| Coadis™ 144 A | Arkema Rheology & Specialty Additives | Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized...Vea Mas Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized gloss potentien which providing ideal viscosity, flow and wet adhesion from flat to high gloss systems. Vea Menos | |
| Unithane IC-555 NF | Union Specialties, Inc. | Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is often designed for use in a formulated primer coat for concrete, graphic arts, adhesives, primer...Vea Mas Unithane IC-555 NF is a NMP Free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 82 and a viscosity at 25°C of 1-500cps. It is often designed for use in a formulated primer coat for concrete, graphic arts, adhesives, primers, and automotive coatings. Vea Menos | |
| Unithane IC-950 NF | Union Specialties, Inc. | Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps. It is specifically designed for use in a formulated primer...Vea Mas Unithane IC-950 NF is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with exceptional adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 80 and a viscosity at 25°C of 10-500cps. It is specifically designed for use in a formulated primer coat for concrete, graphic arts, automotive, metal, adhesives, and paints. Vea Menos | |
| Unithane IC-953 CP | Union Specialties, Inc. | Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed for use in a formulated primer...Vea Mas Unithane IC-953 CP is a NMP free, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion that has extremely good adhesion to concrete properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 50-500cps. It is designed for use in a formulated primer coat for concrete, automotive, metal, graphic arts, adhesives, and flooring coatings. Vea Menos | |
| Unithane IC-901 | Union Specialties, Inc. | Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It is suitable for use in a formulated primer...Vea Mas Unithane IC-901 is a NMP containing, soft, low VOC, high gloss, APEO free, water-based polyurethane dispersion with good adhesion, flexibility, and automotive grade properties. This product has a gloss at 60º of 75 and a viscosity at 25°C of 10-200cps. It is suitable for use in a formulated primer coat for concrete, graphic arts, adhesives, and exterior coatings. Vea Menos | |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...Vea Mas HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. Vea Menos | Request Sample |
| Nubirox 213 in WB 2K Epoxy Primer (Formulation #EPPAA 19031) | Ferro Pigments | This WB 2K Epoxy Primer features Nubifer Y-5028, Nubifer NB-5970, and Nubirox 213. | |
| Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...Vea Mas Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. Vea Menos | Request Sample |
| Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...Vea Mas Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. Vea Menos | |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primer...Vea Mas HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. Vea Menos | Request Sample |
| AKTIFIT PF 115 | Hoffmann Mineral | AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the sil...Vea Mas AKTIFIT PF 115 is an activated SILFIT Z 91, produced by modifying the surface with a special amino functional silane. The by-products split off during the treatment reac-tion are largely removed during the production process which firmly at-taches the silane to the filler sur-face. This helps minimize undesira-ble side effects, as they are poten-tially encountered with in situ mix-ing (direct addition of silane to the compound). Vea Menos | |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...Vea Mas HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer...Vea Mas HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. Vea Menos | Request Sample |
| Picassian® AC-126 | Stahl Polymers | Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glo...Vea Mas Picassian® AC-126 is a waterbased, anionic, styrene-acrylic copolymer emulsion agent that is used as an anticorrosive primer on concrete flooring, sport floors, roofing porous tiles as well as being used as an universal decorative primers. It provides glossy, hard, and transparent films once coalesced. This product has good water resistance, humidity resistance, adhesion, corrosion resistance, blister resistance, and mechanical properties. It also has good compatibility with other binders such as acrylics and polyurethanes. Vea Menos | |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...Vea Mas HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. Vea Menos | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer...Vea Mas HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. Vea Menos | Request Sample |
| Methyltriethoxysilane | Zhejiang Wynca Chemical Industry Group | Methyltriethoxysilane is a colorless clear liquid used as a water repellant and primer for hard coating of plastic and synthesis for cross-linked resin. | |
| Nubirox 302 | Ferro Pigments | El Nubirox 302 es un pigmento anticorrosivo blanco de zinc sin etiquetado. Es un fosfosilicato de calcio y estroncio con mejores propiedades humectantes, mejor rendimiento y compatibilidad con otros aglutinantes en sistemas a base de disolvente y a base d...Vea Mas El Nubirox 302 es un pigmento anticorrosivo blanco de zinc sin etiquetado. Es un fosfosilicato de calcio y estroncio con mejores propiedades humectantes, mejor rendimiento y compatibilidad con otros aglutinantes en sistemas a base de disolvente y a base de agua. Vea Menos | |
| Nubirox 106 | Ferro Pigments | El Nubirox 106 es un pigmento anticorrosivo blanco sin etiquetado. Es un fosfato y molibdato de zinc organofilizado que se caracteriza por su excelente desempeño y rentabilidad en sistemas a base de disolvente y agua, por lo que es apto para aplicaciones ...Vea Mas El Nubirox 106 es un pigmento anticorrosivo blanco sin etiquetado. Es un fosfato y molibdato de zinc organofilizado que se caracteriza por su excelente desempeño y rentabilidad en sistemas a base de disolvente y agua, por lo que es apto para aplicaciones de película fina, como los revestimientos para bobinas. Vea Menos | |
| Nubirox FR-10 | Ferro Pigments | El Nubirox FR-10 es un inhibidor líquido a base de nitrito para evitar la oxidación inmediata de los sistemas a base de agua sin afectar negativamente el rendimiento anticorrosión a largo plazo del revestimiento. Es eficaz en concentraciones muy bajas y m...Vea Mas El Nubirox FR-10 es un inhibidor líquido a base de nitrito para evitar la oxidación inmediata de los sistemas a base de agua sin afectar negativamente el rendimiento anticorrosión a largo plazo del revestimiento. Es eficaz en concentraciones muy bajas y muestra actividad en las fases de vapor y líquida. Vea Menos | |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...Vea Mas HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. Vea Menos | Request Sample |
| TEGO® Wet 270 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 270 es un aditivo de humectación de sustratos altamente eficaz. Es un copolímero de siloxano poliéter líquido transparente con un excelente efecto anticráter que promueve el flujo en formulaciones a base de agua, a base de solvente y de curado p...Vea Mas TEGO® Wet 270 es un aditivo de humectación de sustratos altamente eficaz. Es un copolímero de siloxano poliéter líquido transparente con un excelente efecto anticráter que promueve el flujo en formulaciones a base de agua, a base de solvente y de curado por radiación. TEGO® Wet 270 es adecuado para revestimientos transparentes, de curado por radiación, pigmentados y en sistemas a base de agua. Puede utilizarse en imprimaciones o capas base y capas de protección en revestimientos de laca. Se recomienda que el agregado de este producto en revestimientos se realice en la fase de bajada y como se suministra. Vea Menos | Request Sample |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primer...Vea Mas HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. Vea Menos | Request Sample |
| Amirez 148/024 | Incorez Ltd. | Agente endurecedor de poliamina de aducción reactiva para resinas de epoxi. Mediante una reacción química, reticulará los epóxidos para producir polímeros durables de alta resistencia. | |
| TEGO® Wet 251 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 251 es un aditivo universal para la humectación de sustratos. Es un copolímero de siloxano poliéter líquido. Este producto es adecuado para revestimientos transparentes, pigmentados y sistemas a base de agua. TEGO® Wet 251 puede utilizarse en im...Vea Mas TEGO® Wet 251 es un aditivo universal para la humectación de sustratos. Es un copolímero de siloxano poliéter líquido. Este producto es adecuado para revestimientos transparentes, pigmentados y sistemas a base de agua. TEGO® Wet 251 puede utilizarse en imprimaciones o capas bases y revestimientos de acabado en revestimientos de laca. El agregado de este producto en revestimientos puede realizarse como se suministra o prediluido. Vea Menos | Request Sample |
| Loxanol® MI 6730 | BASF Formulation Additives | Loxanol® MI 6730 es una solución acuosa de polímero catiónico que se usa como imprimador en aplicaciones de revestimiento, donde mejora la adherencia al sustrato. Especialmente en los sistemas curados con UV, que a menudo presentan una mala adherencia deb...Vea Mas Loxanol® MI 6730 es una solución acuosa de polímero catiónico que se usa como imprimador en aplicaciones de revestimiento, donde mejora la adherencia al sustrato. Especialmente en los sistemas curados con UV, que a menudo presentan una mala adherencia debido a la pérdida de volumen, se pueden obtener considerables mejoras usando Loxanol® MI 6730 como imprimador. Vea Menos | |
| Dynasylan® HYDROSIL 2627 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2627 brinda al productor de materiales laminados de alto rendimiento un promotor de la adherencia entre materiales inorgánicos (por ejemplo vidrio, metales y masillas) y polímeros orgánicos (materiales termoestables, termoplásticos y e...Vea Mas Dynasylan® HYDROSIL 2627 brinda al productor de materiales laminados de alto rendimiento un promotor de la adherencia entre materiales inorgánicos (por ejemplo vidrio, metales y masillas) y polímeros orgánicos (materiales termoestables, termoplásticos y elastómeros). Dynasylan® HYDROSIL 2627 es un líquido entre transparente y levemente amarillento. Disolviéndolo con silanos organofuncionales convencionales se obtienen las siguientes ventajas: aumento de la confiabilidad del producto y del procesamiento; no liberación de constituyentes orgánicos inflamables, punto de inflamación > 100 °C; flexibilidad del proceso, ventajas de aplicación y protección ambiental. Vea Menos | |
| LYNDCOAT BR 1623 RTU | Elkem Silicones | LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. Lyndcoat BR 1623 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. Lyndcoat BR 1623 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as Lyndcoat XR 3900 Primer...Vea Mas LYNDCOAT BR 1623 RTU is a ready to use, silicone based, medium mica content release coating for butyl rubber bladders typically used in tire curing presses. It is an aqueous system that cures during the tire vulcanization process to a tightly bound coating that offers excellent release properties and lubricity. In addition, the product promotes air bleed and reduces defects caused by trapped air and buckled bladders. Lyndcoat BR 1623 RTU replaces conventional lining cements and solvent based band ply lubricants, eliminating the flammability and toxicityproblems associated with these kinds of products. Lyndcoat BR 1623 RTU is easy to use and is recommended for a single release application. It can be brushed, swabbed or sprayed onto the rubber surface. For maximum release and bladder life, the use of a durable bladder pre-treatment, such as Lyndcoat XR 3900 Primer, is highly recommended. Vea Menos | |
| Bayhydrol® A 2809 XP | Covestro | Bayhydrol® A 2809 XP es una dispersión poliacrílica hidroxifuncional reducible en agua que se puede utilizar en combinación con poliisocianatos alifáticos para la formulación de lacas transparentes, acabados, imprimadores y materiales de relleno acuosos d...Vea Mas Bayhydrol® A 2809 XP es una dispersión poliacrílica hidroxifuncional reducible en agua que se puede utilizar en combinación con poliisocianatos alifáticos para la formulación de lacas transparentes, acabados, imprimadores y materiales de relleno acuosos de dos componentes, para aplicaciones de acabado de transporte, revestimientos industriales y usos en plásticos y madera. Vea Menos | |
| Nubifer Y-5028 | Ferro Pigments | El Nubifer Y-5028 es un óxido de hierro amarillo micronizado fabricado mediante un proceso especial que reduce la presencia de aglomerados, lo que aporta mayor dispersabilidad, reproducibilidad del color y brillo. La superficie tiene un tratamiento especi...Vea Mas El Nubifer Y-5028 es un óxido de hierro amarillo micronizado fabricado mediante un proceso especial que reduce la presencia de aglomerados, lo que aporta mayor dispersabilidad, reproducibilidad del color y brillo. La superficie tiene un tratamiento especial que brinda un mejor comportamiento reológico en las pastas a base de agua concentradas. Vea Menos | |
| KLX 7997 | Nokxeller Quimica Ltda | KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer...Vea Mas KLX 7997 is a versatile polyether based aromatic isocyanate anionic dispersion for high tack formulations. It has a very soft and flexible film that can be used as a high initial and final bond strength and heat resistance. Typical applications are for modifying pressure sensitive textile & construction adhesives, neoprene, EVA and other plastic & leather primer applications. Once crosslinked shows outstanding water resistance. Vea Menos | |
| Epokukdo KEM-128M | Kukdo Chemical Co., Ltd. | Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and water dispersible curing agent like KH-723 are applied for water thinned two pack coatings, coal tar modified paint and primer...Vea Mas Epokukdo KEM -128M is a emulsible epoxy resin which can be easily emulsified by adding water slowly with a high speed stirrer. KEM-128M is available for combination with water dispersible curing agent such as, Docure KH-723, KH-721 and so on. KEM-128M and water dispersible curing agent like KH-723 are applied for water thinned two pack coatings, coal tar modified paint and primer for steel, concrete, and other nonmetallic substrates. It is also applied for decorative wall, structural grouting, adhesives and mortar in order to improve adhesive property and physical properties of cement by adding 10-20wt% epoxy resin emulsion. Vea Menos | |
| Drewplus™ S-4386 Foam Control Agent | Ashland | Drewplus® S-4386 agente de control de espuma es una emulsión acuosa no iónica de derivados de sílice, siliconas y tensioactivos. Está formulado para usarse en revestimientos a base de agua, tintas de impresión, artes gráficas, revestimientos de madera y p...Vea Mas Drewplus® S-4386 agente de control de espuma es una emulsión acuosa no iónica de derivados de sílice, siliconas y tensioactivos. Está formulado para usarse en revestimientos a base de agua, tintas de impresión, artes gráficas, revestimientos de madera y pinturas decorativas de alto brillo. Es un agente de control de espuma altamente eficiente con rápido desempeño y persistencia y compatibilidad excelentes. Vea Menos | |
| ADDAPT® SilStab L 50 | ADDAPT Chemicals BV | ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be ad...Vea Mas ADDAPT® SilStab L 50 is a solvent-free, stabilized potassium silicate solution for coatings and plasters. It can be used as a primer on masonry surfaces and for anti-corrosion on ferrous metals. This product is soluble in water, non-foaming, and can be added to coatings without causing coagulation. Vea Menos | |
| Dynol™ 604 Surfactant | Evonik Operations GmbH, BL Coating Additives | Agente humectante de bajo-COV (Conponente Organico Volatil), baja espuma , no iónico; ideal para aplicaciones de alto rendimiento transmitidas por el agua. Este agente humectante tiene la habilidad de reducir tanto el equilibrio como la tensión dinamica ...Vea Mas Agente humectante de bajo-COV (Conponente Organico Volatil), baja espuma , no iónico; ideal para aplicaciones de alto rendimiento transmitidas por el agua. Este agente humectante tiene la habilidad de reducir tanto el equilibrio como la tensión dinamica de superficie a un grado que no se da en otros surfactantes.Liquido 100 % activo. Vea Menos | Request Sample |
| Bayhydrol® U 241 | Covestro | Una dispersión de poliéster de poliuretano utilizada en la formulación de revestimientos industriales secados al horno, superficies de imprimadores automotrices de secado al horno e imprimadores y acabados de poliuretano de dos componentes para plásticos. | |
| TEGO® Wet 280 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 280 es un aditivo de humectación de sustratos altamente eficaz con buena promoción del flujo. Es un copolímero de siloxano de poliéter líquido, transparente, con buena compatibilidad y buena atomización en aplicaciones de pulverización en formul...Vea Mas TEGO® Wet 280 es un aditivo de humectación de sustratos altamente eficaz con buena promoción del flujo. Es un copolímero de siloxano de poliéter líquido, transparente, con buena compatibilidad y buena atomización en aplicaciones de pulverización en formulaciones que contienen solventes. TEGO® Wet 280 es adecuado para revestimientos transparentes, pigmentados y sistemas a base de agua. Puede utilizarse en imprimaciones o capas bases y en revestimientos de acabado para revestimientos de laca. Se recomienda agregar TEGO® Wet 280 en la fase de bajada como se suministra. Vea Menos | Request Sample |
| TEGO® Wet 510 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 510 es un aditivo de humectación de sustratos con excelente promoción del flujo. Es un surfactante orgánico líquido, no iónico, altamente dinámico, con baja espuma y sin silicona. TEGO® Wet 510 es de aplicación universal y ofrece buena reducción...Vea Mas TEGO® Wet 510 es un aditivo de humectación de sustratos con excelente promoción del flujo. Es un surfactante orgánico líquido, no iónico, altamente dinámico, con baja espuma y sin silicona. TEGO® Wet 510 es de aplicación universal y ofrece buena reducción de la tensión superficial dinámica. Es conveniente para sistemas a base de agua, transparentes y pigmentados. Se utiliza en imprimaciones o capas base y en capas de protección de revestimientos de laca. Se recomienda agregar este producto tal como se suministra en la fase de bajada. Vea Menos | Request Sample |
| DAOTAN® TW 6495/35WA | Allnex | DAOTAN® TW 6495/35WA is a waterborne, aliphatic polyurethane dispersion, free of solvents and emulsifiers. Dried at elevated temperature it provides transparent, crack-free films. It is recommended for waterborne plastic primers and basecoats. | Request Sample |
| DAOTAN® TW 6490/35WA | Allnex | Es una dispersión alifática de poliuretano transmitida por agua y sin solvente. | Request Sample |
| Aqueous Aminoalkyl Silicone Solutions | Dalian Onichem Co., Ltd. | Las soluciones acuosas de silicona aminoalquil se utilizan para revestimientos a base de agua, adhesivos, selladores e imprimadores. | Request Sample |
| BYD2640 | Tianyi Chemical Engineering Material Co., Ltd. | BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0...Vea Mas BYD2640, in the form of a waterborne, white anionic emulsion, is an acrylic copolymer that can be used in waterborne anti-corrosive primers for metal substrates. This product is resistant to yellowing, alkaline substrates, and water. Its pH value is 8.0 +/- 1.0. Vea Menos | |
| TEGO® Phobe 6510 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 6510 is a formulation of a polysiloxane resin / silane-blend for waterborne impregnations and primers. | Request Sample |
| AKTISIL AM | Hoffmann Mineral | AKTISIL AM es un SILLITIN Z 86 activado producido por la modificación de las superficies con silano amino funcional. Se utiliza como aditivo funcional, solo o en combinación con diluyentes o agentes de mateado. | |
| BYD6008 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6008, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it attaches to layers well. It is non toxic and the end product will have a high gloss. | |
| BYD6009 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6009, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it attaches to layers well. It is non toxic and the end product will have a high gloss. | |
| AKTIFIT AM | Hoffmann Mineral | AKTIFIT AM es un SILFIT Z 91 activado producido por la modificación de las superficies con silano amino funcional. Se utiliza como aditivo funcional, solo o en combinación con diluyentes o agentes de mateado. Se obtiene un efecto óptimo en elastómeros pol...Vea Mas AKTIFIT AM es un SILFIT Z 91 activado producido por la modificación de las superficies con silano amino funcional. Se utiliza como aditivo funcional, solo o en combinación con diluyentes o agentes de mateado. Se obtiene un efecto óptimo en elastómeros polares en combinación con azufre o donantes de azufre, amina o sistemas de reticulación bisfenólicos. Puede utilizarse siempre que la alta resistencia a la tracción y el módulo elevado, combinados con muy baja resistencia a la tracción y la deformación por compresión, sean tan importantes como las excelentes propiedades de procesamiento y extrusión. Vea Menos | |
| BYD6010 | Tianyi Chemical Engineering Material Co., Ltd. | BYD6010, in the form of a liquid emulsion, is a waterborne UV-curing resin that can be used in wood primers and inks. This product has a rapid cure and it wets underlying substrates well. It is non toxic and the end product will have a high gloss. | |
| Bayhydrol® A 2846 XP | Covestro | Bayhydrol® A 2846 XP es una dispersión de poliacrilato hidroxifuncional autorreticulante. Se utiliza como un aglutinante para la formulación de imprimadores y acabados a base de agua de uno y dos componentes. | |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer...Vea Mas EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. Vea Menos | |
| Bayhydrol® A 2427 | Covestro | Una dispersión hidroxifuncional poliacrílica acuosa utilizada en la formulación de acabados e imprimadores de poliuretano de secado rápido, a base de agua, de dos componentes, así como revestimientos de un componente. | |
| RESYDROL® AX 246w/70BG | Allnex | Resydrol® AX 246W/70BG es una resina alquídica sin secado de resina epoxi modificada, después de la neutralización con aminas diluibles en agua. Se utiliza para imprimadores de inmersión y por pulverización resistentes a la corrosión a base de agua con se...Vea Mas Resydrol® AX 246W/70BG es una resina alquídica sin secado de resina epoxi modificada, después de la neutralización con aminas diluibles en agua. Se utiliza para imprimadores de inmersión y por pulverización resistentes a la corrosión a base de agua con secado a bajas temperaturas. También se utiliza para acabados de una sola capa de alta calidad a base de agua para aplicaciones industriales. Vea Menos | Request Sample |
| RESYDROL® AX 247w/70BGMP | Allnex | Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-gra...Vea Mas Resydrol® AX 247W/70BGMP is an epoxy resin-modified non-drying alkyd resin, after neutralization with amines water-thinnable. It is used for waterborne corrosion-resistant dipping and spray primers for low stoving temperatures. It's also used for high-grade waterborne single-coat finishes for industrial applications. Vea Menos | Request Sample |
| LIOCRYL AM 432 | Synthopol Chemie Germany | LIOCRYL AM 432 es una emulsión acrílica pura acuosa, sin contenido de solvente ni plastificante con un tamaño de partícula fino. Es especialmente adecuada para las formulaciones de revestimientos imprimadores con buena adhesión humectante. Es una emulsión...Vea Mas LIOCRYL AM 432 es una emulsión acrílica pura acuosa, sin contenido de solvente ni plastificante con un tamaño de partícula fino. Es especialmente adecuada para las formulaciones de revestimientos imprimadores con buena adhesión humectante. Es una emulsión acrílica pura para usar en pinturas pigmentadas para interiores y exteriores mate y sedosas. El aglutinante puede usarse como una superficie de adherencia para sustratos que son difíciles de humectar (azulejos terrazzo), por sí mismos o mezclados con cemento. Es estable en álcali y muestra estabilidad aumentada en agua y muy buena adhesión humectante. Posee estabilidad de corte y buena adhesión de estampa. Las películas del aglutinante consolidadas completamente muestran buena resistencia a la tracción y elasticidad. Vea Menos | |
| BYD-1014 | Tianyi Chemical Engineering Material Co., Ltd. | BYD-1014, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne decorative paints, plastic paints, and primers for furniture. This product resists scratching well. There is no afte...Vea Mas BYD-1014, in the form of a translucent blue liquid without mechanical impurities, is a polyurethane resin that can be used in waterborne decorative paints, plastic paints, and primers for furniture. This product resists scratching well. There is no after-tack with this product under high temperature conditions. Vea Menos | |
| Anquamine® 419 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 c...Vea Mas Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primers, white gloss enamels and clear coats. It can be used with different solid epoxy resin dispersions depending upon the properties desired. Vea Menos | Request Sample |
| Hydrorene 33 | S.A.P.I.C.I. SpA | Hydrorene 33 is a water-dispersible isocyanate. This product has good chemical and abrasion resistance. It can be used in acrylic and polyurethane waterborne systems, in order to create high gloss topcoats or 2K waterborne varnishes. | |
| MAINCOTE™ HG-54D | Univar Solutions | MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial mainten...Vea Mas MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial maintenance markets. Vea Menos | |
| HEUCOPHOS® ZMP | Heucotech Ltd./Heubach | HEUCOPHOS® ZMP es un hidrato ortofosfato de zinc y molibdeno básico. La aplicación de este pigmento anticorrosivo proporciona excelentes resultados en sistemas de revestimiento a base de agua con poliuretanos de un solo componente. Este producto tiene un ...Vea Mas HEUCOPHOS® ZMP es un hidrato ortofosfato de zinc y molibdeno básico. La aplicación de este pigmento anticorrosivo proporciona excelentes resultados en sistemas de revestimiento a base de agua con poliuretanos de un solo componente. Este producto tiene un nivel de pH de 5,5 a 7,5, una densidad de 4,0 g/cm^3 y una conductividad máx. de 250 μS/cm. Vea Menos | Request Sample |
| BYD7630 | Tianyi Chemical Engineering Material Co., Ltd. | BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, press...Vea Mas BYD7630, in the form of a white, waterborne anionic emulsion, is a vinyl acetate copolymer that functions as a universal binder for applications such as interior and exterior wall coatings, metal surface coatings, primers, textiles, heat insulation, pressure sensitive tape, and more. This product offers strong cohesive strength and high viscosity. Its pH value is 5.0 +/- 1.0. Vea Menos | |
| Nubirox SP | Ferro Pigments | Nubirox SP es un fosfato de zinc exclusivo de partículas especiales. Es un pigmento anticorrosivo blanco con alta superficie específica y mucho más eficaz que el fosfato de zinc convencional. | |
| SILRES® BS SMK 2100 | Wacker Chemical Corporation | SILRES® BS SMK 2100 es una microemulsión de silicona sin disolventes concentrado a base de silanos y siloxanos que se diluye con agua para producir microemulsiones. | |
| TEGO® Phobe 6600 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 6600 is a white liquid emulsion of a polysiloxane resin/silane-blend for waterborne impregnations and primers for neutral and slightly alkaline substrates. This product has an excellent hydrophobing effect. It also has a water beading effect, ...Vea Mas TEGO® Phobe 6600 is a white liquid emulsion of a polysiloxane resin/silane-blend for waterborne impregnations and primers for neutral and slightly alkaline substrates. This product has an excellent hydrophobing effect. It also has a water beading effect, early water resistance, and a low tendency to pick up dirt. Vea Menos | Request Sample |
| Bayhydrol® UH 240 | Covestro | Una dispersión de poliuretano de poliéster aniónico alifático utilizada como un aglutinante de combinación en la formulación de imprimadores de secado al aire y forzado altamente flexibles, diluibles con agua y acabados de una sola capa para uso en plásti...Vea Mas Una dispersión de poliuretano de poliéster aniónico alifático utilizada como un aglutinante de combinación en la formulación de imprimadores de secado al aire y forzado altamente flexibles, diluibles con agua y acabados de una sola capa para uso en plásticos. Vea Menos | |
| RESYDROL® AZ 6711w/40WA | Allnex | RESYDROL® AZ 6711w/40WA is an oxidatively drying, ammonia neutralised, acryl- and urethane modified alkyd emulsion. It does not contain organic co-solvents and can be used as sole binders for paints, primers and wood-stains. This product is also recommend...Vea Mas RESYDROL® AZ 6711w/40WA is an oxidatively drying, ammonia neutralised, acryl- and urethane modified alkyd emulsion. It does not contain organic co-solvents and can be used as sole binders for paints, primers and wood-stains. This product is also recommended for combinations with long oil alkyd emulsions or waterborne modified oils for interior and exterior applications. Vea Menos | Request Sample |
| RHEOLATE® 266 | Elementis | RHEOLATE® 266 está basado en un nuevo polímero poliuretano de poliéter de urea. La actividad fue diseñada para brindar un espesamiento altamente eficiente a tasas de cizallamiento bajo a medio y espesamiento de la viscosidad por corte. Es ideal para siste...Vea Mas RHEOLATE® 266 está basado en un nuevo polímero poliuretano de poliéter de urea. La actividad fue diseñada para brindar un espesamiento altamente eficiente a tasas de cizallamiento bajo a medio y espesamiento de la viscosidad por corte. Es ideal para sistemas aplicados mediante aerosol o plecas, como por ejemplo acabados e imprimadores; lacas para muebles y maderas; pinturas de mantenimiento; adhesivos. Vea Menos | |
| K-FLEX® 850S Low-VOC Coalescent | LANXESS (former Emerald Performance Materials) | K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and indus...Vea Mas K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and industrial and protective coatings. It is also effective in nitrocellulosic and acrylic lacquers. Emerald Kalama Chemical was acquired by LANXESS in 2021. Vea Menos | |
| Anquamine® 728 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Anc...Vea Mas Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Ancarez® AR 555, and standard liquid epoxy resin. Vea Menos | Request Sample |
| CHS-Alkyd AL 3961 | Spolchemie | CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimat...Vea Mas CHS-Alkyd AL 3961 is a short oiled alkyd fast drying binder for waterborne coatings. This product is made from linoleic rich fatty acids and is supplied as a high viscous 75% solution in butyl glycol and butanol. The oil length for this product is estimated to be around 29%. This product has high hydroxyl content and paint stability. CHS-Alkyd AL 3961 is primarily used for fast drying water and solvent borne primers, topcoats. Vea Menos | |
| SILLITIN Z 86 | Hoffmann Mineral | SILLITIN Z 86 es una combinación natural de sílice amorfa criptocristalina corpuscular y caolinita laminar. Se utiliza como aditivo funcional, solo o en combinación con otros extensores o agentes de mateado. | |
| Nubifer NB-5970 | Ferro Pigments | El Nubifer NB-5970 es un pigmento de óxido de hierro negro micronizado fabricado mediante un proceso especial que reduce la presencia de aglomerados, lo que aporta mayor dispersabilidad, reproducibilidad del color y brillo. | |
| BECKOCURE™ EH 2260w/41WA | Allnex | Beckocure® EH 2260w/41WA es un endurecedor amino hidrófobo recomendado para la formulación de revestimientos metálicos de base acuosa, sin aminos básicos volátiles ni solventes. En combinación con dispersiones epoxi, se pueden formular imprimadores y mono...Vea Mas Beckocure® EH 2260w/41WA es un endurecedor amino hidrófobo recomendado para la formulación de revestimientos metálicos de base acuosa, sin aminos básicos volátiles ni solventes. En combinación con dispersiones epoxi, se pueden formular imprimadores y monocapas de secado rápido con una excelente protección contra la corrosión y muy buenas propiedades antiflacidez. Este producto tiene un comportamiento excelente y un rendimiento muy sólido incluso en superficies con preparación deficiente. Vea Menos | Request Sample |
| CYMEL® 325 | Allnex | La resina CYMEL® 325 es un reticulante de melamina, metilado, de alta funcionalidad de iminas suministrado en iso-butanol. Es altamente reactivo y tiene tendencia a la autocondensación, lo que proporciona películas con buena dureza, brillo, resistencia qu...Vea Mas La resina CYMEL® 325 es un reticulante de melamina, metilado, de alta funcionalidad de iminas suministrado en iso-butanol. Es altamente reactivo y tiene tendencia a la autocondensación, lo que proporciona películas con buena dureza, brillo, resistencia química y durabilidad en el exterior. Es adecuado para una amplia gama de aplicaciones de horneado a base de solventes y a base de agua, como formulaciones de revestimiento de bobinas y latas, imprimadores y acabados automotrices y revestimientos industriales generales. Vea Menos | Request Sample |
| MAINCOTE™ PR-15 | Univar Solutions | MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be ...Vea Mas MAINCOTE™ PR-15 is a waterborne acrylic resin designed to have a high degree of short-term block resistance and metal protection properties required of shop primers. It functions best where a finisher has some control of drying conditions. It can also be formulated into high-quality OEM and general industrial topcoat finishes for steel substrates treated with zinc or iron phosphate. Vea Menos | |
| Silane Coupling Agent KH-550 | Zhejiang Feidian Chemical Co., Ltd. | KH-550 es un agente de acoplamiento amino-funcional versátil que se utiliza en una amplia gama de aplicaciones para proporcionar mayor adherencia entre sustratos inorgánicos y polímeros orgánicos. La parte de la molécula que contiene silicio proporciona u...Vea Mas KH-550 es un agente de acoplamiento amino-funcional versátil que se utiliza en una amplia gama de aplicaciones para proporcionar mayor adherencia entre sustratos inorgánicos y polímeros orgánicos. La parte de la molécula que contiene silicio proporciona una fuerte unión a los sustratos. La función amina primaria reacciona con una amplia gama de materiales elastoméricos, termoestables y termoestáticos. Reacciona con agua. Tome precauciones para evitar el contacto con la humedad atmosférica. Es un promotor de adherencia en siliconas RTV y otros selladores híbridos. Asimismo es un componente útil en sistemas de imprimación para selladores híbridos y de poliuretano. Vea Menos | |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | COAPUR™ 2025 es un modificante reológico asociativo, no iónico y sin solvente, que proporciona una reología Newtoniana pura, a los sistemas transmitidos por agua. | |
| Coadis™ BR 85 | Arkema Rheology & Specialty Additives | Combinando la experiencia de productores de emulsión de alquido con el conocimiento de sistemas transmitidos por agua, COATEX ha diseñado el COADIS™BR 85, un dispersor específico para sistemas de emulsión de alquido. Los aglutinantes de emulsión de alquid...Vea Mas Combinando la experiencia de productores de emulsión de alquido con el conocimiento de sistemas transmitidos por agua, COATEX ha diseñado el COADIS™BR 85, un dispersor específico para sistemas de emulsión de alquido. Los aglutinantes de emulsión de alquido inter-actúan de una manera específica con los rellenos, los pigmentos y varios aditivos hidrofóbicamente modificados. Su reactividad es generalmente más fuerte, lo que resulta en viscosidades más altas, particularmente a velocidades bajas del esquileo y en una estabilidad de almacenamiento más pobre. Vea Menos | |
| Coapur™ XS 71 | Arkema Rheology & Specialty Additives | Este es un espesante de poliuretano, sin solvente, recomendado para sistemas a base de agua, los cuales deben combinar alta viscosidad en lata con compatibilidad excelente de pigmento, para su posterior utilización en coloración a maquina o manual. | |
| EMULSION E-2353 | Univar Solutions | EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and top...Vea Mas EMULSION E-2353 is a hard, all acrylic emulsion designed for use in factory-applied, waterborne, interior and exterior wood coatings. Its self-crosslinkable chemistry offers good exterior durability and is recommended for interior/exterior primers and topcoats. It can be blended with a softer polymer, such as RHOPLEX™ AC-261, to improve on flexibility and toughness. It can also be reacted with melamine formaldehyde resins, the combination of which offers an extremely durable finish, ideally suited for long-term warranty applications. Vea Menos | |
| SILLITIN Z 89 | Hoffmann Mineral | SILLITIN Z 89 es una combinación natural de sílice amorfa criptocristalina corpuscular y caolinita laminar. Se utiliza como aditivo funcional, solo o en combinación con otros extensores o agentes de mateado. | |
| Coapur™ XS 83 | Arkema Rheology & Specialty Additives | Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resist...Vea Mas Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resistance, sprayability and good compromise in terms of flow and leveling. Vea Menos | |
| SILLITIN V 88 | Hoffmann Mineral | SILLITIN V 88 es una combinación natural de sílice amorfa criptocristalina corpuscular y caolinita laminar. Se utiliza como aditivo funcional, solo o en combinación con otros extensores o agentes de mateado. | |
| Borchi® Gel LW 44 | OMG Borchers GmbH | Borchi® Gel LW 44 es un espesante no iónico a base de poliuretano que no contiene éter glicólico ni VOC conforme a las Directivas europeas 1999/13/EC y 2004/42/EG. Se fabrica con isocianatos alifáticos; por lo tanto, no influye negativamente en el amarill...Vea Mas Borchi® Gel LW 44 es un espesante no iónico a base de poliuretano que no contiene éter glicólico ni VOC conforme a las Directivas europeas 1999/13/EC y 2004/42/EG. Se fabrica con isocianatos alifáticos; por lo tanto, no influye negativamente en el amarilleo ni el caleo de la película de revestimiento. Una mínima cantidad de Borchi® Gel LW 44 espesa significativamente la fase acuosa. El líquido resultante es un pseudoplástico, es decir, su viscosidad es inversamente proporcional a su velocidad de corte. Borchi® Gel LW 44 es, por lo tanto, especialmente apto para aplicaciones de baja viscosidad, como aplicaciones de revestimiento por rociado o inmersión de sistemas de pintura a base de agua y emulsificable en agua (pinturas de acabado e imprimaciones), sistemas acuosos a base de poliuretano de dos componentes, sistemas epoxi de dos componentes y sistemas de poliéster. También se puede usar en dispersiones de copolímeros según los requisitos del perfil. Es muy ventajoso el efecto de la viscosidad en condiciones de bajo esfuerzo de cizalla. Vea Menos | |
| SILLIKOLLOID P 87 | Hoffmann Mineral | SILLIKOLLOID P 87 es una combinación natural de sílice amorfa criptocristalina corpuscular y caolinita laminar. Se utiliza como aditivo funcional, solo o en combinación con otros extensores o agentes de mateado. | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus® TS-4385 agente de control de espuma está diseñado para usarse en revestimientos y tintas de impresión. Este producto está especialmente recomendado para revestimientos de madera, pinturas arquitectónicas de brillo medio y alto y lacas para parqu...Vea Mas Drewplus® TS-4385 agente de control de espuma está diseñado para usarse en revestimientos y tintas de impresión. Este producto está especialmente recomendado para revestimientos de madera, pinturas arquitectónicas de brillo medio y alto y lacas para parqué. Se obtuvieron excelentes resultados en imprimadores acrílicos anticorrosivos, tintas de impresión flexográficas y sistemas a base de alquídicos reducibles en agua. Este producto es altamente eficiente y muestra excelente persistencia. Vea Menos | |
| HEUCORIN® RZ | Heucotech Ltd./Heubach | HEUCORIN® RZ es un zinc-5-nitroisoftalato, un eficaz inhibidor orgánico a base de sal de zinc de un compuesto nitro orgánico, para utilizar como inhibidor orgánico de la corrosión en revestimientos de protección. Este producto tiene un contenido de humeda...Vea Mas HEUCORIN® RZ es un zinc-5-nitroisoftalato, un eficaz inhibidor orgánico a base de sal de zinc de un compuesto nitro orgánico, para utilizar como inhibidor orgánico de la corrosión en revestimientos de protección. Este producto tiene un contenido de humedad de 5%, un contenido orgánico de 49 % y un cloruro soluble en agua máx. de 0,025 %. Mediante el agregado de cantidades muy pequeñas de HEUCORIN® RZ y de pigmentos HEUCOPHOS® y aprovechando las sinergias orgánicas-inorgánicas únicas es posible mejorar los revestimientos protectores de manera significativa. Vea Menos | Request Sample |
| Coadis™ 123 K | Arkema Rheology & Specialty Additives | COADIS 123 K es un dispersor versátil sintético que proporciona dispersión fácil de relleno y de pigmento, buena estabilidad de almacenamiento y resistencia al agua mejorada, en sistemas transmitidos por agua. Consecuentemente, es recomendado para una a...Vea Mas COADIS 123 K es un dispersor versátil sintético que proporciona dispersión fácil de relleno y de pigmento, buena estabilidad de almacenamiento y resistencia al agua mejorada, en sistemas transmitidos por agua. Consecuentemente, es recomendado para una amplia gama de sistemas transmitidos por agua. Vea Menos |
