BYK®-306 | BYK | BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and...voir plus BYK®-306 is a solution of a polyether modified polydimethylsiloxane. This product is a highly effective silicone additive for the wetting of critical substrates. It improves dust and spray dust acceptance. BYK-306 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. voir moins | |
BYK®-313 | BYK | BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properti...voir plus BYK®-313 is a solution of a polyester-modified polydimethylsiloxane. is a strong, highly compatible silicone for solvent-borne and baking coating systems with the following properties: strong reduction of surface tension, very good anti-cratering properties, improves substrate wetting, improves flow and leveling of solvent-borne systems, very effective at low film thickness, increases gloss, strong increase of surface slip, FDA § 175.300 compliant, BYK-313 is a heat-resistant silicone due to the polyester modification, in baking systems, no loss in adhesion and no surface defects occur, no thermal decomposition at temperatures between 150°C and 230°C like polyether-modified silicones do, HAPS and aromatic-free. voir moins | |
BYK®-333 | BYK | BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties....voir plus BYK®-333 is a polyether modified polydimethylsiloxane. This product strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all coatings systems. In aqueous systems, it increases anti-blocking properties. BYK-333 displays excellent compatibility and can be used as an anti-cratering additive. voir moins | |
Efka® 3236 | BASF Formulation Additives | Efka® 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptan...voir plus Efka® 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. Efka® 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. voir moins | |
SCHWEGO® Foam 8336 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contain...voir plus SCHWEGO® Foam 8336 is a defoamer for water-based coating systems. It is VOC-free and biodegradable. SCHWEGO® foam 8336 destroys the air bubbles included in the system very fast, and foam at the surface of the paint disappears at once. This product contains a very compatible siloxane avoiding cratering, and in many coating systems it has a favourable influence on flow. SCHWEGO® foam 8336 defoams very well in all kinds of clear coatings and slightly pigmented systems, printing inks and UV-curing systems, especially those based on acrylics. The defoaming effect is also very good in wood varnishes and adhesives. voir moins | |
Siltech® C-7014 | Siltech Corp. | Siltech® C-7014 is a 100% active silicone hydride fluid that is primarily used to eliminate cratering. Siltech® C-7014 is used in solvent based coatings and inks formulations to eliminate cratering, reduce orange peel and eliminate fisheyes. It also preve...voir plus Siltech® C-7014 is a 100% active silicone hydride fluid that is primarily used to eliminate cratering. Siltech® C-7014 is used in solvent based coatings and inks formulations to eliminate cratering, reduce orange peel and eliminate fisheyes. It also prevents pigment floating and provides mar resistance. voir moins | |
WorléeAdd 311 (10% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems ...voir plus WorléeAdd 311 (10% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It improves mar-resistance and slip as well as reducing orange peel. W´Add 311 is an all purpose additive, effective in a wide variety of solvent-based systems including NC- and acid curing wood lacquers, yacht varnishes, parquet lacquers, paper coatings and leather finishes. W´Add 311 imparts mar-resistance to paint and lacquer surface, gives a smooth satin feel to the surface, improves flow-out, reduces orange-peel and Benard's cell effect. voir moins | |
WorléeAdd 311 (30% In Xylene) | Worlée-Chemie G.m.b.H. | WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surfa...voir plus WorléeAdd 311 (30% In Xylene) is a silicone based paint, lacquer, and leather finish additive. It increases the resistance of solvent based paints against mechanical damages by increasing surface smoothness. At the same time the flow is improved and surface imperfections like Benard's cells, brush marks etc. are avoided. Typical application fields are air drying alkyd resin paints for decorative, DIY and industrial application. voir moins | |
WorléeAdd 312 | Worlée-Chemie G.m.b.H. | WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to incr...voir plus WorléeAdd 312 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flow out, gloss and levelling and reducing orange peel and cratering. W´Add 315 is designed to increase the mar resistance of water and solvent based air drying and stoving paint films by reducing surface tension of the coating and imparting a high degree of slip and improving flow out. voir moins | |
WorléeAdd 315 | Worlée-Chemie G.m.b.H. | WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a cle...voir plus WorléeAdd 315 is a water soluble silicone paint additive, which is effective at low concentrations in improving substrate wetting, mar resistance and slip, flowout, gloss and levelling, and reducing orange peel and cratering. This product appears as a clear to slightly yellow liquid. voir moins | |
WorléeAdd 327 | Worlée-Chemie G.m.b.H. | WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total fo...voir plus WorléeAdd 327 is a silicone based paint additive mainly for solvent based and also water thinnable air drying and stoving coatings. W´Add 327 can be added to the ready paints or lacquers, typical concentration range from 0.1 - 1.5% (calculated on total formulation). voir moins | |
WorléeAdd 330 | Worlée-Chemie G.m.b.H. | WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended...voir plus WorléeAdd 330 is a silicone based paint additive mainly for water thinnable systems to eliminate surface imperfections and to improve wetting properties. W´Add 330 is a special additive for reducing the surface tension. The use of W´Add 333 is recommended when in water thinnable materials an additional butyl glycol content is undesirable. voir moins | |
WorléeAdd 356 | Worlée-Chemie G.m.b.H. | WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stovin...voir plus WorléeAdd 356 is a modified silicone solution used to improve the characteristics of solvent based paints, printing inks, and all kinds of wood and paper lacquers. It is also applied by curtain-coating. It is also recommended for decorative paints, stoving enamels and metallic car paints. W´Add 356 is thermostable. voir moins | |
XOANONS® WE-D557 | Anhui Xoanons Chemical Co., Ltd. | XOANONS® WE-D557 is a polyether siloxane copolymer for UV cure systems. It provides slight reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and...voir plus XOANONS® WE-D557 is a polyether siloxane copolymer for UV cure systems. It provides slight reduction of surface tension, reduces the friction coefficient, improves scratch resistance, and increases slip performance. This product imparts good recoating and minimal influence on the adhesion of coating films. It also offers excellent anti-cratering properties. Turbidity and viscosity may occur at low temperatures, and it becomes transparent and flowable after heating, which does not affect the quality of the products. voir moins |