| 5113-V-60 Medium Oil Alkyd | Gabriel Performance Products | 5113-V-60 Medium Oil Alkyd is suitable for use in traffic and road marking paints. | |
| AR-511 | Chan Sieh Enterprises Co, Ltd. | AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromat...view more AR-511 is a styrene copolymer acrylic resin. This product has good hardness, is clear and flexible, and provides outdoor durability. It can be used in road paints, marine paints, exterior coatings, and metal paints. AR-511 is soluble in ketones, aromatics, and esters. view less | |
| AR-514 | Chan Sieh Enterprises Co, Ltd. | AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aroma...view more AR-514 is a styrene copolymer acrylic resin. This product provides chemical resistance, and has good properties on asphalt and concrete. It can be used in concrete paints, road paints, and plastic coatings. AR-514 is solvent in alcohols, ketones, aromatics, and esters. view less | |
| AR-517 | Chan Sieh Enterprises Co, Ltd. | AR-517 is a styrene-acrylic copolymer resin that displays good hardness, high gloss, and good chemical resistance. This product can be used in paints and coatings for road marking, marine, concrete, and interior and exterior wall applications. | |
| Chlorinated Rubber TR1-CR-1 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...view more Chlorinated Rubber TR1-CR-1 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 5-8 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. view less | |
| Chlorinated Rubber TR1-CR-2 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine...view more Chlorinated Rubber TR1-CR-2 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 9-15 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. view less | |
| Chlorinated Rubber TR1-CR-3 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marin...view more Chlorinated Rubber TR1-CR-3 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of 16-24 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. view less | |
| Chlorinated Rubber TR1-CR-4 | Fujian Wantaixing Chemical Development Co., Ltd. | Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine ...view more Chlorinated Rubber TR1-CR-4 is a white or light yellow powder that is odorless, tasteless, and innocuous. This product has a viscosity of ≥25 mPa·s at 25°C, and is water, weather, and flame resistant. It finds application in anti-corrosion paints, marine paints, marking paints, printing inks, and flame retardant paints. view less | |
| Crestacryl® 71-8026 | Scott Bader | Crestacryl® 71-8026 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9044 | Scott Bader | Crestacryl® 71-9044 is used for high grade road marking paints with excellent solvent release. | |
| Crestacryl® 71-9076 | Scott Bader | Crestacryl® 71-9076 has very rapid solvent release and drive-over ability; resin has excellent hardness, very good elasticity and adhesion. It is a high grade road-marking paint. | |
| Crestacryl® 71-9078 | Scott Bader | Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for...view more Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete. view less | |
| DEXICRYL EM 3072 | DEX-VIN POLYMERS PVT LTD | DEXICRYL EM 3072 is an acrylic emulsion with a fine particle size. This product appears as a milky white, free-flowing dispersion. It can be used to make interior, exterior and road marking coatings and paints with good alkaline resistance. | |
| Disvalkyd-551 | D.S.V. Chemicals Pvt. Ltd. | Disvalkyd-551 is an alkyd resin that has been modified with a styrene resin. This product is made from fast-drying oils and penta polyols. It can be used in traffic paints, hammertone finishes, and fast-drying alkali-resistant industrial finishes and co...view more Disvalkyd-551 is an alkyd resin that has been modified with a styrene resin. This product is made from fast-drying oils and penta polyols. It can be used in traffic paints, hammertone finishes, and fast-drying alkali-resistant industrial finishes and coatings. view less | |
| Disvipol-252 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives. | |
| Disvipol-271 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-271 is a phenolic resin. This product has high purity and is very chemical- and weather-resistant. It can be used in spar varnishes, marine enamels, Tung oil-adducts for offset printing, and wire enamels. | |
| Domacryl 5130 70 BAc | HELIOS RESINS | Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and ma...view more Domacryl 5130 70 BAc is a standard and cost-efficient high-solid hydroxy acrylic resin designed for room temperature drying or forced drying of two-pack primers and top coats for transportation coatings, machinery, and other high-quality protective and maintenance coatings. view less | |
| ECOPOLFIX | Ecopol Tech | ECOPOLFIX is an aqueous anionic dispersion of an acrylic copolymer. It is suitable for application on roads, unpaved paths, parking lots and others. Fixer and stabilizer for ground applications. Main characteristics include good fixation of soil and good ...view more ECOPOLFIX is an aqueous anionic dispersion of an acrylic copolymer. It is suitable for application on roads, unpaved paths, parking lots and others. Fixer and stabilizer for ground applications. Main characteristics include good fixation of soil and good elasticity, low water absorption and steam proof, dust repellent, abrasion resistant and soil stabilizer. view less | |
| Epotec® YD 134 A | Aditya Birla | Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protectiv...view more Epotec® YD 134 A is an unmodified, semi-solid diglycidyl ether of bisphenol-A, dissolved in acetone for ease of handling. This product is ideal for use in coal tar-based coatings, adhesives, flooring applications, road coverings, and high solids protective coatings. view less | |
| G-100 Modified Petroleum Resin (C5/C9) | Yangzhou Sunchem Co., Ltd. | G-100 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. ...view more G-100 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. It can also be used in inks and pressure sensitive adhesives and sealants. view less | |
| G-110 Modified Petroleum Resin (C5/C9) | Yangzhou Sunchem Co., Ltd. | G-110 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. ...view more G-110 Modified Petroleum Resin (C5/C9) is an aromatic resin in the form of a pale yellow granular solid. This product provides good process ability in hot melt road marking and is a natural tackifier and heat stabilizer in hot melt adhesive applications. It can also be used in inks and pressure sensitive adhesives and sealants. view less | |
| G-Modified Petroleum Resin (C5/C9) (G-100) | Shanghai Qilong Chemical Co., Ltd. | G-Modified Petroleum Resin (C5/C9) (G-100) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often ...view more G-Modified Petroleum Resin (C5/C9) (G-100) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often used as an ink additive or binder for hot melt road marking paint and tackifier for hot melt adhesives. view less | |
| G-Modified Petroleum Resin (C5/C9) (G-110) | Shanghai Qilong Chemical Co., Ltd. | G-Modified Petroleum Resin (C5/C9) (G-110) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often ...view more G-Modified Petroleum Resin (C5/C9) (G-110) is pale yellow granular solids and an aliphatic modified aromatic resin obtained from the co-polymerizing of C5 and C9 fraction that derived from the by-product thermal cracking of naphtha. This product is often used as an ink additive or binder for hot melt road marking paint and tackifier for hot melt adhesives. view less | |
| HC125 | Tianyi Chemical Engineering Material Co., Ltd. | HC125, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. I...view more HC125, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less | |
| HC125B | Tianyi Chemical Engineering Material Co., Ltd. | HC125B, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. ...view more HC125B, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less | |
| HC130 | Tianyi Chemical Engineering Material Co., Ltd. | HC130, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. I...view more HC130, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less | |
| HC130A | Tianyi Chemical Engineering Material Co., Ltd. | HC130A, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. ...view more HC130A, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less | |
| HC130B | Tianyi Chemical Engineering Material Co., Ltd. | HC130B, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. ...view more HC130B, in the form of a slightly yellow, transparent bead, is a compound adduct of gum rosin and maleic acid anhydride which has been esterified with either glycerol or pentaerythritol. This product can be used in phenolic traffic paints and coatings. It is soluble in coal tar, esters, and turpentine oil but insoluble in alcoholic solvents. The end product will be resistant to yellowing and heat. view less | |
| HC52100 | Ecopower Chemical Co., Ltd. | HC52100 is a C5 petroleum hydrocarbon resin that can be used in hot-melt traffic paints. | |
| HIGREE™ C5 Petroleum Resin | Qingdao Higree Chemical Co., Ltd. | HIGREE™ C5 Petroleum Resin is a light color hydrocarbon resin that has a low molecular weight. This product is manufactured from aliphatic petroleum monomers. It is compatible with base polymers in adhesives and sealants and enhances tack and adhesion. HI...view more HIGREE™ C5 Petroleum Resin is a light color hydrocarbon resin that has a low molecular weight. This product is manufactured from aliphatic petroleum monomers. It is compatible with base polymers in adhesives and sealants and enhances tack and adhesion. HIGREE™ C5 Petroleum Resin is primarily used as an additive in PSA, hot melt adhesives, sealants, and thermoplastic road marking paints. view less | |
| HIGREE™ CL100 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ CL100 is a light color hydrocarbon resin with a low molecular weight. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is manufactured from aliphatic petroleum-derived monomers, and it is primarily used as an ...view more HIGREE™ CL100 is a light color hydrocarbon resin with a low molecular weight. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is manufactured from aliphatic petroleum-derived monomers, and it is primarily used as an additive in road marking paint, hot melt adhesive, and PSA. view less | |
| HIGREE™ CL1102 | Qingdao Higree Chemical Co., Ltd. | HIGREE™ CL1102 is a pale yellow hydrocarbon resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is specially design...view more HIGREE™ CL1102 is a pale yellow hydrocarbon resin obtained from polymerizing unsaturated aliphatic monomers from the process of cracking of naphtha. It has a specific gravity of 0.94-0.99 g/cm3 and an ash content of 0.05%. This product is specially designed as a binder for thermoplastic road marking formulations. view less | |
| HIKOREZ A-1100 | Kolon | HIKOREZ A-1100 is a pale yellow thermoplastic resin. This product can be used as tackifier for pressure sensitive adhesives. HIKOREZ A-1100 can be used as the binder for hot melt road marking as well as a binder for hot melt road marking. | |
| HIKOREZ C-1100 | Kolon | HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhes...view more HIKOREZ C-1100 is a pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The primary uses of this product are tackifier for pressure sensitive adhesive, binder for hot melt road marking and rubber compounding agent for tires, tubes, rubber coated clothes and etc. view less | |
| HIKOREZ T-1095 | Kolon | HIKOREZ T-1095 is a pale yellow thermoplastic resin which is primarily used as hot melt based pressure sensitive adhesives, especially Stryene-Isoprene-Styrene based PSA. HIKOREZ T-1095 also can be used as tackifier for hot melt adhesives. | |
| HIKOREZ T-1100 | Kolon | HIKOREZ T-1100 is a pale yellow thermoplastic resin which is primarily used as tackifier for solvent based pressure sensitive adhesives, hot melt based pressure sensitive adhesives and hot melt adhesives. | |
| HR100 | Tianyi Chemical Engineering Material Co., Ltd. | HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR100, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR100A | Tianyi Chemical Engineering Material Co., Ltd. | HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...view more HR100A, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR100B | Tianyi Chemical Engineering Material Co., Ltd. | HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowin...view more HR100B, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR105 | Tianyi Chemical Engineering Material Co., Ltd. | HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR105, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| HR110 | Tianyi Chemical Engineering Material Co., Ltd. | HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing...view more HR110, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging view less | |
| HR95 | Tianyi Chemical Engineering Material Co., Ltd. | HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing ...view more HR95, in the form of a pale yellow, transparent bead, is a resin that can be used in hot melt road marking paints for bitumen or cement road surfaces. This product is efficient in shielding and absorbing ultraviolet lights. It is resistant to yellowing and aging. view less | |
| Hydrocarbon Resin C5 HPE100R | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplas...view more Hydrocarbon Resin C5 HPE100R is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.4 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. view less | |
| Hydrocarbon Resin C5 HPE100R-S | Resin Chemicals Co., Ltd. | Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermopl...view more Hydrocarbon Resin C5 HPE100R-S is a raw material used to provide resistance to crushing, abrasion, and smudge while providing fast drying properties. It has a Voc of 0.8 mg/m3 and a softening point of 98-102°C. This product is commonly applied in thermoplastic road-marking paints, bitumen road surfaces, asphalt, and cement road surfaces. view less | |
| Hypomer FX-2460AF | Elementis 海名斯特殊化学 | Hypomer FX-2460AF is an acrylic polyol resin. It offers excellent benefits, such as fast drying, good adhesion on plastic substrates, good weather resistance, good pigment wetting, and more environmentally friendly solvent composition. This product is rec...view more Hypomer FX-2460AF is an acrylic polyol resin. It offers excellent benefits, such as fast drying, good adhesion on plastic substrates, good weather resistance, good pigment wetting, and more environmentally friendly solvent composition. This product is recommended for plastic coatings, basecoats, and transportation and industrial applications. view less | Request Sample |
| KRATON® D1101 AIM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a ...view more KRATON® D1101 AIM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with calcium carbonate for supply to the North American market. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AIM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1101 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide ...view more KRATON® D1101 AS Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1101 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1101 ASM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1101 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...view more KRATON® D1101 AT Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1101 AU Polymer | Kraton Polymers International Ltd. | KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, ...view more KRATON® D1101 AU Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as a porous pellet, undusted. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 AU Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1101 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide r...view more KRATON® D1101 ES Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. view less | |
| KRATON® D1101 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of...view more KRATON® D1101 ESM Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, adhesives, and sealants. view less | |
| KRATON® D1101 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hard...view more KRATON® D1101 ET Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 31% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1101 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coating, and sealants. view less | |
| KRATON® D1155 JO Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and l...view more KRATON® D1155 JO Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JO Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1155 JOP Polymer | Kraton Polymers International Ltd. | KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and ...view more KRATON® D1155 JOP Polymer is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied as dusted dense pellets. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1155 JOP Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1184 ES Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1184 ES Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ES Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1184 ESM Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1184 ESM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ESM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1184 ET Polymer | Kraton Polymers International Ltd. | KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1184 ET Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1184 ET Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1186 AS Polymer | Kraton Polymers International Ltd. | KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide...view more KRATON® D1186 AS Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 AS Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1186 ASM Polymer | Kraton Polymers International Ltd. | KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range ...view more KRATON® D1186 ASM Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as powder dusted with amorphous silica. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 ASM Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| KRATON® D1186 AT Polymer | Kraton Polymers International Ltd. | KRATON® D1186 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of ha...view more KRATON® D1186 AT Polymer is a clear, branched block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied as porous pellets dusted with talc. This product is versatile with a combination of high strength, wide range of hardness, and low viscosity for easy thermoplastic melt processing or processing in solution. KRATON® D1186 AT Polymer is used in pressure sensitive adhesives, hot melt spray diaper adhesives, construction adhesives, road and pipe coatings, and sealants. view less | |
| Laroflex® MP 15 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laroflex® MP 15 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product is 12–18 mPa . s. It can be used for anti-corrosion coatings, for coating...view more Laroflex® MP 15 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product is 12–18 mPa . s. It can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. This product is compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. The low-viscous solution of Laroflex® MP 15 is easiest diluted with aliphatic hydrocarbons. It produces the highest gloss and the viscosity changes least during storage. view less | |
| Laroflex® MP 25 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laroflex® MP 25 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product 20–26 mPa . s. It can be used for anti-corrosion coatings, for coatings o...view more Laroflex® MP 25 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product 20–26 mPa . s. It can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. This product is compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. The low-viscous solution of Laroflex® MP 25 is diluted the easiest with aliphatic hydrocarbons. It produces highest gloss and viscosity changes least during storage. view less | |
| Laroflex® MP 35 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laroflex® MP 35 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product is 30–40 mPa . s. It can be used for anti-corrosion coatings, for coating...view more Laroflex® MP 35 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this product is 30–40 mPa . s. It can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. This product is compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. view less | |
| Laroflex® MP 45 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Laroflex® MP 45 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this grade is 40–50 mPa . This fine white powder can be used for anti-corrosion coatin...view more Laroflex® MP 45 is a chlorinated binder that is resistant to hydrolysis. It is composed of copolymers based on vinyl chloride and vinyl isobutyl ether. The viscosity of this grade is 40–50 mPa . This fine white powder can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. They are compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. view less | |
| LUHOREZ A-1100 | Zibo Luhua Hongjin New Material Co., Ltd. | LUHOREZ A-1100 is a pale yellow thermoplastic resin. The major usages are tackifier for pressure sensitive adhesive, because of its well-balanced PSA properties such as trackness,adhesive strength and cohesive strength. This grade can also be used as the ...view more LUHOREZ A-1100 is a pale yellow thermoplastic resin. The major usages are tackifier for pressure sensitive adhesive, because of its well-balanced PSA properties such as trackness,adhesive strength and cohesive strength. This grade can also be used as the binder for hot melt road marking. view less | |
| LUHOREZ A-1100S | Zibo Luhua Hongjin New Material Co., Ltd. | LUHOREZ A-1100S is a pale yellow thermoplastic resin. The major usages are tackifier for pressure sensitive adhesive, because of its well-balanced PSA properties such as trackness,adhesive strength and cohesive strength, and this grade also can be used as...view more LUHOREZ A-1100S is a pale yellow thermoplastic resin. The major usages are tackifier for pressure sensitive adhesive, because of its well-balanced PSA properties such as trackness,adhesive strength and cohesive strength, and this grade also can be used as the binder for hot melt road marking. view less | |
| Maleic Acid Resin M-120 | Ecopower Chemical Co., Ltd. | Maleic Acid Resin M-120 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints. | |
| Maleic Acid Resin M-130 | Ecopower Chemical Co., Ltd. | Maleic Acid Resin M-130 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints. | |
| Maleic Acid Resin M-140 | Ecopower Chemical Co., Ltd. | Maleic Acid Resin M-140 is a rosin modified maleic anhydride resin in the form of a slightly yellow transparent solid. This product is commonly used in the formulation of phenolic, nitro, and PU paints, printing inks, and road marking paints. | |
| ML100 | Guangxi Zhongchang Resin Co., Ltd. | ML100 is a light yellow flaky solid and a specialty road making resin derived from natural gum rosin. This product has characteristics such as light color, high softening point , ultraviolet absorption, free radical capture, peroxide decompose and active ...view more ML100 is a light yellow flaky solid and a specialty road making resin derived from natural gum rosin. This product has characteristics such as light color, high softening point , ultraviolet absorption, free radical capture, peroxide decompose and active oxygen diminish. It does not pollute the air and contains strong wear and leveling that enables anti-yellowing and anti-aging advantages. view less | |
| Nebores® SA 10-60 PBA | NECARBO B.V. | Nebores® SA 10-60 PBA is a high solids thermoplastic acrylic resin that provides very fast drying, good colour stability, excellent hardness, long-term flexibility, and good ageing and weather resistance. This product finds application in road marking pai...view more Nebores® SA 10-60 PBA is a high solids thermoplastic acrylic resin that provides very fast drying, good colour stability, excellent hardness, long-term flexibility, and good ageing and weather resistance. This product finds application in road marking paints and highly filled coatings on mineral substrates. view less | |
| Petroleum Resin C5 & C9 Copolymer Resin #3100 | Innova (Tianjin) Chemicals Co. Ltd. | Petroleum Resin C5 & C9 Copolymer Resin #3100 is an aliphatic resin with a low molecular weight. It is used as a tackifier and has a softening point of 96-104°C. This product can be used in road marking paints and hot melt pressure-sensitive adhesives. | |
| Petroleum Resin C5-100 | Innova (Tianjin) Chemicals Co. Ltd. | Petroleum Resin C5-100 is an aliphatic resin with a low molecular weight. It is used as a tackifier and has a softening point of 95-105°C. This product can be used in road marking paints and hot melt pressure-sensitive adhesives. | |
| Petroleum Resin C5-100A | Innova (Tianjin) Chemicals Co. Ltd. | Petroleum Resin C5-100A is an aliphatic resin with a low molecular weight. It is used as a tackifier and has a softening point of 96-104°C. This product can be used in road marking paints and hot melt pressure-sensitive adhesives. | |
| Petroleum Resin C5-2100 | Innova (Tianjin) Chemicals Co. Ltd. | Petroleum Resin C5-2100 is an aliphatic resin with a low molecular weight. It is used as a tackifier and has a softening point of 95-105°C. This product can be used in road marking paints and hot melt pressure-sensitive adhesives. | |
| Resin for Hot Melt Road Marking R-100 | Ecopower Chemical Co., Ltd. | Resin for Hot Melt Road Marking R-100 is a gum rosin that can be used as a link for traffic marking paints and all kinds of bitumen and cement road surfaces. | |
| Resin for Hot Melt Road Marking R-105 | Ecopower Chemical Co., Ltd. | Resin for Hot Melt Road Marking R-105 is a gum rosin that can be used as a link for traffic marking paints and all kinds of bitumen and cement road surfaces. | |
| Resin for Hot Melt Road Marking R-95 | Ecopower Chemical Co., Ltd. | Resin for Hot Melt Road Marking R-95 is a gum rosin that can be used as a link for traffic marking paints and all kinds of bitumen and cement road surfaces. | |
| Rosin Modified Maleic Resin MR115R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to prov...view more Rosin Modified Maleic Resin MR115R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 112-117°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. view less | |
| Rosin Modified Maleic Resin MR120R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to prov...view more Rosin Modified Maleic Resin MR120R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 117-123°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. view less | |
| Rosin Modified Maleic Resin MR125R | Resin Chemicals Co., Ltd. | Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to prov...view more Rosin Modified Maleic Resin MR125R is a solid adduct of gum rosin and maleic anhydride created through the esterification of glycerol. It is pale, yellow solid flakes in appearance with a softening point of 122-128°C. This product is commonly used to provide resistance to abrasion, crocking, and crushing while providing leveling and fast drying in traffic marking paints. view less | |
| SILIKOPON® EF | Evonik Operations GmbH, BL Coating Additives | SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pi...view more SILIKOPON® EF is a silicone-epoxy resin for high temperature resistant corrosion protection coatings. It is a stoving resin and is distinguished by good adhesion and resistance to solvents. It can be used on concrete walls and floors and for roof tile, pipe lining, and commercial transport coatings. Some special features of SILIKOPON® EF includes extraordinary gloss retention and weather resistance, an anti-graffiti effect, excellent corrosion resistance, and is suitable for ultra high solids coatings. view less | Request Sample |
| Thermoplastic Road Marking Resin RM-100 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...view more Thermoplastic Road Marking Resin RM-100 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 97-103°C. view less | |
| Thermoplastic Road Marking Resin RM-105 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...view more Thermoplastic Road Marking Resin RM-105 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 102-108°C. view less | |
| Thermoplastic Road Marking Resin RM-110 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This pro...view more Thermoplastic Road Marking Resin RM-110 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 107-113°C. view less | |
| Thermoplastic Road Marking Resin RM-95 | Resin Chemicals Co., Ltd. | Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This prod...view more Thermoplastic Road Marking Resin RM-95 is a raw material produced from gum rosin that is used to provide light color and moderate softening, UV absorption, light stability, and actualization for light screen in thermoplastic road marking paints. This product is pale yellow beads in appearance with a softening point of 92-98°C. view less | |
| Thermoplastic Solid Acrylic Resin AR-02 | Anhui Elite Industrial Co., Ltd | Thermoplastic Solid Acrylic Resin AR-02 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-02 pro...view more Thermoplastic Solid Acrylic Resin AR-02 is a white granular which is ester, ketone, and aromatics soluble and gasoline and alcohol insoluble. This product has a viscosity between 250-450 and also provides chemical, water, and alcohol resistance. AR-02 provides adhesion, flexibility, dispersivity, leveling, and compatibility to road marking and floor coatings. view less | |
| TKA-01 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-01 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good adhesion, flexibility, dispersibility, and leveling capabilities while providing good chemical, water, and alcohol resistance. It is ...view more TKA-01 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good adhesion, flexibility, dispersibility, and leveling capabilities while providing good chemical, water, and alcohol resistance. It is commonly used in a variety of applications including exterior and fire-retardant coatings, and road marking paints. view less | |
| TKA-02 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-02 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good adhesion, flexibility, dispersibility, and leveling capabilities while providing good chemical, water, and abrasion resistance. It is...view more TKA-02 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good adhesion, flexibility, dispersibility, and leveling capabilities while providing good chemical, water, and abrasion resistance. It is commonly used in a variety of applications including industrial paints, road marking paints, floor paints, and ship coatings. view less |
