| Culminal™ CT methylhydroxyethylcellulose | Ashland | Culminal™ CT methylhydroxyethylcellulose are cellulose ethers that, when dissolved in water, offer a variety of functional properties. They are powders, which are used as rheology modifiers, stabilizers, and water-retention agents in emulsion paints. | |
| CULMINAL™ Methylcellulose Derivatives | Ashland | CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-re...view more CULMINAL™ Methylcellulose Derivatives are cellulose ethers that, when dissolved in water, offer a variety of functional properties. Culminal products are powders, they are used as thickeners, protective colloids, stabilizers, susp ending aids and water-retention agents in many industrial applications. view less | |
| Curing Agent AQ 40 | Ichemco | Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like ...view more Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like protective films, binders for the leather finishing and coatings. view less | |
| Curing Agent ASB | Ichemco | Curing Agent ASB is a metallorganic compound solution. This product has a total solids content of 5.5-6.5%. Curing Agent ASB is most commonly used as a curing and cross-linking agent in solvent-based acrylic adhesive applications. | |
| Curing Agent C8 | Ichemco | Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to...view more Curing Agent C8 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 5-14 mPa.s. Curing Agent C8 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent D | Ichemco | Curing Agent D is a diisocyanate in a liquid solution form. This product has a total solids content of 64-66%. Curing Agent D is most commonly used as a curing and cross-linking agent in coating, adhesive, primer, and paint applications. | |
| Curing Agent MDI | Ichemco | Curing Agent MDI is a polyisocyanate in a liquid form. This product is most commonly used as a curing and cross-linking agent in solvent-based primer and adhesive applications. | |
| Curing Agent RF/AE | Ichemco | Curing Agent RF/AE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-29%. Curing Agent RF/AE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing agent RF/AE DE | Ichemco | Curing agent RF/AE DE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-27%. Curing agent RF/AE DE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing Agent V3 | Ichemco | Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive ancho...view more Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent V4 | Ichemco | Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage t...view more Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent W 9 | Ichemco | Curing Agent W 9 is a liquid polyisocyanate. This product has a total solids content of 79-81%. Curing Agent W 9 is most commonly used as a curing and cross-linking agent in water-based adhesive, varnish, and lacquer applications. | |
| Curing Agent W3 | Ichemco | Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather fi...view more Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather finishing applications. view less | |
| Curing Agent W3 DIL | Ichemco | Curing Agent W3 DIL is a water-dispersable polyisocyanate. This product has a total solids content of 69-71%. Curing Agent W3 DIL is most commonly used as a curing and cross-linking agent in adhesive, paint, and lacquer applications. | |
| Curox® I-200 | UNITED INITIATORS GMBH & CO KG | Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...view more Curox® I-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. view less | |
| Curox® I-300 | UNITED INITIATORS GMBH & CO KG | Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated p...view more Curox® I-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl isobutyl ketone that has been de-sensitized with aliphatic hydrocarbons. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel coats. view less | |
| Curox® M-100 | UNITED INITIATORS GMBH & CO KG | Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...view more Curox® M-100, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-102 | UNITED INITIATORS GMBH & CO KG | Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...view more Curox® M-102, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-103 | UNITED INITIATORS GMBH & CO KG | Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...view more Curox® M-103, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-104 | UNITED INITIATORS GMBH & CO KG | Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...view more Curox® M-104, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-180 | UNITED INITIATORS GMBH & CO KG | Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical sourc...view more Curox® M-180, in the form of a slightly yellowish liquid, is ketone peroxide consisting of a blend based on lower reactive methyl ethyl ketone and perester, which has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. view less | |
| Curox® M-200 | UNITED INITIATORS GMBH & CO KG | Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...view more Curox® M-200, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-202 | UNITED INITIATORS GMBH & CO KG | Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...view more Curox® M-202, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-300 | UNITED INITIATORS GMBH & CO KG | Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...view more Curox® M-300, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-302 | UNITED INITIATORS GMBH & CO KG | Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...view more Curox® M-302, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-302R | UNITED INITIATORS GMBH & CO KG | Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...view more Curox® M-302R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-303 | UNITED INITIATORS GMBH & CO KG | Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...view more Curox® M-303, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-303R | UNITED INITIATORS GMBH & CO KG | Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated poly...view more Curox® M-303R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-312 | UNITED INITIATORS GMBH & CO KG | Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester r...view more Curox® M-312, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-312R | UNITED INITIATORS GMBH & CO KG | Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester ...view more Curox® M-312R, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with aliphatic ester. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| Curox® M-403 | UNITED INITIATORS GMBH & CO KG | Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polye...view more Curox® M-403, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and gel-coats. view less | |
| Curox® MCH | UNITED INITIATORS GMBH & CO KG | Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyest...view more Curox® MCH, in the form of a colorless liquid, is ketone peroxide consisting of peroxides based on methyl ethyl ketone that has been de-sensitized with phthalate plasticizer. It is used as an initiator (radical source) in the curing of unsaturated polyester resins and surface coatings (fillers, gel-coats, putties, and top-coats). view less | |
| CV-1142 | NuSil Silicone Technology 1 | CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive d...view more CV-1142 is a non corrosive that has controlled volatility, RTV silicone adhesive/sealant.. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. Furthermore, it is also best used for applications requiring extremely low temperatures. view less | |
| CV-1143 | NuSil Silicone Technology 1 | CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical j...view more CV-1143 is a silicone adhesive/sealant that is best used in applications that require low outgassing and minimal volatile condensables under extreme operating conditions. It is also used as a bond and sealant in applications such as overhead or vertical joints that require a non-slumping, and one-part materials. view less | |
| CV-1144-0 | NuSil Silicone Technology 1 | CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space appl...view more CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space applications. This product also has a broad operating temperature range and can provide radiation and thermal stress resistance. view less | |
| CV-1146-2 | NuSil Silicone Technology 1 | CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating...view more CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating conditions. It also provides an atomic oxygen protection and resistance to radiation and thermal stress. view less | |
| CV-1148 | NuSil Silicone Technology 1 | CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlin...view more CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlined by NASA and the European Space Agency. view less | |
| CV-1152 | NuSil Silicone Technology 1 | CV-1152 is a silicone conformal coating that can be used for industrial or space applications that require low outgassing under extreme operating conditions. It can be utilized as a coating on rigid and flexible circuit boards, and can protect sensitive e...view more CV-1152 is a silicone conformal coating that can be used for industrial or space applications that require low outgassing under extreme operating conditions. It can be utilized as a coating on rigid and flexible circuit boards, and can protect sensitive electronic components such as connectors and switches. This product can also provide protection against harsh environments while maintaining good dielectric properties. view less | |
| CV-2187 | NuSil Silicone Technology 1 | CV-2187 is a two-part, translucent, pourable silicone system that offers a high tear strength and good physical properties. Its primary function is to provide protection for electrical components against shock, vibration, moisture, dust, chemicals and oth...view more CV-2187 is a two-part, translucent, pourable silicone system that offers a high tear strength and good physical properties. Its primary function is to provide protection for electrical components against shock, vibration, moisture, dust, chemicals and other environmental hazards. It can also protect potting connectors, cable and harness breakouts, molded high-voltage components, seals and gaskets. view less | |
| CV-2189-2 | NuSil Silicone Technology 1 | CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals an...view more CV-2189-2 is a one-part, black, platinum catalyzed silicone glop-top that has a thixotropic consistency and a low modulus. The function of this product is to ensure microchip reliability by providing protection against vibration, shock, dust, chemicals and other hazards. It is also ideal for applications that require precise delivery configurations. view less | |
| CV-2287 | NuSil Silicone Technology 1 | CV-2287 is a pourable silicone elastomer that offers a high tear strength and a broad operating temperature range. The high tear strength of this product make it ideal for reinforcing potting connectors, cable harness breakouts, molded high-voltage compon...view more CV-2287 is a pourable silicone elastomer that offers a high tear strength and a broad operating temperature range. The high tear strength of this product make it ideal for reinforcing potting connectors, cable harness breakouts, molded high-voltage components, seals and gaskets. It protects components against moisture, dust , chemicals, shock and vibration. view less | |
| CV-2289 | NuSil Silicone Technology 1 | CV-2289 is a two-part translucent silicone elastomer that is ideal for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product has good physical properties including a high tear strength ...view more CV-2289 is a two-part translucent silicone elastomer that is ideal for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product has good physical properties including a high tear strength and broad operating temperature range. These properties make this a good product for protecting electric components against environmental hazards such as dust, moisture, shock and vibration. view less | |
| CV-2289-1 | NuSil Silicone Technology 1 | CV-2289-1 is a two-part, white silicone system that has a broad operating temperature range. This makes it an ideal product to use as an adhesive for extreme conditions. It can provide protection against moisture, dust, and other environmental hazards. Th...view more CV-2289-1 is a two-part, white silicone system that has a broad operating temperature range. This makes it an ideal product to use as an adhesive for extreme conditions. It can provide protection against moisture, dust, and other environmental hazards. The high tear strength of this silicone elastomer make it affective in protecting seals, gaskets, and cable harness breakouts. view less | |
| CV-2391 | NuSil Silicone Technology 1 | CV-2391 is a low viscosity, low to medium density silicone rubber foam that can be utilized in shock and vibration dampening situations. It is ideal to use this product for intricate back-filling because it has a low viscosity. It can also be used for app...view more CV-2391 is a low viscosity, low to medium density silicone rubber foam that can be utilized in shock and vibration dampening situations. It is ideal to use this product for intricate back-filling because it has a low viscosity. It can also be used for applications that require low outgassing and minimal volatile condensable materials. view less | |
| CV-2500-2 | NuSil Silicone Technology 1 | CV-2500-2 is a two-part, black silicone system that is commonly used for space and electronic applications. It can give components protection from hazardous environments such as humidity and chemicals. This product also serves as an adhesive in optical ap...view more CV-2500-2 is a two-part, black silicone system that is commonly used for space and electronic applications. It can give components protection from hazardous environments such as humidity and chemicals. This product also serves as an adhesive in optical applications that require a black material to block light. view less | |
| CV-2502 | NuSil Silicone Technology 1 | CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embeddin...view more CV-2502 is a thixotropic, translucent RTV silicone that is especially useful when environmental protection is needed for electronic and space applications. It stops condensation from harming sensitive devices. This product also can function as an embedding compound for electronic systems. view less | |
| CV-2510 | NuSil Silicone Technology 1 | CV-2510 is a white RTV silicone that is flowable and can be utilized as a sealant, caulk, adhesive or potting material in electronic and space applications where high vacuum environments are encountered. It is also equipped to handle a broad operating tem...view more CV-2510 is a white RTV silicone that is flowable and can be utilized as a sealant, caulk, adhesive or potting material in electronic and space applications where high vacuum environments are encountered. It is also equipped to handle a broad operating temperature range. And it is functional in applications that require low outgassing under extreme operating conditions. view less | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...view more CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. view less | |
| CV-2640 | NuSil Silicone Technology 1 | CV-2640 is a silicone that is electrically conductive and has controlled volatility. It can be used for applications that require low outgassing and minimum volatile condensables under extreme operating conditions. This product can also be used to adhere ...view more CV-2640 is a silicone that is electrically conductive and has controlled volatility. It can be used for applications that require low outgassing and minimum volatile condensables under extreme operating conditions. This product can also be used to adhere covers onto housings or for any application where grooves require a flowable to limited flow material. view less | |
| CV-2646 | NuSil Silicone Technology 1 | CV-2646 is an electrically conductive RTV silicone that can be used as an adhesive to bond covers onto housings and other applications that require a non-flowable to a limited flow material. This product has a broad operating temperature range and can be ...view more CV-2646 is an electrically conductive RTV silicone that can be used as an adhesive to bond covers onto housings and other applications that require a non-flowable to a limited flow material. This product has a broad operating temperature range and can be used for RFI and EMI shielding in space and electrical applications. view less | |
| CV-2942 | NuSil Silicone Technology 1 | CV-2942 is a two-part, thermally conductive silicone that uses platinum-catalyzed addition cure. It can be used for applications that require low outgassing under extreme operating conditions to avoid condensation from building in sensitive devices. This ...view more CV-2942 is a two-part, thermally conductive silicone that uses platinum-catalyzed addition cure. It can be used for applications that require low outgassing under extreme operating conditions to avoid condensation from building in sensitive devices. This product is also able to provide moderate heat transfer between electrical/electronic components and their heat sinks. And, it can be used to adhere openings in modules or housings where a non-flowable material is needed. view less | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...view more CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. view less | |
| CV-2948 | NuSil Silicone Technology 1 | CV-2948 is a white, thermally conductive RTV silicone that is designed for exceptional performance in extreme high and low temperatures. It can be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves or other con...view more CV-2948 is a white, thermally conductive RTV silicone that is designed for exceptional performance in extreme high and low temperatures. It can be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves or other configurations that require a non-flowable material. This product also able to provide heat transfer between electrical/electronic components and their heat sinks. view less | |
| CV-2960 | NuSil Silicone Technology 1 | CV-2960 is a flowable, white, thermally conductive silicone that is able to provide moderate heat transfer between electrical components and their heat sinks. This product can be used for adhereing openings in housing and modules where grooves or other co...view more CV-2960 is a flowable, white, thermally conductive silicone that is able to provide moderate heat transfer between electrical components and their heat sinks. This product can be used for adhereing openings in housing and modules where grooves or other configurations require a limited flow material. It can also protect sensitive devices from condensation in environments that have extreme operating conditions. view less | |
| CV-2961 | NuSil Silicone Technology 1 | CV-2961 is a thermally conductive silicone that is designed for enhanced performance in extreme low and high temperatures. This makes it able to transfer heat between electronic components and their heat sinks. This product can also be applied in applicat...view more CV-2961 is a thermally conductive silicone that is designed for enhanced performance in extreme low and high temperatures. This makes it able to transfer heat between electronic components and their heat sinks. This product can also be applied in applications where low outgassing is required to avoid condensation in sensitive devices. view less | |
| CV-2963 | NuSil Silicone Technology 1 | CV-2963 is a white, two-part, thermally conductive silicone that is well suited for applications that require a broad temperature operating range. It can be used as an adhesive for base plates, circuit substrates, heat sinks or where grooves or other conf...view more CV-2963 is a white, two-part, thermally conductive silicone that is well suited for applications that require a broad temperature operating range. It can be used as an adhesive for base plates, circuit substrates, heat sinks or where grooves or other configurations require a non-flowable to limited flow material. This product can also transfer heat between heat sinks and electrical components. view less | |
| CV-8251 | NuSil Silicone Technology 1 | CV-8251 is a two-part clear silicone gel that is designed for enhanced performance in extreme low and high temperatures. Because of its low viscosity, it is an ideal material for potting intricate assemblies. It can also be used for applications that requ...view more CV-8251 is a two-part clear silicone gel that is designed for enhanced performance in extreme low and high temperatures. Because of its low viscosity, it is an ideal material for potting intricate assemblies. It can also be used for applications that require minimal volatile condensables to protect sensitive devices from condensation. view less | |
| CV-9042 | NuSil Silicone Technology 1 | CV-9042 is a thermally conductive, white silicone grease that can be applied to base and mounting studs of transistors and other electrical components as a heat-sink seal. This product has excellent resistance to moisture, ozone and oxidation over a wide ...view more CV-9042 is a thermally conductive, white silicone grease that can be applied to base and mounting studs of transistors and other electrical components as a heat-sink seal. This product has excellent resistance to moisture, ozone and oxidation over a wide temperature range. It can be used for its thermal conductivity because it has a high and low temperature stability with a low bleed. view less | |
| CV-9052 | NuSil Silicone Technology 1 | CV-9052 is an electrically conductive gray silicone grease that provides an excellent resistance to moisture, ozone and oxidation over a wide temperature range. This product can be used for applications requiring low gassing under extreme operating condit...view more CV-9052 is an electrically conductive gray silicone grease that provides an excellent resistance to moisture, ozone and oxidation over a wide temperature range. This product can be used for applications requiring low gassing under extreme operating conditions to avoid condensation from building in sensitive devices. It can also provide lubrication and static dissipation in space and electronic applications. view less | |
| CV-9341 | NuSil Silicone Technology 1 | CV-9341 is a white silicone grease that can provide high thermal conductivity, high and low temperature stability, and low bleed. It can be applied to the base and mounting studs of transistors and other electrical components as a heat-sink seal. It is al...view more CV-9341 is a white silicone grease that can provide high thermal conductivity, high and low temperature stability, and low bleed. It can be applied to the base and mounting studs of transistors and other electrical components as a heat-sink seal. It is also ideal for applications that require low outgassing under extreme operating conditions. view less | |
| CV1-1142 | NuSil Silicone Technology 1 | CV1-1142 is a one-part, translucent, self leveling RTV silicone. It can be used as a sealant, caulking, adhesive or potting material in electric and space applications that require little outgassing. It is also ideal for using as a sealant or bond with co...view more CV1-1142 is a one-part, translucent, self leveling RTV silicone. It can be used as a sealant, caulking, adhesive or potting material in electric and space applications that require little outgassing. It is also ideal for using as a sealant or bond with controlled flow for consistent bond lines in applications that require a high extrusion rate and one-part material. view less | |
| CV1-1142-4 | NuSil Silicone Technology 1 | CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensit...view more CV1-1142-4 is one-part, translucent, self-leveling RTV silicone that has a high extrusion rate. It is best used as a sealing, caulking, adhesive or potting material in applications that require little outgassing. This helps to avoid condensation in sensitive devices. The product also has a built in UV tracer and it can be used for applications that require a broad operating temperature range. view less | |
| CV1-1144-0 | NuSil Silicone Technology 1 | CV1-1144-0 is a one-part silicone dispersion that functions as a protective overcoating for atomic oxygen resistance in space applications. Due to its non-corrosive nature, it is ideal for coating electronic components and provides resistance against radi...view more CV1-1144-0 is a one-part silicone dispersion that functions as a protective overcoating for atomic oxygen resistance in space applications. Due to its non-corrosive nature, it is ideal for coating electronic components and provides resistance against radiation and thermal stress. This product meets the lo outgas specifications outlined in NASA and the European Space Agency. view less | |
| CV1-1148 | NuSil Silicone Technology 1 | CV1-1148 is a one-part black silicone dispersion that can be used for applications that require minimal volatile condensables under extreme operating conditions. This product can also provide atomic oxygen and electrostatic discharge protection. It is sui...view more CV1-1148 is a one-part black silicone dispersion that can be used for applications that require minimal volatile condensables under extreme operating conditions. This product can also provide atomic oxygen and electrostatic discharge protection. It is suitable to use in applications that require a broad operating temperature range. view less | |
| CV1-2289-1 | NuSil Silicone Technology 1 | CV1-2289-1 is a potting and encapsulating silicone elastomer that has a 1:1 Mix Ratio (Part A:B). This product is ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, gaskets and seals due to its high tear strength....view more CV1-2289-1 is a potting and encapsulating silicone elastomer that has a 1:1 Mix Ratio (Part A:B). This product is ideal for use in potting connectors, cable harness breakouts, molded high-voltage terminals, gaskets and seals due to its high tear strength. It can provide protection for electronic components against shock, vibration, dust, chemicals, moisture and other environmental hazards. It can also be used in applications that require low outgassing under extreme operating conditions. view less | |
| CV1-2566 | NuSil Silicone Technology 1 | CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low ...view more CV1-2566 is a red RTV silicone that can be used as an adhesive to help control high vacuum environments in electronic and space applications. This product can also withstand hazards such as extreme high or low temperatures. If an application requires low outgassing this is the ideal sealant for the job. view less | |
| CV1-2640 | NuSil Silicone Technology 1 | CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and...view more CV1-2640 is an electrically conductive RTV silicone that can be used to adhere covers onto housings or any application where grooves and other configurations require a non flowable material. It can also be utilized as a shield for EMI and RFI in space and electrical applications. Another function of this product is to protect sensitive devices from condensation. view less | |
| CV1-2960 | NuSil Silicone Technology 1 | CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that...view more CV1-2960 is a thermally conductive silicone that can be used to adhere base plates, integrated circuit substrates, and heat sinks or other configurations that require a flowable to limited flow material. This product is also suitable for applications that require low outgassing under extreme operating conditions. It is able to provide heat transfer between electronic components and their heat sinks. view less | |
| CV1-2964 | NuSil Silicone Technology 1 | CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. ...view more CV1-2964 is a silicone elastomer the has controlled volatility and can be used to transfer heat between heat sinks and electrical/electronic components. It can also be utilized for applications requiring low outgassing under extreme operating conditions. This product may be used as an adhesive for integrated circuit substrates, base plates, heat sinks or where grooves require a limited flow material. view less | |
| CV1-8151 | NuSil Silicone Technology 1 | CV1-8151 is a two-part, clear silicone gel that has a controlled volatility. It can be used for applications that require low outgassing under extreme operating conditions. This product can also be utilized as an embedding or potting compound for environm...view more CV1-8151 is a two-part, clear silicone gel that has a controlled volatility. It can be used for applications that require low outgassing under extreme operating conditions. This product can also be utilized as an embedding or potting compound for environmental protection of electronic components in space applications. view less | |
| CV10-2568 | NuSil Silicone Technology 1 | CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stabi...view more CV10-2568 is a two part RTV ablative silicone that can be used as a bonding, sealing, or potting material in electronic and space applications. This product will provide radiation resistance, low thermal conductivity, oxidation stability and thermal stability. It can also be especially useful to bond solar cells to solar array panels as it has a broad operating temperature range. view less | |
| CV14-2500 | NuSil Silicone Technology 1 | CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechani...view more CV14-2500 is a controlled volatility silicone system that incorporates an adhesion promoter and has a low viscosity. It can serve as a potting or embedding compound for electronic components to provide protection from extreme, radiation, humidity, mechanical and thermal stress. This product can also be used to adhere covers onto housings, or any applications where grooves require a material that has superior flow. view less | |
| CV16-2500 | NuSil Silicone Technology 1 | CV16-2500 is a silicone elastomer that is designed for enhanced performance in extreme low and high temperatures. It can protect electronic components from environmental hazards such as humidity and radiation. This product is ideal for applications that ...view more CV16-2500 is a silicone elastomer that is designed for enhanced performance in extreme low and high temperatures. It can protect electronic components from environmental hazards such as humidity and radiation. This product is ideal for applications that require super flow because of its low viscosity. view less | |
| CV2-1147 | NuSil Silicone Technology 1 | CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitabl...view more CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitable to use in applications that require low outgassing in extreme operating conditions. view less | |
| CV2-1148 | NuSil Silicone Technology 1 | CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for...view more CV2-1148 is a black silicone oxygen protective coating that can be used for bonding applications where a non-slumping and one-part material is required. This product can also provide excellent joint coverage and thin section encapsulation. It is ideal for applications that require minimal volatile condensables under extreme operating conditions. view less | |
| CV2-2289-1 | NuSil Silicone Technology 1 | CV2-2289-1 is encapsulating silicone elastomer that offers medium strength, low modulus, and a broad operating temperature range. It is an ideal adhesive application where large surface areas must be covered. It also provides protection for electrical com...view more CV2-2289-1 is encapsulating silicone elastomer that offers medium strength, low modulus, and a broad operating temperature range. It is an ideal adhesive application where large surface areas must be covered. It also provides protection for electrical components against shock, vibration, moisture, dust, chemicals and other environmental hazards. view less | |
| CV2-2566 | NuSil Silicone Technology 1 | CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can fun...view more CV2-2566 is a two-part, thixotropic red RTV silicone that can be used as a potting material, sealant, caulking, or adhesive in space and electronic applications where a high vacuum environment is encountered. This is a versatile product because in can function within a broad operating temperature range. It can also be used to bond solar cells to solar array panels. view less | |
| CV2-2640 | NuSil Silicone Technology 1 | CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-...view more CV2-2640 is a static dissipative RTV silicone that can be used to protect electrical components and sensitive devices from condensation building up. This product can also be used for EMI and RFI shielding in electronic and space applications. It is a non-flowing material so it can be used to adhere covers onto housings. view less | |
| CV2-2646 | NuSil Silicone Technology 1 | CV2-2646 is an electrically conductive RTV silicone that is used for RFI and EMI shielding in electronic and space applications. This product is able to maintain electric conductivity over a broad operating temperature range. It is well suited for formed-...view more CV2-2646 is an electrically conductive RTV silicone that is used for RFI and EMI shielding in electronic and space applications. This product is able to maintain electric conductivity over a broad operating temperature range. It is well suited for formed-in-place conductive gaskets and designed for enhanced performance in extreme low and high temperatures. view less | |
| CV2-2946 | NuSil Silicone Technology 1 | CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material...view more CV2-2946 is a volatility controlled silicone that cures with the addition of heat and is desgned to allow bond line thickness of <=50 Microns. It can be used to adhere integrated circuit substrates, base plates, heat sinks or where a non-flowable material is required. This product also has the ability to provide heat transfer between electrical/electronic component and their heat sinks. view less | |
| CV3-1142 | NuSil Silicone Technology 1 | CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables und...view more CV3-1142 is a one-part translucent material that is also a non-slumping silicone RTV. It is best used as a sealant, caulk, adhesive or potting material in electrical and space applications that require low outgassing, and minimal volatile condensables under extreme operating conditions. This product also provides corrosion protection for sensitive circuits such as connectors, switches and other electrical components. It can also be utilized in bonding and sealing applications that require a non-slumping material. view less | |
| CV3-1144-1 | NuSil Silicone Technology 1 | CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provid...view more CV3-1144-1 is a white silicone dispersion that has a non-corrosive cure which makes it an ideal coating for electronics components. This product can be utilized as a protective overcoating for atomic oxygen resistance in space applications. It also provides protection from thermal stress and radiation. view less | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...view more CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. view less | |
| CV7-2289-1 | NuSil Silicone Technology 1 | CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical sy...view more CV7-2289-1 is an encapsulating silicone elastomer that is best used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. In these extreme conditions this product will help protect electrical systems against environmental hazards such as vibration, shock, dust and chemicals. view less | |
| CYCAT® 296-9 | Allnex | CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ran...view more CYCAT® 296-9 Catalyst is an unique, phosphoric acid derivative "mild" catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked. view less | Request Sample |
| CYCAT® 4040 | Allnex | CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to...view more CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems. view less | Request Sample |
| CYCAT® 4045 | Allnex | CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluen...view more CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH. view less | Request Sample |
| CYCAT® 500 | Allnex | CYCAT® 500 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CY...view more CYCAT® 500 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT® 500 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT® 500 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT® 500 is a free acid, package stability could be adversely impacted. view less | Request Sample |
| CYCAT® 600 | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| CYCAT® 600A | Allnex | CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters...view more CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). view less | Request Sample |
| CYCAT® 6020 | Allnex | CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor. view less | Request Sample |
| CYCAT® 6030 | Allnex | CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, syste...view more CYCAT® 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor. view less | Request Sample |
| CYCAT® 655 CATALYST | Allnex | CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYC...view more CYCAT 655 catalyst is a strong acid catalyst based on dinonylnaphthalene disulfonic acid supplied in isobutanol. It is recommended to accelerate the cure between hydroxyl, carboxyl, and amide functional groups with alkylated amino crosslinking agents. CYCAT 655 is recommended for use in electrocoating applications to achieve cure in the range of 110 - 135°C in 15 - 30 minutes, or to reduce the baking time at higher baking temperatures. CYCAT 655 is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid catalysts. Since CYCAT 655 is a free acid, package stability could be adversely impacted. view less | Request Sample |
| CYCAT® 6925 | Allnex | CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are ...view more CYCAT® 6925 catalyst is an amine-blocked dodecylbenzene sulfonic acid catalyst supplied in isopropanol and 2-butoxyethanol. It is used to initiate and accelerate the cure of aminoplasts, such as those based on melamine, urea, and benzoguanamine which are used to crosslink 1K thermoset systems. This product can be used in food contact applications. For the latest information about the compliance status with FDA, EU, Chinese or other food regulations. view less | Request Sample |
| CYCAT® VXK 6364 | Allnex | CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in s...view more CYCAT® VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins (hexamethoxymethylmelamine) like CYMEL 303 LF. Post curing of films containing CYCAT® VXK 6364 can occur. CYCAT® VXK 6364 is usable in solvent and waterborne thermosetting vehicles. view less | Request Sample |
| CYCAT® VXK 6395 | Allnex | CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive syste...view more CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive systems. view less | Request Sample |
| CYCAT® XK 406 N | Allnex | Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion prop...view more Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems. view less | Request Sample |
| Cyclic Trimethylolpropane Formal | Perstorp | Cyclic Trimethylolpropane Formal (CTF) is a cycloaliphatic monofunctional alcohol. It is a clear colorless liquid. CTF is used in acrylic acid esters for radiation curing and in fatty acid esters in synthetic lubricants | |
| CYMEL® 1123 | Allnex | CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesio...view more CYMEL® 1123 resin is a highly methylated/ethylated benzoguanamine resin developed primarily for use as a crosslinking agent in electrocoating and conventional coatings requiring high detergent and chemical resistance. Its excellent balance between adhesion and film flexibility, especially after several cure cycles, makes it particularly well suited for can coating applications. While it is insoluble in water, this product shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
| CYMEL® 1130 | Allnex | CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for gene...view more CYMEL® 1130 resin is a highly methylated n-butylated melamine crosslinker with a high degree of alkylation, low methylol content and a low imino functionality. The hydrophobic nature combined with the high solids properties makes it very suitable for general industrial high solids baking formulations requiring improved wetting of metal substrates, film adhesion and humidity resistance properties. This product is insoluble in water but shows excellent compatibility with water soluble backbone polymers and provides very good stability in pH-buffered alkaline waterborne formulations. view less | Request Sample |
