Cimpact® 699 | Imerys Performance Additives | Cimpact® 699 is a high brightness, platy talc recommended for extruded and molded rubber goods to improve modulus and tensile strength. | |
FINNTALC M30 | Elementis | FINNTALC M30 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product s...voir plus FINNTALC M30 is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. voir moins | |
FINNTALC M30LV | Elementis | FINNTALC M30LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product...voir plus FINNTALC M30LV is a hydrated magnesium silicate with chemical formula of Mg3Si4O10(OH)2. Finntalc grades are purified in a cascade of multiple flotation cells. This process results in a tight definition of the talc composition, making this natural product similar to a synthetic chemical. In combination with a precisely controlled particle size distribution, this ensures exact reproducibility in formulations. voir moins | |
Jetfil® P200 | Imerys Performance Additives | Jetfil® P200 is a high purity, platy talc used in polyolefins to increase stiffness and raise heat deflection temperature (HDT). | |
Jetfil® P500 | Imerys Performance Additives | Jetfil® P500 is a high purity, platy talc used in polyolefins to increase stiffness and raise heat deflection temperature (HDT). | |
Jetfine® 1H | Imerys Performance Additives | Jetfine® 1H is an ultra-fine, micronized talc which significantly increases hiding power. Jetfine® 1H has a top cut of 5μm and a median particle size of 1μm. | |
MICROTALC ® 50-26 | Specialty Minerals | MICROTALC® 50-26 is a general purpose talc product which has a median particle size of 8 microns. This product has a pH value of 8.8 and a density of 2.8. MICROTALC® 50-26 is used in sealants, caulks, joint compounds, spackles, and texture coats. | |
MICROTALC ® 70-22 | Specialty Minerals | MICROTALC ® 70-22 is a general purpose talc product which has a median particle size of 7 microns. This product has a dry brightness or between 76 and 85 and a bulk density of 27 pounds/ft2. MICROTALC ® 70-22 is used in sealants, caulks, joint compounds, ...voir plus MICROTALC ® 70-22 is a general purpose talc product which has a median particle size of 7 microns. This product has a dry brightness or between 76 and 85 and a bulk density of 27 pounds/ft2. MICROTALC ® 70-22 is used in sealants, caulks, joint compounds, spackles, and texture coats. voir moins | |
Mistron® 554 | Imerys Performance Additives | Mistron® 554 is a platy, high purity talc that improves barrier properties, corrosion resistance and stain blocking ability in architectural and industrial primers. | |
Mistron® Monomix | Imerys Performance Additives | Mistron® Monomix is a platy, high purity talc that improves barrier properties, corrosion resistance and stain blocking ability in architectural and industrial primers. | |
Mistron® Monomix G | Imerys Performance Additives | Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers...voir plus Mistron® Monomix G is a fine high brightness talc used for pigment extension, gloss adjustment, rheology control, sandability, barrier effect, corrosion resistance and stain-blocking in industrial primers, topcoats, inks, wood coatings, automotive primers, decorative paints, colorants, gel coats and varnishes. voir moins | |
Mistron® Ultramix | Imerys Performance Additives | Mistron® Ultramix is a platy, high purity talc used in interior and exterior coating, adhesive and sealant formulations. | |
Mistron® Vapor RE | Imerys Performance Additives | Mistron® Vapor RE is a platy, high purity talc used in thermoset rubber, coating, adhesive and sealant formulations. It is acid insoluble and non-abrasive to compounding, extrusion and paint application equipment. | |
Nicron® 403 | Imerys Performance Additives | Nicron® 403 is a platy, high purity talc that enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. | |
Nicron® 503 | Imerys Performance Additives | Nicron® 503 is a platy, high purity talc used in high solids/low VOC coating and adhesive applications which require low viscosity build extenders. | |
Nicron® 674 | Imerys Performance Additives | Nicron® 674 is a platy, ultra fine, high purity talc that is insoluble in mineral acids, hydrophobic and non-abrasive to compounding and application equipment. Used in interior/exterior coatings, adhesives, sealants and thermoplastic polymers. | |
SERICRON® 2M | Specialty Minerals | SERICRON® 2M is a talc product which has a high chemical resistance. This product has an oil absorption of 22 and a bulking value of 23.3. SERICRON® 2M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
SERICRON® 3M | Specialty Minerals | SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and ...voir plus SERICRON® 3M is a talc product which has a high chemical resistance. This product has an oil absorption of 24 and a median particle size of 8 microns. SERICRON® 3M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. voir moins | |
SERICRON® 4M | Specialty Minerals | SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and ...voir plus SERICRON® 4M is a talc product which has a high chemical resistance. This product has an oil absorption of 30 and a median particle size of 4 microns. SERICRON® 4M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. voir moins | |
SERICRON® 5M | Specialty Minerals | SERICRON® 5M is a talc product which has a high chemical resistance. This product has an oil absorption of 36 and a density of 2.8. SERICRON® 5M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
SERICRON® 6M | Specialty Minerals | SERICRON® 6M is a talc product which has a high chemical resistance. This product has an oil absorption of 39 and a pH value of 8.8. SERICRON® 6M is used in construction products such as joint compound, adhesives, sealants, putties, and caulks. | |
Silverline® 403 | Imerys Performance Additives | Silverline® 403 is a platy, high purity talc that enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. | |
TALCRON® MP 10-52 | Specialty Minerals | TALCRON® MP 10-52 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1 micron and an oil absorption of 55. TALCRON® MP 10-52 is used in paint, coatings, adhesives, and sea...voir plus TALCRON® MP 10-52 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1 micron and an oil absorption of 55. TALCRON® MP 10-52 is used in paint, coatings, adhesives, and sealants. voir moins | |
TALCRON® MP 12-50 | Specialty Minerals | TALCRON® MP 12-50 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1.2 microns and an oil absorption of 53. TALCRON® MP 12-50 is used in paint, coatings, adhesives, and ...voir plus TALCRON® MP 12-50 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 1.2 microns and an oil absorption of 53. TALCRON® MP 12-50 is used in paint, coatings, adhesives, and sealants. voir moins | |
TALCRON® MP 15-38 | Specialty Minerals | TALCRON® MP 15-38 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 2 microns and an oil absorption of 42. TALCRON® MP 15-38 is used in paint, coatings, adhesives, and se...voir plus TALCRON® MP 15-38 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 2 microns and an oil absorption of 42. TALCRON® MP 15-38 is used in paint, coatings, adhesives, and sealants. voir moins | |
TALCRON® MP 30-36 | Specialty Minerals | TALCRON® MP 30-36 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 3 microns and an oil absorption of 34. TALCRON® MP 30-36 is used in paint, coatings, adhesives, and se...voir plus TALCRON® MP 30-36 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 3 microns and an oil absorption of 34. TALCRON® MP 30-36 is used in paint, coatings, adhesives, and sealants. voir moins | |
TALCRON® MP 40-27 | Specialty Minerals | TALCRON® MP 40-27 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 4 microns and an oil absorption of 30. TALCRON® MP 40-27 is used in paint, coatings, adhesives, and se...voir plus TALCRON® MP 40-27 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 4 microns and an oil absorption of 30. TALCRON® MP 40-27 is used in paint, coatings, adhesives, and sealants. voir moins | |
TALCRON® MP 44-26 | Specialty Minerals | TALCRON® MP 44-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 5 microns and an oil absorption of 28. TALCRON® MP 44-26 is used in paint, coatings, adhesives, and se...voir plus TALCRON® MP 44-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 5 microns and an oil absorption of 28. TALCRON® MP 44-26 is used in paint, coatings, adhesives, and sealants. voir moins | |
TALCRON® MP 45-26 | Specialty Minerals | TALCRON® MP 45-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 8 microns and an oil absorption of 26. TALCRON® MP 45-26 is used in paint, coatings, adhesives, and se...voir plus TALCRON® MP 45-26 is a talc product which improves stiffness and impact resistance in polymer applications. This product has an average particle size of 8 microns and an oil absorption of 26. TALCRON® MP 45-26 is used in paint, coatings, adhesives, and sealants. voir moins | |
Talkron® CL 10 | Minerals Girona S.A. | Talkron® CL 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It is a magnesium aluminum hydrosilicate of ...voir plus Talkron® CL 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It is a magnesium aluminum hydrosilicate of lamellar structure, with a good grade of whiteness and whose barrier effect, reology and chemical inertia made it ideal for industrial, anticorrosion or decorative paints. It has an ignition index of 7'21%, an HCI solubles of 2'80%, and a top cut of 10µm. voir moins | |
Talkron® CL 20 | Minerals Girona S.A. | Talkron® CL 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It is a magnesium aluminum hydrosilicate of ...voir plus Talkron® CL 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It is a magnesium aluminum hydrosilicate of lamellar structure, with a good grade of whiteness and whose barrier effect, reology and chemical inertia made it ideal for industrial, anticorrosion or decorative paints. It has an ignition index of 7'21%, an HCI solubles of 2'80%, and a top cut of 20µm. voir moins | |
Talkron® CL 40 | Minerals Girona S.A. | Talkron® CL 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® CL 40 is a magnesium aluminum hydro...voir plus Talkron® CL 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® CL 40 is a magnesium aluminum hydrosilicate of lamellar structure, with a good grade of whiteness and whose barrier effect, reology and chemical inertia made it ideal for industrial, anticorrosion or decorative paints. It has an ignition index of 7'21%, an HCI solubles of 2'80%, and a top cut of 40µm. voir moins | |
Talkron® CL 75 | Minerals Girona S.A. | Talkron® CL 75 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® CL 75 is a magnesium aluminum hydro...voir plus Talkron® CL 75 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® CL 75 is a magnesium aluminum hydrosilicate of lamellar structure, with a good grade of whiteness and whose barrier effect, reology and chemical inertia made it ideal for industrial, anticorrosion or decorative paints. It has an ignition index of 7'21%, an HCI solubles of 2'80%, and a top cut of 75µm. voir moins | |
Talkron® CLASSIC | Provencale S.A. | Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is re...voir plus Talkron® CLASSIC, in the form of a white powder, is a mix of talc and chlorite that has a lamellar structure. This product can be used in industrial, anti-corrosion, and decorative paints. It is indicated for systems where a low level of whiteness is required, and its properties allow the user to regulate and adjust the gloss levels when required. voir moins | |
Talkron® NATUR | Provencale S.A. | Talkron® NATUR, in the form of a white powder, is a talc of high purity that has a lamellar structure and good whiteness. This product can be used in decorative and industrial paints and in plastics. Its platy particles create a barrier effect in interi...voir plus Talkron® NATUR, in the form of a white powder, is a talc of high purity that has a lamellar structure and good whiteness. This product can be used in decorative and industrial paints and in plastics. Its platy particles create a barrier effect in interior or exterior coatings. voir moins | |
Talkron® NT 10 | Minerals Girona S.A. | Talkron® NT 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® NT 10 is a magnesium hydrosilicate ...voir plus Talkron® NT 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. Talkron® NT 10 is a magnesium hydrosilicate of lamellar structure, of high purity and lamellar structure, with a good grade of whiteness making it ideal for use in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 10µm. voir moins | |
Talkron® NT 20 | Minerals Girona S.A. | Talkron® NT 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with a good grade of whiteness, making it ideal for use in systems requiring high covering powder, gloss reduction and a high degree of chemical purity. It is a natur...voir plus Talkron® NT 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with a good grade of whiteness, making it ideal for use in systems requiring high covering powder, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 20µm. voir moins | |
Talkron® NT 30 | Minerals Girona S.A. | Talkron® NT 30 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure, with a good grade of whiteness making it ideal for use in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It has an igni...voir plus Talkron® NT 30 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure, with a good grade of whiteness making it ideal for use in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 30µm. voir moins | |
Talkron® NT 40 | Minerals Girona S.A. | Talkron® NT 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 8'07%, an HCI so...voir plus Talkron® NT 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of brightness. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 40µm. voir moins | |
Talkron® NT 60 | Minerals Girona S.A. | Talkron® NT 60 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in systems requiring high covering powder, gloss reduction and a high degree of chemical purity. It is a n...voir plus Talkron® NT 60 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in systems requiring high covering powder, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 50µm. voir moins | |
Talkron® PR 10 | Minerals Girona S.A. | Talkron® PR 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree o...voir plus Talkron® PR 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 6'01%, an HCI solubles of 3'10%, and a top cut of 10µm. voir moins | |
Talkron® PR 20 | Minerals Girona S.A. | Talkron® PR 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree o...voir plus Talkron® PR 20 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. This product has an ignition index of 6'01%, an HCI solubles of 3'10%, and a top cut of 20µm. voir moins | |
Talkron® PR 40 | Minerals Girona S.A. | Talkron® PR 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree o...voir plus Talkron® PR 40 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. This product has an ignition index of 6'01%, an HCI solubles of 3'10%, and a top cut of 40µm. voir moins | |
Talkron® PR 5 | Minerals Girona S.A. | Talkron® PR 5 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of...voir plus Talkron® PR 5 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. This product has an ignition index of 6'01%, an HCI solubles of 3'10%, and a top cut of 6µm. voir moins | |
Talkron® PURE | Provencale S.A. | Talkron® PURE, in the form of a white powder, is a high-purity talc with good whiteness. This product can be used in hydrophobic indoor and outdoor coatings. It confers dry-hiding properties and can act as a partial replacement for titanium dioxide. | |
Talkron® ST 10 | Minerals Girona S.A. | Talkron® ST 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree o...voir plus Talkron® ST 10 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure with excellent grades of whiteness, making it ideal for use in the plastics industry and in systems requiring high covering power, gloss reduction and a high degree of chemical purity. It is a natural product of great inertia and both chemical and biological stability. It has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 10µm. voir moins | |
Talkron® ST 20 | Minerals Girona S.A. | Talkron® ST 20 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersi...voir plus Talkron® ST 20 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting effect. This product has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 20µm. voir moins | |
Talkron® ST 30 | Minerals Girona S.A. | Talkron® ST 30 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersi...voir plus Talkron® ST 30 is a magnesium hydrosilicate (Talc) containing a small proportion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting effect. It has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 30µm. voir moins | |
Talkron® ST 40 | Minerals Girona S.A. | Talkron® ST 40 is a magnesium hydrosilicate (Talc) containing a small portion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion ...voir plus Talkron® ST 40 is a magnesium hydrosilicate (Talc) containing a small portion of double carbonate of magnesium and calcium. This natural mixture has an excellent grade of whiteness and is ideal for use in systems requiring low absorption, good dispersion and a matting effect. This product has an ignition index of 11'36%, an HCI solubles of 9'10%, and a top cut of 40µm. voir moins | |
Talkron® STYL | Provencale S.A. | Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust...voir plus Talkron® STYL, in the form of a white powder, is a blend of talc, calcium carbonate, and magnesium. This product has a mostly lamellar structure, and can be used in water-based coatings. Its different particle sizes allow the user to regulate and adjust the gloss and whiteness of the end product. voir moins | |
Talkron® ZERO | Provencale S.A. | Talkron® ZERO, in the form of a white powder, is a high-purity talc with a lamellar structure and a good grade of whiteness. This product can be used in high-solids coatings. It is a de-dusted talc with low oil absorption and low surface area. It has a...voir plus Talkron® ZERO, in the form of a white powder, is a high-purity talc with a lamellar structure and a good grade of whiteness. This product can be used in high-solids coatings. It is a de-dusted talc with low oil absorption and low surface area. It has anti-corrosive, hydrophobic, and weather-resistant characteristics. voir moins | |
Talkron® Zero 11 | Minerals Girona S.A. | Talkron® Zero 11 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure, with a good grade of whiteness. It has low oil absorption and low surface area, making it ideal for use in high solids coatings. This product has an ignition index...voir plus Talkron® Zero 11 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure, with a good grade of whiteness. It has low oil absorption and low surface area, making it ideal for use in high solids coatings. This product has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 25µm. voir moins | |
Talkron® Zero 18 | Minerals Girona S.A. | Talkron® Zero 18 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure, with a good grade of whiteness. It has low oil absorption and low surface area, making it ideal for use in high solids coatings. This product has an ignition index...voir plus Talkron® Zero 18 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure, with a good grade of whiteness. It has low oil absorption and low surface area, making it ideal for use in high solids coatings. This product has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 40µm. voir moins | |
Talkron® Zero 22 | Minerals Girona S.A. | Talkron® Zero 22 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure, with a good grade of whiteness. It has low oil absorption and low surface area, making it ideal for use in high solids coatings. This product has an ignition index...voir plus Talkron® Zero 22 is a magnesium hydrosilicate (Talc) of high purity and lamellar structure, with a good grade of whiteness. It has low oil absorption and low surface area, making it ideal for use in high solids coatings. This product has an ignition index of 8'07%, an HCI solubles of 3'70%, and a top cut of 70µm. voir moins | |
Vertal® 503 | Imerys Performance Additives | Vertal® 503 is a highly lamellar talc/carbonate mineral pigment that provides a unique balance of prime pigment spacing (opacity), film reinforcement, anti-cracking and barrier properties to architectural and decorative coatings. | |
Vertal® 7 | Imerys Performance Additives | Vertal® 7 is a highly lamellar talc/carbonate mineral pigment that provides a unique balance of prime pigment spacing (opacity), film reinforcement, anti-cracking and barrier properties to architectural and decorative coatings. | |
Vertal® 77 | Imerys Performance Additives | Vertal® 77 is a highly lamellar talc/carbonate mineral pigment that provides a unique balance of prime pigment spacing (opacity), film reinforcement, anti-cracking and barrier properties to architectural and decorative coatings. | |
Vertal® 92 | Imerys Performance Additives | Vertal® 92 is a talcose product with a platy structure used as a reinforcement for black polypropylene compounds, as a dusting/parting agent in the rubber industry, and as filler in auto body compounds, caulks, putties and sealants. | |
Vertal® 97 | Imerys Performance Additives | Vertal® 97 is a platy talcose product recommended as a cost-effective reinforcement for black polypropylene compounds, as a dusting/parting agent in rubber compounding and as a filler in auto body compounds, caulks, putties and sealants. |