| 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) | Hainan Zhongxin Chemical Co., Ltd. | 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) is a yellow to white crystalline powder that is 99% pure. It is primarily used as a light stabilizer, this product is an efficient UV radiation absorbing agent. UV-O is recomm...voir plus 2-(4,6-Bis-(2,4-Dimethylphenyl)-1,3,5-Triazin-2-Yl)-5-(Octylox Y)-Phenyl (UV-0) is a yellow to white crystalline powder that is 99% pure. It is primarily used as a light stabilizer, this product is an efficient UV radiation absorbing agent. UV-O is recommended for use in polyolefine, poyvinyl chlornamee, polystyrene etc. voir moins | |
| 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) | Hainan Zhongxin Chemical Co., Ltd. | 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) is a light yellow needle like powder that is 99% pure. This product is a light stabilizer capable of absorbing the UV radiation of 240-340 nm wavelength. It is widely applied to PE,PVC,PP,PS,PC organic glass, pol...voir plus 2–Hydroxy-4-n-octoxy-benzophenone (UV-531) is a light yellow needle like powder that is 99% pure. This product is a light stabilizer capable of absorbing the UV radiation of 240-340 nm wavelength. It is widely applied to PE,PVC,PP,PS,PC organic glass, polypropylene fiber, ethylene-vinyl acetate etc. voir moins | |
| 205 | U.S. Zinc | 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is a...voir plus 205 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, paint/coating, ceramics industries, rubber, and in those applications where reasonable purity is required. 205 is available in a pelleted form (205P) and with surface treatment (205S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 205H | U.S. Zinc | 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate...voir plus 205H is a small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the paint, latex, plastic, and zinc chemicals industries and in applications where moderate purity and greater reactivity are required. Grade 205H is available in a pelleted form (205HS) and with surface treatment (205HS). 205H has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 205HSA | U.S. Zinc | 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applica...voir plus 205HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a greater surface area and is used by the plastic, latex, and transparent rubber industries and in those applications where great reactivity is required. 205HSA is obtainable with surface treatment (205HSA-S). It has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (pounds/ft3). voir moins | |
| 205L | U.S. Zinc | 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger...voir plus 205L is a large particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. It has a lower surface area and is used by the paint and ceramics industries and in those applications where benefits result from larger than average particles. Grade 205L is available in a pelleted form (205LP) and with surface treatment (205LS). 205L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 205XL | U.S. Zinc | 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles....voir plus 205XL is a large particle size French Process in powder form, statistically measured zinc oxide. 205XL is used by the electronics, coating, ceramics, and paint industries and in those applications which develop benefits from larger than average particles. It has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. voir moins | |
| 210 | U.S. Zinc | 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake li...voir plus 210 is a French Process in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemicals, rubber, tape/adhesives, oil additives, traffic paint, wire insulation, glass/ceramics, electrogalvanizing, brake lining, and agriculture industries and in applications where General purpose zinc oxide could be used. 210 is available in a pelleted form (210P) and with surface treatment (210S). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 210E | U.S. Zinc | 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industrie...voir plus 210E is common purpose French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade is used in an assortment of applications, including electronics, brake lining, paint, zinc chemicals, coating, and rubber industries. 210E is available in pelleted form (210E-P) and with surface treatment (210ES). It has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 210H | U.S. Zinc | 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is availab...voir plus 210H is a small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the latex, paint, plastic, and zinc chemicals industries. 210H is available in a pelleted form (210HP) and with surface treatment (210HS). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 210HSA | U.S. Zinc | 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries an...voir plus 210HSA is an exceptionally small particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a higher surface area and reactivity and is used by the plastic, latex, and transparent rubber industries and in applications where high reactivity is required. 210HSA is available with surface treatment (210HSA-S). It has a surface area range of 8 to 10 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40. voir moins | |
| 210L | U.S. Zinc | 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with ...voir plus 210L is a large particle French Process, in powder form, statistically measured zinc oxide formed from zinc metal. This grade has a lower surface area and is used by the ceramics and paint industries. 210L is available in a pelleted form (210LP) and with surface treatment (210LS). It has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) | Hainan Zhongxin Chemical Co., Ltd. | 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) is a light yellow crystalline powder that is 99% pure. This product is a high-efficienct UV radiation absorbing agent, capable of effectively absorbing UV radiation of 29...voir plus 2,4-Bis(2,4-Dimethylphenyl)-6-(2-Hydroxy-4-Isooctyloxyphenyl )-1,3,5-Triazine (UV-9) is a light yellow crystalline powder that is 99% pure. This product is a high-efficienct UV radiation absorbing agent, capable of effectively absorbing UV radiation of 290-400 nm wavelength. It is applicable to paint and various plastic products, particular effective to polyvinyl chloirde, polystyrene, polyurethane and acrylic resins. voir moins | |
| 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) | North Wanxing Chemical Co., Ltd. | 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,...voir plus 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) is a hindered-amine light stabilizer intermediate that is a clear or yellowish liquid in appearance. This product is used to provide UV protection and stabilization in printing, paints and coatings. 4-Amino-2,2,6,6-Tetramethylpiperidine (TAD) has a boiling point of 188-189°C, gas chromatography content of 98% minimum, and a melting point of 16-18°C. voir moins | |
| AddWorks® LXR™ 308 AP | Clariant Plastics & Coatings Ltd. | AddWorks® LXR 308 AP is an optimized mixture of an UV absorber with radical scavenger (HALS), mostly suitable for low color solventborne clearcoats and UV cured coatings applicatons. | |
| AZO66 | U.S. Zinc | AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/c...voir plus AZO66 is an exceptionally pure French Process, in powder form, statistically measured zinc oxide formed from zinc metal. AZO66 provides greater color and is vastly efficient in white or light colored goods. This grade is used in the zinc chemical, paint/coating, ceramic, oil additive industries and in those applications where great purity is dire. Grade AZO66 is available in a pelleted form (AZO66P), in a treated pelleted form (AZO66PT), and with surface treatment (AZO66T). AZO66 has a surface area range of 4.0 to 6.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| AZO66L | U.S. Zinc | AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than norma...voir plus AZO66L is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the zinc chemical, paint, and coating industries and in those applications which stem from greater than normal high purity particles. Grade AZO66L is available in a pelleted form (AZO66LP) and with the surface treatment (AZO66LT). AZO66L has a surface area range of 3.0 to 5.0 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 50 to 85. voir moins | |
| AZO66XL | U.S. Zinc | AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater tha...voir plus AZO66XL is an exceptionally pure French Process, a large particle, statistically measured zinc oxide formed from zinc metal. This grade is used by the electronic, ceramic, paint, and coating industries and in those applications which stem from greater than normal high purity particles. AZO66XL has a surface area range of 2.5 to 3.5 m2 /g, a specific gravity of 5.6, and an apparent density (in powder form) of 20 to 40 and (in pellet form) of 15 to 30. voir moins | |
| AZO77H | U.S. Zinc | AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those ap...voir plus AZO77H is an exceptionally pure powder, small particle size French Process, statistically measured zinc oxide formed from zinc metal. It is used for the manufacture of various chemicals, in the plastic, paint, latex, and coating industries and in those applications where high purity and reactivity is required. Grade AZO77H is available with surface treatment (AZO77HT). It has a surface area range of 6.0 to 8.5 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). voir moins | |
| AZO77HSA | U.S. Zinc | AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used...voir plus AZO77HSA is an exceptionally small particle size French Process in powder form, statistically measured zinc oxide formed from zinc metal. AZO77HSA was explicitly developed to have the highest viscosity, reactivity, purity, and fineness. This grade is used in can sealants, latex compounds, zinc chemicals, plastics, paint/coating, and in the food can liner coating industry where the particularly fine particles freely convert certain accessible soluble into white sulfide, thus avoiding discoloration of food from sulfides of tin or iron. AZO77HSA is available with surface treatment (AZO77HSA-T), has a surface area range of 8.0 to 10.0 m2 /g, a specific gravity of 5.6, and an apparent density of 20 to 40 (lbs. /cu. Ft.). voir moins | |
| Benzophenone | Chongqing Changfeng Chemical Co., Ltd. | Benzophenone is a white to whitish crystal or flake with a light odor. It is a photo-initiator and can be used in UV-curing applications such as inks and clear coatings. | |
| Benzophenone | LEHVOSS Group | Benzophenone are off-white flakes designed for UV light photopolymerisation of systems based on acrylic oligomers and monomers. The radical generation occurs via Hydrogen abstraction by the action of a co-initiator such as tertiary amines. This product is...voir plus Benzophenone are off-white flakes designed for UV light photopolymerisation of systems based on acrylic oligomers and monomers. The radical generation occurs via Hydrogen abstraction by the action of a co-initiator such as tertiary amines. This product is insoluble in water, and soluble in most common organic solvents, monomers, and oligomers for UV applications. The main suggested applications are in the manufacturing of OPV, coatings for flooring, printing inks, adhesives, and clear lacquers for wood, plastic, paper, metal, optical fibers. voir moins | |
| Chisorb® 292 | DBC Europe GmbH | Chisorb® 292 is a liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trappin...voir plus Chisorb® 292 is a liquid light stabilizer belonging to the class of hindered amine light stabilizers. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. This light yellowish liquid is suitable for coating applications such as: automotive coatings, coil coatings, wood strains or DIY paints, UV/EB coatings, one and two component PU, thermoplastic acrylics, thermosetting acryslics, alkyds, and polyesters, waterborne acrylics, phenolics, vinylics and UV curable acrylic. voir moins | |
| Chisorb® 523 | DBC Europe GmbH | Chisorb® 523 is a highly effective liquid light stabilizer with amino-ether function, which is different to the class of hindered amine light stabilizers preventing possible reaction with acidity filler, pigment or matrix. It provides outstanding light st...voir plus Chisorb® 523 is a highly effective liquid light stabilizer with amino-ether function, which is different to the class of hindered amine light stabilizers preventing possible reaction with acidity filler, pigment or matrix. It provides outstanding light stability to various coating applications and, in addition, gives long-term heat stability to coatings by a radical trapping mechanism similar to that of hinder phenol. Its effectiveness can be greatly enhanced by co-addition of UV absorbers or nickel-containing stabilizers. voir moins | |
| Chisorb® 5392 | DBC Europe GmbH | Chisorb® 5392 is a liquid UV absorber blended with HALS, particularly developed for coatings. This yellow to light brown liquid is very soluble in most organic solvents, which makes it particularly useful for automotive and industrial coatings. Chisorb® 5...voir plus Chisorb® 5392 is a liquid UV absorber blended with HALS, particularly developed for coatings. This yellow to light brown liquid is very soluble in most organic solvents, which makes it particularly useful for automotive and industrial coatings. Chisorb® 5392 is a liquid form at room temperature, which makes it much easier for handling than other benzotriazoles UV absorbers. It's broad UV absorption offers good protection of light sensitive base coats. voir moins | |
| Chisorb® 5530 | DBC Europe GmbH | Chisorb® 5530 is a liquid UV absorber of the hydroxyphenylbenzotriazole class particularly developed for coatings. This yellow to light amber liquid is very soluble in most organic solvents and is dispersible in aqueous systems, which makes it particularl...voir plus Chisorb® 5530 is a liquid UV absorber of the hydroxyphenylbenzotriazole class particularly developed for coatings. This yellow to light amber liquid is very soluble in most organic solvents and is dispersible in aqueous systems, which makes it particularly useful for automotive and industrial coatings. Chisorb® 5530 is a liquid form at room temperature which makes it much easier for handling than other benzotriazoles UV absorbers. Its broad UV absorption offers good protection of light sensitive base coats or substrates such as wood and plastics. voir moins | |
| Chisorb® 5571 | DBC Europe GmbH | Chisorb® 5571 is a liquid UV absorber of the hydroxyphenyl-benzotriazole class. It imparts good light stability to a variety of polymers during its use. Chisorb® 5571 features high compatibility in various substrates. It offers low volatility even at high...voir plus Chisorb® 5571 is a liquid UV absorber of the hydroxyphenyl-benzotriazole class. It imparts good light stability to a variety of polymers during its use. Chisorb® 5571 features high compatibility in various substrates. It offers low volatility even at high temperatures. It also exhibits high absorption and protection efficiency without imparting any yellowness to the protected substrate. Chisorb® 5571 can be applied in thermoplastic PUR, coating and integral foams, rigid and plasticized PVC, PVB, PMMA, PVDC, EVOH, EVA, hot cured unsaturated polyesters and spin finishes for PA, PET, PUR, and PP fibers. The clear viscous yellow liquid product is also suitable for latices, waxes, adhesives, styrene homo- and co-polymers, elastomers and polyolefins. voir moins | |
| Chisorb® 5582 | DBC Europe GmbH | Chisorb® 5582 is an ultraviolet light absorber for coatings. It belongs to the family of substituted benzotriazoles which protect against ultraviolet radiation. Chisorb® 5582 is a liquid in nature and is highly miscible in most monomers and oligomers, whi...voir plus Chisorb® 5582 is an ultraviolet light absorber for coatings. It belongs to the family of substituted benzotriazoles which protect against ultraviolet radiation. Chisorb® 5582 is a liquid in nature and is highly miscible in most monomers and oligomers, which makes it particular useful for automobile and industrial coatings. This product is a light yellow liquid. voir moins | |
| Chisorb® 593 | DBC Europe GmbH | Chisorb® 593 is a reactive absorber of the acrylic phenylbenzotriazole class, and it was developed specifically for improving compatibility, solubility, migration and reactivity properties. It is suggested to be added during the polymerization stage for a...voir plus Chisorb® 593 is a reactive absorber of the acrylic phenylbenzotriazole class, and it was developed specifically for improving compatibility, solubility, migration and reactivity properties. It is suggested to be added during the polymerization stage for acrylic resin, rubber and unsaturated polyester etc. This product appears as a light brown to yellow powder. voir moins | |
| Deuteron LE 50 UV | Deuteron | Deuteron LE 50 UV is a variant of Deuteron LE 100 LV, diluted in 50% DPGDA. Even in small amounts it considerably reduces the surface and volume resistances. Deuteron LE 50 UV is soluble in all conventional solvent mixtures used in the coating industry, p...voir plus Deuteron LE 50 UV is a variant of Deuteron LE 100 LV, diluted in 50% DPGDA. Even in small amounts it considerably reduces the surface and volume resistances. Deuteron LE 50 UV is soluble in all conventional solvent mixtures used in the coating industry, partially with some slight clouding. voir moins | Request Sample |
| Deuteron MM 659 | Deuteron | Deuteron MM 659 reduces the gloss in some coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. Spoiling of the transparency in UV-curing la...voir plus Deuteron MM 659 reduces the gloss in some coating systems. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. Spoiling of the transparency in UV-curing lacquers is not possible due to the favorable composition of Deuteron MM 659. The obtained coating surfaces show excellent resistance regarding burnishing and mar resistance. The use of Deuteron MM 659 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. A reaction between matting agent and lacquer system and therefore a spoiling of the storage stability has not been noticed. voir moins | Request Sample |
| Deuteron MM 669 | Deuteron | Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. When using Deuteron MM 669 in UV-curing binders ...voir plus Deuteron MM 669 reduces the gloss of organic coatings. At a higher dosage the viscosity will only be slightly increased. Good flow and processibility remain and allow for all usual application processes. When using Deuteron MM 669 in UV-curing binders no cloudiness has been noticed. The surfaces of coatings show excellent resistance to burnishing and mar resistance. Deuteron MM 669 imparts coatings with a soft touch. In general, the additional use of waxes, PTFE or similar products is not necessary. voir moins | Request Sample |
| DISPERBYK®-2013 | BYK | DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excel...voir plus DISPERBYK®-2013 is a solvent-free wetting and dispersing additive for 100% UV systems and solvent-borne and water-borne UV systems for printing inks and coatings. Based on its balanced product polarity and 100% delivery form, DISPERBYK-2013 achieves excellent stabilization, in particular in 100% UV systems and particularly of organic pigments and carbon black pigments. In so doing, this product has an impressive, effective viscosity-reducing effect, simultaneously reducing thixotropic flow behavior. voir moins | |
| Doubletex OB | DBC Europe GmbH | Doubletex OB is a benzoxazole optical brightener. It is recommended for use in most coating and plastic applications to enhance whiteness. This product is a yellowish powder that is also odorless. It is highly efficient and suitable for the following addi...voir plus Doubletex OB is a benzoxazole optical brightener. It is recommended for use in most coating and plastic applications to enhance whiteness. This product is a yellowish powder that is also odorless. It is highly efficient and suitable for the following additional applications: as a whiteness mask for yellowish shelf clear coating; printing ink for security, safeguard; manufacture of fluorescent pigments/dyestuffs to reinforce the brightness; and increase deep tone for dark black and blue printing ink. voir moins | |
| EBECRYL® P116 | Allnex | EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, esp...voir plus EBECRYL® P 116 is a reactive amine additive used in place of more volatile amine synergists to increase the cure speed of ultraviolet (UV) cured coatings. When EBECRYL® P 116 is used in combination with other photoinitiators an increase in cure speed, especially at the surface, can be realized. It is recommended for use in: overprint varnishes, wood fillers and top coats, and clear coatings on paper and plastics. voir moins | Request Sample |
| Gasil® HP710 | PQ Corporation | Gasil® HP710 is a synthetic amorphous silica. It can be used as a matting agent suitable for high solids and waterborne coatings with excellent performances in 100% UV curable formulations. | |
| GENOCURE* EMK | Rahn AG | GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine fun...voir plus GENOCURE* EMK offers formulation options for faster, more effective curing with long wave UV and is well suitable for UV/LED application. It is a photoinitiator for UV-curable inks, coatings, and adhesives. Because it has both Type II and alkyl amine functionality, GENOCURE* EMK can be used either with or without supplementary photoinitiators and amine synergists. This product is recommended for offset inks, letterpress inks, screen inks, flexo inks, wood applications, and UV/LED inks and varnishes that can tolerate some yellow color. voir moins | Request Sample |
| GENOMER* 5271 | Rahn AG | GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and a...voir plus GENOMER* 5271 is a moderate viscosity amino acrylate oligomer with fast cure response, excellent flexibility, high gloss, low yellowing and TOLUENE-FREE. It is an acrylated amine resin with particular utility in UV and EB free radical inks, coatings and adhesives. GENOMER* 5271 contributes to excellent cure response, toughness, flexibility and adhesion. Unlike conventional amine synergists, GENOMER* 5271 reacts to become part of the product network, leading to lower odor, lower extractables and better overall properties. voir moins | Request Sample |
| Hostavin® 3051 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3051 is a low molecular weight hindered amine light stabilizer (HALS), characterized by its low volatility and good migration properties and enhanced Tribo effect for powder coating. | |
| Hostavin® 3051-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3051-2 disp. is a 52% aqueous dispersion of a low molecular radical scavenger (HALS). It is characterized by its easy incorporation, broad compatibility and low volatility. | |
| Hostavin® 3053 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3053 is the 80% solution of a low molecular weight hindered amine light stabilizer (HALS) in xylene. It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3055 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3055 is a low molecular weight hindered amine light stabilizer (HALS). It is characterized by its excellent solubility, broad compatibility, extremely low volatility and migration stability. | |
| Hostavin® 3058 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency...voir plus Hostavin® 3058 is a non-basic low molecular weight hindered amine light stabilizer (HALS), 100% liquid, characterized by its excellent solubility, broad compatibility in all kind of liquid paints, with low volatility and excellent stabilization efficiency. voir moins | |
| Hostavin® 3065 LIQ | Clariant Plastics & Coatings Ltd. | Hostavin® 3065 is a 100% liquid low molecular weight radical scavenger (HALS). It is characterized by its good solubility, broad compatibility and good stabilization efficiency in all kind of coatings. | |
| Hostavin® 3070 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration ...voir plus Hostavin® 3070 DISP is a 52% aqueous dispersion of a polymeric hindered amine light stabilizer (HALS), designed for UV stabilization of paints and clearcoats. This sustainable HALS is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for plastic coatings and architectural façade coatings. Hostavin® 3070 DISP has been awarded with an EcoTain® label resulting from its excellent toxicological profile. voir moins | |
| Hostavin® 3070 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique...voir plus Hostavin® 3070 P is an oligomeric hindered amine light stabilizer (HALS), designed for light stabilization of plastic materials, paints and clear coats. This HALS is characterized by its broad compatibility and excellent resistance to migration and unique solubility in solvent-borne coatings. voir moins | |
| Hostavin® 3225-2 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3225-2 disp. is a 52 % aqueous dispersion of a mixture of a halogenated benzotriazole UV-absorber with a radical scavenger (HALS). | |
| Hostavin® 3315 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extracti...voir plus Hostavin® 3315 DISP is a 52% aqueous dispersion of a benzotriazole UV absorber, designed for UV stabilization of paints and clearcoats. This sustainable UV absorber is characterized by its broad compatibility, high resistance to migration and low extraction, making it particularly suitable for wood and plastics coatings. Hostavin 3315 DISP has been awarded with an EcoTain label resulting from its excellent toxicological profile. voir moins | |
| Hostavin® 3326 DISP | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatin...voir plus Hostavin® 3326 disp. is a 52 % aqueous dispersion of a broad apsorption benzotriazole UV-absorber. It is characterized by its excellent compatibility and high efficiency in waterborne paints and varnishes, especially for protection of exterior wood coatings. voir moins | |
| Hostavin® 3326 P | Clariant Plastics & Coatings Ltd. | Hostavin® 3326 is an UV absorber with broad absorption. Besides cooling application it is mainly used as an UV stabilizer for a wide range of plastics. | |
| Hycure Benzophenone | ChemFine International Co., Ltd. | Hycure Benzophenone is an ultraviolet radiation absorber and intermediate for organic pigments. | |
| Light Stabilizer 123 | North Wanxing Chemical Co., Ltd. | Light Stabilizer 123 is a low basicity hindered amine light stabilizer with a clear, slightly yellow liquid appearance and radical scavenging properties. This product is designed to promote light stabilization and prevent surfaces from blowing-out, peelin...voir plus Light Stabilizer 123 is a low basicity hindered amine light stabilizer with a clear, slightly yellow liquid appearance and radical scavenging properties. This product is designed to promote light stabilization and prevent surfaces from blowing-out, peeling-off, or chalking. Common applications include high solid automotive and industrial coatings, printing ink, and polyurethane lacquers. voir moins | |
| Light Stabilizer 144 | North Wanxing Chemical Co., Ltd. | Light Stabilizer 144 is a hindered amine light stabilizer that is a white to slightly yellow powder in appearance. This product is designed to provide light stabilization in automotive coatings, coil coatings, and powder coatings. | |
| Light Stabilizer 292 | North Wanxing Chemical Co., Ltd. | Light Stabilizer 292 is a hindered amine light stabilizer that is a light yellow, viscous liquid in appearance. This product is used to provide light stabilization in automotive coatings, coil coatings, wood stains, and radiation curable coatings. | |
| Light Stabilizer (HALS) Sunuvin 400 | Yantai Suny Chem International Co., Ltd. | Sunuvin 400 is a liquid hydroxyphenyl-triazine(HPT) UV absorber which provides excellent performance in coatings. It is designed to fulfil the high performance and durability needs of waterborne, solvent borne and 100% solids automotive and industrial fin...voir plus Sunuvin 400 is a liquid hydroxyphenyl-triazine(HPT) UV absorber which provides excellent performance in coatings. It is designed to fulfil the high performance and durability needs of waterborne, solvent borne and 100% solids automotive and industrial finishes. voir moins | |
| NANOBYK®-3822 | BYK | NANOBYK®-3822 is a nanoparticle dispersion (zinc oxide) for long-term UV protection in aqueous systems. | |
| OMNISTAB® LS 123 | Partners in Chemicals | OMNISTAB® LS 123 is a liquid non-basic HALS for coatings, packaging, adhesives and sealants. It is the solution for all exterior solvent-based automotive and industrial coatings where high performance and durability are required and basic HALS fail. It i...voir plus OMNISTAB® LS 123 is a liquid non-basic HALS for coatings, packaging, adhesives and sealants. It is the solution for all exterior solvent-based automotive and industrial coatings where high performance and durability are required and basic HALS fail. It improves the retention and mechanical properties and protects coatings from surface defects such as gloss reduction, crackling and chalking. voir moins | |
| OMNISTAB® LS 292 | Partners in Chemicals | OMNISTAB® LS 292 is a multi-purpose liquid basic HALS for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of solvent- and water-based exterior coatings applications including ra...voir plus OMNISTAB® LS 292 is a multi-purpose liquid basic HALS for coatings, printing and packaging, adhesives and sealants. It is designed to meet high performance and durability requirements of solvent- and water-based exterior coatings applications including radiation-curable systems (UV, electron beam). It protects coatings from surface defects such as gloss reduction, cracking, and chalking. It improves retention of mechanical properties. voir moins | |
| OMNISTAB® UV 1130 | Partners in Chemicals | OMNISTAB® UV 1130 is a liquid hydrophilic benzotriazole-based UV absorber designed to meet high performance and excellent durability requirements in coatings, printing & packaging and adhesives & sealants. Universally applicable in solvent- and water-base...voir plus OMNISTAB® UV 1130 is a liquid hydrophilic benzotriazole-based UV absorber designed to meet high performance and excellent durability requirements in coatings, printing & packaging and adhesives & sealants. Universally applicable in solvent- and water-based coatings including UV-curable systems. voir moins | |
| OMNISTAB® UV 234 | Partners in Chemicals | OMNISTAB® UV 234 is a high molecular weight ultraviolet light absorber (UVA) of the hydroxyl- phenyl benzotriazole class, imparting excellent light stability to a variety of polymers. OMNISTAB® UV 234 features low volatility, exceptional light absorbing c...voir plus OMNISTAB® UV 234 is a high molecular weight ultraviolet light absorber (UVA) of the hydroxyl- phenyl benzotriazole class, imparting excellent light stability to a variety of polymers. OMNISTAB® UV 234 features low volatility, exceptional light absorbing characteristics and good compatibility in various substrates. This makes the product particularly suitable for applications characterized by high surface area, such as films and fibers; applications include molded articles, films, sheets and fibers. voir moins | |
| OMNISTAB® UV 326 | Partners in Chemicals | OMNISTAB® UV 326 is a UV absorber of the hydroxyphenyl benzotriazole class, which imparts outstanding light stability to plastics and other organic substrate. | |
| OMNISTAB® UV 928 | Partners in Chemicals | OMNISTAB® UV 928 is a solid benzotriazole-based UV absorber for coatings, printing and packaging, adhesives and sealants. It was designed to meet high performance and durability requirements of solvent-based automotive, industrial and powder coatings. | |
| Photoinitiator 1173 | Jiangsu Sanmu Group Corporation | Photoinitiator 1173 is a UV photo initiator, which is widely used in clear coatings for wood, plastics and metal, and overprint varnish. | |
| Photoinitiator 184 | Jiangsu Sanmu Group Corporation | Photoinitiator 184 is a UV photo initiator, which is widely used in clear coatings for wood, plastics and metal, and overprint varnish. | |
| S-381-N5 (Carnauba / Synthetic Wax Blend) | Shamrock Technologies b.v.b.a. | S-381-N5 is a carnauba and synthetic micronized wax blend that has a uniform melting range peaking at 91°C. S-381-N5 is recommened for powder, water-based and UV coating systems. | |
| SCHWEGO® Foam 6360 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6360 is a defoamer for water-based and UV-curing coatings. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6360 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings...voir plus SCHWEGO® Foam 6360 is a defoamer for water-based and UV-curing coatings. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6360 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6360 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. voir moins | |
| SCHWEGO® Foam 6361 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV c...voir plus SCHWEGO® Foam 6361 is a defoamer for water-based and UV-cured coating systems. This clear, light yellowish liquid is VOC- and silicone-free. SCHWEGO® foam 6361 is a product with interfacial activity which suppresses the formation of entrapped air in UV coatings, i.e. air bubbles are destroyed before the film dries. Cratering is prevented and levelling is promoted. SCHWEGO® foam 6361 shows excellent defoaming action in UV coatings and is also suitable for coatings based on alkyd, polyester, epoxy, PU and acrylate. voir moins | |
| SCHWEGO® Wett 6260 | Bernd Schwegmann GmbH & Co. KG | SCHWEGO® Wett 6260 is a polymeric wetting and dispersing additive for water-based coating systems. This product universally suitable for pigment milling in water-based coating systems. It shortens milling time, because pigment agglomerates are ruptured an...voir plus SCHWEGO® Wett 6260 is a polymeric wetting and dispersing additive for water-based coating systems. This product universally suitable for pigment milling in water-based coating systems. It shortens milling time, because pigment agglomerates are ruptured and stabilised effectively. Hence, sedimentation and demixing of the pigments, respectively floating or flooding during application, are prevented. The colour strength of pigments is improved and the colour shade does not change even after long storage. SCHWEGO® wett 6260 is compatible with most resin systems. SCHWEGO® wett 6260 is suitable to disperse inorganic and organic pigments and carbon black. It is especially suitable for the production of UV coatings. SCHWEGO® wett 6260 is also suitable for alkyd-, acryl-, polyester, epoxy- and PUR-coating systems. voir moins | |
| SONGCURE® CS 819 | SONGWON Industrial Group | SONGCURE® CS 819 is an adaptable photoinitiator for radical polymerisation of unsaturated resins upon UV light exposure. Especially designed for white pigmented formulations, for clearcoats in outdoor use and in the curing of glass fiber polyester-styrene...voir plus SONGCURE® CS 819 is an adaptable photoinitiator for radical polymerisation of unsaturated resins upon UV light exposure. Especially designed for white pigmented formulations, for clearcoats in outdoor use and in the curing of glass fiber polyester-styrene system. voir moins | |
| SONGCURE® CS 907 | SONGWON Industrial Group | SONGCURE® CS 907 is a photoinitiator a photoinitiator used to initiate the photopolymerisation of unsatured prepolymers. | |
| SONGCURE® CS TPO | SONGWON Industrial Group | SONGCURE® CS TPO is a free radicals solid photoinitiator with high efficiency, which can be used in varieties of coatings. | |
| SONGSORB® CS 111 | SONGWON Industrial Group | SONGSORB® CS 111 is an excellent UV stabilizer with outstanding extraction resistance, low gas fading and low pigment interaction developed for powder coatings, coil coatings, adhesives and sealants. The low softening point at extrusion temperatur...voir plus SONGSORB® CS 111 is an excellent UV stabilizer with outstanding extraction resistance, low gas fading and low pigment interaction developed for powder coatings, coil coatings, adhesives and sealants. The low softening point at extrusion temperatures and extremely low volatility at cure temperatures makes this product particularly well suited for these applications. voir moins | |
| SONGSORB® CS 1130 | SONGWON Industrial Group | SONGSORB® CS 1130 is a liquid UV absorber of benzotriazole type for high performance coating applications. | |
| SONGSORB® CS 119 | SONGWON Industrial Group | SONGSORB® CS 119 is a high molecular weight hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications, including polyolefins, TPO, styrenic polymers, polyamide fibers, polyurethanes, and elastomers. | |
| SONGSORB® CS 123 | SONGWON Industrial Group | SONGSORB® CS 123 is a liquid HALS stabilizer based on an amino ether functionality. | |
| SONGSORB® CS 144 | SONGWON Industrial Group | SONGSORB® CS 144 is a light stabilizer of the HALS family with an antioxidant ration of the sterically hindered phenol type. | |
| SONGSORB® CS 1577 | SONGWON Industrial Group | SONGSORB® CS 1577 is a UV absorber of the hydroxyphenyl triazine cluster with strong absorption properties of ultraviolet radiation in the 300~400㎚ region. | |
| SONGSORB® CS 171 | SONGWON Industrial Group | SONGSORB® CS 171 is a liquid UV absorber of the hydroxyphenyl-benzotriazole cluster. | |
| SONGSORB® CS 292 | SONGWON Industrial Group | SONGSORB® CS 292 is an excellent liquid hindered amine light stabilizer developed for coatings. The product can significantly extend the life time of the coatings by minimizing cracking and loss of gloss. | |
| SONGSORB® CS 312 | SONGWON Industrial Group | SONGSORB® CS 312 is a highly effective UV absorber of the oxanilide family. | |
| SONGSORB® CS 326 | SONGWON Industrial Group | SONGSORB® CS 326 is a strong absorber of ultraviolet radiation in the 300~400 ㎚ region and has a high degree of photostability-photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. | |
| SONGSORB® CS 328 | SONGWON Industrial Group | SONGSORB® CS 328 is a strong absorber of ultraviolet radiation in the 290~400㎚ region and has a high degree of photostability. The photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. | |
| SONGSORB® CS 329 | SONGWON Industrial Group | SONGSORB® CS 329 is a strong absorber of ultraviolet radiation in the 300~400㎚ region and has a high degree of photostability. The photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. | |
| SONGSORB® CS 360 | SONGWON Industrial Group | SONGSORB® CS 360 is a strong absorber of ultraviolet radiation in the 300~400㎚ region and has a high degree of photostability-photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. | |
| SONGSORB® CS 384-2 | SONGWON Industrial Group | SONGSORB® CS 384-2 is a liquid UV absorber of hydroxyphenyl benzotriazole type for high performance coating applications. | |
| SONGSORB® CS 400 | SONGWON Industrial Group | SONGSORB® CS 400 is a liquid UV absorber of the hydroxyphenyl triazine cluster with excellent performance in coatings derived from its high thermal and photo stability and hydroxy functionality (minimal migration). | |
| SONGSORB® CS 5100 | SONGWON Industrial Group | SONGSORB® CS 5100 is a liquid HALS stabilizer based on an aminoether functionality. | |
| SONGSORB® CS 5151 | SONGWON Industrial Group | SONGSORB® CS 5151 is a synergistic combinations of selected Benzotriazole based UV absorber and HALS, for protection against surface defects such as gloss reduction, cracking, blistering, delamination and color coatings change. | |
| SONGSORB® CS 622 | SONGWON Industrial Group | SONGSORB® CS 622 is a light stabilizer of the hindered amine light stabilizer family (HALS) and because of its oligomeric structure with high molecular weight is the stabilizer of choice for application demanding low volatility and minimal migration. | |
| SONGSORB® CS 770 | SONGWON Industrial Group | SONGSORB® CS 770 is a solid light stabilizer of the hindered amine family (HALS), with low molecular weight and it is suitable for applications demanding particularly high light stability. | |
| SONGSORB® CS 81 | SONGWON Industrial Group | SONGSORB® CS 81 is a solid UV absorber of 2-hydroxy-benzo-phenone type. | |
| SONGSORB® CS 900 | SONGWON Industrial Group | SONGSORB® CS 900 is a UV absorber of the hydroxybenzotriazole class developed specifically for coatings. It is a strong absorber of ultraviolet radiation in the 300~400㎚ region and has a high degree of photostability-photochemical energy absor...voir plus SONGSORB® CS 900 is a UV absorber of the hydroxybenzotriazole class developed specifically for coatings. It is a strong absorber of ultraviolet radiation in the 300~400㎚ region and has a high degree of photostability-photochemical energy absorbed in the ultraviolet region is dissipated as thermal energy. voir moins | |
| SONGSORB® CS 928 | SONGWON Industrial Group | SONGSORB® CS 928 is a UV absorber of benzotriazole type for high performance coating applications. | |
| SONGSORB® CS 944 | SONGWON Industrial Group | SONGSORB® CS 944 is a polymeric hindered amine light stabilizer (HALS) which is effective in a broad range of polymers and applications. | |
| SONGSORB® CS AQ01 | SONGWON Industrial Group | SONGSORB® CS AQ01 is an HALS developed especially for water-based coating and when used alone or in combination with Benzotriazole UV absorbers it significantly extends coating lifetimes, preventing defects such as cracking and loss of gloss in outdoor ex...voir plus SONGSORB® CS AQ01 is an HALS developed especially for water-based coating and when used alone or in combination with Benzotriazole UV absorbers it significantly extends coating lifetimes, preventing defects such as cracking and loss of gloss in outdoor exposure. voir moins | |
| SONGSORB® CS UV1 | SONGWON Industrial Group | SONGSORB® CS UV1 provides excellent light stability to polyurethanes (PUR). | |
| Speedblock 1130 | Sartomer Americas | SpeedBlock 1130 is a liquid hydroxyphenyl benzotriazole type UV absorber for use in coatings and adhesives. SpeedBlock 1130 is typically used at 0.1 - 2.0% depending on the processing conditions and end application. | |
| Speedblock UV-0 | Sartomer Americas | SpeedBlock UV-0 is a benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-0 is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. | |
| Speedblock UV-6 | Sartomer Americas | SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% de...voir plus SpeedBlock UV-6 is a highly polymer compatible benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-6 provides low odour and volatility during high temperature processing and is typically used at 0.1 - 5.0% depending on the substrate, processing conditions and end application. voir moins | |
| Speedblock UV-9 | Sartomer Americas | SpeedBlock UV-9 is a highly efficient benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-9 is ideally suited for exterior coatings and is typically used at 0.1 - 5.0% depending on the processing conditions a...voir plus SpeedBlock UV-9 is a highly efficient benzophenone type UV absorber for use in polymer processing, coatings and adhesives. SpeedBlock UV-9 is ideally suited for exterior coatings and is typically used at 0.1 - 5.0% depending on the processing conditions and end application. voir moins |
