| ADDITOL® VXW 6394 | Allnex | Agente humectante y de dispersión para concentrados de pigmento acuosos resina-libres. | Request Sample |
| BECKOPOX™ VEH 2849w/80WA | Allnex | Una aducto alifático de poliamina, acético, libre de ácido, transmitido por agua; es un endurecedor altamente reactivo para revestimientos reducibles al agua en substratos metálicos minerales, donde es importante el curado rápido y la liberación de agua. | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | Beckopox® EH 623W/80WA es un solvente a base de agua y agente de curado de epoxi poliamida sin ácido acético. Es un endurecedor para revestimientos reducibles con agua en sustratos minerales y metálicos, morteros epoxi hidráulicos (ECC). | Request Sample |
| ALNOVOL® PN 650/60B | Allnex | ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid impro...Vea Mas ALNOVOL PN 650/60B is designed to act as a modifier of heat curable phenolic/polyester resin combinations (BADGE-free & BPA-NI systems) and phenolic/epoxy resin formulas. An addition of 20 - 40% of ALNOVOL PN 650/60B as solid on total dry film solid improves the flexibility of the coating by maintaining the chemical resistance. Positive effects in regards to leveling and substrate adhesion could be observed as well. Application areas are the interior and exterior layer of metal packaging goods like collapsibletubes,cans and drums for water,oils and food. Vea Menos | Request Sample |
| Mirel™ 8000 Latex | Metabolix | Mirel™ 8000 Latex is a 55% suspension of semicrystalline Mirel™ biodegradable resin with a a particle size is 1-3 um and typical viscosity from 300-500 centipoise. Mirel™ 8000 coated paper is repulpable, compostable, marine and fresh water degradable. Mir...Vea Mas Mirel™ 8000 Latex is a 55% suspension of semicrystalline Mirel™ biodegradable resin with a a particle size is 1-3 um and typical viscosity from 300-500 centipoise. Mirel™ 8000 coated paper is repulpable, compostable, marine and fresh water degradable. Mirel™ 8000 can be coated onto paper using rod, blade, gravure or flexographic coating equipment. Mirel™ latex can also be used to coat particles as well giving them a hydrophobic surface while being inherently biodegradable. Mirel™ 8000 can also be used as a binder or resin in ink systems or architectual coatings. Vea Menos | |
| ADDAPT® Foamstop™ CC 11 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, pri...Vea Mas ADDAPT® Foamstop™ CC 11 is a proprietary blend of activated fatty acids and fatty alcohols. It is used as a foam control agent for emulsions based on PVAC, VA/VEOVA, Styrene/Acrylics or pure Acrylics. This product has applications in adhesives, paint, printing ink, floor polish, and waste-water treatment. Vea Menos | |
| HIKOTACK P-110S | Kolon | HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete c...Vea Mas HIKOTACK P-110S is a pale yellow thermoplastic resin which is primarily used as a vehicle in the coating industry and as a tackifier for Ethylene Vinyl Acetate based hot melt adhesives. HIKOTACK P-110S can be also used as water repellent agent, concrete curing agent and binder for asphalt. Vea Menos | |
| C9-8 | SWISLOYD LIMITED | C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...Vea Mas C9-8 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. Vea Menos | |
| C9-10 | SWISLOYD LIMITED | C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...Vea Mas C9-10 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. Vea Menos | |
| C9-12 | SWISLOYD LIMITED | C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing in...Vea Mas C9-12 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. Vea Menos | |
| CRYLCOAT® 4669-0 | Allnex | CRYLCOAT® 4669-0 is a high performance, carboxylated, superdurable polyester resin for use with Primid® XL 552 in the architectural coatings segment. Coatings based on CRYLCOAT® 4669-0 exhibit good flow, high degree of outdoor durability, are free of bloo...Vea Mas CRYLCOAT® 4669-0 is a high performance, carboxylated, superdurable polyester resin for use with Primid® XL 552 in the architectural coatings segment. Coatings based on CRYLCOAT® 4669-0 exhibit good flow, high degree of outdoor durability, are free of blooming and offer improved water-spot resistance meeting GSB and Qualicoat standards. Vea Menos | Request Sample |
| C9-7 | SWISLOYD LIMITED | C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing ink...Vea Mas C9-7 is an aromatic hydrocarbon resin that appears as light-yellow granules or flakes. This product has a softening point at 111°C-120°C and pH value that range from 5-8. It has resistant to water and ethanol, and is primarily used in paints, printing inks, and adhesives. Vea Menos | |
| Crestacryl® 71-9078 | Scott Bader | Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for...Vea Mas Crestacryl® 71-9078 is a high quality thermoplastic acrylic resin, which gives rapid solvent release, very good elasticity, excellent adhesion on various metallic substrates and very good alkali and water resistance. It can be used as universal binder for metal paints, wood coatings, road marking paints, masonry paints and concrete. Vea Menos | |
| CRYLCOAT® 2609-6 | Allnex | CRYLCOAT® 2609-6 is a high reactive, tribo active carboxyl functional polyester resin for use with 5% HAA hardener in low bake (12 min x 160°C object temperature) formulations for architectural applications. Coatings based on CRYLCOAT® 2609-6 are blooming...Vea Mas CRYLCOAT® 2609-6 is a high reactive, tribo active carboxyl functional polyester resin for use with 5% HAA hardener in low bake (12 min x 160°C object temperature) formulations for architectural applications. Coatings based on CRYLCOAT® 2609-6 are blooming resistant and exhibit improved outdoor durability and water-spot resistance. Vea Menos | Request Sample |
| ADDITOL® XW 376 | Allnex | Antiespumante para las pinturas de emulsión transmitidas por agua y adhesivos, y enlucidores ligados con resina sintética. | Request Sample |
| ADDAPT® Foamstop™ VF 10N | ADDAPT Chemicals BV | ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, prin...Vea Mas ADDAPT® Foamstop™ VF 10N is a proprietary blend of components based on renewable resources. It is used as a VOC-free foam control agent for low-VOC emulsions based on PVAC, Styrene/Acrylics and pure Acrylics. This product is used in paint, adhesives, printing ink, floor polish, lubricants, and waste-water treatment. Vea Menos | |
| Bitoner® H-100 | Qingdao Bater Chemical Co., Ltd. | Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has re...Vea Mas Bitoner® H-100, in the form of a white granular, is thermoplastic hydrogenated aromatic resin obtained from petroleum-derived monomers. It has good thermal resistance, low odor, water resistance, and good compatibility with SBS, SIS, and EVA. H-100 has recommended applications in solvent adhesives, plastic modification, hot melt adhesives, and wax modification. Vea Menos | |
| SETALUX® 17-1015 | Allnex | SETALUX® 17-1015 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt sp...Vea Mas SETALUX® 17-1015 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is expected to be excellent. Vea Menos | Request Sample |
| DUROXYN® VEF 2406w/45WA | Allnex | Un epoxi-resina-éster acuoso catiónico, diseñado para la producción de revestimientos -base de 1 comp., con sequedad rápida y alta dureza de película. | Request Sample |
| ADDITOL® VXW 6206 | Allnex | Un secador emulsionado, libre de nonilfenilletoxilato, combinación de cobalto, litio y zirconio. | Request Sample |
| CHEMREZ 30 | Univar Solutions | CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin...Vea Mas CHEMREZ 30 is a versatile vehicle with exceptional pigment wetting, gloss and transfer properties, and is recommended for use as a pigment dispersant as well as a general vehicle for water based inks and varnishes. It can be used as a grinding vehicle and/or a let-down vehicle. As grinding vehicle it is the major component and is used in an approximate 2:1 ratio of resin solution to dry pigment. CHEMREZ 30 has been used with a wide range of organic pigments as well as carbon black. CHEMREZ 30 as a letdown vehicle can be used upwards of 50% of the formulation. Vea Menos | Request Sample |
| HydriPrint 150 | Hydrite Chemical Co. | HydriPrint 150 is a emulsion polymer featuring stable viscosity over a wide pH range. This product is well suited for use in water-based inks. | |
| MODAFLOW® AQ 3025 | Allnex | Modaflow® AQ 3025 es un aditivo de flujo de acrílico para revestimientos acuosos, sin adición de silicona. Se ha desarrollado para el uso en sistemas de dispersión reducibles en agua, látex, y es compatible con una amplia gama de sustancias químicas. | Request Sample |
| JONCRYL® 62 | BASF Dispersions & Resins | Joncryl® 62 is a solution of Joncryl® 67, a high molecular weight dispersion resin for pigment dispersions and printing ink applications. | |
| HydriPrint 376 | Hydrite Chemical Co. | HydriPrint 376 is a hard film forming polymer formulated for fast drying and good resolubility. This product is well suited for use in water-based inks. | |
| TEGO® Humectant 7005 | Evonik Operations GmbH, BL Coating Additives | TEGO® Humectant 7005 is a humectant for resin-free pigment concentrates. It does not contribute to VOCs and its influence on coating properties is very low. | Request Sample |
| SETALUX® 27-1741 | Allnex | SETALUX® 27-1741 is a low VOC hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to...Vea Mas SETALUX® 27-1741 is a low VOC hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is expected to be excellent. Vea Menos | Request Sample |
| Lucidene 141 | Hydrite Chemical Co. | Lucidene 141 is a fast drying polymer featuring excellent rewetting. This product is well suited for use in water-based printing inks, especial in low basis weight paper applications. | |
| Ottopol K-362 | Gellner Industrial, LLC | Ottopol K-362 is a slightly hazy cationic acrylic resin solution in water. It is a low molecular weight cationic acrylic resin solutions. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down...Vea Mas Ottopol K-362 is a slightly hazy cationic acrylic resin solution in water. It is a low molecular weight cationic acrylic resin solutions. It is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with this product to produce printing inks and coatings. A clear coating or overlay varnish may be formulated as well. Due to its positive charge, Ottopol K-362 allows inks and coatings to have excellent adhesion to plastic films such as mylar, PVC, and polystyrene, as well as to foil and other metallic surfaces. Vea Menos | |
| DUROXYN® VEF 4380w/35WA | Allnex | Ester de resina epoxi de secado oxidativo en forma de emulsión acuosa. | Request Sample |
| CYMEL® 385 | Allnex | La resina CYMEL® 385 es una resina de melamina metilada, de alta funcionalidad de iminas, con bajo grado de alquilación. Se suministra en agua y se recomienda como agente de reticulación para polímeros de emulsión con hidroxilo y otros sistemas acuosos q...Vea Mas La resina CYMEL® 385 es una resina de melamina metilada, de alta funcionalidad de iminas, con bajo grado de alquilación. Se suministra en agua y se recomienda como agente de reticulación para polímeros de emulsión con hidroxilo y otros sistemas acuosos que contienen hidroxilo y funcionalidad de amidas. Tiene una alta tendencia a la autocondensación y puede utilizarse para aumentar las propiedades de dureza y resistencia de polímeros termoplásticos a base de agua. Vea Menos | Request Sample |
| RESYDROL® VAF 5540w/70MP | Allnex | Resydrol® VAF 5540W/70MP es una resina alquídica sin secado, después de la neutralización con aminas reducibles en agua. Es una resina adicional para imprimaciones diluibles en agua para mejorar la nivelación. | Request Sample |
| VIACRYL® VSC 6800w/47WA | Allnex | Viacryl® VSC 6800W/47WA es una emulsión copolímera hidroxi funcional, modificada con poliéster, a base de agua. En combinación con resinas reactivas de melamina (por ejemplo, Cymel 327 o Cymel 328), Viacryl® VSC 6800W/47WA proporciona esmaltes industriale...Vea Mas Viacryl® VSC 6800W/47WA es una emulsión copolímera hidroxi funcional, modificada con poliéster, a base de agua. En combinación con resinas reactivas de melamina (por ejemplo, Cymel 327 o Cymel 328), Viacryl® VSC 6800W/47WA proporciona esmaltes industriales brillosos, sin amarilleo. Vea Menos | Request Sample |
| CYMEL® 323 | Allnex | La resina CYMEL® 323 es un agente reticulante metilado de alta imino melamina suministrada en isobutano. El excepcional grado elevado de reactividad combinado con una muy buena apariencia de rigidez y la baja liberación de formaldheídos durante la cura ha...Vea Mas La resina CYMEL® 323 es un agente reticulante metilado de alta imino melamina suministrada en isobutano. El excepcional grado elevado de reactividad combinado con una muy buena apariencia de rigidez y la baja liberación de formaldheídos durante la cura hacen que la resina CYMEL® 323 sea idónea para las formulaciones al agua y a base de disolventes con poco horneado. Vea Menos | Request Sample |
| ADDAPT® Foamstop™ MP 72 | ADDAPT Chemicals BV | ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This ...Vea Mas ADDAPT® Foamstop™ MP 72 is a proprietary blend of synthetic ester, biodegradable polyalkylene glycols and a small amount of aliphatic alcohols. It is used as a foam control agent in low-VOC emulsions based on PVAC, Styrene/Acrylics or pure Acrylics. This product is used in paint, adhesives, printing inks, floor polish, lubricants, and waste-water treatment. Vea Menos | |
| Flex-rez™ 1074CS A | Lawter | Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The pr...Vea Mas Flex-rez™ 1074 CS A is a co-solvent soluble polyamide resin that has high gloss with a low viscosity and fast solvent release. It is also grease, alkali, lard and water resistant and possesses good adhesion, flexibility and film-forming properties. The product is used in gravure and flexographic inks, overprint varnishes and cold seal release lacquers. Vea Menos | |
| Cinergi™ 100 A | Lawter | Cinergi™ 100 A is a medium quickset gel varnish from highly structured resin systems and is considered a sheet-fed vehicle. The product displays great synergy and compatibility with a variety of flush color systems. Inks using the product show better colo...Vea Mas Cinergi™ 100 A is a medium quickset gel varnish from highly structured resin systems and is considered a sheet-fed vehicle. The product displays great synergy and compatibility with a variety of flush color systems. Inks using the product show better color development, gloss and water balance. Cinergi™ 100 A is commonly used in sheet-fed applications Vea Menos | |
| Paracryl® PC-8340 | Royal Coatings & Specialty Polymers (Para-Chem) | Paracryl® PC-8340 is a paracryl paper & board vehicles polymer. This product is used in water based inks and coatings for calendared paper and board as well as metallized substrates. | |
| SETAL® 41-1390 | Allnex | SETAL® 41-1390 exhibits the desirable properties of positive dry, good corrosion resistance and good mechanical properties. This resin is reduced in a "low HAP" type solvent blend. | Request Sample |
| ADDITOL® VXW 6386 | Allnex | Antiespumante a base de hidrocarburos especiales, sin la adición de silicón. | Request Sample |
| ADDITOL® VXW 6208 | Allnex | Aditivo de dispersión no iónico de polímero para el molido de pigmentos inorgánicos y orgánicos, en agua o en resina de alquido transmitida por agua, acrílico, epóxido, y emulsiones de uretano. | Request Sample |
| TEGO® Dispers 750 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 750 W es un aditivo humectante polimérico y de dispersión de alto rendimiento con excelente estabilización de pigmentos. Es una solución acuosa, líquida, de color claro, amarillento, de un copolímero con grupos de afinidad de alto contenido de pigmentos. TEGO® Dispers 750 W humecta y estabiliza todo tipo de pigmentos con buena compatibilidad y prácticamente no afecta la estabilidad. Es adecuado para concentrados de pigmentos a base de agua, de molienda directa, sin resina y a base de resin...Vea Mas TEGO® Dispers 750 W es un aditivo humectante polimérico y de dispersión de alto rendimiento con excelente estabilización de pigmentos. Es una solución acuosa, líquida, de color claro, amarillento, de un copolímero con grupos de afinidad de alto contenido de pigmentos. TEGO® Dispers 750 W humecta y estabiliza todo tipo de pigmentos con buena compatibilidad y prácticamente no afecta la estabilidad. Es adecuado para concentrados de pigmentos a base de agua, de molienda directa, sin resina y a base de resina. Vea Menos | Request Sample |
| DUROXYN® VAX 6127w/42WA | Allnex | Ester de resina epoxi de secado oxidativo en forma de emulsión acuosa. Excelente resistencia a la corrosión, estabilidad en el agua muy buena, buena capacidad de repintado. | Request Sample |
| JONCRYL® 633 | BASF Dispersions & Resins | Joncryl® 633 is a hard acrylic emulsion that enables the formulation of water-based inks that look cleaner and brighter on brown kraft, mottled white and other non-coated paper and paperboard substrates. Joncryl® 633 allows for better quality graphics on ...Vea Mas Joncryl® 633 is a hard acrylic emulsion that enables the formulation of water-based inks that look cleaner and brighter on brown kraft, mottled white and other non-coated paper and paperboard substrates. Joncryl® 633 allows for better quality graphics on press, multiple colors with minimal trapping, and high ink transfer, as well as good water and rub resistance. Joncryl® 633 can also be used to reduce the amount of TiO2 needed in white inks due to its high opacity. Vea Menos | |
| CYMEL® 373 | Allnex | Un agente de reticulación metilado de melamina-formaldehído con un grado medio de alquilación, con un contenido de metilol de medio a alto y baja funcionalidad de imino. | Request Sample |
| EDAPLAN® LA 452 | Munzing Chemie | EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin...Vea Mas EDAPLAN® LA 452 is a yellow liquid wetting and leveling agent for aqueous systems. EDAPLAN® LA 452 reduces the surface tension of aqueous systems without increasing the foam formation. Thus substrate wetting, leveling and gloss are improved. EDAPLAN® LA 452 is free of silicone and has no adverse effects on recoatability. This additive is compatible with all common resin systems. Advantages of using EDAPLAN® LA 452 include gloss improvement and reduction of haze, prevention of surface defects like craters and Bénard cells, improvement of substrate wetting, no increase in foam, and good recoatability. Main application areas include architectural coatings, wood and furniture coatings, automotive OEM and repair coatings, industrial coatings, and printing inks and overprint varnishes. Vea Menos | |
| TEGO® Dispers 757 W | Evonik Operations GmbH, BL Coating Additives | TEGO® Dispers 757 W es un aditivo polimérico humectante y de dispersión, de alto rendimiento, con excelente resistencia al agua. Es una solución acuosa líquida transparente a ligeramente turbia de un copolímero con grupos de afinidad de alto contenido de pigmentos. TEGO® Dispers 757 W se utiliza en concentrados de pigmentos a base de agua, de molienda directa, sin resina y a base de resin...Vea Mas TEGO® Dispers 757 W es un aditivo polimérico humectante y de dispersión, de alto rendimiento, con excelente resistencia al agua. Es una solución acuosa líquida transparente a ligeramente turbia de un copolímero con grupos de afinidad de alto contenido de pigmentos. TEGO® Dispers 757 W se utiliza en concentrados de pigmentos a base de agua, de molienda directa, sin resina y a base de resina con alta intensidad de color y baja influencia en las propiedades de los revestimientos. Además, proporciona una alta reducción de la viscosidad con pigmentos orgánicos e inorgánicos. Vea Menos | Request Sample |
| Lucidene 605 NV | Hydrite Chemical Co. | Lucidene 605 NV is an emulsion that displays outstanding adhesion, water resistance, and low VOC content. This product is well suited for use in water-based inks and coatings. | |
| MACRYNAL® SM 6810w/42WA | Allnex | Macrynal® SM 6810W/42WA es una resina acrílica hidroxi-funcional acuosa. Se combina con poliisocianatos emulsionables en agua para obtener acabados de dos componentes de alta calidad con excelente aplicabilidad y aspecto. | Request Sample |
| TEGO® Phobe 1650 | Evonik Operations GmbH, BL Coating Additives | TEGO® Phobe 1650 es una emulsión de resina de silicona para la hidrofobicidad de revestimientos para fachadas. Es una emulsión líquida blanca de una resina de polisiloxano modificado. Tiene una excelente resistencia al agua, baja acumulación de suciedad y...Vea Mas TEGO® Phobe 1650 es una emulsión de resina de silicona para la hidrofobicidad de revestimientos para fachadas. Es una emulsión líquida blanca de una resina de polisiloxano modificado. Tiene una excelente resistencia al agua, baja acumulación de suciedad y una fuerte reducción de la absorción de agua por capilaridad con reducidas cantidades. TEGO® Phobe 1650 es altamente adecuado para la hidrofugación de sistemas pigmentados y a base de agua. Se recomienda agregar el producto en la fase de molienda antes de la fase de bajada. Puede añadirse en la forma en que se suministra o prediluido. Vea Menos | Request Sample |
| Filtrez™ 526 A | Lawter | Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. F...Vea Mas Filtrez™ 526 A is a fumaric modified rosin ester that is soluble in alcohol and because it needs minimal amine due to the low acid value, it shows a faster drying time. Its high viscosity in water results in lower resin solids emerging in the final ink. Filtrez™ 526 A is suitable for use in gravure and flexographic inks and coatings. Vea Menos | |
| BC 403 | Basildon Chemical Company Ltd. | BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...Vea Mas BC 403 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.03. Vea Menos | |
| SETALUX® 57-1608 | Allnex | SETALUX 57-1608 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spr...Vea Mas SETALUX 57-1608 is a hydroxy functional acrylic resin designed for use with aliphatic isocyanate resins in two-component systems. These systems produce ambient curing high performance coatings. Laboratory testing indicates excellent resistance to salt spray, water soak and humidity. Based on accelerated weathering tests, exterior durability is excellent. SETALUX 57-1608 is SETALUX 17-1608 in t-butyl acetate. Vea Menos | Request Sample |
| JONCRYL® HPD 96MEA | BASF Dispersions & Resins | Joncryl® HPD 96MEA is a high performance acrylic resin solution for pigment dispersion applications. | |
| BECKOPOX™ VEH 2177w/80WA | Allnex | Beckopox® VEH 2177W/80WA es un ácido no acético a base de agua que contiene aducto de poliamina alifática que se utiliza junto con dispersiones de resinas epoxi sólidas o resinas líquidas emulsionadas. | Request Sample |
| CYMEL® U-65 | Allnex | La resina CYMEL® U-65 es una resina de urea metilada, con alto contenido de sólidos, diseñada para usar en sistemas solubles en solventes orgánicos y en agua como agente reticulante para una variedad de polímeros que contienen hidroxil. | Request Sample |
| BECKOPOX™ EP 2350w/60WA | Allnex | Beckopox® EP 2350W/60WA es una dispersión de resina epoxi sólida en agua con mejor resistencia química. | Request Sample |
| RESYDROL® AY 586w/42WA | Allnex | Resydrol® AY 586W/42WA es una resina alquídica de aceite, de núcleo-coraza, de secado por oxidación, suministrada en forma de emulsión acuosa. Es un aglutinante único para la formulación de pinturas decorativas a base de agua, tintas exteriores para mader...Vea Mas Resydrol® AY 586W/42WA es una resina alquídica de aceite, de núcleo-coraza, de secado por oxidación, suministrada en forma de emulsión acuosa. Es un aglutinante único para la formulación de pinturas decorativas a base de agua, tintas exteriores para madera y acabados industriales. Vea Menos | Request Sample |
| CYMEL® 350 | Allnex | La resina CYMEL® 350 es una resina de melamina monomérica, altamente metilada, recomendada para usar en sistemas a base de agua y a base de solventes. Tiene muy buenas propiedades de solubilidad en agua, lo que facilita su incorporación con excelente esta...Vea Mas La resina CYMEL® 350 es una resina de melamina monomérica, altamente metilada, recomendada para usar en sistemas a base de agua y a base de solventes. Tiene muy buenas propiedades de solubilidad en agua, lo que facilita su incorporación con excelente estabilidad en sistemas de emulsión, debido a que permanece en la fase de agua y no migra a la fase de polímeros. Es un agente reticulante muy eficiente y se recomienda para revestimientos de bobinas y sistemas de alto contenido de sólidos. La resina CYMEL® 350 tiene una respuesta de curado ligeramente menor que otras resinas de melanina monoméricas metiladas. Esto proporciona excelentes características de flujo y nivelación y menos estallidos de solventes en el curado. Vea Menos | Request Sample |
| JONCRYL® DFC 3025 | BASF Dispersions & Resins | Joncryl® DFC 3025 is a solution of a mid-range molecular weight acrylic resin. It provides gloss, holdout, and resolubility to inks and overprint varnishes for direct food contact applications. | |
| JONCRYL® 89 | BASF Dispersions & Resins | Joncryl® 89 is a general purpose, non film forming styrenated acrylic emulsion that provides gloss & clarity, block resistance and fast drying properties to overprint varnish formulations. | |
| BECKOPOX™ EP 2384w/57WA | Allnex | Beckopox EP 2384w es una resina de epoxi sólida como dispersión acuosa del tipo 1. Formulada junto con agentes endurecedores adecuados tales como Beckopox EH 623w, EH 659w, VEH 2188w o VEH 2177w; resulta en sistemas de revestimiento de secado rápido para ...Vea Mas Beckopox EP 2384w es una resina de epoxi sólida como dispersión acuosa del tipo 1. Formulada junto con agentes endurecedores adecuados tales como Beckopox EH 623w, EH 659w, VEH 2188w o VEH 2177w; resulta en sistemas de revestimiento de secado rápido para substratos minerales y de metal. La propiedad de secado rápida hace posible el aplicar revestimientos en el curso de un día de trabajo. Vea Menos | Request Sample |
| RESYDROL® VAF 6111w/60WA | Allnex | Resydrol® VAF 6111W/60WA resina alquídica de secado por oxidación suministrada como emulsión acuosa, sin aminas ni amoníaco. Es especialmente adecuada para pinturas ligeras a base de agua semi brillantes y brillantes para madera, paredes y cielorrasos. | Request Sample |
| TAMOL™ 983 | Univar Solutions | TAMOL™ 983 is a versatile, low-cost, low foaming, 35% solids, water-soluble polyacid dispersant in potassium form. It is recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl-acrylic formulations and is effective over a pH r...Vea Mas TAMOL™ 983 is a versatile, low-cost, low foaming, 35% solids, water-soluble polyacid dispersant in potassium form. It is recommended for low sheen flat through semi-gloss acrylic, styrene-acrylic and vinyl-acrylic formulations and is effective over a pH range of 7 to 11 with a wide temperature range. It is highly compatible with anionic HASE associative rheology modifiers providing excellent heat age and viscosity stability. It has excellent color acceptance with glycol and water dispersed colorants, including hard to disperse pigments such as red iron oxide. Vea Menos | Request Sample |
| HydriCryl 132 | Hydrite Chemical Co. | HydriCryl 132 is a gloss, block, transfer, and resolubility modifier. This product is well suited for use in water-based ink and coatings. | |
| HydriCryl 410 | Hydrite Chemical Co. | HydriCryl 410 is an emulsion polymer optimized for high pigment load dispersion applications. This product is well suited for use in water-based inks and coatings. | |
| Texicryl® 13-828 | Scott Bader | Texicryl® 13-828 is a higly efficient alkali swellable emulsion designed for waterbased printing ink formulations. Flexographic inks for corrugated board. Suitable as a pigment grinding medium and let down vehicle. | |
| JONCRYL® LMV 7085 | BASF Dispersions & Resins | Joncryl® LMV 7085 is a low maintenance, pH stable, acrylic resin solution designed to optimize the dispersion of organic pigments for use in Joncryl® LMV 7000 series-based inks. | |
| JONCRYL® 82 | BASF Dispersions & Resins | Joncryl® 82 is an ultra low VOC, styrene-free acrylic emulsion for functional packaging coating applications. | |
| PEL-SIL CL290 | Ele Corporation | PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin...Vea Mas PEL-SIL CL290 is an organo-modified silicone-based additive consisting of a siloxane backbone and polyethylene-oxide (EO) and polypropylene oxide (PO) side chains. PEL-SIL CE 390 has recoatability and low tendency to foam. It is good compatibility with many resin systems. PEL-SIL CL290 is an excellent silicone-based additive for improving slip and mar esistance and reducing friction coefficient for solvent-borne, water-borne, and UV/EB cured coating systems. It can be used for coatings in industrial and auto, wood, and overprint vanishes and inks. Vea Menos | |
| Eco-Set™ 4500 A | Lawter | Eco-Set™ 4500 A is a flushing and pigment grinding sheet-fed vehicle which offers pigment dispersal in a more natural state using the phenol fomaldehyde-free resin system. The product has high renewable content, is fast setting with good gloss and water/i...Vea Mas Eco-Set™ 4500 A is a flushing and pigment grinding sheet-fed vehicle which offers pigment dispersal in a more natural state using the phenol fomaldehyde-free resin system. The product has high renewable content, is fast setting with good gloss and water/ink balance. It is ideal for use in commercial heatset inks, in packaging heatset inks, and in letterpress and insert inks. Vea Menos | |
| Reactol™ 1111 E | Lawter | Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and aceta...Vea Mas Reactol™ 1111 E is a pure phenolic resin with good alcohol solubility and color retention and which is quick drying and resistant to alkalis, water, weathering and abrasion. It is soluble in ketones, aromatic hydrocarbons, aliphatic hydrocarbons and acetates when combined with drying oils. Reactol™ 1111 E is used in weather-resistant finishes, in cold-mix and spar varnishes and in flexo and gravure inks and lacquers. Vea Menos | |
| Flex-Rez™ 1155AS A | Lawter | Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is...Vea Mas Flex-Rez™ 1155AS A is a polyamide resin with 100% solids and has good pigment wetting, gloss, adhesion and film-forming properties. It also shows good gel resistance as well as water, lard, oil, grease and alkali resistance features. Flex-Rez™ 1155AS A is suitable for use in flexo/gravure inks for plastics and foils, in cold seal release lacquers and in coatings and overprint varnishes. Vea Menos | |
| Picassian® PU-559 | Stahl Polymers | Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides g...Vea Mas Picassian® PU-559 is a non reactive, moderately tough, aliphatic, polyether modified polyurethane resin. It is used in high performance flexo inks, high performance gravure inks, and non yellowing nitrocellulose based gravure inks. This product provides good adhesion properties when used on polyolefin flims, has good compatibility with many kinds of resins, has good resistance properties with water, and many types of fat and oil. Vea Menos | |
| PENTAERYTHRITOL ESTER OF GUM ROSIN 100 (PM-005) | PT. NASCO | PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insol...Vea Mas PENTAERYTHRITOL ESTER OF GUM ROSIN 100 is a high softening point thermoplastic resin made of Gum Rosin and Pentaerythritol. It is soluble in aromatic solvents, aliphatic hydrocarbon solvents, esters, ketones, and chlorinated solvents, however, it is insoluble in methanol, ethanol, isopropanol, and water. It is well suited for the adhesive industry due to is weak odor, excellent heat stability and great adhesion properties and also it’s compatibility with many kinds of polymers. Vea Menos | |
| CYMEL® 303 LF | Allnex | La resina CYMEL® 303 LF es un agente reticulante de melamina monomérica, altamente metilado, suministrada en forma líquida. Su punto de alquidación y la baja tendencia a la autocondensación hacen que este producto sea un agente de reticulación altamente e...Vea Mas La resina CYMEL® 303 LF es un agente reticulante de melamina monomérica, altamente metilado, suministrada en forma líquida. Su punto de alquidación y la baja tendencia a la autocondensación hacen que este producto sea un agente de reticulación altamente efectivo para una amplia gama de aplicaciones como revestimientos industriales de latas, envases, del sector automotriz y generales. Si bien la resina CYMEL® 303 LF es soluble en agua, presenta una excelente compatibilidad con polímeros de cadena principal solubles en agua y proporciona muy buena estabilidad en formulaciones estabilizadas con aminas a base de agua. Vea Menos | Request Sample |
| CYMEL® 1123 | Allnex | La resina CYMEL® 1123 es una resina de benzoguanamina altamente metilada/etilada desarrollada principalmente para su uso como agente de reticulación en cataforesis y revestimientos convencionales que requieren alta resistencia química y a detergentes. Su ...Vea Mas La resina CYMEL® 1123 es una resina de benzoguanamina altamente metilada/etilada desarrollada principalmente para su uso como agente de reticulación en cataforesis y revestimientos convencionales que requieren alta resistencia química y a detergentes. Su excelente equilibrio entre la adhesión y la flexibilidad de la película, especialmente después de varios ciclos de curado, lo hace especialmente adecuado para aplicaciones de revestimientos de latas. Si bien es insoluble en agua, este producto muestra una excelente compatibilidad con polímeros de cadena principal solubles en agua y proporciona muy buena estabilidad en formulaciones alcalinas a base de agua con pH tamponado. Vea Menos | Request Sample |
| BENTONE® DE | Elementis | BENTONE® DE es una arcilla hectorita en polvo hiperdispersible altamente enriquecida. | |
| HydriCryl 430 | Hydrite Chemical Co. | HydriCryl 430 is a high gloss polymer with good resolubility and transfer when used in neutral pH systems. This product is well suited for use in water-based inks and coatings. | |
| HydriCryl 460 | Hydrite Chemical Co. | HydriCryl 460 is a emulsion polymer that displays maximum pigment wetting and high pigment loads at stable low viscosity. This product is well suited for use in water-based inks and coatings. | |
| MACRYNAL® VSM 2521w/42WAB | Allnex | Macrynal® VSM 2521W/42WAB es una resina acrílica reactiva a base de agua que contiene grupos hidróxilos para usar en capas de protección de alta calidad transparentes y pigmentados en sistemas de dos componentes de secado por aire y horneado. | Request Sample |
| RESYDROL® AF 502w/35WA | Allnex | Resydrol® AF 502W/35WA es una resina alquídica modificada de ácido graso, diluible en agua, en emulsión de agua pura. Se utiliza para sistemas de horneado de cuerpo abundante en acabados de una sola capa y acabados decorativos. | Request Sample |
| RESYDROL® VAY 6096w/39WA | Allnex | Resydrol® VAY 6096W/39WA es una resina alquídica modificada con acrílico, de secado por oxidación y poco aceite en una emulsión acuosa. Es un aglutinante único para formular sistemas de revestimientos industriales de secado extremadamente rápido. | Request Sample |
| AEROSIL® R 816 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, ...Vea Mas AEROSIL® R 816 es un sílice ahumado tratado posteriormente con un hexadecilsilano a base de AEROSIL® 200. Se utiliza en sistemas de revestimiento a base de agua. AEROSIL® R 816 se puede aplicar en sistemas de revestimientos como agente antisedimentación, para estabilizar los pigmentos y para optimizar el efecto de protección contra la corrosión. Además, ofrece un eficaz control reológico en sistemas líquidos complejos. Vea Menos | Request Sample |
| BC 404 | Basildon Chemical Company Ltd. | BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin...Vea Mas BC 404 is a silicone glycol that is used as a flow additive in paints, inks, and coatings. It is also used in lubricants, release agents, antifoams, and textile finishes. This product has antistatic attributes, is easily soluble in cool water and in resin systems, and provides lubrication and slip properties to a variety of substrates. It has a specific gravity of 1.06, and an INCI name of PEG-8 Dimethicone. Vea Menos | |
| Alkipol 380-50 T | Polidur San Luis | Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 ...Vea Mas Alkipol 380-50 T is a medium oil alkyd resin modified with TDI at 50% in xilol-naphta. This product has excellent air drying properties, excellent final film hardness, good water and salt fog resistance and excellent dielectric properties. Alkipol 380-50 T has applications in fast air drying enamels, varnishes for electrical uses, fast air dry corrosion resistant primers and is an air dry modifier for medium oil alkyd resins. Vea Menos | |
| ADDITOL® VXW 6396 | Allnex | Agente de flujo y de nivelacion para sistemas de pintura transmitidos por agua, sin la adición de silicón. Un copolímero de resina de acrílico fluoreno-modificado, neutralizado con amina. Mejora la nivelación y la humectación de sustrato. | Request Sample |
| 2-Mercaptoethanol | BASF SE, Intermediates Division | Los campos de la aplicación para este producto son: estabilizador de tipo estaño, agente de transferencia de cadena en procesos de polimerización, y sistemas anticorrosión para campos petrolíferos. El mercaptoetanol se utiliza en la producción de resin...Vea Mas Los campos de la aplicación para este producto son: estabilizador de tipo estaño, agente de transferencia de cadena en procesos de polimerización, y sistemas anticorrosión para campos petrolíferos. El mercaptoetanol se utiliza en la producción de resinas de acrílico de revestimientos transmitidas por el agua. Vea Menos | |
| Soluryl R-20B | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-20B is a mid Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended in paper coating and let down vehicle for carton paper. | |
| Soluryl R-90 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-90 is a high Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended in paper coating and Let down vehicle for carton paper. | |
| Soluryl R-92 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-92 is a high Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended for paper coating and let down vehicle for carton paper. | |
| Soluryl R-9020 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-9020 is a high Tg emulsion for water-based products and is compatible with a wide range of other acrylics. It is recommended for paper coating and let down vehicle for carton paper. | |
| Soluryl R-9061 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-9061 is a high Tg emulsion for water-based products that is compatible with a wide range of other acrylics. It is recommended for paper coating and let down vehicle for carton paper. | |
| MACRYNAL® VSM 6299w/42WA | Allnex | Macrynal® VSM 6299W/42WA es una resina acrílica acuosa, hidroxi funcional. Se utiliza en combinación con poliisocianatos emulsionables en agua para lograr acabados de dos componentes de alta calidad con excelente desarrollo de la dureza cuando se seca a t...Vea Mas Macrynal® VSM 6299W/42WA es una resina acrílica acuosa, hidroxi funcional. Se utiliza en combinación con poliisocianatos emulsionables en agua para lograr acabados de dos componentes de alta calidad con excelente desarrollo de la dureza cuando se seca a temperatura ambiente y muy buen brillo. Vea Menos | Request Sample |
| ADDITOL® XW 6533 | Allnex | Combinación de secador, libre de cobalto, agua-emulsionable. | Request Sample |
| RESYDROL® AM 224w/40WA | Allnex | Resydrol® AM 224W/40WA es una resina alquídica modificada de ácido graso diluible en agua. Por lo tanto, se recomienda para el uso de pastas de pigmento. | Request Sample |
| Soluryl R-20 | Hanwha Chemical (Thailand) Co., Ltd. | Soluryl R-20 is a low Tg emulsion for water-based products that is compatible with a wide range of other acrylics. It is recommended for use as paper coating and let down vehicle for carton paper. | |
| RESYDROL® AX 250w/75EP | Allnex | Resydrol® AX 250W/75EP es un éster de resina epoxi modificada de ácidos grasos, diluible en agua. Proporciona excelente humectación de pigmentos, alta protección contra la corrosión y muy buena reactividad con resinas de melamina. | Request Sample |
| RESYDROL® AX 237w/70BG | Allnex | Resydrol® AX 237W/70BG es un éster de resina epoxi de secado oxidativo diluible en agua. Es un aglutinante único para revestimientos de protección anticorrosiva de secado por aire. | Request Sample |
| ADDITOL® XW 6569 | Allnex | ADDITOL® XW 6569 es un desespumador de silicona modificado. Está libre de emulsionantes y no tiene influencia en los modificadores reológicos o en la estabilidad de resina. Este desespumador altamente efectivo es fácil de incorporar en todos los sistemas ...Vea Mas ADDITOL® XW 6569 es un desespumador de silicona modificado. Está libre de emulsionantes y no tiene influencia en los modificadores reológicos o en la estabilidad de resina. Este desespumador altamente efectivo es fácil de incorporar en todos los sistemas de pintura al agua. Vea Menos | Request Sample |
