| Cinergi™ 2239 E | Lawter | Cinergi™ 2239 E is a gel varnish that is fast setting with a high gloss. It has good water as well as heat and shear resistance qualities and finds uses in offset, quickset, sheet-fed and gloss offset inks. | |
| Cinergi™ 4170 E | Lawter | Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-...view more Cinergi™ 4170 E is a special, 100% non-volatile varnish from rosin-based resin, vegetable oil, rosin ester and tung oil. It has a tough, hard film and is rub, scruff, grease, alkali and detergent resistant. The product is used in offset, packaging, sheet-fed and 100% NV inks as well as in overprint varnishes. view less | |
| CN9200 | Sartomer Americas | CN9200 is a difunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. It offers the following properties: toughness, flexibility, non yellowing, excellent adhesion, combined with low odour and low skin irritat...view more CN9200 is a difunctional aliphatic urethane acrylate for use in ultra violet and electron beam curing compositions. It offers the following properties: toughness, flexibility, non yellowing, excellent adhesion, combined with low odour and low skin irritation. view less | |
| Color Paste S Avana 893 | Ichemco | Color Paste S Avana 893 is a dispersion of iron oxides, titanium dioxide, and inert filler in paraffin oil. This product has a pigment concentration of 67%. Color Paste S Avana 893 is most commonly used as a coloring in solvent and hot-melt packaging tape...view more Color Paste S Avana 893 is a dispersion of iron oxides, titanium dioxide, and inert filler in paraffin oil. This product has a pigment concentration of 67%. Color Paste S Avana 893 is most commonly used as a coloring in solvent and hot-melt packaging tape adhesive applications. view less | |
| Color Tape HM Avana 1 | Ichemco | Color Tape HM Avana 1 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 1 is most commonly used to i...view more Color Tape HM Avana 1 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 1 is most commonly used to impart a brown 1 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 10 | Ichemco | Color Tape HM Avana 10 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 10 is most commonly used to...view more Color Tape HM Avana 10 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 10 is most commonly used to impart a brown 10 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 11 | Ichemco | Color Tape HM Avana 11 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 11 is most commonly used to...view more Color Tape HM Avana 11 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 11 is most commonly used to impart a brown 11 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 15 | Ichemco | Color Tape HM Avana 15 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 15 is most commonly used to...view more Color Tape HM Avana 15 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 15 is most commonly used to impart a brown 15 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 19 | Ichemco | Color Tape HM Avana 19 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 19 is most commonly used to...view more Color Tape HM Avana 19 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 19 is most commonly used to impart a brown 19 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 2 | Ichemco | Color Tape HM Avana 2 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 2 is most commonly used to i...view more Color Tape HM Avana 2 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 2 is most commonly used to impart a brown 2 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 21 | Ichemco | Color Tape HM Avana 21 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 21 is most commonly used to...view more Color Tape HM Avana 21 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 21 is most commonly used to impart a brown 21 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 26 | Ichemco | Color Tape HM Avana 26 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 26 is most commonly used to...view more Color Tape HM Avana 26 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 26 is most commonly used to impart a brown 26 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 40 | Ichemco | Color Tape HM Avana 40 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 40 is most commonly used to...view more Color Tape HM Avana 40 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 40 is most commonly used to impart a brown 40 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 5 | Ichemco | Color Tape HM Avana 5 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 5 is most commonly used to i...view more Color Tape HM Avana 5 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 5 is most commonly used to impart a brown 5 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 6 | Ichemco | Color Tape HM Avana 6 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 6 is most commonly used to i...view more Color Tape HM Avana 6 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 6 is most commonly used to impart a brown 6 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 81 | Ichemco | Color Tape HM Avana 81 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Avana 81 is most commonly used to i...view more Color Tape HM Avana 81 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Avana 81 is most commonly used to impart a brown 81 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Avana 9 | Ichemco | Color Tape HM Avana 9 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 9 is most commonly used to i...view more Color Tape HM Avana 9 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Avana 9 is most commonly used to impart a brown 9 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Bianco 20 | Ichemco | Color Tape HM Bianco 20 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20 is most commonly used to...view more Color Tape HM Bianco 20 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20 is most commonly used to impart a white 20 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Bianco 20/C | Ichemco | Color Tape HM Bianco 20/C is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20/C is most commonly u...view more Color Tape HM Bianco 20/C is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 80%. Color Tape HM Bianco 20/C is most commonly used to impart a white 20/C color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape HM Bianco P74 | Ichemco | Color Tape HM Bianco P74 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Bianco P74 is most commonly used ...view more Color Tape HM Bianco P74 is a pigment masterbatch comprised of inorganic metal oxide, dispersing agents, antioxidants, and thermoplastic resins as a binder. This product has a minimum pigment content of 70%. Color Tape HM Bianco P74 is most commonly used to impart a white P74 color in solvent and hot-melt adhesive mass production applications. view less | |
| Color Tape W Dry White | Ichemco | Color Tape W Dry White is a white pigment masterbatch in a dust-free bead form. This product has a pigment concentration of 82%. Color Tape W Dry White is most commonly used as a coloring in water-based acrylic adhesive production applications. | |
| Coronate® 1130 | Tosoh Corporation | Coronate® 1130, in the form of a brownish liquid, contains polymerized-MDI and pure-MDI. It is applicable in elastomers, adhesives, and coatings and is largely used in spray foam applications. | |
| Curing Agent AQ 40 | Ichemco | Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like ...view more Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like protective films, binders for the leather finishing and coatings. view less | |
| Curing Agent ASB | Ichemco | Curing Agent ASB is a metallorganic compound solution. This product has a total solids content of 5.5-6.5%. Curing Agent ASB is most commonly used as a curing and cross-linking agent in solvent-based acrylic adhesive applications. | |
| Curing Agent MDI | Ichemco | Curing Agent MDI is a polyisocyanate in a liquid form. This product is most commonly used as a curing and cross-linking agent in solvent-based primer and adhesive applications. | |
| Curing Agent RF/AE | Ichemco | Curing Agent RF/AE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-29%. Curing Agent RF/AE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing agent RF/AE DE | Ichemco | Curing agent RF/AE DE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-27%. Curing agent RF/AE DE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing Agent V3 | Ichemco | Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive ancho...view more Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent V4 | Ichemco | Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage t...view more Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent W 9 | Ichemco | Curing Agent W 9 is a liquid polyisocyanate. This product has a total solids content of 79-81%. Curing Agent W 9 is most commonly used as a curing and cross-linking agent in water-based adhesive, varnish, and lacquer applications. | |
| Curing Agent W3 | Ichemco | Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather fi...view more Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather finishing applications. view less | |
| Curing Agent W3 DIL | Ichemco | Curing Agent W3 DIL is a water-dispersable polyisocyanate. This product has a total solids content of 69-71%. Curing Agent W3 DIL is most commonly used as a curing and cross-linking agent in adhesive, paint, and lacquer applications. | |
| CV-1161 | NuSil Silicone Technology 1 | CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This ...view more CV-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid and particulate contaminants. It can be used in applications that require low outgassing and minimal volatile condesable materials. This product is ideal for adhering and bonding silicone elastomers, metals, paper, glass, fabric organics rubbers, some synthetics, and films such as polyester or kapton. view less | |
| CV-1500 | NuSil Silicone Technology 1 | CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperatur...view more CV-1500 is a one part, black, electrically conductive RTV silicone adhesive/sealant that can be used for RFI and EMI shielding in electrical and space applications that require static dissipation. It can also protect components from extremes in temperature, humidity, radiation, thermal and mechanical stress. This adhesive is well suited for form-in-place conductive gaskets and attaching heating coils to solar collector plates. view less | |
| CV-2500 | NuSil Silicone Technology 1 | CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar ...view more CV-2500 is a strong silicone based adhesive that is made to handle extreme conditions in space applications including condensation, humidity, radiation, and both mechanical and thermal stress. It can also be an adhesive in applications that involve solar cell arrays where clarity and low volatility is needed. view less | |
| CV-2566 | NuSil Silicone Technology 1 | CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electroni...view more CV-2566 is a flowable silicone adhesive that has a broad operating temperature range. The primary use for this product is to be used for applications that require low outgassing and helps eliminate condensation in sensitive devices. In space and electronic applications, it can be utilized as a sealant or adhesive to help control high vacuum environments. view less | |
| CV-2567 | NuSil Silicone Technology 1 | CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used a...view more CV-2567 is a pourable RTV siicone that can be used as a diluent for reducing the viscosity of other controlled volatility silicones. This product meets the ASTM 595 low outgas specifications outlined in NASA and the European Space Agency. It can be used as an adhesive or sealant for electronic and space applications. view less | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...view more CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. view less | |
| CV-2900 | NuSil Silicone Technology 1 | CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part...view more CV-2900 is a non-corrosive silicone adhesive that is designed for enhanced performance in extreme low and high temperatures. It can be used as a bond and sealant for applications such as overhead or vertical joints that require a non-slumping and one-part material. It can also be utilized as an adhesive , caulking or potting material in electronics/space applications that require minimal outgassing and provides protection from condensation in sensitive devices. view less | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...view more CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. view less | |
| CV2-1142 | NuSil Silicone Technology 1 | CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bond...view more CV2-1142 is a non-corrosive, non-slumping, translucent RTV silicone adhesive/sealant that has controlled volatility. It can be used in applications that require low outgassing under extreme operating conditions. This product is useful for sealing and bonding in applications such as overhead or vertical joints that require a non-slumping, one-part material. It can also be utilized as a sealant, caulking, adhesive or potting material in space and electrical applications that require minimal outgassing. view less | |
| CV2-1161 | NuSil Silicone Technology 1 | CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal...view more CV2-1161 is a pressure sensitive silicone adhesive that retains its adhesive qualities in the presence of minor liquid particulate contaminants. It is able to withstand normal pressure variations as well as high temperature exposure. This product is ideal for bonding and adhering silicone elastomers, paper, metals, glass, fabric, films, and some synthetics. It can also be used for applications that require low outgassing and minimal volatile condensable materials. view less | |
| CV3-2500 | NuSil Silicone Technology 1 | CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive d...view more CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive devices. It can also be utilized as an adhesive for projects involving solar arrays. view less | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...view more CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. view less | |
| CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...view more CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. view less | |
| CV7-1142-1 | NuSil Silicone Technology 1 | CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...view more CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material. view less | |
| DA-100 | DCC (Dairen Chemical Corp.) | DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emu...view more DA-100 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100 forms a flexible film with adhesive properties for broad applications. DA-100 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-100L | DCC (Dairen Chemical Corp.) | DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base e...view more DA-100L is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-100L forms a flexible film with adhesive properties for broad applications. DA-100L is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-100L is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-101 | DCC (Dairen Chemical Corp.) | DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...view more DA-101 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-101 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-101 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-101 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-102 | DCC (Dairen Chemical Corp.) | DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...view more DA-102 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2500-3700 mPa.s. DA-102 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-102H | DCC (Dairen Chemical Corp.) | DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...view more DA-102H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-102H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3500-4500 mPa.s. DA-102H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-102H is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-103 | DCC (Dairen Chemical Corp.) | DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...view more DA-103 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. DA-103 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-103H | DCC (Dairen Chemical Corp.) | DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C...view more DA-103H is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-103H forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 3200-4200 mPa.s. DA-103H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-103H is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-104 | DCC (Dairen Chemical Corp.) | DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...view more DA-104 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-104 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 2000-3000 mPa.s. DA-104 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-104 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-107 | DCC (Dairen Chemical Corp.) | DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...view more DA-107 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-107 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1000-2500 mPa.s. DA-107 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-107 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-1100 | DCC (Dairen Chemical Corp.) | DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 ca...view more DA-1100 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1100 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1100 can be used in tile adhesives. view less | |
| DA-111 | DCC (Dairen Chemical Corp.) | DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C o...view more DA-111 is a non-plasticized, aqueous, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-111 forms a flexible film with adhesive properties for broad applications. It has a viscosity at 25 °C of 1500-2500 mPa.s. It is designed as a medium Tg product at around approximately 14 °C. DA-111 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-111 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-1120 | DCC (Dairen Chemical Corp.) | DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 ca...view more DA-1120 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1120 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1120 can be used in tile adhesives. view less | |
| DA-1122 | DCC (Dairen Chemical Corp.) | DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 ca...view more DA-1122 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and it forms a stable emulsion. DA-1122 improves adhesion, flex strength, abrasion resistance, and workability of modified compounds. DA-1122 can be used in tile adhesives. view less | |
| DA-1126 | DCC (Dairen Chemical Corp.) | DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds....view more DA-1126 is a water re-dispersible powder based on a vinyl acetate/ethylene copolymer based containing polyvinyl alcohol as a protective colloid. DA-1126 improves adhesion, flexibility, plasticity, abrasion resistance and workability of modified compounds. It is used in ceramic tile adhesives, and EIFS. view less | |
| DA-1130 | DCC (Dairen Chemical Corp.) | DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....view more DA-1130 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1130 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. It can be used in tile adhesives. view less | |
| DA-1133 | DCC (Dairen Chemical Corp.) | DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....view more DA-1133 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1133 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1133 is used in construction adhesives. view less | |
| DA-1200 | DCC (Dairen Chemical Corp.) | DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....view more DA-1200 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1200 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1200 is used in tile adhesives. view less | |
| DA-1210 | DCC (Dairen Chemical Corp.) | DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....view more DA-1210 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1210 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1210 is used in construction adhesives, sealing slurries, and repair mortars. view less | |
| DA-125 | DCC (Dairen Chemical Corp.) | DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive f...view more DA-125 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -8 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-125 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-125 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-125 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-128 | DCC (Dairen Chemical Corp.) | DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive f...view more DA-128 is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13°C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128 is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128 is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128 is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-128H | DCC (Dairen Chemical Corp.) | DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesiv...view more DA-128H is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. Due to its low Tg at around -13 °C, the dry film remains flexible even at temperatures below 0 °C. In general, DA-128H is used as general adhesive for packaging, bookbinding, and bonding for plastic films, coated papers. DA-128H is used as a base emulsion for the formulation of adhesives for difficult substrates, such as lacquered surfaces, foils, and plastic films in the packaging and paper industry. DA-128H is also a base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-1400 | DCC (Dairen Chemical Corp.) | DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....view more DA-1400 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1400 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1400 is used in tile adhesives, and sealing slurries. view less | |
| DA-1410 | DCC (Dairen Chemical Corp.) | DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds....view more DA-1410 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1410 improves adhesion, flexural strength, plasticity, abrasion resistance and workability of modified compounds. DA-1410 is used in construction adhesives. view less | |
| DA-1420 | DCC (Dairen Chemical Corp.) | DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compound...view more DA-1420 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1420 improves adhesion, flexural strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1420 is used in tile adhesives. view less | |
| DA-1430 | DCC (Dairen Chemical Corp.) | DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...view more DA-1430 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1430 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1430 is used in tile adhesives, and trowelling compounds. view less | |
| DA-1450 | DCC (Dairen Chemical Corp.) | DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. D...view more DA-1450 is a water re-dispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. DA-1450 improves adhesion, flex strength, plasticity, abrasion resistance, and workability of modified compounds. DA-1450 is used in tile adhesives, and construction adhesives. view less | |
| DA-180L | DCC (Dairen Chemical Corp.) | DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L ...view more DA-180L is a non-plasticized, aqueous, milky, white copolymer dispersion based on vinyl acetate and ethylene. After the evaporation of its water content, DA-180L dries to a clear, soft and flexible film to provide a better waterproofing property. DA-180L is used in general adhesives. view less | |
| DA-265 | DCC (Dairen Chemical Corp.) | DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration...view more DA-265 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. After drying, a water-resistant, clear and flexible film is formed, exhibiting stability against degradation, discoloration by UV-light, oxygen and the ozone. DA-265 is used in mineral coatings, and floor, wall, or ceiling adhesives. . view less | |
| DA-265H | DCC (Dairen Chemical Corp.) | DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, disco...view more DA-265H is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene-acrylate terpolymer emulsion with a solid content of 65%. A water-resistant, clear and flexible film is formed after drying. This film exhibits stability against degradation, discoloration, oxygen, and the ozone. Because of DA-265H's adjusted ethylene content, this film is extremely tacky and uses no plasticizers to get softness or flexibility. DA-265H is used in mineral coatings, and floor, wall, or ceiling adhesives. view less | |
| DA-310 | DCC (Dairen Chemical Corp.) | DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for seali...view more DA-310 is a non-plasticized, aqueous, milky, white vinyl acetate-ethylene copolymer emulsion containing incorporated carboxylic groups. It exhibits VAE emulsion properties together with increased adhesion to metals, like aluminum. DA-310 is used for sealing plastics or metals to other substrates, and as a raw material for adhesives. view less | |
| DA-3510 | DCC (Dairen Chemical Corp.) | DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, fle...view more DA-3510 is a water-redispersible vinyl acetate/ethylene copolymer powder that is readily dispersible in water and forms a stable emulsion. This resin is soft and flexible, because of its relatively high ethylene content. DA-3510 enhances the adhesion, flexural strength, plasticity, and workability of modified compounds. DA-3510 is recommended for use as a sole binder for making construction adhesives and seals. view less | |
| DA-6200 | DCC (Dairen Chemical Corp.) | DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-formin...view more DA-6200 is a water re-dispersible powder based on vinyl acetate/ethylene copolymer containing polyvinyl alcohol as a protective colloid. DA-6200 contains a fine mineral filler as an anti-blocking agent. It is free of solvents, plasticizers and film-forming agents. DA-6200 is recommended for blending with inorganic binders such as cement, hydrated lime to modify mortar hydration systems, tile adhesives, EIFS, and finishing plasters. view less | |
| DA-652 | DCC (Dairen Chemical Corp.) | DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications....view more DA-652 is an aqueous, non-plasticized, milky white copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, the extra viscous DA-652 forms a flexible film with adhesive properties for a broad range of applications. It has a viscosity at 25 °C of 15000-25000 mPa.s. DA-652 is used as base emulsion for floor, wall, or ceiling adhesives. view less | |
| DA-691 | DCC (Dairen Chemical Corp.) | DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691...view more DA-691 is a non-plasticized, aqueous, milky white, cross-linkable copolymer dispersion based on vinyl acetate and ethylene. After evaporation of its water content, DA-691 forms a flexible and soft film. It has a viscosity at 25 °C of 100-500 mPa.s. DA-691's main use is in EPI wood glue. view less | |
| DA-901 | DCC (Dairen Chemical Corp.) | DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant p...view more DA-901 is a non-plasticized, aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. Due to it's low Tg levels it provides a soft transparent film. It is generally used as an adhesive and provides a fire retardant property. DA-901 is used as a general adhesive and is specially suitable for wood applications. view less | |
| DA-908 | DCC (Dairen Chemical Corp.) | DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and...view more DA-908 is an aqueous, milky white terpolymer dispersion based on vinyl chloride, vinyl acetate and ethylene. DA-908 leads to a clear film with low surface tack, and resistance to water, alkali, solvents, light, and aging. It has a Tg value of 20-30 °C and is a cloudy substance initially. DA-908 is used as a base emulsion for general adhesives and EPI wood adhesives. view less | |
| DA-910 | DCC (Dairen Chemical Corp.) | DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics an...view more DA-910 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between -2 and 2 °C. DA-910 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. view less | |
| DA-920 | DCC (Dairen Chemical Corp.) | DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics a...view more DA-920 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 18 and 22 °C. DA-920 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. view less | |
| DA-930 | DCC (Dairen Chemical Corp.) | DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics a...view more DA-930 is a copolymer of Ethylene and Vinyl Chloride with amide functionality. It has fire retardant, water, and alkali resistance properties. It has a Tg rating of between 28 and 32 °C. DA-930 can be used as a base sealant emulsion in non-woven fabrics and paper binder, paper and fabric impregnation binder, flocking binder, car sheet and carpet back coating, and adhesive for high frequency curing. view less | |
| Defoamer FL 1 Conc. | Ichemco | Defoamer FL 1 Conc. is a non-siliconic, organic defoamer. This product has a Brookfield viscosity at 25°C of 500-1500 mPa.s. Defoamer FL 1 Conc. is most commonly used as a defoaming agent in water-based paint, plaster, and adhesive emulsion applications. | |
| Defoamer FL 9 | Ichemco | Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive...view more Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive adhesive applications. view less | |
| Disvamide-615 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-615 is a reactive polyamide resin. This product appears as a highly viscous liquid. It can be used in general-purpose epoxy polyamide coatings that provide excellent resistance, as well as in epoxy adhesives. | |
| Disvamide-625 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-625 is a reactive polyamide resin. This product appears as a viscous liquid. It can be used as a curing agent for epoxy-based adhesives and coatings. | |
| Disvamide-640 | D.S.V. Chemicals Pvt. Ltd. | Disvamide-640 is a reactive polyamide resin. This product appears as a viscous liquid. It can be used as a curing agent for epoxy-based adhesives and coatings. | |
| Docure KH-500F | Kukdo Chemical Co., Ltd. | Docure KH-500F is a Polyamine modified curing agent, which can cure rapidly with epoxy resin at room temperature. KH-500F has been widely applied in the fields of civil engineering, linings, adhesive and coatings. | |
| Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
| Docure KH-700 | Kukdo Chemical Co., Ltd. | Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is wel...view more Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. view less | |
| Docure TH-431 | Kukdo Chemical Co., Ltd. | Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 whi...view more Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. view less | |
| Docure TH-432 | Kukdo Chemical Co., Ltd. | Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 whi...view more Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. view less | |
| Docure TH-438 | Kukdo Chemical Co., Ltd. | Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in produc...view more Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in production of coatings that require additional chemical resistance. view less | |
| Docure TH-451 | Kukdo Chemical Co., Ltd. | Docure TH-451 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-451 is well suited for use in the production of castings and pottings. | |
| Docure TH-452 | Kukdo Chemical Co., Ltd. | Docure TH-452 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-452 is well suited for use in the production of castings and pottings. | |
| Domide G-0240 | Kukdo Chemical Co., Ltd. | Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sea...view more Domide G-0240 is a reactive low viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for use in the making of grouts, moldings and other types of adhesives and sealants. view less | |
| Domide G-0331 | Kukdo Chemical Co., Ltd. | Domide G-0331 is a reactive medium viscosity polyamide resin, which shows excellent adhesion, chemical resistance as a curing agent for epoxy coatings. This product is well suited for making grouts, moldings, adhesives and sealants. |
