| Anti-blocking agent ER | Yantai Suny Chem International Co., Ltd. | Anti-blocking agent ER is a white waxy solid, which is including long-chain carbon and polar amide group in molecular structure. It is not soluble in water, but can be soluble in ethanol, ether, acetone, and xylene, etc. | |
| Boehmite for Lithium-ion Battery Separator B8014-L4 | Tianjin Boyuan New Materials Co., Ltd. | B8014-L4 is a boehmite powder with small particle size, high temperature resistance, and low hardness. It can be used as a coating on Lithium-ion battery separators. | |
| BRB Siloen® SR 313 | BRB International BV | BRB Siloen® SR 313 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 379 | BRB International BV | BRB Siloen® SR 379 is a hard methyl silicone resin 50% active in organic solvents. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 379N | BRB International BV | BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat r...view more BRB Siloen® SR 379N is a medium hard methyl silicone resin; when dried at room temperature, it is a bit softer than BRB Siloen® SR 379 and has some more tacky residue. After baking, hardness is practically equivalent. It can be used as a binder for heat resistant and anti-corrosive paints. view less | |
| BRB Siloen® SR 383 | BRB International BV | BRB Siloen® SR 383 is a medium hard methyl phenyl silicone resin for heat resistant paints. It can be used as a binder for heat resistant and anti-corrosive paints. | |
| BRB Siloen® SR 833 | BRB International BV | BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used...view more BRB Siloen® SR 833 is a solventless, solvent thinnable alkoxy methyl silicone oligomer. It is suitable as ambient moisture cure binder for the manufacture of heat resistant coatings. In combination with suitable catalyst, pigments and fillers, can be used for ambient curing heat resistant paint. (Automotive parts, industrial coatings, ovens, stoves and barbecues). view less | |
| CV-1144-0 | NuSil Silicone Technology 1 | CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space appl...view more CV-1144-0 is an oxygen protective silicone overcoat that is used for applications where extremely low temperatures and low outgassing are a hazard. It functions as a protective overcoating for electric components and atomic oxygen resistance in space applications. This product also has a broad operating temperature range and can provide radiation and thermal stress resistance. view less | |
| CV-1146-2 | NuSil Silicone Technology 1 | CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating...view more CV-1146-2 is a one part, flat black silicone dispersion that meets outgas specifications outlined in NASA and the European Space Agency. It is an ideal product to use in space and electrical applications that require low outgassing under extreme operating conditions. It also provides an atomic oxygen protection and resistance to radiation and thermal stress. view less | |
| CV-1148 | NuSil Silicone Technology 1 | CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlin...view more CV-1148 is a silicone atomic oxygen protective coating that can be use at a broad temperature range. This product is best used for applications that require low outgassing under extreme operating conditions. It exceeds the low outgas specifications outlined by NASA and the European Space Agency. view less | |
| CV1-1144-0 | NuSil Silicone Technology 1 | CV1-1144-0 is a one-part silicone dispersion that functions as a protective overcoating for atomic oxygen resistance in space applications. Due to its non-corrosive nature, it is ideal for coating electronic components and provides resistance against radi...view more CV1-1144-0 is a one-part silicone dispersion that functions as a protective overcoating for atomic oxygen resistance in space applications. Due to its non-corrosive nature, it is ideal for coating electronic components and provides resistance against radiation and thermal stress. This product meets the lo outgas specifications outlined in NASA and the European Space Agency. view less | |
| CV2-1147 | NuSil Silicone Technology 1 | CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitabl...view more CV2-1147 is a silicone atomic oxygen protective coating that can be used in applications that require a broad operating temperature range. This coating will help protect electrical components from radiation and thermal stress. This product is also suitable to use in applications that require low outgassing in extreme operating conditions. view less | |
| EXOCOAT™ SH | Axcentive Sarl | EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pave...view more EXOCOAT® SH by Axcentive is an inorganic 1K superhydrophobic Sol-Gel system for breathable concrete and masonry sealers. It has extremely high water exclusion properties which helps to produce superhydrophobic coatings. It can be applied on concrete, pavement, walls, and stucco to get the so-called Lotus Effect. The sol-gel system deposits superhydrophobic particles on the porous substrate. EXOCOAT® SH will not form a film and as a result, the wall stays breathable. With the contact angle of 145o water droplets bounce back from the surface and will roll down immediately upon touch. Thus, the wall remains dry, and clean and will behave as an efficient barrier against water. view less | |
| Hydropel AF (EBS Wax Powder) | Shamrock Technologies b.v.b.a. | Hydropel AF is a micronized EBS (ethylene bisstearamide) wax powder showing multiple melting peaks ranging from 91 – 145°C. | |
| IGI® 1297A | The International Group, Inc. (IGI Wax) | IGI® 1297A is a fully refined paraffin wax with excellent heat stability. | |
| Industrial Grade Zinc Oxide | Beijing Entrepreneur Science &Trading Co., Ltd. | Industrial Grade Zinc Oxide is a white, small grain zinc oxide used in production of products like Zinc stearate, zinc bromide, zinc borate, phosphatizing liquid, as well as used in preparation of electroplate liquid. | |
| MICROSERE® 5896A | The International Group, Inc. (IGI Wax) | MICROSERE® 5896A is a coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5897A | The International Group, Inc. (IGI Wax) | MICROSERE® 5897A is a light colored, coating-grade, high melt, microcrystalline wax used in a variety of applications including; adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5909A | The International Group, Inc. (IGI Wax) | MICROSERE® 5909A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5910A | The International Group, Inc. (IGI Wax) | MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles. | |
| MICROSERE® 5999A | The International Group, Inc. (IGI Wax) | MICROSERE® 5999A is an amber colored microcrystalline wax with hard consistency and a high melting point. | |
| Phenyl Silane Oligomer Sunicon 6141 | Yantai Suny Chem International Co., Ltd. | Phenyl Silane Oligomer Sunicon 6141 can provide heat resistance, cold resistance, radiation resistance, weather resistance, rigidity, flame retardant. As an adhesion promoter, it is especially suitable for oil-based systems. It can be used as hydrophobic ...view more Phenyl Silane Oligomer Sunicon 6141 can provide heat resistance, cold resistance, radiation resistance, weather resistance, rigidity, flame retardant. As an adhesion promoter, it is especially suitable for oil-based systems. It can be used as hydrophobic treatment agent and lubricant for powder. More applications in adhesives, powder coatings, building materials coatings, modification. view less | |
| ProHere® I 13001 | Michelman | ProHere® I 13001 is a polyimide solution designed for metal coatings that need to deal with extremely high temperatures. It provides good adhesion, very high chemical resistance, very high mechanical strength and excellent high temperature resistance. | |
| ProHere® I 13002 | Michelman | ProHere® I 13002 is a polyimide solution designed for metal coatings that need to deal with extremely high temperatures. It provides good adhesion, very high chemical resistance, very high mechanical strength and excellent high temperature resistance. | |
| ROPOL PC-11 | DKSH | ROPOL PC-11 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is Polycarbonated based on 1,6 Hexanediol enables to obtain high performance in polyurethane preparations, improving weather, heat and hydrolysis resistance. This product...view more ROPOL PC-11 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is Polycarbonated based on 1,6 Hexanediol enables to obtain high performance in polyurethane preparations, improving weather, heat and hydrolysis resistance. This product is available for Europe and Asia. view less | Request Sample |
| ROPOL PC-12 | DKSH | ROPOL PC-12 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is a Polycarbonated based on 1,6 Hexanediol enables to obtain high performance polyurethane preparations, improving weather, heat and hydrolysis resistance. This product ...view more ROPOL PC-12 is a 1,6 Hexanediol Polycarbonatediols copolymers. It's main application is a Polycarbonated based on 1,6 Hexanediol enables to obtain high performance polyurethane preparations, improving weather, heat and hydrolysis resistance. This product is available for Europe and Asia. view less | Request Sample |
| SCHWEGO® therm | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® therm is a wetting additive for solvent based coating systems. The addition of this product to coatings increases the finger nail hardness of films while at the same time it reduces the stoving time or makes it possible to reduce the stoving temp...view more SCHWEGO® therm is a wetting additive for solvent based coating systems. The addition of this product to coatings increases the finger nail hardness of films while at the same time it reduces the stoving time or makes it possible to reduce the stoving temperature, i.e. SCHWEGO® therm offers more economic processing conditions coupled with higher quality. This product can be used in many types of solvent-based systems such as metal finishes and wood finishes. view less | |
| SST®-5D (PTFE Micropowder) | Shamrock Technologies b.v.b.a. | SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and ...view more SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and UV coating systems. view less |
