| Aluminum Primer/B3320 | Tianjin Boyuan New Materials Co., Ltd. | Aluminum Primer B3320 is a kind of waterbased primer which was applied for PET film Aluminum pretreatment. Consists of two components A and B, It can increase the surface tension of PET film, and the adhesion between Aluminum layer and PET film. | |
| DOWSIL™ Z-6137 Silane | Dow Performance Silicones Paints, Inks and Coatings | Dow Corning® Z-6137 Silane is an aqueous solution of a homopolymer of an aminofunctional silane. It should be used as an additive or primer in water-based systems to improve bonding between organic binder and inorganic substrate. | |
| Anti-static Primer/B3320K | Tianjin Boyuan New Materials Co., Ltd. | B3320K is a kind of water based primer which was research and developed especially for film/sheet anti-static. It can provide long lasting Dissipative function, effective prevention of electrostatic accumulation. | |
| Adhesion Reinforcing Primer/B3325 | Tianjin Boyuan New Materials Co., Ltd. | B3325 is a kind of water based primer which was especially for film/sheet adhesion reinforcing. It can improve surface performance and ensure excellent adhesion between the coating and the base material. | |
| Special-Primer PP 3200 W | Worlée-Chemie G.m.b.H. | Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brown...voir plus Special-Primer PP 3200 W is an aqueous primer and adhesion promoter developed to solve adhesion problems with critical substrates like polyolefinic plastics and blends. This grade has a non-volatile content of 30% ± 1.5. It appears as a low viscous, brownish turbid liquid. Special-Primer PP 3200 W can be used as adhesion promoter by incorporation in adhesives, inks and paints in case of sufficient compatibility or diluted down to 10% solid content as primer. voir moins | |
| Stainban® 185 | WPC Technologies, Inc. | Stainban® 185 is an aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 17.5-19.0% and a specific gravity of 1.27-1.35 g/cm3. It is most commonly used in water-based primer applications intended for w...voir plus Stainban® 185 is an aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 17.5-19.0% and a specific gravity of 1.27-1.35 g/cm3. It is most commonly used in water-based primer applications intended for wood protection. voir moins | |
| Stainban® 186 | WPC Technologies, Inc. | Stainban® 186 is a zinc-free, odorless, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 41-43% and a specific gravity of 1.5-1.6 g/cm3. It is most commonly used in water-based primer applications. | |
| Stainban® 187 | WPC Technologies, Inc. | Stainban® 187 is a zinc free, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 28-36% and a specific gravity of 1.37-1.41 g/cm3. It is most commonly used in water-based primer applications intended...voir plus Stainban® 187 is a zinc free, aqueous tannin stain inhibitor additive in a clear liquid form. This product has a total solids content of 28-36% and a specific gravity of 1.37-1.41 g/cm3. It is most commonly used in water-based primer applications intended for wood protection. voir moins | |
| PAT-ADD AF 31 | Patcham USA | PAT-ADD AF 31 is an easy dispersed defoamer for use in waterborne coatings, aqueous inks and pigment dispersions. PAT-ADD AF 31 is an oil-free defoamer based on an organically modified polysiloxane. Although specially developed for use in low pigmented pa...voir plus PAT-ADD AF 31 is an easy dispersed defoamer for use in waterborne coatings, aqueous inks and pigment dispersions. PAT-ADD AF 31 is an oil-free defoamer based on an organically modified polysiloxane. Although specially developed for use in low pigmented paints and varnishes, PAT-ADD AF 31 is versatile in application. It is a highly efficient defoamer and anti-foaming additive for waterborne during manufacturing and application. Main benefits are: easily dispersible, highly effective anti-foaming agent requiring low dosage, and clear liquid with excellent shelf stability. voir moins | Request Sample |
| PAT-ADD DA 817 | Patcham USA | PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particula...voir plus PAT-ADD DA 817 is a wetting, dispersing and anti-sedimentation additive for a wide variety of industrial paints. The product is solvent-free and applicable for waterborne, solvent-borne and solvent-free paint, inks and pigment dispersions. It is particularly effective as anti-settling agent for silica-based matting agents and as an anti-sedimentation agent in aqueous primers. Main benefits are: highly effective dispersant for acidic pigments, including silica and carbon black, optimizes milling operation, enabling higher pigment loading, wide range compatibility, in solvent-borne, solvent-free and most waterborne systems, excellent performances in stabilizing silica-matting agents, and prevents hard sedimentation in waterborne as well as solvent-borne primers. voir moins | Request Sample |
| 3# Water-Based Sealing Coating | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | 3# Water-Based Sealing Coating is a transparent coating. It is used as a coating for its transparency, and adhesion. It is commonly used in various kinds of primer and does not change the properties of the primer. | |
| ASCONIUM® 143 | ASCOTEC | ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins. | Request Sample |
| HALOX® 430 | ICL Phosphate Specialty | HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scav...voir plus HALOX® 430 by ICL is the newest generation, non-toxic, heavy metal-free, calcium phosphate-based anti-corrosive pigment. It is designed for use in waterborne and solvent-borne protective coating systems. It is based on a unique synergy between an ion scavenging and passivation mechanism. It is used in solvent-based moisture cure polyurethanes, short-, medium- & long oil alkyds & silicones, and water-based polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. HALOX® 430 is recommended for long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate is of concern. The dosage level for solvent-borne and waterborne 2K epoxy, alkyds & modified alkyds polyurethane is 6-10% & 3-6% respectively, for waterborne acrylic copolymer is 3-5%, and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. voir moins | Request Sample |
| ASCOTRAN® H10 | ASCOTEC | ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion ...voir plus ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). voir moins | Request Sample |
| Anquamine® 287 Waterborne Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer...voir plus Anquamine® 287 a novel water-based epoxy curing agent designed for use in two part epoxy systems with standard liquid and modified liquid epoxy resins without the addition of emulsifiers. Its appearance is amber to greenish liquid. Anquamine® 287 based primers exhibit excellent adhesion to green concrete and penetration properties that outperform other water-based curing agent technology. It also can be formulated into a cementitious epoxy floor with excellent moisture permeability and thermal shock resistance. Applications can include, cementitious epoxy flooring, primer/sealer for green concrete, concrete curing compound and primer for old and new concrete. voir moins | Request Sample |
| ALBIDUR® PU 5640 | Evonik Operations GmbH, BL Coating Additives | ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good prese...voir plus ALBIDUR® PU 5640 is a white liquid used in the primer/filler and top coat for waterborne, solventborne, and solvent-free 2-pack component polyurethane formulations. This product has an excellent increased tear and impact resistance. It also has good preservation of network density and no change in mechanical properties. ALBIDUR® PU 5640 has reduced cure shrinkage, improved dirt shedding, and barrier properties against water and diluted acids. voir moins | Request Sample |
| ASCONIUM® 142DA | ASCOTEC | ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins. | Request Sample |
| ASCONIUM® 114 | ASCOTEC | ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins. | Request Sample |
| HALOX® SW-111 | ICL Phosphate Specialty | HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne...voir plus HALOX® SW-111 by ICL is a zinc-free, strontium phosphosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection in high-performance resins. It is a non-refractive grade that is used in protective coating systems. It maintains a higher level of in-can stability. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, polyurethane dispersions, and acrylics. The dosage level is 5-10% based on the total formula weight. Synergistic properties have been found [in the areas of corrosion and humidity resistance] when HALOX® SW-111 is used in combination with HALOX® Zinc phosphate [1:1 ratio] in some waterborne systems. It has a shelf life of 36 months. voir moins | Request Sample |
| HALOX® 515 | ICL Phosphate Specialty | HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers,...voir plus HALOX® 515 by ICL is an aminocarboxylate salt-based, liquid organic corrosion inhibitor for high gloss (direct-to-metal) coating systems. It is effective as a flash rust inhibitor on weld seams. It is suitable for water-based acrylic DTM, acrylic primers, polyurethane, water-dispersible alkyds, and water-reducible alkyds. It provides cost-effective flash rust protection and long-term corrosion protection. It is also effective for thin film applications (<2 mils). HALOX® 515 is heavy metal- & nitrite-free and contains no chromates or phosphates. It provides improved adhesion at the scribe and good humidity resistance. It can be easily and effectively post-added or added in the letdown stage of any coating system. The dosage level of the grade is 1-3% based on the total formula weight. It has a shelf life of 24 months. voir moins | Request Sample |
| ASCOTRUST® X4 | ASCOTEC | ASCOTRUST® X4 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in Direct To Metal waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| Amirez 148/010 | Incorez Ltd. | Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primer...voir plus Amirez 148/010 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features a long pot life, low viscosity, zero VOC, and good freeze/thaw stability. It is completely compatible with cement and calcium salt and is particularly well suited for high temperature climates. Incorez 148/010 is used fro floor and wall paints, hygiene coatings, concrete primers, and gloss paints. voir moins | |
| SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment | Univar Solutions | SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment. This product is mainly used for water-b...voir plus SHIELDEX® AC 5 Non-Toxic Anti-Corrosion Pigment is a calcium ion-exchanged amorphous silica appearing as a white, free flowing powder. It is an easily dispersible, non-toxic, high performance anti-corrosion pigment. This product is mainly used for water-borne paint systems, general industrial coatings, maintenance and protective coating applications and automotive paints. voir moins | |
| TEGO® Wet 270 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 270 is a highly effective substrate wetting additive. It is a clear liquid polyether siloxane copolymer with excellent anti-crater effect with flow promotion in waterborne, solventborne, and radiation-curing formulations. TEGO® Wet 270 is suitab...voir plus TEGO® Wet 270 is a highly effective substrate wetting additive. It is a clear liquid polyether siloxane copolymer with excellent anti-crater effect with flow promotion in waterborne, solventborne, and radiation-curing formulations. TEGO® Wet 270 is suitable for clear coat, radiation-curing, pigmented, and waterborne systems. It can be used in both the primer/basecoat and the topcoat for lacquer coats. It is recommended that the addition of this product to the coating be at the let-down stage and as supplied. voir moins | Request Sample |
| ASCOTRUST® X1 | ASCOTEC | ASCOTRUST® X1 is a liquid, tannic acid free, rust-converting additive for waterborne coatings. It is mainly used in waterborne paints to enable the direct application on rust or poorly prepared surfaces. | Request Sample |
| HALOX® CW-491 | ICL Phosphate Specialty | HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primer...voir plus HALOX® CW-491 by ICL is a low-cost, moderate solubility calcium phosphosilicate-based corrosion inhibiting pigment. It is designed to provide mid-level corrosion protection. It is suitable for solvent-based epoxy, epoxy ester, and short-, medium- & long oil alkyds. It is also suitable for water-based epoxy, wash primers, direct-to-metal finishes, 2k solvent-based epoxies, water-reducible alkyds, acrylics, polyvinyl chloride resins, and polyesters. HALOX® CW-491 is a white, non-refractive, zinc-, & heavy metal-free grade that is used for protective coating systems. The dosage level of the grade is 5-8% based on the total formula weight for water-based systems and 7-12% based on the total formula weight for solvent-based systems. It has a shelf life of 36 months. voir moins | Request Sample |
| ASCOTRAN® H17 | ASCOTEC | ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash ...voir plus ASCOTRAN® H17 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products (paints, cleaners, wood treatment, maintenance products, etc...). voir moins | Request Sample |
| TEGO® Wet 251 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 251 is a universal substrate wetting additive. It is a liquid polyether siloxane copolymer. This product is suitable for clear coat, pigmented, and waterborne systems. TEGO® Wet 251 can be used in the primer/basecoat and the topcoat for lacquer ...voir plus TEGO® Wet 251 is a universal substrate wetting additive. It is a liquid polyether siloxane copolymer. This product is suitable for clear coat, pigmented, and waterborne systems. TEGO® Wet 251 can be used in the primer/basecoat and the topcoat for lacquer coats. Addition of this product to the coating can be as supplied or as a predilution. voir moins | Request Sample |
| HALOX® 570 | ICL Phosphate Specialty | HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primer...voir plus HALOX® 570 by ICL is an organic corrosion inhibitor. It is designed for use in water-based industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces. It is an environmentally-friendly, nitrite-free, phosphate-free, and heavy metal-free, which can provide synergy with inorganic anti-corrosives. It is especially effective along weld seams and in some cases, can also be used in solvent-based coatings and in UV-cured systems. It is used in both water-based primers and direct-to-metal topcoats and has minimal effect on gloss reduction. HALOX® 570 can be used in formulations based on water-based acrylic latexes and co-polymers, styrene/acrylic latexes, acrylated epoxy esters, thin films, 2-pack epoxy systems, alkyds, alkyd/acrylic blends, and 1 or 2 pack polyurethane. It has a shelf life of 36 months. voir moins | Request Sample |
| Nubirox FR-10 | Ferro Pigments | Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapo...voir plus Nubirox FR-10 is a nitrite-based liquid inhibitor for preventing flash rusting of waterborne systems without negatively impacting long term anticorrosion performance of the Coating. It is effective at very low concentrations and shows activity in the vapour and liquid phase. voir moins | |
| Nubirox 106 | Ferro Pigments | Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such a...voir plus Nubirox 106 is a labeling-free, white Anticorrosive pigment. It is an Organophilized Zinc Phosphate-Molybdate that exhibits excellent performance and cost efficiency in solventborne and waterborne systems, being suitable for thin film applications (such as Coil Coatings). voir moins | |
| Loxanol® MI 6730 | BASF Formulation Additives | Loxanol® MI 6730 is an aqueous solution of a cationic polymer used as primer in coating applications, where it does improve adhesion to the substrate. Especially in UV- curing systems, which often exhibit poor adhesion because of volume shrinkage, conside...voir plus Loxanol® MI 6730 is an aqueous solution of a cationic polymer used as primer in coating applications, where it does improve adhesion to the substrate. Especially in UV- curing systems, which often exhibit poor adhesion because of volume shrinkage, considerable improvements can be obtained by using Loxanol® MI 6730 as a primer. voir moins | |
| Delaphos® 4 | Delaphos | Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...voir plus Delaphos® 4 is a tetrahydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 4 is also effective in water based systems. voir moins | |
| Delaphos® 2 | Delaphos | Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. ...voir plus Delaphos® 2 is a dihydrate form of zinc phosphate with a mean particle size of 8 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2 is also effective in water based systems. voir moins | |
| Delaphos® 2M | Delaphos | Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resin...voir plus Delaphos® 2M is a dihydrate form of zinc phosphate with a mean particle size of 7.5 microns. It is used in anti-corrosive paint primer systems, especially with those based on solvent borne epoxy-polyamide, chlorinated rubber, alkyd, and polyurethane resins. Delaphos® 2M is also effective in water based systems. voir moins | |
| Dynasylan® HYDROSIL 2627 | Evonik Operations GmbH, BL Silanes | Dynasylan® HYDROSIL 2627 is a water-borne amino-functional silane and alkyl-functional silane. It is comonly used as a wash primer to treat metals before coatings with another coating system. Corrosion protection can often be achieved. | |
| HALOX® BW-191 | ICL Phosphate Specialty | HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solven...voir plus HALOX® BW-191 by ICL is a corrosion-inhibiting pigment used in protective primer coating systems. It is barium phosphosilicate-based, white, non-refractive grade, and is an organic surface-treated version of HALOX®BW-111. It is recommended for most solvent-based and waterborne systems such as latexes and water reducible due to its lower oil absorption. HALOX® BW-191 can also be effective in anti-corrosive high solids coatings. The dosage level of the grade is 5-10% based on the total formula weight. It has a shelf life of 36 months. voir moins | Request Sample |
| Dynol™ 604 Surfactant | Evonik Operations GmbH, BL Coating Additives | Dynol™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants...voir plus Dynol™ 604 Surfactant is a low-VOC, low foam, nonionic wetting agent ideal for high-performance waterborne applications. This wetting agent has the ability to reduce both equilibrium and dynamic surface tension to a degree not found with other surfactants. A 100% active liquid. Typical applications include, wood coatings, printing inks, concrete sealers, floor polishes, leather coatings, metal/plastic primer and topcoats, architectural paints, pressure-sensitive adhesives and more. voir moins | Request Sample |
| ORDISOL SWT-45 | Concentrol, S.A., Productos | ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer...voir plus ORDISOL SWT-45 is a silicone additive of universal application with good effectiveness against the formation of craters and improvement in the surface slip. It improves sliding, fluidity and has a good anti-crater effect. Suitable for solvent based and water based systems, varnishes, pigmented systems. Especially recommended for finishing lacquers and suitable for primer coatings. voir moins | |
| MONORAL® 420-20 | HS CHEM CO.,LTD | MONORAL® 420-20 is a light yellow hard paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic pa...voir plus MONORAL® 420-20 is a light yellow hard paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint, and industrial coating systems. voir moins | |
| MONORAL® 60X | HS CHEM CO.,LTD | MONORAL® 60X is a hard light yellow paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint...voir plus MONORAL® 60X is a hard light yellow paste of polyolefin wax dispersed in xylene to provide anti-settling and anti-hard caking with stability of pigment suspension in non-aqueous coatings. This product is used in oil-based paint, wash primer, traffic paint, enamels, and industrial coating systems. voir moins | |
| TEGO® Wet 280 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 280 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid polyether siloxane copolymer with good compatibility and good atomization with spray applications in co-solvent containing formulations. TEGO® Wet 280 is suitable for clear coat, pigmented, and waterborne systems and can be used in the primer...voir plus TEGO® Wet 280 is a highly effective substrate wetting additive with good flow promotion. It is a clear liquid polyether siloxane copolymer with good compatibility and good atomization with spray applications in co-solvent containing formulations. TEGO® Wet 280 is suitable for clear coat, pigmented, and waterborne systems and can be used in the primer/basecoat and the topcoat for lacquer coats. It is recommended that at the let-down stage, TEGO® Wet 280 be added to the coating as supplied. voir moins | Request Sample |
| Coadis™ 144 A | Arkema Rheology & Specialty Additives | Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized...voir plus Coadis™ 144 A is a universal pigment dispersant which provides outstanding performance accross a broad spectrum of waterborne exterior and interior coating formulations. It exhibits excellent stability and compatibility and is designed to enable maximized gloss potentien which providing ideal viscosity, flow and wet adhesion from flat to high gloss systems. voir moins | |
| TEGO® Wet 510 | Evonik Operations GmbH, BL Coating Additives | TEGO® Wet 510 is a substrate wetting additive with excellent flow promotion. It is a highly dynamic, clear liquid non-ionic organic surfactant with low foam and and is silicone-free. TEGO® Wet 510 is universally applicable and has good reduction of dynamic surface tension. It is suitable for waterborne, clear coat, and pigmented systems. It is used in both the primer...voir plus TEGO® Wet 510 is a substrate wetting additive with excellent flow promotion. It is a highly dynamic, clear liquid non-ionic organic surfactant with low foam and and is silicone-free. TEGO® Wet 510 is universally applicable and has good reduction of dynamic surface tension. It is suitable for waterborne, clear coat, and pigmented systems. It is used in both the primer/basecoat and the topcoat of lacquer coats. Addition of this product is recommended as supplied and is suitable for addition during the let-down stage. voir moins | Request Sample |
| HALOX® 430 JM | ICL Phosphate Specialty | HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic...voir plus HALOX® 430 JM by ICL is a new generation heavy metal-free corrosion inhibitor designed for waterborne and solvent-borne protective coating systems. It is a jet-milled version of the patented calcium phosphate and ion exchange technology. It is a non-toxic, anti-corrosive pigment. It is based on the synergy between an ion scavenging and passivation mechanism. HALOX® 430 JM is recommended for use in long-term applications where the use of heavy metals such as zinc, strontium, barium, molybdenum, and chromate is of concern. It is suitable for epoxy esters, moisture-cure polyurethanes, short-, medium- & long oil alkyds, and silicones. It can also be used in clear-, powder-, aerospace- & coil coatings and wash & etch primer. It offers significant advantages such as thin film applications (<10 microns), easier to disperse, cleaner grinds, and improved efficiency. The dosage level for the coating systems such as water- & solventborne 2K epoxy is 2-6% & 8-12% & for alkyds, modified alkyds, and 2K polyurethane is 2-6% & 6-10% respectively, for waterborne acrylic copolymer is 2-5% and for solvent-borne polyester melamine/TGIC is 6-9%. It has a shelf life of 36 months. voir moins | Request Sample |
| Anquamine® 287 Curing Agent - Fast One-Day Flooring System on to Concrete | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without ...voir plus Anquamine® 287 curing agent is a water-based epoxy curing agent based on a Mannich base adduct specifically developed for concrete primer applications including green concrete. It is designed for use with standard and modified liquid epoxy resins without the addition of emulsifiers. Anquamine® 287 curing agent based primers exhibit excellent adhesion to concrete and penetration properties that out perform other conventional curing agent technology. The product is VOC free and supports low emission applications. voir moins | Request Sample |
| Coadis™ 790 | Arkema Rheology & Specialty Additives | Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, n...voir plus Coadis™ 790 is a high molecular weight wetting and dispersing agent for water-based industrial & architectural coatings, inks and pigment concentrates. It is supplied as a solution of block copolymer with pigment anchorage groups. It is a low viscosity, non-ionic, and APEO-, VOC- and solvent-free grade. voir moins | |
| HALOX® 550 | ICL Phosphate Specialty | HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primer...voir plus HALOX® 550 by ICL is an inorganic-organic hybrid sol-gel corrosion inhibitor that protects water-based and solvent-based coatings. It can boost the adhesion of the systems through the development of a sol-gel network and the formation of hydrophobic nano-domains within the coating. It is suitable for clear coats, direct-to-metal, latex primers, thin film coatings, acrylic emulsions, water-dispersible alkyds, alkyd emulsions, polyesters, epoxy, urethane, and high gloss coatings. It is easy to disperse, post-addable, and reduces white rust on galvanized and black rust on Galvalume™. It offers increased hydrophobicity, improved anti-fingerprint, and no effect on gloss. It provides reduced silver, aluminum oxidation and high-temperature stability. HALOX® 550 is non-flammable, pH stable, and has a low freeze point. It is a temporary rust inhibitor for cold-rolled steel, blasted steel, and aluminum. It can impart corrosion resistance to final metal rinsing solutions. The dosage level for water-based acrylic is 1-4%, alkyd is 0.5-2%, epoxy is 1-4%, urethane is 0.5-3%, hybrids & others is 0.5-4%. It has a shelf life of 12 months. voir moins | Request Sample |
| HALOX® SZP-391 JM | ICL Phosphate Specialty | HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the s...voir plus HALOX® SZP-391 JM by ICL is a non-refractive, most efficient, and versatile corrosion inhibitive pigment designed for long-term corrosion protection. It is used in protective coating systems. It is a jet-milled version of HALOX® SZP-391. It contains the same proprietary blend of strontium and zinc phosphosilicates as HALOX® SZP-391 at reduced particle size. It provides easy dispersion, cleaner grinds and improved efficiency. It is recommended for water- & solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyurethane- & alkyd dispersions, water-reducible alkyds, chlorinated polymers, acrylics, polyesters and silicones. It offers increased ease of incorporation. HALOX® SZP-391 JM is designed for use in thin film (<25 microns) and clear coats (<10 microns). It is designed for use in latexes, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. voir moins | Request Sample |
| HALOX® CW-291 | ICL Phosphate Specialty | HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer...voir plus HALOX® CW-291 by ICL is calcium borosilicate-based corrosion inhibiting pigment. It is designed for long-term corrosion protection where heavy metals are a concern. It is used in solvent-based epoxy esters, polyurethanes and short-, medium- & long oil alkyds, and water-based epoxies, water-reducible alkyds, and alkyd dispersions. It has the lowest oil absorption. It is recommended for use in protective coating systems. HALOX® CW-291 is specifically suggested for high solids, medium gloss topcoats, DTM (direct-to-metal) finishes, and self-priming systems. Recommended dosage level is 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat & DTM finishes. It has a shelf life of 36 months. It is compliant with ASTM D4288-83, specification for calcium borosilicate pigment type 1, Class B. voir moins | Request Sample |
| HALOX® SZP-391 | ICL Phosphate Specialty | HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-base...voir plus HALOX® SZP-391 by ICL is a non-refractive, most efficient, and versatile corrosion-inhibiting pigment designed for long-term corrosion protection of coatings systems. It is a blend of strontium and zinc phosphosilicates. It is recommended for solvent-based epoxies, epoxy esters, polyurethanes, short-, medium- & long oil alkyds (both traditional and high solids), polyesters, and silicones. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, chlorinated polymers, and acrylics. It is designed for use in high acid value resins, latexes, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-391 make it the pigment of choice in thin film applications (<1 mil or 25 microns). The dosage level is 2-5% based on total formula weight in many water-based systems and 3-7% based on total formula weight in traditional solvent-based coatings. It has a shelf life of 36 months. voir moins | Request Sample |
| HALOX® CW-22/221 | ICL Phosphate Specialty | HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer...voir plus HALOX® CW-22/221 by ICL is a white, non-refractive, calcium borosilicate-based corrosion inhibiting pigment for protective coating systems. It is suitable for water-based epoxies, polyurethanes, polyurethane dispersions, water-reducible alkyds, and alkyd dispersions. It is designed for long-term corrosion protection where the use of heavy metals is discouraged. It is recommended for use in primer systems based on traditional solvent alkyd technology. Recommended dosage level is 9-15% based on total formula weight with PVC level in the range of 42-47%. It has a shelf life of 36 months. HALOX® CW-22/221 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 1, Class A. voir moins | Request Sample |
| Methyltriethoxysilane | Zhejiang Wynca Chemical Industry Group | Methyltriethoxysilane is a colorless clear liquid used as a water repellant and primer for hard coating of plastic and synthesis for cross-linked resin. | |
| Aqueous Aminoalkyl Silicone Solutions | Dalian Onichem Co., Ltd. | Aqueous Aminoalkyl Silicone Solutions is used for waterborne coatings, adhesives, sealants and primers. | Request Sample |
| Amirez 148/024 | Incorez Ltd. | Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primer...voir plus Amirez 148/024 is a reactive polyamine adduct curing agent for epoxy resins. It will emulsify most liquid epoxy resins. It will also crosslink epoxies by chemical reaction to yield tough durable polymers. This product features low viscosity, zero VOC, and good freeze/thaw stability. It has fast cure and excellent gloss retention and chemical resistance. Incorez 148/024 is used for floor and wall paints, anti-graffiti coatings, concrete primers, and gloss paints. voir moins | |
| TEGO® Phobe 6510 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 6510 is a formulation of a polysiloxane resin / silane-blend for waterborne impregnations and primers. | Request Sample |
| HALOX® CW-2230 | ICL Phosphate Specialty | HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in ...voir plus HALOX® CW-2230 by ICL is calcium borosilicate-based corrosion-inhibiting pigment. It is engineered for long-term corrosion protection where the use of heavy metal-containing corrosion inhibitors is a problem. It is a white, non-refractive pigment used in protective coating systems. It is suitable for solvent-based epoxies, moisture-cure polyurethanes, polyesters, silicone, water-based epoxy, polyurethane dispersions, water-reducible alkyds, alkyd dispersions, and acrylics. It has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds and epoxy-esters. Recommended dosage levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%. It has a shelf life of 36 months. HALOX® CW-2230 is compliant with ASTM D4288-83, specification for calcium borosilicate pigment Type 2. voir moins | Request Sample |
| HALOX® Z-PLEX 750 | ICL Phosphate Specialty | HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primer...voir plus HALOX® Z-PLEX 750 by ICL is a hybrid corrosion inhibitor combining organic and inorganic inhibitor synergies. It offers improved humidity resistance and wet adhesion. It contains 80% less zinc compounds than traditional zinc phosphate with enhanced performance due to the addition of organic functionality. It is suitable for solvent-based epoxies, epoxy esters, short-, medium- & long oil alkyd, and polyesters. HALOX® Z-PLEX 750 is used in water-based epoxies, water-reducible alkyd, alkyd dispersions, and acrylics. It is designed for coatings and primers on metal surfaces to cost-effectively provide the traditional function of an inorganic corrosion inhibitor with the benefits of an organic corrosion inhibitor. It possesses excellent passivation, outstanding blister resistance, and enhanced barrier properties. Recommended dosage level is 3-7% based on total formulation weight. It has a shelf life of 36 months. voir moins | Request Sample |
| HEUCOPHOS® ZMP | Heucotech Ltd./Heubach | HEUCOPHOS® ZMP is a basic zinc molybdenum orthophosphate hydrate. Excellent results have been achieved by applying this anticorrosive pigment in water based coating systems using one-part polyurethanes. This product has a pH level of 5.5-7.5, a density of...voir plus HEUCOPHOS® ZMP is a basic zinc molybdenum orthophosphate hydrate. Excellent results have been achieved by applying this anticorrosive pigment in water based coating systems using one-part polyurethanes. This product has a pH level of 5.5-7.5, a density of typ. 4.0g/cm^3, and a conductivity of max. 250μS/cm. voir moins | Request Sample |
| Anquamine® 419 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 c...voir plus Anquamine® 419 waterborne curing agent is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine® 419 curing agent delivers excellent properties in anticorrosive primers, white gloss enamels and clear coats. It can be used with different solid epoxy resin dispersions depending upon the properties desired. voir moins | Request Sample |
| TEGO® Phobe 6600 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 6600 is a white liquid emulsion of a polysiloxane resin/silane-blend for waterborne impregnations and primers for neutral and slightly alkaline substrates. This product has an excellent hydrophobing effect. It also has a water beading effect, ...voir plus TEGO® Phobe 6600 is a white liquid emulsion of a polysiloxane resin/silane-blend for waterborne impregnations and primers for neutral and slightly alkaline substrates. This product has an excellent hydrophobing effect. It also has a water beading effect, early water resistance, and a low tendency to pick up dirt. voir moins | Request Sample |
| Anquamine® 728 | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Anc...voir plus Anquamine® 728 waterborne curing agent is a multi-purpose curing agent for use in concrete primers and topcoats, and delivers fast cure speed at low temperature (10˚C) and high humidity (up to 85% RH). It can be used with solid epoxy resin dispersion, Ancarez® AR 555, and standard liquid epoxy resin. voir moins | Request Sample |
| RHEOLATE® 266 | Elementis | RHEOLATE® 266 is based on a new waterborne polyether urea polyurethane polymer. The activity has been engineered to provide highly efficient thickening at low- to medium-shear rates and shear-thinning viscosity. This is ideal for spray-applied or doctor- ...voir plus RHEOLATE® 266 is based on a new waterborne polyether urea polyurethane polymer. The activity has been engineered to provide highly efficient thickening at low- to medium-shear rates and shear-thinning viscosity. This is ideal for spray-applied or doctor- blade-applied systems such as industrial topcoats and primers; furniture and wood lacquers; maintenance paints; adhesives. voir moins | |
| K-FLEX® 850S Low-VOC Coalescent | LANXESS (former Emerald Performance Materials) | K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and indus...voir plus K-FLEX® 850S is economical to use and tailored to provide good handling and excellent compatibility in waterborne systems. It is highly recommended for direct-to-metal coatings such as primers, interior and exterior latex paints, floor polishes, and industrial and protective coatings. It is also effective in nitrocellulosic and acrylic lacquers. Emerald Kalama Chemical was acquired by LANXESS in 2021. voir moins | |
| BECKOCURE™ EH 2260w/41WA | Allnex | BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corr...voir plus BECKOCURE™ EH 2260W/41WA is a hydrophobic amine hardener recommended for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions, fast drying primers and monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. This product shows excellent application behavior and very robust performance even on poorly prepared surfaces. voir moins | Request Sample |
| Silane Coupling Agent KH-550 | Zhejiang Feidian Chemical Co., Ltd. | KH-550 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. It reacts with water. Take precautions to avoid contact with atmospheric moisture. It is a superior adhesion promoter in RTV silicones and other hybrid sealants. It is also an useful component in primer...voir plus KH-550 is a versatile amino-functional coupling agent used over a broad range of applications to provide superior bonds between inorganic substrates and organic polymers. The silicon-containing portion of the molecule provides strong bonding to substrates. The primary amine function reacts with a wide array of thermoset, thermoplastic, and elastomeric materials. It reacts with water. Take precautions to avoid contact with atmospheric moisture. It is a superior adhesion promoter in RTV silicones and other hybrid sealants. It is also an useful component in primer systems for hybrid and polyurethane sealants. voir moins | |
| CYMEL® 325 | Allnex | CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primer...voir plus CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings. voir moins | Request Sample |
| EXOCOAT™ ACX-W | Axcentive Sarl | EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer...voir plus EXOCOAT® ACX-W by Axcentive is a water-dilutable nanoparticle-modified anticorrosive conversion coating that covalently bonds to the surface through nanoparticles. It is applied directly to metals (iron alloy, galvanized steel, phosphate steel, stainless steel, and aluminum). It converts the metal hydroxide surface into a stable, inert covalently bound monolayer. It is used as a replacement for chromium-based primers on aluminum and other metals. It can be used as a conversion primer for a coating system based on an epoxy coating and polyurethane topcoat. It may omit toxic chemicals and functions as a replacement for Cr3+ and Cr6+-based systems used in metal plating and aerospace industries. EXOCOAT® ACX-W is applied with conventional low-pressure and high-pressure airless and air-mix spraying, dipping, rolling and brushing. It has a shelf life of 12 months. voir moins | |
| Nubirox SP | Ferro Pigments | Nubirox SP is a unique, special particle Zinc Phosphate. It is a white Anticorrosive pigment with high specific surface, much more efficient than conventional Zinc Phosphate. | |
| Coadis™ BR 85 | Arkema Rheology & Specialty Additives | Coadis™ BR 85 is a unique dispersant solution deflocculation and steric stabilisation of Titanium Dioxide and other fine high value pigments. It is based on Coatex proprietary Bumper Technology™. | |
| Coapur™ XS 71 | Arkema Rheology & Specialty Additives | Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits vi...voir plus Coapur™ XS 71 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It combines high in-can viscosity with excellent pigment compatibility with a unique pseudoplastic rheology profile. Its use limits viscosity drop after pigment paste addition, eliminates pigment flooding and floating during storage and enables to match excellent results based on rub-out test. voir moins | |
| Coapur™ 2025 | Arkema Rheology & Specialty Additives | Coapur™ 2025 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It is designed to interact stringly with the binder of the formulation, in order to control the rheology at high shear rates. | |
| Borchi® Gel LW 44 | OMG Borchers GmbH | Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primer...voir plus Borchi® Gel LW 44 is a non-ionic, polyurethane-based thickener glycol ether-free, VOC-free according to the European Directives 1999/13/EC and 2004/42/EG. It is manufactured using aliphatic isocyanates; it has thus no negative influence on yellowing and chalking of coating film. Even small amounts of Borchi® Gel LW 44 bring about significant thickening of the aqueous phase. The resulting liquid is pseudoplastic, i.e. its viscosity is inversely proportional to its shear rate. Borchi® Gel LW 44 is therefore particularly suitable for low-viscosity applications such as spraying and dip-coating of waterborne and water-emulsifiable paint systems (finishing paints and primers), aqueous two-component polyurethane-based systems and two-component epoxy systems and polyester systems. lt can also be used for copolymer dispersions depending on the requirements profile. Particularly advantageous in this context is its effect on viscosity under low-shear conditions. voir moins | |
| Drewplus™ TS-4385 Foam Control Agent | Ashland | Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primer...voir plus Drewplus™ TS-4385 Foam Control Agent is designed for use in coatings and printing inks. This product is particularly recommended for wood coatings, semi-gloss, high-gloss architectural paints and parquet lacquers. Excellent results have also been obtained in acrylic anti-corrosive primers, flexographic printing inks and water-reducible alkyd based systems. This product is highly efficient and exhibits excellent persistence. voir moins | |
| HEUCORIN® RZ | Heucotech Ltd./Heubach | HEUCORIN® RZ is a zinc-5-nitroisophthalate, an effective organic inhibitor based on the zinc salt of an organic nitro compound, for use as an organic corrosion inhibitor for the application in Protective Coatings. This product has a moisture content of 5%...voir plus HEUCORIN® RZ is a zinc-5-nitroisophthalate, an effective organic inhibitor based on the zinc salt of an organic nitro compound, for use as an organic corrosion inhibitor for the application in Protective Coatings. This product has a moisture content of 5%, an organic content of typ. 49%, and a water-soluble chloride of max. 0.025%. By adding very small quantities of HEUCORIN® RZ and HEUCOPHOS® pigments and thus taking advantage of unique organic-norganic synergies, it is possible to improve existing protective coatings to some significant extent. voir moins | Request Sample |
| Coapur™ XS 83 | Arkema Rheology & Specialty Additives | Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resist...voir plus Coapur™ XS 83 is a solvent-free and APEO free pure associative polyurethane thickener (also called HEUR, NISAT or NSAT). It provides an exceptional pseudoplastic behaviour with very limited effect on high shear viscosities. It imparts very good sag resistance, sprayability and good compromise in terms of flow and leveling. voir moins | |
| Coadis™ 123 K | Arkema Rheology & Specialty Additives | Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-born...voir plus Coadis™ 123 K is a synthetic dispersant based on an acrylic copolymer with an Hydrophobic character. It is a versatile dispersing agent which provides easy fillers and pigments dispersion, good storage stability and improved water resistance to water-borne systems. voir moins |
