| KRATON® D1192 BT Polymer | Kraton Polymers International Ltd. | KRATON® D1192 BT Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardn...view more KRATON® D1192 BT Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 BT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1192 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ES Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide ra...view more KRATON® D1192 ES Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1192 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ESM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of ...view more KRATON® D1192 ESM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1192 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardn...view more KRATON® D1192 ET Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1192 ETM Polymer | Kraton Polymers International Ltd. | KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, an...view more KRATON® D1192 ETM Polymer is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1192 ETM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D1193 PT Polymer | Kraton Polymers International Ltd. | KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low v...view more KRATON® D1193 PT Polymer is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, low hardness, and low viscosity for easy thermoplastic processing as a melt or in solution. KRATON® D1193 PT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D2104 DI-N Polymer | Kraton Polymers International Ltd. | KRATON® D2104 DI-N Polymer is an easy processing, general purpose material designed for a wide variety of applications. It is supplied as translucent dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and...view more KRATON® D2104 DI-N Polymer is an easy processing, general purpose material designed for a wide variety of applications. It is supplied as translucent dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D2104 DI-N Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D2104 DO-N Polymer | Kraton Polymers International Ltd. | KRATON® D2104 DO-N Polymer is an easy processing, 50 Shore A hardness material designed for film applications. It is supplied as natural color pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosit...view more KRATON® D2104 DO-N Polymer is an easy processing, 50 Shore A hardness material designed for film applications. It is supplied as natural color pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D2104 DO-N Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D2104 DS-W Polymer | Kraton Polymers International Ltd. | KRATON® D2104 DS-W Polymer is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as dense, white pellets. This product is versatile with a combination of high strength, wide range o...view more KRATON® D2104 DS-W Polymer is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as dense, white pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D2104 DS-W Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D2109 DS-N Compound | Kraton Polymers International Ltd. | KRATON® D2109 DS-N Compound is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as a translucent dense pellet. This product is versatile with a combination of high strength, wide ...view more KRATON® D2109 DS-N Compound is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied as a translucent dense pellet. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D2109 DS-N Compound is used in pressure sensitive adhesives, hot melt spray diaper adhesives, and construction adhesives. view less | |
| KRATON® D3158 DT-B Polymer | Kraton Polymers International Ltd. | KRATON® D3158 DT-B Polymer is a branched copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low v...view more KRATON® D3158 DT-B Polymer is a branched copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted, porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D3158 DT-B Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D3226 DI Polymer | Kraton Polymers International Ltd. | KRATON® D3226 DI Polymer is an easy processing material designed for a wide variety of applications. It is supplied as natural color pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy...view more KRATON® D3226 DI Polymer is an easy processing material designed for a wide variety of applications. It is supplied as natural color pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D3226 DI Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D4150 KT Polymer | Kraton Polymers International Ltd. | KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...view more KRATON® D4150 KT Polymeris a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KT Polymer is used in pressure sensitive adhesives, hot melt spray, diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D4150 KU Polymer | Kraton Polymers International Ltd. | KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, a...view more KRATON® D4150 KU Polymer is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4150 KU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D4153 ES Polymer | Kraton Polymers International Ltd. | KRATON® D4153 ES Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as porous pellets dusted with an amorphous silica. This product is versatile with a combin...view more KRATON® D4153 ES Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as porous pellets dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4153 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D4153 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D4153 ESM Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as powder dusted with an amorphous silica. This product is versatile with a combination o...view more KRATON® D4153 ESM Polymer is an oil-extended linear block copolymer based on styrene and butadiene with bound styrene in the neat polymer of 35% mass. It is supplied as powder dusted with an amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4153 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D4158 KT Polymer | Kraton Polymers International Ltd. | KRATON® D4158 KT Polymer is an oiled, radial copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and lo...view more KRATON® D4158 KT Polymer is an oiled, radial copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4158 KT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® D4158 KU Polymer | Kraton Polymers International Ltd. | KRATON® D4158 KU Polymer is an oiled, radial copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, an...view more KRATON® D4158 KU Polymer is an oiled, radial copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D4158 KU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® DX1000 AU Polymer | Kraton Polymers International Ltd. | KRATON® DX1000 AU Polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 9% mass. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...view more KRATON® DX1000 AU Polymer is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 9% mass. It is supplied as non-dusted porous pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® DX1000 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, coatings, and sealants. view less | |
| KRATON® FG1901 GT Polymer | Kraton Polymers International Ltd. | KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...view more KRATON® FG1901 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1901 GT Polymer is used in adhesives, coatings, and sealants. view less | |
| KRATON® FG1924 GT Polymer | Kraton Polymers International Ltd. | KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene ...view more KRATON® FG1924 GT Polymer is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 13%. It is supplied as dusted pellets. This product is used in the production of adhesives for nylon, polyester, ethylene vinyl alcohol, aluminum, steel, glass, and many other substrates. KRATON® FG1924 GT Polymer is used in adhesives, coatings, and sealants. view less | |
| LIOPUR PKS 2845 | Synthopol Chemie Germany | LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s fl...view more LIOPUR PKS 2845 is a solvent-free, aqueous, aliphatic polyurethane dispersion based on a polyether, APEO- and TEA-free. After air-drying coatings based on LIOPUR PKS 2845 form transparent films which are tacky at room temperature. Because of the film’s flexibility, even at low temperatures and resistance to hydrolysis LIOPUR PKS 2845 is especially recommended for making contact adhesives with good peel strength, used to laminate a wide range of materials. view less | |
| Lumicryl® 1928 | Estron Chemical, Inc. | Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-form...view more Lumicryl® 1928 is a 100% solids resin composition based upon a reactive acrylic macromer diluted in TCDDMDA1. Lumicryl® 1928 is designed to provide excellent adhesion to both low and high surface energy substrates, and may be used as the primary film-forming component or as an adhesion promoting additive in UV/EB formulations for various applications. view less | |
| Makrovil D 343 | Indulor Chemie GmbH | Makrovil D 343 is a styrene-acrylic copolymer emulsion. It is a binder with very good water and alkali resistance, excellent flexibility, and very good pigment wetting power. Makrovil D 343 is used in emulsion paints and plasters, concrete coatings, lutes...view more Makrovil D 343 is a styrene-acrylic copolymer emulsion. It is a binder with very good water and alkali resistance, excellent flexibility, and very good pigment wetting power. Makrovil D 343 is used in emulsion paints and plasters, concrete coatings, lutes and filling compounds, and building adhesives. view less | |
| Makrovil D 3630 | Indulor Chemie GmbH | Makrovil D 3630 is an emulsion polymer based on styrene and acrylates. It is a binder with excellent flexibility and very good alkali resistance. Makrovil D 3630 is used in sealants, mortars and plasters, fillers, and architectural coatings. | |
| Makrovil D 8640 | Indulor Chemie GmbH | Makrovil D 8640 is an emulsion polymer based on styrene and acrylates. It is a binder with high water resistance. Makrovil D 8640 is used in paints, fillers, tile adhesives, and plasters. | |
| Makrovil PAC 617 | Indulor Chemie GmbH | Makrovil PAC 617 is an acrylic polymer emulsion. It is a binder with excellent penetration, very good strengthening of substrate, excellent freeze/thaw stability, and is finely dispersed. Makrovil PAC 617 is used in water-based sealing primers. | |
| Makrovil PVA 0530 | Indulor Chemie GmbH | Makrovil PVA 0530 is an aqueous solution of a low molecular polyvinyl alcohol. It is a cobinder and binder. This product has excellent flow behavior, turbid film, and a very good transfer property. Makrovil PVA 0530 is used in adhesives, architectural coa...view more Makrovil PVA 0530 is an aqueous solution of a low molecular polyvinyl alcohol. It is a cobinder and binder. This product has excellent flow behavior, turbid film, and a very good transfer property. Makrovil PVA 0530 is used in adhesives, architectural coatings, wood finishing applications, and artist's colors. view less | |
| Makrovil PVA 1025 | Indulor Chemie GmbH | Makrovil PVA 1025 is an aqueous solution of a low molecular polyvinyl alcohol. It is a cobinder and binder. This product has excellent flow behavior, turbid film, very good transfer properties, excellent pigment binding power, and very good solvent resist...view more Makrovil PVA 1025 is an aqueous solution of a low molecular polyvinyl alcohol. It is a cobinder and binder. This product has excellent flow behavior, turbid film, very good transfer properties, excellent pigment binding power, and very good solvent resistance. Makrovil PVA 1025 is used in adhesives, architectural coatings, wood finishing applications, and artist's colors. view less | |
| Makrovil PVA 2310 | Indulor Chemie GmbH | Makrovil PVA 2310 is an aqueous solution of a medium molecular polyvinyl alcohol. It is a cobinder. This product has excellent flow behavior, transparent film, very good transfer properties, excellent pigment binding power, and very high solvent resistanc...view more Makrovil PVA 2310 is an aqueous solution of a medium molecular polyvinyl alcohol. It is a cobinder. This product has excellent flow behavior, transparent film, very good transfer properties, excellent pigment binding power, and very high solvent resistance. Makrovil PVA 2310 is used in adhesives, architectural coatings, paper finishing, and wood finishing applications. view less | |
| Makrovil V 344 | Indulor Chemie GmbH | Makrovil V 344 is an homopolymeric emulsion based on vinyl acetate. It is a binder and raw material for wood and paper adhesives. This product has very high solubility in water. Makrovil V 344 is used in wood and paper adhesives, textile finishing, and ad...view more Makrovil V 344 is an homopolymeric emulsion based on vinyl acetate. It is a binder and raw material for wood and paper adhesives. This product has very high solubility in water. Makrovil V 344 is used in wood and paper adhesives, textile finishing, and adhesives. view less | |
| Millionate® MR-100 | Tosoh Corporation | Millionate® MR-100, in the form of a brownish liquid, contains polymerized-MDI and pure-MDI. It is applicable in elastomers, adhesives, and coatings and is largely used in spray foam applications. | |
| Millionate® MR-200 | Tosoh Corporation | Millionate® MR-200, in the form of a brownish liquid, contains polymerized-MDI and pure-MDI. It is applicable in elastomers, adhesives, and coatings and is largely used in spray foam applications. | |
| Millionate® MR-200S | Tosoh Corporation | Millionate® MR-200S, in the form of a brownish liquid, contains polymerized-MDI and pure-MDI. It is applicable in elastomers, adhesives, and coatings and is largely used in spray foam applications. | |
| Millionate® MR-400 | Tosoh Corporation | Millionate® MR-400, in the form of a brownish liquid, contains polymerized-MDI and pure-MDI. It is applicable in elastomers, adhesives, and coatings and is largely used in spray foam applications. | |
| Millionate® MT | Tosoh Corporation | Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and art...view more Millionate® MT, in the form of a white or yellowish white solid, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. view less | |
| Millionate® MT-F | Tosoh Corporation | Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and a...view more Millionate® MT-F, in the form of a white or yellowish white flake, is an aromatic diisocyanate that is appropriate for the preparation of liner polymers by reaction with diamines and diols. It is also used for the production of elastomers, synthetic and artificial leather, adhesives, and coatings. view less | |
| Mowinyl 6530 | Nippon Gohsei | Mowinyl 6530 is a synthetic acrylic resin emulsion that provides good adherence to various substrates, as well as good heat, water, alkaline, and blocking resistances. This product is well suited for use in paints and coatings for metal surface applicatio...view more Mowinyl 6530 is a synthetic acrylic resin emulsion that provides good adherence to various substrates, as well as good heat, water, alkaline, and blocking resistances. This product is well suited for use in paints and coatings for metal surface applications. view less | |
| Mowinyl 6720 | Nippon Gohsei | Mowinyl 6720 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to films and topcoats, this product is well suited for use in primer and sealer applications. | |
| Mowinyl 743N | Nippon Gohsei | Mowinyl 743N is a synthetic acrylic resin emulsion that provides good adherence and alkaline resistance. This product is well suited for use in primers, sealers, paints, and coatings. | |
| Mowinyl 745 | Nippon Gohsei | Mowinyl 745 is a synthetic acrylic resin emulsion with an added auxiliary filming agent. This product is well suited for use in clear coats, sealers, and gloss varnishes for paper. | |
| Mowinyl 880 | Nippon Gohsei | Mowinyl 880 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. Featuring good miscible stability with colloidal silica, this product is well suited for use in clear coat and sealer applications. | |
| Mowinyl 940 | Nippon Gohsei | Mowinyl 940 is a water-based synthetic resin emulsion composed of a styrene/acrylic copolymer. With good adherence to base materials, this product is well suited for use in primer and sealer applications. | |
| MR-103 | LUKEM D.O.O. | MR-103 is a gum rosin modified maleic resin that exhibits good stability in water. With a softening point of 85ºC, the product is intended for use as a sizing agent and in adhesives. | |
| MR-105 | LUKEM D.O.O. | MR-105 is a gum rosin modified maleic resin that exhibits good stability in water. With a softening point of 90ºC, the product is intended for use as a sizing agent and in adhesives. | |
| MR-107 | LUKEM D.O.O. | MR-107 is a gum rosin modified maleic resin that exhibits good stability in water. With a softening point of 95ºC, the product is intended for use as a sizing agent and in adhesives. | |
| MR-115 | LUKEM D.O.O. | MR-115 is a gum rosin modified maleic resin with a high SP that exhibits good stability in water. With a softening point of 108ºC, the product is intended for use as a sizing agent and in adhesives. | |
| MR-424 | LUKEM D.O.O. | MR-424 is a gum rosin modified maleic resin. The product has a stable color and exhibits good heat resistance and adhesion. With a softening point between 120ºC and 130ºC, MR-424 is intended for use in paints, inks, and adhesives. | |
| MTD100 | Guangxi Zhongchang Resin Co., Ltd. | MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...view more MTD100 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. view less | |
| MTD100W | Guangxi Zhongchang Resin Co., Ltd. | MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...view more MTD100W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 90-100ºC. It can also be applied to coating and printing ink. view less | |
| MTD120 | Guangxi Zhongchang Resin Co., Ltd. | MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...view more MTD120 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. view less | |
| MTD120W | Guangxi Zhongchang Resin Co., Ltd. | MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...view more MTD120W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 120-130ºC. It can also be applied to coating and printing ink. view less | |
| MTD150 | Guangxi Zhongchang Resin Co., Ltd. | MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying...view more MTD150 is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. view less | |
| MTD150W | Guangxi Zhongchang Resin Co., Ltd. | MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifyin...view more MTD150W is a light yellow flaky solid and a terpene-phenolic resin obtained by catalytic polymerization of turpentine or α-pinene with phenol. This product is used to improve extension and flexibility of adhesive through greater heat-resistance, tackifying and a softening point between 145-160ºC. It can also be applied to coating and printing ink. view less | |
| n-Propanol | DCC (Dairen Chemical Corp.) | n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether...view more n-Propanol is a by-product which is produced by hydro-formulation and hydrogenation of Allyl Alcohol, carbon monoxide, and hydrogen. It is a medium boiling point, colorless liquid and has a typical alcohol odor, and is soluble in water, alcohol, and ether. n-Propanol is used in solvents, as an intermediate chemical for synthesis, industrial coatings, adhesives, and printing inks. view less | |
| Neboplast® SB 8565 | NECARBO B.V. | Neboplast® SB 8565 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is plasticizer and APE free, has pigment binding properties, and forms a flexible film. Neboplast® SB 8565 finds use as a water-based wall paint binders s...view more Neboplast® SB 8565 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is plasticizer and APE free, has pigment binding properties, and forms a flexible film. Neboplast® SB 8565 finds use as a water-based wall paint binders such as in the formulation of indoor and outdoor wall paints with scrub resistance, and in roof coating formulations, sealants, mineral substrate adhesives, and crack-bridging applications. view less | |
| Neboplast® SB 8750 | NECARBO B.V. | Neboplast® SB 8750 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake and whitening, is alkali and water resistant, and has pigment binding properties. Nebo...view more Neboplast® SB 8750 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake and whitening, is alkali and water resistant, and has pigment binding properties. Neboplast® SB 8750 finds use in the formulation of indoor and outdoor coatings from low to high PVC, and in sealants, adhesives, and roof coatings. view less | |
| Neboplast® SB 8757 | NECARBO B.V. | Neboplast® SB 8757 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate, plasticizer, and ammonia free, and is alkali and water resistant. Neboplast® SB 8757 finds use in the formulation of top quality...view more Neboplast® SB 8757 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate, plasticizer, and ammonia free, and is alkali and water resistant. Neboplast® SB 8757 finds use in the formulation of top quality indoor and outdoor emulsion wall paints, roof coating formulations, sealants, mineral substrate adhesives, and cement modification. view less | |
| Neboplast® SB 8765 | NECARBO B.V. | Neboplast® SB 8765 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake, pigment binding properties, and is alkali and water resistant. Neboplast® SB 8765 for...view more Neboplast® SB 8765 is an aqueous dispersion of an acrylic ester-styrene copolymer. This white liquid is alkylphenolethoxylate and plasticizer free, has low water uptake, pigment binding properties, and is alkali and water resistant. Neboplast® SB 8765 forms a flexible film and finds application in the formulation of indoor and outdoor coatings, sealants, adhesives, and crack-binding systems. view less | |
| Neboplast® VA 1009 | NECARBO B.V. | Neboplast® VA 1009 is a large particle size vinylacetate homopolymer dispersion. This white liquid is a PVAc dispersion binder that provides low viscosity, fast tack, substrate penetration, is plasticizer free and widely compatible with thickeners. Nebopl...view more Neboplast® VA 1009 is a large particle size vinylacetate homopolymer dispersion. This white liquid is a PVAc dispersion binder that provides low viscosity, fast tack, substrate penetration, is plasticizer free and widely compatible with thickeners. Neboplast® VA 1009 forms hard and brittle films and finds application in carpet backings where impregnation and strong binding is required, and in quick tacking glues and textile impregnants. view less | |
| Neboplast® VA 1050 | NECARBO B.V. | Neboplast® VA 1050 is a re-emulsifiable polyvinyl acetate dispersion. This white liquid is a PVAc dispersion binder that is plasticizer free and has low viscosity. Neboplast® VA 1050 finds application in adhesives where re-emulsification properties are re...view more Neboplast® VA 1050 is a re-emulsifiable polyvinyl acetate dispersion. This white liquid is a PVAc dispersion binder that is plasticizer free and has low viscosity. Neboplast® VA 1050 finds application in adhesives where re-emulsification properties are required such as envelope and stamp glues, and in textile apprets. view less | |
| Neboplast® VA 9030 | NECARBO B.V. | Neboplast® VA 9030 is a vinylacetate homopolymer dispersion. This white liquid is a PVAc dispersion binder that has medium viscosity and is plasticizer free. Neboplast® VA 9030 produces brittle films and can be used for the formulation of adhesives used i...view more Neboplast® VA 9030 is a vinylacetate homopolymer dispersion. This white liquid is a PVAc dispersion binder that has medium viscosity and is plasticizer free. Neboplast® VA 9030 produces brittle films and can be used for the formulation of adhesives used in the paper and cardboard industry. view less | |
| Neboplast® VAP 1521 | NECARBO B.V. | Neboplast® VAP 1521 is a medium viscosity, phthalate-free, externally plasticized polyvinylacetate dispersion that provides good tack and holdout properties. This product finds application in packaging & cardboard adhesives, simple paint formulations, tex...view more Neboplast® VAP 1521 is a medium viscosity, phthalate-free, externally plasticized polyvinylacetate dispersion that provides good tack and holdout properties. This product finds application in packaging & cardboard adhesives, simple paint formulations, textile finishing applications, and cement mortar additives. view less | |
| Neboplast® VM 2786 | NECARBO B.V. | Neboplast® VM 2786 is a copolymer dispersion of vinyl acetate and maleic esters. This white liquid is a PVAc dispersion binder that has low MF, outdoor and wet scrub resistance, and high pigment binding properties. Neboplast® VM 2786 forms a flexible film...view more Neboplast® VM 2786 is a copolymer dispersion of vinyl acetate and maleic esters. This white liquid is a PVAc dispersion binder that has low MF, outdoor and wet scrub resistance, and high pigment binding properties. Neboplast® VM 2786 forms a flexible film and finds application as a dispersion in paints, plasters, and glue formulations. view less | |
| Neboplast® VV 2180 | NECARBO B.V. | Neboplast® VV 2180 is an aqueous vinyl acetate and vinyl versatate copolymer dispersion. This white liquid is a PVAc dispersion binder with alkali resistance and flexibility. It is compatible with commonly used fillers, pigments, and plasticizers, and is ...view more Neboplast® VV 2180 is an aqueous vinyl acetate and vinyl versatate copolymer dispersion. This white liquid is a PVAc dispersion binder with alkali resistance and flexibility. It is compatible with commonly used fillers, pigments, and plasticizers, and is generally used in the building industry. Neboplast® VV 2180 finds application as a binder for wall paints, plasters, and tile adhesives. view less | |
| Neboplast® VV 2182 | NECARBO B.V. | Neboplast® VV 2182 is a vinyl acetate and vinyl versatate copolymer dispersion that provides very good alkali resistance, excellent pigment binding properties, and good thixotropic structure. This product was developed for use in thick layer applications ...view more Neboplast® VV 2182 is a vinyl acetate and vinyl versatate copolymer dispersion that provides very good alkali resistance, excellent pigment binding properties, and good thixotropic structure. This product was developed for use in thick layer applications such as plasters, spackles, wall paints, primers, sealers, and mortars. view less | |
| Nichigo-Polyester HR-0038 | Nippon Gohsei | Nichigo-Polyester HR-0038 is a high molecular weight saturated polyester resin that features a high refractive index and good heat and humidity resistance. This product is well suited for use in a wide variety of applications, including coatings and prime...view more Nichigo-Polyester HR-0038 is a high molecular weight saturated polyester resin that features a high refractive index and good heat and humidity resistance. This product is well suited for use in a wide variety of applications, including coatings and primers, film and label adhesives, and printing paper applications. view less | |
| Nichigo-Polyester LP011 | Nippon Gohsei | Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and ...view more Nichigo-Polyester LP011 is a high molecular weight saturated polyester resin that features good solution stability. This product is well suited for use in a wide variety of applications, including laminates and adhesives, inks, can and coil coatings, and magnetic paints. view less | |
| Nichigo-Polyester LP033 | Nippon Gohsei | Nichigo-Polyester LP033 is a high molecular weight saturated polyester resin featuring good metal adhesion. This product is well suited for use in coatings, primers, laminates, and polyester adhesives. | |
| Nichigo-Polyester LP035 | Nippon Gohsei | Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applicatio...view more Nichigo-Polyester LP035 is a high molecular weight saturated polyester resin featuring good weather and chemical resistance. This product is well suited for use in electronic and plastic coatings, laminates, polyester adhesives, and PVC backing applications. view less | |
| Nichigo-Polyester TP219 | Nippon Gohsei | Nichigo-Polyester TP219 is a low molecular weight saturated polyester resin that is well suited for use in optical adhesives and general and electronic coating applications. | |
| Nichigo-Polyester TP220 | Nippon Gohsei | Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester a...view more Nichigo-Polyester TP220 is a high molecular weight saturated polyester resin with a high glass transition temperature (Tg). This product is well suited for use in general and electronic coatings, adhesive films and labels, primers, optical and polyester adhesives, and PVC backing materials. view less | |
| Nichigo-Polyester TP235 | Nippon Gohsei | Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhes...view more Nichigo-Polyester TP235 is a high molecular weight saturated polyester resin. It is formulated to have good adhesion with ultraviolet (UV) inks. This product is well suited for use in coatings and primers for plastics and electronics, film and label adhesives, polyester adhesives, and PVC backing materials. view less | |
| Nichigo-Polyester TP236 | Nippon Gohsei | Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC bac...view more Nichigo-Polyester TP236 is a high molecular weight saturated polyester resin featuring good pigment dispersion. This product is well suited for use in plastic and electronic coatings and primers, adhesive films and labels, polyester adhesives, and PVC backing materials. view less | |
| Nichigo-Polyester TP249 | Nippon Gohsei | Nichigo-Polyester TP249 is a high molecular weight saturated polyester resin featuring good dispersibility of magnetic elements. This product is well suited for use in plastic and electronic coatings and optical adhesives. | |
| Nichigo-Polyester W-0030 | Nippon Gohsei | Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coati...view more Nichigo-Polyester W-0030 is a high molecular weight saturated polyester resin featuring a high acid value, good adhesion, and good heat and humidity resistance. This product is well suited for use in adhesive films and labels, plastic and electronic coatings and primers, and optical adhesives. view less | |
| Nichigo-Polyester WR-901 | Nippon Gohsei | Nichigo-Polyester WR-901 is a high molecular weight saturated polyester resin featuring good heat and humidity resistance, as well as good ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic ...view more Nichigo-Polyester WR-901 is a high molecular weight saturated polyester resin featuring good heat and humidity resistance, as well as good ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. view less | |
| Nichigo-Polyester WR-905 | Nippon Gohsei | Nichigo-Polyester WR-905 is a high molecular weight saturated polyester resin featuring good solution stability and ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, a...view more Nichigo-Polyester WR-905 is a high molecular weight saturated polyester resin featuring good solution stability and ultraviolet (UV) ink printability. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. view less | |
| Nichigo-Polyester WR-961 | Nippon Gohsei | Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and la...view more Nichigo-Polyester WR-961 is a high molecular weight saturated polyester resin featuring good adhesion and humidity resistance. This product is well suited for use in optical adhesives, plastic and electronic coatings and primers, and adhesive films and labels. view less | |
| Nippolan 2304 | Tosoh Corporation | Nippolan 2304 is a two-component polyurethane adhesive in a methyl ethyl ketone solvent. This product is ideal for use in ink vehicle applications. | |
| Nippolan 3004 | Tosoh Corporation | Nippolan 3004 is a polyurethane adhesive and tacking agent in an ethyl acetate solvent. This product is that is ideal for use in film lamination applications. | |
| Nippolan 3016 | Tosoh Corporation | Nippolan 3016 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in industrial material applications. | |
| Nippolan 3110 | Tosoh Corporation | Nippolan 3110 is a one-component polyurethane adhesive in toluene, acetone, and methyl ethyl ketone solvents. This product is ideal for use in plastic film (PVC, PET, PP, etc.) applications. | |
| Nippolan 3114 | Tosoh Corporation | Nippolan 3114 is a two-component polyurethane adhesive in methyl ethyl ketone and toluene solvents. This product is ideal for use in plastic film (PVC, PET, PP, etc.) applications. | |
| Nippolan 3116 | Tosoh Corporation | Nippolan 3116 is a one-component polyurethane adhesive in methyl ethyl ketone, toluene, acetone, and dimethylformamide solvents. This product is ideal for use in leather applications, including shoes. | |
| Nippolan 3124 | Tosoh Corporation | Nippolan 3124 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in dry lamination applications. | |
| Nippolan 3126 | Tosoh Corporation | Nippolan 3126 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in dry lamination applications. | |
| Nippolan 3219 | Tosoh Corporation | Nippolan 3219 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in dry lamination applications. | |
| Nippolan 3230 | Tosoh Corporation | Nippolan 3230 is a two-component polyurethane adhesive in an ethyl acetate solvent. This product is ideal for use in dry lamination applications. | |
| nolax A21.2007 | nolax AG (Vanora) | nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 h...view more nolax A21.2007 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007 has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2007-S | nolax AG (Vanora) | nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007...view more nolax A21.2007-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film based on modified polyolefines and can be processed with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2007-S has a melting point of 80 to 90°C, relative density of 0.94 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 | nolax AG (Vanora) | nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a meltin...view more nolax A21.2008 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008 has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2008 S | nolax AG (Vanora) | nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a me...view more nolax A21.2008-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2008-S has a melting point of 115 to 130°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 | nolax AG (Vanora) | nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a meltin...view more nolax A21.2010 is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010 has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2010 S | nolax AG (Vanora) | nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a me...view more nolax A21.2010-S is a slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines and can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. A21.2010-S has a melting point of 135 to 145°C, relative density of 0.9 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2014 PE40 | nolax AG (Vanora) | nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 P...view more nolax A21.2014 PE40 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2014 PE40 has a melting point of 170 to 190°C, relative density of 1.1 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2015 | nolax AG (Vanora) | nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a ...view more nolax A21.2015 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015 has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2015 S | nolax AG (Vanora) | nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S ha...view more nolax A21.2015-S is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on copolyamides. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2015-S has a melting point of 105 to 115°C, relative density of 1.2 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2026 | nolax AG (Vanora) | nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A2...view more nolax A21.2026 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on polyethylenevinyl acetate. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2026 has a melting point of 60 to 75°C, relative density of 1.0 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less | |
| nolax A21.2294 | nolax AG (Vanora) | nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.22...view more nolax A21.2294 is a sheet of slightly opaque colored thermoplastic hotmelt adhesive film built on modified polyolefines. It can be handled with all established lamination, calendaring, and bonding techniques except for high frequency welding. nolax A21.2294 has a melting point of 125 to 135°C, relative density of 0.92 to 0.95 g/cm³, is insoluble in water, is dry cleaning resistant, and not readily biodegradable. view less |
