| CYMEL® UI-21-E Resin | Allnex | La resina CYMEL® UI-21-E es una resina de urea parcialmente iso-butilada suministrada en etanol. Ha sido diseñada para una amplia gama de acabados industriales de madera alto espesor y poco olor. | Request Sample |
| CYMEL® UI-27-EI | Allnex | La resina CYMEL® UI-27-EI es una resina de urea parcialmente iso-butilada suministrada en una mezcla de etanol e iso-butanol. Es adecuada para usar tanto en aplicaciones de revestimiento de madera de curado con ácido como en formulaciones industriales de ...Vea Mas La resina CYMEL® UI-27-EI es una resina de urea parcialmente iso-butilada suministrada en una mezcla de etanol e iso-butanol. Es adecuada para usar tanto en aplicaciones de revestimiento de madera de curado con ácido como en formulaciones industriales de imprimación en general y capas de protección. Este producto no es adecuado para aplicaciones en el exterior. Vea Menos | Request Sample |
| CYMEL® UI-38-I Resin | Allnex | La resina CYMEL® UI-38-I es un agente de reticulación de urea parcialmente iso-butilado suministrado en iso-butanol y destinado para su uso en aplicaciones de secado industrial y especialmente en sistemas aplicados por pulverización electrostática. Debido...Vea Mas La resina CYMEL® UI-38-I es un agente de reticulación de urea parcialmente iso-butilado suministrado en iso-butanol y destinado para su uso en aplicaciones de secado industrial y especialmente en sistemas aplicados por pulverización electrostática. Debido a la pobre resistencia a la intemperie de las resinas de urea, este producto no se recomienda para aplicaciones en el exterior. Vea Menos | Request Sample |
| CYMEL® XW 3106 | Allnex | La resina CYMEL® XW 3106 es un agente de reticulación de melamina de alto contenido en sólidos, especialmente diseñado para formulaciones de dos componentes a base de solventes a temperaturas de horneado bajas y ambiente. El potencial de curado a baja tem...Vea Mas La resina CYMEL® XW 3106 es un agente de reticulación de melamina de alto contenido en sólidos, especialmente diseñado para formulaciones de dos componentes a base de solventes a temperaturas de horneado bajas y ambiente. El potencial de curado a baja temperatura para este agente de reticulación proporciona la oportunidad de formular revestimientos de alto rendimiento para sustratos sensibles al calor. Estos sistemas tienen unas excelentes propiedades de dureza temprana, resistencia, aspecto y flexibilidad en ciclos de frío-calor. Vea Menos | Request Sample |
| DAPRO® DF 1492 | Elementis | DAPRO® DF 1492 es un rompe burbujas altamente efectivo libre de silicona. Este producto se utiliza principalmente para reducir o eliminar la espuma existente antes de rellenar, y como desespumante en aplicaciones de impresiones flexográficas y fotograbado...Vea Mas DAPRO® DF 1492 es un rompe burbujas altamente efectivo libre de silicona. Este producto se utiliza principalmente para reducir o eliminar la espuma existente antes de rellenar, y como desespumante en aplicaciones de impresiones flexográficas y fotograbado. Debe utilizarse cuando se necesita un efecto inmediato a corto plazo. Los componentes no volátiles del supresor de espuma DAPRO® DF 1492 cumplen con las normas de la FDA, contenidas bajo el título 21 175.300 del CFR . Vea Menos | |
| DAPRO® DF 1760 | Elementis | DAPRO® DF 1760 es un rompe burbujas altamente efectivo libre de silicona de larga duración. Este producto conserva su efectividad aún tras un largo período de almacenamiento del sistema en el que fue utilizado. Los componentes no volátiles del supresor d...Vea Mas DAPRO® DF 1760 es un rompe burbujas altamente efectivo libre de silicona de larga duración. Este producto conserva su efectividad aún tras un largo período de almacenamiento del sistema en el que fue utilizado. Los componentes no volátiles del supresor de espuma DAPRO® DF 1760 cumplen con las normas de la FDA, contenidas bajo los títulos 21 175.105; 175.300; 176.170 y 176.180 del CFR. Vea Menos | |
| DAPRO® DF 5300 | Elementis | DAPRO® DF 5300 es un agente liberador de burbujas, antiespuma para una amplia gama de revestimientos a base de solvente. Sus aplicaciones incluyen esmaltes alquídicos, PUR, epóxi y acrílicos. | |
| DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | |
| DAPRO® DF 7005 | Elementis | DAPRO® DF 7005 es un desespumante líquido sin silicona, económico en el uso, para aplicaciones universales de base acuosa. El producto demuestra buena eficiencia a largo plazo. | |
| DAPRO® DF 7007 | Elementis | DAPRO® DF 7007 es un catalizador quelante que reemplaza a los secadores a base de cobalto en revestimientos acuosos. | |
| DAPRO® DF 7010 | Elementis | DAPRO® DF 7010 es un desespumante líquido sin silicona, económico en el uso, para aplicaciones universales de base acuosa. El producto demuestra buena eficiencia a largo plazo. | |
| DAPRO® DF 7015 | Elementis | DAPRO® DF 7010 es un desespumante para sistemas acuosos con muy buenas propiedades emulsionantes. Está especialmente recomendado para su uso en pastas para pulir, tintas y pinturas plásticas. | |
| DAPRO® DF 7540 | Elementis | DAPRO® DF 7540 es un desespumante líquido libre de silicona para uso en sistemas de base acuosa. Este producto tiene extraordinarias propiedades emulsionantes en agua. | |
| DAPRO® DF 7580 | Elementis | DAPRO® DF 7580 es un desespumante libre de silicona para uso en sistemas de base acuosa. Este producto es fácilmente emulsionable en agua. | |
| DAPRO® DF 880 | Elementis | DAPRO® DF 880 es un aditivo para liberar aire, sin silicona, que puede utilizarse para prevenir la formación de espuma en sistemas de revestimiento. Este producto rompe rápidamente las burbujas en películas húmedas aplicadas y evita que el aire quede atra...Vea Mas DAPRO® DF 880 es un aditivo para liberar aire, sin silicona, que puede utilizarse para prevenir la formación de espuma en sistemas de revestimiento. Este producto rompe rápidamente las burbujas en películas húmedas aplicadas y evita que el aire quede atrapado durante etapas de procesamiento como la molienda, la mezcla o el bombeo. Vea Menos | |
| DAPRO® DF 975 | Elementis | DAPRO® DF 975 es un desespumante libre de silicona basado en una dispersión de sólidos olefínicos. Este producto ofrece excelente control de la espuma en aplicaciones de arquitectura, pinturas y revestimientos industriales y tintas. | |
| DAPRO® FA-NCO-6 | Elementis | DAPRO® FA W-34 es una dispersión de agentes opacificantes en alcoholes minerales. Ofrece consistencia, fácil incorporación en la mezcla y reducción uniforme y eficaz del brillo. | |
| DAPRO® FK 321 | Elementis | DAPRO® FK 321 es un auxiliar efectivo para reducir la resistencia de las pinturas que se aplican electrostáticamente mediante aerosol. | |
| DAPRO® FX 511 | Elementis | DAPRO® FX 511 es un agente fusionante de bajo olor diseñado para dispersiones, pinturas de dispersión y yeso. | |
| DAPRO® FX 513 | Elementis | DAPRO® FX 513 es un agente de fusión ecológico preparado a partir de recursos renovables. Está especialmente diseñado para sistemas de pintura de bajo COV. Este producto demuestra una excelente formación de películas, resistencia a los rayones, brillo mej...Vea Mas DAPRO® FX 513 es un agente de fusión ecológico preparado a partir de recursos renovables. Está especialmente diseñado para sistemas de pintura de bajo COV. Este producto demuestra una excelente formación de películas, resistencia a los rayones, brillo mejorado y mayor tiempo de reposo abierto. Vea Menos | |
| DAPRO® FX 514 | Elementis | DAPRO® FX 514 es un agente de fusión ecológico preparado a partir de recursos renovables. Está especialmente diseñado para sistemas de pintura de bajo COV, en especial adhesivos. Este producto es inodoro y libre de COV. DAPRO® FX 514 demuestra una excelen...Vea Mas DAPRO® FX 514 es un agente de fusión ecológico preparado a partir de recursos renovables. Está especialmente diseñado para sistemas de pintura de bajo COV, en especial adhesivos. Este producto es inodoro y libre de COV. DAPRO® FX 514 demuestra una excelente formación de películas, resistencia a los rayones, brillo mejorado y mayor tiempo de reposo abierto. Vea Menos | |
| DAPRO® NA 1622 | Elementis | DAPRO® NA 1622 es un líquido desespumante modificado con silicona para uso en sistemas a base de solvente. Posee excelentes propiedades desespumantes en una amplia variedad de sistemas solventes. DAPRO® NA 1622 es fácil de incorporar en tintas y revestimi...Vea Mas DAPRO® NA 1622 es un líquido desespumante modificado con silicona para uso en sistemas a base de solvente. Posee excelentes propiedades desespumantes en una amplia variedad de sistemas solventes. DAPRO® NA 1622 es fácil de incorporar en tintas y revestimientos a base de solvente. Vea Menos | |
| DAPRO® U-99 | Elementis | DAPRO® U-99 es un modificador de tensión interfacial de alto rendimiento diseñado para utilizar en cantidades relativamente bajas a fin de eliminar o disminuir defectos en las películas. Es especialmente efectivo en sistemas epóxi de dos componentes a bas...Vea Mas DAPRO® U-99 es un modificador de tensión interfacial de alto rendimiento diseñado para utilizar en cantidades relativamente bajas a fin de eliminar o disminuir defectos en las películas. Es especialmente efectivo en sistemas epóxi de dos componentes a base de solvente y en sistemas alquídicos acuosos o a base de solvente, y en revestimientos decorativos. Vea Menos | |
| DAPRO® UW 461 | Elementis | DAPRO® UW 46 is a high molecular weight modified silicone that delivers slip, mar-resistance and anti-blocking performance in water borne and high polarity systems. | |
| DAPRO® W-77 | Elementis | DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-w...Vea Mas DAPRO® W-77 is an interfacial tension modifier which will eliminate or diminish film defects such as crawling, fish eyes, and some forms of cratering in waterborne aqueous formulations. It can also promote spreading and uniform film formation on hard-to-wet or contaminated surfaces. DAPRO® W-77 also provides excellent recoatability. DAPRO® W-77 is silicone - free. Vea Menos | |
| DAPRO® W-95HS | Elementis | DAPRO® W-95HS es un modificador de la tensión de superficie para sistemas acuosos. Este producto mejora el flujo y las propiedades de nivelación de tintas y revestimientos. | |
| DDSA | Univar Solutions | DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fu...Vea Mas DDSA is dodecenylsuccinic anhydride, in which the R group is a mixture of alkenyl groups derived from propylene tetramer. It is used primarily as a curing agent for epoxy resins. Other applications include intermediates for corrosion inhibitors used in fuels and lubricating oils. Vea Menos | Request Sample |
| Decabromodiphenyl Oxide | Chemceed | El óxido de decabromodifenilo se usa como retardador de llama para elastómeros, alambres y cables, revestimientos textiles, equipos eléctricos y electrónicos, repuestos automotrices y materiales de construcción. | |
| Decoupage MNP | Univar Solutions | Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage co...Vea Mas Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage coating. Decoupage MNP can also be used in other nonylphenol applications where color stability is of prime importance. Vea Menos | Request Sample |
| DEE FO® 1015 | Munzing Chemie | DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and a...Vea Mas DEE FO® 1015 is a liquid opaque off-white defoamer that is used for aqueous systems. It provides effectiveness, persistence, stability and high efficiency. It is commonly used for architectural, industrial and wood coatings, as well as printing inks and adhesives. Vea Menos | |
| DEE FO® 3010E/50 | Munzing Chemie | DEE FO® 3010E/50 is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, and mineral oil. It is an effective defoamer for printing inks as it provides good initial foam knockdown when used as a press-die defoamer. It is c...Vea Mas DEE FO® 3010E/50 is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, and mineral oil. It is an effective defoamer for printing inks as it provides good initial foam knockdown when used as a press-die defoamer. It is commonly used for corrugated, film and foil, press-side and screen ink printing inks. Vea Menos | |
| DEE FO® 718 | Munzing Chemie | DEE FO® 718 is a liquid transparent gold-tinted defoamer for aqueous systems. It has good efficiency, persistence, and ease of incorporation and is commonly used for printing press applications and flexographic news inks. | |
| DEE FO® 725E | Munzing Chemie | DEE FO® 725E is a liquid transparent yellow defoamer that is a blend of glycols and polysiloxane. It is a multi-purpose printing ink and general coatings defoamer that has good dispersion and persistence. It is commonly used in architectural, industrial, ...Vea Mas DEE FO® 725E is a liquid transparent yellow defoamer that is a blend of glycols and polysiloxane. It is a multi-purpose printing ink and general coatings defoamer that has good dispersion and persistence. It is commonly used in architectural, industrial, and wood coatings, and corrugated printing ink. Vea Menos | |
| DEE FO® PG-2 | Munzing Chemie | DEE FO® PG-2 is a liquid off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It has good foam control during letdown and is commonly used in the pigment grinding process for ink applications and high performance co...Vea Mas DEE FO® PG-2 is a liquid off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It has good foam control during letdown and is commonly used in the pigment grinding process for ink applications and high performance coatings. Vea Menos | |
| DEE FO® PG-20 | Munzing Chemie | DEE FO® PG-20 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink applications that reduces process foam in all color dispersions that helps increas...Vea Mas DEE FO® PG-20 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink applications that reduces process foam in all color dispersions that helps increase filling and color strength. It is commonly used in high performance coatings and water-based inks. Vea Menos | |
| DEE FO® PG-30 | Munzing Chemie | DEE FO® PG-30 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink application that helps increase filling and color strength. It is commonly used du...Vea Mas DEE FO® PG-30 is a liquid opaque off-white defoamer that is a blend of 3-dimensional siloxane and polyoxyalkylene technology. It is a good pigment grinding defoamer for ink application that helps increase filling and color strength. It is commonly used during pigment grinding for TiO2, color, black and universal colorants. Vea Menos | |
| DEE FO® PI-12 | Munzing Chemie | DEE FO® PI-12 is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica, polyoxyalkylene technology and mineral oil. It is a good foam control additive that is designed for OPV and printing inks, such as corrugated, coated pape...Vea Mas DEE FO® PI-12 is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica, polyoxyalkylene technology and mineral oil. It is a good foam control additive that is designed for OPV and printing inks, such as corrugated, coated paper, packaging, film and foil. Vea Menos | |
| DEE FO® PI-16P | Munzing Chemie | DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations....Vea Mas DEE FO® PI-16P is a liquid opaque straw color defoamer that is a blend of special hydrophobic silica and polyoxyalkylene technology. It is an anti-foaming agent, which provides excellent stability and persistence in a wide variety of aqueous formulations. It is commonly used in corrugated, envelope, film and foil, and metallic printing inks, and can be used in PVOH adhesives. Vea Menos | |
| DEE FO® PI-320 | Munzing Chemie | DEE FO® PI-320 is a liquid opaque white colored defoamer that is a blend of 3-Dimensional siloxane and polyoxyalkylene technology. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used as a corrugated, flexible packagi...Vea Mas DEE FO® PI-320 is a liquid opaque white colored defoamer that is a blend of 3-Dimensional siloxane and polyoxyalkylene technology. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used as a corrugated, flexible packaging, and film and foil printing inks, as well as OPV's and clear, wood, top, high gloss architectural and industrial spray coatings. Vea Menos | |
| DEE FO® PI-35 | Munzing Chemie | DEE FO® PI-35 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used during the grind stage, as a press-side defoamer and d...Vea Mas DEE FO® PI-35 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a siloxane compound defoamer designed for aqueous printing inks. It is commonly used during the grind stage, as a press-side defoamer and during final ink formulations of various printing inks. It is commonly used in most corrugated, packaging, envelope, metallic inks, news inks, and coatings for flooring. Vea Menos | |
| DEE FO® PI-40 | Munzing Chemie | DEE FO® PI-40 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is commonly used in combination with defoaming persistence and pinhole free substrate wetting. It is commonly used in printing ink application...Vea Mas DEE FO® PI-40 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is commonly used in combination with defoaming persistence and pinhole free substrate wetting. It is commonly used in printing ink applications, such as corrugated, packaging, film/foil, coated paper, and screen inks. It is also used in OPV, emulsion polymers, industrial paints, wood coatings, and adhesives. Vea Menos | |
| DEE FO® PI-45 | Munzing Chemie | DEE FO® PI-45 is a liquid translucent off-white defoamer that is a blend of 3-Dimensional siloxane and water. It is a defoamer for aqueous systems that is commonly used in news printing inks and in color printing inks during the pigment grinding process. | |
| DEE FO® PI-547 | Munzing Chemie | DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids c...Vea Mas DEE FO® PI-547 is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil free product designed for use in PVOH adhesives, high solids content coatings and printing ink. It is also used for aqueous ink systems include flexible film, OPV and metallic. Vea Menos | |
| DEE FO® PI-75 | Munzing Chemie | DEE FO® PI-75 is a liquid light yellow defoamer that is a blend of 3-Dimensional siloxane, organo-modified siloxane and water. It is a defoamer for aqueous systems that is a combination of defoaming performance and error-free substrate wetting in OPV and ...Vea Mas DEE FO® PI-75 is a liquid light yellow defoamer that is a blend of 3-Dimensional siloxane, organo-modified siloxane and water. It is a defoamer for aqueous systems that is a combination of defoaming performance and error-free substrate wetting in OPV and most printing ink applications. It is commonly used in corrugated, packaging, envelope, film and foil, and news ink formulations. Vea Menos | |
| DEE FO® XRM-1537A | Munzing Chemie | DEE FO® XRM-1537A is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, mineral oil and water. It is a defoamer for aqueous systems that has a unique and easily applied printing ink defoamer specifically designed for pr...Vea Mas DEE FO® XRM-1537A is a liquid opaque off-white defoamer that is a blend of special wax, hydrophobic silica, mineral oil and water. It is a defoamer for aqueous systems that has a unique and easily applied printing ink defoamer specifically designed for press-side use. Vea Menos | |
| DEE FO® XRM-1547A | Munzing Chemie | DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV sys...Vea Mas DEE FO® XRM-1547A is a liquid translucent straw-colored defoamer that is a blend of hydrophobic silica and polyoxyalkylene technology. It is a defoamer for aqueous systems that is a universal oil-free product designed for use in PVOH adhesives and OPV systems. It is also commonly used in printing ink formulations, such as film/foil, envelope and metallic. Vea Menos | |
| Dehydrated Castor Fatty Acid - H Grade | Alnor Oil Company, Inc. | Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for us...Vea Mas Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for use in a wide range of applications. Vea Menos | |
| Dehydrated Castor Fatty Acid - L Grade | Alnor Oil Company, Inc. | Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for us...Vea Mas Dehydrated Castor Fatty Acid is a high diene fatty acid. It is available with several levels of conjugation. Linolenic acid content is very low and Linoleic acid content is very high allowing for less yellowing in exterior environments. It is ideal for use in a wide range of applications. Vea Menos | |
| Denatonium Benzoate, 20% in EG | Chemceed | El benzoato de denatonio es un agente amargo que se usa para dar sabor amargo a los productos tóxicos para que estos sean más difíciles de ingerir. Entre los ejemplos de uso de benzoato de denatonio se encuentran los anticongelantes, detergentes, limpiado...Vea Mas El benzoato de denatonio es un agente amargo que se usa para dar sabor amargo a los productos tóxicos para que estos sean más difíciles de ingerir. Entre los ejemplos de uso de benzoato de denatonio se encuentran los anticongelantes, detergentes, limpiadores de pisos, removedores de pintura y limpiadores de retretes. Vea Menos | |
| Deuteron LE 100 LV Antistatic Agent | P.A.T. Products | Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing ...Vea Mas Deuteron LE 100 LV is an antistatic agent with an active content of 100%. It is free of solvents and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems. Deuteron LE 100 LV can be used in many applications including epoxy flooring, PUR-foams (the production of shoe-soles for example), UV or electron-beam curing screen inks to avoid electrostatic charge, and 3D printing. Deuteron LE 100 LV has a cationic character and an extremely high polarity. This allows for considerable reduction in electrical resistance even when using small quatities. Vea Menos | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...Vea Mas Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. Vea Menos | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...Vea Mas Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. Vea Menos | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...Vea Mas Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. Vea Menos | Request Sample |
| Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...Vea Mas Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. Vea Menos | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...Vea Mas Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. Vea Menos | Request Sample |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...Vea Mas Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. Vea Menos | Request Sample |
| Deuteron PMH C Thermoset Matting Agent | P.A.T. Products | Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption valu...Vea Mas Deuteron PMH C (compact) is a micronized, pure thermoset with a compact particle structure. Due to its excellent fineness the product can be used as a matting additive in many applications. Even in higher dosages, the products specific oil absorption value does not lead to a considerable increase in viscosity. Flexibility of the coating will be insignificantly effected by the use of Deuteron PMH C as matting agent. Being a thermoset, Deuteron PMH C increases the blocking stability of coatings in which the employed binder shows a tendency towards thermoplasticity. Deuteron PMH C is resistant to temperatures above 200 °C. Color fastness and weather resistance are excellent. The use in exterior applications is possible without limitations. The coatings are recoatable. Deuteron PMH C is wax-free. Deuteron PMH C can be used as a matting agent in aqueous and solvent based coating systems. A suitable matting agent combination can be created for solvent free, UV curing varnishes with the additional use of SiO2. With its favorable oil absorption value Deuteron PMH C is ideal for coatings with high flexibility like coil coatings and leather finishes. In powder coatings the presence of Deuteron PMH C can improve fluidity and spraying property of the powder coating. Vea Menos | Request Sample |
| Deuteron SO 100 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...Vea Mas Deuteron SO 100 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 100 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 100 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 100 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 100 can be combined with other organic matting agents, waxes and silicas. Vea Menos | Request Sample |
| Deuteron SO 300 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...Vea Mas Deuteron SO 300 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 300 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. Vea Menos | Request Sample |
| Deuteron SO 500 Matting and Soft-Feel Additive for UV Systems | P.A.T. Products | Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the...Vea Mas Deuteron SO 500 is a fine dispersion of an elastomer in reactive thinner. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 500 is resistant against solvents which are customary in the paint industry. It is temperature resistant up to 160 °C. The small particle size makes the product suitable for thin-film applications. Deuteron SO 500 contains no waxes and thus does not negatively affect the re-coatability. In conjunction with isocyanates, the inherent OH-functionality allows the product to be crosslinked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting. This product is suitable for all radically curing coatings, especially 100% UV-systems. Deuteron SO 500 is intended for coatings which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness and is largely independent of the layer thickness. Deuteron SO 500 can be combined with other organic matting agents, waxes and silicas. Vea Menos | Request Sample |
| Dibasic Ester | Henan Harvest Chem Co., LTD. | Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vesse...Vea Mas Dibasic Ester is a colorless, transparent liquid. This product provides leveling, saponification and hydrolyze properties. Dibasic Ester is used in coil steel coating, automobile coating, baking coating, tin plat printing coating, carpentry coating, vessel/can coating, metal furniture coating, insulating coating, printing ink and resin applications. Vea Menos | |
| Dibutyl Phthalate (DBP) | Chemceed | El dibutil ftalato (DBP) es un plastificante usado en aplicaciones tales como adhesivos, lacas y tintas de impresión. El dibutil ftalato se puede usar como plastificante secundario con otras ftalatos para compuestos de PVC altamente concentrados. | |
| Dimethyl Sebacate (DMS) | Chemceed | El dimetil sebacato (DMS) es un plastificante para resinas de nitrocelulosa, caucho y vinilo. El dimetil sebacato se usa en la producción de estabilizadores ligeros que se usan en revestimientos para proteger superficies y pigmentos contra la fotodegradac...Vea Mas El dimetil sebacato (DMS) es un plastificante para resinas de nitrocelulosa, caucho y vinilo. El dimetil sebacato se usa en la producción de estabilizadores ligeros que se usan en revestimientos para proteger superficies y pigmentos contra la fotodegradación mediante la desactivación de radicales libres. El dimetil sebacato también puede usarse como disolvente para resinas y cauchos. En tintas y revestimientos, el DMS puede suavizar aglutinantes para mejorar la flexibilidad. Vea Menos | |
| Dioctyl Sebacate (DOS) | Chemceed | El dioctil sebacato (DOS) es un plastificante libre de ftalatos usados para PVC, nitrocelulosas, resinas de estireno y cauchos sintéticos donde se requiere buen rendimiento a baja temperatura. Es soluble en hidrocarburos, alcoholes, ésteres, clorocarburos...Vea Mas El dioctil sebacato (DOS) es un plastificante libre de ftalatos usados para PVC, nitrocelulosas, resinas de estireno y cauchos sintéticos donde se requiere buen rendimiento a baja temperatura. Es soluble en hidrocarburos, alcoholes, ésteres, clorocarburos, éter, benceno y otros disolventes orgánicos. Se recomienda el DOS para uso en adhesivos y selladores. Vea Menos | |
| Dioctyl Terephthalate (DOTP) | Chemceed | El dioctil tereftalato (DOPT) es un plastificante de uso general y se puede usar como reemplazo del ftalato. Como plastificante de PVC, el DOPT se usa en fórmulas de tintas de impresión en pantallas. Además, el DOTP se puede aplicar en pinturas, lacas, ti...Vea Mas El dioctil tereftalato (DOPT) es un plastificante de uso general y se puede usar como reemplazo del ftalato. Como plastificante de PVC, el DOPT se usa en fórmulas de tintas de impresión en pantallas. Además, el DOTP se puede aplicar en pinturas, lacas, tintas, adhesivos y selladores. Vea Menos | |
| Dipropylene Glycol Monomethyl Ether | Jiangsu Ruijia Chemistry Co.,Ltd. | Dipropylene Glycol Monomethyl Ether is a colorless and transparent liquid. It can be used as a solvent in water-based paints and screen-printing inks. It can also be used as the coupling agent (often mix) of dilute aqueous coatings. | |
| DISPERBYK®-108 FOR INKS | BYK | It is a wetting and dispersing additive for solvent-borne printing inks. Applications include gravure inks, flexographic inks, and silk screen printing inks. | |
| DISPERBYK®-110 FOR INKS | BYK | A wetting and dispersing additive for aqueous and solvent-borne printing inks. Solution of a copolymer with acidic groups. | |
| DISPERBYK®-111 FOR INKS | BYK | A wetting and dispersing additive for aqueous and solvent-borne printing inks. Copolymer with acidic groups. | |
| DISPERBYK®-118 | BYK | DISPERBYK®-118 es un aditivo humectante y dispersante para sistemas a base de solventes para estabilizar dióxidos de titanio básico, neutral y acídico, pigmentos inorgánicos de colores, óxidos de hierro transparentes, rellenos y pigmentos de efecto. El ad...Vea Mas DISPERBYK®-118 es un aditivo humectante y dispersante para sistemas a base de solventes para estabilizar dióxidos de titanio básico, neutral y acídico, pigmentos inorgánicos de colores, óxidos de hierro transparentes, rellenos y pigmentos de efecto. El aditivo mejora la humectación y la dispersión de todos los rellenos inorgánicos tales como carbonato de calcio e hidróxido de aluminio (ATH). DISPERBYK®-118 es multipropósito para dióxidos de titanio. El aditivo causa una menor viscosidad y permite una mayor carga de relleno. Vea Menos | |
| DISPERBYK®-142 | BYK | Aditivo humectante y de dispersión de peso molecular alto para sistemas transmitidos por solvente. Solución de una sal fosfórica de éster de un copolímero de peso molecular alto con grupos afines al pigmento. | |
| DISPERBYK®-162 FOR INKS | BYK | A high molecular weight wetting and dispersing additive for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| DISPERBYK®-163 FOR INKS | BYK | A high molecular weight wetting and dispersing additive for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| DISPERBYK®-168 FOR INKS | BYK | High molecular weight wetting and dispersing additives for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| DISPERBYK-168 TF | BYK | DISPERBYK-168 TF is a wetting and dispersing additive for solvent-free, radiation curable coatings, printing inks and adhesives. DISPERBYK-168 TF is the tin-free variant of DISPERBYK-168 in GPTA. | |
| DISPERBYK®-180 FOR INKS | BYK | A wetting and dispersing additive for aqueous and solvent-borne printing inks. Alkylolammonium salt of a copolymer with acidic groups. | |
| DISPERBYK®-181 FOR INKS | BYK | A wetting additive for aqueous printing inks. Solution of an alkylolammonium salt of a polyfunctional polymer. | |
| DISPERBYK®-182 FOR INKS | BYK | High molecular weight wetting and dispersing additive for printing inks. Solution of a high molecular weight block copolymer with pigment affinic groups. | |
| DISPERBYK®-184 FOR INKS | BYK | High molecular weight wetting and dispersing additive aqueous and solvent-borne printing inks and pigment concentrates. Solutions of high molecular weight block copolymers with pigment affinic groups | |
| DISPERBYK®-190 FOR INKS | BYK | Hhigh molecular weight wetting and dispersing additive for aqueous and solvent-borne printing inks and pigment concentrates. Solutions of high molecular weight block copolymers with pigment affinic groups. | |
| DISPERBYK®-192 FOR INKS | BYK | A wetting and dispersing additive for aqueous printing inks and pigment concentrates. Copolymer with pigment affinic groups. | |
| DISPERBYK®-193 FOR INKS | BYK | It is a high molecular weight wetting and dispersing additive for resin based aqueous printing inks and pigment concentrates that is recommended for gravure inks, flexographic inks, and silk screen printing inks. | |
| DISPERBYK®-2001 | BYK | Aditivo humectante y de dispersión, de peso molecular alto, para sistemas transmitidos por solvente. Copolímero de bloque de acrilato modificado. | |
| DISPERBYK®-2012 | BYK | "DISPERBYK-2012 es adecuado para resinas y las resina sin rutinas. Este aditivo es compatible con una amplia gama de resinas solubles en agua, emulsiones y dispersiones. Este aditivo, de alto peso molecular, deflocula pigmentos a través de una estabilizac...Vea Mas "DISPERBYK-2012 es adecuado para resinas y las resina sin rutinas. Este aditivo es compatible con una amplia gama de resinas solubles en agua, emulsiones y dispersiones. Este aditivo, de alto peso molecular, deflocula pigmentos a través de una estabilización estérica del pigmento. Consecuentemente se mejoran, la fuerza de color, transparencia, brillo y la estabilidad de almacenamiento de los concentrados del pigmento. Vea Menos | |
| DISPERBYK-2014 | BYK | DISPERBYK-2014 is a 100% solvent-free wetting and dispersing additive for solvent-borne, solvent-free, aqueous and UV coatings, as well as for aqueous printing inks and inkjet inks. | |
| DISPERBYK®-2018 | BYK | DISPERBYK®-2018 is a VOC- and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, adhesives, and pigment concentrates. | |
| DISPERBYK®-2019 | BYK | DISPERBYK®-2019 is a VOC and solvent-free wetting and dispersing additive for aqueous paint systems, floor coatings, printing inks,inkjet inks, and pigment concentrates. | |
| DISPERBYK-2155 TF | BYK | DISPERBYK-2155 TF is a VOC- and solvent-free wetting and dispersing additive for solvent-borne and solvent-free coating systems, floor coatings, and printing inks. Particularly recommended for the manufacture of pigment concentrates with broad compatibili...Vea Mas DISPERBYK-2155 TF is a VOC- and solvent-free wetting and dispersing additive for solvent-borne and solvent-free coating systems, floor coatings, and printing inks. Particularly recommended for the manufacture of pigment concentrates with broad compatibility. The 100 % active substance makes it particularly suitable for high-solid and solvent-free systems. DISPERBYK-2155 TF is the tin-free variant of DISPERBYK-2155. Vea Menos | |
| DISPERBYK®-FOR INKS | BYK | A wetting additive for aqueous printing inks. Solution of an alkylolammonium salt of a lower molecular weight polycarboxylic acid polymer. | |
| Dispersion Agent BLK-9918 | BELIKE Chemical Co.,Ltd. | Dispersion Agent BLK-9918 is a coating additive that is in the form of a yellow or brown liquid. This product is most commonly used as a dispersion agent in water-based paint, inks, and water-based acrylic resins. | |
| DMAMP-80 | Univar Solutions | DMAMP-80 is one of the strongest tertiary amino alcohols commercially available, which can be used in water based systems to provide exceptional clarity, wettability and stability. | Request Sample |
| Dorkafill® H | BassTech International | Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) ...Vea Mas Dorkafill® H is a functional filler in paint, coatings, and inks. This product brings matting properties and viscosity alongside basic performance (brightness, opacity, hardness, etc) and often allows an increase of the pigment volume concentration (PVC) without a loss of quality. Vea Menos | |
| Dorkafill® Pro_Void | BassTech International | Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexib...Vea Mas Dorkafill® Pro_Void is a functional filler in paint, coatings, and inks. This product provides matting properties and scrub resistance which result in lower oil absorption (and thus a reduction in resin, advantages in dispersion, viscosity and more flexibility in fine tuning of the paint e.g. open time). Vea Menos | |
| Dow Corning® 1250 Surfactant | Univar Solutions | Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthe...Vea Mas Dow Corning® 1250 Surfactant is a silicone profoamer for mechanically frothing PVC dispersions. It may be used in plastisol formulations with large amounts of plasticizers to give homogeneous PVC foam coating, which is known to be one of the common synthetic leathers. Vea Menos | Request Sample |
| Dow Corning® 26 Additive | Univar Solutions | Dow Corning® 26 Additive is a leveling and wetting agent for solvent-based coatings and inks. It is a low-viscosity, 100% silicone fluid containing no solvents. | Request Sample |
| Dow Corning® 550 Fluid | Univar Solutions | Dow Corning® 550 Fluid is a trimethyl-terminated dimethyl, phenylmethyl siloxane fluid. It offers excellent heat transfer characteristics, good compressibility, and good oxidation and thermal stability. | Request Sample |
| DOWSIL™ 100F Additive | Dow Performance Silicones | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...Vea Mas Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. Vea Menos | |
| DOWSIL™ 100F Additive | Univar Solutions | Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborn...Vea Mas Dow Corning® 100F Additive is a foam control agent in solvent-based and radiation curable coatings. It gives efficient foam control at very low silicone addition levels, even in high solids coatings formulations. It shows good compatibility in solventborne and radiation curable coatings and has a low tendency to cause craters or impact gloss or clarity of the coating. Due to the low addition levels required, it does not cause issues with recoatability. Vea Menos | Request Sample |
| DOWSIL™ 11 Additive | Univar Solutions | Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coat...Vea Mas Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. Vea Menos | Request Sample |
| DOWSIL™ 163 Additive | Dow Performance Silicones | Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% activ...Vea Mas Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. Vea Menos | |
| DOWSIL™ 163 Additive | Univar Solutions | Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% activ...Vea Mas Dow Corning® 163 Additive is a foam control additive for solvent-based and UV coatings and solvent-based and water-based inks. It may be used in ink and coating formulations that are acceptable for food contact. This product is a low-viscosity, 100% active silicone antifoam compound containing no solvents. Vea Menos | Request Sample |
| DOWSIL™ 205SL Additive | Dow Performance Silicones | Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...Vea Mas Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. Vea Menos | |
| DOWSIL™ 205SL Additive | Univar Solutions | Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solvin...Vea Mas Dow Corning® 205SL Additive is an easy-to-use, high performance silicone polyether additive that gives excellent hand feel in multiple coating formulations at low addition levels. It also functions as an antifoam, bringing both enabling and problem solving benefits to the formulator and reducing the amount of additives required in the formulation. Vea Menos | Request Sample |
