JONCRYL® 537 | BASF Dispersions & Resins | Joncryl® 537 is an acrylic emulsion for industrial coating applications. This translucent emulsion provides the fast dry characteristics of an emulsion, while providing the clarity and sandability necessary for applications such as interior wood sealers. | |
JONCRYL® 541 | BASF Dispersions & Resins | Joncryl® 541 is an acrylic emulsion for industrial coating applications that can be formulated at low VOC levels. | |
JONCRYL® 659-A | BASF Dispersions & Resins | Joncryl® 659-A is an acrylic colloidal emulsion for use in inks for pre-print and post-print corrugated board and kraft paper applications. It provides good transfer and printability at low polymer solids. | |
JONCRYL® 8383-A | BASF Dispersions & Resins | Joncryl® 8383-A has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. This emulsion is also very suitable for water and chemical resistant primers. (It can easily be over coated with a so...voir plus Joncryl® 8383-A has been designed for factory-applied clear and pigmented wood finishes, on fast drying lines at room temperature drying. This emulsion is also very suitable for water and chemical resistant primers. (It can easily be over coated with a solvent-based system.) Joncryl® 8383-A shows excellent water resistance, good hardness, block resistance, and excellent wet adhesion/elasticity (for outdoor purposes). It allows the formulation of a coating with a unique balance of chemical resistance, mechanical properties, and appearance. For outdoor purposes, Joncryl® 8383-A shows very good wet adhesion. The crosslinking chemistry of Joncryl® 8383-A allows drying at room and elevated temperatures. The good clarity, hardness development, and block resistance in combination with water resistance makes this product suitable for replacing some solvent-based coatings. voir moins | |
JONCRYL® 95 | BASF Dispersions & Resins | Joncryl® 95 is an ultra-fine particle size, acrylic emulsion designed for use in wood stain applications. It provides solution-like appearance and penetration properties along with reduced grain raising. Joncryl® 95 is recommended for interior waterborne ...voir plus Joncryl® 95 is an ultra-fine particle size, acrylic emulsion designed for use in wood stain applications. It provides solution-like appearance and penetration properties along with reduced grain raising. Joncryl® 95 is recommended for interior waterborne wood coatings for furniture or millwork applications voir moins | |
JONCRYL® FLX 5060 | BASF Dispersions & Resins | Joncryl® FLX 5060 is a self-crosslinking styrene acrylic emulsion with excellent resistance for surface print applications on film and foil. | |
JONCRYL® HPB 1631-A | BASF Dispersions & Resins | JONCRYL HPB 1631-A is a water-based, copolymer emulsion product offering low MVTR when applied to paper and board packaging. JONCRYL HPB 1631-A provides a solution when MVTR is a key peformance requirement. | |
JONCRYL® PRO 1522 | BASF Dispersions & Resins | Joncryl® PRO 1522 is an emulsion for direct-to-metal applications. It has excellent corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. This emulsion offers exterior durability, is compatible ...voir plus Joncryl® PRO 1522 is an emulsion for direct-to-metal applications. It has excellent corrosion resistance without the use of anti-corrosive pigments as determined by Salt Spray Resistance ASTM B 117. This emulsion offers exterior durability, is compatible with anti-corrosive pigments, and can be formulated between 100 – 250 g/l VOC. Recommended applications include interior/exterior general metal industrial coatings applications and OEM industrial direct-to-metal applications that require high gloss (> 80 at 60°) and a dry film thickness of 25 – 40 microns (1 – 1.5 mils). voir moins | |
JONCRYL® PRO 1537 | BASF Dispersions & Resins | Joncryl® PRO 1537 is an ultra-fine particle size acrylic emulsion polymer for general and specialty purpose industrial finishing and architectural paints. It provides a unique balance of expected acrylic benefits along with many “alkyd-like” features not ...voir plus Joncryl® PRO 1537 is an ultra-fine particle size acrylic emulsion polymer for general and specialty purpose industrial finishing and architectural paints. It provides a unique balance of expected acrylic benefits along with many “alkyd-like” features not found in other emulsion polymers. Joncryl® PRO 1537 is recommended for applications such as interior/exterior general metal industrial coating applications and interior/exterior architectural coatings. voir moins | |
MAINCOTE™ 4950 | Univar Solutions | MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosi...voir plus MAINCOTE™ 4950 is an aqueous acrylic polymer capable of being formulated to a less or equal to 50 g/L volatile organic content (VOC) coating for light to medium duty maintenance and industrial applications. It offers excellent exterior durability, corrosion resistance, and ease of formulation with excellent paint stability. It also offers good architectural gloss and trim paint properties. voir moins | Request Sample |
MAINCOTE™ AE-58 | Univar Solutions | MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for g...voir plus MAINCOTE™ AE-58 is an acrylic emulsion which reacts with epoxies offering coatings with paint characteristics such as low VOC, low toxicity, and low odor and the performance profile of conventional solvent-borne 2-pack epoxy finishes. It is designed for general-purpose acrylic/epoxy paints which can be used on a variety of substrates such as exterior and interior metal and concrete. Property benefits include a long pot-life, low-temperature property response, and improved durability. voir moins | Request Sample |
MAINCOTE™ HG-54D | Univar Solutions | MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial mainten...voir plus MAINCOTE™ HG-54D is an acrylic resin setting a performance standard for waterborne maintenance coatings, which can be formulated into corrosion resistant primers along with full gloss, durable topcoats for commercial, institutional, and industrial maintenance markets. voir moins | Request Sample |
MAINCOTE™ HG-56 | Univar Solutions | MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with imp...voir plus MAINCOTE™ HG-56 is an acrylic emulsion designed as a binder for maintenance coatings. While it is compositionally similar to MAINCOTE™ HG-54D, it offers improved reactive-pigment stability which achieve higher solids levels (50% vs. 41.5%), along with improved stability. voir moins | Request Sample |
MAINCOTE™ PR-71 | Univar Solutions | MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. T...voir plus MAINCOTE™ PR-71 is an acrylic waterborne emulsion which allows the coating manufacturer to supply primers that not only adhere to difficult metallic substrates, but also give good corrosion resistance over carbon steel in a wide application environment. This resin's ability to be topcoated by most solvent-based coating systems makes it a very versatile water-based primer. voir moins | Request Sample |
MOR-GLO™ G128 | Synthomer | MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated int...voir plus MOR-GLO™ G128 is a zinc-free floor finish, water-based styrene acrylic, polymer emulsion for high traffic applications, such as schools, hospitals and retail. MOR-GLO™ G128 is recommended for low maintenance floor finishes. It can be easily formulated into EPA Safer Choice, Green Seal and Ecologo certifiable floor finishes. voir moins | |
Ottopol 1320 | Gellner Industrial, LLC | Ottopol 1320 is a medium hard, tough, all anionic acrylic emulsion with outstanding chemical, abrasion and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. | |
Ottopol 1450 | Gellner Industrial, LLC | Ottopol 1450 is a hard modified anionic acrylic emulsion with abrasion and wear resistance. It has good UV resistance, chemical resistance and resistance to blush. Compatibility with urethane emulsions is outstanding providing essentially water clear blen...voir plus Ottopol 1450 is a hard modified anionic acrylic emulsion with abrasion and wear resistance. It has good UV resistance, chemical resistance and resistance to blush. Compatibility with urethane emulsions is outstanding providing essentially water clear blends. voir moins | |
Ottopol 151 | Gellner Industrial, LLC | Ottopol 151 is an anionic acrylic emulsion. | |
Ottopol 1960 | Gellner Industrial, LLC | Ottopol 1960 anionic acrylic emulsion is a high solids binder suitable for high performance sealants, patching compounds and contact adhesives as well as coating formulations. | |
Ottopol 25-50E | Gellner Industrial, LLC | Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic ink...voir plus Ottopol 25-50E is a milky white, acrylic emulsion, and it is one of three products in the Ottopol 25 Series. These water-based polymers are specifically designed for use as a grinding and let down vehicle for water based roto-gravure and flexo-graphic inks. It has excellent adhesion to substrates on PVC, polyester, polystyrene, and coated cellophane. This product imparts excellent flow and leveling to inks and coatings and provides high gloss and excellent press stability. It can also be used as a dispersion stabilizer, or purely for wetting purposes. voir moins | |
Ottopol 300 | Gellner Industrial, LLC | Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acry...voir plus Ottopol 300 is a flexible 100% anionic acrylic emulsion polymer with excellent film forming properties, resistance to grain cracking and flaking when applied over bare wood. It also exhibits superior tint retention when compared to other conventional acrylic polymers. voir moins | |
Ottopol 503 | Gellner Industrial, LLC | Ottopol 503 is a non-ionic acrylic emulsion. It serves as a hard acrylic resin designed to increase the blocking of ordinary systems. It achieves excellent compatibility with a wide range of resins. Improves resistance properties of a standard ink or coat...voir plus Ottopol 503 is a non-ionic acrylic emulsion. It serves as a hard acrylic resin designed to increase the blocking of ordinary systems. It achieves excellent compatibility with a wide range of resins. Improves resistance properties of a standard ink or coating. voir moins | |
Ottopol K-12T | Gellner Industrial, LLC | Ottopol K-12T is a cationic acrylic emulsion used as a rust converting primer. It converts the rust within minutes of the coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It does ...voir plus Ottopol K-12T is a cationic acrylic emulsion used as a rust converting primer. It converts the rust within minutes of the coating application and forms a black iron oxide barrier which can further be top-coated with water or solvent-based paints. It does not contain tannic acid, oxime chelates, gallic acid, phosphates or phosphoric acid. This product can also be used in stain blocking primers. voir moins | |
Ottopol K-23 | Gellner Industrial, LLC | Ottopol K-23 is an alkali resistant cationic acrylic copolymer emulsion. It is designed for use as a grinding and letdown vehicle for waterbased flexographic and rotogravure inks. It is also suitable for use as an overprint varnish. The emulsion character...voir plus Ottopol K-23 is an alkali resistant cationic acrylic copolymer emulsion. It is designed for use as a grinding and letdown vehicle for waterbased flexographic and rotogravure inks. It is also suitable for use as an overprint varnish. The emulsion characteristics provide higher solids and better gloss. Positive charge allows inks and coatings made with Ottopol K-23 to have exceptionally good adhesion to plastic films such as polyethylene, PVC, polyester, and polystyrene. voir moins | |
Ottopol K-65 | Gellner Industrial, LLC | Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...voir plus Ottopol K-65 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-65 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. voir moins | |
Ottopol K-66 | Gellner Industrial, LLC | Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from...voir plus Ottopol K-66 is a translucent hard cationic acrylic emulsion. Non-ionic pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. The dry resin produced from this product is impermeable to alkali without the use of cross-linking agents. The positive charge of Ottopol K-66 allows inks and coatings to have exceptionally good adhesion to plastic films such as mylar, PVC, and polystyrene. It also has excellent adhesion to foil and other metallic surfaces. voir moins | |
Ottopol M-49 | Gellner Industrial, LLC | Ottopol M-49 is a milky anionic acrylic emulsion with a excellent adhesion properties, that has been neutralized with Dimethylethanolamine (DMEA). This combination yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA doe...voir plus Ottopol M-49 is a milky anionic acrylic emulsion with a excellent adhesion properties, that has been neutralized with Dimethylethanolamine (DMEA). This combination yields excellent pigment wetting. The exclusion of ammonia and neutralization with DMEA does not promote the tarnishing of metallic pigments. The product has been proven to provide good aging stability and compatibility with additives and other resin systems. voir moins | |
Ottopol S-100 | Gellner Industrial, LLC | Ottopol S-100 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-100 provides excellent resolubility properties for flexo and ...voir plus Ottopol S-100 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-100 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin provides non-curling properties on paper. voir moins | |
Ottopol S-30 | Gellner Industrial, LLC | Ottopol S-30 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-30 provides excellent resolubility properties for flexo and gr...voir plus Ottopol S-30 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-30 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. voir moins | |
Ottopol S-50 | Gellner Industrial, LLC | Ottopol S-50 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-50 provides excellent resolubility properties for flexo and gr...voir plus Ottopol S-50 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-50 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. voir moins | |
Ottopol S-75 | Gellner Industrial, LLC | Ottopol S-75 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-75 provides excellent resolubility properties for flexo and gr...voir plus Ottopol S-75 is a translucent acrylic emulsion. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require hard film. Ottopol S-75 provides excellent resolubility properties for flexo and gravure printing applications. Its the flow and leveling characteristics will provide a high gloss finish. The resin also provides non-curling properties. voir moins | |
Ottopol SF 49 | Gellner Industrial, LLC | Ottopol SF 49 is a self crosslinking acrylic emulsion that has outstanding water resistance and will not blush even after prolonged exposure to water. It can be formulated into a corrosion resistant primer or semi-gloss paint. | |
Ottopol SF-42 | Gellner Industrial, LLC | Ottopol SF-42 is a translucent, anionic acrylic emulsion that is compatible with water-reducible alkyd emulsions. | |
Ottopol SF-45 | Gellner Industrial, LLC | Ottopol SF-45 is a translucent, anionic acrylic emulsion. This unique acrylic polymer results in a high density, cross linked polymer upon drying at room temperature. Many coatings can be derived from this polymer where solvent resistance is required. | |
Ottopol SX-100 | Gellner Industrial, LLC | Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using...voir plus Ottopol SX-100 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks and coatings using this product have exceptionally good adhesion to vinyl and other non-porous substrates that require a hard film. Due to the internally cross-linking mechanism, Ottopol SX-100's block and scuff resistance is improved over conventional vehicles. It also provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of this product provides a high gloss finish and non-curling properties on paper. voir moins | |
Ottopol SX-30 | Gellner Industrial, LLC | Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...voir plus Ottopol SX-30 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-30 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. The resin provides non-curling properties on paper. voir moins | |
Ottopol SX-50 | Gellner Industrial, LLC | Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...voir plus Ottopol SX-50 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-50 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-50's block and scuff resistance is improved over conventional vehicles. voir moins | |
Ottopol SX-75 | Gellner Industrial, LLC | Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product ...voir plus Ottopol SX-75 is a translucent self cross-linking acrylic emulsion. It is resistant to alkali with the use of an internal cross-linking mechanism. The polymer will exhibit resistance to solvents, such as diluted alcohol solutions. Inks using this product have exceptionally good adhesion to plastic films, foil, and other metallic surfaces. Ottopol SX-75 provides excellent resolubility properties for flexo and gravure printing applications. The flow and leveling characteristics of the product will provide a high gloss finish. Due to the internally cross-linking mechanism, Ottopol SX-75's block and scuff resistance is improved over conventional vehicles. voir moins | |
Picassian® AC-192 | Stahl Polymers | Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good sc...voir plus Picassian® AC-192 is a waterbased, anionic, self crosslinking acrylic emulsion that contains free hydroxyl groups. It is used in furniture coatings, wood floor primers, and sanding sealers. This product has good chemical resistance properties, has good scratch resistance properties, has good transparency properties, is easy to sand, is quick to sand, and is crosslinkable with isocyanates. voir moins | |
PLIOTEC® SC 75 | Omnova Solutions | PLIOTEC® SC 75 is a self-crosslinking acrylic emulsion. It is APE free, and offers excellent UV resistance, good blocking resistance, and low coalescent demand. This product shows excellent adhesion to many substrates, including cold rolled steel, and can...voir plus PLIOTEC® SC 75 is a self-crosslinking acrylic emulsion. It is APE free, and offers excellent UV resistance, good blocking resistance, and low coalescent demand. This product shows excellent adhesion to many substrates, including cold rolled steel, and can be formulated as a zero VOC product. This product is recommended for porch and floor enamels, from flat to semi-gloss finishes, as well as vertical pigmented stains, pigmented pool deck coatings, and concrete and wood stains and enamels. voir moins | |
Raycryl® 1001 | Specialty Polymers | RayCry® 1001 is a 100% self-crosslinking, ultra low VOC, acrylic emulsion polymer with excellent resistance to water blushing, chemical and hot tire stains. Features adhesion to a wide variety of substrates and good exterior durability. Designed for use i...voir plus RayCry® 1001 is a 100% self-crosslinking, ultra low VOC, acrylic emulsion polymer with excellent resistance to water blushing, chemical and hot tire stains. Features adhesion to a wide variety of substrates and good exterior durability. Designed for use in exterior and interior cement surfaces and industrial wood finishes, RayCryl® 1001 can be formulated into both pigmented and clear coatings. voir moins | |
RayCryl® 1049RJ | Specialty Polymers | RayCryl® 1049RJ is a 100% acrylic polymer designed to provide outstanding exterior durability and UV resistance. Coatings formulated with RayCryl® 1049RJ exhibit excellent wet adhesion and high gloss. It offers low coalescent demand and can be formulated ...voir plus RayCryl® 1049RJ is a 100% acrylic polymer designed to provide outstanding exterior durability and UV resistance. Coatings formulated with RayCryl® 1049RJ exhibit excellent wet adhesion and high gloss. It offers low coalescent demand and can be formulated to meet stringent VOC regulations. Has superior wet adhesion properties. Suggested for use in exterior architectural coatings and primers. voir moins | |
RayCryl® 1200 | Specialty Polymers | RayCryl® 1200 is an all-purpose, environmentally friendly acrylic emulsion for exterior and interior coatings. Coatings formulated with RayCryl® 1200 offer outstanding color and gloss retention. It is easy to formulate to meet California VOC regulations. ...voir plus RayCryl® 1200 is an all-purpose, environmentally friendly acrylic emulsion for exterior and interior coatings. Coatings formulated with RayCryl® 1200 offer outstanding color and gloss retention. It is easy to formulate to meet California VOC regulations. Features excellent exterior durability, and excellent adhesion to multiple substrates. Is APEO-free. voir moins | |
RayCryl® 1240 | Specialty Polymers | RayCryl® 1240 is an acrylic emulsion designed specifically for the industrial wood applications. Clear coatings formulated with RayCryl® 1240 provides minimal grain raise and shows the natural warmth of the wood. RayCryl® 1240 is used in sanding sealers a...voir plus RayCryl® 1240 is an acrylic emulsion designed specifically for the industrial wood applications. Clear coatings formulated with RayCryl® 1240 provides minimal grain raise and shows the natural warmth of the wood. RayCryl® 1240 is used in sanding sealers and transparent wood stains application. Offers excellent adhesion. voir moins | |
RAYCRYL® 1240 | Specialty Polymers, Inc. | RAYCRYL® 1240 is anionic all-acrylic emulsion. This product can be used in metal and wood applications. RAYCRYL® 1240 primary use is as a sanding sealer, it adheres to metal or wood surfaces and has minimal grain raise and fills in the pours after the sur...voir plus RAYCRYL® 1240 is anionic all-acrylic emulsion. This product can be used in metal and wood applications. RAYCRYL® 1240 primary use is as a sanding sealer, it adheres to metal or wood surfaces and has minimal grain raise and fills in the pours after the surface has been sanded to seal the surface. voir moins | |
RayCryl® 1500 | Specialty Polymers | RayCryl® 1500 is a high performance, environmentally friendly acrylic. Ideal for high gloss and semi-gloss trim coatings, RayCryl® 1500 has outstanding color and gloss retention. It has excellent early block resistance and can be formulated at less than 5...voir plus RayCryl® 1500 is a high performance, environmentally friendly acrylic. Ideal for high gloss and semi-gloss trim coatings, RayCryl® 1500 has outstanding color and gloss retention. It has excellent early block resistance and can be formulated at less than 50 g/L VOC. Has excellent adhesion to multiple substrates. voir moins | |
RayCryl® 1526 | Specialty Polymers | RayCryl® 1526 is an APEO free, 100% acrylic emulsion polymer designed for both interior and exterior trim enamel applications. It exhibits high gloss, good color acceptance and excellent rheology response. RayCryl® 1526 provides excellent adhesion to wood...voir plus RayCryl® 1526 is an APEO free, 100% acrylic emulsion polymer designed for both interior and exterior trim enamel applications. It exhibits high gloss, good color acceptance and excellent rheology response. RayCryl® 1526 provides excellent adhesion to wood, aged alkyd, and cementaceous substrates. It imparts very good water resistance for low VOC concrete sealers. voir moins | |
RAYCRYL® 1526 | Specialty Polymers, Inc. | RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the woo...voir plus RAYCRYL® 1526 is an anionic APEO free, fully acrylic emulsion polymer. This product was intended for applying both interior and exterior trim enamel. It has a high gloss finish, color recognition and rheology. RAYCRYL® 1526 is applied to adhere to the wood, aged alkyd, and cement surfaces; and is primarily used to protect surfaces from water resistance and a sealer for concrete. voir moins | |
RayCryl® 1809 | Specialty Polymers | RayCryl® 1809 is a flexible 100% acrylic self crosslinking emulsion polymer designed for use in domestic fabric coatings and gesso base coatings. In addition, RayCryl® 1809 is receptive to solvent based and UV inks, and non-yellowing. | |
RayCryl® 1850 | Specialty Polymers | RayCryl® 1850 is a self crosslinking 100% acrylic emulsion polymer designed for textile applications such as foam, pad, spray, knife, and roller coatings. RayCry® 1850 exhibits medium flexible free film which produces medium hand with excellent strength. ...voir plus RayCryl® 1850 is a self crosslinking 100% acrylic emulsion polymer designed for textile applications such as foam, pad, spray, knife, and roller coatings. RayCry® 1850 exhibits medium flexible free film which produces medium hand with excellent strength. RayCryl® 1850 has good compatibility with melamine to enhance durability. RayCryl® 1850 provides outstanding pigment compatibility and pigment binding capacity which can be used in deep color applications. Has outstanding UV resistance. voir moins | |
RayCryl® 1853 | Specialty Polymers | RayCryl® 1853 is a high solids 100% acrylic emulsion polymer. Is self crosslinking, an excellent foamer, APEO free, and can be filled with clay, corn starch or calcium carbonate. It develops a soft and flexible film that can be used for domestic or indust...voir plus RayCryl® 1853 is a high solids 100% acrylic emulsion polymer. Is self crosslinking, an excellent foamer, APEO free, and can be filled with clay, corn starch or calcium carbonate. It develops a soft and flexible film that can be used for domestic or industrial textile fabric coatings. Has outstanding UV resistance and film clarity. voir moins | |
RayCryl® 1856 | Specialty Polymers | RayCryl® 1856 is a high solids 100% acrylic emulsion polymer. It develops a hard film that can be used for domestic or industrial textile fabric and foam coatings. Features include self crosslinking and carboxyl group, hard free film, is an excellent foam...voir plus RayCryl® 1856 is a high solids 100% acrylic emulsion polymer. It develops a hard film that can be used for domestic or industrial textile fabric and foam coatings. Features include self crosslinking and carboxyl group, hard free film, is an excellent foamer, APEO free, can be filled with clay, starch or calcium carbonate, and has outstanding UV resistance and film clarity. voir moins | |
RayCryl® 1859 | Specialty Polymers | RayCryl® 1859 is a high solids 100% acrylic emulsion polymer that develops a medium flexible film that can be used for domestic or industrial textile fabric coatings. Is apart of a self crosslinking and carboxyl group. Features a medium flexible free film...voir plus RayCryl® 1859 is a high solids 100% acrylic emulsion polymer that develops a medium flexible film that can be used for domestic or industrial textile fabric coatings. Is apart of a self crosslinking and carboxyl group. Features a medium flexible free film, is an excellent foamer, APEO free, can be filled with clay, starch or calcium carbonate, and has outstanding UV resistance and film clarity. voir moins | |
RayCryl® 30S | Specialty Polymers | RayCryl® 30S is an acrylic emulsion designed for improving block resistance of architectural trim enamels and industrial primers and topcoats. It has good compatibility with a wide range of acrylics. RayCryl® 30S can be blended at levels of 5 – 15% for im...voir plus RayCryl® 30S is an acrylic emulsion designed for improving block resistance of architectural trim enamels and industrial primers and topcoats. It has good compatibility with a wide range of acrylics. RayCryl® 30S can be blended at levels of 5 – 15% for improved hardness and blocking abilities. voir moins | |
RayCryl® 347 | Specialty Polymers | RayCryl® 347 is a versatile acrylic emulsion for blush resistant coatings over wood and masonry. Specifically designed to provide excellent waterproofing characteristics, RayCryl® 347 can be used to formulate low VOC coatings. With its small particle size...voir plus RayCryl® 347 is a versatile acrylic emulsion for blush resistant coatings over wood and masonry. Specifically designed to provide excellent waterproofing characteristics, RayCryl® 347 can be used to formulate low VOC coatings. With its small particle size, stains formulated with RayCryl® 347 have outstanding penetration. voir moins | |
RayCryl® 410 | Specialty Polymers | RayCryl® 410 is a 100% acrylic emulsion designed for blending with cement and concrete products. Specifically designed as a polymer modifier for cement, RayCryl® 410 provides excellent workability, flexibility and compressive strength. It exhibits outstan...voir plus RayCryl® 410 is a 100% acrylic emulsion designed for blending with cement and concrete products. Specifically designed as a polymer modifier for cement, RayCryl® 410 provides excellent workability, flexibility and compressive strength. It exhibits outstanding pot life under high temperature condition. voir moins | |
RAYCRYL® 410 | Specialty Polymers, Inc. | RAYCRYL® 410 is a 100% nonionic acrylic emulsion intended for mixing with cement and concrete products. Precisely intended as a polymer modifier for cement, RAYCRYL® 410 provides feasible, flexible and strength. Due to its performance under high temperatu...voir plus RAYCRYL® 410 is a 100% nonionic acrylic emulsion intended for mixing with cement and concrete products. Precisely intended as a polymer modifier for cement, RAYCRYL® 410 provides feasible, flexible and strength. Due to its performance under high temperature conditions RAYCRYL® 410 exhibits an exceptional pot life. The primary use for this product is as a concrete and elastomeric application. voir moins | |
RayCryl® 4100 | Specialty Polymers | RayCryl® 4100 is a self-crosslinking, 100% acrylic emulsion for industrial wood coatings. The product is specifically formulated to provide a ready-to-use, self sealing system. RayCryl® 4100 provides outstanding mar resistance, early hardness and very hig...voir plus RayCryl® 4100 is a self-crosslinking, 100% acrylic emulsion for industrial wood coatings. The product is specifically formulated to provide a ready-to-use, self sealing system. RayCryl® 4100 provides outstanding mar resistance, early hardness and very high gloss in clear wood finishes. This product can be formulated both as a basecoat and as a topcoat, for pigmented wood coatings. Key Features include excellent color retention and film clarity, outstanding mar resistance and hardness, and ready-to-use, self sealing system in clear finishes. Suggested for use in kitchen cabinets, fine wood finishes, interior shutters, and factory applied wood lacquers. voir moins | |
RayCryl® 4102 | Specialty Polymers | RayCryl® 4102 is a self crosslinking acrylic emulsion polymer designed to provide outstanding performance properties for industrial wood application. Coatings made with RayCryl® 4102 will provide excellent clarity, superior mar and scratch resistance and ...voir plus RayCryl® 4102 is a self crosslinking acrylic emulsion polymer designed to provide outstanding performance properties for industrial wood application. Coatings made with RayCryl® 4102 will provide excellent clarity, superior mar and scratch resistance and minimal grain raise. Also features excellent stain and chemical resistance, and is compatible with PUD’s. voir moins | |
RayCryl® 4108 | Specialty Polymers | RayCryl® 4108 is an APEO-free, self crosslinking acrylic emulsion polymer designed to provide outstanding performance properties for industrial and architectural finishes. Suggested uses include concrete stains and sealers, floor paint, and industrial woo...voir plus RayCryl® 4108 is an APEO-free, self crosslinking acrylic emulsion polymer designed to provide outstanding performance properties for industrial and architectural finishes. Suggested uses include concrete stains and sealers, floor paint, and industrial wood finishes. Coatings made with RayCryl® 4108 will provide high gloss, exceptional early water and blush resistance and clarity. Additionally, coatings made with RayCryl® 4108 have superior mar and scratch resistance and minimal grain raise. Other key features include excellent stain and hot tire pick up resistance, superior adhesion and UV properties, outstanding UV and exterior durability, high gloss, and is compatible with PUDs. voir moins | |
RayCryl® 458 | Specialty Polymers | RayCryl® 458 is a 100% acrylic emulsion polymer designed to provide outstanding exterior durability and UV resistance. Is APEO free. Coatings formulated with RayCryl® 458 exhibit compatibility with cement and sand mixtures for repairs, EIFS, grouts, and d...voir plus RayCryl® 458 is a 100% acrylic emulsion polymer designed to provide outstanding exterior durability and UV resistance. Is APEO free. Coatings formulated with RayCryl® 458 exhibit compatibility with cement and sand mixtures for repairs, EIFS, grouts, and decorative overlays. Suggested for use in exterior architectural coatings, textured coatings, and polymer admix. voir moins | |
RayCryl® 459 | Specialty Polymers | RayCryl® 459 is a 100% acrylic emulsion polymer designed to provide outstanding exterior durability and UV resistance. Has a low odor, and is APEO free. Coatings formulated with RayCryl® 459 exhibit compatibility with cement and sand mixtures for repairs,...voir plus RayCryl® 459 is a 100% acrylic emulsion polymer designed to provide outstanding exterior durability and UV resistance. Has a low odor, and is APEO free. Coatings formulated with RayCryl® 459 exhibit compatibility with cement and sand mixtures for repairs, EIFS, grouts, and decorative overlays. Suggested for use in exterior architectural coatings, textured coatings, and polymer admix. voir moins | |
RayCryl® 604A | Specialty Polymers | RayCryl® 604A is a high performance, all acrylic emulsion polymer for industrial wood and concrete applications. Coatings formulated with RayCryl® 604A are durable, and have excellent adhesion. RayCryl® 604A was specifically designed to crosslink with zin...voir plus RayCryl® 604A is a high performance, all acrylic emulsion polymer for industrial wood and concrete applications. Coatings formulated with RayCryl® 604A are durable, and have excellent adhesion. RayCryl® 604A was specifically designed to crosslink with zinc, and is compatible with polyurethane dispersions. This capability further enhances the coating’s overall performance properties, including its chemical resistance. voir moins | |
RayCryl® 61 | Specialty Polymers | RayCryl® 61 is a 100% acrylic polymer with outstanding exterior durability. The polymer is specifically designed with low surfactant levels, which provides excellent water resistance. RayCryl® 61 has a higher level of solids, and is easy to formulate. Fea...voir plus RayCryl® 61 is a 100% acrylic polymer with outstanding exterior durability. The polymer is specifically designed with low surfactant levels, which provides excellent water resistance. RayCryl® 61 has a higher level of solids, and is easy to formulate. Features outstanding UV durability. Suggested for use in exterior architectural coatings and primers. voir moins | |
RayCryl® 708E | Specialty Polymers | RayCryl® 708E is an all acrylic emulsion designed for low VOC coatings, sealers and stains on wide range of substrates. Its unique core-shell technology provides good water resistance and hardness with low coalescent demand. It has outstanding UV durabili...voir plus RayCryl® 708E is an all acrylic emulsion designed for low VOC coatings, sealers and stains on wide range of substrates. Its unique core-shell technology provides good water resistance and hardness with low coalescent demand. It has outstanding UV durability which allows it to be formulated into exterior coatings for both wood and cement based substrates. Suggested for use in concrete sealers, roof tile sealers, and deck stains. voir moins | |
RAYCRYL® 708E | Specialty Polymers, Inc. | RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It...voir plus RAYCRYL® 708E is a clear anionic all-acrylic emulsion intended for low VOC coatings on porch and floor enamels. This product is primarily used for sealers and stains on a wide variety of surfaces and provides UV protection for outdoor woods and cement. It has an exclusive core-shell technology that provides water resistance after it cures and hardens. voir moins | |
RayCryl® 718I | Specialty Polymers | RayCryl® 718i is a self-crosslinking acrylic emulsion polymer with excellent adhesion to wood and concrete substrates. Specifically designed to have a low level of surfactant, RayCryl® 718i exhibits low foaming characteristics. This feature makes it an id...voir plus RayCryl® 718i is a self-crosslinking acrylic emulsion polymer with excellent adhesion to wood and concrete substrates. Specifically designed to have a low level of surfactant, RayCryl® 718i exhibits low foaming characteristics. This feature makes it an ideal product for flat line industrial applications. Coatings formulated with RayCryl® 718i have excellent block and water resistance. voir moins | |
RayCryl® 767 | Specialty Polymers | RayCryl® 767 is a hard, reactive acrylic emulsion for waterborne thermoset clears and enamels. Its crosslinkable chemistry offers outstanding block and water resistance as well as excellent exterior durability. It can be reacted with melamine formaldehyde...voir plus RayCryl® 767 is a hard, reactive acrylic emulsion for waterborne thermoset clears and enamels. Its crosslinkable chemistry offers outstanding block and water resistance as well as excellent exterior durability. It can be reacted with melamine formaldehyde resin to allow for extremely high performance and durable finish. Key features also include excellent UV resistance and exterior durability suggested for use in interior/exterior primers and topcoats, as well as doorskin coatings. voir moins | |
RayCryl® 775 | Specialty Polymers | RayCryl® 775 is a high performance all acrylic emulsion polymer designed for industrial wood and concrete applications. Coatings formulated with RayCryl® 775 provide excellent adhesion and have outstanding durability. The chemistry in RayCryl® 775 allows ...voir plus RayCryl® 775 is a high performance all acrylic emulsion polymer designed for industrial wood and concrete applications. Coatings formulated with RayCryl® 775 provide excellent adhesion and have outstanding durability. The chemistry in RayCryl® 775 allows it to crosslink with zinc; in addition the polymer is compatible with polyurethane dispersions. These features can increase both the chemical resistance and performance properties of coatings formulated with RayCryl® 775. voir moins | |
RAYCRYL® 918K | Specialty Polymers, Inc. | RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to...voir plus RAYCRYL® 918K is an anionic reactive acrylic emulsion for catalyzed systems. This product has a crosslinkable chemical build up that allows it to block and resist water, along with outdoor stability. RAYCRYL® 918K has a hydroxyl utility that allows it to react to isocyanate and gives it chemical resistance. The primary use for this product is to be used as a topcoat and provide surfaces such as cement and wood with chemical, water and UV resistance. voir moins | |
RAYCRYL® H30S | Specialty Polymers, Inc. | RAYCRYL® H30S is an anionic acrylic blocking additive emulsion. This product is fully intended for refining blocking resistance of architectural trim enamels, industrial primers and topcoats. It is compatible with several different acrylics. RAYCRYL® H30S...voir plus RAYCRYL® H30S is an anionic acrylic blocking additive emulsion. This product is fully intended for refining blocking resistance of architectural trim enamels, industrial primers and topcoats. It is compatible with several different acrylics. RAYCRYL® H30S can be combined at levels of 5 – 15% for enhanced hardness and blocking abilities. The primary use of RAYCRYL® H30S is that it can be combined with a wide range of acrylics thus improving the blocking abilities. voir moins | |
RayFlex® 118 | Specialty Polymers | RayFlex® 118 is a high solids, high performance, all acrylic emulsion polymer specifically designed for wall mastic, caulks, and sealants, and roof coating applications. Coatings formulated with RayFlex® 118 have outstanding elongation and flexibility. Ra...voir plus RayFlex® 118 is a high solids, high performance, all acrylic emulsion polymer specifically designed for wall mastic, caulks, and sealants, and roof coating applications. Coatings formulated with RayFlex® 118 have outstanding elongation and flexibility. RayFlex® 118 also provides excellent adhesion and water resistance. voir moins | |
RayFlex® 164 | Specialty Polymers | RayFlex® 164 is a tacky elastomeric acrylic polymer. Coatings formulated with this product have good adhesion to both polar and non polar substrates. RayFlex® 164 has excellent low temperature flexibility, and it can be used to add flexibility to harder p...voir plus RayFlex® 164 is a tacky elastomeric acrylic polymer. Coatings formulated with this product have good adhesion to both polar and non polar substrates. RayFlex® 164 has excellent low temperature flexibility, and it can be used to add flexibility to harder polymers. It is tacky at room temperature, which allows it to be used in dust collection applications. Is pressure sensitive and maintains tack with aging. voir moins | |
RayFlex® 2024 | Specialty Polymers | RayFlex® 2024 is a 100% acrylic elastomeric emulsion polymer designed for wall mastic and roof coatings. Coatings formulated with RayFlex® 2024 have outstanding exterior durability and UV resistance. The chemistry of RayFlex® 2024 offers high elongation a...voir plus RayFlex® 2024 is a 100% acrylic elastomeric emulsion polymer designed for wall mastic and roof coatings. Coatings formulated with RayFlex® 2024 have outstanding exterior durability and UV resistance. The chemistry of RayFlex® 2024 offers high elongation and tensile strength properties. Also features low temperature flexibility and excellent dirt pick up resistance. voir moins | |
RAYFLEX® 2024 | Specialty Polymers, Inc. | RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has el...voir plus RAYFLEX® 2024 is a nonionic/anionic fully acrylic elastomeric emulsion polymer. This product is intended for roof coatings and wall mastic adhesive. Its formulation provides outdoor stability and UV protection. The chemical buildup of RAYFLEX® 2024 has elongated tensile strength and has low temperature flexibility. The primary use of this product is to be applied to outdoor roofing and provide durability and UV protection. voir moins | |
RayFlex® 2044L | Specialty Polymers | RayFlex® 2044L is a very soft acrylic emulsion polymer designed for dust capture and holding through proper dry-tack performance in high loft air filtration media. RayFlex® 2044L improves fiber-to-fiber bonding and adjustable tack levels through blending. | |
RayFlex® 303 | Specialty Polymers | RayFlex® 303 is a high-solids, acrylic elastomeric emulsion polymer for high performance wall mastics and roof coatings. RayFlex® 303 is specifically designed to provide outstanding adhesion to a wide range of construction substrates. Coatings formulated ...voir plus RayFlex® 303 is a high-solids, acrylic elastomeric emulsion polymer for high performance wall mastics and roof coatings. RayFlex® 303 is specifically designed to provide outstanding adhesion to a wide range of construction substrates. Coatings formulated with RayFlex® 303 have excellent exterior durability, UV resistance, tensile properties and dirt pick-up resistance. voir moins | |
RayFlex® 613 | Specialty Polymers | RayFlex® 613 is a high solids, high performance, all acrylic emulsion polymer. Specifically designed for wall mastics, caulks, sealants, chinking compounds and roof coatings applications, RayFlex® 613 can be formulated at a higher volume solids, and with ...voir plus RayFlex® 613 is a high solids, high performance, all acrylic emulsion polymer. Specifically designed for wall mastics, caulks, sealants, chinking compounds and roof coatings applications, RayFlex® 613 can be formulated at a higher volume solids, and with high pigment loads. Coatings formulated with RayFlex® 613 have excellent flexibility and crack resistance, exhibit less shrinkage, and provide outstanding joint movement capability. Other key features include outstanding adhesion, and superior exterior durability. voir moins | |
RayFlex® 683 | Specialty Polymers | RayFlex® 683 is a flexible, soft polymer designed for leather and textile applications. Coatings formulated with RayFlex® 683 provide excellent adhesion, water resistance and color retention. | |
RayFlex® 777 | Specialty Polymers | RayFlex® 777 is an APEO and formaldehyde free, self-crosslinking 100% acrylic emulsion polymer designed for flexible roof coatings. Coatings formulated with RayFlex 777 have excellent water and efflorescence resistance, low temperature flexibility and out...voir plus RayFlex® 777 is an APEO and formaldehyde free, self-crosslinking 100% acrylic emulsion polymer designed for flexible roof coatings. Coatings formulated with RayFlex 777 have excellent water and efflorescence resistance, low temperature flexibility and outstanding tensile properties. RayFlex 777 provides superior adhesion to polyurethane foam and various construction substrates. Suggested for use in flexible roof coatings. voir moins | |
RAYFLEX® 777 | Specialty Polymers, Inc. | RAYFLEX® 777 is an anionic APEO and formaldehyde free, self-crosslinking fully acrylic emulsion polymer. This product is intended for flexible roof coatings. The formulation of RAYFLEX® 777 exhibits water, efflorescence and UV resistance. It has low tempe...voir plus RAYFLEX® 777 is an anionic APEO and formaldehyde free, self-crosslinking fully acrylic emulsion polymer. This product is intended for flexible roof coatings. The formulation of RAYFLEX® 777 exhibits water, efflorescence and UV resistance. It has low temperature flexibility and tensile properties that adhere to polyurethane foam and different construction substrates. RAYFLEX® 777 primary uses are to coat construction roofs and provide UV protection, water resistance and temperature flexibility. voir moins | |
RAYKOTE® 1431 | Specialty Polymers, Inc. | RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufa...voir plus RAYKOTE® 1431 is a clear anionic styrene acrylic emulsion polymer. This product is intended as a cost-effective and user-friendly emulsion. The primary use for this product is for industrial wood and primer applications. RAYKOTE® 1431 is applied on manufactured interiors and exterior wood primers. voir moins | |
RAYKOTE® 1446G | Specialty Polymers, Inc. | RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for pr...voir plus RAYKOTE® 1446G is an anionic styrene acrylic emulsion polymer. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 1446G is primarily used for corrosion and water protection by being applied in a coating generally made for primer applications. voir moins | |
RAYKOTE® 1515 | Specialty Polymers, Inc. | RAYKOTE® 1515 is anionic styrene acrylic emulsion that is classified as an efflorescence resistant polymer. This product is designed for masonry, plaster and concrete applications. RAYKOTE® 1515 provides protection against water, alkali metals and efflore...voir plus RAYKOTE® 1515 is anionic styrene acrylic emulsion that is classified as an efflorescence resistant polymer. This product is designed for masonry, plaster and concrete applications. RAYKOTE® 1515 provides protection against water, alkali metals and efflorescence corrosion. It is best for rough surfaces as it has pigment binding ability and steadiness when it is used as part of the grind base. The primary use of this product is to be applied so it adheres to a surface and is used to protect against water and other chemical corrosion. RAYKOTE® 1515 can also be blended with other resins. voir moins | |
RAYKOTE® 1610 | Specialty Polymers, Inc. | RAYKOTE® 1610 is an anionic styrene acrylic emulsion. This product has the capabilities to adhere to multiple different surfaces. RAYKOTE® 1610 is primarily used for water resistance on several different surfaces due to its low surfactant loading. It pass...voir plus RAYKOTE® 1610 is an anionic styrene acrylic emulsion. This product has the capabilities to adhere to multiple different surfaces. RAYKOTE® 1610 is primarily used for water resistance on several different surfaces due to its low surfactant loading. It passes class A type 1 ASTM C1315 for concrete and also passes KCMA. voir moins | |
RAYKOTE® 2000 | Specialty Polymers, Inc. | RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. R...voir plus RAYKOTE® 2000 is an anionic styrene acrylic emulsion polymer that is developed to have a low film forming temperature, and easily is formulated into VOC for indoor and outdoor primers. This product is intended to provide a tannin stain block resistance. RAYKOTE® 2000 is a formulated coating that is able to adhere wet and dry to galvanized, aluminum, wood and aged alkyd enamel materials. voir moins | |
RAYKOTE® 2001 | Specialty Polymers, Inc. | RAYKOTE® 2001 is an anionic styrene acrylic emulsion. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 2001 is primarily used for corrosion and water protection by being applied to light general industrial direct-to-metal ...voir plus RAYKOTE® 2001 is an anionic styrene acrylic emulsion. This product adheres to metal surfaces as a coating with a gloss finish. RAYKOTE® 2001 is primarily used for corrosion and water protection by being applied to light general industrial direct-to-metal and primer applications. voir moins | |
RAYKOTE® 2010 | Specialty Polymers, Inc. | RAYKOTE® 2010 is an anionic styrene acrylic polymer intended for high performance, low VOC coatings. This product is an industrial maintenance coating and can be formulated into corrosion-resistant primers, highly durable topcoats and high gloss direct-to...voir plus RAYKOTE® 2010 is an anionic styrene acrylic polymer intended for high performance, low VOC coatings. This product is an industrial maintenance coating and can be formulated into corrosion-resistant primers, highly durable topcoats and high gloss direct-to-metal finishes. RAYKOTE® 2010 can adhere to several different metal surfaces. It is primarily used as a coalescent demanded coating that provides early water resistance and formulated that can meet strict VOC regulations voir moins | |
RayKote® 2012 | Specialty Polymers | RayKote® 2012 is a styrene acrylic emulsion copolymer. It is explicitly designed to provide excellent adhesion and high gloss to various metal substrates. Coatings formulated with RayKote 2012 exhibits outstanding corrosion and early water resistance for ...voir plus RayKote® 2012 is a styrene acrylic emulsion copolymer. It is explicitly designed to provide excellent adhesion and high gloss to various metal substrates. Coatings formulated with RayKote 2012 exhibits outstanding corrosion and early water resistance for direct-to-metal and primer applications. RayKote 2012 is mainly used for light general industrial applications. voir moins | |
RAYKOTE® 444S | Specialty Polymers, Inc. | RAYKOTE® 444S is a styrene acrylic emulsion that is an additive for cement emulsions. This styrene acrylic emulsion is intended to be used as a polymer modifier for cement. RAYKOTE® 444S is compatible with “green” cement to produce flexible concrete patch...voir plus RAYKOTE® 444S is a styrene acrylic emulsion that is an additive for cement emulsions. This styrene acrylic emulsion is intended to be used as a polymer modifier for cement. RAYKOTE® 444S is compatible with “green” cement to produce flexible concrete patches and overlays. This product is primarily used for crack resistance in cement due to its strong bonding properties. This cement admix is to be used indoors and outdoors on commercial, industrial and infrastructures due to the durability. voir moins | |
RAYPLUS™ 1098 | Specialty Polymers, Inc. | RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resis...voir plus RAYPLUS™ 1098 is a transparent anionic core shell acrylic emulsion polymer, intended to be a topcoat. RAYPLUS™ 1098 is primarily used in coatings to adhere to wood, concrete and plastic materials. This product provides a clear glossy topcoat that is resistant to water, UV rays and chemical abrasion. voir moins | |
RayRez® 117 | Specialty Polymers | RayRez® 117 is a film forming acrylic emulsion polymer for graphic arts applications. It has high clarity, excellent gloss and ink transfer properties. RayRez® 117 can be used in high performance inks and overprint varnishes for plastic film and plastic b...voir plus RayRez® 117 is a film forming acrylic emulsion polymer for graphic arts applications. It has high clarity, excellent gloss and ink transfer properties. RayRez® 117 can be used in high performance inks and overprint varnishes for plastic film and plastic board. RayRez® 117 is suitable for formulation of inks in flexographic, gravure and roll coater applications. Also features outstanding water resistance, and excellent compatibility with different pigment color dispersions. voir moins | |
RayRez® 168A | Specialty Polymers | RayRez® 168A is a soft film forming acrylic emulsion polymer for graphic arts applications. It has excellent resolubility, great water resistance, excellent gloss, and outstanding ink transfer properties. RayRez® 168A can be used in high performance inks ...voir plus RayRez® 168A is a soft film forming acrylic emulsion polymer for graphic arts applications. It has excellent resolubility, great water resistance, excellent gloss, and outstanding ink transfer properties. RayRez® 168A can be used in high performance inks and over printing varnish for plastic film and plastic board. RayRez® 168A is suitable for formulation of inks in flexographic, gravure and roll coater applications. Other key features include excellent adhesion, and high transparence. voir moins | |
RayRez® 182A | Specialty Polymers | RayRez® 182A is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss and good ink transfer properties. RayRez® 182A can be used in high performance inks and over printing varnish for paper ...voir plus RayRez® 182A is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss and good ink transfer properties. RayRez® 182A can be used in high performance inks and over printing varnish for paper and corrugated board. RayRez® 182A is suitable for formulation of inks in flexographic, gravure and roll coater applications. Other key features include outstanding resolubility, and fast dry times while remaining cost effective. voir moins | |
RayRez® 182D | Specialty Polymers | RayRez® 182D is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss, outstanding pH stability, and ink transfer properties. RayRez® 182D can be used in high performance inks and over print...voir plus RayRez® 182D is non-film forming acrylic emulsion polymer designed for graphic arts applications. It has high clarity, excellent gloss, outstanding pH stability, and ink transfer properties. RayRez® 182D can be used in high performance inks and over printing varnish for paper and corrugated board. RayRez® 182D is suitable for formulation of inks in flexographic, gravure and roll coater applications. Other key features include outstanding resolubility, while remaining cost effective. voir moins | |
RayRez® 254 | Specialty Polymers | RayRez® 254 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has excellent rub resistance and ink transfer properties. RayRez® 254 can be used in regular inks for paper and corrugated board...voir plus RayRez® 254 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has excellent rub resistance and ink transfer properties. RayRez® 254 can be used in regular inks for paper and corrugated board especially for kraft paper and kraft paper board. RayRez® 254 is suitable for formulation of ink in flexographic, gravure and roll coater applications. Also features fast drying times. voir moins | |
RayRez® 256 | Specialty Polymers | RayRez® 256 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has outstanding rub resistance, excellent pH stability and ink transfer properties. RayRez® 256 can be used in regular inks for ...voir plus RayRez® 256 is a non-film forming, cost effective acrylic emulsion polymer with good opacity for graphic arts applications. It has outstanding rub resistance, excellent pH stability and ink transfer properties. RayRez® 256 can be used in regular inks for paper and corrugated board especially for kraft paper and kraft paper board. RayRez® 256 is suitable for formulation of ink in flexographic, gravure and roll coater applications. Other key features also include fast drying times, and good hiding power. voir moins | |
RAYREZ® 66 | Specialty Polymers, Inc. | RAYREZ® 66 is an anionic styrene acrylic emulsion that has resistant technology. This product is a coating that can adhere to several different materials and provides a gloss finish. RAYREZ® 66 is formulated to meet strict VOC requirements for industrial ...voir plus RAYREZ® 66 is an anionic styrene acrylic emulsion that has resistant technology. This product is a coating that can adhere to several different materials and provides a gloss finish. RAYREZ® 66 is formulated to meet strict VOC requirements for industrial coatings and has a low co-solvent demand. RAYREZ® 66 is primarily used to blend with water reducible alkyds to enhance coating performance and reduce VOC. RAYREZ® 66 provides resistance to chemical abrasion and scratches to surfaces that it is applied to. voir moins | |
RAYVACE® 331 | Specialty Polymers, Inc. | RAYVACE® 331 is a nonionic/anionic high solid, all-purpose vinyl acrylic emulsion copolymer. This product is intended for industrial and architecture applications. RAYVACE® 331 is mechanically stable and allows a high pigment formulated coatings. It is pr...voir plus RAYVACE® 331 is a nonionic/anionic high solid, all-purpose vinyl acrylic emulsion copolymer. This product is intended for industrial and architecture applications. RAYVACE® 331 is mechanically stable and allows a high pigment formulated coatings. It is primarily used to be applied in rapid drying times in industrial and architectural primer applications. voir moins | |
RHOPLEX 1785 | Univar Solutions | RHOPLEX 1785 is a high performance 55% solids acrylic latex binder designed for sealant compounds, provides excellent joint movement capability, adhesion and durability, with superior wet and dry adhesion properties. Sealant formulations cling tenaciously...voir plus RHOPLEX 1785 is a high performance 55% solids acrylic latex binder designed for sealant compounds, provides excellent joint movement capability, adhesion and durability, with superior wet and dry adhesion properties. Sealant formulations cling tenaciously to a wide variety of construction substrates including glass, steel, and concrete. In addition to excellent adhesion, the product provides excellent durability. This polymer is characterized by good water resistance and the unsurpassed ultraviolet stability associated with acrylic chemistry. In addition, a unique proprietary design gives the binder exceptional Aymar durability. Formulations based on this product can tolerate 25% joint movement without cracking or rupturing. voir moins | Request Sample |