| ACLYN 295-A | Univar Solutions | ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carri...Vea Mas ACLYN 295-A is a zinc ionomer of an EAA copolymer, in powdered form, is neutralized to 98%. Zinc can provide corrosion resistance. Used as a pigment dispersing agent for masterbatch in polar resin systems due to enhanced compatability with the resin carrier. Vea Menos | Request Sample |
| AQUACER® 513 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de las tintas de impresión acuosos. Emulsión no-iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AQUACER® 531 | BYK | Emulsión de cera, para mejorar las propiedades de superficie de pinturas y de tintas de impresión industriales, transmitidos por agua. Emulsión no-iónica basada en una cera modificada de polietileno. | |
| AQUACER® 552 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de la tintas de impresión, acuosos. Emulsión no iónica basada en una cera oxidada del polietileno de dispersión alta. | |
| AQUACER® 593 | BYK | Cera de emulsión para mejorar el anti-deslizamiento en los sistemas de pintura y de tintas de impresión transmitidos por agua. Emulsión no-iónica de una cera modificada de polipropileno. | |
| AQUAMAT® 263 | BYK | Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de la pintura y de las tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta. | |
| ASTORLITE® J50 (4636A) | The International Group, Inc. (IGI Wax) | ASTORLITE® J50 is a soft, white, opaque wax specially designed for jar / container candles. Its cohesive strength and low shrinkage allow it to adhere to the container. Jar / container candles can be made with a single filling with no top-off necessary. | |
| Carnauba Wax T1 | Carnauba do Brasil Ltda. | Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic,...Vea Mas Carnauba Wax T1 is a light yellow powder that originates from Olho's powder. It has an ash content of 0.05%, an acid value of 2 to 6 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. Vea Menos | |
| Carnauba Wax T3 | Carnauba do Brasil Ltda. | Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, a...Vea Mas Carnauba Wax T3 is a dark yellow powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 11 mg NaOH/g, and a maximum moisture percentage of 0.5%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. Vea Menos | |
| Carnauba Wax T4 Centrifuged | Carnauba do Brasil Ltda. | Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plas...Vea Mas Carnauba Wax T4 Centrifuged is a brown powder that originates from straw powder. It has an ash content of 0.5%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. Vea Menos | |
| Carnauba Wax T4 Filtered | Carnauba do Brasil Ltda. | Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic...Vea Mas Carnauba Wax T4 Filtered is a brown powder that originates from straw powder. It has an ash content of 0.3%, an acid value of 4 to 10 mg NaOH/g, and a maximum moisture percentage of 1.0%. This product is used in ink, photographic films, varnishes, plastic, and paper. It is also found in many types of polishes such as floor, vehicle, fruit, leather, and furniture. Vea Menos | |
| CERAFLOUR® 950 | BYK | Cera micronizada para mejorar las propiedades de superficie de lacas y de revestimientos en polvo UV-curados y sin solvente. Cera de polietileno, de alta densidad, modificada, micronizada. | |
| CERAFLOUR® 991 | BYK | Cera micronizada para mejorar las propiedades de superficie de los sistemas de pintura transmitidos por solvente y de los revestimientos en polvo.Cera de polietileno, micronizada. | |
| CeraSPERSE UV 636 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | EverGlide UV 636 es una emulsión al 25% de cera de carnaúba en TRPGDA para tintas y revestimientos UV. Brinda resistencia al deslizamiento y desgaste, mientras mantiene el brillo y la claridad. Presenta una cera con partículas de tamaño pequeño (2 a 3 mic...Vea Mas EverGlide UV 636 es una emulsión al 25% de cera de carnaúba en TRPGDA para tintas y revestimientos UV. Brinda resistencia al deslizamiento y desgaste, mientras mantiene el brillo y la claridad. Presenta una cera con partículas de tamaño pequeño (2 a 3 micrones) que la hacen ideal para muchas películas delgadas y transparentes. Este producto se proporciona como una suspensión estable y uniforme sin necesidad de añadir agentes tensioactivos o de dispersión. Se puede incorporar con una simple mezcla. Vea Menos | |
| CeraSPERSE UV 691 (Carnauba Wax UV Dispersion) | Shamrock Technologies, Inc. | CeraSPERSE UV 691 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CERETAN A 71 | Munzing Chemie | CERETAN A 71 is a erucamide wax that is a slightly yellow fine granule. It provides good antiblocking, slip, recoatability and wet print properties, defoaming action, surface lubrication and temperature stability. It is commonly used in printing inks. | |
| CERETAN A 73 | Munzing Chemie | CERETAN A 73 is a oleamide wax that is a slightly yellow fine granule. It provides good lubrication, releasing action, antiblocking, slip, and reduction of adhesion and is commonly used in printing inks, such as flexo and gravure inks. | |
| CERETAN MA 7150 | Munzing Chemie | CERETAN MA 7150 is a white fine powder that is a micronized erucamide wax. It is used as an anti-blocking agent, slip agent, defoamer, surface lubricant and has good recoatability and wet printing properties. It is commonly used in solvent based flexo ink...Vea Mas CERETAN MA 7150 is a white fine powder that is a micronized erucamide wax. It is used as an anti-blocking agent, slip agent, defoamer, surface lubricant and has good recoatability and wet printing properties. It is commonly used in solvent based flexo inks. Vea Menos | |
| CERETAN MA 7250 | Munzing Chemie | CERETAN MA 7250 is a white fine powder that is a micronized erucamide wax. It is used as an anti-blocking agent, slip agent, defoamer, surface lubricant and has good recoatability and wet printing properties. It is commonly used in solvent based flexo ink...Vea Mas CERETAN MA 7250 is a white fine powder that is a micronized erucamide wax. It is used as an anti-blocking agent, slip agent, defoamer, surface lubricant and has good recoatability and wet printing properties. It is commonly used in solvent based flexo inks and thermosensitive paper coatings. Vea Menos | |
| CERETAN ME 0825 | Munzing Chemie | CERETAN ME 0825 is a white fine powder that is a spherical, micronized non-polar polyethylene wax. It is used to improve rub resistance, scratch resistance, and provide good anti-blocking and dispersion. It is commonly used in powder, can, car, industrial...Vea Mas CERETAN ME 0825 is a white fine powder that is a spherical, micronized non-polar polyethylene wax. It is used to improve rub resistance, scratch resistance, and provide good anti-blocking and dispersion. It is commonly used in powder, can, car, industrial, building, furniture and floor coatings, as well as gravure, overprint, screen, flexo, heatset, sheetfed and coldset inks. Vea Menos | |
| CERETAN ME 0825 WD | Munzing Chemie | CERETAN ME 0825 WD is a white fine powder that is a spherical, micronized, surface-modified polyethylene wax. It is used to improve rub resistance, scratch resistance, and provide good anti-blocking. It is commonly used in can, industrial, building, furn...Vea Mas CERETAN ME 0825 WD is a white fine powder that is a spherical, micronized, surface-modified polyethylene wax. It is used to improve rub resistance, scratch resistance, and provide good anti-blocking. It is commonly used in can, industrial, building, furniture and floor coatings, as well as gravure, overprint, screen, flexo, heatset, sheetfed and coldset inks. Vea Menos | |
| CERETAN ME 0919 | Munzing Chemie | CERETAN ME 0919 is a white fine powder that is a micronized non-polar polyethylene wax. It has good abrasion, scratch resistance, high-melting and hard properties. It is commonly used in paints, printing inks, such as gravure and flexographic inks, and pa...Vea Mas CERETAN ME 0919 is a white fine powder that is a micronized non-polar polyethylene wax. It has good abrasion, scratch resistance, high-melting and hard properties. It is commonly used in paints, printing inks, such as gravure and flexographic inks, and paints and wood coatings. Vea Menos | |
| CERETAN ME 1620 | Munzing Chemie | CERETAN ME 1620 is a white fine powder that is a spherical, micronized non-polar polyethylene wax. It has high abrasion, scratch resistance, high-melting and hardness, anti-blocking, and good temperature stability. It is commonly used in printing inks and...Vea Mas CERETAN ME 1620 is a white fine powder that is a spherical, micronized non-polar polyethylene wax. It has high abrasion, scratch resistance, high-melting and hardness, anti-blocking, and good temperature stability. It is commonly used in printing inks and paints and coatings, such as powder coatings, industrial paints, furniture and hard wood floor finishes. Vea Menos | |
| CERETAN ME 1715 | Munzing Chemie | CERETAN ME 1715 is a white fine powder that is a spherical, micronized non-polar polyethylene wax. It has high abrasion, scratch resistance, high-melting and hardness, anti-blocking, and good temperature stability. It is commonly used in printing inks and...Vea Mas CERETAN ME 1715 is a white fine powder that is a spherical, micronized non-polar polyethylene wax. It has high abrasion, scratch resistance, high-melting and hardness, anti-blocking, and good temperature stability. It is commonly used in printing inks and paints and coatings, such as powder coatings, industrial paints, furniture and hard wood floor finishes. Vea Menos | |
| CERETAN MF 5108 | Munzing Chemie | CERETAN MF 5108 is a white fine powder that is a micronized polytetrafluoroethylene (PTFE). It has abrasion resistance, temperature stability and solvent resistance. It is commonly used in paints, powder, can, automotive, industrial, construction, furnitu...Vea Mas CERETAN MF 5108 is a white fine powder that is a micronized polytetrafluoroethylene (PTFE). It has abrasion resistance, temperature stability and solvent resistance. It is commonly used in paints, powder, can, automotive, industrial, construction, furniture, and parquet coatings, as well as gravure, overprint, flexo, heatset, and sheetfed inks. Vea Menos | |
| CERETAN MO 4715 | Munzing Chemie | CERETAN MO 4715 is a white fine powder that is a spherical, micronized, polar, polyethylene wax. It has good abrasion and scratch resistance, slip and anti-blocking properties, matting effect and has provides a soft feel effect. it is commonly used in wat...Vea Mas CERETAN MO 4715 is a white fine powder that is a spherical, micronized, polar, polyethylene wax. It has good abrasion and scratch resistance, slip and anti-blocking properties, matting effect and has provides a soft feel effect. it is commonly used in water-based paints and coatings, such as industrial paints, furniture and floor coatings, as well as printing inks, such as packaging and gravure inks. Vea Menos | |
| CERETAN MO 4920 | Munzing Chemie | CERETAN MO 4920 is a white fine powder that is a spherical, micronized oxidized fischer-tropsch wax. It has rub and scratch resistant, and slip and anti-blocking properties. It is commonly used in water-based paints and coatings, as well as printing inks,...Vea Mas CERETAN MO 4920 is a white fine powder that is a spherical, micronized oxidized fischer-tropsch wax. It has rub and scratch resistant, and slip and anti-blocking properties. It is commonly used in water-based paints and coatings, as well as printing inks, such as flexo and overprint inks. Vea Menos | |
| CERETAN MP 2120 | Munzing Chemie | CERETAN MP 2120 is a micronized polypropylene wax. It is a matting and slip agent, has scratch resistance and provides a soft feel effect. It is commonly used in paints and coatings, such as powder coatings, industrial paints, architectural, furniture and...Vea Mas CERETAN MP 2120 is a micronized polypropylene wax. It is a matting and slip agent, has scratch resistance and provides a soft feel effect. It is commonly used in paints and coatings, such as powder coatings, industrial paints, architectural, furniture and floor coatings, as well as gravure, overprint, screen printing and flexographic inks. Vea Menos | |
| CERETAN MPF 2520 D | Munzing Chemie | CERETAN MPF 2520 D is a white fine powder that is a micronized polypropylene wax, coated with PTFE. It has good scratch resistance, anti-blocking, matting and slipping agent properties, and repels water. It is commonly used in paints and coatings, such as...Vea Mas CERETAN MPF 2520 D is a white fine powder that is a micronized polypropylene wax, coated with PTFE. It has good scratch resistance, anti-blocking, matting and slipping agent properties, and repels water. It is commonly used in paints and coatings, such as powder, can, industrial, furniture and parquet coatings, as well as gravure, overprint, screen, flexo, heatset, sheetfed, and coldset inks. Vea Menos | |
| CERETAN MT 9120 | Munzing Chemie | CERETAN MT 9120 is a white fine powder that is a high melting, spherical, micronized fischer-tropsch wax. It has good scratch resistance and is a hydrophobic. It is commonly used for can, coil, auto, industrial, furniture and parquet coatings, as well as ...Vea Mas CERETAN MT 9120 is a white fine powder that is a high melting, spherical, micronized fischer-tropsch wax. It has good scratch resistance and is a hydrophobic. It is commonly used for can, coil, auto, industrial, furniture and parquet coatings, as well as gravure, overprint, screen, flexo, heatset, sheetfed and coldset inks. Vea Menos | |
| CERETAN MXF 9510 D | Munzing Chemie | CERETAN MXF 9510 D is a white fine powder that is a spherical, micronized functional blend, coated with PTFE. It has good abrasion and scratch resistance and provides good gloss. It is commonly used in sheetfed inks, flexo and gravure inks, as well as po...Vea Mas CERETAN MXF 9510 D is a white fine powder that is a spherical, micronized functional blend, coated with PTFE. It has good abrasion and scratch resistance and provides good gloss. It is commonly used in sheetfed inks, flexo and gravure inks, as well as powder, can, coil, auto, industrial, furniture and parquet coatings. Vea Menos | |
| CERETAN MXF 9820 D | Munzing Chemie | CERETAN MXF 9820 D is a white fine powder that is a spherical, micronized polyolefin wax, coated with PTFE. It has good abrasion and scratch resistance and provides good gloss. It is commonly used in printing inks, as well as powder, can, coil, auto, indu...Vea Mas CERETAN MXF 9820 D is a white fine powder that is a spherical, micronized polyolefin wax, coated with PTFE. It has good abrasion and scratch resistance and provides good gloss. It is commonly used in printing inks, as well as powder, can, coil, auto, industrial, furniture and parquet coatings. Vea Menos | |
| CERETAN P 21 | Munzing Chemie | CERETAN P 21 is a white powder that is a non-polar polypropylene wax. It has low viscosity, good dispersion and incorporation, matting effects, abrasion resistance, and lubricating properties. It is commonly used in printing inks, paints and coatings, and...Vea Mas CERETAN P 21 is a white powder that is a non-polar polypropylene wax. It has low viscosity, good dispersion and incorporation, matting effects, abrasion resistance, and lubricating properties. It is commonly used in printing inks, paints and coatings, and pigment concentrates. Vea Menos | |
| EVACOTE® 7089A | The International Group, Inc. (IGI Wax) | EVACOTE® 7089A is a specialty formulation of petroleum waxes and polymers suitable in consistency to be utilized as a sealant and coating for fertilizer applications. | |
| FluoroSLIP® 225 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 225 is a PTFE and low molecular weight micronized polyethylene wax blend. FluoroSLIP® 225 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 511 (PTFE / Polyethylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 511 is a PTFE (polytetrafluoroethylene) and polyethylene wax blend. FluoroSLIP® 511 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 605 (PTFE / Polytheylene Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 605 is a spherical polyethylene wax and PTFE blend. FluoroSLIP® 605 is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSLIP® 731MG (PTFE / Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 731MG is a PTFE (polytetrafluoroethylene), high melting polyethylene wax, and carnauba wax blend. FluoroSLIP® 731MG is recommended for offset inks in water-based, solvent-based and UV systems. | |
| FluoroSPERSE® 153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 153V is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 153V is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 6153V (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 6153V is a micronized PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 6153V is recommended for use in offset inks. | |
| FluoroSPERSE® 755 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 755 is a PTFE (polytetrafluoroethylene) dispersion in a universal lithographic system. FluoroSPERSE® 755 is recommended for offset and heat set lithographic inks. | |
| FluoroSPERSE® 7908 (PTFE Dispersion) | Shamrock Technologies, Inc. | FluoroSPERSE® 7908 is a PTFE (polytetrafluoroethylene) micropowder dispersion in a lithographic varnish. | |
| Hydrocer 257 (Polyethylene Wax Disperison) | Shamrock Technologies, Inc. | Hydrocer 257 is polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer 357 (Polyethylene Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 357 is a spherical polyethylene wax in a non-ionic aqueous dispersion recommended for water based ink systems. | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer DP-69 (Paraffin Wax Microdispersion) | Shamrock Technologies, Inc. | Hydrocer DP-69 is paraffin wax in an aqueous microdispersion recommended for water based ink systems. | |
| Hydrocer EE 95 (Polyethylene Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EE 95 is an anionic, high-density polyethylene wax emulsion. Hydrocer EE-95 is used in liquid inks for flexographic systems. | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. | Hydrocer EP 91 is an anionic aqueous paraffin wax emulsion. Hydrocer EP 91 is recommended for use in aqueous ink systems. | |
| Hydrocer ER 77 (Polypropylene Emulsion) | Shamrock Technologies, Inc. | Hydrocer ER 77 is a non-ionic APEO-free polypropylene emulsion recommended for use in liquid inks. | |
| IGI® 0431G | The International Group, Inc. (IGI Wax) | IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point. | |
| IGI® 1230A | The International Group, Inc. (IGI Wax) | IGI® 1230A is a fully refined paraffin wax. | |
| IGI® 1239A | The International Group, Inc. (IGI Wax) | IGI® 1239A is a fully refined wax with a mid-range melting point. | |
| IGI® 1250A | The International Group, Inc. (IGI Wax) | IGI® 1250A is a fully refined paraffin wax. | |
| IGI® 1260A | The International Group, Inc. (IGI Wax) | IGI® 1260A is a fully refined paraffin wax. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| IGI® 1303A | The International Group, Inc. (IGI Wax) | IGI® 1303A is a fully refined high-melt paraffin wax that is used in a variety of applications including: hot-melt adhesives, investment casting, rubber products and textiles. | |
| IGI® 2202A | The International Group, Inc. (IGI Wax) | IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination. | |
| IGI® 2251A | The International Group, Inc. (IGI Wax) | IGI® 2251A is a flexible physiotherapy wax. IGI® 2251A is a low melting wax that is totally transparent (clear) at 125°F (52°C). | |
| IGI® 2281A | The International Group, Inc. (IGI Wax) | IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as...Vea Mas IGI® 2281A is a specially selected grade of white crude scale wax possessing good flexibility as well as high gloss on air cooling. IGI® 2281A is ideal for use in container candles or as a coating wax for vegetables. The storage life of vegetables such as turnips is improved by prevention of loss of moisture, while appearance is enhanced for improved marketability. Because it maintains flexibility at refrigerated temperatures, chipping and cracking of the coating is minimized when compared to other waxes. Vea Menos | |
| IGI® 2288A | The International Group, Inc. (IGI Wax) | IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 228...Vea Mas IGI® 2288A is a refined scale wax designed for heat therapy of arthritic and related ailments. It has a low melting point to avoid discomfort on application, and solidifies to form a soft, flexible coating which is easily peeled from the skin. As IGI® 2288A solidifies, it continues to release heat to the treated area. Vea Menos | |
| IGI® 2289A | The International Group, Inc. (IGI Wax) | IGI® 2289A is a crude scale paraffin wax derived from petroleum. | |
| IGI® 6006A | The International Group, Inc. (IGI Wax) | IGI® 6006A is a specialty wax formulation for “one pour” container candles. | |
| IGI® 6027A | The International Group, Inc. (IGI Wax) | IGI® 6027A is a specialty formulation for container candles. | |
| IGI® 6028A | The International Group, Inc. (IGI Wax) | IGI® 6028A is a specialty formulation of vegetable derived waxes and petroleum derived waxes suitable in consistency to be used for the manufacture of pillar, votive and other molded candles. | |
| IGI® 6046A | The International Group, Inc. (IGI Wax) | IGI® 6046A is a specialty formulation for use in container candles. | |
| JONCRYL® WAX 120 | BASF Dispersions & Resins | Joncryl® WAX 120 is a small particle size, very low VOC paraffin/polyethylene wax emulsion designed for water shedding, heat release, and low COF with FDA acceptability. | |
| JONCRYL® WAX 26 | BASF Dispersions & Resins | Joncryl® WAX 26 is a 26% solids, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. | |
| JONCRYL® WAX 28 | BASF Dispersions & Resins | Joncryl® WAX 28 is a 35% solids polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings without significant loss of gloss often associated with polyethylene wax additions. | |
| JONCRYL® WAX 4 | BASF Dispersions & Resins | Highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water based ink formulations. Its unique composition results in very high rub and scuff resistance at low use levels. | |
| LUBA-print 934/G (ND) | Munzing Chemie | LUBA-print 934/G (ND) is a white polyethylene-wax/PTFE wax dispersion additive for paints and printing inks. It is used in can coatings to improve slip property and mar resistance of thin films. | |
| MICROSERE® 5788A | The International Group, Inc. (IGI Wax) | MICROSERE® 5788A is a unique, low-melt microcrystalline wax that is used in a variety of applications including paper packaging and candles. | |
| MICROSERE® 5806A | The International Group, Inc. (IGI Wax) | MICROSERE® 5806A is a high-melt, amber colored microcrystalline that is used in a variety of applications. | |
| MICROSERE® 5871A | The International Group, Inc. (IGI Wax) | MICROSERE® 5871A is a light colored, high-melt, microcrystalline wax that is used in a variety of applications. | |
| MICROSERE® 5890A | The International Group, Inc. (IGI Wax) | MICROSERE® 5890A is a white, high-melt, microcrystalline wax that is used in a variety of applications. MICROSERE® 5890A complies with the requirements for “Microcrystalline Wax” set by the United States Pharmacopeia (USP) / National Formulary (NF). | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. | |
| Miraglaze™ 2540 A | Lawter | Miraglaze™ 2540 A is a sheet-fed overprint varnish that has good "stay open" and press stability properties on the press, essential during interrupted press runs. It has driers and waxes that are either dry trapped or wet. The benefits of Miraglaze™ 2540 ...Vea Mas Miraglaze™ 2540 A is a sheet-fed overprint varnish that has good "stay open" and press stability properties on the press, essential during interrupted press runs. It has driers and waxes that are either dry trapped or wet. The benefits of Miraglaze™ 2540 A are its tack stability, "stay open" properties and free-flow ability. Applications include overprints, specifically wet and dry traps and non-imprintable systems. Vea Menos | |
| Miraglaze™ 8614 A | Lawter | Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with...Vea Mas Miraglaze™ 8614 A is a workhorse sheet-fed overprint varnish made for good tack stability and maximum hardness. It comes as a dry-trapped or wet product that is ideal for commercial and folding carton applications. The product has a high gloss finish with minimal yellow and good rub characteristics. It also has ink driers and wax to enhance the formation of necessary print properties, making it suitable for use in overprints and wet or dry trapped applications. Vea Menos | |
| Neptune 1-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptuno 1 N1 es una cera polietileno de peso molecular mediano. Proporciona deslizamiento excelente, así como buen desgaste, abrasión y resistencia al rayado de uña. Es muy estable en la formulación y ayuda a evitar la falta de despumador. | |
| Neptune 1-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 1-N5 is a water dispersible grade of polyethylene wax showing melting peaks ranging from 93 – 106°C. Neptune 1-N5 is recommended for water based inks. | |
| Neptune 5223 (Polyethylene Wax) | Shamrock Technologies, Inc. | Neptune 5223 is a polyethylene wax that has been oxidized to provide water wettability and has a uniform melting range peaking at 97°C. Neptune 5223 is recommended for water based liquid and UV inks. | |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| PARAFFLEX® 4797A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard. | |
| PETROFIBE® 0251A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0251A is a mixture of soft petroleum waxes. | |
| Polysperse™ A | Lawter | Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resista...Vea Mas Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resistance and gloss. Polysperse™ A is suitable for use in flexographic and gravure inks, heatset and sheet-fed inks and in UV and metal decorating inks. Vea Menos | |
| PowderTEX 94 (PTFE Powder) | Shamrock Technologies, Inc. | PowderTEX 94 is a PTFE (polytetrafluoroethylene) texturing powder that has been treated with a higher surface area inert spacer to facilitate ease of handling. | |
| S-232-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-232 N1 es una aleación micronizada de cera de polietileno-carnaúba. Es una cera ideal para mantener el brillo y claridad en acabados claros, ofreciendo una resistencia excelente al deslizamiento y abrasión. S-232 N1 presenta una solubilidad limitada, di...Vea Mas S-232 N1 es una aleación micronizada de cera de polietileno-carnaúba. Es una cera ideal para mantener el brillo y claridad en acabados claros, ofreciendo una resistencia excelente al deslizamiento y abrasión. S-232 N1 presenta una solubilidad limitada, distribución reducida, compatibilidad con PTFE para mayor deslizamiento y fácil dispersión. Vea Menos | |
| S-256-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | S-256-N1 is a carnauba and polyethylene wax alloy showing melting peaks ranging from 95 – 113°C. S-256-N1 is recommended for use in water based inks. | |
| S-379-H (Polyethylene Wax) | Shamrock Technologies, Inc. | S-379-H is polyethylene wax with a DSC peak melt around 100°C and corresponding low onset of melting. S-379-H is recommended for liquid and paste inks. | |
| S-381-N1 (Carnauba / Polyethylene Wax Alloy) | Shamrock Technologies, Inc. | Una aleación de polietileno micronizado de cera. Se pueden mezclar con capas para producir acabados satinados o mates con excelente deslizamiento y resistencia a la abrasión. Se puede utilizar como un agente mateante que exhiben una mayor resistencia al ...Vea Mas Una aleación de polietileno micronizado de cera. Se pueden mezclar con capas para producir acabados satinados o mates con excelente deslizamiento y resistencia a la abrasión. Se puede utilizar como un agente mateante que exhiben una mayor resistencia al bruñido. Vea Menos | |
| S-390-C (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-390-C is a spherical polyethylene wax with a DSC peak melt above 100°C and corresponding low onset of melting. S-390-C is recommended for liquid and paste inks. | |
| S-394-N1 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N1 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N1 is recommended for liquid and paste inks. | |
| S-394-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-N5 is a polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-N5 is recommended for liquid and paste inks. | |
| S-394-SD4 (Spherical Polyethylene Wax) | Shamrock Technologies, Inc. | S-394-SD4 is a spherical polyethylene wax with a DSC melt peak above 110°C and good onset of melting. S-394-SD4 is recommended for liquid and paste inks. | |
| S-395-N5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-N5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-N5 is recommended for liquid and paste inks. | |
| S-395-SP5 (Polyethylene Wax) | Shamrock Technologies, Inc. | S-395-SP5 is a polyethylene wax with a DSC melt peak above 120°C, good crystallinity and high onset of melt. S-395-SP5 is recommended for liquid and paste inks. |
