| Opalion 2010 | Opalion | Opalion 2010 is a dispersion of very high crosslinking copolymers of esters, acrylic and vinyl. It is used as a binder for printing and resinated fabric, providing a soft hand and excellent wash resistance. | |
| Opalion Binder I | Opalion | Opalion Binder I is a micro acrylic polymer and impregnating resin. It is for use as an impregnation for leather flower that gives an excellent break and good interior filling. It reaches the same leather fibers and can be used for natural finishes. | |
| Organosilane IC301 | Dalian Onichem Co., Ltd. | Organosilane IC301 is an isocyanate silane which is typically used for silylated prepolymers like SPUR or silane modification of other polymers. It may also be used as an adhesion promoter for difficult substrates like nylon, by interacting with the surfa...veja mais Organosilane IC301 is an isocyanate silane which is typically used for silylated prepolymers like SPUR or silane modification of other polymers. It may also be used as an adhesion promoter for difficult substrates like nylon, by interacting with the surface via its silane or NCO functionality. veja menos | Request Sample |
| Organosilane IC302 | Dalian Onichem Co., Ltd. | Organosilane IC302 is an isocyanate silane typically used for silylated prepolymers such as SPUR or silane modification of other polymers. It is used as an adhesion promoter for difficult substrates like nylon, by interacting with the surface via its sila...veja mais Organosilane IC302 is an isocyanate silane typically used for silylated prepolymers such as SPUR or silane modification of other polymers. It is used as an adhesion promoter for difficult substrates like nylon, by interacting with the surface via its silane or NCO functionality. veja menos | Request Sample |
| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...veja mais PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. veja menos | |
| PEO-1 | Sumitomo Seika Chemicals Co., Ltd. | PEO-1 is a nonionic water-soluble thermoplastic polymer. PEO-1 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-2 | Sumitomo Seika Chemicals Co., Ltd. | PEO-2 is a nonionic water-soluble thermoplastic polymer. PEO-2 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-3 | Sumitomo Seika Chemicals Co., Ltd. | PEO-3 is a nonionic water-soluble thermoplastic polymer. PEO-3 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-4 | Sumitomo Seika Chemicals Co., Ltd. | PEO-4 is a nonionic water-soluble thermoplastic polymer. PEO-4 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| Pergut® B 10 | Covestro | Uma borracha clorada usada como aglutinante para, entre outras coisas, revestimentos anticorrosivos. | |
| Pergut® B 20 | Covestro | Uma borracha clorada usada como aglutinante para, entre outras coisas, revestimentos anticorrosivos e de pisos de concreto e tintas para marcação de estradas. | |
| Pergut® S 10 | Covestro | Uma borracha clorada usada como aglutinante para, entre outras coisas, revestimentos anticorrosivos. | |
| Pergut® S 130 | Covestro | Uma borracha clorada usada como aglutinante para, entre outras coisas, adesivos. | |
| Pergut® S 170 | Covestro | Uma borracha clorada usada como aglutinante para, entre outras coisas, adesivos. | |
| Pergut® S 20 | Covestro | Uma borracha clorada usada como aglutinante para, entre outras coisas, revestimentos anticorrosivos e de pisos de concreto e tintas para marcação de estradas. | |
| Pergut® S 40 | Covestro | Uma borracha clorada usada como aglutinante para revestimentos anti-corrosão; aglutinante de combinação para, por exemplo, resinas alquídicas, acrilatos e resinas de cetona. | |
| Pergut® S 5 | Covestro | Uma borracha clorada usada como aglutinante para revestimentos anti-corrosão; aglutinante de combinação para, por exemplo, resinas alquídicas, acrilatos e resinas de cetona. | |
| Pergut® S 90 | Covestro | Uma borracha clorada usada como aglutinante para, entre outras coisas, revestimentos de piscinas e de concreto. | |
| Phenoxy PK™FE | Gabriel Performance Products | Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...veja mais Phenoxy PK™FE has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™FE may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™FE is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. veja menos | |
| Phenoxy PK™HA | Gabriel Performance Products | Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...veja mais Phenoxy PK™HA has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HA may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HA is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. veja menos | |
| Phenoxy PK™HB | Gabriel Performance Products | Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins...veja mais Phenoxy PK™HB has a low viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HB may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HB is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. veja menos | |
| Phenoxy PK™HH | Gabriel Performance Products | Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resin...veja mais Phenoxy PK™HH has a high viscosity compared to most phenoxy resins. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). Phenoxy PK™HH may also be formulated in single-pack epoxies containing latent hardeners, such as dicyandiamide, providing improved toughness and adhesive strength on substrates when properly cured. Phenoxy PK™HH is soluble in many polar, aprotic solvents such as MEK, cyclohexanone, and glycol ethers. veja menos | |
| Phenoxy PK™HM-301 | Gabriel Performance Products | Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent...veja mais Phenoxy PK™HM-301 is a solid-grade phenoxy PKHC resin melt blended with an oligomeric polyester polyol containing primary hydroxyl functional groups. Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, and carbon fibers, and plastics such as nylon and polyester (PET). PK™HM-301 provides for improved reactivity due to the presence of primary hydroxyls and the lower glass transition temperature of the alloy. PK™HM-301 has a glass transition temperature of about 35 °C which imparts improved solids/viscosity ratios in common solvents like MEK. Coatings of PK™HM-301 exhibit high levels of flexibility and formability when appropriately cured. veja menos | |
| Phenoxy PK™HP-80 | Gabriel Performance Products | Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, ...veja mais Phenoxy PK™HP-80 is a micronized powder–grade Phenoxy resin with a particle size of approximately 70 microns. Phenoxy resins (poly hydroxyl ethers) are tough, ductile, amorphous polymers having excellent thermal stability, adhesion and cohesion strength, and excellent vapor barrier properties. Phenoxy resins also react with cross-linkers like isocyanates, phenolic and melamine resins along the backbone hydroxyl groups. PK™HP-80 provides for ease of incorporation into liquid resins due to its high surface area; recommended levels of PKHP-80 incorporated into epoxy resins are 5 to 25% depending on the desired mix viscosity. veja menos | |
| Picassian® AC-213 | Stahl Polymers | Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties...veja mais Picassian® AC-213 is a waterbased anionic pure acrylic copolymer emulsion agent that is used in adhesives, textile coatings, and industrial shoe polish. It has good adhesion properties, good water resistance properties, good humidity resistance properties, and improves scrub resistance properties. veja menos | |
| Pinerez® 2490 | Lawter | Pinerez® 2490 is a tackifier resin that boosts adhesion and tack in a variety of hot melt and solvent-based adhesives. It is commonly used in pavement coatings. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt ...veja mais Pinerez® 2490 is a tackifier resin that boosts adhesion and tack in a variety of hot melt and solvent-based adhesives. It is commonly used in pavement coatings. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive applications. Among the applications in which it is used are solvents, water-based flooring adhesives and construction adhesives. veja menos | |
| Pinerez® 7024 E | Lawter | Pinerez® 7024 E is a tackifier resin that shows compatibility with various polymers, is stable and is ideally suited to improve adhesion in flooring adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt a...veja mais Pinerez® 7024 E is a tackifier resin that shows compatibility with various polymers, is stable and is ideally suited to improve adhesion in flooring adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive applications. Among the applications in which it is used are solvents, water-based flooring adhesives and construction adhesives. veja menos | |
| Pinerez® 9089 | Lawter | Pinerez® 9089 is a tackifier resin that helps to improve tack in hot melt adhesives and also functions as a cure accelerator in rubber-based adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive ...veja mais Pinerez® 9089 is a tackifier resin that helps to improve tack in hot melt adhesives and also functions as a cure accelerator in rubber-based adhesives. The Pinerez® resin series provide enhanced adhesive performance in solvent-based and hot melt adhesive applications. Among the applications in which it is used are solvents, water-based flooring adhesives and construction adhesives. veja menos | |
| Policure 5000 | Polidur San Luis | Policure 5000 is unneutralized Trimethylolpropane triacrylated and is a high linking cross polymer. This product presents excellent cured and film hardness and good viscosity reduction. It is for use in varnishes and pigmented paints for wood, Inks and va...veja mais Policure 5000 is unneutralized Trimethylolpropane triacrylated and is a high linking cross polymer. This product presents excellent cured and film hardness and good viscosity reduction. It is for use in varnishes and pigmented paints for wood, Inks and varnishes for plastics, paper and glass. veja menos | |
| Policure 5010 | Polidur San Luis | Policure 5010 is Trimethylolpropane triacrylated that provides excellent cured and film hardness, high crosslinking monomer and good viscosity reduction. It is for use in varnishes and pigmented paints for wood and inks and varnishes for plastics, paper a...veja mais Policure 5010 is Trimethylolpropane triacrylated that provides excellent cured and film hardness, high crosslinking monomer and good viscosity reduction. It is for use in varnishes and pigmented paints for wood and inks and varnishes for plastics, paper and glass. veja menos | |
| Polimer 3100 | Polidur San Luis | Polimer 3100 is Polyesther acrylated at 100% that provides a good curing speed, low film hardness and excellent gloss. It is for use in inks and varnishes for plastics, paper and glass, varnishes and lacquers for wood and as a plasticizer of epoxy acrylat...veja mais Polimer 3100 is Polyesther acrylated at 100% that provides a good curing speed, low film hardness and excellent gloss. It is for use in inks and varnishes for plastics, paper and glass, varnishes and lacquers for wood and as a plasticizer of epoxy acrylated oligomer. veja menos | |
| Polimer 4007 | Polidur San Luis | Polimer 4007 is 100% acrylated amine with excellent curing speed and medium gloss. It Increases ink´s curing speed and Increases adhesion in plastics and glass. Polimer 4007 is for use in plastics lacquers and varnishes, inks and varnishes with excellent ...veja mais Polimer 4007 is 100% acrylated amine with excellent curing speed and medium gloss. It Increases ink´s curing speed and Increases adhesion in plastics and glass. Polimer 4007 is for use in plastics lacquers and varnishes, inks and varnishes with excellent adhesion in different substrates and varnishes and lacquers for wood. veja menos | |
| Polimer 4008 | Polidur San Luis | Polimer 4008 is epoxy acrylated at 80% in TMPTA. This product presents excellent curing speed, is a versatile oligomer for different applications and high film hardness and gloss. It is for use in varnishes and pigmented paints for wood, inks and varnishe...veja mais Polimer 4008 is epoxy acrylated at 80% in TMPTA. This product presents excellent curing speed, is a versatile oligomer for different applications and high film hardness and gloss. It is for use in varnishes and pigmented paints for wood, inks and varnishes for plastics, paper and glass and varnishes and lacquers resistance to risk. veja menos | |
| Polimer 6000 | Polidur San Luis | Polimer 6000 is an acrylic acrylated at 40% in Policure 5013. This product presents good curing speed, medium film hardness, medium gloss and excellent adhesion in plastics. It is for use in plastics lacquers and varnishes, inks and varnishes with excelle...veja mais Polimer 6000 is an acrylic acrylated at 40% in Policure 5013. This product presents good curing speed, medium film hardness, medium gloss and excellent adhesion in plastics. It is for use in plastics lacquers and varnishes, inks and varnishes with excellent adhesion in different substrates and Varnishes and lacquers for wood. veja menos | |
| Polisat 620-80 X | Polidur San Luis | Polisat 620-80 X is a saturated polyester resin at 80 % solids in xylene. This product has excellent solubility in a wide range of solventes and excellent compatibility with most solvent based resins. It is for use as a binder for solvent based pigment pa...veja mais Polisat 620-80 X is a saturated polyester resin at 80 % solids in xylene. This product has excellent solubility in a wide range of solventes and excellent compatibility with most solvent based resins. It is for use as a binder for solvent based pigment pastes. veja menos | |
| Polisat 714-70 HF | Polidur San Luis | Polisat 714-70 HF is a saturated poliester resin at 70% in high flash. This product offers excellent weather and yellowing resistance and very good reactivity in short bake cycles. Polisat 714-70 HF is for use in coil and can coating enamels and high sol...veja mais Polisat 714-70 HF is a saturated poliester resin at 70% in high flash. This product offers excellent weather and yellowing resistance and very good reactivity in short bake cycles. Polisat 714-70 HF is for use in coil and can coating enamels and high solids stoving enamels. veja menos | |
| Polisat 738-65 X | Polidur San Luis | Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane prime...veja mais Polisat 738-65 X is a modified saturated polyester resin at 65 % in xilol. This product offers low crosslinking relation with polyurethan resins, fast dry as primers for metal and it is easy to matt. It has applications in two component polyurethane primers and lacquers for wood and metal of low crosslinking, two component polyurethane matt and low gloss lacquers and cellulose nitrate plasticizer. veja menos | |
| Polisat 768-80 AB | Polidur San Luis | Polisat 768-80 AB is a saturated polyester resin at 80 % solids in butyl acetate. This product provide excellent elasticity and yellow resistance even at elevated temperatures and it has high compatibility with hydroxylated acrylic resins. It is for use i...veja mais Polisat 768-80 AB is a saturated polyester resin at 80 % solids in butyl acetate. This product provide excellent elasticity and yellow resistance even at elevated temperatures and it has high compatibility with hydroxylated acrylic resins. It is for use in 2 K PU laquers, lacquers for plastics and leather, overprinting varnishes and is an elasticity modifier of acrylic resins. veja menos | |
| Polistand 920-60 A | Polidur San Luis | Polistand 920-60 A is a binder for aluminium enamels at 60% solids in white spirit. This product has excellent leafing, very good mirroring effect, and good tack free times and final hardening. Uses include decorative enamels with aluminium pastes. | |
| Poliuret 750-60 XD | Polidur San Luis | Poliuret 750-60 XD is one component of aromatic polyurethane at 60% in xilol-PMA. This product presents Fast dry to dust and hard excellent gloss and excellent abrasion resistance. It has applications as a plasticizer for wood floors, a component of polyu...veja mais Poliuret 750-60 XD is one component of aromatic polyurethane at 60% in xilol-PMA. This product presents Fast dry to dust and hard excellent gloss and excellent abrasion resistance. It has applications as a plasticizer for wood floors, a component of polyurethane lacquers for wood, metal lacquers and concrete floors sealers. veja menos | |
| Poliuret 778-75 AE | Polidur San Luis | Poliuret 778-75 AE is a non-reactive aromatic polyurethane at 75% in ethyl acetate. It presents a fast hard dry to dust, good flexibility, fast solvent release and excellent compatibility with nitrocellulose resins. It has applications in nitrocellulose p...veja mais Poliuret 778-75 AE is a non-reactive aromatic polyurethane at 75% in ethyl acetate. It presents a fast hard dry to dust, good flexibility, fast solvent release and excellent compatibility with nitrocellulose resins. It has applications in nitrocellulose plasticizer por laminating inks and adhesives, front and laminating inks and inks for application on rubber and plastics. veja menos | |
| Polyamide Resin PA-108 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-108 is a benzene-soluble stable polyamide resin. It has good solvent release, excellent glossiness, strong adhesive power, and fine gel resistance. This product is well suited for use in gravure printing ink, paper and thin film printin...veja mais Polyamide Resin PA-108 is a benzene-soluble stable polyamide resin. It has good solvent release, excellent glossiness, strong adhesive power, and fine gel resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. veja menos | |
| Polyamide Resin PA-188 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-188 is a benzene-soluble polyamide resin. It has good solvent release, good adhesive power, and good freezing resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing v...veja mais Polyamide Resin PA-188 is a benzene-soluble polyamide resin. It has good solvent release, good adhesive power, and good freezing resistance. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. veja menos | |
| Polyamide Resin PA-308 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-308 is a benzene-soluble polyamide resin. It has good heat resistance, strong adhesive power, fine glossiness, anti-friction, and anti-scratch. This product is well suited for use in heat-resistance printing ink, paper and thin film pri...veja mais Polyamide Resin PA-308 is a benzene-soluble polyamide resin. It has good heat resistance, strong adhesive power, fine glossiness, anti-friction, and anti-scratch. This product is well suited for use in heat-resistance printing ink, paper and thin film printing ink, over-printing varnish, and over-printing ink. veja menos | |
| Polyamide Resin PA-388 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-388 is a benzene-soluble polyamide resin. It has good transparency, strong adhesive power, outstanding glossiness, and good pigment wettability. This product is well suited for use in gravure printing ink, paper and thin film printing i...veja mais Polyamide Resin PA-388 is a benzene-soluble polyamide resin. It has good transparency, strong adhesive power, outstanding glossiness, and good pigment wettability. This product is well suited for use in gravure printing ink, paper and thin film printing ink, and over-printing varnish. veja menos | |
| Polyamide Resin PA-508 | Ningbo Briscent Trade Co., Ltd. | Polyamide Resin PA-508 is a alcohol-soluble polyamide resin. It has good solvent release and strong adhesive power. This product is well suited for use in gravure printing ink, flexo printing ink, and over-printing varnish. | |
| Polyamide Resin TK 1014 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 1014 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-140 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1014 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 1417 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 1417 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 140-170 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1417 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 1720 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 1720 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 170-200 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 1720 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 2000 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 2000 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 120-170 mpa.s at 25°C, and has a softening point of 115-125°C. Polyamide Resin TK 2000 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 588B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 588B is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-180 mpa.s at 25°C, and has a softening point of 105-115°C. Polyamide Resin TK 588B finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 588C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 588C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 100-180°C. Polyamide Resin TK 588C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 688B | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freez...veja mais Polyamide Resin TK 688B is a yellowish granule produced from reacted dimer acid and diamine that functions as a co-solvent polyamide resin. This product is compatible with nitrocotton, adheres to polyethylene material, and features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 110-180 mpa.s at 25°C, and has a softening point of 120-200°C. Polyamide Resin TK 688B finds application in gravure plastics, printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 688C | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 688C is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 100-150 mpa.s at 25°C, and has a softening point of 120-180°C. Polyamide Resin TK 688C finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polyamide Resin TK 7010 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a visc...veja mais Polyamide Resin TK 7010 is a yellowish granule reacted from dimer acid and diamine that functions as a co-solvent polyamide resin. This product features high gloss, a low freezing point, solvent release, and folding endurance. It is water-fast, has a viscosity of 70-100 mpa.s at 25°C, and has a softening point of 105-118°C. Polyamide Resin TK 7010 finds application in gravure plastic printing inks, paper printing inks, and hot-melt adhesives. veja menos | |
| Polydo DP-1000 | Kukdo Chemical Co., Ltd. | Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. ...veja mais Polydo DP-1000 polyether polyol is 1000 molecular weight polyether diol. It is useful for pre-polymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. veja menos | |
| Polydo DP-2000 | Kukdo Chemical Co., Ltd. | Polydo DP-2000 polyether polyol is 2000 molecular weight polyether diol. It is generally used for soft flexible foam which is suitable to garment materials. It is blended with another polyols such as Polydo GY-3000 or GY-3000E to improve the property. | |
| Polydo DP-3000 | Kukdo Chemical Co., Ltd. | Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...veja mais Polydo DP-3000 polyether polyol is 3000 molecular weight polyether diol based on propylene oxide. DP-3000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. veja menos | |
| Polydo DP-400 | Kukdo Chemical Co., Ltd. | Polydo DP-400 polyether polyol is 400 molecular weight polyether diol. It is applied to a variety of applications. DP-400 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. | |
| Polydo DP-4000 | Kukdo Chemical Co., Ltd. | Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications,...veja mais Polydo DP-4000 polyether polyol is 4000 molecular weight polyether diol based on propylene oxide. DP-4000 is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. veja menos | |
| Polydo DP-4000E | Kukdo Chemical Co., Ltd. | Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast e...veja mais Polydo DP-4000E polyether polyol is 4000 molecular weight polypropylene glycol. DP-4000E is compatible with most polyether polyols and can be blended with other diols or triols. It is generally used in polyurethane and other applications, including cast elastomer, sealants, defoamers, lubricants, crude oil, and plasticizers. veja menos | |
| Polydo DP-750 | Kukdo Chemical Co., Ltd. | Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It ...veja mais Polydo DP-750 polyether polyol is 750 molecular weight polyether diol. It is useful for prepolymer production and chain extender in elastomer formulations. Polydo DP-1000 is colorless liquid glycol exhibiting good compatibility with organic chemicals. It has good solubility in water. veja menos | |
| Polydo ED-500 | Kukdo Chemical Co., Ltd. | Polydo ED-500 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| Polydo ED-750 | Kukdo Chemical Co., Ltd. | Polydo ED-750 is a nitrogen-containing polyol used as cross-linking agent for rigid or semi-rigid foam production. It is generally formulated with triol and tetraol to exhibit excellent dimensional stability, compressive strength and less shrinkage. | |
| Polydo GY-1000 | Kukdo Chemical Co., Ltd. | Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended w...veja mais Polydo GY-1000 polyether polyol is a glycerine initiated, nominal 1000-molecular -weight triol based on propylene oxide. GY-1000 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. veja menos | |
| Polydo GY-250 | Kukdo Chemical Co., Ltd. | Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...veja mais Polydo GY-250 polyether polyol is a glycerine initiated, nominal 250-molecular -weight triol based on propylene oxide. GY-250 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. veja menos | |
| Polydo GY-3000 | Kukdo Chemical Co., Ltd. | Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...veja mais Polydo GY-3000 polyether polyol is a glycerine initiated, nominal 3,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. veja menos | |
| Polydo GY-3000E | Kukdo Chemical Co., Ltd. | Polydo GY-3000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 3,000. It is generally used for the production of polyurethane foams and elastomers. | |
| Polydo GY-3010E | Kukdo Chemical Co., Ltd. | Polydo GY-3010E polyether polyol is a glycerine initiated, nominal 3,000 molecular weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams. | |
| Polydo GY-3300E | Kukdo Chemical Co., Ltd. | Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell...veja mais Polydo GY-3300E polyether polyol is a glycerine initiated, nominal 3,300-molecular -weight triol based on propylene oxide and ethylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams and cell-opener for high resilient flexible foam and cold molded flexible foam. veja menos | |
| Polydo GY-3500 | Kukdo Chemical Co., Ltd. | Polydo GY-3500 polyether polyol is a glycerine initiated, nominal 3,500 molecular weight triol based on propylene oxide. This polyol is used extensively in the production of conventional flexible polyurethane slab-stock foams. | |
| Polydo GY-4000 | Kukdo Chemical Co., Ltd. | Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applica...veja mais Polydo GY-4000 polyether polyol is a glycerine initiated, nominal 4,000-molecular -weight triol based on propylene oxide. The polyol is capable of producing of flexible slab-stock polyurethane foams for automotive, furniture, packaging and bedding applications. veja menos | |
| Polydo GY-420 | Kukdo Chemical Co., Ltd. | Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing ...veja mais Polydo GY-420 polyether polyol is a glycerine initiated, nominal 420-molecular -weight triol based on propylene oxide. GY-420 is generally used for high density rigid polyurethane foams. The foams over 400kg/ density are used for construction and housing materials. Foam density can be varied with formulation. veja menos | |
| Polydo GY-5000E | Kukdo Chemical Co., Ltd. | Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...veja mais Polydo GY-5000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. veja menos | |
| Polydo GY-5100 | Kukdo Chemical Co., Ltd. | Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot...veja mais Polydo GY-5100 polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 5,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. veja menos | |
| Polydo GY-6000E | Kukdo Chemical Co., Ltd. | Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-sho...veja mais Polydo GY-6000E polyether polyol is a primary hydroxyl terminated triol with a molecular weight of 6,000. It is generally used for high resilient flexible foam and cold molded flexible foam. The performed foam has good tensile and tear strength by one-shot process. veja menos | |
| Polydo GY-600E | Kukdo Chemical Co., Ltd. | Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most p...veja mais Polydo GY-600E polyether polyol is a glycerine initiated, nominal 600-molecular -weight triol based on propylene oxide and ethylene oxide. GY-600E is generally used for the production of rigid polyurethane foams and adhesives. It is compatible with most polyether polyols and can be blended with other diols or triols. veja menos | |
| Polydo GY-700 | Kukdo Chemical Co., Ltd. | Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with...veja mais Polydo GY-700 polyether polyol is a glycerine initiated, nominal 700-molecular -weight triol based on propylene oxide. GY-700 is generally used for high density rigid polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. veja menos | |
| Polydo GY-750P | Kukdo Chemical Co., Ltd. | Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with ot...veja mais Polydo GY-750P polyether polyol is a glycerine initiated, nominal 750-molecular -weight triol based on propylene oxide. GY-750P is generally used for slow recovery polyurethane foams. It is compatible with most polyether polyols and can be blended with other diols or triols. veja menos | |
| Polydo PN-400 | Kukdo Chemical Co., Ltd. | Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...veja mais Polydo PN-400 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. veja menos | |
| Polydo PN-560 | Kukdo Chemical Co., Ltd. | Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transpor...veja mais Polydo PN-560 polyether polyol is pentaerythritol-initiated polyol designed for rigid polyurethane foams. Because of its low viscosity and stable hardness, this polyol has found wide application in rigid foams. It can be applied to refrigeration, transportation and construction applications. veja menos | |
| Polydo SC-357 | Kukdo Chemical Co., Ltd. | Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...veja mais Polydo SC-357 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. veja menos | |
| Polydo SC-381 | Kukdo Chemical Co., Ltd. | Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the ...veja mais Polydo SC-381 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. veja menos | |
| Polydo SC-400 | Kukdo Chemical Co., Ltd. | Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the p...veja mais Polydo SC-400 polyether polyol is sucrose / glycerine initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systemsor in the preparation pre-polymer process. veja menos | |
| Polydo SC-450 | Kukdo Chemical Co., Ltd. | Polydo SC-450 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the pre-polymer process. | |
| Polydo SC-4508 | Kukdo Chemical Co., Ltd. | Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or i...veja mais Polydo SC-4508 polyether polyol is sucrose/ ethylene glycol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. veja menos | |
| Polydo SC-455 | Kukdo Chemical Co., Ltd. | Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer pro...veja mais Polydo SC-455 is sucrose/glycerine initiated polyether polyol designed for rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one-shot systems or in the preparation pre-polymer process. veja menos | |
| Polydo SC-490 | Kukdo Chemical Co., Ltd. | Polydo SC-490 is sucrose/glycerine initiated polyether polyol. It is used for rigid foam which has excellent dimensional stability and mechanical property. Rigid foam can be produced both by one-shot systems and by the prepolymer process. | |
| Polydo ST-480 | Kukdo Chemical Co., Ltd. | Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...veja mais Polydo ST-480 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation prepolymer process. veja menos | |
| Polydo ST-481 | Kukdo Chemical Co., Ltd. | Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparatio...veja mais Polydo ST-481 polyether polyol is sorbitol initiated polyol designed for the production of rigid polyurethane foam. It shows good workability because of its low viscosity. It can be used either as polyol reactants in one -shot systems or in the preparation pre-polymer process. veja menos | |
| Polydo TD-400 | Kukdo Chemical Co., Ltd. | Polydo TD-400 polyether polyol is a highly reactive aromatic amine(o-TDA)-initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applie...veja mais Polydo TD-400 polyether polyol is a highly reactive aromatic amine(o-TDA)-initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, trans- portation and construction applications. veja menos | |
| Polydo TD-405 | Kukdo Chemical Co., Ltd. | Polydo TD-405 polyether polyol is a highly reactive aromatic amine(o-TDA) initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applie...veja mais Polydo TD-405 polyether polyol is a highly reactive aromatic amine(o-TDA) initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, trans- portation and construction applications. veja menos | |
| Polydo TE-360 | Kukdo Chemical Co., Ltd. | Polydo TE-360 polyether polyol is a highly reactive amine initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration,...veja mais Polydo TE-360 polyether polyol is a highly reactive amine initiated polyol designed for rigid polyurethane foams. Because of its low conductivity and low flammability, this polyol has found wide application in rigid foams. It can be applied refrigeration, transportation and construction applications. veja menos | |
| Polymer ST 80 | Evonik Operations GmbH, BL Silanes | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| Polymer ST 80 | Evonik Operations GmbH, BL Interface & Performance | Polymer ST 80 is a high quality binder for adhesive formulations where high bonding strength and high surface hardness after curing are required. | |
| POLYVEST® 110 | Evonik Operations GmbH, BL Coating & Adhesive Resins | Aplicação: compostos de vedação e adesivos, tintas anticorrosão, impregnação de juntas de cabeçote, impregnação de substratos minerais, modificações de resina, misturas de borracha. Forma de fornecimento: líquido viscoso, > 99.8% de não voláteis. | Request Sample |
| POLYVEST® 130 | Evonik Operations GmbH, BL Coating & Adhesive Resins | Aplicação: como plastificante em aplicações de borracha, como agente liberador de bolor para espumas de poliuretano, para a modificação de resinas, para melhorar as propriedades de secagem a ar de óleos vegetais, como aglutinante único para revestimentos ...veja mais Aplicação: como plastificante em aplicações de borracha, como agente liberador de bolor para espumas de poliuretano, para a modificação de resinas, para melhorar as propriedades de secagem a ar de óleos vegetais, como aglutinante único para revestimentos de superfície de uma demão para uso interior (por exemplo, tintas de máquina), como aglutinante para borracha reciclada. Forma de fornecimento: líquido viscoso, > 99,8% de não voláteis. veja menos | Request Sample |
| POLYVEST® eCO 110 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...veja mais POLYVEST® eCO 110 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 110 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 110 Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO 110 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and others, and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 110 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizer for rubber compounds, binder for recycled rubber compounds, electrical insulations and potting compounds, release agents for polyurethane foams, a modifier of vegetable oils, binder for oxidative drying alkyd resins, binder for dusty and dry quartz sand, binder for soil stabilization, and many more. veja menos | Request Sample |
| POLYVEST® eCO 130 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification...veja mais POLYVEST® eCO 130 Bio is a stereospecific, low viscous, and unsaponifiable liquid polybutadiene with a high content of 1,4-cis double bonds. POLYVEST® eCO 130 Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO 130 Bio brings the same well-known performance but has reduced carbon emissions. The apolar, hydrophobic hydrocarbon resin POLYVEST® eCO 130 Bio is a highly reactive binder characterized by: high chemical resistance, high water resistance, high electrical insulation properties, high cold resistance, good solubility in aliphatic, aromatics, and ethers and good compatibility with hydrocarbon resins, rosin resins and zinc resonate. POLYVEST® eCO 130 Bio is used in adhesive and sealant compositions, polymer printing plates, plasticizers for rubber compounds, binders for recycled rubber compounds, release agents for polyurethane foams, cell openers for polyurethane foams, defoamers, modifiers of resin systems, a modifier of vegetable oils, binder for dusty and dry quartz sand, and many more. veja menos | Request Sample |
| POLYVEST® eCO EP MA 100 Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and acce...veja mais POLYVEST® eCO EP MA 100 Bio is a maleic anhydride adduct of a low molecular weight 1,4-cis polybutadiene which has succinic anhydride groups randomly distributed along the polymer chains. This makes the originally apolar polybutadiene more polar and accessible for various chemical reactions. POLYVEST® eCO EP MA 100 Bio is compliant with the sustainability criteria laid down by the ISCC, a voluntary certification and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO EP MA 100 Bio brings the same well-known performance but has reduced carbon emissions. veja menos | Request Sample |
| POLYVEST® eCO HT Bio | Evonik Operations GmbH, BL Coating & Adhesive Resins | POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a ...veja mais POLYVEST® eCO HT Bio is a stereospecific, low viscous, and hydroxyl-terminated liquid polybutadiene. Due to its unsaturated polymer backbone and the terminal hydroxyl functionalities, the apolar and hydrophobic hydrocarbon resin POLYVEST® eCO HT Bio is a highly reactive binder providing versatile opportunities for precise chemical modifications and reactions. POLYVEST® eCO HT Bio is compliant with the sustainability criteria laid down by the ISCC, voluntary certification, and a trusted standard. It does not differ in its physicochemical properties compared to the standard grade derived from fossil-based raw materials. Therefore, it can be used as a drop-in replacement by customers because it does not require any additional tests, requalification, or investment. POLYVEST® eCO HT Bio brings the same well-known performance but has reduced carbon emissions. POLYVEST® eCO HT Bio exhibits the following features: high chemical resistance towards acids and bases, excellent water resistance, excellent electrical insulation properties, high cold resistance by keeping good flexibility at low temperatures, good solubility in aliphatics, aromatics, and ethers, low moisture and gas permeability, good adhesion to various substrates. POLYVEST® eCO HT Bio is used in adhesive and sealant compositions, insulated glass sealants, waterproofing membranes and coatings, gap fillers and expansion joints, electrical insulations and potting compounds, binder for rubber-based sealants and recycled rubber compounds, polymer modification, and many more. veja menos | Request Sample |
