ALKOMOL® E 10 | Indorama Ventures |
|
ALKOMOL® E 10 is a polyether formed by adding a chain of polypropylene in stearyl alcohol, which gives chemical stability higher than that of esters commonly used as emollients. Because of its degree of propoxylation, this product presents itself in the f...voir plus
ALKOMOL® E 10 is a polyether formed by adding a chain of polypropylene in stearyl alcohol, which gives chemical stability higher than that of esters commonly used as emollients. Because of its degree of propoxylation, this product presents itself in the form of oily liquid of low viscosity with excellent spreading and emollient power over the skin and hair. It is used in cosmetic formulation such as bath oils, sunscreens, hair products, lotions, and creams.
When applied as an emollient, ALKOMOL® E 10 provides excellent spread over the skin, lubricating it without leaving excess oil. Prevents and avoids drying of skin, leaving it soft. In sunscreens acts as a solvent of the active ingredient, and facilitate application (spreading) over the skin. It forms a protective film on the hair, protecting it from dryness caused by the presence of other solvents in these formulations. The presence of ALKOMOL® E 10 in deodorants and antiperspirants decreases the irritating effect of formulation, giving to the skin a pleasant feeling. voir moins
Compliance Highlights Unavailable
|
|
ULTRAPEG® 1000 | Indorama Ventures |
|
ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a wa...voir plus
ULTRAPEG® 1000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It is a solid, with an average molecular weight of 950-1050, a hydroxyl value of 107-118mg KOH/g, and a water content of 0.5% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for leathers, textiles, and paints. ULTRAPEG® 1000 may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps voir moins
Compliance Highlights Available
|
|
ULTRAPEG® 1500 F | Indorama Ventures |
|
ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value...voir plus
ULTRAPEG® 1500 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 1350-1595, a hydroxyl value of 70-83mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for leathers, detergents, lubricants, textiles, and paints. ULTRAPEG® 1500 F may also be formulated in creams, lotions, and moisturizers, cream without rinsing for hair, deodorants, products for skin treatment and soaps, products for makeup (lipsticks, shadows, foundations) and toothpastes. voir moins
Compliance Highlights Available
|
|
ULTRAPEG® 200 | Indorama Ventures |
|
ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 5...voir plus
ULTRAPEG® 200 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 190-210, a hydroxyl value of 535-590mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for leathers, detergents, lubricants, and paints. ULTRAPEG® 200 may also be used in bath oils, creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, hair spray and fragrances. voir moins
Compliance Highlights Available
|
|
ULTRAPEG® 300 | Indorama Ventures |
|
ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 3...voir plus
ULTRAPEG® 300 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 285-315, a hydroxyl value of 356-394mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for agrochemical, ceramic, leathers, lubricants, paints, textiles, and paints. ULTRAPEG® 300 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, shampoos, deodorant and hair spray. voir moins
Compliance Highlights Available
|
|
ULTRAPEG® 400 | Indorama Ventures |
|
ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 2...voir plus
ULTRAPEG® 400 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 380-420, a hydroxyl value of 267-295mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for agrochemical, rubber, ceramic, leathers, lubricants, textiles, and paints. ULTRAPEG® 400 may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations), shampoos, soaps and hair spray. voir moins
Compliance Highlights Available
|
|
ULTRAPEG® 4000 F | Indorama Ventures |
|
ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value ...voir plus
ULTRAPEG® 4000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 3600-4400, a hydroxyl value of 25-315mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for adhesives, agrochemical, rubber, ceramic, leathers, detergents and paints. ULTRAPEG® 4000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) leave in conditioners, deodorant, products for skin treatment and soap. voir moins
Compliance Highlights Available
|
|
ULTRAPEG® 600 | Indorama Ventures |
|
ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 17...voir plus
ULTRAPEG® 600 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of liquid at 25°C, with an average molecular weight of 570-630, a hydroxyl value of 178-197mg KOH/g, and a water content of 0.25% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency.
This product is ideally used for adhesives, agrochemical, leathers, detergents, lubricants, personal care, textiles, and paints. ULTRAPEG® 600 may also be used in creams, lotions and moisturizers, products for skin treatment, hair spray and soap. voir moins
Compliance Highlights Available
|
|
ULTRAPEG® 6000 F | Indorama Ventures |
|
ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value ...voir plus
ULTRAPEG® 6000 F is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 5400-6600, a hydroxyl value of 17-20mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points and hardness consistency. This product is ideally used for adhesives, agrochemical, rubber, ceramic, detergents and lubricants. ULTRAPEG® 6000 F may also be used in creams, lotions and moisturizers, products for makeup (lipsticks, shadows, foundations) and soap. voir moins
Compliance Highlights Available
|
|
ULTRAPEG® 8000 | Indorama Ventures |
ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of...voir plus
ULTRAPEG® 8000 is a hygroscopic polymer that is highly soluble in water due to the hydrophilic characteristic provided by the polyoxyethylene chain. It has an appearance of flakes at 25°C, with an average molecular weight of 7000-9000, a hydroxyl value of 12.5-16.0mg KOH/g, and a water content of 1.0% max. By varying the molecular weight, liquid or solid products can be obtained, covering a wide range of viscosity, melting points, and hardness consistency. This product is ideally used for adhesives, agrochemicals, rubber, ceramic, and detergents. ULTRAPEG® 8000 may also be used products for makeup (lipsticks, shadows, foundations). voir moins
Compliance Highlights Available
|