| ANCAMIDE® 400 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and p...view more ANCAMIDE® 400 Curing Agent is a unique, low viscosity reactive polyamide developed specifically for use in the curing of liquid epoxy resins. It can be used in a wide range of applications, including flooring and surface coatings, adhesives, sealant and putties, castings, laminates, and cable jointing compounds. view less | Request Sample |
| Ancorante PVC | Ichemco | Ancorante PVC is an additive for PVC adhesive tape printing inks. This product is most commonly used to improve ink transfer properties to the adhesive side of PVC tapes. | |
| Antiox 2246 | Ichemco | Antiox 2246 is a phenolic antioxidant. This product has a melting range of greater than 125°C. Antiox 2246 is most commonly used as an antioxidant in solvent-based adhesive applications. | |
| Antiox AHM | Ichemco | Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and c...view more Antiox AHM is a blend of primary phenolic, thio-ester, and phosphite antioxidants. This product has a total solids content of 98-100% and a melting range of 110-140°C. Antiox AHM is most commonly used as an antioxidant in pressure sensitive adhesive and coating applications. view less | |
| Antiox AHM-EC Pellets | Ichemco | Antiox AHM-EC Pellets are a blend of four non-staining antioxidants. This product has a total solids content of 98-100%. Antiox AHM-EC Pellets are most commonly used as a UV protector in pressure sensitive adhesive and coating applications. | |
| Antiox LX | Ichemco | Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural r...view more Antiox LX is a blend of a phenolic stabilizer, a thio-ester, and a phosphite antioxidant. This product has a total solids content of 98-100% and a Brookfield viscosity at 25°C of 50-200 mPa.s. Antiox LX is most commonly used as an antioxidant in natural rubber, SBR, and resin adhesive applications. view less | |
| Antischiuma FL5 | Ichemco | Antischiuma FL5 is a VOC-free, organic defoamer. This product has a Brookfield viscosity at 25°C of 200-500 mPa.s. Antischiuma FL5 is most commonly used as a defoaming agent in water-based adhesive production applications. | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...view more CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). view less | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...view more CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. view less | |
| Curing Agent AQ 40 | Ichemco | Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like ...view more Curing Agent AQ 40 is an aqueous dispersion of an isocyanate dimer. This product is recommended for the crosslinking of acrylic and polyurethane dispersions in a wide range of applications: adhesives, stickers, P.S.A. and for many more applications like protective films, binders for the leather finishing and coatings. view less | |
| Curing Agent ASB | Ichemco | Curing Agent ASB is a metallorganic compound solution. This product has a total solids content of 5.5-6.5%. Curing Agent ASB is most commonly used as a curing and cross-linking agent in solvent-based acrylic adhesive applications. | |
| Curing Agent MDI | Ichemco | Curing Agent MDI is a polyisocyanate in a liquid form. This product is most commonly used as a curing and cross-linking agent in solvent-based primer and adhesive applications. | |
| Curing Agent RF/AE | Ichemco | Curing Agent RF/AE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-29%. Curing Agent RF/AE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing agent RF/AE DE | Ichemco | Curing agent RF/AE DE is a polyisocyanate in a liquid solution form. This product has a total solids content of 25-27%. Curing agent RF/AE DE is most commonly used in two-component primer and pressure sensitive adhesive applications. | |
| Curing Agent V3 | Ichemco | Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive ancho...view more Curing Agent V3 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 49-51% and a Brookfield viscosity at 25°C of less than 10 mPa.s. Curing Agent V3 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent V4 | Ichemco | Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage t...view more Curing Agent V4 is a curing agent formulated specifically for use in Primer SIL 30 applications. This product has a total solids content of 99-100% and a Brookfield viscosity at 25°C of 20-30 mPa.s. Curing Agent V4 increases silicon adhesive anchorage to substrates where Primer SIL 30 has been applied. view less | |
| Curing Agent W 9 | Ichemco | Curing Agent W 9 is a liquid polyisocyanate. This product has a total solids content of 79-81%. Curing Agent W 9 is most commonly used as a curing and cross-linking agent in water-based adhesive, varnish, and lacquer applications. | |
| Curing Agent W3 | Ichemco | Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather fi...view more Curing Agent W3 is a liquid polyisocyanate. This product has a Brookfield viscosity at 25°C of 1500-3500 mPa.s. Curing Agent W3 is most commonly used to increase heat, water, plasticizer, and organic solvent resistance in coating, adhesive, and leather finishing applications. view less | |
| Curing Agent W3 DIL | Ichemco | Curing Agent W3 DIL is a water-dispersable polyisocyanate. This product has a total solids content of 69-71%. Curing Agent W3 DIL is most commonly used as a curing and cross-linking agent in adhesive, paint, and lacquer applications. | |
| CV-2568 | NuSil Silicone Technology 1 | CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and ther...view more CV-2568 is a thixotropic RTV silicone that has a low density and has controlled volatility. This product act as a bonding or sealant in space applications. It has a broad operating temperature range and can provide radiation resistance, oxidation and thermal stability. It can also be utilized in applications that require low outgassing under extreme operating conditions. view less | |
| CV-2943 | NuSil Silicone Technology 1 | CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under...view more CV-2943 is a thermally conductive RTV silicone that has controlled volatility and is designed for enhanced performance in extreme high or low temperatures. It can be used for applications that require low outgassing and minimal volatile condensables under extreme operating conditions. This product is also utilized as an adhesive for openings in housings or modules where grooves and other configurations require a limited flow material. view less | |
| CV4-1161-5 | NuSil Silicone Technology 1 | CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic compone...view more CV4-1161-5 is a one-part, double-sided pressure sensitive adhesive tape that is best used to adhere and bond metals, paper, glass, fabric, organic rubbers, synthetics and films. It has the ability to collect dust in and around sensitive electronic components and is designed to withstand extreme temperature/pressure variations. view less | |
| Defoamer FL 1 Conc. | Ichemco | Defoamer FL 1 Conc. is a non-siliconic, organic defoamer. This product has a Brookfield viscosity at 25°C of 500-1500 mPa.s. Defoamer FL 1 Conc. is most commonly used as a defoaming agent in water-based paint, plaster, and adhesive emulsion applications. | |
| Defoamer FL 9 | Ichemco | Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive...view more Defoamer FL 9 is a defoaming emulsion based on organo-modified siloxanes. This product has a total solids content of 24-28% and a Brookfield viscosity at 25°C of 220-620 mPa.s. Defoamer FL 9 is most commonly used as a defoaming agent in pressure sensitive adhesive applications. view less | |
| Docure KH-500F | Kukdo Chemical Co., Ltd. | Docure KH-500F is a Polyamine modified curing agent, which can cure rapidly with epoxy resin at room temperature. KH-500F has been widely applied in the fields of civil engineering, linings, adhesive and coatings. | |
| Docure KH-505 | Kukdo Chemical Co., Ltd. | Docure KH-505 is an aliphatic amine modified hardener. KH-505 shows excellent curing ability in the condition of underwater and wet surfaces. It is well suited for the production of coatings and adhesives. | |
| Docure KH-700 | Kukdo Chemical Co., Ltd. | Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is wel...view more Docure KH-700 is a waterborne curing agent designed for hardener of liquid epoxy resin. KH-700 is used as a water dispersible curing agent in combination with conventional liquid epoxy and waterborne epoxy resins to form waterborne epoxy paints. It is well suited for use in the production of waterborne coatings, adhesives for old and new concrete and tar epoxy emulsion paints. view less | |
| Docure TH-431 | Kukdo Chemical Co., Ltd. | Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 whi...view more Docure TH-431 is an aromatic amine modified curing agents for use with epoxy resins. TH-431 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-431 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. view less | |
| Docure TH-432 | Kukdo Chemical Co., Ltd. | Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 whi...view more Docure TH-432 is an aromatic amine modified curing agents for use with epoxy resins. TH-432 can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-432 has a normal cure type when compared to TH-451 and TH-452 which are fast cure type. view less | |
| Docure TH-438 | Kukdo Chemical Co., Ltd. | Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in produc...view more Docure TH-438 is an aromatic amine modified curing agent for use with epoxy resins. TH-438 has been applied for civil engineering, architecture, linings, adhesives, electrical tools due to its excellent characteristics. It is well suited for use in production of coatings that require additional chemical resistance. view less | |
| Docure TH-451 | Kukdo Chemical Co., Ltd. | Docure TH-451 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-451 is well suited for use in the production of castings and pottings. | |
| Docure TH-452 | Kukdo Chemical Co., Ltd. | Docure TH-452 is aromatic amine modified curing agent for use with epoxy resins. It can be applied for civil engineering, architecture, linings, adhesives, electrical tools, etc. TH-452 is well suited for use in the production of castings and pottings. | |
| Fujicure 5000 | Sanho Chemical Co., Ltd. | Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive ...view more Fujicure 5000 is a low viscosity, modified cycloaliphatic polyamine curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-2500 mPa.s and a specific gravity of 1.02. Fujicure 5000 is most commonly used in adhesive and solvent-based coating formulation applications. view less | |
| Fujicure 5300 | Sanho Chemical Co., Ltd. | Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-...view more Fujicure 5300 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 800-1700 mPa.s and a specific gravity of 1.02. Fujicure 5300 is most commonly used in adhesive and self-leveling coating formulation applications. view less | |
| Fujicure 5420 | Sanho Chemical Co., Ltd. | Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive f...view more Fujicure 5420 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure 5420 is most commonly used in concrete adhesive formulation applications. view less | |
| Fujicure FX-220 | Sanho Chemical Co., Ltd. | Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adh...view more Fujicure FX-220 is a modified cycloaliphatic polyamine epoxy curing agent in a light yellow-colored viscous liquid form. This product has a viscosity of 200-500 mPa.s and a specific gravity of 1.07. Fujicure FX-220 is most commonly used in coating and adhesive formulation applications. view less | |
| Fujicure FXD-821 | Sanho Chemical Co., Ltd. | Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesiv...view more Fujicure FXD-821 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 40-70 mPa.s and a specific gravity of 0.95. Fujicure FXD-821 is most commonly used in surface coating, resin mortar, and adhesive formulation applications. view less | |
| Fumed Silica A 200R | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A 200R is a hydrophilic fumed silica with specific surface area around 180m2/g. It provides excellent dispersion and high thickening properties. Mainly be used for Medium transparent, high transparent silicone sealant adhesive. | |
| Fumed Silica A-200 | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A-200 is a hydrophilic fumed silica with specific surface area around 200m2/g. It is ideal for use in high temperature silicon rubber, adhesive and sealants, and paints, coatings and printing inks. | |
| Fumed Silica A-200K | Ningxia Futael Silicon Industry Co.,LTD | Fumed Silica A-200K is a hydrophilic fumed silica with specific surface area around 200m2/g. It is ideal for use as an electronic sealant and a ceramic tile sealant. | |
| Hydrophobic Fumed Silica R1202 | Ningxia Futael Silicon Industry Co.,LTD | Hydrophobic Fumed Silica R1202 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, excellent thickening and thixotropy property, and helps improve flowability of powders. Ideal for use in adhesives a...view more Hydrophobic Fumed Silica R1202 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, excellent thickening and thixotropy property, and helps improve flowability of powders. Ideal for use in adhesives and sealants, epoxy resin, vinyl resin and gel coat, and able glue, Coating, and Copier toner. view less | |
| Hydrophobic Fumed Silica R1208 | Ningxia Futael Silicon Industry Co.,LTD | Hydrophobic Fumed Silica R1208 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, xcellent thickening and thixotropy property, and improves flowability of powders. Ideal for use in adhesives and sea...view more Hydrophobic Fumed Silica R1208 is a fumed silica which is surface treated by polydimethylsiloxane. It provides excellent water resistance, xcellent thickening and thixotropy property, and improves flowability of powders. Ideal for use in adhesives and sealants, epoxy resin, vinyl resin and gel coat, able glue, Coating, and Copier toner. view less | |
| Kingcure 2040-MS | Sanho Chemical Co., Ltd. | Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation appli...view more Kingcure 2040-MS is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 2000-6000 mPa.s and a specific gravity of 1.08. Kingcure 2040-MS is most commonly used in fast-setting adhesive formulation applications. view less | |
| Kingcure 515-KD | Sanho Chemical Co., Ltd. | Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adh...view more Kingcure 515-KD is a modified cycloaliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 300-700 mPa.s and a specific gravity of 1.01. Kingcure 515-KD is most commonly used in solvent-free coating and adhesive formulation applications. view less | |
| Kingcure 613-B | Sanho Chemical Co., Ltd. | Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applicati...view more Kingcure 613-B is a rapid room temperature modified polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-100 mPa.s. Kingcure 613-B is most commonly used in solvent-free coating and adhesive formulation applications. view less | |
| Kingcure 925 | Sanho Chemical Co., Ltd. | Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adh...view more Kingcure 925 is a low viscosity, modified aliphatic polyamine epoxy curing agent in a light-colored liquid form. This product has a viscosity of less than 80 mPa.s and a specific gravity of 0.95. Kingcure 925 is most commonly used in laminate, mortar, adhesive, and coating formulation applications. view less | |
| Kingcure A-611 | Sanho Chemical Co., Ltd. | Kingcure A-611 is a modified aliphatic polyamine adduct curing agent in an amber-colored liquid form. This product has a viscosity of 13-25 mPa.s and a specific gravity of 1.09. Kingcure A-611 is most commonly used in adhesive formulation applications. | |
| Kingcure I-934 | Sanho Chemical Co., Ltd. | Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and ...view more Kingcure I-934 is a modified aliphatic amine hardener in a light yellow-colored liquid form. This product has a viscosity of 80-200 mPa.s and a specific gravity of 1.02. Kingcure I-934 is most commonly used in surface coating, laminate, resin mortar, and adhesive formulation applications. view less | |
| Kingcure K-11 | Sanho Chemical Co., Ltd. | Kingcure K-11 is an accelerated aliphatic amine curing agent in an amber-colored liquid form. This product has a viscosity of 700-2400 mPa.s and a specific gravity of 1.04. Kingcure K-11 is most commonly used in adhesive formulation applications. | |
| Kingcure K-863A | Sanho Chemical Co., Ltd. | Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applica...view more Kingcure K-863A is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1000-2000 mPa.s and a specific gravity of 1.06. Kingcure K-863A is most commonly used in fast-setting adhesive formulation applications. view less | |
| Kingcure N-768 | Sanho Chemical Co., Ltd. | Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation app...view more Kingcure N-768 is a rapid room temperature epoxy resin curing agent in a light honey-colored liquid form. This product has a viscosity of 150-250 mPa.s. Kingcure N-768 is most commonly used in solvent-free coating and fast-setting adhesive formulation applications. view less | |
| Kingcure N-784 | Sanho Chemical Co., Ltd. | Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, l...view more Kingcure N-784 is a rapid room temperature epoxy resin curing agent in a light yellow-colored liquid form. This product has a viscosity of 30-60 mPa.s and a specific gravity of 0.95. Kingcure N-784 is most commonly used in surface coating, resin mortar, laminate, and adhesive formulation applications. view less | |
| Kingcure T-642NA | Sanho Chemical Co., Ltd. | Kingcure T-642NA is a modified aliphatic polyamine curing agent in a light yellow-colored liquid form. This product has a viscosity of less than 80 mPa.s. Kingcure T-642NA is most commonly used in coating and adhesive formulation applications. | |
| Kingcure X-2001 | Sanho Chemical Co., Ltd. | Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation application...view more Kingcure X-2001 is a mannish-type epoxy resin hardener in a light honey-colored liquid form. This product has a viscosity of 1200-2500 mPa.s and a specific gravity of 1.11. Kingcure X-2001 is most commonly used in concrete adhesive formulation applications. view less | |
| Kingmide 305 | Sanho Chemical Co., Ltd. | Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applicat...view more Kingmide 305 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 50,000-70,000 mPa.s and a specific gravity of 0.97. Kingmide 305 is most commonly used in adhesive formulation applications. view less | |
| Kingmide 315 | Sanho Chemical Co., Ltd. | Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formula...view more Kingmide 315 is a polyaminoamide-type expoxy curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 8000-12,000 mPa.s and a specific gravity of 0.97. Kingmide 315 is most commonly used in putty, adhesive, and sealant formulation applications. view less | |
| Kingmide 315-FC | Sanho Chemical Co., Ltd. | Kingmide 315-FC is a polyaminoamide-type curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 315-FC is most commonly used in adhesive formulation applications. | |
| Kingmide 315-FS | Sanho Chemical Co., Ltd. | Kingmide 315-FS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-15,000 mPa.s. Kingmide 315-FS is most commonly used in adhesive formulation applications. | |
| Kingmide 315-L | Sanho Chemical Co., Ltd. | Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and pu...view more Kingmide 315-L is a polyaminoamide-type curing agent in a brown-colored viscous liquid form. This product has a viscosity of 1500-3000 mPa.s and a specific gravity of 0.97. Kingmide 315-L is most commonly used in adhesive, sealant, surface coating, and putty formulation applications. view less | |
| Kingmide 326-A | Sanho Chemical Co., Ltd. | Kingmide 326-A is a polyaminoamide curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-16,000 mPa.s. Kingmide 326-A is most commonly used in adhesive formulation applications. | |
| Kingmide 328-A | Sanho Chemical Co., Ltd. | Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation application...view more Kingmide 328-A is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 10,000-20,000 mPa.s and a specific gravity of 0.97. Kingmide 328-A is most commonly used in adhesive formulation applications. view less | |
| Kingmide 334 | Sanho Chemical Co., Ltd. | Kingmide 334 is a polyaminoamide-type epoxy curing agent in a brown-colored viscous liquid form. This product has a viscosity of 450-650 mPa.s and a specific gravity of 0.96. Kingmide 334 is most commonly used in adhesive formulation applications. | |
| Kingmide 384-S | Sanho Chemical Co., Ltd. | Kingmide 384-S is a modified polyaminoamide epoxy adduct curing agent in a brown-colored viscous liquid form. This product has a viscosity of 7000-10,000 mPa.s. Kingmide 384-S is most commonly used in adhesive formulation applications. | |
| Kingmide 507-KS | Sanho Chemical Co., Ltd. | Kingmide 507-KS is a polyaminoamide curing agent in a brown-colored liquid form. This product has a viscosity of 12,000-18,000 mPa.s. Kingmide 507-KS is most commonly used in adhesive formulation applications. | |
| Kingmide 513-F | Sanho Chemical Co., Ltd. | Kingmide 513-F is a poly amide curing agent in a brown-colored liquid form. This product has a viscosity of 10,000-20,000 mPa.s. Kingmide 513-F is most commonly used in adhesive formulation applications. | |
| Kingmide 701 | Sanho Chemical Co., Ltd. | Kingmide 701 is a modified aliphatic amidoamine curing agent in an amber liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.98. Kingmide 701 is most commonly used in adhesive formulation applications. | |
| Kingmide 710-SS | Sanho Chemical Co., Ltd. | Kingmide 710-SS is a modified aliphatic amidoamine curing agent. This product has a viscosity of 150-500 mPa.s and a specific gravity of 0.99. Kingmide 710-SS is most commonly used in mortar and adhesive formulation applications. | |
| Kingmide 74 | Sanho Chemical Co., Ltd. | Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation app...view more Kingmide 74 is a polyaminoamide-type epoxy resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.95. Kingmide 74 is most commonly used in grout and adhesive formulation applications. view less | |
| Kingmide 74-KB | Sanho Chemical Co., Ltd. | Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive for...view more Kingmide 74-KB is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 500-1000 mPa.s and a specific gravity of 0.96. Kingmide 74-KB is most commonly used in putty and adhesive formulation applications. view less | |
| Kingmide 74-NP | Sanho Chemical Co., Ltd. | Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive form...view more Kingmide 74-NP is a low-viscosity, reactive polyamide resin curing agent in a brown-colored, viscous liquid form. This product has a viscosity of 200-400 mPa.s and a specific gravity of 0.96. Kingmide 74-NP is most commonly used in putty and adhesive formulation applications. view less | |
| Polimelt P88 | Respol Resinas | Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg...view more Polimelt P88 is a tail oil rosin ester that can be used in adhesive formulations. This product has a softening point between 89-90 degrees Celsius and is designed for formulations with increased tackifying requirements. Its acid value is less than 10 mg of potassium hydroxide per gram. view less | |
| Polyol 3611 | Perstorp | Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It...view more Polyol 3611 is a trifunctional, liquid alkoxylated polyol used as a crosslinker in polyurethanes and is a precursor for free radical radiation curing monomers and oligomers. This product has a very low water content and a molecular weight of 280g/mole. It is also used in adhesive and sealant applications. view less | |
| Polyol TD | Perstorp | Polyol TD is a mixed polyol with an average functionality of 1.8. It is a clear, low-color liquid that can be used as a propylene glycol replacement or as additive carrier in paints, coatings, and adhesive applications. | |
| Polytex™ E-100 | Estron Chemical, Inc. | Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. P...view more Polytex™ E-100 is a sulfonamide-based resin modifier for use in lacquers, inks, adhesives and UV curable coatings. Polytex™ E-100 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-100 has excellent compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| Polytex™ E-75 | Estron Chemical, Inc. | Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a for...view more Polytex™ E-75 is a sulfonamide-based resin modifier for use in lacquers, inks, and adhesives. Polytex™ E- 75 enhances gloss, DOI (Distinctness of Image), adhesion to numerous substrates, compatibility and overall coating durability. Polytex™ E-75 is a formaldehyde-free resin alternative for nail lacquers. Polytex™ E-75 has compatibility with most commercial polymeric binders, pigments and plasticizers. view less | |
| R-2634 | NuSil Silicone Technology 1 | R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flo...view more R-2634 is a two-part, electrically conductive RTV silicone that is designed for enhanced performance in extreme high and low temperatures. It can be used as an adhesive to bond covers on housings or where grooves and other configurations require a non-flowable material. This product is especially useful for sealing formed-in-place conductive gaskets and grounding connections. It can also be used for EMI and RFI shielding for aerospace and electrical applications. view less | |
| R-2949 | NuSil Silicone Technology 1 | R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive ...view more R-2949 is a two-part, white, thermally conductive silicone that can cure rapidly with the addition of heat. It is an ideal product to be used in applications that require protection against extreme low and high temperatures. It can be used as an adhesive to bond openings in housings and modules where grooves or other configurations require a limited flow material with moderate thermal conductivity. It can also provide the transfer of heat between electrical components and their heat sinks. view less | |
| Release FR 100 | Ichemco | Release FR 100 is a vegetable oil, release agent, and polyamidic resin-based compound. This product has a total solids content of 98-100%. Release FR 100 is most commonly used in PS adhesive tape and film productions applications. | |
| Release FR 100 V | Ichemco | Release FR 100 V is a release agent. This product has a total solids content of 99-100%. Release FR 100 V is most commonly used in PE and aluminum tape production applications. | |
| Release FR 2 AB | Ichemco | Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape a...view more Release FR 2 AB is a vegetable oil, release agent, and polyamidic resin-based compound in a hydrocarbon solvent solution. This product has a total solids content of 4.5-5.5%. Release FR 2 AB is most commonly used as a release agent in PS adhesive tape and film production applications. view less | |
| Release FR 5 C | Ichemco | Release FR 5 C is an additive and release agent-based compound in a toluene solution. This product has a total solids content of 4-6%. Release FR 5 C is most commonly used as a release agent in PS adhesive tape and film production applications. | |
| Release K 100 D DIL.2 | Ichemco | Release K 100 D DIL.2 is a polyvinylcarbonate release agent in a toluene solvent solution. This product has a total solids content of 1.8-2.2%. Release K 100 D DIL.2 is most commonly used in adhesive tape production applications. | |
| Release K 100 DI DIL. 1 ECO | Ichemco | Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive...view more Release K 100 DI DIL. 1 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 0.9-1.1%. Release K 100 DI DIL. 1 ECO is most commonly used as a release agent in adhesive tape production applications. view less | |
| Release K 100 DI DIL. 1.5 ECO | Ichemco | Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhe...view more Release K 100 DI DIL. 1.5 ECO is a polyvinylcarbamate release agent in an aliphatic and isopropyl alcohol solvent solution. This product has a total solids content of 1.4-1.6%. Release K 100 DI DIL. 1.5 ECO is most commonly used as a release agent in adhesive tape production applications. view less | |
| Release K 100 DM | Ichemco | Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as...view more Release K 100 DM is a polyvinylcarbamate is a synthetic polymer with a high molecular weight. This product has a total solids content of 98-100% and a melting range 75-85°C. Release K 100 DM is most commonly used as a release agent in acrylic adhesive, as well as corona and non corona-treated film coating applications. view less | |
| Release PP 100 | Ichemco | Release PP 100 is a synthetic polymer. This product has a total solids content of 98-100% and a melting point of 83-93°C. Release PP 100 is most commonly used as a release agent in low-noise OPP adhesive tape printing applications. | |
| Release PP 25 | Ichemco | Release PP 25 is a synthetic polymer in a solvent solution. This product has a total solids content of 22-24% and a melting range of 90-115°C. Release PP 25 is most commonly used as a release agent in adhesive tape printing applications. | |
| Release W 40 G2 | Ichemco | Release W 40 G2 is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 150-450 mPa.s. Release W 40 G2 is most commonly used as a release agent in hot-melt and solventborne adhesive applicati...view more Release W 40 G2 is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 150-450 mPa.s. Release W 40 G2 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. view less | |
| Release W 40 GB4 LV | Ichemco | Release W 40 GB4 LV is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 30-100 mPa.s. Release W 40 GB4 LV is most commonly used as a release agent in hot-melt adhesive and porous substrat...view more Release W 40 GB4 LV is a water-based release agent. This product has a total solids content of 38-40% and a Brookfield viscosity at 25°C of 30-100 mPa.s. Release W 40 GB4 LV is most commonly used as a release agent in hot-melt adhesive and porous substrate coating applications. view less | |
| Release W 45 GB 15 | Ichemco | Release W 45 GB 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GB 15 is most commonly used as a release agent in hot-me...view more Release W 45 GB 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GB 15 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. view less | |
| Release W 45 GB 5 | Ichemco | Release W 45 GB 5 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 45 GB 5 is most commonly used as a controlled release agent in ho...view more Release W 45 GB 5 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of 500-1500 mPa.s. Release W 45 GB 5 is most commonly used as a controlled release agent in hot-melt adhesive applications. view less | |
| Release W 45 GS 15 | Ichemco | Release W 45 GS 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GS 15 is most commonly used as a release agent in hot-me...view more Release W 45 GS 15 is a water-based release agent based on acrylic polymers. This product has a total solids content of 44-46% and a Brookfield viscosity at 25°C of less than 500 mPa.s. Release W 45 GS 15 is most commonly used as a release agent in hot-melt and solventborne adhesive applications. view less | |
| Release W40 GB1 | Ichemco | Release W40 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB1 is most commonly used as a release agent in hot-melt and so...view more Release W40 GB1 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB1 is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release W40 GB1 LV | Ichemco | Release W40 GB1 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB1 LV is most commonly used as a release agent in hot-melt and s...view more Release W40 GB1 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41% and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB1 LV is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release W40 GB2 | Ichemco | Release W40 GB2 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH level of 8-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release Release W40 GB2 is most commonly used as a releas...view more Release W40 GB2 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH level of 8-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release Release W40 GB2 is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release W40 GB3 | Ichemco | Release W40 GB3 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 7-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB3 is most commonly used as a release agent in sub...view more Release W40 GB3 is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 7-9, and a Brookfield viscosity at 25°C of 800-1200 mPa.s. Release W40 GB3 is most commonly used as a release agent in substrate coatings where contact with hot-melt and solvent-based adhesives is common. view less | |
| Release W40 GB6 LV | Ichemco | Release W40 GB6 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 8-9, and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB6 LV is most commonly used as a release agent in ...view more Release W40 GB6 LV is a water-based release agent based on acrylic polymers. This product has a total solids content of 39-41%, a pH of 8-9, and a Brookfield viscosity at 25°C of 30-70 mPa.s. Release W40 GB6 LV is most commonly used as a release agent in hot-melt and solvent-based adhesive, as well as porous substrate coating applications. view less | |
| Release WF 30 | Ichemco | Release WF 30 is a water-based release agent based on acrylic polymers. This product has a total solids content of 29-31%, a pH of 3-5, and a Brookfield viscosity at 25°C of 20-70 mPa.s. Release WF 30 is most commonly used as a release agent in technical ...view more Release WF 30 is a water-based release agent based on acrylic polymers. This product has a total solids content of 29-31%, a pH of 3-5, and a Brookfield viscosity at 25°C of 20-70 mPa.s. Release WF 30 is most commonly used as a release agent in technical tape applications. view less | |
| RUETAFLEX 1000 | Rain Carbon Germany GmbH | RUETAFLEX 1000 is a diisopropyl naphthalene. | |
| SiSiB® PC5430 | SiSiB SILICONES | SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments...view more SiSiB® PC5430, also called n-Propyl Silicate, is a colorless transparent liquid. It is used as a cross-linking agent for silicon rubber, and as a modifying agent for organic and inorganic resins; as an inorganic binder for refractory fillers and pigments, like precision investment castings; as a second backup casting coating; as a binder in zinc-rich (corrosion resistant) coating; as a starting material for sol-gel process; as a crosslinking agent for silicone sealant; as a drying agent in sealing compositions; or as a chemical intermediate. view less |
