| ACRIPOL T 112 | Chemipol | ACRIPOL T 112 is an anionic thickener based on an acrylamide polymer. Reverse emulsion. It shows a high activity and efficacy in acid drain cleaners. After having applied the thickener, the product maintains its transparency. Appropriate for being used as...voir plus ACRIPOL T 112 is an anionic thickener based on an acrylamide polymer. Reverse emulsion. It shows a high activity and efficacy in acid drain cleaners. After having applied the thickener, the product maintains its transparency. Appropriate for being used as a construction chemical additive. Once it is applied, the product is stable throughout a broad range of temperatures and salinity. It is completely stable in low pH values, between 2 and 5, being especially active in the range from 3 to 4. It can be added directly undiluted or after diluting it in water. voir moins | Request Sample |
| Bufloc® 590 | Buckman Laboratories, Inc. | Bufloc® 590 is a high-molecular weight cationic emulsion acrylamide polymer. It can be used in applications requiring a cationic polyelectrolyte, including influent and effluent clarification, sludge thickening, lime softening, and sludge dewatering. Bufl...voir plus Bufloc® 590 is a high-molecular weight cationic emulsion acrylamide polymer. It can be used in applications requiring a cationic polyelectrolyte, including influent and effluent clarification, sludge thickening, lime softening, and sludge dewatering. Bufloc® 590 is a water-in-oil emulsion that must be diluted with water before use. This product should be made down to a dilution of 0.2%–1.0% prior to feeding using a suitable polymer make-down system. Dilutions of polymers should be used within 24 hours of inversion. The recommended feedrate for Bufloc® 590 for clarification applications is 0.25–5.0 ppm. Sludge dewatering applications may require much higher dosages. voir moins | |
| N,N-Dimethyl acrylamide (DMAA) | Kowa American Corporation | N,N-Dimethylacrylamide (DMAA) offers glass and polycarbonate adhesion, increased hydrolytic stability, excellent optical properties, improved hydrolytic resistance in water soluble polymers and is a good viscosity modifier for hydrophilic formulations. DM...voir plus N,N-Dimethylacrylamide (DMAA) offers glass and polycarbonate adhesion, increased hydrolytic stability, excellent optical properties, improved hydrolytic resistance in water soluble polymers and is a good viscosity modifier for hydrophilic formulations. DMAA in oligomers improves adhesion, UV and impact resistance. Applications are adhesives, UV coatings, Inks, Optical Products and similar applications. voir moins | Request Sample |
| RHEOBYK-405 | BYK | RHEOBYK-405 is a liquid rheology additive for solvent-borne coating systems to increase the rheological effectiveness of pyrogenic fumed silica. Incorporation of the fumed silica is made easier, separation is prevented, and the thixotropic behavior increa...voir plus RHEOBYK-405 is a liquid rheology additive for solvent-borne coating systems to increase the rheological effectiveness of pyrogenic fumed silica. Incorporation of the fumed silica is made easier, separation is prevented, and the thixotropic behavior increased or stabilized. It acts as a wetting and dispersing additive and makes it easy to incorporate pyrogenic fumed silica in the coating. It increases or stabilizes the thixotropic behavior. The improved rheological effect is particularly noticeable in clear coatings as the incorporation of the fumed silica does not usually occur at the same high shear forces as for pigmented systems. voir moins | Request Sample |
| RHEOBYK-430 | BYK | RHEOBYK-430 is a liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties. | Request Sample |
| RHEOBYK-431 | BYK | RHEOBYK-431 is a liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties. With the aid of the pigments and fillers, the additive generates a three-dimensional network structure. The...voir plus RHEOBYK-431 is a liquid rheology additive for solvent-borne coatings, adhesives, and sealants to improve anti-sagging and anti-settling properties. With the aid of the pigments and fillers, the additive generates a three-dimensional network structure. The entanglement of the high molecular weight polymers is responsible for the development of the pseudoplastic flow behavior. The polarity of the system and the incorporation temperature influence the rheological effectiveness. The settling of the pigments and fillers is prevented and outstanding anti-sagging properties are produced due to the rapid rebound in viscosity after shearing. The additive has no "false body effect", no negative influence on the intercoat adhesion, and it is easy to process on account of its liquid form. voir moins | Request Sample |
| THIXATROL® Max | Elementis | THIXATROL® Max is a 100% active, solventborne, seed resistant organic rheological additive. THIXATROL® Max provides viscosity, thixotropy and sag control in both conventional and high build systems. | Request Sample |
| THIXATROL® PM 8058 | Elementis | THIXATROL® PM 8058 is a 100% active, seed resistant organic rheological additive. THIXATROL® PM 8058 provides high viscosity, thixotropy and thick layer sag control in high build systems that contain polar solvents. | Request Sample |
