| Cariflex™ IR0307 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0307 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0307 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0310 KU Polymer | Kraton Polymers International Ltd. | Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and se...展开 Cariflex™ IR0310 KU Polymer is a solution polymerised polyisoprene with a high cis-1,4 content. It is supplied as a white/transparent solid bale. This product has an high molecular weight. Cariflex™ IR0310 KU Polymer is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 BU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Late...展开 Cariflex™ IR0401 BU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight, and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 BU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Cariflex™ IR0401 SU Latex | Kraton Polymers International Ltd. | Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex ...展开 Cariflex™ IR0401 SU Latex is a water-based emulsion of an anionically polymerized polyisoprene with a high cis-1,4 content, high molecular weight and a high linearity. This product has a light color and low levels of impurities. Cariflex™ IR0401 SU Latex is used in adhesives, coatings, and sealants. 收起 | |
| Chlorinated Rubber-YURON CR-22 | Yuron New Material | YURON CR-22是一种氯化橡胶产品，以白色粉末形式供应。它主要添加到溶剂型粘合剂中。它可以溶解于多数芳香族溶剂中，如甲苯或二甲苯，同时可溶于大多数酯中。 | |
| Chlorinated Rubber-YURON CR-40 | Yuron New Material | YURON CR-40是一种以白色粉末形式供货的氯化橡胶，它用作防腐涂料或胶粘剂的树脂，也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。 | |
| Chlorinated Rubber-YURON CR-400 | Yuron New Material | YURON CR-400是一种氯化橡胶产品，以白色粉末形式供应。主要用于在橡胶和金属应用中使用的粘合剂原料中。它可以溶解于多数芳香族溶剂中，如甲苯或二甲苯，同时可溶于大多数酯中。 | |
| Chlorinated Rubber-YURON CR-90 | Yuron New Material | YURON CR-90是一种氯化橡胶，是不溶于水的白色粉末。它用作防腐涂料或胶粘剂的树脂，也可以和醇酸树脂共用或在胶粘剂配方中和其他树脂共用。 | |
| CV3-2500 | NuSil Silicone Technology 1 | CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive d...展开 CV3-2500 is an optically clear silicone that is has controlled volatility. It is an ideal product for applications that require a low viscosity to create a superior flow and low outgassing. This is how it helps keep condensation from affecting sensitive devices. It can also be utilized as an adhesive for projects involving solar arrays. 收起 | |
| CV3-2640 | NuSil Silicone Technology 1 | CV3-2640 is a static dissipative silicone that has controlled volatility and cures at room temperature. This product can be utilized as shielding for RFI and EMI in space and electronic applications. It can also be used to adhere covers onto housings or f...展开 CV3-2640 is a static dissipative silicone that has controlled volatility and cures at room temperature. This product can be utilized as shielding for RFI and EMI in space and electronic applications. It can also be used to adhere covers onto housings or for any application where grooves require a non-flowable to limited flow material. 收起 | |
| CV4-2289-1 | NuSil Silicone Technology 1 | CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be u...展开 CV4-2289-1 is a thixotropic silicone elastomer that can be used as an adhesive that offers superior tear strength. This silicone also demonstrates flexibility at extremely low temperatures with a stiffening temperature of approximately -115°C. It can be used to protect electronic components, cable harness breakouts, seals, and gaskets from harsh environmental conditions. 收起 | |
| CV7-1142-1 | NuSil Silicone Technology 1 | CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broa...展开 CV7-1142-1 is a non corrosive material that has a white color and it is a non-slumping silicone RTV. It can be used as a caulking, adhesive or sealant that protects sensitive circuits, connectors and switches in space applications. This product has a broad operating temperature range so it can withstand hot and cold conditions. It also can be used for sealing openings in modules or housings where grooves or other configurations require a non-flowable to limited flow material. 收起 | |
| EPM-2461 | NuSil Silicone Technology 1 | EPM-2461 is a dissipative silicone elastomer that has a low volatility and offers low modulus. This elastomer can be used for static dissipation in electronic components and for applications that require low volatility. It can also be utilized in any appl...展开 EPM-2461 is a dissipative silicone elastomer that has a low volatility and offers low modulus. This elastomer can be used for static dissipation in electronic components and for applications that require low volatility. It can also be utilized in any applications where grooves and other configurations require a non-flowing material. 收起 | |
| EPM-2462 | NuSil Silicone Technology 1 | EPM-2462 is a two-part, tan-colored, electrically conductive silicone elastomer that has a 20:1 Mix Ratio (Part A: Part B). This product can be used as a thermally and electrically conductive interface material. It can also be utilized with form-in-place ...展开 EPM-2462 is a two-part, tan-colored, electrically conductive silicone elastomer that has a 20:1 Mix Ratio (Part A: Part B). This product can be used as a thermally and electrically conductive interface material. It can also be utilized with form-in-place conductive gaskets, and for applications that require a material with low volatility. 收起 | |
| EPM-2495 | NuSil Silicone Technology 1 | EPM-2495 is a thermal interface silicone elastomer that has a low volatility and is designed to allow a bond line thickness that is <=50 micron to reduce thermal resistance. This product can be used as an adhesive to bond integrated circuit substrates, ba...展开 EPM-2495 is a thermal interface silicone elastomer that has a low volatility and is designed to allow a bond line thickness that is <=50 micron to reduce thermal resistance. This product can be used as an adhesive to bond integrated circuit substrates, base plates, heat sinks or where grooves or other configurations require a non-flowable material. It is also ideal for applications that would require a low volatility under extreme operating conditions. 收起 | |
| FS-3730-11 | NuSil Silicone Technology 1 | FS-3730-11 is a grey, RTV silicone that is based on a 100 mole % fluorosilicone. This is a strong product as it bonds aggressively to most surfaces. It can be used for bonding and sealing applications that require fuel and/or solvent resistance. It is als...展开 FS-3730-11 is a grey, RTV silicone that is based on a 100 mole % fluorosilicone. This is a strong product as it bonds aggressively to most surfaces. It can be used for bonding and sealing applications that require fuel and/or solvent resistance. It is also able to provide protection or can bond hardware components that are exposed to gasoline or aviation fuels. 收起 | |
| FS-3781 | NuSil Silicone Technology 1 | FS-3781 is a fluorosilicone high consistency elastomer that is strained through a 400-mesh screen (minimum) to ensure freedom from particulate contamination. It can be used for applications that require solvent resistance. It can also be utilized for tran...展开 FS-3781 is a fluorosilicone high consistency elastomer that is strained through a 400-mesh screen (minimum) to ensure freedom from particulate contamination. It can be used for applications that require solvent resistance. It can also be utilized for transfer and compression molding parts such as gasket, stoppers, seals and o-rings. 收起 | |
| GEL-3500 | NuSil Silicone Technology 1 | GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requi...展开 GEL-3500 is a two-part, firm fluorosilicone gel that has a 1:1 mix ratio. It is available in custom formulations to offer various cure schedules, work times, and penetration values that make it convenient to match processing techniques to production requirements. This product is best utilized in applications that would require a gel that has a solvent resistance. 收起 | |
| GEL-8170 | NuSil Silicone Technology 1 | GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics ...展开 GEL-8170 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, encapsulating, backfilling, and dampening situations. It can also be used for photonics applications including HBLED's, photo detectors, flat panel displays and tacking/staking sensitive joints. This gel is ideal for applications that require an operating temperature range of -65°C to 200°C (-85°F to 392°F). 收起 | |
| GEL-8250 | NuSil Silicone Technology 1 | GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in appl...展开 GEL-8250 is a medium to firm silicone gel that has a high purity and is optically clear. This product can be used in applications that require a firm gel for potting, backfilling, encapsulating, and dampening situations. This gel is ideal for use in applications that involve extreme temperatures with an operating temperature range of -115°C to 265°C (-178°F to 500°F). 收起 | |
| Isorubber® | Isogama Industria Quimica Ltda. | Isorubber® é uma dispersão a base de água de polímeros com radicais metilhidrogênio, proporcionando à superfície aplicada características anti-aderentes de alto desempenho. Isorubber® é fácil aplicação. Dispersão estável em temperatura ambiente. Forma uma...展开 Isorubber® é uma dispersão a base de água de polímeros com radicais metilhidrogênio, proporcionando à superfície aplicada características anti-aderentes de alto desempenho. Isorubber® é fácil aplicação. Dispersão estável em temperatura ambiente. Forma uma película anti-aderente de grande estabilidade química e física impedindo a formação de incrustações e aderências dos materiais cujas faces estejam separadas pelo produto. Dependendo do caso, o produto pode ser utilizado puro ou diluído, conforme orientação técnica. Para seu melhor desempenho, o mesmo é formulado com dois componentes onde a relação de uso, em geral, é de 10:1(ver embalagem). Depois de aplicado o produto, é necessário uma etapa na qual é processada a polimerização do produto. 收起 | |
| Isorubber® A04/2 GA Grau Alimentício | Isogama Industria Quimica Ltda. | Isorubber® A04/2 GA Grau Alimentício produto mineral, derivado de petróleo, com cadeia molecular preponderantemente parafínica, podendo ser empregado em vários campos; possui diversas finalidades, principalmente no ramo alimentício, cosmético e farmacêuti...展开 Isorubber® A04/2 GA Grau Alimentício produto mineral, derivado de petróleo, com cadeia molecular preponderantemente parafínica, podendo ser empregado em vários campos; possui diversas finalidades, principalmente no ramo alimentício, cosmético e farmacêutico. Produto não tóxico, sólido e inodoro. Pode ser utilizado nas indústrias cosméticas, farmacêuticas, indústrias alimentícias entre outras. 收起 | |
| LS1-6140 | NuSil Silicone Technology 1 | LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that ...展开 LS1-6140 is an optically clear silicone elastomer that is based on a methyl silicone polymer. It can be used for bonding, casting or compression molding of high performance optical components. This product can also be used for photonics applications that require a low volatility silicone to avoid contamination. 收起 | |
| LS1-6941 | NuSil Silicone Technology 1 | LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components....展开 LS1-6941 is a transparent, pourable silicone that has a 1:1 mix ratio. It can be used as an adhesive or encapsulant for applications that require index matching at 1.41. This product can be used in the injection and transfer molding of optical components. It will cure in contact with most materials common to biomedical assemblies. 收起 | |
| Pergut® B 10 | Covestro | Pergut® B 10 is a chlorinated rubber used as a binder for, among other things, anticorrosion coatings. | |
| Pergut® B 20 | Covestro | Pergut® B 20 is a chlorinated rubber used as a binder for, among other things, anticorrosion-, concrete floor coatings and roadmarking paints. | |
| Pergut® S 10 | Covestro | Pergut® S 10 is a chlorinated rubber used as the binder for, among other things, anticorrosion coatings. | |
| Pergut® S 130 | Covestro | Pergut® S 130 is a chlorinated rubber used as a binder for, among other things, adhesives. | |
| Pergut® S 170 | Covestro | Pergut® S 170 is a chlorinated rubber used as a binder for, among other things, adhesives. | |
| Pergut® S 20 | Covestro | Pergut® S 20 is a chlorinated rubber used a binder for, among other things, anticorrosion-, concrete floor coatings and roadmarking paints. | |
| Pergut® S 40 | Covestro | Pergut® S 40 is a chlorinated rubber used as a binder for anti-corrosion coatings; combination binder for e.g. alkyd resins, acrylates and ketone resins. | |
| Pergut® S 5 | Covestro | Pergut® S 5 is a chlorinated rubber used as a binder for anti-corrosion coatings; combination binder for e.g. alkyd resins, acrylates and ketone resins. | |
| Pergut® S 90 | Covestro | Pergut® S 90 is a chlorinated rubber used as a binder for, among other things, swimming pool and concrete coating. | |
| R-2160 | NuSil Silicone Technology 1 | R-2160 is a two-part, red, pourable silicone system that cures at room temperature or rapidly with heat. This product has a high tear strength and good physical properties. It is ideal for use in potting connectors, cable harness breakouts, molded high vo...展开 R-2160 is a two-part, red, pourable silicone system that cures at room temperature or rapidly with heat. This product has a high tear strength and good physical properties. It is ideal for use in potting connectors, cable harness breakouts, molded high voltage terminals. seals and gaskets due to its high physical strength. It is best used for applications that require an operating temperature range of -65°C to 315°C (-85°F to 600°F). 收起 | |
| R-2165 | NuSil Silicone Technology 1 | R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applicati...展开 R-2165 is a thermally conductive, silicone, potting elastomer that is pourable, self-leveling, and cures at room temperature. This product has enhanced thermal conductivity for removal of heat and improved reliability. It can be used in multiple applications such as potting for sensors, relays, and other electronic components that require protection from vibration and other harsh environmental conditions. 收起 | |
| R-2175 | NuSil Silicone Technology 1 | R-2175 is a two-part, black, pourable, self-leveling silicone potting elastomer that cures at room temperature. The low viscosity of this product allows for the potting of complex geometries without entrapping air. It is thermally stable, flowable, and ha...展开 R-2175 is a two-part, black, pourable, self-leveling silicone potting elastomer that cures at room temperature. The low viscosity of this product allows for the potting of complex geometries without entrapping air. It is thermally stable, flowable, and has several applications which include potting for connectors, sensors, relays, power devices and other electronic components that require protection from shock, vibration and other environmental hazards. 收起 | |
| R-2370 | NuSil Silicone Technology 1 | R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight ...展开 R-2370 is a two-part, RTV silicone rubber foam that has a 100:6 Mix Ratio (Base: Catalyst). It yields a low density silicone rubber foam when catalyzed. It is best utilized in shock and vibration dampening situations that require a flexible, light weight foam with exceptional electrical and thermal properties. 收起 | |
| R-2380 | NuSil Silicone Technology 1 | R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam...展开 R-2380 is a two-part, RTV silicone rubber foam that yields a medium density, and has a 100:6 Mix Ratio (Base: Catalyst). This product is specifically designed to be used in vibration and shock dampening situations that require a lightweight, flexible foam that also has exceptional thermal and electrical properties. 收起 | |
| R-2550 | NuSil Silicone Technology 1 | R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coa...展开 R-2550 is a translucent RTV silicone elastomer has a wide service temperature range. It can be utilized as a heat shielding material for potting, sealing and bonding applications. This product will also be useful in aerospace applications for ablative coatings that require a material that pours. It can withstand extreme temperatures, operating in a range of -115 to 260°C (-178 to 500°F). 收起 | |
| R-3930 | NuSil Silicone Technology 1 | R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for...展开 R-3930 is a one-part RTV silicone elastomer dispersed in tert butyl acetate and the slight addition of heat will accelerate the curing process. It is designed for spraying, dip casting, and RTV curing of thin elastomeric films. It can also be utilized for bonding, coating, and sealing applications that require solvent and/or fuel resistance. It bonds aggressively to most surfaces and can help minimize ice adhesion. 收起 | |
| R21-2615 | NuSil Silicone Technology 1 | R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for mak...展开 R21-2615 is a high durometer silicone elastomer that is flowable and optically clear. This product can be used in any application that requires a high durometer, flowable material. It can be used to encapsulating and potting electronic devices and for making molded parts. 收起 | |
| R3-2160 | NuSil Silicone Technology 1 | R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for pottin...展开 R3-2160 is a two-part, pourable silicone system that has a high tear strength and good physical properties. It is designed for enhance performance in extreme high and low temperatures. The ideal use for this high temperature adhesive/sealant is for potting connectors, seals and gaskets, molded high voltage terminals, and cable harness breakouts. 收起 | |
| R7-3521-11 | NuSil Silicone Technology 1 | R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stop...展开 R7-3521-11 is a dark grey, 50 mole % fluorosilicone elastomer that can be cured with heat in an oven or heat lamp, and can also be cured at room temperature. This product has a 1:1 Mix Ratio (Part A:B). It can be used for molding parts such as seals, stoppers, and O-rings. It can also be used for applications that require a good solvent resistance. 收起 | |
| SCV-2585 | NuSil Silicone Technology 1 | SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards...展开 SCV-2585 is a silicone elastomer that features Ultra Low OutgassingTM and also has a high tear strength. This makes it an ideal product to provide protection to electronic components against shock, vibration, moisture, dust and other environmental hazards. It can also perform under a broad temperature range for electronic and space applications. 收起 | |
| SCV-2586 | NuSil Silicone Technology 1 | SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels an...展开 SCV-2586 a potting and encapsulated silicone elastomer that features Ultra Low OutgassingTM. It can be applied to provide radiation resistance, thermal and oxidation stability. This product is especially useful to bond solar cells to solar array panels and for applications that require a product with minimal volatility. 收起 | |
| SFM5-2350 | NuSil Silicone Technology 1 | SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibrati...展开 SFM5-2350 is a flame retardant, RTV silicone foam that yields a medium density. It can be utilized as a flame retardant seal and for intricate back-filling due to a low viscosity and longer work time. This product can also be utilized in shock and vibration dampening situations that require a lightweight, flexible foam, and provides excellent thermal insulation and radiation resistance. It is useful where stability at higher and lower temperatures is required. 收起 | |
| Tackmelt A 34 MED | Ichemco | Tackmelt A 34 MED is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. This product has a viscosity at 150°C of 7000-10,000 mPa.s and a viscosity at 185°C of 1500-2500 mPa.s. Tackmelt A 34 MED is most commonly used...展开 Tackmelt A 34 MED is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. This product has a viscosity at 150°C of 7000-10,000 mPa.s and a viscosity at 185°C of 1500-2500 mPa.s. Tackmelt A 34 MED is most commonly used in medical applications where skin contact is expected. 收起 | |
| Tackmelt A 43 MED | Ichemco | Tackmelt A 43 MED is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. This product has a viscosity at 150°C of 6000-8000 mPa.s and a viscosity at 185°C of 1200-2000 mPa.s. Tackmelt A 43 MED is most commonly used i...展开 Tackmelt A 43 MED is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. This product has a viscosity at 150°C of 6000-8000 mPa.s and a viscosity at 185°C of 1200-2000 mPa.s. Tackmelt A 43 MED is most commonly used in medical applications where skin contact is expected. 收起 | |
| Tackmelt A 44 | Ichemco | Tackmelt A 44 is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. It contains special antioxidants to guarantee a good ageing resistance. Tackmelt A 44 is most commonly used in label and double-sided adhesive tape...展开 Tackmelt A 44 is a hot melt pressure sensitive adhesive based on SIS synthetic rubber and synthetic resins. It contains special antioxidants to guarantee a good ageing resistance. Tackmelt A 44 is most commonly used in label and double-sided adhesive tape applications. 收起 | |
| Tackmelt A 44 UV | Ichemco | Tackmelt A 44 UV is a hot-melt adhesive, based on SIS synthetic rubber and synthetic resins. It contains special antioxidants and UV stabilizer to guarantee a good ageing and light resistance. This product has a viscosity at 150°C of 7000-13,000 mPa.s and...展开 Tackmelt A 44 UV is a hot-melt adhesive, based on SIS synthetic rubber and synthetic resins. It contains special antioxidants and UV stabilizer to guarantee a good ageing and light resistance. This product has a viscosity at 150°C of 7000-13,000 mPa.s and a viscosity at 185°C of 2000-5000 mPa.s. Tackmelt A 44 UV is most commonly used in label and double-sided adhesive tape applications. 收起 | |
| Tackmelt A40 | Ichemco | Tackmelt A40 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 12,000-20,000 mPa.s and a viscosity at 185°C of 4000-8000 mPa.s. Tackmelt A40 is most commonly used in permanent label production applications. | |
| Tackmelt A43 A | Ichemco | Tackmelt A43 A is an amber-colored hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 17,000-27,000 mPa.s and a viscosity at 185°C of 4000-6000 mPa.s. Tackmelt A43 A is most commonly used in label and double-sided tape produc...展开 Tackmelt A43 A is an amber-colored hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 17,000-27,000 mPa.s and a viscosity at 185°C of 4000-6000 mPa.s. Tackmelt A43 A is most commonly used in label and double-sided tape production applications. 收起 | |
| Tackmelt A45 | Ichemco | Tackmelt A45 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 18,000-30,000 mPa.s and a viscosity at 180°C of 6000-9000 mPa.s. Tackmelt A45 is most commonly used in label and double-sided tape production applications. | |
| Tackmelt A46 M | Ichemco | Tackmelt A46 M is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 12,000-16,000 mPa.s and a viscosity at 185°C of 3000-7000 mPa.s. Tackmelt A46 M is most commonly used in label and double-sided tape production applications...展开 Tackmelt A46 M is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 12,000-16,000 mPa.s and a viscosity at 185°C of 3000-7000 mPa.s. Tackmelt A46 M is most commonly used in label and double-sided tape production applications. 收起 | |
| Tackmelt A48 M2 | Ichemco | Tackmelt A48 M2 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 60,000-90,000 mPa.s and a viscosity at 180°C of 16,000-25,000 mPa.s. Tackmelt A48 M2 is most commonly used in adhesive applications where high tack, cohesi...展开 Tackmelt A48 M2 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 60,000-90,000 mPa.s and a viscosity at 180°C of 16,000-25,000 mPa.s. Tackmelt A48 M2 is most commonly used in adhesive applications where high tack, cohesion, and thermal resistance are required. 收起 | |
| Tackmelt A49 | Ichemco | Tackmelt A49 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 20,000-40,000 mPa.s and a viscosity at 185°C of 4000-8000 mPa.s. Tackmelt A49 is most commonly used in label and double-sided tape production applications. | |
| Tackmelt HM 10 A | Ichemco | Tackmelt HM 10 A is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 25,000-35,000 mPa.s and a viscosity at 185°C of 5000-10,000 mPa.s. Tackmelt HM 10 A is most commonly used in dielectric tape production applications. | |
| Tackmelt HM 15 A | Ichemco | Tackmelt HM 15 A is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 50,000-80,000 mPa.s and a viscosity at 180°C of 20,000-25,000 mPa.s. Tackmelt HM 15 A is most commonly used in double-sided adhesive tape, as well as insu...展开 Tackmelt HM 15 A is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 50,000-80,000 mPa.s and a viscosity at 180°C of 20,000-25,000 mPa.s. Tackmelt HM 15 A is most commonly used in double-sided adhesive tape, as well as insulating foam and panel production applications. 收起 | |
| Tackmelt HM 15 B | Ichemco | Tackmelt HM 15 B is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 60,000-90,000 mPa.s and a viscosity at 180°C of 15,000-20,000 mPa.s. Tackmelt HM 15 B is most commonly used in double-sided adhesive tape, as well as insu...展开 Tackmelt HM 15 B is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 60,000-90,000 mPa.s and a viscosity at 180°C of 15,000-20,000 mPa.s. Tackmelt HM 15 B is most commonly used in double-sided adhesive tape, as well as insulating foam and panel production applications. 收起 | |
| Tackmelt R 002 | Ichemco | Tackmelt R 002 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 90,000-160,000 mPa.s and a viscosity at 180°C of 20,000-40,000 mPa.s. Tackmelt R 002 is most commonly used in opaque removable film and paper label producti...展开 Tackmelt R 002 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 90,000-160,000 mPa.s and a viscosity at 180°C of 20,000-40,000 mPa.s. Tackmelt R 002 is most commonly used in opaque removable film and paper label production applications. 收起 | |
| Tackmelt R 004 | Ichemco | Tackmelt R 004 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 65,000-80,000 mPa.s and a viscosity at 185°C of 11,000-20,000 mPa.s. Tackmelt R 004 is most commonly used in opaque removable film and paper label productio...展开 Tackmelt R 004 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 65,000-80,000 mPa.s and a viscosity at 185°C of 11,000-20,000 mPa.s. Tackmelt R 004 is most commonly used in opaque removable film and paper label production applications. 收起 | |
| Tackmelt R 008 | Ichemco | Tackmelt R 008 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 100,000-130,000 mPa.s and a viscosity at 185°C of 12,000-20,000 mPa.s. Tackmelt R 008 is most commonly used in opaque removable film and paper label product...展开 Tackmelt R 008 is a hot melt pressure sensitive adhesive. This product has a viscosity at 150°C of 100,000-130,000 mPa.s and a viscosity at 185°C of 12,000-20,000 mPa.s. Tackmelt R 008 is most commonly used in opaque removable film and paper label production applications. 收起 | |
| Tacksol 10/82 B | Ichemco | Tacksol 10/82 B is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 21-23%, a tack of 1-4 cm, and a peel of 400-600 g/in. Tacksol 10/82 B is most commonly used in protective film and tape production ap...展开 Tacksol 10/82 B is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 21-23%, a tack of 1-4 cm, and a peel of 400-600 g/in. Tacksol 10/82 B is most commonly used in protective film and tape production applications. 收起 | |
| Tacksol 10/83 B | Ichemco | Tacksol 10/83 B is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 21-23%, a tack of 1-3 cm, and a peel of 500-1200 g/in. Tacksol 10/83 B is most commonly used in protective film and tape production app...展开 Tacksol 10/83 B is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 21-23%, a tack of 1-3 cm, and a peel of 500-1200 g/in. Tacksol 10/83 B is most commonly used in protective film and tape production applications. 收起 | |
| Tacksol 10/83 EPM | Ichemco | Tacksol 10/83 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 17%, a tack of 2-6 cm, and a peel of 600-1000 g/in. Tacksol 10/83 EPM is most commonly used in the production of protective films and...展开 Tacksol 10/83 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 17%, a tack of 2-6 cm, and a peel of 600-1000 g/in. Tacksol 10/83 EPM is most commonly used in the production of protective films and tapes formulated for use on rough surfaces. 收起 | |
| Tacksol 10/84 | Ichemco | Tacksol 10/84 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 5-10 cm, and a peel of 500-1000 g/in. Tacksol 10/84 is most commonly used in protective film and tape production applic...展开 Tacksol 10/84 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 5-10 cm, and a peel of 500-1000 g/in. Tacksol 10/84 is most commonly used in protective film and tape production applications. 收起 | |
| Tacksol 10/85 | Ichemco | Tacksol 10/85 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 14-16%, a tack of 1 cm, and a peel of 750 g/in. Tacksol 10/85 is most commonly used in protective film and tape production applications. | |
| Tacksol 10/85 HST | Ichemco | Tacksol 10/85 HST is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 23-27%, a tack of 0.5-5 cm, and a peel of 600-800 g/in. Tacksol 10/85 HST is most commonly used in protective pressure sensitive film...展开 Tacksol 10/85 HST is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 23-27%, a tack of 0.5-5 cm, and a peel of 600-800 g/in. Tacksol 10/85 HST is most commonly used in protective pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/86 | Ichemco | Tacksol 10/86 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 19-21%, a tack of 2-4 cm, and a peel of 800-1100 g/in. Tacksol 10/86 is most commonly used in pressure sensitive film and tape production...展开 Tacksol 10/86 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 19-21%, a tack of 2-4 cm, and a peel of 800-1100 g/in. Tacksol 10/86 is most commonly used in pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/86 EPM | Ichemco | Tacksol 10/86 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 16-18%, a tack of 3-6 cm, and a peel of 200-600 g/in. Tacksol 10/86 EPM is most commonly used in protective pressure sensitive film a...展开 Tacksol 10/86 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 16-18%, a tack of 3-6 cm, and a peel of 200-600 g/in. Tacksol 10/86 EPM is most commonly used in protective pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/86 HS | Ichemco | Tacksol 10/86 HS is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 2-4 cm, and a peel of 700-1700 g/in. Tacksol 10/86 HS is most commonly used in protective pressure sensitive film an...展开 Tacksol 10/86 HS is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 2-4 cm, and a peel of 700-1700 g/in. Tacksol 10/86 HS is most commonly used in protective pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/86 HSE | Ichemco | Tacksol 10/86 HSE is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-32%, a tack of 3 cm, and a peel of 950 g/in. Tacksol 10/86 HSE is most commonly used in protective pressure sensitive film and tap...展开 Tacksol 10/86 HSE is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-32%, a tack of 3 cm, and a peel of 950 g/in. Tacksol 10/86 HSE is most commonly used in protective pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/86 HT | Ichemco | Tacksol 10/86 HT is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-32%, a tack of 0.5-3 cm, and a peel of 1000-1300 g/in. Tacksol 10/86 HT is most commonly used in protective pressure sensitive film...展开 Tacksol 10/86 HT is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-32%, a tack of 0.5-3 cm, and a peel of 1000-1300 g/in. Tacksol 10/86 HT is most commonly used in protective pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/86 HTE | Ichemco | Tacksol 10/86 HTE is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-32%, a tack of 2 cm, and a peel of 1150 g/in. Tacksol 10/86 HTE is most commonly used in protective pressure sensitive film and ta...展开 Tacksol 10/86 HTE is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-32%, a tack of 2 cm, and a peel of 1150 g/in. Tacksol 10/86 HTE is most commonly used in protective pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/86 HTM | Ichemco | Tacksol 10/86 HTM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 16-18%, a tack of 3 cm, and a peel of 600 g/in. Tacksol 10/86 HTM is most commonly used in protective pressure sensitive film and tap...展开 Tacksol 10/86 HTM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 16-18%, a tack of 3 cm, and a peel of 600 g/in. Tacksol 10/86 HTM is most commonly used in protective pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/88 | Ichemco | Tacksol 10/88 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 31-33%, a tack of 2-5 cm, and a peel of 700-900 g/in. Tacksol 10/88 is most commonly used in protective pressure sensitive film and tape ...展开 Tacksol 10/88 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 31-33%, a tack of 2-5 cm, and a peel of 700-900 g/in. Tacksol 10/88 is most commonly used in protective pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/89 EPM | Ichemco | Tacksol 10/89 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 16-18%, a tack of 1-3 cm, and a peel of 1000-1600 g/in. Tacksol 10/89 EPM is most commonly used in protective pressure sensitive film...展开 Tacksol 10/89 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 16-18%, a tack of 1-3 cm, and a peel of 1000-1600 g/in. Tacksol 10/89 EPM is most commonly used in protective pressure sensitive film and tape production applications. 收起 | |
| Tacksol 10/89 HS | Ichemco | Tacksol 10/89 HS is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 1-3 cm, and a peel of 1000-1600 g/in. Tacksol 10/89 HS is most commonly used in the production of protective films a...展开 Tacksol 10/89 HS is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 1-3 cm, and a peel of 1000-1600 g/in. Tacksol 10/89 HS is most commonly used in the production of protective films and tapes formulated for use on rough surfaces. 收起 | |
| Tacksol 10/89 HS EPM | Ichemco | Tacksol 10/89 HS EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 2 cm, and a peel of 1300 g/in. Tacksol 10/89 HS EPM is most commonly used in the production of protective tapes ...展开 Tacksol 10/89 HS EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, a tack of 2 cm, and a peel of 1300 g/in. Tacksol 10/89 HS EPM is most commonly used in the production of protective tapes and films used on rough surfaces. 收起 | |
| Tacksol 45 TR | Ichemco | Tacksol 45 TR is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 42-44%, a tack of 5-15 cm, and a peel of 2200-3300 g/in. Tacksol 45 TR is most commonly used in fabric and porous substrate applications. | |
| Tacksol 45 TR M | Ichemco | Tacksol 45 TR M is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 40-42%, a tack of 5-10 cm, and a peel of 1700-2500 g/in. Tacksol 45 TR M is most commonly used in fabric and porous substrate applicati...展开 Tacksol 45 TR M is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 40-42%, a tack of 5-10 cm, and a peel of 1700-2500 g/in. Tacksol 45 TR M is most commonly used in fabric and porous substrate applications. 收起 | |
| Tacksol A 48 M2 | Ichemco | Tacksol A 48 M2 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 53-57%, a tack of 10-20 cm, and a peel of 2000-3000 g/in. Tacksol A 48 M2 is most commonly used in applications requiring higher tack, ...展开 Tacksol A 48 M2 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 53-57%, a tack of 10-20 cm, and a peel of 2000-3000 g/in. Tacksol A 48 M2 is most commonly used in applications requiring higher tack, cohesion, and thermal stability. 收起 | |
| Tacksol A 48 M3 | Ichemco | Tacksol A 48 M3 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 50-54%, a tack of greater than 15 cm, and a peel of 1900-2200 g/in. Tacksol A 48 M3 is most commonly used in applications requiring hig...展开 Tacksol A 48 M3 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 50-54%, a tack of greater than 15 cm, and a peel of 1900-2200 g/in. Tacksol A 48 M3 is most commonly used in applications requiring higher tack, cohesion, and thermal stability. 收起 | |
| Tacksol A 48 M4 | Ichemco | Tacksol A 48 M4 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 53-57%, a tack of 5-10 cm, and a peel of 1800-2500 g/in. Tacksol A 48 M4 is most commonly used in applications requiring higher tack, c...展开 Tacksol A 48 M4 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 53-57%, a tack of 5-10 cm, and a peel of 1800-2500 g/in. Tacksol A 48 M4 is most commonly used in applications requiring higher tack, cohesion, and thermal stability. 收起 | |
| Tacksol ER 19 | Ichemco | Tacksol ER 19 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 18-20%. Tacksol ER 19 is most commonly used in adhesive and primer formulation applications. | |
| Tacksol IS 56M2 | Ichemco | Tacksol IS 56M2 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 18-20%, has a tack of 6-10 cm, and has a peel of 1800-2200 g/in. Tacksol IS 56M2 is most commonly used in applications where high shear...展开 Tacksol IS 56M2 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 18-20%, has a tack of 6-10 cm, and has a peel of 1800-2200 g/in. Tacksol IS 56M2 is most commonly used in applications where high shear, high adhesivity, and heat resistance are required. 收起 | |
| Tacksol IS 57 | Ichemco | Tacksol IS 57 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 55-58% and a peel of 2500-3000 g/in. Tacksol IS 57 is most commonly used in applications where high shear, high adhesivity, and high shea...展开 Tacksol IS 57 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 55-58% and a peel of 2500-3000 g/in. Tacksol IS 57 is most commonly used in applications where high shear, high adhesivity, and high shear balance are required. 收起 | |
| Tacksol KR 30 | Ichemco | Tacksol KR 30 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-32%, has a tack of 4-8 cm, and a peel of 1800-2200 g/in. Tacksol KR 30 is most commonly used in applications where high cohesion, tack...展开 Tacksol KR 30 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-32%, has a tack of 4-8 cm, and a peel of 1800-2200 g/in. Tacksol KR 30 is most commonly used in applications where high cohesion, tack, peel adhesion, and heat resistance are required. 收起 | |
| Tacksol NIS 12 | Ichemco | Tacksol NIS 12 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 33-37%, has a tack of 1-3 cm, and a peel of greater than 1900 g/in. Tacksol NIS 12 is most commonly used in applications where high adhe...展开 Tacksol NIS 12 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 33-37%, has a tack of 1-3 cm, and a peel of greater than 1900 g/in. Tacksol NIS 12 is most commonly used in applications where high adhesivity, high adhesion, and moderate cohesion are required, such as double-sided films for moquettes. 收起 | |
| Tacksol PACK 43 TR | Ichemco | Tacksol PACK 43 TR is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 37-41%, has a tack of 10 cm, and a peel of greater than 1900 g/in. Tacksol PACK 43 TR is most commonly used in fabric and porous sub...展开 Tacksol PACK 43 TR is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 37-41%, has a tack of 10 cm, and a peel of greater than 1900 g/in. Tacksol PACK 43 TR is most commonly used in fabric and porous substrate applications. 收起 | |
| Tacksol SM 3 | Ichemco | Tacksol SM 3 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-34%, has a tack of 5-15 cm, and a peel of greater than 1000-2000 g/in. Tacksol SM 3 is most commonly used in fabric and porous substrat...展开 Tacksol SM 3 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 30-34%, has a tack of 5-15 cm, and a peel of greater than 1000-2000 g/in. Tacksol SM 3 is most commonly used in fabric and porous substrate applications. 收起 | |
| Tacksol SM3 EPM | Ichemco | Tacksol SM3 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, has a tack of 5-15 cm, and a peel of greater than 1000-2000 g/in. Tacksol SM3 EPM is most commonly used in mono and double-adhe...展开 Tacksol SM3 EPM is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 29-31%, has a tack of 5-15 cm, and a peel of greater than 1000-2000 g/in. Tacksol SM3 EPM is most commonly used in mono and double-adhesive foam and protective film production applications. 收起 | |
| Tacksol SPR 33 | Ichemco | Tacksol SPR 33 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 32-34%. Tacksol SPR 33 is most commonly used spray application development applications. | |
| Tacksol TT 5 | Ichemco | Tacksol TT 5 is a solventborne, rubber-based pressure sensitive adhesive. This product has a total solids content of 27-31%, has a tack of 3 cm, and has a peel of 700 g/in. Tacksol TT 5 is most commonly used in masking tape production applications. |
