| Basonat® HI 100AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HI 100AP is a solvent free aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of polyisocyanates based on isocyanurated hexamethylene diiso- cyanate. Basonat® HI 100 ap is solvent-free and ...view more Basonat® HI 100AP is a solvent free aliphatic polyisocyanate for lightfast and weather-resistant two-pack polyurethane coatings. It is composed of polyisocyanates based on isocyanurated hexamethylene diiso- cyanate. Basonat® HI 100 ap is solvent-free and thus allows a broad choice of solvents. For instance, when – as in furniture coatings – less volatile solvents would retard drying excessively, highly volatile solvents can be chosen. view less | |
| Basonat® HI 190 B/S | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HI 190 B/S is an isocyanurate modified HDI polyisocyanate. It is a 90% solution in n-butyl acetate and Solvesso® 100 (1:1) for weather-resistant and high performance two-pack polyurethane coatings. Basonat® HI polyisocyanates are used to crosslin...view more Basonat® HI 190 B/S is an isocyanurate modified HDI polyisocyanate. It is a 90% solution in n-butyl acetate and Solvesso® 100 (1:1) for weather-resistant and high performance two-pack polyurethane coatings. Basonat® HI polyisocyanates are used to crosslink most hydroxy acrylic resins, e. g., Joncryl® grades, and hydroxy polyesters. Basonat® HI 190 B/S ap is solution of Basonat® HI100 ap. Basonat® HI grades are used to formulate particularly lightfast and weather-resistant coatings. Sufficient compatibility with polyester resins containing hydroxyl groups is not always given. view less | |
| Basonat® HI 190 B/S AP | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HI 190 B/S AP is an aliphatic polyisocyanates for lightfast and weather-resistant two-pack polyurethane coatings. It is a 90% solution in a 1:1 blend of n-butyl acetate and Solvesso®1 100. Basonat® HI grades are used to formulate particularly lig...view more Basonat® HI 190 B/S AP is an aliphatic polyisocyanates for lightfast and weather-resistant two-pack polyurethane coatings. It is a 90% solution in a 1:1 blend of n-butyl acetate and Solvesso®1 100. Basonat® HI grades are used to formulate particularly lightfast and weather- resistant coatings. Sufficient compatibility with polyester resins containing hydroxyl groups is not always given. Results from long-term weathering tests show that in most cases gloss retention is better than with polyisocyanates based on bi- urets of hexamethylene diisocyanate (Basonat® HB grades). Their low viscosity allows the non-volatile fraction of coatings to be increased when Basonat® HI grades are used instead of Basonat® HB grades. view less | |
| Basonat® HI2000 (old name : LR 9046) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HI 2000 is a solvent-free, low viscosity isocyanurate modified HDI polyisocyanate for high solid, low VOC, weather-resistant and high performance two-pack polyurethane coatings. This product is composed of polyisocyanates based on isocyanurated h...view more Basonat® HI 2000 is a solvent-free, low viscosity isocyanurate modified HDI polyisocyanate for high solid, low VOC, weather-resistant and high performance two-pack polyurethane coatings. This product is composed of polyisocyanates based on isocyanurated hexamethylene di-isocyanate. Combined with conventional acrylic resins, a solids content approx. 3 % higher than with Basonat® HI 100 can be achieved. Using high-solids binders such as Joncryl® polyol grades allows the solids content to be increased even further. view less | |
| Basonat® HW 1180 PC (old name : HW 180 PC) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HW 1180 PC is a water-emulsifiable polyfunctional isocyanates based on HDI for crosslinking for crosslinking reactive OH group polymer emulsions. It is recommended for waterborne 2k industry coatings. This product is an 80 % solution in Solvenon®...view more Basonat® HW 1180 PC is a water-emulsifiable polyfunctional isocyanates based on HDI for crosslinking for crosslinking reactive OH group polymer emulsions. It is recommended for waterborne 2k industry coatings. This product is an 80 % solution in Solvenon® PC (propylene carbonate). Basonat® HW grades are used as hardeners for polymeric dispersions containing reactive OH groups. view less | |
| Basonat® HW 2000 (old name : LR9056) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® HW 2000 is a water-emulsifiable HDI polyfunctional isocyanate for crosslinking reactive OH group polymer emulsions. It is used as a hardener for polymer dispersion containing reactive OH groups. | |
| Basonat® HW 3180 B (old name : LR 9080) | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonat® 3180 B is a water-emulsifiable polyfunctional isocyanate based on isocyanurated hexa-methylene diisocyanate and isophorone diisocyanate, 80% solution in n-butyl acetate. It is used as a co-hardener in combination of hydrophilic HDI based Polyisoc...view more Basonat® 3180 B is a water-emulsifiable polyfunctional isocyanate based on isocyanurated hexa-methylene diisocyanate and isophorone diisocyanate, 80% solution in n-butyl acetate. It is used as a co-hardener in combination of hydrophilic HDI based Polyisocyanates for water-based 2K PU Coatings. view less | |
| Basonol® HPE 1170 B | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Basonol® HPE 1170 B is a OH functional hyperbranched Polyester to be used as a cobinder in 2K PUR and 1K clear- and pigmented coating 2K systems for improved performance. | |
| Baybond® PU 330 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 330 is an anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fibre sizes. Baybond® PU 330 is commonly used as the film-forming component in glass fiber sizing, especially for glass fibers used to reinfor...view more Baybond® PU 330 is an anionic, non-ionic polyester urethane polymer, used as the film-forming component in glass fibre sizes. Baybond® PU 330 is commonly used as the film-forming component in glass fiber sizing, especially for glass fibers used to reinforce thermosets. Glass fiber sizes based on Baybond® PU 330 have excellent film-forming properties and adhesion. This product also remains stable when exposed to shear forces. As with any product, use of Baybond® PU 330 in a given application must be tested (including but not limited to field testing) in advance by the user to determine suitability. view less | |
| Baybond® PU 403 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 403 nionic, non-ionic polyester urethane polymer, used as the filmforming component in glass fibre sizes. It becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 39 ± ...view more Baybond® PU 403 nionic, non-ionic polyester urethane polymer, used as the filmforming component in glass fibre sizes. It becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 39 ± 1, a flow time at 23°C, (4mmcup) of 11-18, and a pH value at 20°C (supply form) of 6.0-8.0. Baybond® PU 403 was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 403 are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. The mechanical film properties of the product are enhanced by post-crosslinking at temperatures from 170°C for a duration of 30 minutes. Baybond® PU 403 is also very stable against shear forces. view less | |
| Baybond® PU 405 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125...view more Baybond® PU 405 is an anionic/non-ionic crosslinking polyether urethane polymer used as the film-forming component in glass fibre sizes. This product becomes milky white when dispersed in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 32-35, a flow time at 23°C, (4mmcup) of 11-18, and a pH value 20°C (supply form) of 6.0-8.0. Baybond® PU 405 was developed for the sizing of glass fibres used to reinforce thermoplastics, particularly polyamide. Glass fibre sizes based on Baybond® PU 405 are characterised by their outstanding film-forming properties and very good adhesion. They have very good colourfastness, even at high temperatures. The mechanical film properties of the product are developed fully by post-crosslinking at temperatures from 170°C for a duration of 20 minutes. Baybond® PU 405 is also highly resistant to shear forces and hydrolysis. view less | |
| Baybond® PU 406 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a f...view more Baybond® PU 406 is a non-ionic polyurethane polymer used as the film-forming component in glass fiber sizes. This product displays a milky white dispersion in water. It has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 34.5 ± 1.5, a flow time at 23°C, (4mmcup) of 10-22, and a pH value at 20°C, (supply form) of 5.5-7.5. view less | |
| Baybond® PU 407 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, c...view more Baybond® PU 407 is an anionic/non-ionic polyester urethane polymer, that can be used as the film-forming component in glass fiber sizes. This product is has milky white dispersion in water. This product has a non-volatile content (0.9-1.1g / 1h / 125°C, convection oven) of 40 ± 1, a flow time at 23°C, (4mmcup) of 11 - 18, and has a pH value 20°C (supply form) of 6.3 - 7.7. Baybond® PU 407 is particularly well suited for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® PU 407 are characterized by their outstanding film-forming properties and very good adhesion. They have high colorfastness, even at elevated temperatures. It is also stable against shear forces. view less | |
| Baybond® XL 7270 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup)...view more Baybond® XL 7270 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product has a non-volatile content (0.9 - 1.1g / 1h / 125°C, convection oven) of 30 ± 1, a flow time at 23°C, (4mmcup) of 10-14, and a pH value at 20°C (supply form) of 7-8. Baybond® XL 7270 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 7270 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 7270 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| Baybond® XL 825 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 5...view more Baybond® XL 825 is a waterbased aliphatic blocked polyisocyanate that is suitable for use as a crosslinker for glassfiber sizings. This product non-volatile content (0.9 - 1.1g / 1h / 125°C,convection oven) 30 ± 1, a flow time at 23°C, (4mmcup) of 10 - 55 , and a pH value at 20°C (supply form) of 7-8. Baybond® XL 825 was developed as crosslinker for the sizing of glass fibers used in combination with Baybond binders to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XL 825 are characterized by their good colorfastness, even at elevated temperatures. The mechanical film properties of sizings based on Baybond® XL 825 are developed fully by postcrosslinking at temperatures from 170°C for a duration of 20 minutes. The product is compatible with the additives normally used in the formulation of glass sizes, e.g. adhesion promoters, lubricants, antistatic agents and plasticizers. view less | |
| Baybond® XP 2728 | Covestro (formerly Bayer MaterialScience) 科思创 | Baybond® XP 2728 is an anionic/non-ionic polycarbonate-polyether urethane polymer that is used as the film-forming component in glass fiber sizes. This product has a non-volatile content (1g / 1h / 125°C) of 58 - 62, a flow time at 23°C, (4mmcup) of < 90,...view more Baybond® XP 2728 is an anionic/non-ionic polycarbonate-polyether urethane polymer that is used as the film-forming component in glass fiber sizes. This product has a non-volatile content (1g / 1h / 125°C) of 58 - 62, a flow time at 23°C, (4mmcup) of < 90, and a pH value of 7-9. Baybond® XP 2728 was developed for the sizing of glass fibers used to reinforce thermoplastics, particularly polyamide. Glass fiber sizes based on Baybond® XP 2728 are characterized by their outstanding film-forming properties and very good adhesion. The product exhibits outstanding hydrolysis resistance and colorfastness, and is also very stable against shear forces. view less | |
| Bayhydrol® A 145 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 145 is a water-reducible, hydrofunctional polyacrylic dispersion that is used in the formulation of aqueous two-pack clear topcoats for vehicle repair applications, heavy transport finishing and industrial coating. It can be used in combinati...view more Bayhydrol® A 145 is a water-reducible, hydrofunctional polyacrylic dispersion that is used in the formulation of aqueous two-pack clear topcoats for vehicle repair applications, heavy transport finishing and industrial coating. It can be used in combination with amino resins or blocked polyisocyanates for waterborne, one-component, industrial baking coatings. This product has an acid value of 10 ± 3, a viscosity at 23°C, (D = approx. 40 s-1) of 950 ± 550, and a non-volatile content (1g / 1h / 125°C/ convection oven) of 45 ± 2. Bayhydrol® A 145 has good pigment wetting properties and high shear stability. Bead mills have proved suitable as grinding equipment. Only pigments and extenders with a minimal water-soluble content should be used. Bayhydrol® A 145 combined with aliphatic polyisocyanates yields high-gloss topcoats which can be dried at room temperature or force-dried, e.g. at 80°C. The cured paint films are hard and flexible with good single-coat adhesion and good resistance to solvents and water. view less | |
| Bayhydrol® A 2058 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2058 is an aqueous hydroxyfunctional polyacrylic dispersion used in the formulation of flexible two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41 -...view more Bayhydrol® A 2058 is an aqueous hydroxyfunctional polyacrylic dispersion used in the formulation of flexible two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41 - 45, a pH (1:3 in demineralised water) of 7.5 - 9.5, and a viscosity at 23°C, (approx.D=82s-1) of 200 - 2,000. Bayhydrol® A 2058 combined with Bayhydur 3100 yields high-gloss flexible top coats which are resistant to solvents. The formulation can be applied as a one-coat system on many substrates and has good adhesion and body. Two-pack primers can be formulated by combining Bayhydrol® A 2058 with Bayhydur® 3100. These are highly suitable for use on thermoplastics and thermosets and are characterised by excellent adhesion, sandability and water resistance. view less | |
| Bayhydrol® A 2139/2 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2139/2 is an aqueous, fatty acid-modified, hydroxyfunctional polyester/polyacrylate copolymer that can be used in the formulation of two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / ...view more Bayhydrol® A 2139/2 is an aqueous, fatty acid-modified, hydroxyfunctional polyester/polyacrylate copolymer that can be used in the formulation of two-component polyurethane top coats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C/convection oven) of 45-49, a viscosity at 23°C, (D = approx. 40 s-1) of 1,000 - 2,500, an acid value of 11.5 - 14.5, and a pH (1:4 in demineralised water) value of 6.8 - 7.9. Bayhydrol® A 2139/2 can be combined with Bayhydur® 3100 to yield highgloss solvent-resistant top coats. It is used as a one-coat top coat on many substrates, it has good adhesion and high body. When combined, it can also be used to formulate two-component primers for many thermoplastics and thermosets. view less | |
| Bayhydrol® A 2227/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with hi...view more Bayhydrol® A 2227/1 is a polyester-polyacrylate dispersion used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. It can also be used in the formulation of stoving industrial coatings with high whiteness retention on exposure to high temperatures. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 41-43, a viscosity at 23°C, (D = approx. 40 s-1) of 700 - 2,500, an acid value of 7-10, and a pH (1:3 in demineralised water) of 7,5 - 8,5. Bayhydrol® A 2227/1 is characterised by its good pigment wetting properties and high shear stability. Bead and sand mills have proved suitable as grinding equipment. Grinding temperatures of up to approx. 50°C have no detrimental effect on quality of the coating. Given the many different pigments available, the storage stability should always be tested. The rutile titanium dioxide pigments of the Tronox range, especially Tronox® R-KB-4, are particularly suitable. view less | |
| Bayhydrol® A 2290 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2290 is an aqueous hydroxyfunctional polyester polyacrylate dispersion that can be used in the formulation of two-component polyurethane topcoats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C, convection o...view more Bayhydrol® A 2290 is an aqueous hydroxyfunctional polyester polyacrylate dispersion that can be used in the formulation of two-component polyurethane topcoats and primers for plastics. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 43-47, a viscosity at 23°C, D=approx.40s-1 of 200-2,000, and an acid value of 11-13. Bayhydrol® A 2290 is a polyester polyacrylate dispersion which has already been neutralized with dimethylethanolamine. It has good hydrolysis stability and can be thinned with water for application. It is preferably combined with Bayhydur® 3100, Bayhydrol® A 2290 can be used to formulate high gloss, solvent-resistant and tar-resistant top-coats. On many substrates, good adhesion with a good build can be achieved when the formulation is applied as a one-coat finish. view less | |
| Bayhydrol® A 242 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 242 is a water-thinnable polyacrylic resin containing hydroxyl groups. It is used as a coreactant for Bayhydur® and Desmodur® polyisocyanates in the formulation of aqueous two-component polyurethane systems for various applications by brush, ...view more Bayhydrol® A 242 is a water-thinnable polyacrylic resin containing hydroxyl groups. It is used as a coreactant for Bayhydur® and Desmodur® polyisocyanates in the formulation of aqueous two-component polyurethane systems for various applications by brush, roller or spray. This product has a viscosity at 23°C, (D = approx. 165 s-1) of 200 ± 100, a non-volatile content (1g, 1h, 125°C) of 42 ± 2, and a pH (10% in demineralized water) value of 7.1 ± 0.7. Bayhydrol® A 242 is a water-thinnable hydroxyfunctional polyacrylic resin with emulsifying properties. It is neutralised with ammonia. Given the special composition of this product, both hydrophilic polyisocyanates, e.g. Bayhydur® 3100, and hydrophobic grades, such as Desmodur® N 3400 and others, are suitable co-reactants. The resultant water-thinnable two-component system cures to yield a polyurethane film with good general properties, and only a small-scale polyurea reaction takes place. view less | |
| Bayhydrol® A 2427 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2427 is an aqueous, hydroxyfunctional polyacrylate dispersion used in the formulation of fast-drying, waterborne two-component polyurethane primers and topcoats, as well as one-component coatings. This product has a non-volatile content (1 g/...view more Bayhydrol® A 2427 is an aqueous, hydroxyfunctional polyacrylate dispersion used in the formulation of fast-drying, waterborne two-component polyurethane primers and topcoats, as well as one-component coatings. This product has a non-volatile content (1 g/1 h/125°C, convection oven) of 41-44, a viscosity at 23°C, (D=ca.40s-1) of max. 100, and a pH (1:3 in demineralised water) of 8-9. Bayhydrol® A 2427 is preferably combined with anionic hydrophilically modified polyisocyanates such as Bayhydur® XP 2487/1 to formulate transparent and pigmented primers and topcoats. Topcoats based on Bayhydrol® A 2427 and Bayhydur® XP 2487/1 are characterized by their good chemical resistance properties, especially their resistance to discoloring liquids. view less | |
| Bayhydrol® A 2457 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2457 is an anionic polyacrylic dispersion used as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU). This product has a non-volatile content (1g / 1h / 125°C ...view more Bayhydrol® A 2457 is an anionic polyacrylic dispersion used as a binder in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU). This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 38.5 - 41.5, a viscosity at 23°C, D=approx.42s-1 of max. 100, and a pH (1:3 in demineralised water) value of 7.5-9. Due to its outstanding mechanical and chemical resistance properties the product is ideally suited for the formulation of sealers for mineral substrates and reactive resins (EP, PU). In combination with other water-reducible binders, the many potential combination products, compatibility must always be tested. view less | |
| Bayhydrol® A 2470 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion that has waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile con...view more Bayhydrol® A 2470 is an aqueous hydroxyfunctional polyacrylic dispersion that has waterborne 2K-Polyurethane varnishes in combination with aliphatic Polyisocyanates. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile content (1g / 1h / 125°C / convection oven) of 44-47, and a pH (1:4 in demineralised water) value of 7-8. Bayhydrol® A 2470 is a hydroxyfunctional polyacrylic dispersion which can be thinned with water to application viscosity. The viscosity of the product is largely governed by the pH. As the pH may decrease during storage, a decrease in viscosity is also to be expected. The viscosity can be restored to its original value by the addition of small amounts of an aqueous 10% solution of dimethyl ethanol amine. view less | |
| Bayhydrol® A 2542 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2542 is an anionic polyacrylate dispersion that has a waterborne, low VOC two-component polyurethane coatings in combination with aliphatic polyisocyanates. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 48-51,...view more Bayhydrol® A 2542 is an anionic polyacrylate dispersion that has a waterborne, low VOC two-component polyurethane coatings in combination with aliphatic polyisocyanates. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 48-51, a viscosity at 23°C, D=approx.40s-1 of 1,000 - 3,500, and a pH (1:4 in demineralised water) of 7-8. On account of its outstanding mechanical and chemical resistance, the product is particularly suitable for the formulation of hard, high-gloss sealers for mineral substrates and reactive resins (EP, PUR). Furthermore, excellent accentuation of the grain of the substrate (e.g. colored coatings) is achieved. view less | |
| Bayhydrol® A 2546 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2546 is a binder used in the formulation of water-reducible, two-component polyurethane coatings and sealers for mineral substrates and reactive resins (EP,PUR), with anionic polyacrylate dispersion. This product has a non-volatile content (1...view more Bayhydrol® A 2546 is a binder used in the formulation of water-reducible, two-component polyurethane coatings and sealers for mineral substrates and reactive resins (EP,PUR), with anionic polyacrylate dispersion. This product has a non-volatile content (1g / 1h / 125°C / convection oven) of 38-42, a viscosity at 23°C, D=approx.45s-1 of max. 200, and a pH (1:3 in demineralised water) value of 7-9. On account of its outstanding mechanical and chemical resistance, the product is particularly suitable for the formulation of sealers for mineral substrates and reactive resins (EP, PUR), in particular when good hot tire resistance is required. The product can also be combined with other water-reducible binders. On account of the many potential co-reactants, compatibility testing should always be carried out. view less | |
| Bayhydrol® A 2601 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings...view more Bayhydrol® A 2601 is a water-reducible, hydroxyfunctional polyacrylate dispersion used in combination with aliphatic polyisocyanates for the formulation of waterborne two-component clearcoats and topcoats for general industrial and transportation coatings. It can also be used in combination with suitable melamine resins for the formulation of one-component coatings. This product has a viscosity at 23°C, D=approx.40s-1 of 1,500 - 3,000, a non-volatile content (1g / 1ml toluene / 1h / 125°C) of 44-47, and a pH (1:4 in demineralised water) value of 7-8. This product can be used primarily in combination with Bayhydur® 304, XP 2487/1 and Desmodur® N 3900 for air- and oven-drying industrial coatings. The cured coating film is hard, tough but flexible and exhibits high gloss, good filling power, good weather and light stability, good resistance to solvents and gasoline and rapid drying. It is not recommended for clearcoat applications for wood. view less | |
| Bayhydrol® A 2620 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2620 is a water-reducible, hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates for the formulation of high grade, fast drying, waterborne two-component clearcoats and top-coats, e.g. for automotive and ...view more Bayhydrol® A 2620 is a water-reducible, hydroxyfunctional polyacrylic dispersion used in combination with aliphatic polyisocyanates for the formulation of high grade, fast drying, waterborne two-component clearcoats and top-coats, e.g. for automotive and industrial coating applications. This product has an acid number of approx. 9.8, a hydroxyl content (solvent free, calculated) of approx. 3.0, and a density at 20°C of approx. 1,07. Bayhydrol® A 2620 can be used in combination with aliphatic polyisocyanates for the formulation of high-gloss clearcoats and top-coats which can be dried at room temperature or force-dried, e.g. at 130°C. The cured paint films are hard but flexible, with good resistance to solvents, water and chemicals and also exhibit good UV stability. view less | |
| Bayhydrol® A 2646 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2646 is an anionic polyacrylate dispersion used in waterborne, low VOC two-component polyurethane coatings in combination with aliphatic polyisocyanates. This product has a hydroxyl content, (calculated on solid) of approx. 3.8, a hydroxyl co...view more Bayhydrol® A 2646 is an anionic polyacrylate dispersion used in waterborne, low VOC two-component polyurethane coatings in combination with aliphatic polyisocyanates. This product has a hydroxyl content, (calculated on solid) of approx. 3.8, a hydroxyl content, (supply form) of approx. 2.7, and a density at 20°C of approx. 1.06. On account of its outstanding mechanical and chemical resistance, the product is particularly suitable for the formulation of hard, high-gloss sealers for mineral substrates and reactive resins (EP, PUR). Furthermore, good accentuation of the grain of the substrate (e.g. colored coatings) is achieved. The binder can also be used for the formulation of high-grade low VOC coatings for use on substrates such as wood, metal, plastic, etc. view less | |
| Bayhydrol® A 2651 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2651 is an aqueous hydroxyfunctional polyacrylic secondary dispersion well suited for the formulation of high gloss and matt clear 2K polyurethane coatings, as well as pigmented coatings. This product has a pH (1:3 in demineralised water) val...view more Bayhydrol® A 2651 is an aqueous hydroxyfunctional polyacrylic secondary dispersion well suited for the formulation of high gloss and matt clear 2K polyurethane coatings, as well as pigmented coatings. This product has a pH (1:3 in demineralised water) value of 8-9, an acid value of 8-11.2, and a hydroxyl content solvent-free, calculated to approx. 3. Bayhydrol® A 2651, combined with aliphatic polyisocyanates is well suited for the formulation of high gloss and matt clear 2K polyurethane coatings, as well as pigmented coatings. The product was developed in particular for the formulation of two-component wood coating systems. It is characterized by very good film transparency and high wood warmth. Crosslinking with Bayhydur® XP 2487/1 or XP 2655 yields coatings with very high chemical resistance. view less | |
| Bayhydrol® A 2770 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A 2770 is an aqueous hydroxyfunctional polyacrylic dispersion. It can be used in combination with aliphatic polyisocyanates for waterborne 2K-polyurethane coatings. | |
| Bayhydrol® A XP 2469 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A XP 2469 is an aqueous hydroxyfunctional polyacrylic dispersion that is in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. This product has a hydroxyl content (...view more Bayhydrol® A XP 2469 is an aqueous hydroxyfunctional polyacrylic dispersion that is in combination with aliphatic polyisocyanates to formulate aqueous two-component clear and top coats for general industrial finishes. This product has a hydroxyl content (calculated on solid resin) of approx. 2.5, an acid value of approx. 8, a flash point that is not flammable up to boiling point, and a density at 20°C of approx. 1.06. Bayhydrol® A XP 2469 has good pigment wetting properties and high shear stability. Bead mills have proved suitable as grinding equipment. Only pigments and extenders with a minimum water-soluble content should be used. Given the many pigments and extenders available, compatibility testing should always be carried out. view less | |
| Bayhydrol® A XP 2695 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® A XP 2695 is an aqueous hydroxyfunctional polyacrylic dispersion that shows a superior chemical resistance, which can be improved by increasing the NCO/OH ratio. This product has an equivalent weight of approx. 830, a flash point (No flash poin...view more Bayhydrol® A XP 2695 is an aqueous hydroxyfunctional polyacrylic dispersion that shows a superior chemical resistance, which can be improved by increasing the NCO/OH ratio. This product has an equivalent weight of approx. 830, a flash point (No flash point up to initial boiling point) of > 95, and a density at 20°C of approx. 1.06. This product is mainly for air and forced drying coating systems with a very high chemical resistance. The cured paint films are hard, tough but flexible, glossy and high-bodied with good weather stability, lightfastness and superior chemical resistance. The application of a clearcoat based on Bayhydrol® A XP 2695 directly on wood may lead to discoloration. view less | |
| Bayhydrol® HD 2016 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with othe...view more Bayhydrol® HD 2016 is a co-solvent free hydroxyl functional acrylic resin dispersed in water. It is used as a coreactant for Bayhydur water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. This product can also be combined with other water-reducible binders. view less | |
| Bayhydrol® HD 2017 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® HD 2017 is a hydroxyl-functional acrylic resin dispersed in water with approximately 1% co-solvent. It can be used as a coreactant for Bayhydur® water-dispersible polyisocyanates in the formulation of < 50g/l VOC coatings. | |
| Bayhydrol® PR 435 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® PR 435 is an aqueous aliphatic polyurethane dispersion that contains only 5% by weight of organic cosolvent. | |
| Bayhydrol® U 241 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free o...view more Bayhydrol® U 241 is a polyester polyurethane dispersion used in the formulation of stoving industrial coatings, stoving automotive primer surfaces and two-pack polyurethane primers and top coats for plastics. This product has an OH content, solvent-free of approx. 2.5, a minimum film-forming temperature MFT of approx. 0, and a mean particle size of approx. 50. Bayhydrol® U 241 is a polyester-polyurethane dispersion neutralized with dimethyl ethanol amine which is resistant to hydrolysis. The product can be diluted with water for application and shows no dilution anomalies. Bayhydrol® U 241 can be combined with partially methylated melamine resins to formulate water-dilutable stoving coatings and primers which cure at approx. 120°C. view less | |
| Bayhydrol® U 355 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile...view more Bayhydrol® U 355 is an aliphatic, hydroxyfunctional polyester polyurethane dispersion that is used as binders for the formulation of water-thinnable soft-feel coatings. This product has a viscosity at 23°C, (D = approx. 240 s-1) of 250-650, a non-volatile content (1g / 1h / 125°C) of 53-57, and a pH (10% in water) value of 7.0-7.5. Bayhydrol® U 355 can be combined with flexible polyurethane dispersions, e.g. Bayhydrol® UH 240 and UH 340/1, to formulate soft-feel and suede-effect coatings. This product's suitable polyisocyanate components are Bayhydur® 3100, Bayhydur® VP LS 2306 and Bayhydur® VP LS 2319. view less | |
| Bayhydrol® U XP 2698 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH co...view more Bayhydrol® U XP 2698 liphatic, hydroxyfunctional polyester-polyurethane dispersion used as a binder for the formulation of water-reducible soft-touch coatings. This product has an acid number of approx. 8.5, a density at 20°C of approx. 1.07, and an OH content of approx. 0.8. Bayhydrol® U XP 2698 can be used in combination with flexible polyurethane dispersions, e.g. Bayhydrol® UH 340/1, UH 650, UH 2305, UH XP 2658 and UH XP 2660 to formulate soft-touch and suede-effect coatings. The suitable polyisocyanate components are Bayhydur® 304, 3100, XP 2655 and also Desmodur® N 3600 and N 3900. view less | |
| Bayhydrol® U XP 2750 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a...view more Bayhydrol® U XP 2750 is a binder for the formulation of water-reducible 2K-PUR coatings. This product is an aliphatic, hydroxyfunctional polycarbonate ester-polyurethane dispersion, that is cosolvent-free. This product has an acid number of approx. 9.0, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 3.6. Bayhydrol® U XP 2750 is a hydroxyfunctional polycarbonate ester-polyurethane dispersion which can be thinned with water to application viscosity. It is a two-component polyurethane hydrocoatings based on Bayhydrol® U XP 2750 are characterized by high weathering resistance (gloss-retention, resistance to cracking), good appearance (high gloss, low haze value) and very high reflow-behavior after dry-or weet-scratching. view less | |
| Bayhydrol® U XP 2755 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmen...view more Bayhydrol® U XP 2755 is an solvent-free, aqueous hydroxyfunctional polyester-polyurethane dispersion. When combined with aliphatic polyisocyanates, it is well suited for the formulation of glossy and matte clear 2K polyurethane coatings, as well as pigmented coatings. This product provides coatings with very good film transparency, high wood warmth, fast drying, high hardness, and long pot life. view less | |
| Bayhydrol® U XP 2766 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-p...view more Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethane dispersion which can be thinned with water to application viscosity. It is a binder for the formulation of water-reducible 2K-PUR coatings, and is an anionic, hydroxyfunctional polyester-polyurethan dispersion, that is solvent-free. This product has an acid number of approx. 11, a density at 20°C of approx. 1.06, and an OH content (solid resin) of approx. 4.0. Bayhydrol® U XP 2766 is a hydroxyfunctional polyester-polyurethan dispersion which can be thinned with water to application viscosity. In combination with hydrophobic polyisocyanates (e.g. Desmodur® N 3600, N 3900 , XP 2730) and/or with hydrophilic polyisocyanates (e.g. Bayhydur 3100, 304, 305, XP 2487/1, XP 2655) high performance, hard-elastic two-component polurethane-hydrocoatings can be formulated. view less | |
| Bayhydrol® UH 2305 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2305 is an aliphatic, anionic/non-ionic polyester-polyurethane dispersion that is a shear-stable combination binder used in the formulation of flexible two-component polyurethane top coats with pleasant handle, e.g. soft-feel systems. This p...view more Bayhydrol® UH 2305 is an aliphatic, anionic/non-ionic polyester-polyurethane dispersion that is a shear-stable combination binder used in the formulation of flexible two-component polyurethane top coats with pleasant handle, e.g. soft-feel systems. This product has an efflux time at 23°C, (4mmcup) of 11-18, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-8.5. Bayhydrol® UH 2305 can be used as a combination binder with hydroxy-functional resins, primarily Bayhydrol® U XP 2428, in the formulation of highly flexible two-component polyurethane top coats, e.g. soft-feel systems. After crosslinking with, for example, Bayhydur® 3100, force-drying (e.g. 30 - 45 min at 80 °C) yields films with a pleasant handle and good resistance to abrasion and water. view less | |
| Bayhydrol® UH 2342 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2342 is a water-dispersible, anionic, fatty acid modified polyurethane dispersion that is useful as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g ...view more Bayhydrol® UH 2342 is a water-dispersible, anionic, fatty acid modified polyurethane dispersion that is useful as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D = approx. 100/s) of max. 100, and a pH (1:2.5 in demineralised water) level of 6.7-8.2. Due to the product's mechanical and chemical resistance properties, especially its black heel mark resistance, it is ideally suited for the formulation of parquet sealers. A combination with other water-reducible binders is possible because of the many potential combination products. view less | |
| Bayhydrol® UH 240 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 240 is an anionic polyester polyurethane dispersion used as combination binder in highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for plastics. It gives good surface handle and good resistance to abrasio...view more Bayhydrol® UH 240 is an anionic polyester polyurethane dispersion used as combination binder in highly flexible, water-thinnable, air- and force-drying primers and one-coat finishes for plastics. It gives good surface handle and good resistance to abrasion/water. This product has an Efflux time at 23°C, (4mmcup) of max. 70, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6-8, and a mean particle size of max. 210. Bayhydrol® UH 240 can be used in combination with hydrofunctional resins, preferably Bayhydrol® U XP 2428, and U 355 either U 475, in the formulation of highly flexible two-component polyurethane top coats (e.g. in soft-feel coating systems). After cross-linking, Bayhydur® 3100 force-drying (e.g. 30 - 45 min at 80°C) yields films with good surface handle and good resistance to abrasion and water. view less | |
| Bayhydrol® UH 2557 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2557 is a cosolvent free aliphatic, anionic, fatty acid-modified polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1...view more Bayhydrol® UH 2557 is a cosolvent free aliphatic, anionic, fatty acid-modified polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D = approx. 100/s) of max. 100, and a pH (1:2.5 in demineralised water) of 7-9. Due to its mechanical and chemical resistances, in particular black heel mark resistance, the product is particularly well suited for the formulation of parquet sealers. Post-curing of such coatings with Bayhydur®, for example, brings additional advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. The product can also be combined with other water-reducible binders. On account of the many potential co-reactants, compatibility testing should always be carried out. view less | |
| Bayhydrol® UH 2558 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mm...view more Bayhydrol® UH 2558 is a cosolvent-free aliphatic, anionic polyurethane dispersion used as a binder in the formulation of water-reducible coatings and sealers. This product has a non-volatile content (1g / 1h / 125°C) of 35-39, an Efflux time at 23°C, (4mmcup) of max. 40, and a pH (1:3 in demineralised water) value of 7-9. The product is characterized by high resistance to yellowing, very good wet film transparency and very good abrasion resistance (taber), where the films are hard but flexible. Post-curing of such coatings with Bayhydur®, for example, brings additional significant advantages and results in waterborne two-component coatings with significantly higher mechanical and chemical resistance. The mixing ratio of mill base to hardener is generally 10:1. Compatibility with affordable PAC dispersions is good but must be tested on a case-by-case basis. view less | |
| Bayhydrol® UH 2593/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) ...view more Bayhydrol® UH 2593/1 is an aliphatic, fatty acid-modified, anionic polyurethane dispersion that is a binder for the formulation of water-reducible coatings and sealers for wood and wood materials. This product has a non-volatile content (1g / 1h / 125°C) of 34-36, a viscosity at 23°C, (D=ca.100) of ≤ 250, and a pH (1:2.5in demineralised water) of 7-9. The product was developed specifically for the formulation of one- and two-component wood coating systems. It is characterized by very good wet film transparency, high hardness and good black heel mark resistance. Post-curing of such coatings with Bayhydur® 305 or Bayhydur® 3100, for example, brings additional significant advantages and results in waterborne two-component coatings with even higher mechanical and chemical resistance. The mixing ratio of mill base to hardener solution is generally 10:1. The product is also suitable for use in a wide range of applications thanks to the combination of good application properties and good compatibility with cost-effective PAC dispersions. view less | |
| Bayhydrol® UH 2606 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmc...view more Bayhydrol® UH 2606 is a solvent-free anionic polyurethane dispersion containing polycarbonate that is used as a binder for the formulation of water-reducible coatings for plastic substrates and wood materials. This product has an Efflux time at 23°C (4mmcup) of 12-60, a non-volatile content (1g / 1h / 125°C) of 34-36, and a pH value of 7-9. The product was designed specifically for the coating of plastic substrates. In addition the use in the formulation of PVC floor coatings, the binder exhibits a high grade property profile on a variety of substrates. Filler and topcoat applications (one and two-component) are also plausible. Other possibilities are wood and furniture applications. Bayhydrol UH 2606 yields coatings with good leveling, chemical and weather stabilities. They are also characterized by a tough but flexible property profile. Very good combinations are possible with polyester, polyurethane and acrylic dispersions, and combinations with waterborne UV systems are possible. Resistances can also be improved by post-curing with e.g. Bayhydur®. The mixing ratio of mill base to hardener is generally 10:1. view less | |
| Bayhydrol® UH 2864 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2864 is an anionic aliphatic polyester-polyurethane dispersion. It can be used alone or blended with polyacrylic emulsion for the formulation of elastomeric construction coatings. | |
| Bayhydrol® UH 2880 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2864 is an anionic aliphatic polyurethane dispersion. It can be used alone or blended with polyacrylic emulsion or polyurethane dispersion for the formulation of waterproofing membrane coatings and elastomeric construction coatings. | |
| Bayhydrol® UH 2952/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings...view more Bayhydrol® UH 2952/1 is an aliphatic polyurethane resin dispersion used as a binder for waterborne, air- and oven-drying basecoats in two-layer systems for automotive coatings, coatings for plastics, automotive refinishing coatings and industrial coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH value of 6.5-7.5. When used in two-layer systems with TSA and two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 2952/1 are characterized by even, cloud-free films with a very good metallic effect, excellent gloss and good water resistance. Since it adheres to OEM finishes without prior sanding, the metallic basecoat can also be used for online retouching (45 min at 80°C). The metallic basecoat can be oversprayed with TSA or two-component polyurethane clearcoats after pre-drying e.g. for 5 minutes at an oven temperature of 80°C or for 15 minutes at room temperature. view less | |
| Bayhydrol® UH 340/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 340/1 is an aliphatic anionic polyurethane dispersion used as binder in formulation of highly flexible water-thinnable coatings for wood, metal, plastics and mineral substrates. This product is a combination binder to improve elasticity/flex...view more Bayhydrol® UH 340/1 is an aliphatic anionic polyurethane dispersion used as binder in formulation of highly flexible water-thinnable coatings for wood, metal, plastics and mineral substrates. This product is a combination binder to improve elasticity/flexibility of water-thinnable coatings. This product has an Efflux time at 23°C, (4mmcup) of max. 70, a non-volatile content (1g / 1h / 125°C) of 39-41, a pH value of 6-7, and a mean particle size of 120-220. Bayhydrol® UH 340/1 can be used as the sole binder in the formulation of flexible lightfast coatings. The product is also suitable for combination with other water-thinnable binders. The pH of ready-to-use coatings should be between 7 and 8. Substances such as ammonia can be used to adjust the pH. Yellowing has sometimes been observed on maple. view less | |
| Bayhydrol® UH 650 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch ...view more Bayhydrol® UH 650 is a solvent-free, aliphatic polyurethane resin dispersion in water that can be used as a binder for waterborne, air- and oven-drying base coats in two-coat systems for the coating of plastics, and as a combination binder for soft-touch coatings. This product has an Efflux time at 23°C, (4mmcup) of 12-30, a non-volatile content (1g / 1h / 125°C) of 48-52, and a pH value of 6-8. When used in two-layer systems with two-component polyurethane clearcoats, metallic basecoats formulated with Bayhydrol® UH 650 are characterized by good adhesion to many types of plastics, good overcoatability and good water resistance. The metallic basecoat can be oversprayed with a two-component polyurethane clearcoat after predrying e.g. for 5 min at an ambient temperature of 80°C or for 15 min at room temperature. view less | |
| Bayhydrol® UH XP 2592 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used f...view more Bayhydrol® UH XP 2592 is a Polyester-Polyurethane dispersion which dries by oxidation. It can be used as a binder in the formulation of aqueous air- and forced-drying, high-gloss coatings and primers with very good anti-corrosion properties. Mainly used for general industrial finishes. This product has an acid value of approx. 12, a viscosity at 23°C, (D=approx.40s-1) of approx. 300, a non-volatile content (1g / 1h / 125°C) of approx. 45, and a pH (1:4 in demineralised water) of approx. 7.2. Bayhydrol® UH XP 2592 does not contain any cosolvents, no anti skinning agents and no driers and is therefore label-free. Coatings based on this resin show a quick drying and after drying a quite high hardness. After curing over night a very good water-resistance is achievable. High-gloss coatings, however, need a certain amount of suitable co-solvents and additional amine in the formulation. Bayhydrol® UH XP 2592 can be used as universal resin for high-gloss top coats, effect coats and - due to its excellent anti-corrosion properties – as raw material for primers and single coats. view less | |
| Bayhydrol® UH XP 2660 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volati...view more Bayhydrol® UH XP 2660 is an aliphatic polyester-polyurethane dispersion that is cosolvent-free. It is a combination binder for the formulation of water-reducible soft-feel coatings. This product has an Efflux time at 23°C, (4mmcup) of 10-30, a non-volatile content (1g / 1h / 125°C) of 39-41, and a pH (10% in water) of 6-8. Bayhydrol® UH XP 2660 can be used as a binder in combination with hydrofunctional resins, preferably Bayhydrol® U 355 or U 475, in the formulation of highly flexible two-component polyurethane topcoats (e.g. in soft-touch coating systems). When crosslinking with e.g. Bayhydur® 3100, force drying (e.g. 30-45 min at 80°C) yields films with good surface handle, very good resistance to solvents and very good hydrolytic stability. view less | |
| Bayhydrol® UH XP 2719 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of ap...view more Bayhydrol® UH XP 2719 is a solvent-free aliphatic, polyester-based, anionic polyurethane dispersion that is used as a binder for the formulation of water-reducible one and two-component coatings and sealers. This product has an average particle size of approx. 100, a minimum film-forming temperature of 21, and a density of 1,06. The product is characterized by fast drying and good blocking resistance. It can be used in both one-component and two-component formulations, and can also be combined with other anionic, hydrophilized dispersions, such as polyacrylate and polyurethane dispersions. view less | |
| Bayhydrol® UV 2282 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2282 is a waterborne, UV-curing polyurethane dispersion that can be used in the formulation of physically drying, waterborne UV-curing wood and plastic coatings. This product has a flow time at 23°C, (4mmcup) of ≤ 50, a non-volatile content ...view more Bayhydrol® UV 2282 is a waterborne, UV-curing polyurethane dispersion that can be used in the formulation of physically drying, waterborne UV-curing wood and plastic coatings. This product has a flow time at 23°C, (4mmcup) of ≤ 50, a non-volatile content (1g / 1h / 125°C) of 39 ± 1, and a pH level of 7.75 ± 0.75. Bayhydrol® UV 2282 is used in the formulation of High Quality Waterborne UV-curing Wood coatings, that will normally pass the DIN 68 861-1B norm. After the water has evaporated, the coating is physically dry and handable. UV-Curing (10 m/min per 80 W/cm lamp) will result in a very high final quality. The photo initiator demand is low, 1-2% will be enough (by wt., calculated on solid binder). Coatings based on Bayhydrol® UV 2282 will show good adherence to many substrates, including plastics. view less | |
| Bayhydrol® UV 2317 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2317 is a urethane acrylate dispersion that can be used in the formulation of physically drying aqueous UV-curing coatings. This is a clear lacquer that is characterized by its good reemulsification properties and high wet film transparency....view more Bayhydrol® UV 2317 is a urethane acrylate dispersion that can be used in the formulation of physically drying aqueous UV-curing coatings. This is a clear lacquer that is characterized by its good reemulsification properties and high wet film transparency. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 35.5-37.5, a flow time at 23°C, (4 mm cup) of 15-80, and a pH-value of 6.8-8.5. Bayhydrol® UV 2317 is used in the formulation of aqueous UV-curing coatings, especially for application on wood/wood materials. Generally speaking, the coated surfaces can be sanded before UV curing. Additions of 1-2.5% by wt. photoinitiator, calculated on the solid binder, have proved suitable for initiating the curing reaction. The viscosity is adjusted by the addition of polyurethane thickeners. If antifoams are used, they should be thinned in solvents, especially if application is by curtain coating. view less | |
| Bayhydrol® UV 2689/1 XP | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2689/1 XP is a UV-curable aliphatic polyurethane dispersion, which can be used in the formulation of industrial waterborne UV clear and pigmented coatings. Main applications of this product are plastic coatings (e.g mobile phones) and wood c...view more Bayhydrol® UV 2689/1 XP is a UV-curable aliphatic polyurethane dispersion, which can be used in the formulation of industrial waterborne UV clear and pigmented coatings. Main applications of this product are plastic coatings (e.g mobile phones) and wood coatings. Before UV curing, the surface of dried films is soft and slightly tacky, whereas after UV-curing, the coatings are hard with high chemical and mechanical resistance. The product is suitable to achieve high gloss coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 40.0-44.0, a flow time at 23°C, (4 mm cup) of 15.0-50.0, and a pH level of 7.0-8.5. This product is especially suitable for 3C plastic applications e.g. mobile phones and laptops where high performance coatings are required. It is possible to formulate hard high gloss or deep matt clear coats as well as single layer metallic coatings. The resulting coating provides excellent performance meeting the strict requirements of 3C applications. view less | |
| Bayhydrol® UV 2720/1 XP | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings for industrial coating of plastics and wood and other substrates, and is particularly suitable for pigmented systems. As a thermoformable product, it is an ideal solution for po...view more Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings for industrial coating of plastics and wood and other substrates, and is particularly suitable for pigmented systems. As a thermoformable product, it is an ideal solution for postformable coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 39-41, a flow time at 23°C, (4 mm cup) of 15-50, and a pH level of 7.0-9.0. Bayhydrol® UV 2720/1 XP is used for the formulation of waterborne UV coatings, in particular for applications that require good blocking resistance after water evaporation and before UV cure (wood, plastic, pigmented systems). The addition of 1.0 to 2.5 wt. photoinitiator relative to binder has proven effective for initiation. Viscosity is adjusted by the addition of polyurethane thickeners. As the dispersion has a relatively high surface tension, the formulation should always contain a wetting agent, such as BYK® 348 (BYK). Matting agents and additives can be dispersed directly into the formulation using a dissolver. view less | |
| Bayhydrol® UV XP 2687 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2687 is an urethane Acrylate Emulsion that is used in the formulation of waterborne UV curable coatings for wood. It is an emulsion type with high gloss and strong body. This product has a non-volatile content (1g / 1h / 125°C, convection...view more Bayhydrol® UV XP 2687 is an urethane Acrylate Emulsion that is used in the formulation of waterborne UV curable coatings for wood. It is an emulsion type with high gloss and strong body. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 46.0-51.0, a viscosity at 23°C of 50-500, and a ph-value of 6.8-8.5. Bayhydrol® UV XP 2687 is used for the formulation of waterborne UV coatings, especially for application on wood/wood materials. As the dispersion has a relatively high surface tension, the formulation should always contain a wetting agent, such as BYK® 348 (BYK), Surfinol MD 20 (Airproducts) or EFKA 3024 (BASF).Viscosity is set by the addition of polyurethane thickeners. Matting agents should be added in the form of pastes. view less | |
| Bayhydrol® UV XP 2690 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2690 is a UV-curing PU-dispersion that is used for the formulation of waterborne UV coatings for wood and plastic coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 38-40, a viscosity at 23°C of < 80, ...view more Bayhydrol® UV XP 2690 is a UV-curing PU-dispersion that is used for the formulation of waterborne UV coatings for wood and plastic coatings. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 38-40, a viscosity at 23°C of < 80, and a pH level of approx. 7.5-9. For the formulation of weather resistant coatings, the use of light protecting agents (preferably a combination of UV absorbers and hindered amine light stabilizers) is recommended. A modification of the photoinitiator component towards longer absorbing types (MAPO, BAPO) might be necessary. The resulting formulation should always be tested in weathering experiments with regard to the specific substrate, application and curing conditions. view less | |
| Bayhydrol® UV XP 2775 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydrol® UV XP 2775 is a solvent-free urethane acrylate dispersion, that is used for the formulation of waterborne UV clear or pigmented wood and plastic coatings, in particular for highly pigmented wood coatings. Especially usable for white pigmented c...view more Bayhydrol® UV XP 2775 is a solvent-free urethane acrylate dispersion, that is used for the formulation of waterborne UV clear or pigmented wood and plastic coatings, in particular for highly pigmented wood coatings. Especially usable for white pigmented coatings with high pigment content and resistance properties. This product has a non-volatile content (1g / 1h / 125°C, convection oven) of 39.0-42.0, a viscosity at 23°C of < 150, and a pH level of approx. 7.0-9.0. Bayhydrol® UV XP 2775 is used for the formulation of high quality waterborne UV coatings for furniture.Depending on the formulation and the method of application, it is possible to produce finished surfaces that conform to the resistance requirements of DIN 68861, 1B. Bayhydrol® UV XP 2775 is especially usable for white pigmented coatings with high pigment content and resistance properties. After evaporation of water, the coating is physically dry and tack-free. view less | |
| Bayhydur® 304 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 304 is hydrophilically modified, aliphatic polyisocyanate based on hexamethylate diisocyanate (HDI). It is as the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of water...view more Bayhydur® 304 is hydrophilically modified, aliphatic polyisocyanate based on hexamethylate diisocyanate (HDI). It is as the hardener/binder component for high-quality waterborne polymer dispersions and as an additive to improve the property level of waterborne coating and adhesive systems. This product has a NCO content of 18.2 ± 0.5, a viscosity at 23°C of 4,000 ± 1,500, a hazen color value of ≤ 60, and a monomeric HDI content of < 0.15. This product is used mainly as the crosslinking partner for waterborne polyol binders (Bayhydrol®) and as a crosslinker for largely pH-neutral waterborne polymer dispersions, including polyurethane (Dispercoll® U), polyvinyl acetate, polyacrylate and synthetic rubber dispersions. view less | |
| Bayhydur® 305 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) that is used as a hardener for aqueous two-component polyurethane systems. This product has a NCO content of 16.2 ± 0,4, a viscosity at 23°C of 6,500 ± 1,500...view more Bayhydur® 305 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) that is used as a hardener for aqueous two-component polyurethane systems. This product has a NCO content of 16.2 ± 0,4, a viscosity at 23°C of 6,500 ± 1,500, a hazen color value of ≤ 150, and a monomeric HDI content of < 0.15. Bayhydur® 305 is a crosslinker for aqueous coatings. It was developed specially for trade applications where the ease of mixing the hardener by shaking or manual stirring is a key requirement. Despite pre-thinning, the coating yields transparent glossy films. The mixing ratio of mill base to hardener is usually 10:1. view less | |
| Bayhydur® 3100 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 3100 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate, which is used as the hardener component for high-quality aqueous two-pack polyurethane systems and as an additive to improve the property profile of aqueous coat...view more Bayhydur® 3100 is a hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate, which is used as the hardener component for high-quality aqueous two-pack polyurethane systems and as an additive to improve the property profile of aqueous coating and adhesive systems. This product has a viscosity at 23°C of 2,800 ± 800, a NCO content of 17.4 ± 0.5, a color value (Hazen) of ≤ 60, and a monomeric HDI of ≤ 0,15. Due to its hydrophilic character, Bayhydur® 3100 can be easily emulsified in the aqueous phase. It is used mainly as the crosslinking agent for aqueous polyol binders (Bayhydrol®). Bayhydur® 3100 can also be added to conventional OH-free dispersions to improve their property profiles. view less | |
| Bayhydur® 401-60 PGDA | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 401-60 PGDA is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI). Bayhydur® 401-60 PGDA might be used as co-reactant for aqueous resins and as hardener for chemically resistant and weather-stable coating...view more Bayhydur® 401-60 PGDA is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI). Bayhydur® 401-60 PGDA might be used as co-reactant for aqueous resins and as hardener for chemically resistant and weather-stable coating systems. view less | |
| Bayhydur® 401-70 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® 401-70 is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), which is used as the co-reactant for aqueous resins and as the hardener for chemically resistant and weather-stable coating systems. This prod...view more Bayhydur® 401-70 is a hydrophilically modified aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), which is used as the co-reactant for aqueous resins and as the hardener for chemically resistant and weather-stable coating systems. This product has a NCO content of 9.4 ± 0.5, a non-volatile content (0.2g / 60min / 120°C) of 70 ± 2, and a viscosity at 23°C,(D=81,8s-1) of 600 ± 200. Bayhydur® 401-70 is mainly used as the co-reactant for aqueous polyol binders from the Bayhydrol® range. Due to its hydrophilic character, Bayhydur® 401-70 can be easily emulsified in the aqueous phase. The properties (e.g. resistance to chemicals and solvents) of aqueous two-component polyurethane coatings can be improved by the addition of Bayhydur® 401-70. view less | |
| Bayhydur® BL 5335 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® BL 5335 is a hydrophilized, blocked aliphatic polyisocyanate based on Desmodur® W, in combination with Bayhydrol® grade OH-functional polymers for the formulation of lightfast, single-component polyurethane baking coatings. This product has a no...view more Bayhydur® BL 5335 is a hydrophilized, blocked aliphatic polyisocyanate based on Desmodur® W, in combination with Bayhydrol® grade OH-functional polymers for the formulation of lightfast, single-component polyurethane baking coatings. This product has a non-volatile content (1g / 1h / 105°C) of 34-36, a flow time at 23°C, (4mmcup) of 10-30, a pH at 20°C of 4.4-6.0. Bayhydur® BL 5335 is a blocked polyisocyanate and was developed for industrial use. It is used as a hardener for the formulation of lightfast one-component polyurethane baking coatings suitable for spray, dip or roller application. The product is preferably used in glass coating applications. It can be used in combination with Bayhydrol® U XP 2239 for the formulation of hydrolytically stable coatings with good glass adhesion and outstanding resistance to solvents and chemicals, in particular sodium hydroxide. Baking parameters are 30 minutes at 170°C. view less | |
| Bayhydur® BL XP 2706 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate used in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast one-component polyurethane baking coatings and as an additive in waterborne baking systems t...view more Bayhydur® BL XP 2706 is a reactive, blocked aliphatic polyisocyanate used in combination with Bayhydrol® polyols for the formulation of water-reducible, lightfast one-component polyurethane baking coatings and as an additive in waterborne baking systems to improve hardness, impact strength, chemical resistance and adhesion. view less | |
| Bayhydur® XP 2451 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2451 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as the hardener component in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive r...view more Bayhydur® XP 2451 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI). It can be used as the hardener component in the formulation of water-reducible two-component coatings and sealers for mineral substrates and reactive resins (EP, PU); also as an additive to enhance the property profile of waterborne coating systems. Due to its hydrophilic character, Bayhydur® XP 2451 can be easily emulsified in the aqueous phase. It is used mainly as the crosslinking agent for aqueous polyol binders (Bayhydrol®). Bayhydur® XP 2451 can also be added to conventional OH-free dispersions to improve their property profiles. view less | |
| Bayhydur® XP 2487/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2487/1 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), that can be used as a hardener for water borne two-component polyurethane systems. Bayhydur® XP 2487/1 is a crosslinking agent for waterborne systems...view more Bayhydur® XP 2487/1 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), that can be used as a hardener for water borne two-component polyurethane systems. Bayhydur® XP 2487/1 is a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistance are required. The dispersibility of the product in water is influenced by organic cosolvents. view less | |
| Bayhydur® XP 2547 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily di...view more Bayhydur® XP 2547 is a solvent-free, water-dispersible polyisocyanate based on hexamethylene diisocyanate used as a crosslinking agent for two-component waterborne polyurethane coatings. Due to its hydrophilic character, Bayhydur® XP 2547 can be easily dispersed in the aqueous phase. It is used primarily as the crosslinking agent for waterborne polyol binders (Bayhydrol®). The dispersibility of the product in water is influenced by organic cosolvents. view less | |
| Bayhydur® XP 2655 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2655 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) used as the hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2655 is a crosslinking agent for waterborne systems from which reli...view more Bayhydur® XP 2655 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) used as the hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2655 is a crosslinking agent for waterborne systems from which reliable incorporation and high chemical resistances are required. Despite its relatively low hydrophilia, this hardener can be easily dispersed in the aqueous phase, even at low shear forces such as are typically found in trade applications. Coatings formulated with the product yield films with high gloss and very low haze. The increase in viscosity during mixing that is typical for hydrophilized hardeners, in particular with ionically hydrophilized polyol dispersions, can be controlled by prethinning with water or slight amounts of organic cosolvent. view less | |
| Bayhydur® XP 2700 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2700 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), and acts as a hardener for aqueous two-component polyurethane systems. Bayhydur® XP 2700 is a crosslinker for aqueous coatings. It was developed specia...view more Bayhydur® XP 2700 is an hydrophilic aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), and acts as a hardener for aqueous two-component polyurethane systems. Bayhydur® XP 2700 is a crosslinker for aqueous coatings. It was developed specially for trade applications where the ease of mixing the hardener by manual stirring is a key requirement. view less | |
| Bayhydur® XP 2759 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhydur® XP 2759 is an hydrophillic aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), that can be used as a hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2759 is mainly used as co-reactant for aqueous binders. B...view more Bayhydur® XP 2759 is an hydrophillic aliphatic polyisocyanate based on isophorone diisocyanate (IPDI), that can be used as a hardener for waterborne two-component polyurethane systems. Bayhydur® XP 2759 is mainly used as co-reactant for aqueous binders. Because of its hydrophilic character, it can be easily emulsified in the aqueous phase. Bayhydur® XP 2759 yields coatings with high chemical and weather resistance. Bayhydur® XP 2759 can be combined with aliphatic HDI based Desmodur® or Bayhydur® grades in order to reduce drying times and increase hardness, weather resistance and open time as well as blister free film thickness. view less | |
| Bayhytherm® 3146 | Covestro (formerly Bayer MaterialScience) 科思创 | Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. Bayhytherm® 3146 is used for the formulation of waterborne, one-component baking systems ...view more Bayhytherm® 3146 is a water-reducible, aliphatic, self-crosslinking stoving urethane resin used as binder for waterborne, one-component stoving polyurethane systems. Bayhytherm® 3146 is used for the formulation of waterborne, one-component baking systems such as waterborne fillers or general purpose industrial coatings. Coating films based on Bayhytherm® 3146 exhibit extraordinary impact strength, adhesion and overcoatability. Bayhytherm® 3146 can also be used as an additive to conventional waterborne stoving systems to improve flexibility, impact strength and adhesion. view less | |
| Baymedix® AR602 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® AR602 is a polyether polyol based on a tetra-functional starter molecule. | |
| Baymedix® CD102 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® CD102 is an aqueous polyurethane dispersion. | |
| Baymedix® CD104 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® CD104 is an aqueous polyurethane dispersion. | |
| Baymedix® FD103 | Covestro (formerly Bayer MaterialScience) 科思创 | Baymedix® FD103 is an aqueous polyurethane dispersion. | |
| Baymod® PU-A | Rhein Chemie Rheinau GmbH | Baymod® PU-MOD is an aliphatic polyester urethane appearing as a granule. This plasticizing polymer improves the resistance of PVC and POM to oil, grease, solvent, and abrasion. Baymod® PU-A functions as a laminating calendar coating for conveyor belts, f...view more Baymod® PU-MOD is an aliphatic polyester urethane appearing as a granule. This plasticizing polymer improves the resistance of PVC and POM to oil, grease, solvent, and abrasion. Baymod® PU-A functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery, and bags and shoes. view less | |
| Baymod® PU-MOD | Rhein Chemie Rheinau GmbH | Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Appearing as a white powder, this plasticizing polymer functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery,...view more Baymod® PU-MOD is an aliphatic polyester urethane with a low content of PVC as a dusting agent. Appearing as a white powder, this plasticizing polymer functions as a laminating calendar coating for conveyor belts, folding containers, clothing, upholstery, and bags and shoes. view less | |
| BDT-1006 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where with...view more BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 377°C. view less | |
| BDT-1015 | Bomar, formerly Dymax Oligomers & Coatings | BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withst...view more BDT-1015 is a dendritic acrylate with an average functionality of 15. The hyper-branched structure of BDT-1015 imparts a unique combination of low diluted viscosity with unmatched chemical and thermal resistance. This is ideal in applications where withstanding exposure to the hardest of conditions is paramount. BDT-1015 is also great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 372°C view less | |
| BDT-4330 | Bomar, formerly Dymax Oligomers & Coatings | BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where wit...view more BDT-4330 is a dendritic acrylate with an average functionality of 30. The hyper-branched structure of BDT-4330 imparts the unique combination of low diluted viscosity with unmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount. Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 397° view less | |
| BECKOCOAT® PU 428/51XMPAC | Allnex | Beckocoat® PU 428/51XMPAC is a light stabilized, oil-free, moisture curing one-component polyurethane resin. It's used in floor sealers, wood coating, concrete impregnation, and as crosslinkers for alkyd resins in two-component systems. | Request Sample |
| BECKOCOAT® VPU 4204/40LG | Allnex | Beckocoat® VPU 4204/40LG is a flat, moisture curing one-component polyurethane resin. It's used for floor sealers, wood paints and concrete impregnation sealers. | Request Sample |
| BECKOPOX™ EH 2166w/80WA | Allnex | BECKOPOXTM EH 2166w/80WA is an aliphatic polyamine adduct. It is used together with solid epoxy resin dispersions or emulsified liquid resins. | Request Sample |
| BECKOPOX™ EH 613w/80WA | Allnex | Beckopox® EH 613W/80WA is a waterborne acetic acid free aliphatic polyamine adduct. It's a highly reactive hardener for water reducible coatings on mineral metallic substrates where fast cure and water release are important. | Request Sample |
| BECKOPOX™ EH 637 | Allnex | Beckopox® EH 637 is a cycloaliphatic polyamine adduct with very low viscosity, for use together with liquid epoxy resins for flooring compounds with good chemical resistance and low yellowing tendency. | Request Sample |
| BECKOPOX™ EM 2120w/45WA | Allnex | BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorros...view more BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W/45WA is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. view less | Request Sample |
| BECKOPOX™ EM 460/60IBX | Allnex | Beckopox® EM 460/60IBX is an excellent adhesion to steel and nonferrous metals, high corrosions protection, best recoatability. It is used preferably in combination with polyvinyl butyral (PVB) for the production of wash primers and finish coatings. | Request Sample |
| BECKOPOX™ EP 116 | Allnex | Beckopox® EP 116 is a non-crystallizing liquid resin for coatings with high chemical-resistance, adhesives, trowelling, casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 117 | Allnex | Beckopox® EP 117 is a non-crystallizing, reactive diluted liquid resin for chemical-resistant coatings, concrete injections, adhesives, trowelling casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 128 | Allnex | Beckopox® EP 128 is a solvent-free liquid epoxy resin. It is used in: the construction field for chemical and abrasion resistant flooring compounds, for sealing and repairing stone and concrete structures, anticorrosion/solvent-free coating systems, for c...view more Beckopox® EP 128 is a solvent-free liquid epoxy resin. It is used in: the construction field for chemical and abrasion resistant flooring compounds, for sealing and repairing stone and concrete structures, anticorrosion/solvent-free coating systems, for cold and heat-curing trowelling and adhesive systems, in the electrical industry for castings, impregnations and composites, and for tool- and mould constructions, patterns, models and fixtures. view less | Request Sample |
| BECKOPOX™ EP 140 | Allnex | Beckopox® EP 140 is a liquid resin with high chemical resistance for coatings, adhesives, trowelling, casting and laminating compounds. | Request Sample |
| BECKOPOX™ EP 140/80SNB | Allnex | Beckopox® EP 140/80SNB is a liquid A-type resin diluted with organic solvent. Depending on the type of hardener it can be used for room temperature or heat curing applications. This form of delivery is especially designed for high solids formulations of a...view more Beckopox® EP 140/80SNB is a liquid A-type resin diluted with organic solvent. Depending on the type of hardener it can be used for room temperature or heat curing applications. This form of delivery is especially designed for high solids formulations of anticorrosion coatings and coatings with excellent chemical resistance. view less | Request Sample |
