBECRYL® 3748/20 exhibits light color and fast cure response. Films of EBECRYL® 3748/20 cured via exposure to ultraviolet light (UV) or electron beam (EB) demonstrate high surface hardness, gloss and excellent chemical resistance. Vea Menos | Request Sample |
| Ottopol 510-28 | Gellner Industrial, LLC | Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as well as excellent solvent, salt fog, and alkali-resistance. Ottopol 510-28 offers good adhesion to non-porous surfaces and provides better storage stability, superior hard...Vea Mas Ottopol 510-28 is a hazy, water-based, industrial, anionic hydroxyl functional acrylic solution polymer. This product crosslinks with melamine and epoxy resins which exhibits very good gloss, finish, and clarity. It possesses anti-corrosion properties as well as excellent solvent, salt fog, and alkali-resistance. Ottopol 510-28 offers good adhesion to non-porous surfaces and provides better storage stability, superior hardness, and improved flow. It imparts superb weatherability and improved solubility. Vea Menos | |
| EBECRYL® 810 | Allnex | EBECRYL® 810 es un tetraacrilato de poliéster que presenta una baja viscosidad y buena respuesta de curado. Las películas curadas por UV o EB exhiben dureza superficial, resistencia a los productos químicos y una buena adherencia en general. Es especialme...Vea Mas EBECRYL® 810 es un tetraacrilato de poliéster que presenta una baja viscosidad y buena respuesta de curado. Las películas curadas por UV o EB exhiben dureza superficial, resistencia a los productos químicos y una buena adherencia en general. Es especialmente adecuado para los métodos de aplicación que requieren baja viscosidad tales como revestimientos mediante pulverización y vacío sin solvente. Se recomienda para: recubrimientos para papel, madera y plásticos, mejora del papel, revestimientos aplicados mediante vacío, tintas flexográficas, adhesivos de laminado de papel de aluminio curado bajo la luz UV, y aplicaciones de estucado mediante pulverización y flujo sin solventes. Vea Menos | Request Sample |
| NANOCRYL® C 150 | Evonik Operations GmbH, BL Coating Additives | Nanocryl® C 150 es un líquido transparente, levemente amarillo, de 50%peso nanopartículas de sílice en triacrilato de trimetilolpropano. Presenta gran dureza de superficie y alta densidad reticulante en barnices de sobreimpresión y capas superiores plásti...Vea Mas Nanocryl® C 150 es un líquido transparente, levemente amarillo, de 50%peso nanopartículas de sílice en triacrilato de trimetilolpropano. Presenta gran dureza de superficie y alta densidad reticulante en barnices de sobreimpresión y capas superiores plásticas. Tiene una excelente resistencia a las raspaduras y la abrasión, sin disminuir la transparencia. Presenta buena adherencia sobre aluminio/vidrio, reducida retracción por cura y efecto de barrera. Contribuye a repeler la suciedad y se adhiere muy bien al plástico. Vea Menos | Request Sample |
| EBECRYL® 605/40 | Allnex | EBECRYL® 605/40 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL® 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hard...Vea Mas EBECRYL® 605/40 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 40% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/40 exhibits light color and fast cure response. Films of EBECRYL® 605/40 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and superior chemical resistance. Vea Menos | Request Sample |
| EBECRYL® 605/20 | Allnex | EBECRYL® 605/20 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/20 exhibits light color and fast cure response. Films of EBECRYL® 605/20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hard...Vea Mas EBECRYL® 605/20 is the bisphenol A epoxy diacrylate, EBECRYL® 600, diluted 20% by weight with the reactive diluent tripropylene glycol diacrylate (TPGDA)(1) to provide a lower viscosity, easier handling product. EBECRYL® 605/20 exhibits light color and fast cure response. Films of EBECRYL® 605/20 cured via ultraviolet light (UV) or electron beam (EB) demonstrate high gloss, surface hardness, and the superior chemical resistance typical of an epoxy resin. Vea Menos | Request Sample |
| UCECOAT® 7674 | Allnex | UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under acidic conditions. UCECOAT 7674 contains no co-solvent. UCECOAT 7674 exhibits outstanding wetting of wood surfaces, imparting warmth and richness to the appearance of the wood. UCECOAT 7674 provides hard...Vea Mas UCECOAT® 7674 is an acrylated polyurethane dispersion in water designed for waterborne UV/EB curable coatings. UCECOAT 7674 is anionic in nature, making it compatible with water without any external emulsifier. Due to the presence of these ionic groups, it is not stable under acidic conditions. UCECOAT 7674 contains no co-solvent. UCECOAT 7674 exhibits outstanding wetting of wood surfaces, imparting warmth and richness to the appearance of the wood. UCECOAT 7674 provides hardness in the polymerized coating along with good stain and chemical resistance. Vea Menos | Request Sample |
| Ottopol K-65 | Gellner Industrial, LLC | Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...Vea Mas Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-65 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. Vea Menos | |
| Ottopol K-66 | Gellner Industrial, LLC | Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...Vea Mas Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-66 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. Vea Menos | |
| LAROMER® PO 8967 | BASF Dispersions & Resins | Laromer® PO 8967 is a polyether-modified acrylate oligomer. It is lower viscosity version of Laromer® PO 43 F, which shows a very balanced property profile and can be used as a sole binder in UV energy curable formulations for a variety of applications. Laromer® PO 8967 is recommended for use in energy curable flexo, screen, and offset inks and overprint varnishes. Cured inks and overprint varnishes formulated with Laromer® PO 8967 exhibit resistance to chemicals and provide good surface hard...Vea Mas Laromer® PO 8967 is a polyether-modified acrylate oligomer. It is lower viscosity version of Laromer® PO 43 F, which shows a very balanced property profile and can be used as a sole binder in UV energy curable formulations for a variety of applications. Laromer® PO 8967 is recommended for use in energy curable flexo, screen, and offset inks and overprint varnishes. Cured inks and overprint varnishes formulated with Laromer® PO 8967 exhibit resistance to chemicals and provide good surface hardness in combination with Lucirin® TPO, Lucirin TPO-L and Benzophenone. Vea Menos | |
| Terlon™ 307 A | Lawter | Terlon™ 307 A is a drying oil alkyd with a linseed base in an alkyd that has good pigment wetting abilities and fast, hard-drying properties. It has the ability to carry and print a higher pigment load than conventional alkyds and bodied oils. Flushing or...Vea Mas Terlon™ 307 A is a drying oil alkyd with a linseed base in an alkyd that has good pigment wetting abilities and fast, hard-drying properties. It has the ability to carry and print a higher pigment load than conventional alkyds and bodied oils. Flushing or grinding with the product yields more cleanliness and color strength than conventional wetting systems, while still retaining good flow characteristics. Terlon™ 307 A is a good pigment binder on most printable surfaces and is used in applications such as coldset, web heatset, varnishes and metal decorating inks. Vea Menos | |
| Terlon™ 311 A | Lawter | Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flu...Vea Mas Terlon™ 311 A is a drying oil alkyd in a linseed base displaying good pigment wetting ability along with hard and fast-drying properties. The product is able to carry and print higher pigment loads than conventional alkyds and bodied oils. Grinding or flushing of the product results in more color strength and cleanliness than conventional wetting systems, while keeping good flow characteristics. It is an ideal pigment binder with an ability to print on most printable surfaces. Such applications include metal decorating inks, coldset systems, web heatset inks, sheet-fed inks and varnishes. Vea Menos | |
| SPHERILEX® DP-0110 | Evonik Operations GmbH, BL Coating Additives | SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss....Vea Mas SPHERILEX® DP-0110 has the smallest particle size within the SPHERILEX® family of products, making it ideal for thin film applications or systems where smaller particle-sized pigments are preferred to promote surface smoothness and higher 85-degree gloss. In particular, SPHERILEX® DP-0110 is ideal for achieving burnish-and scrub-resistant satin and eggshell finishes, and, when used in combination with silica matting agents, can enable deep matte, natural-looking wood coatings that have improved scratch, burnish, and mar resistance. It can also significantly improve the hardness of coil coatings. Vea Menos | Request Sample |
| CN9101 | Sartomer Americas | CN9101 es un oligómero alifático alílico funcional 100% reactivo. CN9101 puede utilizarse en polimerizaciones de radicales libres a baja temperatura o fotocuradas como un iniciador latente o reticulante para eliminar la pegajosidad de las superficies prod...Vea Mas CN9101 es un oligómero alifático alílico funcional 100% reactivo. CN9101 puede utilizarse en polimerizaciones de radicales libres a baja temperatura o fotocuradas como un iniciador latente o reticulante para eliminar la pegajosidad de las superficies producida por la Inhibición de aire. CN9101 puede utilizarse como agente reticulante en revestimientos curados con peróxido de dos componentes a temperatura ambiente o elevada. Se alcanzan tiempos de secado sin pegajosidad de 3 a 12 horas a temperatura ambiente o de 10 a 40 minutos desde 65 hasta 120 ºC. Los revestimientos producidos tienen buen desarrollo de dureza y buena resistencia química. Las aplicaciones sugeridas incluyen: adhesivos y adhesivos de curado con peróxido, polímeros moldeados, revestimientos y revestimientos curados con peróxido con alto contenido de sólidos, compuestos y compuestos de moldeo abierto. Vea Menos |
