| CN104Z | Sartomer Americas | CN104Z es un acrilato epoxi disfuncional. Brinda un buen equilibrio de propiedades de agua y alta reactividad. CN104Z ofrece el menor color de acrilatos epoxi Sartomer. Muestra buena resistencia química. | |
| Chicure® AAA | Double Bond Chemical Ind., Co., Ltd. | Chicure® AAA is a white crystalline powder that is soluble in benzene, toluene, and xylene. It is used as a hardening accelerator for epoxy, phenol, silicone, and acrylic resins. | |
| Ancamide® 2050 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 2050 Curing Agent is a special polyamide adduct designed for use with liquid epoxy resins in two-part, ambient-cure coatings. This product is a clear, amber liquid. | Request Sample |
| Trixene BI 7770 | Baxenden Chemicals Ltd. | Trixene BI 7770 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7772 | Baxenden Chemicals Ltd. | Trixene BI 7772 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7774 | Baxenden Chemicals Ltd. | Trixene BI 7774 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| Trixene BI 7779 | Baxenden Chemicals Ltd. | Trixene BI 7779 is a blocked isocyanate prepolymer cross-linker. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| KX-99 | Gellner Industrial, LLC | Ottopol KX-99 is a hydroxyl functional cationic acrylic solution polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. It is recommended that a maximum of 20% polyisocyanate and 20% epoxy silane is required to fo...Vea Mas Ottopol KX-99 is a hydroxyl functional cationic acrylic solution polymer. This polymer will crosslink at room temperature with polyisocyanates and epoxy silanes. It is recommended that a maximum of 20% polyisocyanate and 20% epoxy silane is required to formulate the fastest and most resistant coating. In less than an hour, the film will become water resistance. After two hours, the film will have over 100 double rubs acetone resistance. The dried film will also resist staining. Vea Menos | |
| LAROMER® EA 8765 R | BASF Dispersions & Resins | Laromer® EA 8765 R is an aliphatic epoxy-modified acrylate oligomer for the formulation of energy curable printing inks and coatings for wood, wood products, paper, and plastic applications. | |
| SiSiB® PC3100 | SiSiB SILICONES | SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving siz...Vea Mas SiSiB® PC3100 is a clear, light straw liquid. It is an epoxy functional silane. It can used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, in glass roving size-binders, as an adhesion-promoting additive in waterborne systems, to improve dry and wet strength in cured composites reinforced with glass fiber rovings, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. Vea Menos | |
| SILCOLEASE UV ADD 280 BLUE | Elkem Silicones | SILCOLEASE UV ADD 280 BLUE is an epoxy based silicone colorant. It is used with SILCOLEASE cationic UV radiation cured release coating systems to tint the cured release coating. | |
| SILCOLEASE UV ADD 280 RED | Elkem Silicones | SILCOLEASE UV ADD 280 RED is an epoxy silicone color concentrate. It is used with SILCOLEASE cationic UV radiation cured release coating systems to tint the cured release coating. | |
| DAPRO® DF 6800 | Elementis | DAPRO® DF 6800 is a mineral oil -free solventborne let down defoamer for architectural and industrial coatings, espcially in thick film epoxy floor coatings and other high-build systems. | Request Sample |
| Deflame® 4216 | Double Bond Chemical Ind., Co., Ltd. | Deflame® 4216 is a reactive with olefins, ketones, epoxides, etc. It is designed as a flame retardant for textiles and epoxy resins applied in electronic articles like PCB. Owing to the rigid structure i.e. pendant phosphorus group, this product results i...Vea Mas Deflame® 4216 is a reactive with olefins, ketones, epoxides, etc. It is designed as a flame retardant for textiles and epoxy resins applied in electronic articles like PCB. Owing to the rigid structure i.e. pendant phosphorus group, this product results in a matrix with high glass transition and thermostability. It is also less toxic and exhibits low smoke. Deflame® 4216 is suitable for using in textile and epoxy resin applied in electronic articles. It has a white flake appearance. Vea Menos | |
| SiSiB® PC3200 | SiSiB SILICONES | SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy...Vea Mas SiSiB® PC3200 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. Vea Menos | |
| SiSiB® PC3300 | SiSiB SILICONES | SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy...Vea Mas SiSiB® PC3300 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. Vea Menos | |
| SiSiB® PC3400 | SiSiB SILICONES | SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy...Vea Mas SiSiB® PC3400 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. Vea Menos | |
| SiSiB® PC3500 | SiSiB SILICONES | SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy...Vea Mas SiSiB® PC3500 is a clear colorless, low-odor liquid. It may be used as an adhesion promoter (coupling agent) for organic/inorganic interfaces, as a surface modifier (e.g. regulating surface polarity), as a crosslinking agent (moisture-curing of polymers), to improve dry and wet strength in cured composites reinforced with glass fiber rovings, to enhance wet electrical properties of epoxy-based encapsulate and packing materials, or to improve adhesion in waterborne acrylic sealants and in urethane and epoxy coatings. Vea Menos | |
| Epokukdo YDF-2001 | Kukdo Chemical Co., Ltd. | Epokukdo YDF-2001 is a 100% Bisphenol-F type taffy process solid resin. YDF-2001 is recommended for high solid system, low VOC coating wet paint and powder coating. Especially, YDF-2001 is also used for good flowing co-resin in combination with normal type 2-4 epoxy resin of hybrid system or straight epoxy...Vea Mas Epokukdo YDF-2001 is a 100% Bisphenol-F type taffy process solid resin. YDF-2001 is recommended for high solid system, low VOC coating wet paint and powder coating. Especially, YDF-2001 is also used for good flowing co-resin in combination with normal type 2-4 epoxy resin of hybrid system or straight epoxy system. Also, low molecular weight of YDF-2001 could have high crosslinking density of its cured properties with excellent film surface, mechanical strengths, adhesion, hardness, and chemical resistance. Vea Menos | |
| ANCAMIDE 221-X70® Curing Agent | Evonik Operations GmbH, BL Crosslinkers | ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xyle...Vea Mas ANCAMIDE 221-X70® Curing Agent is a member of a new series of reactive polyamides developed for use in the curing of epoxy resins in solvent-based surface coatings applications. Ancamide 221-X70 curing agent is TETA free and supplied at 70% solids in xylene. Special features include good color, color stability, chemical resistance and excellent corrosion resistance properties. It is freely compatible with a wide range of solvents, including those generally used in epoxy resin based coatings. Vea Menos | Request Sample |
| Novares® LA 100 | Rain Carbon Germany GmbH | Novares® LA 100 is a liquid low viscous modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing a...Vea Mas Novares® LA 100 is a liquid low viscous modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications industrial paints and floor coatings based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. Vea Menos | |
| Epokukdo YD-172 | Kukdo Chemical Co., Ltd. | Epokukdo YD-172 are dimer acid modified epoxy resins which have good flexibility and adhesion strength. Epokukdo YD-172 is well suited for a wide range of products including paints and coatings. | |
| Epoxies® 40-3905 | Epoxies, Etc. | Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epo...Vea Mas Epoxies® 40-3905 is an electrically epoxy adhesive and coating system designed for applications requiring low temperature cures. It will cure at room temperature in 18-24 hours and can be accelerated with mild heat. Epoxies® 40-3905 is a solvent free epoxy filled with pure silver for improved electrical conduction and heat transfer. It has outstanding adhesion to plastics, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic, and printed circuit boards. 40-3905 can also be thinned with up to 10% Toluol for many coating applications. Vea Menos | |
| Epoxies® 50-3170 | Epoxies, Etc. | Epoxies® 50-3170 is a high performance, thermally conductive epoxy rubber formulation designed for those applications requiring excellent electrical insulation and low stress during cure. The resin has a rubber consistency and retains its properties and f...Vea Mas Epoxies® 50-3170 is a high performance, thermally conductive epoxy rubber formulation designed for those applications requiring excellent electrical insulation and low stress during cure. The resin has a rubber consistency and retains its properties and flexibility on long term aging. This allows pottings and castings to be probed for detection of electrical failure. 50-3170 can be used for bonding sensitive components or for potting of power supplies, coils, glass diodes, and other delicate assemblies. This new formulation can be used successfully for transformers, regulators, PCB's, etc... Vea Menos | |
| IDROBEN 2643 | Benasedo | IDROBEN 2643 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It can also be combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| Poly[(2-oxi ranyl )-1,2-cyclohexanediol]-2-ethyl-2-( hydroxymethyl)-1,3-propanediol ether TTA3150 | PhibroChem | Poly[(2-oxi ranyl )-1,2-cyclohexanediol]-2-ethyl-2-( hydroxymethyl)-1,3-propanediol ether TTA3150 is a transparent solid that has cyclohexane structure and terminal epoxy groups. It performs excellent weatherability and transparency, high Tg temperature a...Vea Mas Poly[(2-oxi ranyl )-1,2-cyclohexanediol]-2-ethyl-2-( hydroxymethyl)-1,3-propanediol ether TTA3150 is a transparent solid that has cyclohexane structure and terminal epoxy groups. It performs excellent weatherability and transparency, high Tg temperature and good electronic properties. TTA3150 has low viscosity, good heat resistance, weatherability and electrical insulation functionalities. Its main applications include epoxy active diluent, electrical parts package, coating, fiber reinforced composite, LED encapsulant, photo adhesive and curing products, stabilizer and copper clad laminate. Vea Menos | Request Sample |
| Epoxies® 20-3060 | Epoxies, Etc. | Epoxies® 20-3060 is a low viscosity, general purpose, epoxy potting and encapsulating resin made from 100% solids and dose not contain any solvents. It has exceptional resistance to impact, vibration, and thermal shock. In addition, this versatile resin s...Vea Mas Epoxies® 20-3060 is a low viscosity, general purpose, epoxy potting and encapsulating resin made from 100% solids and dose not contain any solvents. It has exceptional resistance to impact, vibration, and thermal shock. In addition, this versatile resin system is machinable and ideal for use with meter mix dispensing equipment. 20-3060 is recommended for applications requiring the optimum in over-all properties and where rigid or flexible wire leads protrude directly from the encapsulation. It also adheres extremely well to lead materials, such as vinyl, neoprene, natural rubber, etc. Vea Menos | |
| Anquamine® 287 Waterborne Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Anquamine® 287 es un nuevo agente de curado epoxi a base de agua diseñado para utilizar en sistemas epoxi de dos componentes con resinas epoxi líquidas estándar y líquidas modificadas sin el agregado de emulsionantes. El líquido es ámbar a verdoso. El imp...Vea Mas Anquamine® 287 es un nuevo agente de curado epoxi a base de agua diseñado para utilizar en sistemas epoxi de dos componentes con resinas epoxi líquidas estándar y líquidas modificadas sin el agregado de emulsionantes. El líquido es ámbar a verdoso. El imprimador base Anquamine® 287 exhibe una excelente adhesión en el concreto fresco y propiedades de penetración que superan a otras tecnologías de agentes de curado a base de agua. También puede formularse en piso epoxi cementicio con excelente permeabilidad de humedad y resistencia al choque térmico. Las aplicaciones pueden incluir pisos epoxi cementicios, imprimador o sellador de concreto fresco, compuesto para el curado de concreto e imprimador para concreto nuevo o viejo. Vea Menos | Request Sample |
| Epokukdo YDB-400TE70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400TE70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T60 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T60 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly applied to paper phenolic laminates as an additional flame retardant. | |
| Epotec® YD 901 | Aditya Birla | Epotec® YD 901 is a low molecular weight solid epoxy resin, which has been converted into a 75% solids solution in xylene. This product is ideal for use in solvent-based protective coatings. | |
| 2-(2-Aminoethoxy) ethanol | BASF Corporation, Chemical Intermediates | Componente básico para la modificación de las resinas de epoxi. 2 (2-Aminoetoxi) son resinas de epoxi modificadas por etanol, son adecuadas para revestimientos de revestimiento de electrodeposición catiónica. | |
| 2-(2-Aminoethoxy) ethanol | Univar Solutions | Componente básico para la modificación de las resinas de epoxi. 2 (2-Aminoetoxi) son resinas de epoxi modificadas por etanol, son adecuadas para revestimientos de revestimiento de electrodeposición catiónica. | Request Sample |
| PAT-ADD U 7510 | Patcham USA | PAT-ADD U 7510 is a wetting and dispersing additive to prevent flooding and floatation of epoxy and vinyl ester/unsaturated polyester based composited. Prevents settling of pigments and fillers. | Request Sample |
| D.E.H.™ 582 | Univar Solutions | D.E.H.™ 582 is a cycloaliphatic amine hardener used as a curing agent for epoxy resins resulting in a non-blushing product with good water spot resistance and excellent chemical resistance. | Request Sample |
| D.E.H.™ 598B | Univar Solutions | D.E.H.™ 598B is a modified aliphatic amine hardener used as a curing agent for epoxy resins for rapid-set and low temperatures cure systems with high gloss and high strength. | Request Sample |
| Epokukdo YD-172X75 | Kukdo Chemical Co., Ltd. | Epokukdo YD-172X75 is a dimer, acid modified, epoxy resins which has good flexibility and adhesion strength. Epokukdo YD-172X75 is well suited for a wide range of products including paints and coatings. | |
| Sunmide® 153-60S Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Sunmide® 153-60S Curing Agent is a solution of high molecular weight polyamide resin. It is ideal for use in industrial maintenance coatings, industrial flooring, and general purpose epoxy coatings. | Request Sample |
| EPOLEAD PB4700 | Daicel (U.S.A.), Inc. | EPOLEAD PB4700 is epoxidized polybutadiene which has both epoxy groups and vinyl groups in the molecules. Flexible and tough coatings are available by combining with the suitable polyamines and acid anhydrides. | |
| IDROBEN E 530 | Benasedo | IDROBEN E 530 is a self crosslinking, Water-dilutable Epoxy Resin Acrylic modified. It could be also combined with esametoxymelamine resins in the ratio 85/15 or 70/30 based on solid contents. | |
| Chicure® 2300 | Double Bond Chemical Ind., Co., Ltd. | Chicure® 2300 has various applications, It could be used as non-yellowing chain extender in PU application, curing agent in one pack epoxy resin, formaldehyde quenching agent, anti-NOx agent. | |
| 700 | GIMEL Technical Materials | 700 is a difunctional standard bisphenol A epoxy acrylate used in inks, wood coatings, printing varnishes, adhesives, and vacuum metallization primers. It has a fast curing response and good abrasion resistance. | |
| Epitex 611S | US Polymers - Accurez LLC | Epitex 611S is an epoxy ester emulsion used for modifying polyvinyl acetate emulsions and thermosplastic latex resins. It imparts epoxy characteristics to the latex coating and provides improved adhesion to concrete. Due to its excellent adhesive qualitie...Vea Mas Epitex 611S is an epoxy ester emulsion used for modifying polyvinyl acetate emulsions and thermosplastic latex resins. It imparts epoxy characteristics to the latex coating and provides improved adhesion to concrete. Due to its excellent adhesive qualities, 611S allows a variety of topcoats to be applied to the substrate, such as: polyesters, urethanes, and varnish. Incorporating 611S into the base coat over old chalky paint films on masonry substrates assists in tying down the loose chalk and improves intercoat adhesion of the conventional emulsion topcoats. Vea Menos | Request Sample |
| Epokukdo YDB-400H | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400H is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400T70 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400T70 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. It is mainly being applied to paper phenolic laminates as an additional flame retardant. | |
| Epokukdo YDB-400 | Kukdo Chemical Co., Ltd. | Epokukdo YDB-400 is a high bromine content epoxy resin, conventionally being used for normal chemical reaction with hardeners. Currently, it is being applied for paper phenolic laminates as an additional flame retardant. | |
| Amirez 142 | Incorez Ltd. | Este es un agente endurecedor transmitido por agua, emulsionado reactivo para las resinas de epoxi líquidas. El producto experimentará una reacción química con la resina de epoxi líquida para rendir una capa resistente, durable, de alto lustre convenient...Vea Mas Este es un agente endurecedor transmitido por agua, emulsionado reactivo para las resinas de epoxi líquidas. El producto experimentará una reacción química con la resina de epoxi líquida para rendir una capa resistente, durable, de alto lustre conveniente para aplicaciones para pisos y para paredes. Vea Menos | |
| PHENODUR® VPW 1942/52WA | Allnex | PHENODUR® VPW 1942/52WA is a formulated phenolic/epoxide system, intended as sole-binder for the interior and exterior coating of metallic packaging materials and for corrosion resistant industrial stoving systems. | Request Sample |
| BYK-SILCLEAN 3701 | BYK | BYK-SILCLEAN 3701 is a silicone-containing surface additive for epoxy resin systems to improve cleanability (easy-to-clean effect). Permanent effect as a result of cross-linking in the system. | Request Sample |
| Epotec® RD 114LE | Aditya Birla | Epotec® RD 114LE is a diglycidyl ether of neopentyl glycol, designed primarily as a reactive diluent for high viscosity epoxy resins. This product is ideal for use in coatings and adhesives. | |
| RHEOBYK-R 606 | BYK | RHEOBYK-R 606 is a liquid rheology additive for solvent-borne and solvent-free adhesives and sealants based on polyurethane, epoxy, and acrylate resins that contain pyrogenic silica or organophilic phyllosilicates. | Request Sample |
| Polarite 905A | Imerys Performance Additives | Polarite 905A is a surface treated hydrous kaolin for PBT, PEEK, Acrylics, Epoxy and Urethane based applications. Can also be used in coatings applications for improved barrier and anti-corrosive properties. | |
| Novares® LA 1000 | Rain Carbon Germany GmbH | Novares® LA 1000 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing ...Vea Mas Novares® LA 1000 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. Vea Menos | |
| Novares® LA 1900 | Rain Carbon Germany GmbH | Novares® LA 1900 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing ...Vea Mas Novares® LA 1900 is a high viscous liquid modifier with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. Vea Menos | |
| Disvester-850 | D.S.V. Chemicals Pvt. Ltd. | Disvester-850 is an esterified epoxy resin. This product derives from mixed-length oils. It can be used in automotive primers, chemically resistant coatings, air-drying and stoving paints, and metallic decoration varnishes. | |
| ND-22 | Beijing Entrepreneur Science &Trading Co., Ltd. | ND-22 is used as cross-linking agent for RTV Silicone Rubber and reinforcing for epoxy fiber glass reinforced plastics, viscosity increaser for synthetic resin and raw stuff fabric racked agent. | |
| Epokukdo KBPN-110 | Kukdo Chemical Co., Ltd. | Epokukdo KBPN-110 (BPA - Novolac Epoxy) has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional epoxy resin. KBP...Vea Mas Epokukdo KBPN-110 (BPA - Novolac Epoxy) has advantageous characteristics of excellent heat, and chemical resistance, due to its multi-functional groups in a molecule. It also provides higher cross-linked property than general difunctional epoxy resin. KBPN-110 is a small molecular type of KBPN series and is used for the product which requires the characteristics of heat resistance, chemical resistance and low temp erature curability, high Tg for powder coating or laminates. It also has high reactivity so that it is curable at ambient temperature. Vea Menos | |
| DYHARD® D50EP | AlzChem AG | DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers...Vea Mas DYHARD® D50EP is a master batch of 50% DYHARD® 100S in standard bisphenol A epoxy resin (EEW 182-192). Advantages include a dust-free production environment, as well as easier dosage and incorporation. It is cost-effective due to easy handling, and offers the same reactivity, latency, and mechanical properties as the DYHARD® 100 series. This product is recommended for one-component thermosetting epoxy resin formulations for the automotive, sporting goods, and aerospace industry, for adhesives, for encapsulation compounds, and more. Vea Menos | |
| Glycidyl Methacrylate (GMA) Regular Grade | Estron Chemical, Inc. | Glycidyl Methacrylate (GMA) Regular Grade provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy c...Vea Mas Glycidyl Methacrylate (GMA) Regular Grade provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy chemistries can provide improved synergistic physical functions and properties. It has a minimum purity of 97.5%. Glycidyl Methacrylate (GMA) Regular Grade can be used in printing inks, resins in the electronics industry, acrylic enamels for auto top-coats and appliances, and thermosetting acrylics for can coatings. Vea Menos | |
| Glycidyl Methacrylate (GMA) High Purity | Estron Chemical, Inc. | Glycidyl Methacrylate (GMA) High Purity provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy che...Vea Mas Glycidyl Methacrylate (GMA) High Purity provides dual reactive functionality (epoxy and methacrylate) to afford a wide diversity of polymer structures accessible via either ionic or free radical polymerization. The attributes of both acrylic and epoxy chemistries can provide improved synergistic physical functions and properties. It has a minimum purity of 98.5%. Glycidyl Methacrylate (GMA) High Purity can be used in printing inks, resins in the electronics industry, acrylic enamels for auto top-coats and appliances, and thermosetting acrylics for can coatings. Vea Menos | |
| Epotec® YDPN 661 | Aditya Birla | Epotec® YDPN 661 is a multifunctional epoxy phenol novolac resin. This product is well suited for use in chemical resistant coatings & linings, chemical resistant floor topcoats, adhesives, coil coatings, and marine & protective coatings. | |
| Novares® LA 300 | Rain Carbon Germany GmbH | Novares® LA 300 is a liquid low viscous modifier (300 - 400 mPas @ 25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a pla...Vea Mas Novares® LA 300 is a liquid low viscous modifier (300 - 400 mPas @ 25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications industrial paints and floor coatings based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. Vea Menos | |
| Versamid® 125 | Gabriel Performance Products | Versamid® 125 is a medium viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications...Vea Mas Versamid® 125 is a medium viscosity, reactive polyamide resin designed for use with solid or liquid epoxy resins for tough, chemical-resistant thermoset coating applications that cure at room temperature. This resin is also useful in adhesive applications. Versamid® 125 and epoxy resin systems are generally harder than and cure more rapidly than Versamid® 140 systems. It is often blended with Versamid® G 250 US, a fatty amido amine resin, to provide a range of viscosities, cure speeds and resistance properties. Vea Menos | |
| Amicure® UR7/10 | Evonik Operations GmbH, BL Crosslinkers | Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid ...Vea Mas Amicure® UR7/10 cure accelerator, a finely ground version of Amicure UR accelerator; is a substituted urea-based accelerator (1 Phenyl 3,3 dimethyl urea) for dicyandiamidecured epoxy resins. It combines excellent latency at ambient temperature with rapid cure in systems heated above its activation temperature. Amicure® UR7/10 is supplied as a micropulverized crystalline solid which is easily dispersed into liquid epoxy resin. Applications for this product include one-component paste and film adhesives, heat-cure composites, and prepreg composites. Vea Menos | Request Sample |
| Diethanolamine, pure | BASF Corporation, Chemical Intermediates | Agente de neutralización para revestimientos a base de agua, componente básico para la modificación de las resinas de epoxi y los poliuretanos. Las resinas de epoxi modificadas por la dietalonamina se utilizan para los revestimientos catiónicos de dep...Vea Mas Agente de neutralización para revestimientos a base de agua, componente básico para la modificación de las resinas de epoxi y los poliuretanos. Las resinas de epoxi modificadas por la dietalonamina se utilizan para los revestimientos catiónicos de deposición eléctrica. Vea Menos | |
| Epotec® YD 905 | Aditya Birla | Epotec® YD 905 is a medium molecular weight solid epoxy resin designed for use in various coating applications. This product is ideal for use in powder coatings, coil coatings, collapsible tube coatings, and drum linings. | |
| BYK®-3932 P | BYK | Aditivo especial de nivelación con propiedades protectoras de superficie, para revestimientos en polvo. | Request Sample |
| Ancamine® 2749 | Evonik Operations GmbH, BL Crosslinkers | Ancamine® 2749 is a cycloaliphatic amine adduct curing agent designed for use with liquid epoxy resins. It is supplied as an amber liquid and has a viscosity of 275cPs at 25 °C. | Request Sample |
| Trixene BI 7771 | Baxenden Chemicals Ltd. | Trixene BI 7771 is a blocked isocyanate prepolymer cross-linker with a viscosity. Its main application is to improve the elongation, impact resistance, and flexibility of epoxy coatings without compromising chemical resistance. | |
| 728 | GIMEL Technical Materials | 728 is a difunctional modified epoxy acrylate used in UV inks and circuit board inks. It shows good flexibility and bending resistance with excellent leveling, high gloss, and a good film build. | |
| CN153 | Sartomer Americas | CN153 es un oligómero de acrilato epoxi que contiene acrilato y la funcionalidad epoxi en la misma cadena principal. El anillo epoxi reacciona fácilmente con aminas o ácidos. CN153 se utiliza principalmente en sistemas que requieren curado dual para logra...Vea Mas CN153 es un oligómero de acrilato epoxi que contiene acrilato y la funcionalidad epoxi en la misma cadena principal. El anillo epoxi reacciona fácilmente con aminas o ácidos. CN153 se utiliza principalmente en sistemas que requieren curado dual para lograr un curado completo o menor contracción. Las aplicaciones sugeridas incluyen adhesivos, laminación y adhesivos sensibles a la presión, revestimientos de metal, plástico y madera, componentes electrónicos y tintas serigráficas. Vea Menos | |
| CRAYVALLAC® WN-1150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1150 is used to control gloss between 30 – 60% for epoxy/polyester hybrid, HAA and TGIC based polyester powder coatings. It shows no effect on weather ability or physical properties. | Request Sample |
| N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine | BASF Corporation, Chemical Intermediates | Este es un reticulante para las resinas de epoxi. N, N'-Bis-(3-aminopropil)-diamina de etileno se utiliza para revestimientos de epoxi de dos componentes, adhesivos a base de epoxi y piezas de plástico. Debido a su alta funcionalidad y peso equivalente...Vea Mas Este es un reticulante para las resinas de epoxi. N, N'-Bis-(3-aminopropil)-diamina de etileno se utiliza para revestimientos de epoxi de dos componentes, adhesivos a base de epoxi y piezas de plástico. Debido a su alta funcionalidad y peso equivalente bajo, N, N'-Bis (3-aminopropil)- diamina de etileno permite reticulación de alta densidad. Vea Menos | |
| N,N'-Bis-(3-aminopropyl)-ethylenediamine, N4-Amine | Univar Solutions | Este es un reticulante para las resinas de epoxi. N, N'-Bis-(3-aminopropil)-diamina de etileno se utiliza para revestimientos de epoxi de dos componentes, adhesivos a base de epoxi y piezas de plástico. Debido a su alta funcionalidad y peso equivalente...Vea Mas Este es un reticulante para las resinas de epoxi. N, N'-Bis-(3-aminopropil)-diamina de etileno se utiliza para revestimientos de epoxi de dos componentes, adhesivos a base de epoxi y piezas de plástico. Debido a su alta funcionalidad y peso equivalente bajo, N, N'-Bis (3-aminopropil)- diamina de etileno permite reticulación de alta densidad. Vea Menos | Request Sample |
| SEA-450M40 | DKSH | SEA-450M40 is a difunctional BPA type epoxy acrylate. This product is characterized by its excellent mechanical strength, adhesive strength and chemical resistance. SEA-450M40 provides fast cure response when exposed to ultraviolet light (UV). | Request Sample |
| BECKOPOX™ EH 623w/80WA | Allnex | Beckopox® EH 623W/80WA es un solvente a base de agua y agente de curado de epoxi poliamida sin ácido acético. Es un endurecedor para revestimientos reducibles con agua en sustratos minerales y metálicos, morteros epoxi hidráulicos (ECC). | Request Sample |
| Epotec® YD 134 S | Aditya Birla | Epotec® YD 134 S is a high molecular weight, bisphenol-A-based semi-solid epoxy resin. This product is ideal for use in high solids protective coatings, tank linings, adhesives, and coal tar-based coatings. | |
| Baxxodur™ EC 252 | BASF Corporation, Chemical Intermediates | BAXXODUR™EC 252 es un agente endurecedor a base de amina cicloalifática de viscosidad muy baja y reactividad moderada. Aplicaciones: adhesivo estructural, revestimiento de epoxi del alta resistencia, laminación, fundición y encapsulación de compuestos, e...Vea Mas BAXXODUR™EC 252 es un agente endurecedor a base de amina cicloalifática de viscosidad muy baja y reactividad moderada. Aplicaciones: adhesivo estructural, revestimiento de epoxi del alta resistencia, laminación, fundición y encapsulación de compuestos, epoxi preimpregnado. Vea Menos | |
| D.E.N.™ 439 EK85 | Univar Solutions | D.E.N.™ 439 EK85 is a highly functional (±3.8) epoxy novolac resin in methyl-ethyl ketone solution. Offers improved reactivity, high viscosity, good drape and limited tack. D.E.N.™ 439-EK85 is mainly for laminating or prepreg applications. | Request Sample |
| 7798 | GIMEL Technical Materials | 7798 is a modified bisphenol A epoxy acrylate used in cost-effective nail gels and wood coatings. It has good flexibility and bending resistance with a fast curing response and good surface dryness. | |
| Epotec® TH 982 | Aditya Birla | Epotec® TH 982 is a solid phenolic hardener based on epoxy resin and bisphenol-A, with an added curing accelerator. This product is ideal for use in both decorative and functional powder coatings. | |
| Epotec® YDPN 631 | Aditya Birla | Epotec® YDPN 631 is a multifunctional, high viscosity epoxy phenol novolac resin delivering good chemical resistance and performance at elevated temperatures. This product is ideal for use in marine & protective coatings, adhesives, and coil coatings. | |
| Ancamide® 220 Curing Agent | Evonik Operations GmbH, BL Crosslinkers | Ancamide® 220 Curing Agent is one in a series of standard reactive polyamides for use in the curing of epoxy resins. It has been designed particularly for use in solvent-based surface coatings. | Request Sample |
| Epokukdo YD-128S | Kukdo Chemical Co., Ltd. | Epokukdo YD-128S is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic...Vea Mas Epokukdo YD-128S is a liquid type standard epoxy resin derived from Bisphenol-A. Especially, it has excellent adhesion, chemical resistance, heat resistance, etc. is cured together with the various hardeners(polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128S, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. Vea Menos | |
| Epokukdo YD-128 | Kukdo Chemical Co., Ltd. | Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A. It has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128 is cured together with the various hardeners (polyamide resin, aromatic polyamine, alipha...Vea Mas Epokukdo YD-128 is a liquid type standard epoxy resin derived from Bisphenol-A. It has excellent adhesion, chemical resistance, heat resistance, etc. Epokukdo YD-128 is cured together with the various hardeners (polyamide resin, aromatic polyamine, aliphatic polyamine and anhydride compound). Depending on diluents and other additives, different physical properties after curing can be obtained. Generally, YD-128, clear liquid form of the standard epoxy resins is widely used in many fields such as paints, electrode paint, ambient curing paint, clear coating agent, anti-corrosion coatings, casting, dipping, encapsulation, laminates, condenser, resistor coating etc.. Vea Menos | |
| Epotec® YD 901EK-80 | Aditya Birla | Epotec® YD 901EK-80 is an unmodified, standard, medium molecular weight and low softening point epoxy resin in MEK. This product is ideal for use in marine coatings, industrial anti-corrosive & maintenance coatings, and adhesives. | |
| SILCOLEASE UV POLY 246 | Elkem Silicones | SILCOLEASE UV POLY 246 UV cure silicone system is a 100% reactive “ready to use” release coating chemistry based on epoxy-silicone copolymer technology. It is specially designed to produce easy release performance. | |
| SILCOLEASE UV POLY 246 U1 | Elkem Silicones | SILCOLEASE UV POLY 246 UV cure silicone system is a 100% reactive “ready to use” release coating chemistry based on epoxy-silicone copolymer technology. It is specially designed to produce easy release performance. | |
| Luna-clear 202 OP | DKSH | Luna-clear 202 OP is an organic phosphorous compound, which is used as an anti-yellowing agent in acrylic and epoxy/polyester powder coatings. Luna-clear 202 OP anti-yellowing properties are effective in all organic powder coatings that contain epoxy of g...Vea Mas Luna-clear 202 OP is an organic phosphorous compound, which is used as an anti-yellowing agent in acrylic and epoxy/polyester powder coatings. Luna-clear 202 OP anti-yellowing properties are effective in all organic powder coatings that contain epoxy of glycidylmethacrylate groups. It prevents yellowing in directly heated ovens and yellowing, which occures on parellel coating lines with different chemistries. Luna-clear 202 OP is halogen-free and contains no heavy metals. This product is available in Europe, Asia and North America. Vea Menos | Request Sample |
| Epotec® YD 127 FP | Aditya Birla | Epotec® YD 127 FP is an unmodified, low viscosity liquid epoxy resin reaction product of bisphenol-A and epichlorohydrin. This product is ideal for use in high solids solvent-free coatings, laminates, and electrical & electronics applications. | |
| Vycel U | Atmos Technologies | Vycel U is a low-viscosity diluent of PU systems with excellent particle wetting. Excellent compatibility with Polyurethanes, Epoxy, Polyester, and Phenolic resin systems. Applications include Coatings, Adhesives, Sealants, Electrical potting, PU Foam. | |
| BYK®-1760 | BYK | BYK®-1760 is an emission-free silicone and polymer-containing defoamer and air release agent for solvent-borne and solvent-free coatings, adhesives, sealants and casting resins. Particularly recommended for epoxy resin systems. | Request Sample |
| Pripol™ 1025 | Cargill Industrial Specialties | Pripol™ 1025 is a hydrogenated Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resist...Vea Mas Pripol™ 1025 is a hydrogenated Dimer acid building block for epoxy, polyurethane, polyester and polyamide coatings and adhesives. It provides good colour, water repellency, flexibility, thermo-oxidative stability and excellent hydrolysis / chemical resistance. Vea Menos | |
| Lonzacure™ DETDA 80 | Arxada | Lonzacure™ DETDA 80 is a low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking hardener for epoxy resin systems providing high temperature resistance even for bisphenol-A epoxy...Vea Mas Lonzacure™ DETDA 80 is a low viscosity liquid aromatic diamine. It is one of the key components for polyurea processing. A typical application of this product is spray coating for protective coatings in civil engineering applications. Lonzacure™ DETDA 80 also functions as chain extender in polyurethanes and can be applied in resin injection moulding. It is a crosslinking hardener for epoxy resin systems providing high temperature resistance even for bisphenol-A epoxy resin systems. It can be applied in any liquid manufacturing process, e.g for composites. Vea Menos | |
| Novares® LA 700 | Rain Carbon Germany GmbH | Novares® LA 700 is a liquid midum viscous modifier (700 - 800 mPas @25°C) with phenolic OH functionality. It is recommended for high solid and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasti...Vea Mas Novares® LA 700 is a liquid midum viscous modifier (700 - 800 mPas @25°C) with phenolic OH functionality. It is recommended for high solid and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. Vea Menos | |
| Novares® LA 1200 | Rain Carbon Germany GmbH | Novares® LA 1200 is a high viscous liquid modifier (1200 - 1500 mPas @25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a ...Vea Mas Novares® LA 1200 is a high viscous liquid modifier (1200 - 1500 mPas @25°C) with phenolic OH functionality. It is recommended for solvent-borne and solvent-free formulations based on epoxy, polyurethane, thermoplastic polyacrylics and polyaspartics as a plasticizer, hydrophobing agent, resistance enhancer, and viscosity modifier. Best known applications are industrial and marine anti-corrosive paints based on epoxy and polyurethane. Depending on national standards NOVARES and RUETASOLV products are classified as non-VOC or very low VOC products. Detailed information is available upon request. Vea Menos | |
| Epoxies® 40-3909 | Epoxies, Etc. | Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternat...Vea Mas Epoxies® 40-3909 is a two part epoxy resin adhesive and coating compound, filled with a highly conductive, silver coated nickel. It is designed to provide low volume resistivity of less than 5x10-3 ohm-cm. Silver coated nickel offers a lower cost alternative to many silver filled epoxy systems. 40-3909 has a convenient 1:1 mix ratio by weight and can cure at room temperature overnight but can also be accelerated with mild heat. It is well suited for use in the assembly or repairs of printed circuit boards, connectors, wave guides, high frequency shields, and as a cold solder. Vea Menos | |
| D.E.R.™ 667-E | Univar Solutions | D.E.R.™ 667-E is a high molecular weight “7-type” solid epoxy resin with improved solution stability. Suitable for metal decoration, interior and exterior can coatings, tube and drum linings, coil primers and many other industrial applications. | Request Sample |
| Amirez 148/055 | Incorez Ltd. | Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure devel...Vea Mas Amirez 148/055 is a water soluble polyamine curing agent designed to produce very tough and durable high gloss waterbased surface coatings with both liquid and solid epoxy resins. In particular, this curing agent provides excellent hardness and cure development. Vea Menos | |
| LAROMER® EA 9101 | BASF Dispersions & Resins | Laromer® EA 9101 is an epoxy acrylate oligomer for the formulation of energy curable inks and coatings, commonly used as a pigment wetting agent in offset applications. It exhibits moderate cure speed due to its average double bond density, but is a good ...Vea Mas Laromer® EA 9101 is an epoxy acrylate oligomer for the formulation of energy curable inks and coatings, commonly used as a pigment wetting agent in offset applications. It exhibits moderate cure speed due to its average double bond density, but is a good crosslinker due to its high functionality. The medium double bond density makes it a prime choice as flexibiliser for hard, rigid films as for example for those based on bisphenol A epoxy diacrylate. The high flexibility supports substrate wetting with good flow and levelling and improves adhesion on polar metal surfaces. Laromer® EA 9101 is compatible with all mono- and multifunctional monomers as well as with all common polyester acrylates, epoxy acrylates and urethane acrylates. Laromer® EA 9101 is an important formulation component for UV/EB low migration inks and overprint varnishes due to its high molecular weight. Vea Menos | |
| D.E.N.™ 438 | Univar Solutions | D.E.N.™ 438 by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438 is recognized as a standard for high-temperatur...Vea Mas D.E.N.™ 438 by Olin is a highly functional (±3.6) epoxy novolac resin. Offers good mechanical resistance, good temperature resistance, good chemical resistance performance and workable viscosity. D.E.N.™ 438 is recognized as a standard for high-temperature applications. Vea Menos | Request Sample |
| Razeen® LR 1166 | Jubail Chemical Industries Co. | Razeen® LR 1166 is a general purpose, low viscosity epoxy resin based on Bisphenol A. This product is characterized by its extremely low chlorine content. Razeen® LR 1166 is used in the formulation of automotive body coatings. |
