| Nano Silver Powder TFNP-80 | Beijing Entrepreneur Science &Trading Co., Ltd. | Nano Silver Powder TFNP-80 is a moderate tap density, nanoscale spherical monodisperse silver. It is mainly used as an additive material. | |
| NANOBYK®-3620 | BYK | NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying p...voir plus NANOBYK®-3620 is a VOC-free, aqueous dispersion made up of nanohybrid particles to protect glossy, aqueous, pigmented and unpigmented top-coats against scratching and abrasion. This protective property comes into effect quickly after only a brief drying period. NANOBYK® 3620 has no negative influences on the gloss and transparency, and is therefore particularly suitable for clear coats. voir moins | |
| NANOPOL® C 750 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 750 shows very high performance in scratch- and abrasion-resistance without influencing the gloss or transparency of waterborne coatings. | Request Sample |
| NANOPOL® C 784 | Evonik Operations GmbH, BL Coating Additives | NANOPOL® C 784 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the coating. | Request Sample |
| NANOPOX® C 620 | Evonik Operations GmbH, BL Coating Additives | NANOPOX® C 620 shows the highest performance in scratch- and abrasion-resistance without influencing the gloss or transparency of the cured cationic UV-coating. | Request Sample |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Norub 9202B Green | The International Group, Inc. (IGI Wax) | Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. Thi...voir plus Norub 9202B Green is a water-based emulsion developed for application to liners of corrugated board to reduce its abrasive characteristics. The coating is most effective when applied at a rate of 10 - 15 g/m2 or 2 - 3 lbs per MSF in a continuous film. This product is an ideal non-scuff coating which can be used for packaging office furniture, filing cabinets, household goods, and most speciality metal products - wherever non-abrasiveness is required. voir moins | |
| NpAg_925 | TNS Solutions Ltda | NpAg_925 is a one-component antimicrobial product that, like the entire TNS product line, is customized to the customer's demand and production process. It is an aqueous colloidal dispersion of silver nanoparticles stabilized with organic molecules that g...voir plus NpAg_925 is a one-component antimicrobial product that, like the entire TNS product line, is customized to the customer's demand and production process. It is an aqueous colloidal dispersion of silver nanoparticles stabilized with organic molecules that guarantee a safe and efficient application, inhibiting the growth of microorganisms. voir moins | |
| NpAg_925-AgZn | TNS Solutions Ltda | NpAg_925-AgZn is an inorganic compound with antibacterial and antifungal function which, like the whole range of TNS products, is customized according to the customer's demand and production process. The product is developed with zinc compounds and silver...voir plus NpAg_925-AgZn is an inorganic compound with antibacterial and antifungal function which, like the whole range of TNS products, is customized according to the customer's demand and production process. The product is developed with zinc compounds and silver nanoparticles and is resistant to high temperature variations. The additive was intended for the purpose of inhibiting the growth and proliferation of pathogenic microorganisms in the products in which it is applied. voir moins | |
| NpAg_925-ETG | TNS Solutions Ltda | NpAg_925-ETG is a colloidal suspension of silver nanoparticles in alcohol, which gives the applied product antimicrobial characteristic. Like the entire TNS line, it is customized according to customer demand and production process. This additive ensures ...voir plus NpAg_925-ETG is a colloidal suspension of silver nanoparticles in alcohol, which gives the applied product antimicrobial characteristic. Like the entire TNS line, it is customized according to customer demand and production process. This additive ensures a safe and efficient application for the elimination of microorganisms from the use of nanotechnology. voir moins | |
| NUOSPERSE® 15 | Elementis | NUOSPERSE® 15 is a multifunctional pigment dispersing additive/vehicle that has been developed for high performance solventborne coatings. | |
| NUOSPERSE® 2000 | Elementis | NUOSPERSE® 2000 is a waterborne liquid carrier/humectant for use in VOC- compliant colorants and pigment dispersions. | |
| NUOSPERSE® 2006 | Elementis | NUOSPERSE® 2006 is an organic-solvent free, anionic, waterborne surface active compound which can be used as a wetting agent in aqueous as well as organic- solvent borne systems. It has excellent substrate wetting properties. | |
| NUOSPERSE® 2008 | Elementis | NUOSPERSE® 2008 is a unique solvent free/NO- VOC waterborne/solventborne pigment dispersing agent specifically used in NO-VOC paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueous as...voir plus NUOSPERSE® 2008 is a unique solvent free/NO- VOC waterborne/solventborne pigment dispersing agent specifically used in NO-VOC paints and pigment concentrates. The product is a liquid polymeric multi-functional surfactant and may be used in both aqueous as well as organic solvent based coatings and inks. voir moins | |
| NUOSPERSE® 657 NA | Elementis | NUOSPERSE® 657 NA is a highly effective in various types of organic and inorganic pigments. It is recommended for use in a wide range of high- performance, solvent-borne coatings. The product can also be used in vinyl applications. | |
| NUOSPERSE® 9100 | Elementis | NUOSPERSE® 9100 is a powder solventborne dispersing agent designed for high solids and UV systems. It is soluble in a wide variety of solvents, monomers, reactive diluents and compatible with most non-aqueous systems. It can be used as the sole dispersing...voir plus NUOSPERSE® 9100 is a powder solventborne dispersing agent designed for high solids and UV systems. It is soluble in a wide variety of solvents, monomers, reactive diluents and compatible with most non-aqueous systems. It can be used as the sole dispersing resin to prepare highly concentrated dispersions of both organic and inorganic pigments. voir moins | |
| NUOSPERSE® FA 115 | Elementis | NUOSPERSE® FA 115 is a waterborne additive to improve the incorporation of universal tinting pastes into the base dispersion paint. | |
| NUOSPERSE® FA 182 | Elementis | NUOSPERSE® FA 182 is an anionic waterborne/solventborne surface active compound which can be used as a wetting agent in dispersion paints. The product also reduces the resistance of electrostatic spray paints. | |
| NUOSPERSE® FA 196 | Elementis | NUOSPERSE® FA 196 is a highly concentrated liquid pigment waterborne/solventborne/colorant dispersing agent for application in organic solvent-borne systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for carbon blac...voir plus NUOSPERSE® FA 196 is a highly concentrated liquid pigment waterborne/solventborne/colorant dispersing agent for application in organic solvent-borne systems. NUOSPERSE® FA 196 is especially recommended for application as a dispersing agent for carbon black, for thermoplastic acrylic systems and as an auxiliary product to improve the action of universal tinting pastes in basic alkyd paints. voir moins | |
| NUOSPERSE® FK 329 | Elementis | NUOSPERSE® FK 329 is a liquid solventborne corrosion inhibitor for non-aqueous systems. This product is also recommended as a cationic pigment dispersant. | |
| NUOSPERSE FN® 1566 | Elementis | NUOSPERSE FN® 1566 is a nonyl phenol ethoxylate waterborne surfactant. In general these ethoxylated compounds are resistant to acids and alkali, as well as weak oxidation and reduction agents. They are also totally compatible with both anionic and cationi...voir plus NUOSPERSE FN® 1566 is a nonyl phenol ethoxylate waterborne surfactant. In general these ethoxylated compounds are resistant to acids and alkali, as well as weak oxidation and reduction agents. They are also totally compatible with both anionic and cationic compounds. voir moins | |
| NUOSPERSE® FN 211 | Elementis | NUOSPERSE® FN 211 is a nonionic pigment wetting and dispersing agent primarily for use in waterborne coating formulations. This product is alkyl phenol ethoxylate-free and replaces traditionally used nonionic surfactants. | |
| NUOSPERSE® FN 260 | Elementis | NUOSPERSE® FN 260 is a unique, waterborne, labelling-free nonionic wetting agent and emulsifier. | |
| NUOSPERSE® FN 265 | Elementis | NUOSPERSE® FN 265 is an alkylphenol-free, nonionic waterborne wetting agent and emulsifier. | |
| NUOSPERSE® FX 365 | Elementis | NUOSPERSE® FX 365 is a nonionic polymeric wetting and dispersing agent for use in waterborne coating and ink formulations and pigment pastes. This product shows outstanding pigment wetting and stabilizing properties. | |
| NUOSPERSE® FX 504 | Elementis | NUOSPERSE® FX 504 is a low-foaming, polymeric waterborne pigment dispersing agent that works effectively for many hydrophilic pigments and extenders that are used in aqueous coatings. | |
| NUOSPERSE® FX 600 | Elementis | NUOSPERSE® FX 600 is a highly effective pigment dispersing agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polymer and is free of or...voir plus NUOSPERSE® FX 600 is a highly effective pigment dispersing agent for use in waterborne industrial coatings, protective coatings, gloss dispersion paints, colorants and also printing inks. The product is a liquid, multi-functional polymer and is free of organic solvents. voir moins | |
| NUOSPERSE® FX 605 | Elementis | NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even af...voir plus NUOSPERSE® FX 605 is a low-foaming pigment dispersing agent for waterborne systems. It counter-acts pigment flocculation in weak acid, neutral and strongly alkaline media. The product is also stable against hydrolysis and thus retains its activity even after extended storage of the coating system. voir moins | |
| NUOSPERSE® W-22 | Elementis | NUOSPERSE® W-22 is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent flocculation and viscosity drift. | |
| NUOSPERSE® W-28 | Elementis | NUOSPERSE® W-28 is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent flocculation and viscosity drift. | |
| NUOSPERSE® W-30 | Elementis | NUOSPERSE® W-30 is an environmentally friendly waterborne dispersing agent that can be used with all types of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in water...voir plus NUOSPERSE® W-30 is an environmentally friendly waterborne dispersing agent that can be used with all types of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent re-flocculation and viscosity drift. voir moins | |
| NUOSPERSE® W-33 | Elementis | NUOSPERSE® W-33 is a dispersing agent that can be used with a variety of pigments to help provide full colour development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the f...voir plus NUOSPERSE® W-33 is a dispersing agent that can be used with a variety of pigments to help provide full colour development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent reflocculation and viscosity drift. NUOSPERSE® W-33 is low VOC and free of Alkylphenolethoxylates. voir moins | |
| NUOSPERSE® W-39 | Elementis | NUOSPERSE® W-39 is an environmentally friendly waterborne/colorant dispersing agent that can be used with a variety of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments...voir plus NUOSPERSE® W-39 is an environmentally friendly waterborne/colorant dispersing agent that can be used with a variety of pigments to help provide full color development and maximum production output. It is highly effective in wetting and dispersing pigments in waterborne systems, and stabilizing the finished dispersion to prevent re-flocculation and viscosity drift. voir moins | |
| NUOSPERSE® XL-1/80 | Elementis | NUOSPERSE® XL-1/80 is solventborne/colorant, and is designed for use in manufacturing of glycol-free universal colorants for in-plant and machine tinting. This product is also used as an additive to improve compatibility of colorant/paint systems. | |
| NUTRISTIM® PURE AH | DuPont Nutrition & Biosciences | NUTRISTIM® PURE AH is a highly purified anhydrous betaine product derived from non-GM sugar beets. It is intended for use in a wide range of industrial applications and it is highly suited for use in inkjet printing inks. This product functions as a hume...voir plus NUTRISTIM® PURE AH is a highly purified anhydrous betaine product derived from non-GM sugar beets. It is intended for use in a wide range of industrial applications and it is highly suited for use in inkjet printing inks. This product functions as a humectant and it is highly effective for prevention of moisture loss. When combined with other ink ingredients and components, NUTRISTIM® PURE AH may provide the following benefits: improved ink stability, improved recovery of inkjet printing systems after idle periods, improved water-fastness, reduced feathering of images, and reduced show-through. voir moins | |
| Octosol A-18 | Tiarco Chemical | Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, a...voir plus Octosol A-18 is an opalescent aqueous dispersion of disodium n-octadecylsulfosuccinamate, in the form of an off-white to cream-colored paste. Stable in acid and alkaline aqueous systems, this surfactant has many successful uses: emulsifying, dispersing, and foaming. It is used as a textile-softening agent, as a suspending agent in emulsion polymerization, as a foaming agent in latex compounds, and in cleaning and penetrating formulations. voir moins | |
| Octowet 70 | Tiarco Chemical | Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...voir plus Octowet 70 is an anionic surfactant (70% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. voir moins | |
| Octowet 70D | Tiarco Chemical | Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely use...voir plus Octowet 70D is an anionic surfactant solution (DOSS) in water, and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. voir moins | |
| Octowet 70MS | Tiarco Chemical | Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...voir plus Octowet 70MS is an anionic surfactant, 70% DOSS in mineral spirits. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. voir moins | |
| Octowet 70PG | Tiarco Chemical | Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...voir plus Octowet 70PG is a 70% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. Additionally, Octowet 70PG is formulated so as to provide the surfactant in a non-flammable aqueous form. voir moins | |
| Octowet 70X | Tiarco Chemical | Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...voir plus Octowet 70X is an anionic surfactant (70% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. voir moins | |
| Octowet 75 | Tiarco Chemical | Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a ...voir plus Octowet 75 is an anionic surfactant (75% DOSS) in water and glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. voir moins | |
| Octowet 75PG | Tiarco Chemical | Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a p...voir plus Octowet 75PG is a 75% DOSS solution in water and propylene glycol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. voir moins | |
| Octowet 75X | Tiarco Chemical | Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as ...voir plus Octowet 75X is an anionic surfactant (75% DOSS) in water and ethanol. It is very effective at low concentrations for applications as a high-speed wetting agent in dyeing and washing operations for the textile industry. This product is also widely used as a penetrant and emulsifier for many textile applications in the areas of preparation, dyeing, and finishing. voir moins | |
| Opalion Defoamer | Opalion | Opalion Defoamer is of the latest technology and is characterized by high efficiency and being very effective at low dosage levels. It is from silicone and it is not affected by high temperatures and pH range. It's applications are very broad, making it u...voir plus Opalion Defoamer is of the latest technology and is characterized by high efficiency and being very effective at low dosage levels. It is from silicone and it is not affected by high temperatures and pH range. It's applications are very broad, making it unlike older based defoamers stearates. It has a pleasant smell and has very low toxicity. voir moins | |
| Opaque dispersion 1090 | Opalion | Opaque dispersion 1090 is a breakthrough in paint formulation as titanium dioxide can reduce the advantage of having low density paintings. Unfortunately, the high cost of acrylic monomers has continued to thrive. Furthermore titanium dioxide has remaine...voir plus Opaque dispersion 1090 is a breakthrough in paint formulation as titanium dioxide can reduce the advantage of having low density paintings. Unfortunately, the high cost of acrylic monomers has continued to thrive. Furthermore titanium dioxide has remained in steady price. After years of research, 1090 opaque dispersion was developed to now compete on price in the areas of interior and exterior paints, but not in roofs where greater flexibility is needed. 1090 opaque dispersion has a perfect balance between its covering and binding power. This allows a direct change of the dispersion use increasing by keeping the other properties. voir moins | |
| OPTIGEL® WX | BYK | OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral a...voir plus OPTIGEL® WX, a specially selected and activated smectite product, has a high swelling capacity in water and shows a marked thixotropic thickening effect. This product is stable in diluted acids and bases and is particularly effective in acidic, neutral and alkaline systems. This product has applications in emulsion paints, release coatings, silicate paints, paint strippers, water reducible paints, liquid cleaners, inks, grinding pastes and abrasives, and car undercoatings. voir moins | |
| Optilith™ 1486 A | Lawter | Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optil...voir plus Optilith™ 1486 A is an anti-oxidant additive with a low viscosity solution that acts to minimize the effect on drying time, while maximizing the "stay open" time. It also has anti-skinning properties and is pumpable for easy transfer and dispersion. Optilith™ 1486 A is recommended for use in heatset offset and sheet-fed offset inks. voir moins | |
| Optilith™ 3094 A | Lawter | Optilith™ 3094 A is an anti-oxidant solution developed for heatset inks where skin formation in the inks would be harmful because of the potential contamination of delivery pipes and ink pumps that feed the ink fountains at the press. The product is usefu...voir plus Optilith™ 3094 A is an anti-oxidant solution developed for heatset inks where skin formation in the inks would be harmful because of the potential contamination of delivery pipes and ink pumps that feed the ink fountains at the press. The product is useful in heatset inks where metallic driers might be needed to attain the necessary squalene resistance. Apart from uses in heatset inks, Optilith™ 3094 A can be used in sheet-fed inks, although at lower levels. voir moins | |
| Optilith™ 4 A | Lawter | Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for ...voir plus Optilith™ 4 A is a water-fighting additive that has a low volatile and high solids lubricating compound. It is able to reduce water pick-up in lithographic inks and is functional across a variety of fountain solutions. Optilith™ 4 A is ideally suited for use in heatset and sheet-fed offset inks and in flushing vehicles. voir moins | |
| Optilith™ AM A | Lawter | Optilith™ AM A is an anti-mist compound that is 95% non-volatile and in the form of a high solids paste. It offers maximum reduction in misting without any bad effect on ink rheology or gloss. Optilith™ AM A is suitable for use in heatset offset, sheet-fe...voir plus Optilith™ AM A is an anti-mist compound that is 95% non-volatile and in the form of a high solids paste. It offers maximum reduction in misting without any bad effect on ink rheology or gloss. Optilith™ AM A is suitable for use in heatset offset, sheet-fed offset inks and in metal deco and OPV applications. voir moins | |
| Optilith™ TRG A | Lawter | Optilith™ TRG A is a non-volatile gelled tack reducer that decreases the initial tack without "destroying" the rheological properties of ink. It also flattens the tack curve providing better transfer and tack stability. Optilith™ TRG A is suitable for use...voir plus Optilith™ TRG A is a non-volatile gelled tack reducer that decreases the initial tack without "destroying" the rheological properties of ink. It also flattens the tack curve providing better transfer and tack stability. Optilith™ TRG A is suitable for use in all oil-based offset inks including sheet-fed, heatset and web no-heat applications. voir moins | |
| OptiXan™ 40 | ADM | OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology contro...voir plus OptiXan™ 40 is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor, and a mesh size of 40. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. voir moins | |
| OptiXan™ Dispersible | ADM | OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such ...voir plus OptiXan™ Dispersible is an emulsifier and thickener in the form of a cream to tan colored, free-flowing powder or granules with a characteristic odor. This product is intended for use in non-food applications as thickener and rheology control agent, such as in paints, printing inks, and coatings. voir moins | |
| P-Toluene Sulfonamide (OPTSA) | Hainan Zhongxin Chemical Co., Ltd. | P-Toluene Sulfonamide (OPTSA) is a white crystalline powder that is 99.5% pure. It is primarily used as a flame retardant additive for paints, inks and plastics. P-Toluene Sulfonamide (OPTSA) can be use as a plasticizer in the production of fluorescent, p...voir plus P-Toluene Sulfonamide (OPTSA) is a white crystalline powder that is 99.5% pure. It is primarily used as a flame retardant additive for paints, inks and plastics. P-Toluene Sulfonamide (OPTSA) can be use as a plasticizer in the production of fluorescent, phenolic and polyamide resins. voir moins | |
| P-Toluene Sulfonyl Chloride (OPTSC) | Hainan Zhongxin Chemical Co., Ltd. | P-Toluene Sulfonyl Chloride (OPTSC) is a white crystalline powder that is 99% pure. It is mainly used as an analytical reagent and can be used as a flame retardant additive in paints and plastic. In addition, P-Toluene Sulfonyl Chloride (OPTSC) can also b...voir plus P-Toluene Sulfonyl Chloride (OPTSC) is a white crystalline powder that is 99% pure. It is mainly used as an analytical reagent and can be used as a flame retardant additive in paints and plastic. In addition, P-Toluene Sulfonyl Chloride (OPTSC) can also be used in synthesizing organics, hormones, and various dyes. voir moins | |
| Pale Grinders | ADM | Pale Grinders, in the form of amber clear liquid, is linseed oil with linseed fatty acids, high acidity, good wetting properties, and light in color. It has many applications, such as varnishes, paints, alkyd resins, hardboard, inks, coatings, and more. | |
| Pangel B10 | Tolsa, S.A. | Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatin...voir plus Pangel B10 is a powdered additive with high thickening and anti-settling capacity for medium-low polarity systems. It offers thixotropic, suspension, and sagging resistance properties based on White Spirit type solvents. It can be used in paints, coatings, printing inks, drilling mud, greases, sealants and joints, asphalt coatings, putties, rubber, gel-coat, and emulsions. voir moins | |
| Pangel B20 | Tolsa, S.A. | Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvent...voir plus Pangel B20 is a powdered additive with high thickening and anti-setting capacity for intermediate polarity systems. It provides thixotropic, suspension, and sagging resistance properties to systems based on aromatic and unsaturated polyester type solvents. It can be used in paints, coatings, printing inks, unsaturated polyester putties, paint strippers, greases, asphalt coatings, sealants and joints, plastisol and rubber, emulsions, gel-coats, and nail varnish,. voir moins | |
| Pangel B40 | Tolsa, S.A. | Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropi...voir plus Pangel B40 is a powdered additive with high thickening and anti-settling capacity for high polarity systems, particularly those based on alcohol, glycol, or ketone type solvents, or in mixtures of those with water. It is recommended to provide thixotropic, suspension, and sagging-resistance properties. It can be used in coatings, paints, printing inks, paint strippers, sealants and joints, vinyl plastisol, gel-coat, nail varnish, wash coat alcohols, glycols, and esters. voir moins | |
| Pangel OM8 | Tolsa, S.A. | Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosi...voir plus Pangel OM8 is a rheological additive for low to medium polarity systems made from purified bentonite clay. It is recommended for systems based on resins such as polyurethanes, acrylics, polyester, epoxy esters, and alkyds. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, bituminous undercoats, varnishes, and inks. voir moins | |
| Pangel OMD1 | Tolsa, S.A. | Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control...voir plus Pangel OMD1 is a self-dispersing rheological additive for medium to low polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, polyester coatings, primers, industrial finishes, road marking paints, varnishes, lubricating greases, and bituminous undercoats. voir moins | |
| Pangel OMD2 | Tolsa, S.A. | Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, an...voir plus Pangel OMD2 is a rheological additive for medium to high polarity systems made from purified bentonite clay. It is recommended for providing solvent-borne systems with properties including thixotropic and pseudoplastic effects, sag control, levelling, and pigment settling prevention. It can be used in anti-corrosive paints, adhesives, industrial finishes, maintenance coatings, epoxy based coatings, and paint removers. voir moins | |
| PARAFFLEX® 4625A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4625A is a specialty formulation of petroleum waxes suitable for the manufacture of scented pillar, votive and other molded candles. | |
| PARAFFLEX® 4630A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles. | |
| PARAFFLEX® 4797A | The International Group, Inc. (IGI Wax) | PARAFFLEX® 4797A is a premium grade cascading wax for treatment of corrugated paperboard. | |
| PC 1644™ Defoamer | Allnex | PC-1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC-1244® in non-aqueous organic fluids. PC-1644™ is a general purpose defoamer which offers superior foam co...voir plus PC-1644™ Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It was developed to offer improved defoaming performance versus PC-1244® in non-aqueous organic fluids. PC-1644™ is a general purpose defoamer which offers superior foam control at low use levels, generally 10 to 20 % lower use level versus PC-1244®. PC-1644™ is silicone-free and exhibits very low odor. voir moins | Request Sample |
| PC-1244™ Defoamer | Allnex | PC-1244® Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has d...voir plus PC-1244® Defoamer is a solution of organic polymer in a petroleum solvent. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1244® contains no silicone. PC-1244® Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine and transmission oils. voir moins | Request Sample |
| PC-1344™ Defoamer | Allnex | PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an abili...voir plus PC-1344™ Defoamer is a highly viscous organic polymer. It enhances air release properties and prevents foam formation in acidic or neutral organic fluids at temperatures up to 400 °F. It also performs in some alkaline systems. It has demonstrated an ability to retain its defoaming capacity over extended periods of time. It works without materially affecting the surface tension of the media. PC-1344™ contains no silicone. PC-1344™ Defoamer applications include usage in gear oils, specialty lubricants, and hydraulic, turbine, or transmission oils. voir moins | Request Sample |
| PC-1844™ Defoamer | Allnex | PC-1844® Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844® is recommended for high performance usage where PC-1244®, PC-1644®, or silicone defoame...voir plus PC-1844® Defoamer is a 40 % solution of an acrylic polymer in a petroleum solvent. It provides improved high temperature performance, and improved efficiency. PC-1844® is recommended for high performance usage where PC-1244®, PC-1644®, or silicone defoamers do not give adequate performance. These usages include gear oils, specialty lubricants, shock absorber, hydraulic, turbine and transmission oils. voir moins | Request Sample |
| PC-2544™ Defoamer | Allnex | PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty appl...voir plus PC 2544™ Defoamer is a 40 % solution of an acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated Group I and Group II lubricants. PC 2544™ is also suggested for evaluation in specialty applications where efficient high temperature performance is required. voir moins | Request Sample |
| PC-3144® Defoamer | Allnex | PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB...voir plus PC-3144® Defoamer is a 40 % solution of a modified acrylic polymer in a hydrocarbon solvent. It was developed to improve the defoamer stability performance for formulated synthetic and mineral based lubricants. It is especially recommended for PAO and PIB based synthetic lubricants, as well as the formulations containing these components, where conventional polyacrylate based defoamers do not work or do not work well. voir moins | Request Sample |
| PC-4144-DEFOAMER | Allnex | PC-4144 is a highly efficient defoamer for metal working fluids and metal working fluid emulsions with very low VOC content ( Active substance approx. 100 % \r\n\r\n. | Request Sample |
| PEO-1 | Sumitomo Seika Chemicals Co., Ltd. | PEO-1 is a nonionic water-soluble thermoplastic polymer. PEO-1 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-2 | Sumitomo Seika Chemicals Co., Ltd. | PEO-2 is a nonionic water-soluble thermoplastic polymer. PEO-2 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-3 | Sumitomo Seika Chemicals Co., Ltd. | PEO-3 is a nonionic water-soluble thermoplastic polymer. PEO-3 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-4 | Sumitomo Seika Chemicals Co., Ltd. | PEO-4 is a nonionic water-soluble thermoplastic polymer. PEO-4 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PEO-8 | Sumitomo Seika Chemicals Co., Ltd. | PEO-8 is a nonionic water-soluble thermoplastic polymer. PEO-8 is mainly used as a rheology control, viscosity control and texture modifier. This product is nonionic and thermoplastic, it can be used in many applications. | |
| PETAX® 0310A | The International Group, Inc. (IGI Wax) | PETAX® 0310A is a cream white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0310A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0320A | The International Group, Inc. (IGI Wax) | PETAX® 0320A is a cream white, odorless petrolatum with a soft consistency and medium fiber length. PETAX® 0320A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETAX® 0386A | The International Group, Inc. (IGI Wax) | PETAX® 0386A is a white, odorless petrolatum of medium consistency (hardness) and fiber length. PETAX® 0386A complies with the requirements for “White Petrolatum” set by the United States Pharmacopeia (USP). | |
| PETROFIBE® 0201A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0201A is a dark brown industrial grade petrolatum of medium-hard consistency. PETROFIBE® 0201A finds economical use in applications not requiring the more expensive USP or NF grades. | |
| PETROFIBE® 0251A | The International Group, Inc. (IGI Wax) | PETROFIBE® 0251A is a mixture of soft petroleum waxes. | |
| PIB 10 | Braskem S.A. | PIB 10 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 10 is a non-toxic polymer. | |
| PIB 122 | Braskem S.A. | PIB 122 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 122 is a non-toxic polymer. | |
| PIB 128 | Braskem S.A. | PIB 128 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 128 is a non-toxic polymer. | |
| PIB 16 | Braskem S.A. | PIB 16 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. | |
| PIB 24 | Braskem S.A. | PIB 24 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 24 is a non-toxic polymer. | |
| PIB 240 | Braskem S.A. | PIB 240 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 240 is a non-toxic polymer. | |
| PIB 30 | Braskem S.A. | PIB 30 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 30 is a non-toxic polymer. | |
| PIB 32 | Braskem S.A. | PIB 32 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 32 is a non-toxic polymer. | |
| PIB 4 | Braskem S.A. | PIB 4 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 4 is a non-toxic polymer. | |
| PIB 6 | Braskem S.A. | PIB 6 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 6 is a non-toxic polymer. | |
| PIB 8 | Braskem S.A. | PIB 8 is obtained by polymerization of an isobutene rich stream with specific catalysts. Product is composed predominantly of aliphatic mono-olefins. PIB 8 is a non-toxic polymer. | |
| Plastiopal Eco | Opalion | Plastiopal Eco dop can replace a large number of uses without toxicity since it is of vegetable origin. Phthalates are suspected to cause certain diseases in man, although opinions are divided. Therefore replacement dop has been the chemical target this t...voir plus Plastiopal Eco dop can replace a large number of uses without toxicity since it is of vegetable origin. Phthalates are suspected to cause certain diseases in man, although opinions are divided. Therefore replacement dop has been the chemical target this time. It is for use in plastic sheeting plasticizer, plastisols, paints, leather, paints, varnishes, etc. voir moins | |
| Polyether Modified Siloxane FD-408 | Zhejiang Feidian Chemical Co., Ltd. | FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wett...voir plus FD-408 is a polyether modified siloxane with low surface tension and good permeability. Due to its excellent spreading and permeability, it can be used as a substrate wetting agent for coatings and water-based inks. This product can also be used as a wetting agent and leveling agent for water-based polyurethanes. voir moins | |
| Polysperse™ A | Lawter | Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resista...voir plus Polysperse™ A is a micronized synthetic wax with a narrow distribution of particles and spherical morphology that allows for an easier uniformity and dispersion during processing. It shows good surface slip and smoothness, low surface tension, rub resistance and gloss. Polysperse™ A is suitable for use in flexographic and gravure inks, heatset and sheet-fed inks and in UV and metal decorating inks. voir moins | |
| POST® 4 | Elementis | POST® 4 is a castor based solventborne additive designed to be added to the let-down of a paint to boost viscosity and sag resistance. It is primarily designed for non-aqueous aliphatic coatings systems. The ability to be post added, allows this product t...voir plus POST® 4 is a castor based solventborne additive designed to be added to the let-down of a paint to boost viscosity and sag resistance. It is primarily designed for non-aqueous aliphatic coatings systems. The ability to be post added, allows this product to be used as a post corrective agent for addition to finished batches of paint in need of flow correction and/or pigment suspension enhancement. voir moins | |
| Precipitated Silica | Beijing Entrepreneur Science &Trading Co., Ltd. | Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixi...voir plus Precipitated silica is a relatively pure form of the mineral silica, which is produced by the chemical process known as precipitation. In chemical precipitation, a solid forms from a liquid due to a chemical reaction. Precipitated silica is formed by mixing solutions of sodium silicate with sulfuric acid in water. A chemical reaction occurs, and pellets of pure silica form. voir moins | |
| Propyl Gallate | Derbiotec | Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant...voir plus Propyl Gallate is made from Natural Gallic Acid, which is obtained by hydrolisis of Tanins from Tara pod / Caesalpinia spinosa. It’s a white to creamy – white crystalline, odorless solid, with slightly bitter taste. Propyl Gallate is a natural antioxidant. It can be used in the Food industry to avoid the oxidation of oils and fats. As an additive, it may be found in edible fats, oils, mayonnaise, fresh pork sausage, dried meat, shortening, baked goods, candy and dried milk. Also it is used in hair grooming products. voir moins |
