| 4070-M-60 L/S Alkyd Resin | Gabriel Performance Products | 4070-M-60 L/S Alkyd Resin conforms to Federal Specification TT-R-266D, Type I, Class B. It is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery paints. | |
| 4070-M-70 ALKYD RESIN | Gabriel Performance Products | 4070-M-70 ALKYD RESIN is a general purpose resin for interior or exterior use in architectural and trim enamels, structural and machinery primers/enamels. This product conforms to Federal Specification TT-R-26D, Type I, Class A. | |
| 4412-M-50 M/S Alkyd Resin | Gabriel Performance Products | 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cu...voir plus 4412-M-50 M/S Alkyd Resin is an economical medium alkyd resin supplied at 50% non-volatile in mineral spirits. It is designed for air dry interior/exterior trade sales enamels, industrial primers and enamels, and maintenance paints. This product can be cured with U-F or melamine resins with excellent results. voir moins | |
| 4412-V-50 Alkyd Resin | Gabriel Performance Products | 4412-V-50 Alkyd Resin is a medium oil alkyd resin for interior or exterior use. It is suitable for air drying or baking coatings. | |
| 4653-V-50 Rosin Modified Alkyd | Gabriel Performance Products | 4653-V-50 Rosin Modified Alkyd is a fast drying rosin modified alkyd supplied at 50% non-volatile in VM&P Naphtha. This product can be used for fast drying, low cost enamels and primers. | |
| 4714-P-75 Chain Stopped Water Soluble Alkyd Resin | Gabriel Performance Products | 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solve...voir plus 4714-P-75 Chain Stopped Water Soluble Alkyd Resin is intended primarily for fast air dry and force dry coatings. As supplied, the resin will require neutralization with amine and additional co-solvent before the addition of water. The recommended co-solvent ratio in finished product should be 80:20 ratio of water to co-solvent by volume. voir moins | |
| 4724-XT-80 High Solids VT Alkyd Copolymer Resin | Gabriel Performance Products | 4724-XT-80 High Solids VT Alkyd Copolymer Resin is supplied at 80% non- volatile in a blend of xylene and toluene. The resin exhibits rapid dry, good toughness, and hardness. It is intended for use in fast drying industrial finishes with low VOCs. | |
| 4770-X-60 Short Oil Alkyd Resin | Gabriel Performance Products | 4770-X-60 Short Oil Alkyd Resin is a non-drying short oil alkyd resin containing coconut oil. Typical uses include plasticizer for nitrocellulose lacquers, and high quality low yellowing baking enamels with excellent durability. | |
| 4845-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4845-BS-70 Water Reducible Alkyd Resin is a water reducible alkyd resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 4870-M-70 Alkyd Resin | Gabriel Performance Products | 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resi...voir plus 4870-M-70 Alkyd Resin is a general purpose resin for use in architectural, structural steel, machinery primers, and enamels. Except for its higher-as-received and reduced viscosity, it meets all of the requirements of TT-T-266D, Type I, Class A alkyd resin. voir moins | |
| 4915-PMA-85 High Solids Short Oil Alkyd | Gabriel Performance Products | 4915-PMA-85 High Solids Short Oil Alkyd which is cut to 85% non-volatile in PM Acetate Solvent. This resin has good cure response with melamine/butylated melamine type resins and offers a fast reduction curve in aromatic and oxygenated solvents. | |
| 4929-X-50 Silicone Modified Short Oil Alkyd | Gabriel Performance Products | 4929-X-50 Silicone Modified Short Oil Alkyd is a fast air dry silicone modified alkyd for applications requiring good gloss retention and/or heat resistance. Applications include industrial and OEM finishes. | |
| 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd | Gabriel Performance Products | 4940-MKT-75 High Solids Chain Stopped Short Oil Alkyd based on tall oil. It is recommended for high solids industrial enamels and primers. This resin has an extremely fast set time and rate of through dry. | |
| 4947-SP-75 Water Reducible Alkyd | Gabriel Performance Products | 4947-SP-75 Water Reducible Alkyd is designed for air dry, force dry, or low bake application. This resin is for use in all colors including whites and pastels, and also in primers. It will give good corrosion and water resistance when properly formulated. | |
| 4971-BC-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank...voir plus 4971-BC-70 Water Reducible Alkyd Resin is a water reducible short oil alkyd resin formulated for baking applications. 4971-BC-70 gives good adhesion to most surfaces and good film hardness when crosslinked with melamine resins. It is intended for dip tank, flow coat, and spray applications. voir moins | |
| 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil | Gabriel Performance Products | 4984-MBA-80 High Solids HAPS-free Chain Stopped Short Oil can be used for air dry, force dry, and baking applications and is intended for industrial and OEM coatings. | |
| 4986-V-50 VT Modified Alkyd Resin | Gabriel Performance Products | 4986-V-50 VT Modified Alkyd Resin is a fast drying general purpose alkyd resin which features a slow solvent reduction curve. Typical uses include drum enamels, aerosol finishes, and fast drying trade sale enamels. | |
| 4987-V-60VT Modified Alkyd Resin | Gabriel Performance Products | 4987-V-60VT Modified Alkyd Resin is a fast drying vinyl toluene modified alkyd resin intended for use in fast drying primers and enamels. Its adhesion and flexibility are very good and it can be used on a variety of surfaces including wood and metal. | |
| 4996 Long Oil Alkyd Resin | Gabriel Performance Products | 4996 Long Oil Alkyd Resin is intended for use as a plasticizer for hot melt coatings. | |
| 5009-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5009-BS-70 Water Reducible Alkyd Resin is a general purpose resin designed for air dry, force dry, or low temperature bake applications. This product is supplied at 70% non-volatiles. | |
| 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and...voir plus 5016-EP-70 Water Reducible Acrylic Modified Alkyd Resin at 70% non-volatile by weight in a mixed co-solvent system. It features a fast dry time and quick film hardness development and is formulated to give good exterior weathering, good initial gloss, and good gloss retention. voir moins | |
| 5017-M-60 Chlorendic Modified Alkyd Resin | Gabriel Performance Products | 5017-M-60 Chlorendic Modified Alkyd Resin is formulated to impart improved fire retardency and decreased dry time. | |
| 5018-X-50 Acrylic Modified Alkyd Resin | Gabriel Performance Products | 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retenti...voir plus 5018-X-50 Acrylic Modified Alkyd Resin is a fast drying acrylic modified alkyd resin intended for use in aerosol enamels, maintenance finishes, implement enamels, and automotive re-finish enamels. It should offer good exterior durability and gloss retention. voir moins | |
| 5060-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5060-BS-70 Water Reducible Alkyd Resin intended for use in air dry and force dry industrial finishes. It will give good corrosion and water resistance when properly formulated. | |
| 5063-BS-70 Water Reducible Alkyd Resin | Gabriel Performance Products | 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film...voir plus 5063-BS-70 Water Reducible Alkyd Resin is a fast drying chain-stopped water reducible alkyd resin intended for industrial and OEM finishes. Can be used in air dry and force dry finishes. This resin was formulated to be economical but offers very good film properties at the same time. voir moins | |
| 5113-V-60 Medium Oil Alkyd | Gabriel Performance Products | 5113-V-60 Medium Oil Alkyd is suitable for use in traffic and road marking paints. | |
| 5121-BC-85 Water Reducible Alkyd Resin | Gabriel Performance Products | 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an ...voir plus 5121-BC-85 Water Reducible Alkyd Resin which may be used in baking coatings. As supplied, the resin will require neutralization with an amine and some additional co-solvent before the addition of water. Sufficient co-solvent should be used to maintain an 80:20 ratio of water to co-solvent. For a baking coating, 12-30% of a melamine resin can be used for cross-linking. Co-solvent and/or melamines and neutralizer should be added to the resin and mixed completely before the addition of water. voir moins | |
| Disproportionated Rosin 1st Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abieti...voir plus Disproportionated Rosin 1st Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.5% and a softening point of 76°C. voir moins | |
| Disproportionated Rosin Extra Grade | Resin Chemicals Co., Ltd. | Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abie...voir plus Disproportionated Rosin Extra Grade is a raw material produced by isomerizing gum rosin with a catalyst. This product is commonly used as a polymer emulsification agent in the production of water-soluble pressure sensitive adhesives. It has a maximum abietic acid content of 0.1% and a softening point of 76°C. voir moins | |
| Fintac2331 Non-Crystallizing Rosin | Finjet Chemical Industries, Ltd. | Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water...voir plus Fintac2331 Non-Crystallizing Rosin, in the form of a solid or flake, is a modified rosin that offers good combination of crystallization resistance and oxidation. This product is applied as a tackifier for polymers, and has suggested applications in water-based adhesives, pressure sensitive sealants, and alcohol soluble printing inks and paints. voir moins | |
| Fintac2333 Modified Rosin Resin | Finjet Chemical Industries, Ltd. | Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also...voir plus Fintac2333 Modified Rosin Resin is a low odor, non-crystallization rosin resin that is used to formulate numerous kinds of water-based and hot melt adhesives, effectively improving their original low temperature property and adhesion. This product is also applicable for alcohol soluble paints and inks. voir moins | |
| Fintac5336 Polymerized Rosin | Finjet Chemical Industries, Ltd. | Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and pain...voir plus Fintac5336 Polymerized Rosin is a selectively polymerized rosin that has a higher softening point, good oxidation resistance, and higher heat resistance to adhesives. This product is mainly applied in adhesives, inks, synthetic resins, varnishes, and paints. voir moins | |
| Hydrogenated Rosin-A | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-A is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-B | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-B is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-C | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-C is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Hydrogenated Rosin-D | Resin Chemicals Co., Ltd. | Hydrogenated Rosin-D is a raw material that is commonly used in the manufacturing of adhesives, inks, and coatings. This product is transparent in appearance with a maximum abietic acid content of 2.0% and a softening point of 76°C. | |
| Polymerized Rosin | Resin Chemicals Co., Ltd. | Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesive...voir plus Polymerized Rosin is a modified product consisting of gum rosin and abietic type acids. This product is used to provide a high softening point, oxidation resistance, and high viscosity in organic solvents. It is commonly used in inks, oil paints, adhesives, and emulsifying agents. It is a transparent solid in appearance with a softening point of 140-165°C. voir moins | |
| Polytone AP 108 | Polyols and Polymers | Polytone AP 108 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...voir plus Polytone AP 108 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 108 is primarily used as an additive for rubber, upholstery, shoe, leather and many other types of adhesives. It is also used as an additive in coatings that provide strength and heat resistance. voir moins | |
| Polytone AP 109 | Polyols and Polymers | Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...voir plus Polytone AP 109 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 109 is primarily used to impart good open time combined with green tack and durability, and provides some heat resistance similar to Polytone AP 108 but not as strong of resistance. Polytone AP 109 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. voir moins | |
| Polytone AP 110 | Polyols and Polymers | Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. P...voir plus Polytone AP 110 is a para-tertiary butyl-phenol (PTBP) formaldehyde resin that is a part of the alkyl phenol family of organic compounds. This product is a heat reactive adhesive resin that has a pale yellow color and is delivered as small solid pieces. Polytone AP 110 is primarily used to impart good open time combined with green tack and durability, and provides heat resistance. Polytone AP 110 is used as an additive in rubber, upholstery, shoe, leather, automotive and many other adhesives along with strong enamels, coatings and varnishes. voir moins | |
| Refined Rosin Modified Resin GE-85L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is comm...voir plus Refined Rosin Modified Resin GE-85L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 85-88°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. voir moins | |
| Refined Rosin Modified Resin GE-90L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is comm...voir plus Refined Rosin Modified Resin GE-90L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 87-93°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. voir moins | |
| Refined Rosin Modified Resin PE-100L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is co...voir plus Refined Rosin Modified Resin PE-100L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 97-103°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. voir moins | |
| Refined Rosin Modified Resin PE-105L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is c...voir plus Refined Rosin Modified Resin PE-105L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 102-108°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. voir moins | |
| Refined Rosin Modified Resin PE-95L | Resin Chemicals Co., Ltd. | Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is comm...voir plus Refined Rosin Modified Resin PE-95L is a modified resin created from gum rosin through esterification with pentaerythritol and glycerol. It is a transparent to pale yellow bead or flake in appearance with a softening point of 92-98°C. This product is commonly used in the production and manufacturing of hot melt adhesives, pressure sensitive adhesives, and high class glues. voir moins | |
| Rosin Modified Resin GE85 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used ...voir plus Rosin Modified Resin GE85 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 85-89°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. voir moins | |
| Rosin Modified Resin GE90 | Resin Chemicals Co., Ltd. | Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used ...voir plus Rosin Modified Resin GE90 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 88-92°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. voir moins | |
| Rosin Modified Resin PE 105 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly us...voir plus Rosin Modified Resin PE105 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 103-107°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. voir moins | |
| Rosin Modified Resin PE100 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly use...voir plus Rosin Modified Resin PE100 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 98-102°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. voir moins | |
| Rosin Modified Resin PE95 | Resin Chemicals Co., Ltd. | Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used ...voir plus Rosin Modified Resin PE95 is a glycerol ester of gum rosin that is esterified by gum rosin and glycerol or pertaerythrite. It is a slightly yellow to transparent flake or bead in appearance with a softening point of 93-97°C. This product is commonly used as a raw material in applications such as hot melt adhesives, pressure sensitive adhesives, and glue. voir moins |
