| ACCULIN® 1000 (2071A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1000 is a hard, high melting point polyethylene. | |
| ACCULIN® 1500 (2057A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is an extremely pure, inert, narrow melt point product that exhibits very specific expansion behavior. | |
| ACCULIN® 1500 (2073A) | The International Group, Inc. (IGI Wax) | ACCULIN® 1500 is a hard, low melting point polyethylene. | |
| ACCULIN® 2000 (2074A) | The International Group, Inc. (IGI Wax) | ACCULIN® 2000 is a hard, high melting point polyethylene. | |
| ACCULIN® 500 (2056A) | The International Group, Inc. (IGI Wax) | ACCULIN® 500 is a hard, low melting point polyethylene. | |
| ACCULIN® 600 (2059A) | The International Group, Inc. (IGI Wax) | ACCULIN® 600 is a hard, low melting point polyethylene. | |
| ACCULIN® 655 (2061A) | The International Group, Inc. (IGI Wax) | ACCULIN® 655 is a hard, low melting point polyethylene. | |
| ACCULIN® 725 (2063A) | The International Group, Inc. (IGI Wax) | ACCULIN® 725 is a hard, low melting point polyethylene. | |
| AQUACER 1040 | BYK 毕克 | AQUACER 1040 is a primary polyethylene dispersion for formulating release agents for metal die casting. | |
| AQUACER 1063 | BYK 毕克 | AQUACER 1063 is a polyethylene dispersion to improve the anti-caking properties of hot-melt adhesives and to increase adhesion in dispersion adhesives for the packaging sector. | |
| Chlorinated Polyolefin-YURON CP 20 | Yuron New Material 裕隆新材料 | YURON CP 20 is composed of chlorinated polyolefin and is supplied as a white powder that is immiscible in water. This product is recommended as a binder for plastic or steel coatings. | |
| Dispurez 101 | Incorez Ltd. | Dispurez 101 is a high Tg, hard, crystalline waterborne polyurethane dispersion with excellent chemical resistance. It is suitable for clear protective top coats and lacquers. Upon application, the water evaporates to yield a tough, transparent film with ...view more Dispurez 101 is a high Tg, hard, crystalline waterborne polyurethane dispersion with excellent chemical resistance. It is suitable for clear protective top coats and lacquers. Upon application, the water evaporates to yield a tough, transparent film with good gloss. Films derived from Dispurez 101 exhibit excellent water and chemical resistance. The product exhibits rapid hardness development and is therefore suitable for a wide range of end applications in the surface coatings industries. It is particularly suitable as a hard coating for rigid plastic substrates. view less | Request Sample |
| EBECRYL® 11 | Allnex | EBECRYL® 11 is a polyethylene glycol diacrylate derivative. Ebecryl®11, being 100% water soluble, is designed for use in applications needing this type of solubility. | Request Sample |
| FIPOLDER™ FHP05040 | Polygroup Inc. | FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...view more FIPOLDER™ FHP05040 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. view less | |
| FIPOLDER™ FHP05080 | Polygroup Inc. | FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and con...view more FIPOLDER™ FHP05080 is a high density polyethylene (HDPE) polymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. FIPOLDER™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. view less | |
| FIPOLDER™ HM300 | Polygroup Inc. | FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some applicatio...view more FIPOLDER™ HM300 is a high density polyethylene (HDPE) Polymer in a medium-fine particle powder form. Its minerals are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. FIPOLDER™ powders are well suited for a variety of applications including for use in structural paints and coatings, textiles, soap and cleaners, Etc.. view less | |
| Flexonic™ EN41 E | Lawter | Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The...view more Flexonic™ EN41 E is a polyethylene emulsion that displays scratch, rub, slip and block resistant properties. It is used as an additive in water-based coatings, inks and overprint varnishes and has good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. view less | |
| Flexonic™ W378 E | Lawter | Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueou...view more Flexonic™ W378 E is a polyethylene emulsion that is APE-free and exhibits scratch, rub, slip and block resistant properties. It has minimal effect on gloss, while showing good compatibility with styrene acrylics and acrylics. The product is used in aqueous inks and coatings. view less | |
| Hicoat 37 | Tridev Resins (India) Pvt. Ltd. | Hicoat 37 is a nonionic, polyethylene wax emulsion. It can be added to pigmented or clear coatings to provide rub resistance and improve slip, without detracting from gloss or clarity. The high softening point of the wax contributes to heat and block resi...view more Hicoat 37 is a nonionic, polyethylene wax emulsion. It can be added to pigmented or clear coatings to provide rub resistance and improve slip, without detracting from gloss or clarity. The high softening point of the wax contributes to heat and block resistance. It is highly water dispersible and exhibits good compatibility and stability in aqueous vehicles. It can be used in water-based inks or clear coatings. view less | |
| High Chlorinated Polyethylene-YURON HCPE | Yuron New Material 裕隆新材料 | High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance an...view more High Chlorinated Polyethylene-YURON HCPE is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas. HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less | |
| High Chlorinated Polyethylene-YURON HCPE-M | Yuron New Material 裕隆新材料 | High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance ...view more High Chlorinated Polyethylene-YURON HCPE-M is soluble in aromatic, ester, ketone and ethylene glycol. It has good compatibility with most inorganic and organic pigments additionally, and it has good weather resistance, chemical resistance, oil resistance and ozone resistance. HCPE can replace chlorinated rubber in many application areas. HCPE is mainly used to produce wear resistant, heavy corrosion resistant and self-extinguishing coatings. As coatings, it can be used in chemical equipment, oil field pipelines, offshore facilities, ship coatings, metallurgy and mine, salt industry, fishing ground, wastes treatment, transportation facilities, container and electrical equipment. view less | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1305 | Yuron New Material 裕隆新材料 | High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more High Performance High Chlorinated Polyethylene-YURON HPE 1305 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1505 | Yuron New Material 裕隆新材料 | YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coating...view more YURON HPE 1505 is a high performance, high-chlorinated polyethylene. It is supplied as a white powder and is immiscible in water. This product is mainly used to promote wear resistance, heavy corrosion resistance, and to produce self-extinguishing coatings and high quality printing ink. view less | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1510 | Yuron New Material 裕隆新材料 | High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more High Performance High Chlorinated Polyethylene-YURON HPE 1510 has a viscosity at 25°C that is 40% in xylene at 150-250 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less | |
| High Performance High Chlorinated Polyethylene-YURON HPE 1515 | Yuron New Material 裕隆新材料 | High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesive...view more High Performance High Chlorinated Polyethylene-YURON HPE 1515 has a viscosity at 25°C that is 40% in xylene at 400-600 mPa.s. It has applications that produce wear resistance, heavy corrosion resistance and self-extinguishing coatings, high grade adhesives and high quality printing ink. view less | |
| HP series™ HM200 | Polygroup Inc. | HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements fo...view more HP series™ HM200 is a hot-melt adhesive HDPE powder for interlining purposes. It has a high melting point which contributes to its heat resistance. HP series™ HM080 is designed by a special method of TWO H Chem's own technology to meet the requirements for coating modern textile interlinings and is well suited for paste coatings. view less | |
| Luna-tex RC3940F | DKSH | Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is availab...view more Luna-tex RC3940F is a stable combination of modified PTFE and polyethylene waxes for producing a high abrasion resistant and uniform surface texture for powder coatings. The product offers a very consistent textured surface effect. This product is available in Europe, Asia and North America. view less | Request Sample |
| Micronized Polyethylene Powder (SZ1803) | Huangshan Banner Technology Co., Ltd. | Micronized Polyethylene Powder (SZ1803) is a very fine white thermoplastic polyethylene powder with a particle size between 10 - 15μm. This product is used as a powder coating and effective basic additive in paints, varnishes, masterbatch and metal and ce...view more Micronized Polyethylene Powder (SZ1803) is a very fine white thermoplastic polyethylene powder with a particle size between 10 - 15μm. This product is used as a powder coating and effective basic additive in paints, varnishes, masterbatch and metal and ceramic sintering. view less | |
| POLYBATCH® CRR 3971 | ICO Polymers | POLYBATCH® CRR 3971 is a low density polyethylene masterbatch combined with a chill roll release agent. This solid pellet prevents low density polyethylene (LDPE) from chill roll sticking during extrusion without damaging the adhesion of the resin to the ...view more POLYBATCH® CRR 3971 is a low density polyethylene masterbatch combined with a chill roll release agent. This solid pellet prevents low density polyethylene (LDPE) from chill roll sticking during extrusion without damaging the adhesion of the resin to the substrate. POLYBATCH® CRR 3971 is used in extrusion lamination, coextrusion coating, and for coatings on different substrates such as kraft, board and paper, aluminum foil, and flexible films. It is also used in extrusion coating applications where chill roll adhesion occurs under normal circumstances, and at very high line speeds featuring high chill roll temperatures and use of a glossy chill roll finish. view less | |
| Powder Coatings Adhesion Promoter（SZ07） | Huangshan Banner Technology Co., Ltd. | Powder Coatings Adhesion Promoter（SZ07）(maleic anhydride modified polyetylene) is a white pellet with high reactivity and low residual monomer and gel content. This product can be used as a bridge, of sorts, between non-polar and polar materials to improv...view more Powder Coatings Adhesion Promoter（SZ07）(maleic anhydride modified polyetylene) is a white pellet with high reactivity and low residual monomer and gel content. This product can be used as a bridge, of sorts, between non-polar and polar materials to improve binding and compatibility in thermoplastic powder coatings. view less | |
| SCM Chlorinated Polyethylene Resin | Yan Tai Heng Nuo Chemical Technology Co., Ltd. | SCM Chlorinated Polyethylene Resin, in the form of a powder, is a weather-proofing agent. This product can be used in adhesive tapes and boards. Its assay lies between 30 and 36%. | |
| SP Series™ SHP1500-1 | Polygroup Inc. | SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...view more SP Series™ SHP1500-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. view less | |
| SP Series™ SHP4080-1 | Polygroup Inc. | SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...view more SP Series™ SHP4080-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. view less | |
| SP Series™ SHP8015-1 | Polygroup Inc. | SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory complian...view more SP Series™ SHP8015-1 is a high molecular weight, high density, polyethylene (HMWHDPE) polymer in a fine particle powder form. These unique materials exhibit very high toughness. The SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. These powders are well suited for use in structural paints and coating applications that require anti-slip, structural, or satin and matt finish effects. view less | |
| Ultrafine™ 1000 A | Lawter | Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and c...view more Ultrafine™ 1000 A is a micronized polyethylene wax powder recommended when maximum mar, block and rub resistance are required along with elevated temperatures, slip and re-coatability. It offers a narrow particle size distribution to ease dispersion and create uniformity during processing. Ultrafine™ 1000 A is used in solvent and water-based flexographic and gravure inks, in sheet-fed, UV and metal deco applications and in wood, can, coil and powder coatings. view less | |
| Ultrafine™ 1000PE | Lawter | Ultrafine™ 1000PE is a micronized polyethylene wax that has good rub, gloss and slip properties as well as aqueous and UV coatings that make it ideal for use in sheet-fed, heatset and liquid inks. | |
| Ultrapoly™ 210 A | Lawter | Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earli...view more Ultrapoly™ 210 A is a sheet-fed polyethylene compound that is non-volatile and is a hard-drying and fast setting vehicle. It is recommended in situations that call for mar resistance, slip and abrasion. Ultrapoly™ 210 A protects the film during the earliest phases of the printing process while developing toughness over time. It is ideally used in sheet-fed offset inks, in OPV, metal decorating and in UV inks. view less | |
| Ultrapoly™ 452 E | Lawter | Ultrapoly™ 452 E is a wax compound that is non-volatile and is based on polyethylene wax and vegetable oil. It displays good scratch and rub resistance as well as good slip and gloss. Ultrapoly™ 452 E also has low peppering and a low particle size adds to...view more Ultrapoly™ 452 E is a wax compound that is non-volatile and is based on polyethylene wax and vegetable oil. It displays good scratch and rub resistance as well as good slip and gloss. Ultrapoly™ 452 E also has low peppering and a low particle size adds to good wash out test values and narrow particle size distribution benefits. The wax compound is used in quickset, sheet-fed and heatset inks. view less | |
| Ultrapoly™ 990 E | Lawter | Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in qui...view more Ultrapoly™ 990 E is a wax compound from polyethylene wax and vegetable oil. It has good rub, abrasion and scratch resistance with good slip and anti-blocking benefits. The product also shows good gloss, is non-volatile and is used as a wax compound in quickset, sheet-fed and heatset inks. view less | |
| WPCs Compatibilizer（SZ11） | Huangshan Banner Technology Co., Ltd. | WPCs Compatibilizer（SZ11）(maleic anhydride modified polyethylene) is a white pellet with high reactivity and low residual monomer and gel content. This product can be used as a bridge, of sorts, between wood, plastic and composite non-polar and polar mate...view more WPCs Compatibilizer（SZ11）(maleic anhydride modified polyethylene) is a white pellet with high reactivity and low residual monomer and gel content. This product can be used as a bridge, of sorts, between wood, plastic and composite non-polar and polar materials to improve binding and compatibility in thermoplastic powder coatings. view less |
