| BYK®-370 | BYK | BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethan...voir plus BYK®-370 is a reactive silicone surface additive that is a solution of a polyester modified hydroxy functional polydimethylsiloxane. This product reacts via its primary OH-groups with the binder and is preferably used in solvent-borne two-pack polyurethanes. It can also crosslink with the following binder systems: alkyd/melamine, polyester/melamine, acrylic/melamine, self-crosslinking acrylates, and epoxies. BYK-370 increases the surface slip. voir moins | Request Sample |
| CF1-3510 | NuSil Silicone Technology 1 | CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be us...voir plus CF1-3510 is a fluorosilicone potting and encapsulating elastomer that cures with the addition of heat. It is best used for applications that require solvent resistance and for molding parts such as stoppers, o-rings, and seals. This product can also be used as an encapsulating, potting and sealing material and it is best used in applications requiring an operating temperature range of -65°C to 240°C (-85°F to 465°F). voir moins | |
| CF1-3710-2 | NuSil Silicone Technology 1 | CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in s...voir plus CF1-3710-2 is a fluorosilicone foam that has a 1:1 ratio with a white Part A and gray Part B for easy identification and mixing. This product cures very quickly at room temperature to an elastomeric foam. It can be used as a solvent resistant seal or in shock and vibration dampening situations that require a flexible, light weight foam with exceptional radiation resistance and thermal insulation. This foam is especially useful where stability at higher and lower temperatures is required. voir moins | |
| CF1-3800 | NuSil Silicone Technology 1 | CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This pr...voir plus CF1-3800 is a thermally conductive, fluorosilicone elastomer that cures at room temperature, or rapidly with the addition of heat. It can be used to adhere covers on housings, modules, and other configurations that require a non-flowable material. This product can also be utilized as an adhesive, sealant or molding material when solvent resistance is needed. It can provide the transfer of heat between electrical components and heat sinks, and can operate at a temperature range of -65°C to 225°C (-85°F to 437°F). voir moins | |
| CF3-3521 | NuSil Silicone Technology 1 | CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a m...voir plus CF3-3521 is a fluorosilicone elastomer that can be used with with liquid injection molding equipment. It is an exceptional product to use for molding high quality parts such as gaskets, seals and o-rings. It is also ideal for applications that require a medium hardness silicone and solvent resistance. This product is best utilized in applications that require an operating temperature range of -65 to 240°C (-85 to 465°F). voir moins | |
| CF5-3521-2 | NuSil Silicone Technology 1 | CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive ...voir plus CF5-3521-2 is a two part, 50 mole % fluorosilicone that has a 1:1 Mix Ratio (Part A:B). It can be cured at room temperature, or more rapidly by heating it in an oven or with a heating lamp. The product is especially useful as a coating, sealant, adhesive or molding material in applications that require solvent resistance. voir moins | |
| POLYWAX™ 1000 | Univar Solutions | POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...voir plus POLYWAX™ 1000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. voir moins | Request Sample |
| POLYWAX™ 2000 | Univar Solutions | POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...voir plus POLYWAX™ 2000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. voir moins | Request Sample |
| POLYWAX™ 3000 | Univar Solutions | POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC rang...voir plus POLYWAX™ 3000 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. voir moins | Request Sample |
| POLYWAX™ 400 | Univar Solutions | POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...voir plus POLYWAX™ 400 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. voir moins | Request Sample |
| POLYWAX™ 500 | Univar Solutions | POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...voir plus POLYWAX™ 500 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. voir moins | Request Sample |
| POLYWAX™ 850 | Univar Solutions | POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC range...voir plus POLYWAX™ 850 is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt point, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. voir moins | Request Sample |
| POLYWAX™ EP-1100 Copolymer | Univar Solutions | POLYWAX™ EP-1100 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density...voir plus POLYWAX™ EP-1100 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. voir moins | Request Sample |
| POLYWAX™ EP-700 Copolymer | Univar Solutions | POLYWAX™ EP-700 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density ...voir plus POLYWAX™ EP-700 Copolymer is a fully saturated homopolymer of ethylene that exhibits a high degree of linearity and crystallinity. This synthetic wax has narrow molecular weight distributions with a typical polydispersity (Mw/Mn) of 1.08. Product density at 25ºC ranges from a low of 0.93 g/cc to a high of 0.98 g/cc. In application, POLYWAX polyethylenes exhibit sharp melt points, fast recrystallization, low melt viscosity, excellent heat stability, and resistance to chemical attack. voir moins | Request Sample |
| RENEWABLE ORIGIN Sebacic Acid Polyester Polyol PPS-10100 | Kowa American Corporation | RENEWABLE ORIGIN PPS-10100 is a sebacic acid polyester polyol primarily used in polyurethanes for stability, heat, solvent & chemical resistance, low temp characteristics and application color stability in coatings, adhesives & sealants, & inks. | Request Sample |
| SST®-5D (PTFE Micropowder) | Shamrock Technologies, Inc. | SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and ...voir plus SST®-5D is a low MW PTFE powder (white) with a particle size mean value of 5.0 µm. SST®-5D has a tightly controlled particle size distribution, resulting in fewer oversized particles. SST®-5D is recommended in all water-based, solvent-based, powder, and UV coating systems. voir moins |
