| Hauthane L-3225 | Hauthaway | Hauthane L-3225 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. ...voir plus Hauthane L-3225 is a hard, co-solvent free, aliphatic, polyester polyurethane dispersion. This is a self-coalescing version of HD-4675. It was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood. L-3225 can be used as supplied or blended with acrylic emulsions for spray, dip or rotogravure applications. It can be thickened with associative thickeners for knife-over-roll or similar methods. voir moins | |
| Hauthane L-3310 | Hauthaway | Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrat...voir plus Hauthane L-3310 is a hard, self-coalescing, aliphatic, polyester-based, polyurethane dispersion with exceptional chemical and early water-resistance properties. It was designed for low VOC (<100 g/l) topcoat formulations used on a wide variety of substrates, including concrete, metal, plastic and wood. L-3310 is ideal for use in applications where excellent flow and leveling properties, and high levels of water- and chemical-resistance are required. L-3310 can be used as a sole vehicle or blended with acrylic emulsions for spray, brush or roller applications. Rheology modifications can be made with associative thickeners. voir moins | |
| Hauthane L-3415 | Hauthaway | Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include auto...voir plus Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. It is designed for UV-cured wood and plastic topcoat applications where highly chemical- and abrasion-resistant films are required. Potential end-use applications include automotive plastics, kitchen cabinets and wood flooring. L-3415 may be applied by spray or gravure methods. Films must be dried completely before UV energy cure. voir moins | |
| Hauthane L-3466 | Hauthaway | Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicon...voir plus Hauthane L-3466 is an aliphatic, silicone-modified, polyester-based, water-borne polyurethane dispersion. It was designed primarily for topcoat applications where slip and abrasion resistance properties are required. L-3466 contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including leather, plastics, metals and textiles. It also demonstrates exceptional dye transfer resistance in automotive leather seating and dry-erase, white board applications when crosslinked. L-3466 may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications. Rheology modifications can be made with associative thickeners for alternative application methods. voir moins | |
| HS9101 | Tianyi Chemical Engineering Material Co., Ltd. | HS9101, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic or wooden coatings. This product has a rapid cure with high flexibility. It shows good hardness and resistance to abrasion. | |
| HS9103 | Tianyi Chemical Engineering Material Co., Ltd. | HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good f...voir plus HS9103, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has good flowability and wetting characteristics. It shows high fullness and good flexibility. voir moins | |
| HS9104 | Tianyi Chemical Engineering Material Co., Ltd. | HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibilit...voir plus HS9104, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic top coatings, wooden paints, and paper varnishes. This product has a rapid cure with high gloss. It has a low shrinkage rate with high flexibility. voir moins | |
| HS9106 | Tianyi Chemical Engineering Material Co., Ltd. | HS9106, in the form of a transparent liquid, is a modified epoxy acrylate resin that can be used in plastic paints or wooden paints. This product has good flowability and wetting characteristics. It cures quickly with good flexibility. | |
| HS9501 | Tianyi Chemical Engineering Material Co., Ltd. | HS9501, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in plastic coatings, UV oil inks, and abrasion-resistant wood coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligom...voir plus HS9501, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in plastic coatings, UV oil inks, and abrasion-resistant wood coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. voir moins | |
| HS9502 | Tianyi Chemical Engineering Material Co., Ltd. | HS9502, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in plastic UV top finishes. This product is quite flexible and has low shrinkage. Its substrate is a high-performance oligomer ...voir plus HS9502, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in plastic UV top finishes. This product is quite flexible and has low shrinkage. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. voir moins | |
| HS9510 | Tianyi Chemical Engineering Material Co., Ltd. | HS9510, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in vacuum plating finishes, wood coatings, and metal coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that p...voir plus HS9510, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in vacuum plating finishes, wood coatings, and metal coatings. This product cures quickly and is resistant to yellowing. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. voir moins | |
| HS9545 | Tianyi Chemical Engineering Material Co., Ltd. | HS9545, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in metal or plastic spray coatings. This product is resistant to stains and abrasion. Its substrate is an oligomer that performs well in radiation or peroxid...voir plus HS9545, in the form of a transparent liquid, is an aliphatic urethane acrylate that can be used in metal or plastic spray coatings. This product is resistant to stains and abrasion. Its substrate is an oligomer that performs well in radiation or peroxide cure applications. voir moins | |
| HS9555 | Tianyi Chemical Engineering Material Co., Ltd. | HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof...voir plus HS9555, in the form of a transparent liquid, is a solventborne aliphatic urethane acrylate that can be used as a curing agent in BMC high-temperature resistant coatings, metal coatings, glass paints, and special plastic primers. This product is boil proof and plates easily. Its substrate is a high-performance oligomer that is designed for radiation and peroxide curing applications. voir moins | |
| HS9732 | Tianyi Chemical Engineering Material Co., Ltd. | HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provi...voir plus HS9732, in the form of a yellowish, transparent liquid, is a polyester acrylate resin that can be used in metal coatings, BMC high-temperature resistant coatings, glass paints, and plastic primers. This product has high viscosity and tack. It also provides a good balance between water and inks. voir moins | |
| Hydrorene 10 | S.A.P.I.C.I. SpA | Hydrorene 10 is a water-dispersible isocyanate. This product can be mixed with acrylic emulsions and polyurethane dispersion waterborne systems. It can be used as a hardener for 2K waterborne coatings with good chemical and abrasion resistance. | |
| Hydrorexin PU 5855 | S.A.P.I.C.I. SpA | Hydrorexin PU 5855 is a waterborne polyurethane dispersion based on polycarbonate. This product has good chemical and abrasion resistance with good pigment wetting. It can be used in 1K or 2K topcoats. It is particularly recommended for plastic and RIM...voir plus Hydrorexin PU 5855 is a waterborne polyurethane dispersion based on polycarbonate. This product has good chemical and abrasion resistance with good pigment wetting. It can be used in 1K or 2K topcoats. It is particularly recommended for plastic and RIM applications. voir moins | |
| IDROBEN PD 718 | Benasedo | IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBE...voir plus IDROBEN PD 718 is a special non-yellowing polymer modified with aliphatic isocyanate. It’s a fast drying anionic dispersion, endowed with good elasticity, adhesion and hardness. The binder needs cosolvent in order to achieve a good film formation. IDROBEN PD 718 is recommended for clear and pigmented topcoats, both for plastic, glass and metal substrates. It is very suitable to produce matt enamels for the decorative field, endowed with high superficial hardness. voir moins | |
| KONDICRYL SV 166 | Pidilite Industries Ltd. - Resins Division | KONDICRYL SV 166 gives glossy and flexible film that has good resistance to gasoline. It has broad compatibility with other coating vehicles such as nitrocellulose ,cellulose acetate butyrate & vinyls. KONDICRYL SV 166 can be used as a binder for general ...voir plus KONDICRYL SV 166 gives glossy and flexible film that has good resistance to gasoline. It has broad compatibility with other coating vehicles such as nitrocellulose ,cellulose acetate butyrate & vinyls. KONDICRYL SV 166 can be used as a binder for general purpose coatings for metals & plastics, high performance masonry coatings and auto refinish paints and inks. voir moins | |
| OTL-B-5 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...voir plus OTL-B-5 is a high quality concentrated aqueous pigment dispersion, pigment type of Carbon Black, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| OTL-BE-50 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...voir plus OTL-BE-50 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| OTL-BE-51 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...voir plus OTL-BE-51 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Blue, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| OTL-G-49 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings,...voir plus OTL-G-49 is a high quality concentrated aqueous pigment dispersion, pigment type of Phthalo Green, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| OTL-R-52 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, c...voir plus OTL-R-52 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Red, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| OTL-R-57 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...voir plus OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| OTL-W-58 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...voir plus OTL-R-57 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| OTL-Y-53 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...voir plus OTL-Y-53 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| OTL-Y-54 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings...voir plus OTL-Y-54 is a high quality concentrated aqueous pigment dispersion, pigment type of Organic Yellow, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| OTL-Y-55 | Quaker Color (a Division of McAdoo & Allen, Inc.) | OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, co...voir plus OTL-Y-55 is a high quality concentrated aqueous pigment dispersion, pigment type of Iron Oxide, with zero VOC, good heat resistance, glycol free, and more. It is designed to be used in a variety of water based industrial coatings, such as ink coatings, coatings for plastics, architectural coatings, latex products, and water based general industrial coatings. voir moins | |
| Picassian® AC-191 | Stahl Polymers | Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resi...voir plus Picassian® AC-191 is a waterbased anionic styrene acrylic copolymer emulsion agent. It is used in consumer electronics, metallic coatings, and in general plastic applications. This product is brittle, has good adhesion on ABS and PS, has good scratch resistance properties, good alcohol resistance, has good hand cream resistance, is stable with treated aluminium flakes, and provides clear, very hard, and glossy films. voir moins | |
| Picassian® PU-551 | Stahl Polymers | Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing pr...voir plus Picassian® PU-551 is a film forming, semi-aliphatic, polyether modified polyurethane resin. It is used in sole binder inks, high speed flexo printing, and print plastics. This product has no webbing effect, has good adhesion properties, good dispersing properties, good wetting properties, good flow properties, good flexibility properties, and good blocking resistance properties. voir moins | |
| Polurene MT 100 | S.A.P.I.C.I. SpA | Polurene MT 100 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 100 LLV | S.A.P.I.C.I. SpA | Polurene MT 100 LLV is an HDI trymer. This product is designed for non-yellowing systems. It can be used in 2K enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Polurene MT 75 | S.A.P.I.C.I. SpA | Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints a...voir plus Polurene MT 75 is an aliphatic polyisocyanate. This product is designed for non-yellowing systems with improved performance. In particular, it can be used in combination with hydroxide acrylic resins and saturated polyesters in order to make 2K paints and enamels for metal, wood and plastics. This product contains less than .2% HDI isocyanates. voir moins | |
| Polurene MT 90 | S.A.P.I.C.I. SpA | Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanat...voir plus Polurene MT 90 is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low viscosity 2K paints and enamels for metal, wood and plastics, all of which contain high solids. This product contains less than .2% HDI isocyanates. voir moins | |
| Polurene MT 90 AB | S.A.P.I.C.I. SpA | Polurene MT 90 AB is an HDI trymer. This product is designed for non-yellowing systems. It can be used in low-viscosity 2K paints and enamels for metal, wood and plastics that contain high solids. This product contains less than .2% HDI isocyanates. | |
| Relca® PU-968 | Stahl Polymers | Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion p...voir plus Relca® PU-968 is an aqueous, anionic dispersion of an aliphatic polyester urethane. It is used in plastic coatings, flexible plastic topcoats, and leather finishing. This product is NMP free, NEP free, has good water resistance properties, good adhesion properties, and is crosslinkable at room temperature with polycarbodiimides. voir moins | |
| Rexin DP 412 | S.A.P.I.C.I. SpA | Rexin DP 412 is a slightly branched solventless saturated polyester resin. This product has high chemical resistance and good elasticity. It can be used in coatings and enamels for metal, plastic, wood and rubber. | |
| Rexin DP 417 | S.A.P.I.C.I. SpA | Rexin DP 417 is a solventless saturated polyester resin. This product has good elasticity. It can be used in enamels and coatings for paper, leather, plastic and rubber. It is particularly used for the formation of soft-touch effect coatings. | |
| Rexin DP 430 | S.A.P.I.C.I. SpA | Rexin DP 430 is a solventless saturated polyester resin. This product has good elasticity. It can be used in coatings and enamels for leather, plastic, rubber and paper coatings. It is used to formulate soft-touch effect coatings. | |
| Sarbox SB401 | Sartomer Americas | Sarbox SB401 is a highly functional, carboxylic acid and anhydride containing methacrylate oligomer, blended in ethyl-3-ethoxy propionate (EEP) solvent. It offers fast cure speed and excellent copper adhesion. It has a high acid number for alkali strippab...voir plus Sarbox SB401 is a highly functional, carboxylic acid and anhydride containing methacrylate oligomer, blended in ethyl-3-ethoxy propionate (EEP) solvent. It offers fast cure speed and excellent copper adhesion. It has a high acid number for alkali strippability. Sarbox SB401 also provides good solvent and acid resistance and excellent high gloss aqueous development. Suggested applications of this product include metal, plastic and wood coatings, inks, and solder masks and photoresists for electronics. voir moins | |
| Sarbox SB405 | Sartomer Americas | Sarbox SB405 is a clear liquid highly functional, carboxylic acid and anhydride containing acrylate oligomer blended in PM acetate solvent. This product offers good adhesion and dual cure with a fast cure response. It also has high flexibility, low shrink...voir plus Sarbox SB405 is a clear liquid highly functional, carboxylic acid and anhydride containing acrylate oligomer blended in PM acetate solvent. This product offers good adhesion and dual cure with a fast cure response. It also has high flexibility, low shrinkage, and good heat, water, and chemical resistance. Sarbox SB405 is suggested for etch, plate resists, and solder masks for electronics and coatings for wood and plastic applications. voir moins | |
| Sarbox SB510E35 | Sartomer Americas | Sarbox SB510E35 is a moderately functional, carboxylic acid and anhydride containing methacrylate oligomer, ethoxylated trimethylolpropane triacrylate monomer. It offers excellent cure speed, excellent adhesion to metal and plastics, good wetting and flow...voir plus Sarbox SB510E35 is a moderately functional, carboxylic acid and anhydride containing methacrylate oligomer, ethoxylated trimethylolpropane triacrylate monomer. It offers excellent cure speed, excellent adhesion to metal and plastics, good wetting and flow characteristics. Sarbox SB510E35 also has excellent thin film adhesion to electrocoated steel. Suggested applications of this product include adhesives, plastisols, screen, flexo, and gravure inks, and paper, plastic, metal, and wood coatings. voir moins | |
| Sarbox SB520E35 | Sartomer Americas | Sarbox SB520E35 is a moderately functional, carboxylic acid containing acrylate oligomer tripropylene glycol diacrylate monomer. Reactive solids of this product are 100%. Sarbox SB520E35 offers one of the fastest cure rates in the Sarbox product line, exc...voir plus Sarbox SB520E35 is a moderately functional, carboxylic acid containing acrylate oligomer tripropylene glycol diacrylate monomer. Reactive solids of this product are 100%. Sarbox SB520E35 offers one of the fastest cure rates in the Sarbox product line, excellent adhesion to metals and plastics, and good wetting and flow characteristics. It also offers high impact strength and flexibility as well as good chemical, water, and heat resistance. Other suggested applications for this product include ink applications, wood and paper coatings, and photoresists/solder masks for electronics. voir moins | |
| Sarbox SB520M35 | Sartomer Americas | Sarbox SB520M35 is a moderately functional, carboxylic acid containing acrylate oligomer tripropylene glycol diacrylate monomer. Sarbox SB520M35 offers one of the fastest cure rates in the Sarbox product line, excellent adhesion to metals and plastics, an...voir plus Sarbox SB520M35 is a moderately functional, carboxylic acid containing acrylate oligomer tripropylene glycol diacrylate monomer. Sarbox SB520M35 offers one of the fastest cure rates in the Sarbox product line, excellent adhesion to metals and plastics, and good wetting and flow characteristics. It also offers high impact strength and flexibility as well as good chemical, water, and heat resistance. Other suggested applications for this product include screen, flexo, and gravure inks, wood and paper coatings, and photoresists/solder masks for electronics. voir moins | |
| SILIKOPUR® 8081 | Evonik Operations GmbH, BL Coating Additives | SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, a...voir plus SILIKOPUR® 8081 is a silicone modified polyurethane dispersion. It provides a water-beading effect, offers extremely high flexibility, good recoatability, and good air-drying. This product is suitable for waterborne, clear coat, pigmented, direct grind, and 2-pack coatings. voir moins | Request Sample |
| SP-121 | NuSil Silicone Technology 1 | SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of t...voir plus SP-121 is a specially formulated silicone primer that is designed to be used with one and two-part RTV systems. This primer is red in color and provides an easy visual determination of surface coverage when using it. It will also improve the adhesion of the RTV systems to various substrates such as glass, metals, rigid plastics, and ceramics. voir moins | |
| SP-124 | NuSil Silicone Technology 1 | SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates s...voir plus SP-124 is a silicone primer that is designed for use with condensation cured systems where conventional silicone primers are ineffective. This product will help to improve the adhesion of one and two-part condensation cured systems to various substrates such as glass, ceramics, metal, rigid plastics, wood and some composites. It can be applied by wiping, brushing or dipping a uniform thin film onto the substrates. voir moins | |
| SP-270 | NuSil Silicone Technology 1 | SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to additi...voir plus SP-270 is a silicone primer that was specifically designed for use with platinum-cured systems where other conventional primers are insufficient. It is a one-component primer supplied in VM&P Naphtha so it requires no mixing at all. When applied to addition-cured systems with iridite coated materials, it will improve the adhesion. This also holds true with other substrates including glass, metals, some plastics and other silicone materials. voir moins | |
| SP1-204 | NuSil Silicone Technology 1 | SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various subs...voir plus SP1-204 is a specially formulated translucent primer that is designed for use with one and two-part RTV systemts. This primer requires no mixing and air dries. It is an ideal product to help improve the adhesion of one and two-part systems to various substrates such as glass, metals, plastics, ceramics and wood. voir moins | |
| STANLUX® Gold 2000 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is r...voir plus STANLUX® Gold 2000 is a coarse bronze powder pigment constituted by lamellar particles of copper, zinc and aluminium alloys covered with stearic acid. This pigment is used in decorative paints and is recommended for applications where high brilliance is required. STANLUX® Gold 2000 is available in several shades and has an average size of 50 microns. voir moins | |
| STANLUX® Silver 2210 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an a...voir plus STANLUX® Silver 2210 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2210 has an average particle size of 60 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver 2240 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an a...voir plus STANLUX® Silver 2240 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 2240 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver 3201 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...voir plus STANLUX® Silver 3201 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3201 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. voir moins | |
| STANLUX® Silver 3301 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...voir plus STANLUX® Silver 3301 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3301 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. voir moins | |
| STANLUX® Silver 3501 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...voir plus STANLUX® Silver 3501 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3501 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. voir moins | |
| STANLUX® Silver 3571 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX®...voir plus STANLUX® Silver 3571 is a non-leafing type aluminium pigment with narrowly curved lamellar particle distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3571 has an average particle size of 23 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. voir moins | |
| STANLUX® Silver 3701 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...voir plus STANLUX® Silver 3701 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3701 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. voir moins | |
| STANLUX® Silver 3711 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STA...voir plus STANLUX® Silver 3711 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect and is recommended in formulations that require a coarse aluminium pigment with high metallic effect. STANLUX® Silver 3711 has an average particle size of 17 microns and can be used in auto parts paints, automotive paints (original and refinish), plastic coatings, and printing inks. voir moins | |
| STANLUX® Silver 3871 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an aver...voir plus STANLUX® Silver 3871 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require high hiding power. STANLUX® Silver 3871 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver 3891 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property....voir plus STANLUX® Silver 3891 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require the highest hiding power and clear colour property. STANLUX® Silver 3891 has an average particle size of 11 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R2970 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Sil...voir plus STANLUX® Silver R2970 is a non-leafing type aluminium pigment with coarse lamellar particles that presents a metallic effect. It is recommended in formulations for double layer systems that require aluminium pigment with high metallic effect. STANLUX® Silver R2970 has an average particle size of 32 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R3270 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an av...voir plus STANLUX® Silver R3270 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3270 has an average particle size of 25 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R3370 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an ave...voir plus STANLUX® Silver R3370 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3370 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R3500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an ave...voir plus STANLUX® Silver R3500 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3500 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R3670 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an ave...voir plus STANLUX® Silver R3670 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3670 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R3770 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 ha...voir plus STANLUX® Silver R3770 is a non-leafing type aluminium pigment with medium, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3770 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R3870 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has ...voir plus STANLUX® Silver R3870 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended in formulations that require a high metallic effect. STANLUX® Silver R3870 has an average particle size of 13 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R4100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...voir plus STANLUX® Silver R4100 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4100 has an average particle size of 64 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R4112 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...voir plus STANLUX® Silver R4112 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4112 has an average particle size of 45 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R4114 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metal...voir plus STANLUX® Silver R4114 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4114 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R4200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...voir plus STANLUX® Silver R4200 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4200 has an average particle size of 40 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® SIlver R4500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differ...voir plus STANLUX® Silver R4500 is a non-leafing type aluminium pigment with coarse, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance, double layer systems that require differentiated metallic effect. STANLUX® Silver R4500 has an average particle size of 28 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R4700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...voir plus STANLUX® Silver R4700 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4700 has an average particle size of 22 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R4800 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effe...voir plus STANLUX® Silver R4800 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4800 has an average particle size of 18 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R4850 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metalli...voir plus STANLUX® Silver R4850 is a non-leafing type aluminium pigment with fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver R4850 has an average particle size of 15 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R6200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an...voir plus STANLUX® Silver R6200 is a non-leafing type aluminium pigment with narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6200 has an average particle size of 29 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R6300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6300 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver...voir plus STANLUX® Silver R6300 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6300 has an average particle size of 21 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver R6400 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver R6400 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It has a differentiated metallic effect in whiteness and brilliance and is recommended for...voir plus STANLUX® Silver R6400 is a non-leafing type aluminium pigment with medium-fine, narrowly curved lamellar particle size distribution that presents a metallic effect. It has a differentiated metallic effect in whiteness and brilliance and is recommended for industrial paints that require high metallic effect. STANLUX® Silver R6400 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver SD7100 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7100 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...voir plus STANLUX® Silver SD7100 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7100 has an average particle size of 34 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver SD7200 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7200 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...voir plus STANLUX® Silver SD7200 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7200 has an average particle size of 33 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver SD7300 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7300 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems ...voir plus STANLUX® Silver SD7300 is a non-leafing type aluminium pigment with coarse, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7300 has an average particle size of 30 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver SD7450 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7450 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that req...voir plus STANLUX® Silver SD7450 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7450 has an average particle size of 24 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver SD7500 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7500 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that req...voir plus STANLUX® Silver SD7500 is a non-leafing type aluminium pigment with lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7500 has an average particle size of 22 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® Silver SD7700 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® Silver SD7700 is a non-leafing type aluminium pigment with medium-fine, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance sys...voir plus STANLUX® Silver SD7700 is a non-leafing type aluminium pigment with medium-fine, lenticular shape particles and narrow distribution curves. This pigment is considered to be a "silver dollar" grade and is recommended for application in high performance systems that require differentiated metallic effect. STANLUX® Silver SD7700 has an average particle size of 20 microns and can be used in auto parts paints, automotive paints (original and refinish), and plastic coatings. voir moins | |
| STANLUX® SIlver VAP10 | Aldoro Indústria de Pós e Pigmentos Metálicos Ltda | STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average...voir plus STANLUX® SIlver VAP10 is an extra-fine, non-leafing aluminium grade produced by metallization and is known as “VMP or vacuum metallized pigment”. It is recommended for coatings requiring a mirror or chrome like finish. STANLUX® SIlver VAP10 has an average particle size and is used in decorative coatings for internal car parts, plastic coatings, and flexographic and gravure printing inks. voir moins | |
| TKA-66 | Hangzhou Tiankai (China) Enterprise Co., Ltd. | TKA-66 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good gloss hardness and pigment dispersion while providing good chemical and weather resistance. It is commonly used in a variety of appli...voir plus TKA-66 is a solid thermoplastic acrylic resin that is soluble in ester, ketone, and aromatics. This product features good gloss hardness and pigment dispersion while providing good chemical and weather resistance. It is commonly used in a variety of applications including inks, plastic paints, and container paints. voir moins | |
| UCECOAT® 6570 | Allnex | UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance ...voir plus UCECOAT® 6570 is a 3 functional aliphatic urethane acrylate oligomer diluted with 5% water. This water dilutable urethane acrylate is particularly useful in screen inks and varnishes for water based applications; giving good water- and solvent resistance after curing by ultraviolet light (UV) or electron beam (EB). voir moins | Request Sample |
| Ucopol M 4054 | S.A.P.I.C.I. SpA | Ucopol M 4054 is a moisture-curing prepolymer. This product dries quickly with good surface hardness, abrasion resistance and good brightness. It can be used in parquet or plastic coatings. This product contains less than .5% TDI isocyanates. | |
| Ucopol M 505 | S.A.P.I.C.I. SpA | Ucopol M 505 is a moisture-curing prepolymer. This product has good flexibility and weather resistance. It can be used in coatings for wood, plastics, concrete, rubber, textile fabrics, and leather. This product contains less than .5% TDI isocyanates. | |
| Ucopol W 708 | S.A.P.I.C.I. SpA | Ucopol W 708 is a moisture-curing prepolymer. This product has good chemical, weather, and yellowing resistance. It can be used in wood, plastic and concrete coatings. This product has less than .5% HDI isocyanates. | |
| WorléeCryl® 7135 | Worlée-Chemie G.m.b.H. | WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This gra...voir plus WorléeCryl® 7135 is a styrene acrylic copolymer emulsion. It is used for topcoats on metal, wood and plastics (PS, ABS). This product is also for temporary anti-corrosive primers on metal, and it can be combined with water thinnable alkyd resins. This grade is supplied in the form of 42% in water. voir moins | |
| WorléeCryl® A 1220 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 1220 is an acrylic resin that can be crosslinked with polyisocyanates. W´Cryl A 1220 is an acrylic copolymer for the manufacture of high quality plastic coatings. Due to good adhesion properties, this product is also suitable for paints on c...voir plus WorléeCryl® A 1220 is an acrylic resin that can be crosslinked with polyisocyanates. W´Cryl A 1220 is an acrylic copolymer for the manufacture of high quality plastic coatings. Due to good adhesion properties, this product is also suitable for paints on composite material, e.g. caravans, even on metal. voir moins | |
| WorléeCryl® A 2141 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstandi...voir plus WorléeCryl® A 2141 is an acrylic resin which can be crosslinked with polyisocyanates for the production of high quality industrial paints. Such two component lacquers are high-solid systems. Even when dried at room temperature, the coatings show outstanding gloss, hardness, chemical- and weather-resistance. Application fields for W´Cryl A 2141 are high solid paints for facade elements, caravans and plastics. voir moins | |
| WorléeCryl® A 2218 | Worlée-Chemie G.m.b.H. | WorléeCryl® A 2218 is a styrene acrylic resin which can be crosslinked with polyisocyanates. It is preferred for the formulation of very fast drying primers, fillers, and top coats for steel and plastics. This grade has a non-volatile content of 50% ± 1. | |
| WorléeThix A 1420 | Worlée-Chemie G.m.b.H. | WorléeThix A 1420 is a thixotropic, hydroxyfunctional pure acrylate for the manufacture of two component top coats. This grade has a non volatile content of 50% ± 2. W´Thix A 1420 can be combined for air and forced drying 2 pack wood and plastic coatings...voir plus WorléeThix A 1420 is a thixotropic, hydroxyfunctional pure acrylate for the manufacture of two component top coats. This grade has a non volatile content of 50% ± 2. W´Thix A 1420 can be combined for air and forced drying 2 pack wood and plastic coatings. After curing, the coating exhibits hardness, chemical and weather resistance. Application fields for W´Thix A 1420 are pigmented and colourless wood coating systems. In these coating formulations W´Thix A 1420 is used for adjusting the stability at vertical surfaces. voir moins | |
| WorléeThix A 2125 | Worlée-Chemie G.m.b.H. | WorléeThix A 2125 is a thixotropic, isocyanate crosslinkable acrylic resin. This grade has a non volatile content of 50% ± 2. W´Thix A 2125 can be crosslinked with aliphatic and aromatic polyisocyanates to formulate air and forced drying systems for metal...voir plus WorléeThix A 2125 is a thixotropic, isocyanate crosslinkable acrylic resin. This grade has a non volatile content of 50% ± 2. W´Thix A 2125 can be crosslinked with aliphatic and aromatic polyisocyanates to formulate air and forced drying systems for metal, wood and plastics. The aliphatic system shows excellent hardness, good chemical resistance and a good outdoor durability already at room temperature. W´Thix A 2125 is suitable for many industrial applications such as agricultural equipment, construction trucks, and plastic coatings. This product is also used to formulate decorative effect coatings voir moins | |
| WorléeThix A 2313 | Worlée-Chemie G.m.b.H. | WorléeThix A 2313 is a thixotropic acrylic resin which can be crosslinked with isocyanates. This grade has a non volatile content of 60 % ± 2. W´Thix A 2313 can be used as a sole binder or in combination with other hydroxy acrylates for the manufacture of...voir plus WorléeThix A 2313 is a thixotropic acrylic resin which can be crosslinked with isocyanates. This grade has a non volatile content of 60 % ± 2. W´Thix A 2313 can be used as a sole binder or in combination with other hydroxy acrylates for the manufacture of air and forced drying industrial paints. Even at room temperature paint films show high hardness, chemical resistance and very good weather resistance. Application fields for W´Thix A 2313 are coatings of front elements and plastic coatings. W´Thix A 2313 can also be used for formulating decorative effect finishes. voir moins | |
| XHG-9169 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless ...voir plus XHG-9169 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As a primerless adhesion, it can be applied to most non-porous siliceous material such as glass, tiles, ceramics, enamel and glazed tiles as well as impregnated, varnished or painted wood and some plastics. voir moins | |
| XHG-9179 Acid-Cure Silicone Sealant | Zhejiang Wynca Chemical Industry Group | XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. A...voir plus XHG-9179 Acid-Cure Silicone Sealant is a one-component, acid-cure silicone sealant used for general purpose do-it-yourself applications. This product cures at room temperature with an atmospheric moisture enabling a permanently flexible silicone rubber. As an adhesion, it can be applied to glass such as windows, glazed surfaces, ceramic tiles, and many plastics and paints. voir moins |
