| 2-Ethylhexanoic Acid | Perstorp | 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and P...voir plus 2-Ethylhexanoic Acid is a colorless liquid with one carboxylic group based on a C8 carbon chain. 2-EHA is widely used in esters for PVB film plasticizers and synthetic lubricants, in production of metal soaps for paint driers, in automotive coolants and PVC stabilizers. Other application areas include wood preservatives, catalyst for polyurethane and in pharmaceuticals. voir moins | |
| Abex® 23S 50 | Rhodia Solvay Group | Abex® 23S 50 is an APE free anionic system for environmentally sensitive requirements. It is highly effective as steric and electrostatic stabilizers for emulsion polymerization. It is also an effective emulsifier for small particle size in acrylic and st...voir plus Abex® 23S 50 is an APE free anionic system for environmentally sensitive requirements. It is highly effective as steric and electrostatic stabilizers for emulsion polymerization. It is also an effective emulsifier for small particle size in acrylic and styrene acrylic lattices. This product is supplied in an aqueous/alcohol solution and is inherently biodegradable. Abex® 23S 50 is available in bulk quantities and 2,200lb totes. Alternative package sizes may be available upon request. voir moins | |
| Acetylated Distarch Ddipate | Beijing Entrepreneur Science &Trading Co., Ltd. | Acetylated Distarch Ddipate has a certain ability of anti-acid and anti-alkali, anti-cutting ability, is of good viscosity. It is used it as thickening agent, premium quality stabiliser in wallpaper adhesive. | |
| ADDITOL® XL 6557 | Allnex | Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gl...voir plus Additol® XL 6557 is a crosslinkable polymeric grinding medium. It provides pigment wetting, low paste viscosity, and good pigment stabilization in pigment pastes. Finished coatings tinted with this product have high hardness, yellowing resistance, high gloss, good drying properties, and good water/weather resistance. It is recommended for solvent-borne industrial applications, such as coil coatings, marine and heavy duty anti-corrosive paints, agriculture, industrial wood, and other metal coatings. voir moins | Request Sample |
| AERODISP® W 7520 | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabi...voir plus AERODISP® W 7520 is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a slight ammonia odor that has a low thickening effect and low viscosity. AERODISP® W 7520 is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. voir moins | Request Sample |
| AERODISP® W 7520 N | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adh...voir plus AERODISP® W 7520 N is a low viscosity, water-based dispersion of AEROSIL® fumed silica, with a slightly alkaline pH. It is a milky-white liquid with a low thickening effect and low viscosity. AERODISP® W 7520 N is used for stabilization for emulsions, adhesive promotion, anti-slip, anti-blocking, and surface treatment such as polishing. It also can be used for rheology control and and flocculation aid. voir moins | Request Sample |
| AERODISP® W 7520 NF | Evonik Operations GmbH, BL Coating Additives | AERODISP® W 7520 NF is an aqueous dispersion of a hydrophilic fumed silica with an alkaline pH-value, which is recommended for food contact applications. | Request Sample |
| AEROSIL® E 805 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 805 is a fumed silica after being treated with organosilane. It provides extraordinary rheological properties by keeping brilliant transparency. In addition, it is very easy to disperse. | Request Sample |
| AEROSIL® E 812 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 812 is a fumed silica post-treated with organosilane (HMDS) and a high specific surface area combined with exceptional hydrophobicity. In addition, it is very easy to disperse. | Request Sample |
| AEROSIL® E 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 9200 is a structure-modified, hydrophobic fumed silica. Enables high loading levels at low viscosities. In addition, it is very easy to disperse. | Request Sample |
| AEROSIL® E 972 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® E 972 is a fumed silica after being treated with DDS (dimethyldichlorosilane). It is a very efficient Rheology Modifier suitable for a broad range of applications while being very easy to disperse. | Request Sample |
| AEROSIL® R 7200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 7200 is a structure modified fumed silica after treated with methacrylsilane. | Request Sample |
| AFCONA - 6700 | AFCONA Additives Sdn Bhd | AFCONA – 6700 is an anti-gel agent based on ketoxime and a phosphorous ester salt. This clear to slightly yellow liquid functions as a viscous stabilizer for air-drying and stoving coating systems, and in air-drying alkyd paints to form a protective layer...voir plus AFCONA – 6700 is an anti-gel agent based on ketoxime and a phosphorous ester salt. This clear to slightly yellow liquid functions as a viscous stabilizer for air-drying and stoving coating systems, and in air-drying alkyd paints to form a protective layer to prevent oxidation. voir moins | |
| Antioxidant SN-1 | Tiarco Chemical | Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds...voir plus Antioxidant SN-1 is a highly active, non-discoloring secondary antioxidant with low volatility. It can be used with primary phenolic and amine antioxidants. Unlike other thioesters, this product may be used in both uncured and sulfur cured latex compounds, and the maximum benefits are best noticed when used in combination with a primary antioxidant in natural and synthetic polymers. It is used in light colored or black compounds such as carpet backing foams, scrim adhesives, SBR latex stabilization, rubber based adhesives, footwear compounds and mechanical goods, and more. voir moins | |
| Borchi® Gen 1252 | OMG Borchers GmbH | Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for prep...voir plus Borchi® Gen 1252 is a 100% acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous and solventborne pigment concentrates with and without grinding resin. voir moins | |
| Borchi® Gen 1253 | OMG Borchers GmbH | Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applica...voir plus Borchi® Gen 1253 is the aqueous solution of an acrylic ester copolymer with excellent wetting and deflocculation properties systems. It is a highly effective additive for the wetting, dispersing and stabilizing of pigments in high-grade waterborne applications. Due to the small particle size of the deflocculated pigments excellent color strength and high gloss is achieved. Borchi® Gen 1253 prevents settling and re-flocculation even after prolonged storage of paints and pigment pastes. In addition, this product contains no organic solvents whatsoever and is completely VOC-free. voir moins | |
| Borchi® Gen 1350 | OMG Borchers GmbH | Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins...voir plus Borchi® Gen 1350 is an aqueous solution of an acid polyurethane copolymer with excellent wetting and deflocculation properties systems. It is especially recommended for high quality wood, decorative and industrial paints. It is widely compatible in resins and excellent for preparation of aqueous pigment concentrates. Borchi® Gen 1350 reveals high dispersing and stabilizing capability for transparent iron oxide pigments as well as organic and inorganic pigments. voir moins | |
| BYK®-330 | BYK | BYK®-330 is a solution of a polyether modified polydimethylsiloxane. It is a standard surface additive in the coatings industry for all solvent-borne systems. These additives provide a medium reduction of the surface tension of paint systems.They increase...voir plus BYK®-330 is a solution of a polyether modified polydimethylsiloxane. It is a standard surface additive in the coatings industry for all solvent-borne systems. These additives provide a medium reduction of the surface tension of paint systems.They increase surface slip as well as improve leveling and gloss. Silicone additives prevent formation of Bénard cells. These additives also improve substrate wetting and give anti-blocking properties. voir moins | |
| BYK®-ES 80 | BYK | BYK®-ES 80 is an additive used to increase conductivity of electrostatically sprayed solvent-borne coatings. It is a solution of an alkylolammonium salt of an unsaturated acidic carboxylic acid ester. This product increases the conductivity of the paints ...voir plus BYK®-ES 80 is an additive used to increase conductivity of electrostatically sprayed solvent-borne coatings. It is a solution of an alkylolammonium salt of an unsaturated acidic carboxylic acid ester. This product increases the conductivity of the paints (reduces the electrical resistance). It also maintains the film properties (such as adhesion), does not cause yellowing and stabilizes viscosity. voir moins | |
| BYK®-P 104 | BYK | BYK®-P 104 is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer. This product is suitable for medium to high polar systems and particularly effective in preven...voir plus BYK®-P 104 is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer. This product is suitable for medium to high polar systems and particularly effective in preventing flooding of titanium dioxide in combination with other color pigments. It is also used in amine-neutralized aqueous coatings; it is not compatible with mineral spirits. When used in anti-corrosion primers, in many cases the protective properties are enhanced. voir moins | |
| BYK®-P 104 S | BYK | BYK®-P 104 S is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer and a polysiloxane copolymer. This product can be used in the same systems as BYK-P 104. The ...voir plus BYK®-P 104 S is a wetting and dispersing additive for solvent-borne systems. It is a solution of a lower molecular weight unsaturated polycarboxylic acid polymer and a polysiloxane copolymer. This product can be used in the same systems as BYK-P 104. The additive also contains a small amount of a polysiloxane copolymer to more effectively avoid flooding. This silicone content is additionally helpful in preventing Bénard cells and silking, and also improves surface slip, leveling and orientation of flatting agents or aluminium flakes. Therefore it is oftentimes not necessary to add a separate dosage of an otherwise needed silicone additive. voir moins | |
| BYK®-P 105 | BYK | BYK®-P 105 is a wetting and dispersing additive for solvent-borne systems. It is a lower molecular weight unsaturated polycarboxylic acid polymer. This product is the solvent-free version of BYK-P 104. These additives lead to a controlled flocculation of ...voir plus BYK®-P 105 is a wetting and dispersing additive for solvent-borne systems. It is a lower molecular weight unsaturated polycarboxylic acid polymer. This product is the solvent-free version of BYK-P 104. These additives lead to a controlled flocculation of pigments. "Bridges“ are formed between single pigment particles causing three-dimensional structures to develop. Through controlled flocculation of pigments, flooding and floating, settling, and sagging of pigments is avoided. voir moins | |
| Carbowet® 138 Surfactant | Evonik Operations GmbH, BL Coating Additives | Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment...voir plus Carbowet® 138 Surfactant is a multifunctional additive for pigment and substrate wetting. This nonionic surfactant is typically used alone or in combination with an anionic surfactant. This cost-effective surfactant can provide rapid substrate and pigment wetting and perform in a wide range of applications. voir moins | Request Sample |
| Celofiber® CF200W | Celotech Chemical Co., Ltd. | Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influ...voir plus Celofiber® CF200W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF200W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF200W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 200um. voir moins | |
| Celofiber® CF300W | Celotech Chemical Co., Ltd. | Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influ...voir plus Celofiber® CF300W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF300W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF300W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 300um. voir moins | |
| Celofiber® CF450G | Celotech Chemical Co., Ltd. | Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It impr...voir plus Celofiber® CF450G is a powdery to fibrous cellulose additive for use in construction chemical products. The structure viscose behavior of Celofiber® CF450G has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450G extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. voir moins | |
| Celofiber® CF450W | Celotech Chemical Co., Ltd. | Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influ...voir plus Celofiber® CF450W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF450W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF450W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 450um. voir moins | |
| Celofiber® CF500W | Celotech Chemical Co., Ltd. | Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influ...voir plus Celofiber® CF500W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF500W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF500W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 500um. voir moins | |
| Celofiber® CF60W | Celotech Chemical Co., Ltd. | Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influen...voir plus Celofiber® CF60W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF60W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF60W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 60um. voir moins | |
| Celofiber® CF800W | Celotech Chemical Co., Ltd. | Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influ...voir plus Celofiber® CF800W is a water-insoluble cellulose left in its natural state. Cellulose fiber is a powdery to fibrous cellulose additive for use in construction chemicals products. The structure viscose behavior of Celofiber® CF800W has an outstanding influence on the anti-sagging effects of plasters and filling compounds. It improves the green stability substantially, thus enabling thick or thin layers to be applied in one single step without slipping down from vertical surfaces. The three dimensional fiber skeleton provides reduced shrinking, which helps prevent the formation of cracks during the drying process. Celofiber® CF800W extends the pot life, liquid migration from the inside to the outside inhibits the development of a film. This product has a fiber length of 800um. voir moins | |
| CLAYTONE®-ll | BYK | CLAYTONE®-ll is an economy grade, organo-modified clay rheological additive recommended for use in oil based muds. In addition to imparting excellent rheological properties, it increases the carrying capacity and hole cleaning capabilities of the drilling...voir plus CLAYTONE®-ll is an economy grade, organo-modified clay rheological additive recommended for use in oil based muds. In addition to imparting excellent rheological properties, it increases the carrying capacity and hole cleaning capabilities of the drilling fluid. CLAYTONE®-ll also has the secondary benefits of improving filtration control and emulsion stability. voir moins | |
| Decoupage MNP | Univar Solutions | Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage co...voir plus Decoupage MNP is a high quality nonylphenol specifically intended for use in epoxy decoupage formulations. It contains an inhibitor to maintain color stability of the nonylphenol and to prevent the formation of undesirable color bodies in the decoupage coating. Decoupage MNP can also be used in other nonylphenol applications where color stability is of prime importance. voir moins | |
| Dimethyl Sebacate (DMS) | ChemCeed | Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation ...voir plus Dimethyl Sebacate (DMS) is a plasticizer for both nitrocellulose, rubber, vinyl resins. Dimethyl sebacate is used in the production of light stabilizers which are used in coatings to protect surfaces and pigments against photo degradation by deactivation of free radicals. Dimethyl sebacate can also be used as a solvent for resins and rubbers. In inks and coatings, DMS can soften binders to improve flexibility. voir moins | |
| DISPERBYK®-2013 | BYK | DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excel...voir plus DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excellent stabilization, in particular in 100% UV systems and particularly of organic pigments and carbon black pigments. In so doing, this product has an impressive, effective viscosity-reducing effect, simultaneously reducing thixotropic flow behavior. voir moins | |
| Eastman Advantex™ | Eastman Chemical | Eastman Advantex™ is a neutralizing amine additive for coatings. It helps you reduce VOC's, is non-yellowing, with much less amine odor. Eastman Advantex™ provides these and a host of added benefits not other neutralizing amine offers. | |
| Eastman Vantex® T | Eastman Chemical | Eastman Vantex® T is a zero VOC amine additive for paint and coatings, and is available as liquid. | |
| EFKA® FA 4642 | BASF Formulation Additives | EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not aff...voir plus EFKA® FA 4642 is an additive for pigment dispersion. It reduces the interfacial tension between pigments or extenders and the vehicle. This product is compatible with all solvent or solvent-free coating systems. The pot-life of two-pack systems is not affected. In the dispersion of organically treated Bentonites, the use of EFKA® FA 4642 shortens dispersion time, provides easier handling of the Bentonite gel, and improves storage stability. voir moins | |
| EFKA® FA 4654 | BASF Formulation Additives | EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced...voir plus EFKA® FA 4654 helps to prevent interfacial tension between the hydrophilic pigments/extenders and binder, forming a lattice structure with the pigments at the same time. This means: reduced dispersion time, stabilization of the pigment dispersion, reduced pigment sedimentation, reduced tendency to sag during application on vertical surfaces, and prevention of flooding. It is a high molecular weight carboxylic acid salts. EFKA® FA 4654 is ideal for dispersing organophilic bentonites, because it reduces dispersion time, improves the storage properties of the final paste and gives a thixotropic, easily processed paste product. It is especially suitable for non- to medium-polar binder systems, ie. air-dried alkyd resins, chlorinated polymers, alkyd/amino resin combinations and epoxies. EFKA® FA 4654 can cause discoloration in nitrocellulose varnishes. voir moins | |
| EMCAflex® 140 | Indorama Ventures | EMCAflex® 140 is made up of mineral oils specially developed for use as extensor oils in the production of rubbers. Its characteristics enable it to be formulated in transparent and colorless shoes, adhesives for diapers and sanitary towels. This product ...voir plus EMCAflex® 140 is made up of mineral oils specially developed for use as extensor oils in the production of rubbers. Its characteristics enable it to be formulated in transparent and colorless shoes, adhesives for diapers and sanitary towels. This product is used as an extensor in the manufacture of thermoplastic rubbers in the resin market, providing a quality final product. voir moins | |
| EMCAflex® 140 A | Indorama Ventures | EMCAflex® 140 A is made up of mineral oils specially developed for use as extensor oils in the production of rubbers. Its characteristics enable it to be formulated in transparent and colorless shoes, adhesives for diapers and sanitary towels. It is used ...voir plus EMCAflex® 140 A is made up of mineral oils specially developed for use as extensor oils in the production of rubbers. Its characteristics enable it to be formulated in transparent and colorless shoes, adhesives for diapers and sanitary towels. It is used as an extensor in the manufacturing of transparent or colorless shoes in the resin market, an extensor in the manufacturing of thermoplastic rubbers, providing the final product with good quality, improving the oxidation processes and preventing yellowing. voir moins | |
| EMCAflex® 200 | Indorama Ventures | EMCAflex® 200 is made up of mineral oils specially developed for use as extensor oils in the production of rubbers. It is used as an extensor in the manufacturing of thermoplastic rubbers in the resin market; EPDM rubbers and adhesives, providing good inc...voir plus EMCAflex® 200 is made up of mineral oils specially developed for use as extensor oils in the production of rubbers. It is used as an extensor in the manufacturing of thermoplastic rubbers in the resin market; EPDM rubbers and adhesives, providing good incorporation into the rubber, resulting in greater stability in oxidation processes, preventing yellowing and increasing the quality of the final product. voir moins | |
| EMCAflex® 480 N-2 | Indorama Ventures | EMCAflex® 480 N-2 is made up of mineral oils specially developed for use as extensor oils in the production of rubbers. This product can be used as an extensor in the manufacturing of transparent or colorless shoes in the resin market, an extensor in the ...voir plus EMCAflex® 480 N-2 is made up of mineral oils specially developed for use as extensor oils in the production of rubbers. This product can be used as an extensor in the manufacturing of transparent or colorless shoes in the resin market, an extensor in the manufacturing of thermoplastic rubbers, providing the final product with good quality, improving the oxidation processes and preventing yellowing. voir moins | |
| Exilva® F 01-L | Borregaard ChemCell | Exilva® F 01-L is a bio-based pre-activated multifunctional additive. Exilva® F 01-L increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...voir plus Exilva® F 01-L is a bio-based pre-activated multifunctional additive. Exilva® F 01-L increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. voir moins | |
| Exilva® F 01-V | Borregaard ChemCell | Exilva® F 01-V is a bio-based pre-activated multifunctional additive. Exilva® F 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...voir plus Exilva® F 01-V is a bio-based pre-activated multifunctional additive. Exilva® F 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. voir moins | |
| Exilva® P 01-L | Borregaard ChemCell | Exilva® P 01-L is a microfibrillated cellulose. | |
| Exilva® P 01-V | Borregaard ChemCell | Exilva® P 01-V is a bio-based pre-activated multifunctional additive. Exilva® P 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved fl...voir plus Exilva® P 01-V is a bio-based pre-activated multifunctional additive. Exilva® P 01-V increases your formulation efficiency, reduces your CO2 footprint and creates exciting opportunities for innovation. Provides increased formulation stability, improved flow and sag/drip control, enhanced spray ability of thick formulations, improved workability, structuring, enhanced properties of films/cured formulations; oxygen barrier and reinforcing effect, good water resistance. voir moins | |
| FORTGEL 1000 | Wana Química | FORTGEL 1000 is a magnesium silicate consisting of elongated crystals, such as attapulgite, which after processing, produces a fine cream-colored powder with easy handling. It was developed for the coating segment, especially coatings which aid in stabili...voir plus FORTGEL 1000 is a magnesium silicate consisting of elongated crystals, such as attapulgite, which after processing, produces a fine cream-colored powder with easy handling. It was developed for the coating segment, especially coatings which aid in stabilizing, preventing sedimentation and syneresis. This product also offers excellent whiteness. voir moins | |
| LOPON® 827 | ICL Phosphate Specialty | LOPON® 827 is a stabilizer for water glass systems. This yellowish liquid is a derivative of amine. This product is used as an additive in silicate paints, and it improves viscosity stability in storage, improves adding pigments and fillers. It also used ...voir plus LOPON® 827 is a stabilizer for water glass systems. This yellowish liquid is a derivative of amine. This product is used as an additive in silicate paints, and it improves viscosity stability in storage, improves adding pigments and fillers. It also used for the prevention of thickening during storage and improves the application. voir moins | Request Sample |
| LOPON® 828 | ICL Phosphate Specialty | LOPON® 828 is a highly effective stabilizer for emulsion silicate paints which prevents silicate groups in water glass from building up a polymeric network during storage. The viscosity of the paint levels off quickly and remains stable over a long period...voir plus LOPON® 828 is a highly effective stabilizer for emulsion silicate paints which prevents silicate groups in water glass from building up a polymeric network during storage. The viscosity of the paint levels off quickly and remains stable over a long period of time. LOPON® 828 is particularly low in VOC and SVOC, which makes it attractive for decorative wall paints for indoor living spaces. voir moins | Request Sample |
| LOPON® ST | ICL Phosphate Specialty | LOPON® ST is a stabilizer for water glass systems. This yellow liquid is a quaternary ammonium compound. LOPON® ST is used as an additive in silicate paints and plasters. It improves viscosity stability in storage and improves adding pigments and fillers. | Request Sample |
| LOPON® STA | ICL Phosphate Specialty | LOPON® STA is an additional stabilizer for water glass systems. It is a clear, colourless liquid of silanols combined with stabilizing additives. LOPON® STA is used together with LOPON® ST or LOPON® 827 in emulsion silicate paints. This product is know fo...voir plus LOPON® STA is an additional stabilizer for water glass systems. It is a clear, colourless liquid of silanols combined with stabilizing additives. LOPON® STA is used together with LOPON® ST or LOPON® 827 in emulsion silicate paints. This product is know for stabilizing the paint viscosity during the storage time and improvement of the waterstability. It decreases thickening and improves the workability and the addition of pigments and fillers. voir moins | Request Sample |
| LOPON® STM | ICL Phosphate Specialty | LOPON® STM is a co-stabilizer to enhance the performance of emulsion silicate paints in combination either with LOPON® ST, LOPON® 827 or LOPON® 828. LOPON® STM adds additional stabilization and has a positive influence on leveling behavior. Where conformi...voir plus LOPON® STM is a co-stabilizer to enhance the performance of emulsion silicate paints in combination either with LOPON® ST, LOPON® 827 or LOPON® 828. LOPON® STM adds additional stabilization and has a positive influence on leveling behavior. Where conformity to Ecolabel is desired, LOPON® STM is the proper choice as it is EDTA free. voir moins | Request Sample |
| LUDOX® AM | Univar Solutions | LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Col...voir plus LUDOX® AM Colloidal Silica contains synthetic amorphous silica of nominal 12 nanometer particle size. The aqueous colloidal dispersion contains 30% silica and is formulated to give broader pH stability than standard alkali stabilized grades. LUDOX® AM Colloidal Silica can be incorporated at neutral or slightly acid pH to yield stable formulations, making it suitable in many coating applications. voir moins | |
| NUOSPERSE® FA 115 | Elementis | NUOSPERSE® FA 115 is a waterborne additive to improve the incorporation of universal tinting pastes into the base dispersion paint. | |
| Nyacol® CeO2 | Nyacol Nano Technology | Nyacol® CeO2 is cerium oxide. This product is designed for use in automotive and other catalyst production. Nyacol® CeO2 is used in glass polishing and coating applications. | |
| Octolite 424-50 | Tiarco Chemical | Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant pro...voir plus Octolite 424-50 is a dispersible aqueous antioxidant emulsion, composed of a synergistic blend of sterically hindered phenol and thioester. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in synthetic and natural latex polymers. This product is recommended for use in carboxylated SBR latex compounds and adhesives. voir moins | |
| Octolite 497 | Tiarco Chemical | Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat...voir plus Octolite 497 is an aqueous antioxidant dispersion composed of butylated hydroxytoluene. It is non-staining, non-discoloring in performance, and provides highly efficient stabilization and antioxidant protection in many polymers against the effects of heat, ultraviolet light, and oxidation. This dispersion is milled to a fine particle size for maximum activity. Octolite 497 is well suited for use in the production of food packaging adhesives and with repeated use rubber products. voir moins | |
| Octolite 544 CF | Tiarco Chemical | Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, a...voir plus Octolite 544 CF is a casein free, 55% concentrated, anionic aqueous dispersion of DNPD antioxidant and metal deactivator (copper inhibitor). This highly active antioxidant is semi-staining and provides good heat and oxidation resistance to SBR, natural, and other latex systems. It is also particularly beneficial in protecting against degradation by trace metals such as copper and manganese. voir moins | |
| Octolite 640 | Tiarco Chemical | Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protectio...voir plus Octolite 640 is a dispersible aqueous antioxidant emulsion consisting of a synergistic blend of sterically hindered phenol and thioester. Non-staining and non-discoloring in performance, it provides highly efficient stabilization and antioxidant protection in SBR, natural, and neoprene latex polymers. Octolite 640 is particularly useful for providing superior protection against high-temperature degradation in certain latex polymer compounds. voir moins | |
| Octolite 647 | Tiarco Chemical | Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many p...voir plus Octolite 647 is a yellow to tan aqueous dispersion of polymeric quinoline derivative. This general-purpose semi-staining antioxidant is frequently used in latex compounding to impart high temperature resistance. It also improves ozone resistance of many polymers. It is non-blooming and of high durability. This product is typically used as a rubber antioxidant stabilizer for natural, butadiene, chloroprene, and nitile latex. Octolite 647 is also used as a corrosion inhibitor and preservative (it retards oxidation, deterioration, and rancidity). voir moins | |
| Octolite 668 | Tiarco Chemical | Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH ran...voir plus Octolite 668 is an anionic aqueous emulsion composed of a highly active, multi-purpose, non-phenolic antioxidant mixture, for all types of latex rubber. It is only slightly staining and virtually non-discoloring. This emulsion is stable over a wide pH range for direct addition to latex. It exhibits low volatility and excellent frothability. Octolite 668 is also highly effective in polychloroprene polymers, providing protection against degradation due to heat, light, and oxygen. voir moins | |
| Octolite 806 | Tiarco Chemical | Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for u...voir plus Octolite 806 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (dilaurylthiodipropionate). It provides highly efficient stabilization and antioxidant protection. Octolite 806 is recommended for use in butadiene/styrene and synthetic latex compounds as well as SBR and natural rubber compounds. voir moins | |
| Octolite 809 | Tiarco Chemical | Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-...voir plus Octolite 809 is an aqueous anionic dispersion of 2,2'-Methylenebis (4-methyl-6-tert-butylphenol). This primary phenolic antioxidant is effective in preventing thermal oxidation of SBR and natural latex films, adhesives, and foams. This dispersion is ball-milled to a fine particle size for maximum activity. Octolite 809 is essentially non-staining but can cause some slight pink discoloration in certain applications. voir moins | |
| Octolite AO-50 | Tiarco Chemical | Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protectio...voir plus Octolite AO-50 is a dispersible aqueous emulsion composed of a synergistic blend of sterically hindered phenol and thioester (ditridecylthiodipropionate). This economical, non-staining, non-discoloring antioxidant provides good stabilization and protection to synthetic and natural latex polymers. Octolite AO-50 is ideally suited for use in carboxylated SBR latex compounds and adhesives. voir moins | |
| Octolite WL | Tiarco Chemical | Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against ...voir plus Octolite WL is an aqueous anionic dispersion of sterically hindered phenol. It is non-staining and non-discoloring in performance and provides highly efficient stabilization and antioxidant protection in ABS, synthetic, and natural latex polymers against the effects of heat, ultraviolet light, and oxidation. Octolite WL is well suited for use in the production of food packaging adhesives and with repeated use rubber products. voir moins | |
| PAT-ADD DA 787 | Patcham USA | PAT-ADD DA 787 is an emulsifier and stabilizer of water in organic solvent borne paints. Aqueous solutions of PAT-ADD DA 787 are admixed into the paint under mild conditions. The product provides impressively long term stability without phase separation, ...voir plus PAT-ADD DA 787 is an emulsifier and stabilizer of water in organic solvent borne paints. Aqueous solutions of PAT-ADD DA 787 are admixed into the paint under mild conditions. The product provides impressively long term stability without phase separation, pigment flocculation, gloss reduction or adverse effects on drying time. It enables reduction in VOC content for solvent borne paints by replacing thinner with water. Main benefits are: enabling paint cost reduction with water replacement, enabling reduction of VOC level, maintaining standard paint manufacturing conditioners, supports colorant acceptance, and excellent dry film performance, such as high gloss, opacity, and adhesion. voir moins | Request Sample |
| PAT-ADD DA 788 | Patcham USA | PAT-ADD DA 788 is a unique stabilizer for water in organic solvent borne alkyd resins and coatings. It stabilizes water in organic solvent borne alkyd paints, By the use of PAT-ADD DA 788, solvent-borne alkyd paints are formulated replacing part of the mi...voir plus PAT-ADD DA 788 is a unique stabilizer for water in organic solvent borne alkyd resins and coatings. It stabilizes water in organic solvent borne alkyd paints, By the use of PAT-ADD DA 788, solvent-borne alkyd paints are formulated replacing part of the mineral spirits with water. This results in reduction in VOC content, at lowest cost. Main benefits are: enabling paint cost reduction by water addition, enabling reduction in VOC level, and replacement of 20 to 35% of traditionally used white spirit in alkyd paint. voir moins | Request Sample |
| PAT-ADD DA 815 | Patcham USA | PAT-ADD DA 815 Solvent-free wetting and dispersing additive for solvent-borne and solvent-free systems; PVC plastisols, thermoplastics, and adhesives to stabilize organic and inorganic pigments, particularly carbon blacks. It is especially suited for the ...voir plus PAT-ADD DA 815 Solvent-free wetting and dispersing additive for solvent-borne and solvent-free systems; PVC plastisols, thermoplastics, and adhesives to stabilize organic and inorganic pigments, particularly carbon blacks. It is especially suited for the production of polyol pastes for PU as well as PVC applications. It induces Newtonian flow by strongly lowering viscosity. It can also work as neutralizer for acidic and neutral surface treated carbon black pigments. Main benefits are: provides excellent uniformity and color development, lowers torque requirement and filtration pressure, reduces viscosity, and solvent free. voir moins | Request Sample |
| PAT-ADD DA 895 | Patcham USA | PAT-ADD DA 895 Solvent-free wetting and dispersing additive for solvent-borne and solvent-free systems; epoxy, and UPR formulations and adhesives to stabilize organic and inorganic pigments, particularly carbon blacks. It is also suitable for plasticizer ...voir plus PAT-ADD DA 895 Solvent-free wetting and dispersing additive for solvent-borne and solvent-free systems; epoxy, and UPR formulations and adhesives to stabilize organic and inorganic pigments, particularly carbon blacks. It is also suitable for plasticizer or polyol based colorants for PU foam as well as PVC applications. It induces Newtonian flow behavior by strongly lowering viscosity. It can also work as neutralizer for acidic and neutral surface treated carbon black pigments. Main benefits are: provides excellent uniformity and color development, lowers torque requirement and filtration pressure, reduces viscosity, and solvent-free. voir moins | Request Sample |
| PAT-ADD FS 1008 | Patcham USA | PAT-ADD FS 1008 is a silicone resin based mechanical foam stabilizer for foamable PVC plastisol. Main benefits are: fine, homogenous and open-celled foam structure, very good resistance to compression set, reduced water uptake of the gelled and fused PVC ...voir plus PAT-ADD FS 1008 is a silicone resin based mechanical foam stabilizer for foamable PVC plastisol. Main benefits are: fine, homogenous and open-celled foam structure, very good resistance to compression set, reduced water uptake of the gelled and fused PVC plastisol, and drier touch compared to soap-based foam stabilizer. voir moins | Request Sample |
| Polycol WP-001 | Polygal AG | POLYCOL WP-001 is a etherified polysaccaride with a very low viscosity mainly used as a thickener/rheology modifier for waterbased wall paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, POLYCOL WP-001 stabi...voir plus POLYCOL WP-001 is a etherified polysaccaride with a very low viscosity mainly used as a thickener/rheology modifier for waterbased wall paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, POLYCOL WP-001 stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-001 show nearly newtonian behaviour; i.e. the viscosity does almost not change with increasing shear-rate, independent of time (no thixotropy). voir moins | |
| Polycol WP-05 | Polygal AG | POLYCOL WP-05 is a etherified polysaccaride with a low viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pig...voir plus POLYCOL WP-05 is a etherified polysaccaride with a low viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-05 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-05 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-05 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. voir moins | |
| Polycol WP-10 | Polygal AG | POLYCOL WP-10 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises ...voir plus POLYCOL WP-10 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-10 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-10 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-10 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. voir moins | |
| Polycol WP-15 | Polygal AG | POLYCOL WP-15 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises ...voir plus POLYCOL WP-15 is a etherified polysaccaride with a medium viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-15 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-15 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-15 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. voir moins | |
| Polycol WP-20 | Polygal AG | POLYCOL WP-20 is a etherified polysaccaride with a high viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pi...voir plus POLYCOL WP-20 is a etherified polysaccaride with a high viscosity mainly used as a thickener/rheology modifier for waterbased wall-paints, plasters and other waterbased coatings up to pH max. 11. Further to the thickening effect, the product stabilises pigments and fillers and regulates the water retention (open time) after paint application. Solutions of POLYCOL WP-20 behave slightly pseudoplastically; i.e. the viscosity decreases slightly as a function of increased shear-rate, independent of time. The production process of POLYCOL WP-20 includes a special surface treatment, which delays the swelling of the product in water at a neutral or slightly acidic pH. This enables the user to disperse POLYCOL WP-20 easily in water without getting lumps. By increasing the pH to 8.5 – 9 or higher, the swelling occurs immediately. voir moins | |
| R-1008-1 | NuSil Silicone Technology 1 | R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating t...voir plus R-1008-1 is a white, RTV silicone coating and marking ink that is a one part, flowable silicone elastomer dispersion and cures in 7 days at room temperature when exposed to atmospheric moisture. It is best used for applications that require an operating temperature of 65°C to 260°C (-85°F to 465°F).This product can be used as a marking ink for silicone rubber parts and other components where the coating must maintain long term stability. voir moins | |
| R-8004 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...voir plus R-8004 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8004 has ≥70% siloxane content. voir moins | |
| R-8005 Siloxane Masterbatch | Zhejiang Feidian Chemical Co., Ltd. | R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanc...voir plus R-8005 Siloxane Masterbatch is an ultra-high molecular weight siloxane polymer. It offers improved processing fluidity, lubricating property, and demolding ability of plastics to reduce equipment frictional loss and decrease buildup. It also offers enhanced scratch resistance, excellent stability, low mobility, improved fire-retardancy, and increased cable speed. This product is a silicone lubricant which functions as a processing agent in the plastics industry. It can also be used to reduce surface defects for glass fiber reinforced composites. R-8005 has ≥50% siloxane content. voir moins | |
| Raybo 41 Spangle | Raybo Chemical | Raybo 41 Spangle is a paint additive in a liquid form. This product is most commonly used to improve storage stability, leafing, and brightness in aluminum paint applications. | |
| Regulator ZL | OMG Borchers GmbH | Regulator ZL is a stabilizer for solvent-free 2K-polyurethane paints. This finely milled powder is a highly acidic cation exchanger. Alkaline fillers may by catalytic action shorten the application time of solvent-free 2K-PU Desmophen® / Desmodur® systems...voir plus Regulator ZL is a stabilizer for solvent-free 2K-polyurethane paints. This finely milled powder is a highly acidic cation exchanger. Alkaline fillers may by catalytic action shorten the application time of solvent-free 2K-PU Desmophen® / Desmodur® systems. This product can be added as cation exchanger in order to counteract this. General lengthening of the application time through addition of Regulator ZL is not possible, however. voir moins | |
| RENEWABLE ORIGIN Sebacic Acid Polyester Polyol PPS-10100 | Kowa American Corporation | RENEWABLE ORIGIN PPS-10100 is a sebacic acid polyester polyol primarily used in polyurethanes for stability, heat, solvent & chemical resistance, low temp characteristics and application color stability in coatings, adhesives & sealants, & inks. | |
| REOGEL 400 | Wana Química | REOGEL 400 is a hydrated aluminum silicate, a mixed composition of inorganic extraction and clay compounds. It was developed specifically for the segment of paints and coatings, and it helps in stabilizing, preventing sedimentation and syneresis, and is a...voir plus REOGEL 400 is a hydrated aluminum silicate, a mixed composition of inorganic extraction and clay compounds. It was developed specifically for the segment of paints and coatings, and it helps in stabilizing, preventing sedimentation and syneresis, and is a product of excellent whiteness. voir moins | |
| Reservol Flake | Tiarco Chemical | Reservol Flake is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of yellow to tan flakes. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| Reservol Liquid | Tiarco Chemical | Reservol Liquid is a 21% active solution of sodium m-nitrobenzene sulfonate (SMNBS) in water, in the form of a clear yellow liquid. This product is used in used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continu...voir plus Reservol Liquid is a 21% active solution of sodium m-nitrobenzene sulfonate (SMNBS) in water, in the form of a clear yellow liquid. This product is used in used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. voir moins | |
| Reservol Powder | Tiarco Chemical | Reservol Powder is a technically pure sodium m-nitrobenzene sulfonate (SMNBS) in the form of a yellow to tan powder. This product used in textile printing, colored bleach goods, reactive dyeing, and oxidation in baths and continuous equipment. | |
| RHODOLINE® FT 100 | Univar Solutions | RHODOLINE® FT 100 is a unique APE-free and solvent-free additive utilized to improve freeze-thaw stability primarily in low Tg latex binders as well as low to zero VOC waterborne paints formulated with these binders. Additional benefits include improved g...voir plus RHODOLINE® FT 100 is a unique APE-free and solvent-free additive utilized to improve freeze-thaw stability primarily in low Tg latex binders as well as low to zero VOC waterborne paints formulated with these binders. Additional benefits include improved gloss, pigment dispersion and stain resistance. voir moins | |
| Sipomer® COPS 3 | Rhodia Solvay Group | SIPOMER COPS 3 is an anionic co-polymerizable stabilizer that is used to improve the latex stability. When this product is used, the usage level of conventional surfactant can often be reduced. The recommended usage level of SIPOMER COPS-3 is in the range...voir plus SIPOMER COPS 3 is an anionic co-polymerizable stabilizer that is used to improve the latex stability. When this product is used, the usage level of conventional surfactant can often be reduced. The recommended usage level of SIPOMER COPS-3 is in the range of 0.5-1.0% (based on total monomers) for most of latex applications. voir moins | |
| Sipomer® COPS I | Rhodia Solvay Group | ||
| SpeedBlock 770 | Sartomer Americas | SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end applica...voir plus SpeedBlock 770 is a low molecular weight, easily dispersed, hindered amine light stabiliser (HALS) for use in polymer processing, coatings and adhesives. SpeedBlock 770 is typically used at 0.1 - 0.5% depending on the processing conditions and end application. voir moins | |
| Strodex™ FT-428 Surfactant | Ashland | Strodex™ FT-428 is a neutralized surfactant based on phosphate ester. It is designed to impart superior stability to latex paints, including mechanical as well as freeze-thaw stability. Depending on the formulation specifics, Strodex™ FT-428 surfactant ca...voir plus Strodex™ FT-428 is a neutralized surfactant based on phosphate ester. It is designed to impart superior stability to latex paints, including mechanical as well as freeze-thaw stability. Depending on the formulation specifics, Strodex™ FT-428 surfactant can also function as a strong wetting agent and dispersant aid and help reduce pigment flocculation. This product does not contain any alkyl phenol ethoxylates (APEOs). voir moins | |
| TEGO® Powder Aid D01 | Evonik Operations GmbH, BL Coating Additives | TEGO® Powder Aid D01 is a solid multifunctional polymeric additive for powder coatings. It provides pigment wetting, reduced melt viscosity, improved gloss, and leveling. | Request Sample |
| Trixene AS | Baxenden Chemicals Ltd. | Trixene AS is a mono-functional isocyanate derivative for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. | |
| Trixene ASF | Baxenden Chemicals Ltd. | Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces o...voir plus Trixene ASF is a mono-fnctional isocyanate derivative that is a hydrogen scavenger, for PU prepolymer systems. It is widely used as an in-can moisture scavenger and stabilizer. It neutralizes any amine and free hydroxyl groups present and removes traces of water. Trixene ASF is a faster-reacting and more efficient alternative based on p-toluenesulphonyl isocyanate (PTSI). voir moins | |
| Valida L, 3% | Sappi Biotech | Valida L, 3% is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by ...voir plus Valida L, 3% is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by paint, coating and inks industries: in-can stability, sagging & leveling balance, cracking during drying, open time. The highly shear thinning profile makes Valida suitable for different processes, including spraying. voir moins | |
| Valida S171C | Sappi Biotech | Valida S171C is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by ...voir plus Valida S171C is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by paint, coating and inks industries: in-can stability, sagging & leveling balance, cracking during drying, open time. The highly shear thinning profile makes Valida suitable for different processes, including spraying. voir moins | |
| Valida S191C | Sappi Biotech | Valida S191C is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida is stable in a wide pH range (1-13) and to...voir plus Valida S191C is highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida is stable in a wide pH range (1-13) and towards high electrolytes concentration. In HI&I application, it functions as a rheology modifier and thixotropic agent, modifying the viscosity and effectively providing properties such as flow control. The highly shear thinning profile makes Valida suitable for different processes, including spraying. voir moins | |
| Valida S231C | Sappi Biotech | Valida S231C is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by ...voir plus Valida S231C is a highly fibrillated cellulose manufactured by Sappi, 100% natural and VOC- free. It is a pre- hydrated multifunctional bio-based additive with unique rheology profile and thixotropic nature. Valida can help solve many challenges faced by paint, coating and inks industries: in-can stability, sagging & leveling balance, cracking during drying, open time. The highly shear thinning profile makes Valida suitable for different processes, including spraying. voir moins | |
| W-SUPRA RA-05 | Wana Química | W-SUPRA RA-05 is a mixed composition of mineral additives produced with delamination, which after due processing, are micronized, classified and finally activated through accurate ultramicronization processes. It was specially developed for the segment of...voir plus W-SUPRA RA-05 is a mixed composition of mineral additives produced with delamination, which after due processing, are micronized, classified and finally activated through accurate ultramicronization processes. It was specially developed for the segment of paints and coatings, which helps in stabilizing, preventing sedimentation and syneresis. voir moins | |
| W-SUPRA RA-07 | Wana Química | W-SUPRA RA-07 is a mixed composition of mineral additives produced by delamination, that after proper processing, are micronized and classified and finally activated by an ultra-precise micronization processes. It is used as a stabilizer in paints and co...voir plus W-SUPRA RA-07 is a mixed composition of mineral additives produced by delamination, that after proper processing, are micronized and classified and finally activated by an ultra-precise micronization processes. It is used as a stabilizer in paints and coatings, and helps to avoid sedimentation and syneresis. It was developed especially for use in acrylic and PVA applications, textures. This product considerably increases water resistance and consequently improves the absorption rate. voir moins | |
| WorléeAdd 410 N | Worlée-Chemie G.m.b.H. | WorléeAdd 410 N is a special viscosity stabilizer and anit-gelling agent for solvent based air drying and stoving paints. W´Add 410 N can be added to the ready paint. The concentration may vary from 0.5 - 2% calculated on total formulation. This product i...voir plus WorléeAdd 410 N is a special viscosity stabilizer and anit-gelling agent for solvent based air drying and stoving paints. W´Add 410 N can be added to the ready paint. The concentration may vary from 0.5 - 2% calculated on total formulation. This product is soluble with aromates, aliphates, ketones and alcohols. voir moins |
