| 4962-M-75 Rosin Modified Epoxy Ester Resin | Gabriel Performance Products | 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasi...veja mais 4962-M-75 Rosin Modified Epoxy Ester Resin is an economical high solids epoxy ester vehicle. This product offers excellent adhesion to most surfaces and dries to a hard, flexible finish. Finishes made with this vehicle usually offer good alkali and abrasion resistance. Uses include trade sale and industrial primers/sealers, block fillers, floor finishes, and direct to metal maintenance finishes. veja menos | |
| Abiester 90 | Spolchemie | Abiester 90 is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and glycerin. Abiester 90 is primarily used for coatings, hot melt adhesives and is also used in printing inks. | |
| Abifen 125 D | Spolchemie | Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rub...veja mais Abifen 125 D is a transparent yellow-brown solvent-free colophony ester binder for coatings and adhesives. This product is made from rosin resin and phenol-formaldehyde. Abifen 125 D is primarily used for coatings, adhesives and it also can be used in rubber mixtures. veja menos | |
| Abimal 125 | Spolchemie | Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It al...veja mais Abimal 125 is a transparent yellow-brown non solvent ester binder for coatings and adhesives. This product is a mixture of rosin resin and maleic anhydride. Abimal 125 is primarily used for modifying alkyd and nitrocellulose coatings, printing inks. It also provides weather resistance and gloss finish. veja menos | |
| AMBERYL 1098 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin, and corresponds to penta modified rosin. Recommended for the formulation of adhesives and can be used also in oil resin varnishes and paints. | |
| AMBERYL 800 | Polimeros Sinteticos, S.A de C.V | Used for its excellent hardness and gloss, is recommended primarily for the preparation of solvent-based inks. | |
| AMBERYL 830 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in flexographic inks and rotogravure, also making it soluble in alkaline water for use in flexographic inks based formulas...veja mais A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of solvent-based inks for use in flexographic inks and rotogravure, also making it soluble in alkaline water for use in flexographic inks based formulas for water. veja menos | |
| AMBERYL 840 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Recommended for the formulation of inks and lacquers. | |
| AMBERYL 875 | Polimeros Sinteticos, S.A de C.V | A partially esterified colophony resin and modified with fumaric acid. Mainly recommended for the formulation of flexographic inks in alcohol, acetate or mixture thereof in water or as an additive in nitrocellulose lacquers. | |
| AMBERYL 880 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin, and corresponds to a partially esterified fumaric adduct. Mainly recommended for the formulation of inks flexo alcohol, acetates or mixtures thereof or water and gravure inks. | |
| AMBERYL GR 740 | Polimeros Sinteticos, S.A de C.V | The ester of glycerin rosin (pitch). Mainly recommended for the formulation of adhesives, may be employed in coatings and compounds that require a medium-hard thermoplastic resin. | |
| AMBERYL GR-720 | Polimeros Sinteticos, S.A de C.V | Fabricated from a resin pitch esterified with polyalcohols. Is characterized by being thermoplastic and having lower acidity and higher melting point than the pitch which it is derived. The Gum Resin has particularly attractive properties for the preparat...veja mais Fabricated from a resin pitch esterified with polyalcohols. Is characterized by being thermoplastic and having lower acidity and higher melting point than the pitch which it is derived. The Gum Resin has particularly attractive properties for the preparation of chewing gum. Other applications can be found in the manufacture of paints, printing inks, wood finishes, rubber products, solvent-based adhesives and hot melt. veja menos | |
| AMBERYL M-15 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor a...veja mais Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with glycerol. Recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene), as a film-forming resin in printing inks and as a component for some varnishes or alkyd paints. veja menos | |
| AMBERYL M-15B | Polimeros Sinteticos, S.A de C.V | Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the form...veja mais Rosin-based manufactures (pitch) and corresponds to an adduct maleic esterified with glycerol. Specially formulated to have good compatibility with nitrocellulose dissolved in high proportion or concentration of acetone. Is mainly recommended for the formulation of coatings and sealants for wood cut nitrocellulose in acetone or where they are used primarily polar solvents (with minor amounts of toluene). veja menos | |
| AMBERYL M-38 | Polimeros Sinteticos, S.A de C.V | Corresponds to the modified rosin ester of phenol, which presents a clear amber color, high gloss, viscosity and solubility provides average mineral oils for use in varnishes for printing. For the features it presents, is recommended for inks, varnishes f...veja mais Corresponds to the modified rosin ester of phenol, which presents a clear amber color, high gloss, viscosity and solubility provides average mineral oils for use in varnishes for printing. For the features it presents, is recommended for inks, varnishes for printing and offset systems, as well as resin modifier QUICK - HEAT SET and SET. veja menos | |
| AMBERYL M6 | Polimeros Sinteticos, S.A de C.V | Corresponds to the pitch maleic esterified with glycerol, with the relevant characteristic brightness and that impart hardness to the lacquers and varnishes where they are included. Can be used as a modifier of nitrocellulose lacquers, enamels, printing i...veja mais Corresponds to the pitch maleic esterified with glycerol, with the relevant characteristic brightness and that impart hardness to the lacquers and varnishes where they are included. Can be used as a modifier of nitrocellulose lacquers, enamels, printing inks resinous cheer and "off-set", varnishes for printing, solvent based adhesives and hot melt, sealants, wood finishes and generally in those applications where thermoplastic resins are required for good stability and low color. veja menos | |
| AMBERYL M6-60T | Polimeros Sinteticos, S.A de C.V | Imparts gloss and hardness, lacquers and varnishes where it is used. Soluble in aromatic hydrocarbons, terpenes and ketones in partially in alcohols, aliphatic hydrocarbon resins compatible with and non-drying alkyd drying with gum ester, nitrocellulose, ...veja mais Imparts gloss and hardness, lacquers and varnishes where it is used. Soluble in aromatic hydrocarbons, terpenes and ketones in partially in alcohols, aliphatic hydrocarbon resins compatible with and non-drying alkyd drying with gum ester, nitrocellulose, cellulose acetate butyrate and limited heavy oils. veja menos | |
| AMBERYL MP-25 | Polimeros Sinteticos, S.A de C.V | Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives o...veja mais Manufactured based on rosin (pitch) and corresponds to an adduct maleic esterified with pentaerythritol. Soluble in aliphatic solvents, aromatic alcohols and ketones insoluble in water and. Compatible with alkyd resins, drying oils and other derivatives of rosin. Is recommended primarily for the formulation of coatings for lithography and as an additive modifier of hardness and drying. veja menos | |
| BREDEX 100 | Polimeros Sinteticos, S.A de C.V | Obtained by the catalytic treatment of Brea, changing the arrangement of double bonds in their molecular structure of the resin acids. Provides optimal properties of emulsifier in the polymerization of styrene-butadiene synthetic rubber. | |
| BREFOR 80 | Polimeros Sinteticos, S.A de C.V | Obtained by catalytic treatment of Brea, changing the arrangement of double bonds in their molecular structure and saponifying rosin acids to form the potassium soap of these fluids. Provides optimal properties of emulsifier in the polymerization of styre...veja mais Obtained by catalytic treatment of Brea, changing the arrangement of double bonds in their molecular structure and saponifying rosin acids to form the potassium soap of these fluids. Provides optimal properties of emulsifier in the polymerization of styrene-butadiene synthetic rubber. veja menos | |
| Burez® K80 500D | Lawter | Burez® K80 500D is a rosin soap with 80% solids and functions as an emulsifier in emulsion systems, as a tackifier for bottle label adhesives and applications in pigment resination. The Burez® range of rosin soaps are based on modified and disproportionat...veja mais Burez® K80 500D is a rosin soap with 80% solids and functions as an emulsifier in emulsion systems, as a tackifier for bottle label adhesives and applications in pigment resination. The Burez® range of rosin soaps are based on modified and disproportionated rosins saponified with potassium hydroxide or sodium. It is designed mostly for emulsion polymerization, wet glue formulations and organic pigment production. veja menos | |
| Disvipol-203 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-203 is a rosin derivative. This product has been modified with phenolic compounds. It can be used in anticorrosive paints, marine finishes, sealants, primers, insulating varnishes, and oil varnishes. | |
| Disvipol-252 | D.S.V. Chemicals Pvt. Ltd. | Disvipol-252 is a phenolic resin. This product has high purity, is oil-resistant, and is compatible with neoprene rubber solutions. It can be used in flexogravure inks, spirit varnishes, traffic paints, and adhesives. | |
| Estergum-751 | D.S.V. Chemicals Pvt. Ltd. | Estergum-751 is an esterified rosin derivative. This product derives from penta polyols. It can be used in primers, undercoats, adhesives, and nitrocellulose lacquers. | |
| Estergum-752 | D.S.V. Chemicals Pvt. Ltd. | Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhes...veja mais Estergum-752 is an esterified rosin derivative. This product derives from glycerine polyols. It can be used in adhesives and wax systems in hot melt adhesives. Estergum-752 is compatible with vinyl copolymers that are used in synthetic floor tile adhesives. veja menos | |
| Flytac 102-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...veja mais Flytac 102-100 is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR. This product has a colour gardener (in 50% Toluene) of 4 max., an acid value of 20mg KOH/g max., and a softening point (R&B) of 97-100℃. veja menos | |
| FLYTAC 103-85 | Guangzhou Flying Dragon Chemical Ltd. | A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS,...veja mais A slight yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol, it has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. veja menos | |
| Flytac 103-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for thi...veja mais Flytac 103-E is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Uses for this product include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It an also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. Flytac 103-E has a softening point (R&B) of 82-90°C min., an acid value of 3-8mg KOH/g max., and a colour gardener (in 50% Toluene) of 8 max. veja menos | |
| Flytac 105-L | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In...veja mais Flytac105-L is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, waterborne adhesives, non-wovens, packaging, tapes and labels, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. Flytac105-L has a softening point (R&B) of 85°C, an acid value of 9mg KOH/g max., and an ash content of 0.2% max. veja menos | |
| Flytac 106-100 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesiv...veja mais Flytac 106-100 is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. Flytac 106-100 has a color gardener of 8~10, a specific gravity (25°C/25°C) of 1.060~1.090, and a softening point (R&B) of 95-102°C min. veja menos | |
| Flytac 106-100L | Guangzhou Flying Dragon Chemical Ltd. | Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesi...veja mais Flytac 106-100L is a medium hard, pale, thermoplastic resin designed primarily as a tackifying resin for various types of polymer- and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. This product has a color gardener of 4~6, a softening point (R&B) of 95-102°C, and a specific gravity (25°C/25°C) of 1.060~1.090. veja menos | |
| Flytac 107 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important com...veja mais Flytac 107 is made of derivatives of gum rosin obtained by chemical treatment to reduce the Abietic Acid content. It is used as a tackifier for pressure sensitive adhesive, in the manufacture of SBR and other synthetic rubbers, as well as in important component for making potassium soaps. This product has a dehydrated acid content of 52.0% min., an unsaponifiable material of 10.0% max., and an abietic acid of 1% max. veja menos | |
| Flytac 111-101 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...veja mais Flytac 111-101 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-101 has a tetrahydro resin acid of 10.0% min., an abietic acid of 2.0% max., and a dehydroabietic acid of 10.0% max. veja menos | |
| Flytac 111-301 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly st...veja mais Flytac 111-301 is refined from High-Hydrogenated rosin that is eliminated foreign matter and the coloring radical. It is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree. It is one of the palest, most highly stabilized rosins commercially available, and is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties. Flytac 111-301 has an abietic acid of 0-0.1% max., a softening point (R&B) of 78°C, and a tetrahydro resin acid level of 30.0-40.0%. veja menos | |
| Flytac 115 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives pr...veja mais Flytac 115 is a specially designed highly stable 50% water-borne polymeric type tackifier dispersion with 23 degree (rolling & ball) softening point. It is a highly stabilized rosin ester dispersion designed to provide superior performance in adhesives properties, and is compatible with anionic & nonionic types of latexes. It adheres to a wide range of substrates. This product has a viscosity ((Brookifield 2#, 60rpm, 25°C,cps) PH(25°C)) of 150 max, a particle size (AVG) of 0.25μm, and a density (25°C) of 1.02g/ml. veja menos | |
| Flytac 116-110 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg K...veja mais Flytac 116-110 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is deal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 190 ± 10mg KOH/g, a softening point (R&B) of 110± 5°C, and a color gardner (50% Benzene solution) of 5 max. veja menos | |
| Flytac 116-130 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180...veja mais Flytac 116-130 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideally used for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 180 ± 10mg KOH/g, a softening point (R&B) of 130 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. veja menos | |
| Flytac 116-150 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg ...veja mais Flytac 116-150 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, and coatings. This product has an acid value of 170 ± 10mg KOH/g, a softening point (R&B) of 150 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. veja menos | |
| Flytac 116-160 | Guangzhou Flying Dragon Chemical Ltd. | Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg ...veja mais Flytac 116-160 is a rosin derivative modified by unsaturated acid and partially esterified with multi-alcohol. It is ideal for alcohol soluble intaglio printing inks, varnish and water-base inks, coatings etc. This product has an acid value of 200 ± 10mg KOH/g, a softening point (R&B) of 160 ± 5°C, and a color gardner (50% Benzene solution) of 8 max. veja menos | |
| FLYTAC 120-100W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...veja mais A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. veja menos | |
| FLYTAC 120-90W | Guangzhou Flying Dragon Chemical Ltd. | A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granu...veja mais A granular, water white modified gum rosin polyols esters made from special refined gum rosin by series advanced processes of partial hydrogenation, esterification and stabilization. Applications include ot melt adhesive for white EVA glue sticks or granules, SBS and SIS base hot melt and pressure sensitive adhesives, EVA based hot melt adhesives for quality of packing, booking and cigarettes adhesives, hot melt paints and sealants and water or solvent bases adhesives. veja menos | |
| Flytac102-100F | Guangzhou Flying Dragon Chemical Ltd. | Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Ty...veja mais Flytac102-100F is a slightly yellow transparent solid, which is made from Gum Rosin through esaterification with Pentaerythritol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, and excellent polymer compatibility. Typical uses include EVA base hot melt glue sticks, bookbindings, Pressure-sensitive adhesive based on SIS or SBS Adhesive, emulsion and paints based on NR and CR.This product has a melt viscosity (CPS at 150°C) of 850-1300, a softening point (R&B) of 97-103°C, and a specific gravity (25°C/25°C) of 1.060~1.090. veja menos | |
| Flytac103-90 | Guangzhou Flying Dragon Chemical Ltd. | Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses...veja mais Flytac103-90 is a slightly yellow transparent solid, which is made from Gum Rosin through esterification with Glycerol. It has the properties of high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility etc. Typical uses include EVA, SBS, SIS and other hot melt adhesives due to its stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings and other applications. This product has a colour gardener (in 50% Toleune) of 3 max., an acid value of 10mg KOH/g max., and a softening point (R&B) of 87-92°C min. veja menos | |
| Flytac105-E | Guangzhou Flying Dragon Chemical Ltd. | Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-ox...veja mais Flytac105-E is the glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot-melt, pressure-sensitive, and laminating adhesives, as well as in wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, highly tacky liquid resin. This product is ideally used for wax modification, waterborne adhesives, tapes and labels, solventborne adhesives, rubber and plastic modification, and paint and coatings. Flytac105-E has a softening point (R&B) of 78-88°C min., a specific gravity (25°C/25°C) of 1.060~1.090, and an ash content of 0.1% max. veja menos | |
| GLYCEROL ESTER OF GUM ROSIN 85 (PM-003) | PT. NASCO | GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture variou...veja mais GLYCEROL ESTER OF GUM ROSIN 85 is a pale thermoplastic resin made of gum rosin and glycerol / glycerine. It is perfectly soluble in various types of polymers. It exhibits excellent adhesiveness, as a result of which it is widely used to manufacture various adhesives, and primarily as a tackifier in hot melt adhesives (HMA). It has little odor and is light in color. veja menos | |
| GRANOLITE G | DRT (Les Derives Resiniques et Terpeniques) | This is a light-colored and deodorised gum rosin esterified with glycerol. | |
| GRANOLITE G 105 | DRT (Les Derives Resiniques et Terpeniques) | Gum rosin esterified with glycerol, GRANOLITE G 105 is a light-colored and deodorised resin suitable in various adhesive applications. | |
| GRANOLITE P 118 | DRT (Les Derives Resiniques et Terpeniques) | It is a pentaerythritol ester of rosin, showing a high softening point, mainly recommanded for Hot Melt formulations. | |
| GRANOLITE SG | DRT (Les Derives Resiniques et Terpeniques) | It is a glycerol ester of stabilized rosin, deodorized. | |
| Gum Rosin | LUKEM D.O.O. | Gum Rosin is a light yellow, transparent solid with a softening point of 76ºC. This product is used as a raw material in coatings and synthetic resins. | |
| GUM ROSIN INDONESIAN (PM-002) | PT. NASCO | GUM ROSIN INDONESIAN is made up of various resin acids such as Abietic, Palustric, Isopimaric, Mercusic Acids. | |
| HE100 | Tianyi Chemical Engineering Material Co., Ltd. | HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...veja mais HE100, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. veja menos | |
| HE105 | Tianyi Chemical Engineering Material Co., Ltd. | HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or S...veja mais HE105, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. veja menos | |
| HE85 | Tianyi Chemical Engineering Material Co., Ltd. | HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...veja mais HE85, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. veja menos | |
| HE90 | Tianyi Chemical Engineering Material Co., Ltd. | HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. Thi...veja mais HE90, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with glycerol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. veja menos | |
| HE95 | Tianyi Chemical Engineering Material Co., Ltd. | HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SB...veja mais HE95, in the form of a translucent crystalline flake, is a refined rosin modified resin esterified with pentaerythritol that can be used in EVA-based hot melt adhesives, solvent based adhesives, and pressure-sensitive adhesives that are based on SIS or SBS. This product resists aging, heat and oxidation. It is soluble in a wide range of solvents, such as aromatic or aliphatic hydrocarbon solvents, esters, or ketones. veja menos | |
| HT100 | Tianyi Chemical Engineering Material Co., Ltd. | HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...veja mais HT100, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. veja menos | |
| HT105 | Tianyi Chemical Engineering Material Co., Ltd. | HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...veja mais HT105, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. veja menos | |
| HT115 | Tianyi Chemical Engineering Material Co., Ltd. | HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This ...veja mais HT115, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. veja menos | |
| HT85 | Tianyi Chemical Engineering Material Co., Ltd. | HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...veja mais HT85, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. veja menos | |
| HT90 | Tianyi Chemical Engineering Material Co., Ltd. | HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product ...veja mais HT90, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with glycerol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. veja menos | |
| HT95 | Tianyi Chemical Engineering Material Co., Ltd. | HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This p...veja mais HT95, in the form of a translucent yellow crystalline flake, is a gum rosin that has been esterified with pentaerythritol, which can be used in EVA-based hot melt adhesives, bookbinding adhesives, pressure-sensitive adhesives, and emulsion paints. This product shows high viscosity and aging stability. It is soluble in aromatic and aliphatic hydrocarbon solvents, esters, and ketones, among others. veja menos | |
| MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 (PM-004) | PT. NASCO | MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity i...veja mais MALEIC MODIFIED GLYCEROL ESTER OF GUM ROSIN 130 is an oil soluble resin that is a glycerol ester of Gum Rosin modified using Maleic Anhydride. It is a hard thermoplastic resin that offers excellent solubility, good solvent evaporation, and low viscosity in solutions used in formulating Nitrocellulose based formulations. It exhibits good hardness, high gloss and vest fest drying speed. veja menos | |
| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...veja mais PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. veja menos | |
| Snowtack™ 765A | Lawter | Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfac...veja mais Snowtack™ 765A is a waterborne tackifier dispersant that aims to provide superior adhesive performance to various substrates. It is free of alkylphenol ethoxylate (APE) and has no solvents. The product helps to boost adhesion to high and low energy surfaces. It is mechanically stable, has good wash-off behavior and is suitable for use in waterborne adhesives in building and construction and automotive and paper industries. veja menos | |
| Snowtack® 775 A | Lawter | Snowtack® 775 A is a tackifier dispersion that gives a higher softening point of 76 oC acid-grade tackifier with a higher cohesive strength when formulated with acrylic and SBR PSA polymers. The Snowtack® resin series are water-based dispersions intended ...veja mais Snowtack® 775 A is a tackifier dispersion that gives a higher softening point of 76 oC acid-grade tackifier with a higher cohesive strength when formulated with acrylic and SBR PSA polymers. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. veja menos | |
| Snowtack® 780A | Lawter | Snowtack® 780A is a rosin ester with 50% solids content and is a general purpose ester grade tackifier to improve adhesive performance when formulated with acrylic and styrene-butadiene rubber and PSA polymers. The Snowtack® resin series are water-based d...veja mais Snowtack® 780A is a rosin ester with 50% solids content and is a general purpose ester grade tackifier to improve adhesive performance when formulated with acrylic and styrene-butadiene rubber and PSA polymers. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. veja menos | |
| Snowtack® 880G | Lawter | Snowtack® 880G is a rosin ester hybrid tackifier that is made to improve adhesion to apolar substrates with SBR PSA polymers and 2EHA acrylics. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emul...veja mais Snowtack® 880G is a rosin ester hybrid tackifier that is made to improve adhesion to apolar substrates with SBR PSA polymers and 2EHA acrylics. The Snowtack® resin series are water-based dispersions intended for adhesives based on natural rubber, SBR emulsions or acrylics. They can be used as adhesives in paper labeling and tapes as well as automotive and building construction industries. veja menos | |
| Snowtack™ SE724G | Lawter | Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard re...veja mais Snowtack™ SE724G is a solvent-free waterborne tackifier with a stabilized rosin ester component that brings superior adhesive performance to a variety of substrates. The product is free of alkylphenol ethoxylate (APE) and has the ability to soften hard resins, providing a smooth peel. It also improves adhesion to high and low energy surfaces and shows compatibility with acrylic and other polymers. It has good water resistance, is mechanically stable and has applications in waterborne, pressure-sensitive adhesives in various industries. veja menos | |
| Snowtack™ SE780G | Lawter | Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, impro...veja mais Snowtack™ SE780G is a waterborne tackifier from adducted rosin and a process of esterification. It is solvent-free with a resin ester component that brings superior adhesive performance to a variety of substrates. The product displays high cohesion, improves adhesion to high and low-energy substrates, has good mechanical stability and has applications in various waterborne adhesive systems. veja menos | |
| TURPENTINE OIL INDONESIA (PM-001) | PT. NASCO | TURPENTINE OIL INDONESIA is a colorless to pale yellow, liquid of Pinus merkusii (Sumatran Pine). |
