| ADDITOL® VXW 4934 | Allnex | ADDITOL® VXW 4934 is an additive for water-dilutable paints for the prevention of pigment settling, for the improvement of edge crawling at dipping application and for increase of sagging limit at spray application. | Request Sample |
| Borchi® Gel D8 | OMG Borchers GmbH | Borchi® Gel D8 offers many advantages, including activating primary driers such as cobalt and manganese, promoting and stabilizing drying, increasing film hardness (through-drying), improved adhesion to different substrates, and improved water resistance ...voir plus Borchi® Gel D8 offers many advantages, including activating primary driers such as cobalt and manganese, promoting and stabilizing drying, increasing film hardness (through-drying), improved adhesion to different substrates, and improved water resistance and promotes corrosion resistance. It is suited for use as a thickener for solvent-based and solvent-free binders. voir moins | |
| Borchi® Gel Thixo 2 | OMG Borchers GmbH | Borchi® Gel Thixo 2 is a thixotropic agent and thickener for paints containing solvents of a mainly non-polar or weakly polar nature. It is suitable for use in binder systems based on drying oils, alkyd resins, epoxy resin esters, unsaturated polyesters, ...voir plus Borchi® Gel Thixo 2 is a thixotropic agent and thickener for paints containing solvents of a mainly non-polar or weakly polar nature. It is suitable for use in binder systems based on drying oils, alkyd resins, epoxy resin esters, unsaturated polyesters, polyurethanes, chlorinated rubber, etc. This product is supplied as a fine white powder and is used in gloss, silk finish and matted paints. voir moins | |
| Borchi® Set 134 | OMG Borchers GmbH | Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action...voir plus Borchi® Set 134 is an anti-settling agent which also acts as a viscosity adjuster. It is suitable for paints containing solvents, and it effectively inhibits the formation of hard sediments, even when heavy pigments are used. With its anti-settling action, Borchi® Set 134 is an excellent suspending agent for pigments and fillers. lt is also highly effective when used with heavy pigments and metal powders, offering particular advantages in zinc-rich paints for example. This product is an effective thixotropic agent and thickener for paints based on cold-curing epoxy resins,epoxy resin esters, alkyd resins, chlorinated and cyclised rubber, DD systems, vinyl resin polymers and copolymers. voir moins | |
| Eisen-(II)-Sulfat Ca. 6-7-Hydrat (Rieselfähig) | Büfa Chemikalien GmbH & Co.KG | Eisen-(II)-Sulfat Ca. 6-7-Hydrat (Rieselfa¨hig) is an odorless light green crystalline. | |
| Eisen-(II)-Sulfat-7-Hydrat (Quickfloc) | Büfa Chemikalien GmbH & Co.KG | Eisen-(II)-Sulfat-7-Hydrat (Quickfloc)) is an odorless light green crystalline. | |
| Iron-(III)-Chloride Solution Ca. 40% EN 888 Typ II | Büfa Chemikalien GmbH & Co.KG | Iron-(III)-Chloride Solution Ca. 40% EN 888 Typ II is a brown liquid with a characteristic odor. | |
| SpectrAl® 100 | Cabot Corporation - Additives | SpectrAl® 100 is a high surface area fumed alumina. It has similar properties and functions as fumed silica for rheological control and free flow of powder coats. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 51 | Cabot Corporation - Additives | SpectrAl® 51 is a low surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| SpectrAl® 81 | Cabot Corporation - Additives | SpectrAl® 81 is a medium surface area fumed alumina. It has similar morphology and properties as fumed silica for rheological control and free flow. This product is well suited for use in coatings, adhesives, and rubber products. | |
| TARGON® G 5 | ICL Phosphate Specialty | TARGON® G 5 is a secondary retarder based on condensed phosphates. It is a white, fine, non-hygroscopic powder. It is a secondary retarder component for premixed gypsum plaster. This product has a dispersing effect on the solid content of the plaster. It ...voir plus TARGON® G 5 is a secondary retarder based on condensed phosphates. It is a white, fine, non-hygroscopic powder. It is a secondary retarder component for premixed gypsum plaster. This product has a dispersing effect on the solid content of the plaster. It achieves constant setting and prolongs the treating time between cutting and felting. TARGON® G 5 also improves the finishing treating qualities. voir moins | Request Sample |
