| Anti-blocking agent SR | Yantai Suny Chem International Co., Ltd. | Anti-blocking agent SR is a neutral white waxy solid, which is produced through short-range molecular distillation and purification. It can be miscible with paraffin, dissolved in ethanol, chloroform, ether but not in water. | |
| BYK®-394 | BYK | BYK®-394 is a silicone-free acrylic release agent with leveling properties. It is a solution of a polyacrylate copolymer. This product is recommended for solvent-borne and solvent-free baking and 2-pack PU coatings. The additive orientates to the paint su...view more BYK®-394 is a silicone-free acrylic release agent with leveling properties. It is a solution of a polyacrylate copolymer. This product is recommended for solvent-borne and solvent-free baking and 2-pack PU coatings. The additive orientates to the paint surface and crosslinks into the polymer network due to its reactivity and is therefore fixed at the paint surface. BYK-394 reacts by primary OH-groups with binders and is used in solvent-borne systems. The additive reacts with the following binders: 2-pack Polyurethane, Alkyd-Melamine, Polyester-Melamine, Acrylic-Melamine, AcrylicEpoxy combinations. This additive improves leveling and gloss. It produces a long wave effect and prevents cratering without influence on surface tension (silicone-free). BYK-394 is thermally stable. view less | |
| BYK®-P 9051 | BYK | BYK®-P 9051 is a processing additive for BMC with mold release properties. It is a combination of surface active substances and polymers. It is an additive to facilitate processing of BMC/DMC. It also imparts mold release properties. The product does not ...view more BYK®-P 9051 is a processing additive for BMC with mold release properties. It is a combination of surface active substances and polymers. It is an additive to facilitate processing of BMC/DMC. It also imparts mold release properties. The product does not contribute to fogging. In BMC for headlamp reflectors it minimizes fogging of the molded parts. Due to its lower viscosity the additive is easier to process than BYK-P 9050. view less | |
| BYK-SILCLEAN 3701 | BYK | BYK-SILCLEAN 3701 is a silicone-containing surface additive for epoxy resin systems to improve cleanability (easy-to-clean effect). Permanent effect as a result of cross-linking in the system. | |
| Dynoadd® R-1001 | Dynoadd by Dynea | Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the clean...view more Dynoadd® R-1001 is a silicone-free release agent that when applied directly to application equipment prevents wood adhesives of all types from bonding to the metal surface. This prevents permanent adhesion and build-up of glue residues and eases the cleaning of application equipment. Dynoadd® R-1001 prevents adhesion of most C84commonly used wood adhesive systems to production equipment greatly easing clean-up and reducing down-time. Dynoadd® R-1001 is effective in preventing the adhesion of formaldehyde resin based-, polyurethane based- and PVAc-based- adhesives to production equipment. view less | Request Sample |
| Fluoro P-77 (FEP Powder) | Shamrock Technologies b.v.b.a. | Fluoro P-77 is a FEP powder used in applications where release properties are required. Fluoro P77 offers high gloss and smoothness when fused. | |
| Hydrocer 145 (Amide Wax Dispersion) | Shamrock Technologies b.v.b.a. | Hydrocer 145 is an amide wax in a non-ionic aqueous dispersion. Hydrocer 145 is recommended for use in the water-based coating systems. | |
| Michem® Emulsion 12235 | Michelman | Michem® Emulsion 12235 provides abrasion resistance in coatings and varnishes. It also improves release properties in metal stamping applications. | |
| Michem® Emulsion 27445 | Michelman | Michem® Emulsion 27445 provides excellent water repellency and wood protection when used in the paints and coatings industries. It is also an effective anti-block and release agent for coatings and adhesives. | |
| Michem® Emulsion 52137P | Michelman | Michem® Emulsion 52137P as an additive, provides lubricity and is effective as a high temperature mold release for metal dies. | |
| Michem® Emulsion 61335P | Michelman | Michem® Emulsion 61335P is an additive which provides excellent slip and mar resistance and anti-blocking properties. This product can be used as a release and slip aid in adhesives and coatings. | |
| Michem® Emulsion 76930 | Michelman | Michem® Emulsion 76930 is an anionic wax emulsion that provides water resistance and anti-block properties. It can also be classified as a high temperature and pressure release agent. | |
| Michem® Lube 124P | Michelman | Michem® Lube 124P as an additive provides release and act as a detackifier for synthetic and natural rubber. It is used successfully in latex glove formulation and also offers slip resistance for adhesives and sealants. | |
| Michem® Lube 182PFPHS | Michelman | Michem® Lube 182PFPHS can provide slip, release and antiblock properties in a number of applications, ranging from wood coatings to being blended with synthetic and natural lattices. This product is also a mar and scratch resistant and water repellent add...view more Michem® Lube 182PFPHS can provide slip, release and antiblock properties in a number of applications, ranging from wood coatings to being blended with synthetic and natural lattices. This product is also a mar and scratch resistant and water repellent additive in varnishes and other coatings. view less | |
| Michem® Lube 382 | Michelman | Michem® Lube 382 can provide slip, release and antiblock properties in a number of applications, ranging from wood coatings to being blended with synthetic and natural lattices. This product is also a mar and scratch resistant and water repellent additive...view more Michem® Lube 382 can provide slip, release and antiblock properties in a number of applications, ranging from wood coatings to being blended with synthetic and natural lattices. This product is also a mar and scratch resistant and water repellent additive in varnishes and other coatings. view less | |
| NEVOSIL® PRA 1500 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1500, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low mel...view more NEVOSIL® PRA 1500, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. view less | |
| NEVOSIL® PRA 1530 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1530, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melt...view more NEVOSIL® PRA 1530, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. view less | |
| NEVOSIL® PRA 1555 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1555, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melt...view more NEVOSIL® PRA 1555, in the form of a white liquid, is a non-ionic, alkyl and aralkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. view less | |
| NEVOSIL® PRA 1630 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1630, in the form of a white liquid, is a non-ionic, alkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. ...view more NEVOSIL® PRA 1630, in the form of a white liquid, is a non-ionic, alkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. view less | |
| NEVOSIL® PRA 1655 | Ultrakim Kimya San. ve Tic. A.Åž. | NEVOSIL® PRA 1655, in the form of a white liquid, is a non-ionic, alkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. ...view more NEVOSIL® PRA 1655, in the form of a white liquid, is a non-ionic, alkyl modified polydimethylsiloxane fluid. This product is a mold-release agent for the production of rubber and plastic products and the casting process of metals with low melting points. This product is preferred for painting and coating applications of the molded parts. view less | |
| NOFO 1032 | PCI Group, Inc. | NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperatu...view more NOFO 1032 is a blend of clear silicone and organic acid esters. It is used in most non-aqueous based coating systems, adhesives and inks. It fosters the release of air from high build epoxy, urethane, and casting resins. It is stable over a wide temperature range and will not cause surface defects associated with most silicone defoamers. view less | |
| OMBRELUB RA | Munzing Chemie | OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastif...view more OMBRELUB RA is a yellow-brown liquid combination of liquid hydrocarbons and surface active compounds, anionic, Na/TEA salt. It shows a releasing effect in strippable coatings and protection varnishes based on emulsion polymers. At the same time it plastifies the coating without migration effects. Aqueous coatings which are formulated with OMBRELUB RA can be removed from all common substrates whether it be metal, glass or plastic without any problem. As OMBRELUB RA is nearly colourless it can be perfectly used in clear coats and white lacquers. Main applications include strippable coatings, transport protection coatings, hobby paints, and coatings for spray booths. view less | |
| Release FL7 | Ichemco | Release FL7 is a solvent-based release agent. This product has a total solids content of 29-31% and a Ford Cup viscosity of 20-24 seconds. Release FL7 is most commonly used as a release agent in paper and corona-treated printed PP and PE film coating ap...view more Release FL7 is a solvent-based release agent. This product has a total solids content of 29-31% and a Ford Cup viscosity of 20-24 seconds. Release FL7 is most commonly used as a release agent in paper and corona-treated printed PP and PE film coating applications. view less | |
| Release FR 100 | Ichemco | Release FR 100 is a vegetable oil, release agent, and polyamidic resin-based compound. This product has a total solids content of 98-100%. Release FR 100 is most commonly used in PS adhesive tape and film productions applications. | |
| Release FR 100 V | Ichemco | Release FR 100 V is a release agent. This product has a total solids content of 99-100%. Release FR 100 V is most commonly used in PE and aluminum tape production applications. | |
| Release FR 2 AB | Ichemco | Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape a...view more Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape and film production applications. view less | |
| Release FR 5 C | Ichemco | Release FR 5 C is an additive and release agent-based compound in a toluene solution. This product has a total solids content of 4-6%. Release FR 5 C is most commonly used as a release agent in PS adhesive tape and film production applications. | |
| Release HT 100 | Ichemco | Release HT 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 97-107°C. Release HT 100 is most commonly used as a release agent in corona and non corona-treated film coating...view more Release HT 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 97-107°C. Release HT 100 is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 D | Ichemco | Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating ...view more Release K 100 D is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 85-95°C. Release K 100 D is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 D DIL. 1 ECO | Ichemco | Release K 100 D DIL. 1 ECO is a polyurethane release agent in an octane and isopropyl alcohol solvent solution. This product has a total solids content of 0.5-1.5%. Release K 100 D DIL. 1 ECO is most commonly used as a release agent in PP, PE, PVC, and po...view more Release K 100 D DIL. 1 ECO is a polyurethane release agent in an octane and isopropyl alcohol solvent solution. This product has a total solids content of 0.5-1.5%. Release K 100 D DIL. 1 ECO is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. view less | |
| Release K 100 D DIL.2 | Ichemco | Release K 100 D DIL.2 is a polyvinylcarbonate release agent in a toluene solvent solution. This product has a total solids content of 1.8-2.2%. Release K 100 D DIL.2 is most commonly used in adhesive tape production applications. | |
| Release K 100 DF | Ichemco | Release K 100 DF is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 80-90°C. Release K 100 DF is most commonly used as a release agent in acrylic adhesive, as well as corona and...view more Release K 100 DF is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 80-90°C. Release K 100 DF is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. view less | |
| Release K 100 DI | Ichemco | Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coatin...view more Release K 100 DI is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 78-90°C. Release K 100 DI is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 DI DIL. 1 ECO | Ichemco | Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive...view more Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive tape production applications. view less | |
| Release K 100 DI DIL. 1.5 ECO | Ichemco | Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhe...view more Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhesive tape production applications. view less | |
| Release K 100 DM | Ichemco | Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as...view more Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. view less | |
| Release K 100 E | Ichemco | Release K 100 E is a release agent . This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 E is most commonly used as a release agent in PE and PP film coating applications. | |
| Release K 100 ES | Ichemco | Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating a...view more Release K 100 ES is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 90-96°C. Release K 100 ES is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release K 100 H | Ichemco | Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating ap...view more Release K 100 H is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 94-104°C. Release K 100 H is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release KB 100 | Ichemco | Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in corona and non corona-treated film coating ap...view more Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in corona and non corona-treated film coating applications. view less | |
| Release KB 100 A | Ichemco | Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in acrylic adhesive, as well as corona and non c...view more Release KB 100 is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range of 74-82°C. Release KB 100 is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. view less | |
| Release LN 2 A | Ichemco | Release LN 2 A is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release LN 2 A is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. | |
| Release Master K20 E PP | Ichemco | Release Master K20 E PP is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release Master K20 E PP is most commonly used as a release agent in low-noise OPP adhesive tape printing applicati...view more Release Master K20 E PP is a modified polycondensed polymer in a xylene solvent solution. This product has a total solids content of 24-26%. Release Master K20 E PP is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. view less | |
| Release PP 100 | Ichemco | Release PP 100 is a synthetic polymer. This product has a total solids content of 98-100% and a melting point of 83-93°C. Release PP 100 is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. | |
| Release PP 25 | Ichemco | Release PP 25 is a synthetic polymer in a solvent solution. This product has a total solids content of 22-24% and a melting range of 90-115°C. Release PP 25 is most commonly used as a release agent in adhesive tape printing applications. | |
| Release PP 25 DIL | Ichemco | Release PP 25 DIL is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.41-0.51%. Release PP 25 DIL is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.35 | Ichemco | Release PP 25 DIL. 0.35 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.3-0.4%. Release PP 25 DIL. 0.35 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.6 | Ichemco | Release PP 25 DIL. 0.6 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.55-0.65%. Release PP 25 DIL. 0.6 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 0.8 | Ichemco | Release PP 25 DIL. 0.8 is a polyurethane release agent in a solvent solution. This product has a total solids content of 0.75-0.85%. Release PP 25 DIL. 0.8 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL 1.5 | Ichemco | Release PP 25 DIL 1.5 is a polyurethane release agent in a solvent solution. This product has a total solids content of 1.4-1.6%. Release PP 25 DIL 1.5 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 2 | Ichemco | Release PP 25 DIL. 2 is a polyurethane release agent in a solvent solution. This product has a total solids content of 1.8-2.2%. Release PP 25 DIL. 2 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL 2.5 | Ichemco | Release PP 25 DIL 2.5 is a polyurethane release agent in a solvent solution. This product has a total solids content of 2.3-2.7%. Release PP 25 DIL 2.5 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release PP 25 DIL. 3 | Ichemco | Release PP 25 DIL. 3 is a polyurethane release agent in a solvent solution. This product has a total solids content of 2.8-3.2%. Release PP 25 DIL. 3 is most commonly used as a release agent in PP, PE, PVC, and polyester film coating applications. | |
| Release W 30 HS4 | Ichemco | Release W 30 HS4 is a water based release agent based on synthetic SBR polymers added with hydrophobic and releasing agents. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 30 HS4 is most ...view more Release W 30 HS4 is a water based release agent based on synthetic SBR polymers added with hydrophobic and releasing agents. This product has a total solids content of 29-31% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 30 HS4 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 G2 | Ichemco | Release W 40 G2 is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 150-450 mPa.s. Release W 40 G2 is most commonly used as a release agent in hot-melt and solventborne adhesive applicati...view more Release W 40 G2 is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 150-450 mPa.s. Release W 40 G2 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. view less | |
| Release W 40 GB4 LV | Ichemco | Release W 40 GB4 LV is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 30-100 mPa.s. Release W 40 GB4 LV is most commonly used as a release agent in hot-melt adhesive and porous substrat...view more Release W 40 GB4 LV is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 30-100 mPa.s. Release W 40 GB4 LV is most commonly used as a release agent in hot-melt adhesive and porous substrate coating applications. view less | |
| Release W 40 GP1 | Ichemco | Release W 40 GP1 is a water-based product based on acrylic dispersions. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Release W 40 GP1 is most commonly used as a printable release coat in paper ap...view more Release W 40 GP1 is a water-based product based on acrylic dispersions. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Release W 40 GP1 is most commonly used as a printable release coat in paper applications. view less | |
| Release W 40 HA 5 | Ichemco | Release W 40 HA 5 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 5 is most common...view more Release W 40 HA 5 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 5 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HA 6 | Ichemco | Release W 40 HA 6 is a water-based release agent based on synthetic acrylic polymers. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 6 is most commonly used as a release agent in poro...view more Release W 40 HA 6 is a water-based release agent based on synthetic acrylic polymers. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 500-900 mPa.s. Release W 40 HA 6 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HA 8 | Ichemco | Release W 40 HA 8 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 600-1200 mPa.s. Release W 40 HA 8 is most commo...view more Release W 40 HA 8 is a water-based release agent based on synthetic acrylic polymers with a very high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 600-1200 mPa.s. Release W 40 HA 8 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 HS 4 | Ichemco | Release W 40 HS 4 is a water-based release agent based on synthetic SBR polymers with a high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 40 HS 4 is most commonly used ...view more Release W 40 HS 4 is a water-based release agent based on synthetic SBR polymers with a high water repellency. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 40 HS 4 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 40 S | Ichemco | Release W 40 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Release W 40 S is most commonly used as a release agent in porous subst...view more Release W 40 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 1000-3000 mPa.s. Release W 40 S is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 45 GB 1 | Ichemco | Release W 45 GB 1 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Release W 45 GB 1 is most commonly used as a release agent in p...view more Release W 45 GB 1 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 1000 mPa.s. Release W 45 GB 1 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W 45 GB 15 | Ichemco | Release W 45 GB 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GB 15 is most commonly used as a release agent in hot-me...view more Release W 45 GB 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GB 15 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. view less | |
| Release W 45 GB 5 | Ichemco | Release W 45 GB 5 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 45 GB 5 is most commonly used as a controlled release agent in ho...view more Release W 45 GB 5 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 45 GB 5 is most commonly used as a controlled release agent in hot-melt adhesive applications. view less | |
| Release W 45 GS 15 | Ichemco | Release W 45 GS 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GS 15 is most commonly used as a release agent in hot-me...view more Release W 45 GS 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GS 15 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. view less | |
| Release W 45 HS 4 | Ichemco | Release W 45 HS 4 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 45 HS 4 is most commonly used as a release agent in porous substr...view more Release W 45 HS 4 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W 45 HS 4 is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W20 G BV | Ichemco | Release W20 G BV is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 10-30 mPa.s. Release W20 G BV is most commonly used as a release agent in porous substrate c...view more Release W20 G BV is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 10-30 mPa.s. Release W20 G BV is most commonly used as a release agent in porous substrate coating applications. view less | |
| Release W20 GB1 | Ichemco | Release W20 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 800-1300 mPa.s. Release W20 GB1 is most commonly used as a release coat in substrate coating ...view more Release W20 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 800-1300 mPa.s. Release W20 GB1 is most commonly used as a release coat in substrate coating applications. view less | |
| Release W20 GP | Ichemco | Release W20 GP is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1200-1600 mPa.s. Release W20 GP is most commonly used as a printable and writable release coat...view more Release W20 GP is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1200-1600 mPa.s. Release W20 GP is most commonly used as a printable and writable release coat in paper applications. view less | |
| Release W20 GP1 | Ichemco | Release W20 GP1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Release W20 GP1 is most commonly used as a printable and writable release co...view more Release W20 GP1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 19-21% and a Brookfield viscosity at 25°C of 1000-1500 mPa.s. Release W20 GP1 is most commonly used as a printable and writable release coat in paper applications. view less | |
| Release W20 HS4 | Ichemco | Release W20 HS4 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 900-1200 mPa.s. Release W20 HS4 is most commonly used as a release agent in porous subs...view more Release W20 HS4 is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 900-1200 mPa.s. Release W20 HS4 is most commonly used as a release agent in porous substrate applications. view less | |
| Release W20 S | Ichemco | Release W20 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W20 S is most commonly used as a release agent in porous substrat...view more Release W20 S is a water-based release agent based on synthetic SBR polymers. This product has a total solids content of 20-22% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W20 S is most commonly used as a release agent in porous substrate applications. view less | |
| Release W22 WP | Ichemco | Release W22 WP is a non-silicone release agent. This product has a total solids content of 21.5-23.5% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W22 WP is most commonly used as a release agent in written and ink-jet printed paper coatin...view more Release W22 WP is a non-silicone release agent. This product has a total solids content of 21.5-23.5% and a Brookfield viscosity at 25°C of 500-1000 mPa.s. Release W22 WP is most commonly used as a release agent in written and ink-jet printed paper coating applications. view less | |
| Release W40 GB1 | Ichemco | Release W40 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB1 is most commonly used as a release agent in hot-melt and so...view more Release W40 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB1 is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release W40 GB1 LV | Ichemco | Release W40 GB1 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB1 LV is most commonly used as a release agent in hot-melt and s...view more Release W40 GB1 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB1 LV is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release W40 GB2 | Ichemco | Release W40 GB2 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH level of 8-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release Release W40 GB2 is most commonly used as a releas...view more Release W40 GB2 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH level of 8-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release Release W40 GB2 is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release W40 GB3 | Ichemco | Release W40 GB3 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 7-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB3 is most commonly used as a release agent in sub...view more Release W40 GB3 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 7-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB3 is most commonly used as a release agent in substrate coatings where contact with hot-melt and solvent-based adhesives is common. view less | |
| Release W40 GB6 LV | Ichemco | Release W40 GB6 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 8-9, and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB6 LV is most commonly used as a release agent in ...view more Release W40 GB6 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 8-9, and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB6 LV is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release WF 30 | Ichemco | Release WF 30 is a water-based release agent based on acrylic polymers. This product has a total solids content of 29-31%, a pH of 3-5, and a Brookfield viscosity at 25°C of 20-70 mPa.s. Release WF 30 is most commonly used as a release agent in technical ...view more Release WF 30 is a water-based release agent based on acrylic polymers. This product has a total solids content of 29-31%, a pH of 3-5, and a Brookfield viscosity at 25°C of 20-70 mPa.s. Release WF 30 is most commonly used as a release agent in technical tape applications. view less | |
| S-400-N1 (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | S-400 N1 is a micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N1 is recommended for powder, water-based, solvent-based, and UV systems. | |
| S-400-N5 (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | S-400 N5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 99 – 147°C. S-400-N5 is recommended for powder, water-based, solvent-based and UV systems. | |
| S-400-SP5 (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | S-400 SP5 is a micronized EBS (ethylene bissteramide) wax powder showing melting peaks ranging from 107 – 145°C. S-400-SP5 is recommended for powder, leather, water-based, solvent-based and UV systems. | |
| SILICONE FLUID ATPN-100 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICON...view more SILICONE FLUID ATPN-100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100 mm2 /s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-100 is ideal for use in a wide range of applications. view less | |
| SILICONE FLUID ATPN-1000 | Beijing Entrepreneur Science &Trading Co., Ltd. | SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICO...view more SILICONE FLUID ATPN-1000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1 000 mm2/s. Due to its chemical structure, it has an outstanding property profile, which sets it apart from organic materials such as mineral oils. SILICONE FLUID ATPN-1000 is ideal for use in a wide range of applications. view less | |
| TEGO® Cure 100 | Evonik Operations GmbH, BL Coating Additives | TEGO® Cure 100 is a reactive ambient curing polysiloxane resin, pre-catalysed with amines, for the use as hardener. | Request Sample |
| TEGO® Rad 2650 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2650 is a highly effective release additive for radiation-curing formulations. It is a radically cross-linkable, clear to slightly hazy liquid silicone acrylate. TEGO® Rad 2650 can be used for radiation-curing printing inks and overprint varnish...view more TEGO® Rad 2650 is a highly effective release additive for radiation-curing formulations. It is a radically cross-linkable, clear to slightly hazy liquid silicone acrylate. TEGO® Rad 2650 can be used for radiation-curing printing inks and overprint varnishes, silk screen inks, and (litho) offset printing inks. It improves scratch and marker resistance with additional slip and deaerating activity. Addition of this product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2650. view less | Request Sample |
| TEGO® Rad 2700 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2700 is a radically crosslinkable release and glide additive with utmost effectiveness. It is hazy liquid silicone acrylate with a very high slip and release effect. Phase separation may occur during storage of the product, but can be remixed by...view more TEGO® Rad 2700 is a radically crosslinkable release and glide additive with utmost effectiveness. It is hazy liquid silicone acrylate with a very high slip and release effect. Phase separation may occur during storage of the product, but can be remixed by stirring. The application properties of the product are not affected by the seperation. Addition of the product to the coating can be as supplied or as a predilution. Predilution in a suitable solvent simplifies dosage and incorporation of TEGO® Rad 2700. view less | Request Sample |
| TEGO® Rad 2800 | Evonik Operations GmbH, BL Coating Additives | TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has ...view more TEGO® Rad 2800 is a new release additive for printing inks and varnishes. It has the highest release effect in the Rad portfolio, and therefore takes a further step in completing the range of radiation-curing glide and release additives. This product has a pronounced silicone character, combining strong hydrophobing properties with optimum system compatibility. view less | Request Sample |
