| Desmophen® 1300 BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 BA is a polyester polyol, and is ideally used as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings. This product has a non-volatile content (2g resin/2 ml toluene/1h at 125°C, convection oven of 75 ± 1...voir plus Desmophen® 1300 BA is a polyester polyol, and is ideally used as the co-reactant for polyisocyanates in the formulation of air-drying, two-pack coatings. This product has a non-volatile content (2g resin/2 ml toluene/1h at 125°C, convection oven of 75 ± 1, a viscosity at 23°C of 1,000 ± 200 mPa·s, and an equivalent weight of approx. 530. Desmophen® 1300 BA is especially suitable for the formulation of fast-drying, two-pack coatings. They are mainly used for clear and pigmented finishes for wood, chipboard and hardboard. voir moins | |
| Desmophen® 1300 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 EA is a polyester polyol used as a co-reactant for polyisocyanate in the formulation of air-drying, two-pack coatings. This product has a flash point of approx. -4°C, a hydroxyl content of 3.0 ± 0,3%, and a viscosity at 23°C of 300 ± 200 m...voir plus Desmophen® 1300 EA is a polyester polyol used as a co-reactant for polyisocyanate in the formulation of air-drying, two-pack coatings. This product has a flash point of approx. -4°C, a hydroxyl content of 3.0 ± 0,3%, and a viscosity at 23°C of 300 ± 200 mPa·s. Desmophen® 1300 EA is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. voir moins | |
| Desmophen® 1300 PR 75 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 PR 75 X is a hydroxyl-bearing polyester. It is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. | |
| Desmophen® 1300 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1300 X is a polyester polyol used as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings. This product has a flash point of approx. 29°C, a density at 20°C of approx. 1,05g/ml, and a non-volatile content (2g r...voir plus Desmophen® 1300 X is a polyester polyol used as the co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings. This product has a flash point of approx. 29°C, a density at 20°C of approx. 1,05g/ml, and a non-volatile content (2g resin/2ml toluene/1h at 125°C), convection oven of 75 ± 1. Desmophen® 1300 X is especially suitable for the formulation of fast-drying two-pack systems. These are mainly used as clear and pigmented finishes for wood, chipboard and hardboard. voir moins | |
| Desmophen® 1400 PR 75% MIBK | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding seal...voir plus Desmophen® 1400 PR 75% MIBK is a non-drying fatty acid-modified polyester, and is used as a co-reactant for polyisocyanates in the formulation of air-drying two-component polyurethane coatings. It is especially suitable for the formulation of sanding sealers and two-component clear and pigmented top coats for wood. It can be also used in coating systems for metal and plastics. This product has an iodine color value (50% solution) of < 5, a flash point of < 3°C, and a viscosity at 23°C of 13.000 ± 2.000 mPa·s. voir moins | |
| Desmophen® 670 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 670 is a solvent-free, slightly branched, hydroxyl-bearing polyester that is ideally used as a co-reactant, usually with Desmodur N 75 and N 3390, in the formulation of flexible, weather-stable coatings. They are mainly used to coat plastics an...voir plus Desmophen® 670 is a solvent-free, slightly branched, hydroxyl-bearing polyester that is ideally used as a co-reactant, usually with Desmodur N 75 and N 3390, in the formulation of flexible, weather-stable coatings. They are mainly used to coat plastics and are force-dried, e.g. at 80°C. Desmophen® 670 can be used as a flexibilizer in other DD coating systems. This product has a viscosity at 23°C (80% in butyl acetate) of 2,200 ± 400 mPa·s, a pour point of approx. + 8°C, and an acid value of 2 ± 1mg KOH/g. voir moins | |
| Desmophen® 800 80% BA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 80% BA is a highly branched, hydroxyl-bearing polyester that is ideally used in the formulation of two-component polyurethane coatings. This product has a flash point of approx. 31°C, a density at 20°C of approx. 1.08g/ml, and a non-volatil...voir plus Desmophen® 800 80% BA is a highly branched, hydroxyl-bearing polyester that is ideally used in the formulation of two-component polyurethane coatings. This product has a flash point of approx. 31°C, a density at 20°C of approx. 1.08g/ml, and a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of 80 ± 1%. When combined with Desmodur® L, Desmophen® 800 80 % BA yields hard and chemically resistant films. The coatings are also caracterised by their high impact strength, toughness and resistance to abrasion. When combined with Desmophen® 1100, it yields floor coatings with high resistance to abrasion. voir moins | |
| Desmophen® 800 EA | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® 800 EA is a highly branched polyester bearing hydroxyl group that is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. This product has a pour point of < -60...voir plus Desmophen® 800 EA is a highly branched polyester bearing hydroxyl group that is especially suitable for the formulation of fast-drying, two-component systems for graphics applications and as an over-printing lacquer. This product has a pour point of < -60°C, a flash point of approx. -4°C, an equivalent weight of approx. 320, and hazen color value of ≤ 250. voir moins | |
| Desmophen® C 1100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 1100 is a solvent-free, medium-viscosity linear aliphatic polycarbonate polyester liquid that is used in high-grade building blocks for a variety of polyurethane systems. This product has an equivalent weight of approx. 500, an acid number of...voir plus Desmophen® C 1100 is a solvent-free, medium-viscosity linear aliphatic polycarbonate polyester liquid that is used in high-grade building blocks for a variety of polyurethane systems. This product has an equivalent weight of approx. 500, an acid number of approx. 0.1mg KOH/g, and a viscosity at 23°C of 3,200 ± 1,300 mPa·s. In combination with polyisocyanates as a high-grade building block for the formulation of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. voir moins | |
| Desmophen® C 1200 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 1200 is a linear aliphatic polycarbonate polyester that is ideally used as a high-grade building block for a variety of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability,...voir plus Desmophen® C 1200 is a linear aliphatic polycarbonate polyester that is ideally used as a high-grade building block for a variety of polyurethane systems, including coatings or sealants for interior and exterior applications with very good weatherability, lightfastness, hydrolytic stability and elasticity. This product has a viscosity at 23°C of 16,500 ± 2,500 mPa·s, a hazen color value of < 150, and a hydroxyl content of 1.7 ± 0.2%. voir moins | |
| Desmophen® C 2100 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C 2100 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good...voir plus Desmophen® C 2100 is a linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 1,000 g/mol. It is a solvent-free, waxy at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. It has a hydroxyl content of 3.3 ± 0.3%, viscosity at 75°C of 410 ± 110 mPa·s, and an equivalent weight of approx. 500. voir moins | |
| Desmophen® C XP 2716 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very goo...voir plus Desmophen® C XP 2716 is linear, hydroxyl-terminated, aliphatic polycarbonate diol with a molecular weight of approx. 650 g/mol. It is a solvent-free, liquid at room temperature, high-grade building block for a variety of polyurethane systems with very good weatherability, lightfastness and hydrolytic stability. This product has a hydroxyl content of approx. 5.2%, an acid number of approx. 0.1mg KOH/g, and a water content of approx. 0.05%. voir moins | |
| Desmophen® PL 300 X | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 300 X is a fatty acid-modified polyester resin used as a co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings for industrial wood finishing. This product has a non-volatile content (2g/2ml toluene/1h at 125°C/ c...voir plus Desmophen® PL 300 X is a fatty acid-modified polyester resin used as a co-reactant for polyisocyanates in the formulation of air-drying two-pack coatings for industrial wood finishing. This product has a non-volatile content (2g/2ml toluene/1h at 125°C/ convection oven) of 60 ± 1, an iodine color value, 50 % resin of max. 5, and a viscosity at 23°C of 5,350 ± 150 mPa·s. Desmophen® PL 300 is highly reactive and yields good transparency, level-ling and gloss. It can also be used to formulate primers with a higher solids content than those based on highly condensed resins. In such coatings, the product yields good overcoatability and early sand-ability. voir moins | |
| Desmophen® PL 800 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 800 is a fatty acid-modified polyester resin of low molecular weight. It is used as a co-reactant for polyisocyanates (Desmodur® HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. This prod...voir plus Desmophen® PL 800 is a fatty acid-modified polyester resin of low molecular weight. It is used as a co-reactant for polyisocyanates (Desmodur® HL, IL, L or N) in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of approx. 70%, a hydroxyl content (supply form) of approx. 2.5%, and an iodine color value (50% resin) of max. 2. Desmophen® PL 800 is characterised by excellent pigment wetting and gloss. It is therefore especially suitable for the formulation of high-gloss pigmented polyurethane finishes. Coatings formulated with Desmophen® PL 800 have low application viscosity and a long pot life, good yellowing resistance, excellent elasticity and high body. Generally speaking, the product has good compatibility. However, this should be tested in each individual case. voir moins | |
| Desmophen® PL 817 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® PL 817 is a non-drying fatty acid-modified polyester resin that is ideally used as a co-reactant for polyisocyanates in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a viscosity at 23°C of...voir plus Desmophen® PL 817 is a non-drying fatty acid-modified polyester resin that is ideally used as a co-reactant for polyisocyanates in the formulation of air-drying two-component coatings for industrial wood finishing. This product has a viscosity at 23°C of 10,000 ± 2,000 mPa·s, a non-volatile content (2g resin/2ml toluene/1h at 125°C, convection oven) of 75 ± 1, and an acid value (supply form) of 3.3 ± 0.2%. Desmophen® PL 817 is suitable for combination with highly condensed resins in the formulation of primers with a high solids content. No significant deterioration in reactivity, sandability or chemical resistance is observed compared with formulations based solely on this type of binder. In top coat formulations, Desmophen® PL 817 yields films with good surface hardness and matting. Generally speaking, Desmophen® PL 817 has good compatibility with a large number of physically drying binders (e.g. nitrocellulose). However, compatibility tests should be carried out in each individual case. voir moins | |
| Desmophen® VP LS 2249/1 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2249/1 is a branched short-chain polyester polyol that is ideally used as a binder for high-quality hard and weather-stable coatings and for decorative gravel. It is a pale-colored solvent-free liquid of low viscosity. This product has an...voir plus Desmophen® VP LS 2249/1 is a branched short-chain polyester polyol that is ideally used as a binder for high-quality hard and weather-stable coatings and for decorative gravel. It is a pale-colored solvent-free liquid of low viscosity. This product has an acid value of approx. 2mg KOH/g, a flash point of approx. 130°C, a hydroxyl content of 15.5 ± 1%, and a viscosity at 23°C of 1,900 ± 200 mPa·s. Desmophen® VP LS 2249/1 is used as the hardener component in weather-stable polyurethane systems. The preferred polyol combinations are mixtures with, for example, Desmophen® 1150 or Desmophen® C 1100. Desmophen® VP LS 2249/1 is used in the formulation of hard coatings, sealing compounds and mortars for decorative gravel. The aforementioned Desmodur® grades are among the suitable co-reactants. voir moins | |
| Desmophen® VP LS 2328 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2328 is a solvent-free, low-viscosity, linear short-chain polyester polyol liquid, and is most often used as a binder for high-quality, high-solids or solvent-free, flexible two-component coatings. This product has an OH content of 7.95 ±...voir plus Desmophen® VP LS 2328 is a solvent-free, low-viscosity, linear short-chain polyester polyol liquid, and is most often used as a binder for high-quality, high-solids or solvent-free, flexible two-component coatings. This product has an OH content of 7.95 ± 0.35%, an acid value of < 0.5mg KOH/g, and a vscosity at 23°C of 800 ± 50 mPa·s. Desmophen® VP LS 2328 is used as the flexibilising component in two-component polyurethane coatings. Preferred polyol combinations are mixtures with e.g. Desmophen® VP LS 2249/1 as the hard component to achieve the desired flexibility. Desmophen® VP LS 2328 is suitable for the formulation of highly flexible polyurethane coatings. Combination with Desmophen® VP LS 2249/1 yields systems of medium flexibility. voir moins | |
| Desmophen® VP LS 2388 | Covestro (formerly Bayer MaterialScience) 科思创 | Desmophen® VP LS 2388 is a flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur® N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor wea...voir plus Desmophen® VP LS 2388 is a flexibilising hydroxyl-bearing polyester used as a co-reactant, primarily with Desmodur® N, in the formulation of two-component polyurethane coatings for plastics, characterised by their resistance to accelerated and outdoor weathering, high film elasticity and good tar resistance; also in the flexibilisation of hard coatings, e.g. in industrial applications. This product has a non-volatile content (1g,1h,125°C) of 80 ± 2%, a viscosity at 23°C of 3,000 ± 500 mPa·s, an equivalent weight of approx. 450. Desmophen® VP LS 2388 is used primarily in combination with Desmodur® N 75 and Desmodur® N 3390 in the formulation of fast-drying, high-solids, two-component polyurethane coatings characterised by good lightfastness and weather stability, high film elasticity and good tar resistance. Of particular note is the better QUV performance and tar resistance compared with a Desmodur® N / Desmophen® 670 combination. The film elasticity values are comparable with those yielded by Desmophen® 670. voir moins | |
| DICAP® 2020 Acid Functional Saturated Polyester Polyol | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DICAP® 2020 Acid Functional Saturated Polyester Polyol is a linear saturated polyester diol with a pendant carboxylic functional group. The OH terminated polyester chains are DMPA® Dimethylolpropionic acid initiated polycaprolactone. The combination of bo...voir plus DICAP® 2020 Acid Functional Saturated Polyester Polyol is a linear saturated polyester diol with a pendant carboxylic functional group. The OH terminated polyester chains are DMPA® Dimethylolpropionic acid initiated polycaprolactone. The combination of both hydroxyl and carboxyl functionality produces unique benefits and versatility. The acid group promotes water dispersability of the resin after neutralisation with a base or can improve adhesion to difficult substrates. This product has a melting point (DSC) of 59.3°C, a non-volatile content of 99% wt. min., a viscosity @ 60°C of 800-1000cP, and an acid equivalent weight of 935-1122g/eqv. Since no DMPA is required to formulate water dispersible pre-polymers, NMP may be reduced or eliminated from the formulations. Pre-polymers formulated with DICAP® products have very good solubility in monomers for hybrid applications and in acetone for solvent-free PUDs. Depending on the molecular weight of the DICAP® polyol and the formulating technique, hard films can be formulated for durable coatings or soft urethane polymers can be formulated for coating textiles and leathers. DICAP® products can be used in compliance with 21CFR 175.105 for indirect contact with food. voir moins | |
| DMPA® Polyol HA-0135 | GEO Specialty Chemicals, Inc., Paints & Coatings Group | DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA...voir plus DMPA® Polyol HA-0135 is a linear polyester polyol that contains both hydroxyl and acid functionality. The structure of DMPA® Polyol HA-0135 has been specifically designed to achieve maximum hydrolytic stability in water-borne applications. DMPA® Polyol HA-0135 can be used to formulate high solids and NMP free polyurethane dispersions. It is a source of acid functionality for water-borne applications, is a co-resin to improve pigment wetting, dispersing and stabilizing. This product has an acid value of 100-115mg KOH/g, density @ 25°C of 1200-1235g/l, and a non-volatile content of 98% min. voir moins | |
| L-2908 | Chan Sieh Enterprises Co, Ltd. | L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal c...voir plus L-2908 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, concrete and metal coatings, and to coat vinyl, wood, and plastic. voir moins | |
| L-2909 | Chan Sieh Enterprises Co, Ltd. | L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete...voir plus L-2909 is an aliphatic polyester polyol with a solid content ratio of 33.5%. This product is hard, flexible and durable. It provides chemical, water, humidity, UV, and abrasion resistance. It can be used in screen and gravure inks, and to coat concrete, metal, vinyl, wood and plastic. voir moins | |
| L-2911 | Chan Sieh Enterprises Co, Ltd. | L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, an...voir plus L-2911 is an aliphatic polyester polyol with a solid content ratio of 30%. This product is soft and flexible. It provides non-yellowing abrasion resistance. It can be used in printing inks for pvc flooring, and to coat paper, leather, plastic, wood, and parquet. voir moins | |
| L-2916 | Chan Sieh Enterprises Co, Ltd. | L-2916 is an aliphatic polyester polyol with a solid content ratio of 39.5%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates in a broad range of application. It can be used in metal finishing ...voir plus L-2916 is an aliphatic polyester polyol with a solid content ratio of 39.5%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates in a broad range of application. It can be used in metal finishing repair coatings, floor polishes and wood primers, and coatings for paper, plastic, wood and parquet. voir moins | |
| L-2917 | Chan Sieh Enterprises Co, Ltd. | L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be use...voir plus L-2917 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides abrasion and chemical resistance. It is an excellent adhesive to plastic, and is compatible with acrylic emulsions. This product can be used in printing inks, and to coat plastic, leather, concrete, metal, wood, and paper. voir moins | |
| L-2918 | Chan Sieh Enterprises Co, Ltd. | L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal ...voir plus L-2918 is an aliphatic polyester polyol with a solid content ratio of 40%. This product provides chemical, humidity and abrasion resistance, and good adhesion to many substrates. It can be used as a laminating adhesive, and to coat wood, parquet, metal and plastic. voir moins | |
| L-2919 | Chan Sieh Enterprises Co, Ltd. | L-2919 is an aliphatic polyester polyol with a solid content ratio of 39%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates with a broad range of application. L-2919 can be used in metal finish...voir plus L-2919 is an aliphatic polyester polyol with a solid content ratio of 39%. This product provides chemical, humidity, abrasion, and BHMR resistance. It adheres well to many substrates with a broad range of application. L-2919 can be used in metal finishing repair coatings, floor polish, wood primer, and to coat paper, plastic, wood, and parquet. voir moins | |
| L-2933 | Chan Sieh Enterprises Co, Ltd. | L-2933 is an aliphatic polyester polyol with a solid content ratio of 38.2%. This product provides good heat resistance, is clear and light-stable, and adheres well to many substrates. It can be used as a laminating adhesive. | |
| L-2939 | Chan Sieh Enterprises Co, Ltd. | L-2939 is an aliphatic polyester polyol with a solid content ratio of 34.5%. This product is tough and flexible, and provides chemical and water resistance. It can be used to coat metals. | |
| L-2946 | Chan Sieh Enterprises Co, Ltd. | L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, conc...voir plus L-2946 is an aliphatic polyester polyol with a solid content ratio of 32%. This product provides solvent and blocking resistance, and is hard and flexible with good adhesion on flexible substrates. It can be used in printing ink, and to coat glass, concrete, wood, and parquet. voir moins | |
| L-2955 | Chan Sieh Enterprises Co, Ltd. | L-2955 is an aliphatic polyester polyol with a solid content ratio of 38.2%. This product is flexible, and provides humidity resistance with good adhesion. It can be used in adhesive applications. | |
| L-2976 | Chan Sieh Enterprises Co, Ltd. | L-2976 is an aliphatic polyester polyol with a solid content ratio of 33.8%. This product dries hard and fast, and offers chemical and abrasion resistance. It can be used in screen inks, and to coat metal, plastic, wood and parquet. | |
| L-2980 | Chan Sieh Enterprises Co, Ltd. | L-2980 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible and provides humidity and abrasion resistance. It can be used in industrial wood coatings. | |
| L-2982 | Chan Sieh Enterprises Co, Ltd. | L-2982 is an aliphatic polyester polyol with a solid content ratio of 34%. This product is flexible, and provides humidity and abrasion resistance. It can be used in printing inks, and to coat metal, concrete, plastic, wood and parquet. | |
| L-2991 | Chan Sieh Enterprises Co, Ltd. | L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing...voir plus L-2991 is an aliphatic polyester polyol with a solid content ratio of 39%. This product is tough and flexible, adheres well to plastic, and is compatible with acrylic emulsions. It offers chemical and abrasion resistance. L-2991 can be used in printing inks, and to coat plastic, leather, concrete, wood and parquet. voir moins | |
| L-2994 | Chan Sieh Enterprises Co, Ltd. | L-2994 is an aliphatic polyester polyol featuring good flexibility and adherence to plastic. This product is well suited for use in flexo and gravure printing inks. | |
| L-2999 | Chan Sieh Enterprises Co, Ltd. | L-2999 is an aliphatic polyester polyol with a solid content ratio of 40%. This product is tough, medium hard and clear, and provides humidity and chemical resistance. It can be used to coat wood, parquet, and cork lacquer. | |
| Polyol 4290 | Perstorp | Polyol 4290 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4290 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4360 | Perstorp | Polyol 4360 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4360 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4525 | Perstorp | Polyol 4525 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4525 is also used as a precursor for free radical radiation curing monomers and oligomers . | |
| Polyol 4640 | Perstorp | Polyol 4640 is a tetrafunctional liquid polyol, used as a chemical building block and as crosslinker in polyurethanes. Polyol 4640 is also used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R2490 | Perstorp | Polyol R2490 is a difunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. Polyol R2490 is also used as a chemical building block and as crosslinker in polyurethanes. | |
| Polyol R3430 | Perstorp | Polyol R3430 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3530 | Perstorp | Polyol R3530 is a trifunctional liquid polyol with secondary OH-groups, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3540 | Perstorp | Polyol R3540 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R3600 | Perstorp | Polyol R3600 is a trifunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R4630 | Perstorp | Polyol R4630 is a tetrafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R4631 | Perstorp | Polyol R4631 is a tetrafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Polyol R6405 | Perstorp | Polyol R6405 is a hexafunctional liquid polyol, used as a precursor for free radical radiation curing monomers and oligomers. | |
| Rexin XP 81 | S.A.P.I.C.I. SpA | Rexin XP 81 is a linear polyester polyol based on bio-derived succinic acid and glycol. This product combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 82 | S.A.P.I.C.I. SpA | Rexin XP 82 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| Rexin XP 86 | S.A.P.I.C.I. SpA | Rexin XP 86 is a linear polyester polyol. This product is based on bio-derived succinic acid and glycol, and it combines renewable content and good properties for elastomers. It can be used in elastomers, coatings, and adhesives. | |
| SETAL® 1603 BA-78 | Allnex | SETAL® 1603 BA-78 is a polyester polyol resin with 5.4% OH (calculated on non-volatiles). | Request Sample |
| SETAL® 168 SS-80 | Allnex | SETAL® 168 SS-80 is a slightly branched polyester polyol with 4.3 % OH (calculated on non-volatiles) High flexibility, even at low temperatures. Good outdoor durability. | Request Sample |
| SETAL® 6306 SS-60 | Allnex | SETAL® 6306 SS-60 is a water-soluble polyester polyol with 2.7% OH for waterborne OEM basecoat applications. It provides good pigment wetting properties, good stabilization of aluminum pigments, and improves film formation and flow. This product is suit...voir plus SETAL® 6306 SS-60 is a water-soluble polyester polyol with 2.7% OH for waterborne OEM basecoat applications. It provides good pigment wetting properties, good stabilization of aluminum pigments, and improves film formation and flow. This product is suitable for use in waterborne basecoats for the automotive OEM market and in wet-on-wet systems for car refinishing. voir moins | Request Sample |
| SETAL® 81462 SS-55 | Allnex | SETAL® 81462 SS-55 is a slightly branched polyester polyol with 5.4% OH (calculated on non-volatiles), modified with sag control agent. | Request Sample |
| SETAL® 82166 SS-64 | Allnex | SETAL® 82166 SS-64 is a slightly branched polyester polyol with 5.4 % OH (calculated on non-volatiles), modified with sag control agent. | Request Sample |
| Sovermol® 1102 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Sovermol® 1102 is a slightly branched polyether/polyester, for production of flexible 2 pack coatings and casting compounds. | |
| Sovermol® 815 | BASF Dispersions & Pigments Asia Pacific 巴斯夫亚洲分散液 & 颜料 | Sovermol® 815 is a branched polyether/polyester, for the production of rigid-flexible 2 pack coating and casting materials. | |
| WorléePol® 165 | Worlée-Chemie G.m.b.H. | WorléePol® 165 is a low viscous and solvent free branched polyol with ester and ether groups mainly used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechan...voir plus WorléePol® 165 is a low viscous and solvent free branched polyol with ester and ether groups mainly used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical wear-resistant coatings, e.g. for concrete, asphalt and steel. voir moins | |
| WorléePol® 230 | Worlée-Chemie G.m.b.H. | WorléePol® 230 is a low viscous and solvent free branched polyol with ester and ether groups used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical we...voir plus WorléePol® 230 is a low viscous and solvent free branched polyol with ester and ether groups used for the formulation of solvent free coatings, sealings, and adhesives. It is especially suitable as a hydrophobic basic binder for chemical and mechanical wear-resistant coatings, e.g. for concrete, asphalt and steel. Adding W´Pol 230 to systems based on W´Pol 165 results in better mechanical and chemical resistance. voir moins |
