| #249 HI-TECH | PCI Group, Inc. | #249 HI-TECH is a clear blend of Alkyl-Aryl modified silicones. It is designed for high solids coating systems to improve mar resistance without the standard recoat problems. Designed for use in virtually all high solids solvent-borne systems. | |
| ADDITOL® XL 122 | Allnex | Aditivo de pintura para aumentar la resistencia al rayado y al deslizamiento, y para mejorar el flujo y la nivelación en pinturas de secado del aire y al horno. | Request Sample |
| ADDITOL® XW 329 | Allnex | Aditivo de pintura para aumentar la resistencia al rayado, el deslizamiento y la nivelación, particularmente en las pinturas diluibles en agua. | Request Sample |
| AEROSIL® R 9200 | Evonik Operations GmbH, BL Coating Additives | AEROSIL® R 9200 is a structure modified, hydrophobic fumed silica. | Request Sample |
| ALUMINASOL™ AS-200 | Nissan Chemical America Corporation | El ALUMINASOL™ AS-200 es una alúmina acuosa coloidal que se puede usar en muchas aplicaciones con catalizadores, fibra de vidrio, telas, fibras textiles y sintéticas. La viscosidad del AS-200 a 20 °C es mayor que la del AS-100. ALUMINASOL™ aporta propieda...Vea Mas El ALUMINASOL™ AS-200 es una alúmina acuosa coloidal que se puede usar en muchas aplicaciones con catalizadores, fibra de vidrio, telas, fibras textiles y sintéticas. La viscosidad del AS-200 a 20 °C es mayor que la del AS-100. ALUMINASOL™ aporta propiedades antiestáticas, resistencia al calor, resistencia a la adhesión, capacidad peliculígena y adhesión a los productos en los que se aplica. Vea Menos | Request Sample |
| Aluminum Oxide (Al2O3) | Panadyne | Aluminum Oxide (Al2O3) is an aluminum salt sometimes known as alumina or corundum. This product is a wear-resistant material that can provide chemical resistance to acid and alkali salts at extreme temperatures. It can be used in laminates, coating, and...Vea Mas Aluminum Oxide (Al2O3) is an aluminum salt sometimes known as alumina or corundum. This product is a wear-resistant material that can provide chemical resistance to acid and alkali salts at extreme temperatures. It can be used in laminates, coating, and polishing. Vea Menos | |
| AMA | PCI Group, Inc. | AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clea...Vea Mas AMA is a clear-colored dimethyl silicone which improves mar resistance and reduces surface tension in conventional solvent based coatings. Systems include: acrylic resins, alkyd, epoxy, lacquer, phenolic, polyester and urethane. It is recommended for clear topcoats. Vea Menos | |
| AMAFCA | PCI Group, Inc. | AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip,...Vea Mas AMAFCA is a clear-colored Alkyl-Aryl silicone designed control foaming during application. It also promotes improved mar resistance for virtually all solvent based coating systems. It can control foaming in roller coater, flow coater, curtain coater, dip, conventional and airless spray systems. Vea Menos | |
| AQUACER® 1547 | BYK | Cera de emulsión para mejorar las propiedades de superficie de los revestimientos de lata transmitidos por agua. Emulsión aniónica de una cera de polietileno oxidado de dispersion alta. | Request Sample |
| AQUACER® 513 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de las tintas de impresión acuosos. Emulsión no-iónica basada en una cera oxidada del polietileno de dispersión alta. | Request Sample |
| AQUACER® 552 | BYK | Ceras de emulsión para mejorar la protección superficial de los sistemas de la pintura y de la tintas de impresión, acuosos. Emulsión no iónica basada en una cera oxidada del polietileno de dispersión alta. | Request Sample |
| AquaFLON® 178G (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 178G is PTFE (polytetrafluoroethylene) and synthetic wax and in an aqueous dispersion. AquaFLON® 178G is recommended for water-based industrial coatings. | |
| AquaFLON® 50 (PTFE Aqueous Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 ...Vea Mas AquaFLON® 50 is submicron PTFE in an aqueous dispersion. AquaFLON® 50 is recommended for a wide variety of specialty applications in coatings such as water based overprint varnishes for can coatings. Due to its extremely small particle size, AquaFLON® 50 is most suitable for thin film applications. Vea Menos | |
| AquaFLON® 52 (PTFE Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 52 is PTFE (polytetrafluoroethylene) in a non-ionic aqueous dispersion. AquaFLON® 52 is recommended for water-based specialty coatings. | |
| AquaFLON® 605 (PTFE / Synthetic Wax Aqueous Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 605 is PTFE (polytetrafluoroethylene) and spherical synthetic wax in an aqueous dispersion. AquaFLON® 605 is recommended for a wide variety of specality applications in coatings. | |
| AquaFLON® 797 (PTFE and Synthetic Wax Aqueous Dispersion) | Shamrock Technologies, Inc. | AquaFLON® 797 is PTFE (polytetrafluoroethylene) and synthetic wax in a non-ionic aqueous dispersion. AquaFLON® 797 is recommended for a wide variety of water based industrial coatings, wood finishes, and composite treatments. | |
| AquaFLON® MG (PTFE / Carnauba Wax Aqueous Dispersion) | Shamrock Technologies, Inc. | AquaFLON® MG is PTFE (polytetrafluoroethylene) and carnauba wax in an aqueous dispersion. | |
| AquaKlean 418 | Micro Powders, Inc. | AquaKlean 418 is an anionic carnauba wax emulsion that provides water beading with slip, block and mar resistance. Also useful in seed coatings. | |
| AQUAMAT® 208 | BYK | Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de pintura y de tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta. | Request Sample |
| AQUAMAT® 263 | BYK | Dispersiones acuosas de cera para matizado, para mejorar las propiedades de superficie de los sistemas de la pintura y de las tintas de impresión, transmitidos por agua. Dispersión oxidada de cera de polietileno de dispersión alta. | Request Sample |
| AquaPolyfluo 411 | Micro Powders, Inc. | AquaPolyfluo 411 is a unique micronized oxidized polyethylene/PTFE wax composite for improved scuff and mar resistance in aqueous systems. | |
| AquaPolysilk 19 | Micro Powders, Inc. | AquaPolysilk 19 is a unique micronized polyethylene wax composite for lubricity with abrasion and heat resistance in aqueous systems. | |
| ASAFAMA | PCI Group, Inc. | ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and i...Vea Mas ASAFAMA is a clear-colored, highly-modified silicone fluid designed for use in systems where a dimethyl silicone may be a problem. It is useful for enhancing the defoaming properties of applied coatings, and sharpens gloss, improves color acceptance and improves mar resistance without recoating problems. Vea Menos | |
| Boltorn™ P501 | Perstorp | Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cu...Vea Mas Boltorn™ P501 1 is a liquid dendritic polyester/ether polyol blend of low viscosity with improved hardness and scratch resistance. This product is similar to the Boltorn™P500 but has been designed to further boost scratch resistance and hardness of UV cured coatings while maintaining all the other properties of Boltorn™ P501. Vea Menos | |
| Borchi® Gol LA 2 | Borchers, A Company of OMG | Borchi® Gol LA 2 es un agente tensoactivo sin VOC a base de un compuesto de silicona organomodificado. Mejora las características de flujo y nivelación de los sistemas de revestimientos solubles en agua, a base de disolventes y sin disolventes. Este produ...Vea Mas Borchi® Gol LA 2 es un agente tensoactivo sin VOC a base de un compuesto de silicona organomodificado. Mejora las características de flujo y nivelación de los sistemas de revestimientos solubles en agua, a base de disolventes y sin disolventes. Este producto genera una reducción media de la tensión superficial y puede utilizarse en barnices transparentes o en los sistemas de revestimientos pigmentados. Borchi® Gol LA 2 se caracteriza por la buena compatibilidad aglutinante y por ser particularmente apto para usar en pinturas finales curadas en forma química a base de hidroxilos que contienen poliacrilatos y poliésteres, principalmente, en los sistemas de poliéster-melamina o epoxi. Además, ayuda en la nivelación de los acabados curados físicamente a base de poliacrilatos y alquídicos de cadenas cortas, medianas y largas. Se recomienda el uso de este producto especialmente en aquellos sistemas en los que es necesario usar ciertos disolventes o aditivos sin disolventes. Para facilitar la capacidad de incorporación, puede ser útil disolver Borchi® Gol LA 2 en disolventes a base de glicol, éster, disolventes alifáticos o aromáticos. Vea Menos | |
| BRB Siloen® SMA 284 | BRB International BV | BRB Siloen® SMA 284 is an 80% active dispersion of a high molecular weight silicone gum. It can be used as a silicone additive for waterborne and solvent coatings providing excellent slip, mar resistance, gloss and anti-blocking effect. | |
| BYK®-306 | BYK | Aditivo de superficie de silicón con una reducción fuerte de tensión de superficie. Solución de un polidimetilsiloxano polieter-modificado. | Request Sample |
| BYK®-333 | BYK | Aditivo de superficie de silicón con una reducción fuerte de tensión de superficie. Polidimetilsiloxano poliéter-modificado. | Request Sample |
| Calcined Alumina DN-206 | Panadyne | Calcined Alumina DN-206 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coating...Vea Mas Calcined Alumina DN-206 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coatings and as a polishing compound for plastic, metal and glass. Vea Menos | |
| Calcined Alumina DN-420 | Panadyne | Calcined Alumina DN-420 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coating...Vea Mas Calcined Alumina DN-420 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coatings and as a polishing compound for plastic, metal and glass. Vea Menos | |
| Calcined Alumina DN-430 | Panadyne | Calcined Alumina DN-430 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coating...Vea Mas Calcined Alumina DN-430 is an aluminum oxide powder that has been calcined. This product has high hardness, compression strength, abrasion or wear resistance, electrical insulation properties, and a high melting point. It can be used in paints and coatings and as a polishing compound for plastic, metal and glass. Vea Menos | |
| CERACOL® 79 | BYK | Dispersión de cera para mejorar las propiedades de superficie de revestimientos de lata. Dispersión de cera de Carnauba. | Request Sample |
| CERAFAK® 140N | BYK | Dispersión de cera para mejorar las propiedades de superficie de revestimientos de lata. Dispersión de cera de Carnauba. | Request Sample |
| CERAFLOUR® 920 | BYK | Polímero orgánico micronizado para sistemas de pintura de estera transmitidos por agua y transmitidos por solvente. Polímero orgánico micronizado. | Request Sample |
| CERAFLOUR® 950 For Powder | BYK | Aditivo de estera para revestimientos en polvo. Cera de polietileno, de alta densidad, modificada, micronizada. | Request Sample |
| CERAFLOUR® 965 | BYK | Aditivo eficiente para lograr estructuras finas homogéneas. PTFE (Politetrafluoroetileno) micronizado. | Request Sample |
| CERAFLOUR® 994 | BYK | Cera micronizada para mejorar las propiedades de superficie de los sistemas de pintura transmitidos por solvente y de los revestimientos en polvo. Cera amida ultra-fina, micronizada. | Request Sample |
| CERAFLOUR® 999 | BYK | CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and ...Vea Mas CERAFLOUR® 999 is an extra-fine, micronized PTFE-modified polyethylene wax for organic cosolvent-containing aqueous, solvent-borne, solvent-free, and UV coating systems, powder coatings, and printing inks to improve surface properties such as scratch and abrasion resistance. Vea Menos | Request Sample |
| CERAMAT® 248 | BYK | Dispersión de cera para matizado, usada para mejorar las propiedades de superficie de pinturas decorativas solvente-transmitidas. Dispersión de cera de polietileno. | Request Sample |
| CERAMAT® 258 | BYK | Dispersión de cera usada para mejorar las propiedades de superficie de revestimientos para madera e industriales, solvente-transmitidos. Dispersión oxidada de alta densidad de cera de polietileno. | Request Sample |
| CeraSPERSE 31 (Carnauba Wax Compound) | Shamrock Technologies, Inc. | CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based...Vea Mas CeraSPERSE 31 is a carnauba wax compounded in Butyl Carbitol™ (Diethylene glycol monobutyl ether). This slow-evaporating, hydrophilic glycol ether provides compatibility with both polar and non-polar systems. CeraSPERSE 31 is recommended for solvent-based and water-based coatings. Vea Menos | |
| CeraSPERSE UV 636 (Carnauba Wax in UV Monomer) | Shamrock Technologies, Inc. | CeraSPERSE UV 636 is carnauba wax dispersed in the UV monomer TRPGDA. | |
| CeraSPERSE UV 691 (Carnauba Wax in UV Monomer) | Shamrock Technologies, Inc. | Un 25% cera de polietileno oxidada dispersión en TRPGDA. Proporciona resistencia al deslizamientola y la abrasión de transferencia, manteniendo al mismo tiempo brillo y claridad. | |
| COATOSIL* 2812 COATINGS ADDITIVE | Momentive | El silano CoatOSil 2287 Poliuretano ede proporcionar rendimiento de reticulacion de estante estable que no amarillea para mejorar las propiedades físicas de los polímeros de dispersión transmitidos por agua, tales como poliuretano y látex de acrílico. Cu...Vea Mas El silano CoatOSil 2287 Poliuretano ede proporcionar rendimiento de reticulacion de estante estable que no amarillea para mejorar las propiedades físicas de los polímeros de dispersión transmitidos por agua, tales como poliuretano y látex de acrílico. Cuando el silano de CoatOsil 2287 se incorpora como promotor de reticulador o de adherencia, Poliuretano ede proveer de resistencia de agua mejorada y adherencia en lo mojado, buena estabilidad del estante. Vea Menos | |
| COATOSIL* 3500 COATINGS ADDITIVE | Momentive | El aditivo de revestimientos CoatOSil* 2400 es un silicón polietileno óxido-modificado con un grado de modificación inusualmente alto, haciéndolo muy compatible con los solventes y las resinas transmitidos por agua, y compatible con los sistemas transmiti...Vea Mas El aditivo de revestimientos CoatOSil* 2400 es un silicón polietileno óxido-modificado con un grado de modificación inusualmente alto, haciéndolo muy compatible con los solventes y las resinas transmitidos por agua, y compatible con los sistemas transmitidos por solvente. Vea Menos | |
| COATOSIL* 3501 COATINGS ADDITIVE | Momentive | El aditivo para revestimientos CoatOSil* 3501 es el agente reductor de fricción más potente de Momentive, que brinda la máxima reducción en coeficiente de fricción (COF) para formulaciones curadas por radiación en su cartera de aditivos para revestimiento...Vea Mas El aditivo para revestimientos CoatOSil* 3501 es el agente reductor de fricción más potente de Momentive, que brinda la máxima reducción en coeficiente de fricción (COF) para formulaciones curadas por radiación en su cartera de aditivos para revestimientos. Este aditivo también funciona como un desespumador extremadamente eficiente, en especial, en sistemas acuosos. Vea Menos | |
| COATOSIL* 3509 COATINGS ADDITIVE | Momentive | El aditivo para revestimientos CoatOSil* 3509 es un agente de deslizamiento activo con 100 % de reactividad que puede ayudar a mejorar la resistencia a la abrasión y el deterioro en resinas acriladas curadas con luz UV y haces de electrones. Entre los ben...Vea Mas El aditivo para revestimientos CoatOSil* 3509 es un agente de deslizamiento activo con 100 % de reactividad que puede ayudar a mejorar la resistencia a la abrasión y el deterioro en resinas acriladas curadas con luz UV y haces de electrones. Entre los beneficios adicionales, se incluyen una fluidez y uniformidad mejoradas, humectación del sustrato y retención de brillo. Vea Menos | |
| CRAYVALLAC® WN-1135 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance,...Vea Mas CRAYVALLAC® WN-1135 is a micronised modified polypropylene wax showing ease of dispersion in solvent-based and waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. Vea Menos | Request Sample |
| CRAYVALLAC® WN-1495 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide ...Vea Mas CRAYVALLAC® WN-1495 is a very finely micronised polyethylene wax which provides the formulator with means of controlling a coating’s frictional characteristics as well as enhancing its surface properties. CRAYVALLAC® WN-1495 is suitable for use in a wide range of coating applications, and in some cases it offers the formulator additional performance benefits. Vea Menos | Request Sample |
| CRAYVALLAC® WN-1535 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhanc...Vea Mas CRAYVALLAC® WN-1535 is a micronised modified polypropylene wax showing ease of dispersion especially in waterborne formulations. It is used as a matting agent in a wide range of applications, meanwhile imparting a smooth, silky feel and appearance, enhancing slip and improving rub, abrasion and scratch resistance. CRAYVALLAC® WN-1535 is suitable for use in a wide range of solvent-based, water-based, solvent free and powder coatings applications. Vea Menos | Request Sample |
| CRAYVALLAC® WW-1001 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the ...Vea Mas CRAYVALLAC® WW-1001 is a 40% active dispersion of polyethylene wax in water. The low viscosity and high active content of this dispersion, together with freedom from dust, assist the efficiency of manufacturing processes. CRAYVALLAC® WW-1001 provides the formulator with the means of controlling the frictional characteristics of a coating as well as enhancing its surface protection properties. Vea Menos | Request Sample |
| DC Sealing Coating | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the prime...Vea Mas DC Sealing Coating is a thermal-humidity resistant coating. It is commonly used for its anti-corrosive, hole-sealing, chemical and scratch resistant properties. It is commonly used for various kinds of primers and does not change the property of the primer. Vea Menos | |
| Deuteron MM 823 Scratch Resistance Additive | P.A.T. Products | Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuter...Vea Mas Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water. Vea Menos | Request Sample |
| DOWSIL™ 11 Additive | Dow Performance Silicones | Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coat...Vea Mas Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. Vea Menos | |
| DOWSIL™ 11 Additive | Univar Solutions | Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coat...Vea Mas Dow Corning® 11 Additive is a silicone additive provides slip, mar resistance and leveling in solvent-based applications. It can also correct glossing, pinholing and fisheyes, and reduced foaming during production. This product is suitable for inks, coatings, and paints. Vea Menos | Request Sample |
| DOWSIL™ 14 Additive | Dow Performance Silicones | Dow Corning® 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbino...Vea Mas Dow Corning® 14 Additive is a silicone additive which provides slip and leveling in water- and solvent-based applications. It also offers mar resistance in water-based systems. This product is composed of a reactive silicone glycol surfactant with carbinol functionality, supplied as 10% active concentration. Vea Menos | |
| DOWSIL™ 18 Additive | Dow Performance Silicones | Dow Corning® 18 Additive is a non-reactive high-molecular-weight polydimethyl siloxane dispersion containing no volatile solvent. It provides slip and mar resistance for solvent-based coatings as well as a mar resistance for water-based coatings and inks. | |
| DOWSIL™ 210S Additive | Dow Performance Silicones | Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and...Vea Mas Dow Corning® 210S Additive is an ultra-high molecular weight silicone dispersion in water with improved compatibility and low tendency to cause craters. It can be used to customize slip and hand-feel for coating surface, while improving mar resistance and enhancing anti-blocking. Vea Menos | |
| DOWSIL™ 211S Additive | Dow Performance Silicones | DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It...Vea Mas DOWSIL™ 211S Additive is a novel low-cyclic, ultra-high molecular weight silicone delivered in a waterborne system that enhances mar resistance, slip and block resistance performance thereby helping to enable more durable, longer-lasting wood coatings. It also offers high compatibility, solvent dilution, and performs at very low dosage which are essential features for coating formulators. Vea Menos | |
| DOWSIL™ 23 N Additive | Dow Performance Silicones | Dow Corning® 23 N Additive is a silicone additive for solvent and aqueous coatings. It is a white elastomeric silicone powder that contains epoxy groups. This product is resistant to scratching and general marking, and provides a matte finish. | |
| DOWSIL™ 33 Additive | Dow Performance Silicones | Dow Corning® 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, incr...Vea Mas Dow Corning® 33 Additive is a suspension of cured silicone elastomer particles suspended in water. Silicone particles are soft, flexible three-dimensional elastomers with epoxy functionality. This product imparts smooth finish, provides matte effect, increases mar resistance, contains epoxy functionality, and does not impact recoatability. Vea Menos | |
| DOWSIL™ 51 Additive | Dow Performance Silicones | Dow Corning® 51 Additive is an ultra-high-molecular-weight polydimethylsiloxane dispersion in paste form, supplied at 80% solids. It reduces coefficient of friction, provides antiblocking and improves mar resistance. | |
| DOWSIL™ 52 Additive | Dow Performance Silicones | Dow Corning® 52 Additive is an ultra-high molecular weight silicone dispersion in water, supplied at 65% solids. It reduces static and dynamic coefficient of friction and improves mar resistance in coatings and inks applications. | |
| DOWSIL™ 55 Additive | Dow Performance Silicones | Dow Corning® 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces crateri...Vea Mas Dow Corning® 55 Additive is a reactive silicone glycol surfactant with carbinol functionality, supplied at 10% active concentration. It imparts mar and abrasion resistance by reducing surface friction, improves flow-out, wetting and gloss, reduces cratering, and prevents pinholing, orange peel, and cissing. Vea Menos | |
| DOWSIL™ 56 Additive | Univar Solutions | Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based ...Vea Mas Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. Vea Menos | Request Sample |
| DOWSIL™ 56 Additive | Dow Performance Silicones | Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based ...Vea Mas Dow Corning® 56 Additive is a 100% active alkylmethyl siloxane additive. It is intended for eliminating microfoam, improving leveling and improving mar resistance. This product has been used in solvent-based wood coatings, solventless paints, water-based wood coatings, and solvent-based industrial coatings. Vea Menos | |
| DOWSIL™ 57 Additive | Dow Performance Silicones | Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with ac...Vea Mas Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. Vea Menos | |
| DOWSIL™ 57 Additive | Univar Solutions | Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with ac...Vea Mas Dow Corning® 57 Additive is a nonreactive silicone glycol copolymer surfactant supplied at 100% active concentration. It provides slip, gloss enhancement, pigment treatment and leveling for ink and coatings applications. This product is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. Vea Menos | Request Sample |
| EBECRYL® 3418 | Allnex | EBECRYL® 3418 es un diacrilato epoxi modificado que presenta una excelente reactividad y baja viscosidad. Las películas de EBECRYL® 3418 curadas por luz ultravioleta (UV) o haz de electrones (EB) ofrecen una alta flexibilidad, brillo, dureza, adherencia y...Vea Mas EBECRYL® 3418 es un diacrilato epoxi modificado que presenta una excelente reactividad y baja viscosidad. Las películas de EBECRYL® 3418 curadas por luz ultravioleta (UV) o haz de electrones (EB) ofrecen una alta flexibilidad, brillo, dureza, adherencia y resistencia superior a los arañazos y a los productos químicos. Vea Menos | Request Sample |
| EBECRYL® 50 | Allnex | EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured ...Vea Mas EBECRYL® 50 is the tetraacrylate ester of 5 mole ethoxylated pentaerythritol. It is a low viscosity diluting oligomer characterized by low odor and light color. EBECRYL® 50 provides fast cure response in ultraviolet light (UV) or electron beam (EB) cured coatings and inks. Besides its high reactivity, EBECRYL® 50 improves the hardness and solvent resistance of cured coatings and inks. This product is particularly useful in offset inks, flexo inks and overprint varnishes. Vea Menos | Request Sample |
| EBECRYL® 8602 | Allnex | EBECRYL® 8602 es un acrilato de uretano alifático funcional. Después de la polimerización, las películas de EBECRYL® 8602 presentan una mejora significativa en la resistencia a la intemperie en comparación con el acrilato de uretano alifático hexafunciona...Vea Mas EBECRYL® 8602 es un acrilato de uretano alifático funcional. Después de la polimerización, las películas de EBECRYL® 8602 presentan una mejora significativa en la resistencia a la intemperie en comparación con el acrilato de uretano alifático hexafuncional sin comprometer la resistencia al rayado y a la abrasión. Además, EBECRYL® 8602 no contiene compuestos orgánicos de estaño, metales pesados* o quinonas añadidos intencionadamente. Vea Menos | Request Sample |
| EBECRYL® 895 | Allnex | Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and E...Vea Mas Ebecryl® 895 is a multifunctional monomer which polymerizes when exposed to sources of free radicals. It is composed primarily of the pentaacrylate and hexaacrylate esters of dipentaerythritol. Ebecryl® 895 is particularly useful in UV (ultraviolet) and EB (electron beam) curable inks and coatings where improved cure response, hardness and scratch/abrasion resistance are required. Vea Menos | Request Sample |
| EDAPLAN® LA 410 | Munzing Chemie | EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance...Vea Mas EDAPLAN® LA 410 is a colourless to slightly yellowish liquid, suitable for all non-aqueous coating and printing ink systems. It improves surface properties and can be used in curtain coatings. EDAPLAN® LA 410 is recommended for improved scratch resistance and slip of metallic effect lacquers and varnishes. It prevents surface defects like craters and orange peel. EDAPLAN® LA 410 provides defoaming and degassing. Vea Menos | |
| EFKA® SL 3030 | BASF Formulation Additives | EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysil...Vea Mas EFKA® SL 3030 is an additive designed to improve leveling and to increase scratch and abrasion resistance. It improves anti-blocking characteristics, prevents floating and is universally compatible with various coating systems. Compared to dimethylpolysiloxane, this slip & leveling agent is universally compatible with various coating systems and does not cause cratering even in excessively high concentrations. Vea Menos | |
| EFKA® SL 3033 | BASF Formulation Additives | EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and crater...Vea Mas EFKA® SL 3033 is a very effective additive, which increases slip and surface smoothness. It is used in clear coatings and provides leveling, increased scratch and abrasion resistance, enhanced anti-blocking characteristics and prevents floating and cratering. It is an organically modified polysiloxane. Vea Menos | |
| EFKA® SL 3035 | BASF Formulation Additives | EFKA® SL 3035 is an organically modified polysiloxane that can be used in water and solvent based coatings. It provides improved leveling and increases slip and mar-resistance. It prevents floating and is hydrolysis resistant. Due to its excellent compati...Vea Mas EFKA® SL 3035 is an organically modified polysiloxane that can be used in water and solvent based coatings. It provides improved leveling and increases slip and mar-resistance. It prevents floating and is hydrolysis resistant. Due to its excellent compatibility, EFKA® SL 3035 is particularly recommended for polyurethane and polyester wood coatings. It helps to prevent curtain rupture in curtain coating applications. Vea Menos | |
| EFKA® SL 3236 | BASF Formulation Additives | EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray accep...Vea Mas EFKA® SL 3236 is an organically modified polysiloxane, soluble in aliphatic and aromatic hydrocarbons, esters, and ketones. It provides leveling and surface smoothness, increased slip and mar-resistance, stabilizes the curtain and improves overspray acceptance. EFKA® SL 3236 is particularly recommended for non-aqueous coatings such as baking enamels based on alkyd, acrylic or polyester resins, acid-curable or polyurethane wood finishes particularly when applied by curtain coating, self-leveling epoxy flooring compounds, UV-curable paper lacquers and air-drying alkyd systems. Vea Menos | |
| Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) is a coating that is used for its anti-corrosion, adhesion, and acid, alkali, salt spray, solvent and weather resistance properties. It is commonly applied on the surface of stamping parts, autom...Vea Mas Epoxy Modified Resin Black Anti-Corrosive Coating (90-6 II) is a coating that is used for its anti-corrosion, adhesion, and acid, alkali, salt spray, solvent and weather resistance properties. It is commonly applied on the surface of stamping parts, automobile chassis parts, wind driven generators, bridges, steel structures, and various metals. Vea Menos | |
| FluoroSLIP® 225 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. | FluoroSLIP® 225 is a PTFE and low molecular weight synthetic wax blend. | |
| FluoroSLIP® 511 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. | Una mezcla de un polietileno y politetrafluoroetileno finamente molido, de alto peso molecular. Está diseñado para proporcionar a los formuladores resistencia a la abrasión excelente y un buen deslizamiento. Se utiliza en recubrimientos de latas, industr...Vea Mas Una mezcla de un polietileno y politetrafluoroetileno finamente molido, de alto peso molecular. Está diseñado para proporcionar a los formuladores resistencia a la abrasión excelente y un buen deslizamiento. Se utiliza en recubrimientos de latas, industrial, maderas y de bobinas. Vea Menos | |
| FluoroSLIP® 605 (PTFE / Synthetic Wax Blend) | Shamrock Technologies, Inc. | Una mezcla de un polietileno y politetrafluoroetileno finamente molido, de alto peso molecular. FluoroSLIP 605 imparte propiedades superiores de frotación/desgaste, sin deslizamiento. | |
| GENGLAZE® EC-2447 | Synthomer | GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally f...Vea Mas GENGLAZE® EC-2447 is a heat-activated in-mold coating designed to enhance the surface of molded parts. GENGLAZE® EC-2447 in-mold coating surface finish is incorporated during compression molding instead of being applied separately. It is environmentally friendly as it does not contain solvents (100% solids), and reduces the number of surface finishing steps and manufacturing costs. Vea Menos | |
| Grilonit® P 6835 | EMS-CHEMIE AG (PRIMID) | Grilonit® P 6835 is a thermoplastic modified co-polyamide additive that has improved abrasion resistance, enhanced slip coverage, and improved edge coverage. This product is used to produce nylon modified polyester and hybrid powder coatings. | |
| HPP-E-9887-21-60 | US Polymers - Accurez LLC | HPP-E-9887-21-60 is an acrylic modified alkyd which exhibits phenomenal air-drying. In addition, HPP-E-9887-21-60 develops early hardness and toughness in <30 minutes when employed in a fully formulated (pigment, extenders, additives) product. HPP-E-9887-...Vea Mas HPP-E-9887-21-60 is an acrylic modified alkyd which exhibits phenomenal air-drying. In addition, HPP-E-9887-21-60 develops early hardness and toughness in <30 minutes when employed in a fully formulated (pigment, extenders, additives) product. HPP-E-9887-21-60 develops early chemical resistance and water resistance. This is accompanied by excellent adhesion to metal, ceramic, and porcelain. HPP-E-9887-21-60 has exceptional gloss, gloss retention, and weatherability. HPP-E-9887-21-60 shows superior mar, scratch, and micro-scratch resistance when compared to standard epoxy-based tub refinishers. Vea Menos | Request Sample |
| HPP-E-9932-21-70 | US Polymers - Accurez LLC | HPP-E-9932-21-70 is an acrylic modified alkyd which exhibits phenomenal air-drying. In addition, HPP-E-9932-21-70 develops early hardness and toughness in <30 minutes when employed in a fully formulated (pigment, extenders, additives) product. HPP-E-9932-...Vea Mas HPP-E-9932-21-70 is an acrylic modified alkyd which exhibits phenomenal air-drying. In addition, HPP-E-9932-21-70 develops early hardness and toughness in <30 minutes when employed in a fully formulated (pigment, extenders, additives) product. HPP-E-9932-21-70 develops early chemical resistance and water resistance. This is accompanied by excellent adhesion to metal. HPP-E-9932-21-70 has exceptional gloss, gloss retention, and weatherability. HPP-E-9932-21-70 shows superior mar, scratch, and micro-scratch resistance when compared to standard epoxy-based tub refinishers. Vea Menos | Request Sample |
| HPP-E-9947-21-50 | US Polymers - Accurez LLC | HPP-E-9947-21-50 is an acrylic modified alkyd which exhibits outstanding air-drying properties. HPP-E-9947-21-50 develops early hardness and toughness. HPP-E-9947-21-50 develops early chemical resistance and water resistance. In addition, it shows excelle...Vea Mas HPP-E-9947-21-50 is an acrylic modified alkyd which exhibits outstanding air-drying properties. HPP-E-9947-21-50 develops early hardness and toughness. HPP-E-9947-21-50 develops early chemical resistance and water resistance. In addition, it shows excellent adhesion to metal and most common surfaces. HPP-E-9947-21-50 has exceptional gloss and gloss retention. HPP-E-9947-21-50 shows superior mar, scratch, and micro-scratch resistance as well as gloss retention. Vea Menos | Request Sample |
| HS972 | Tianyi Chemical Engineering Material Co., Ltd. | HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS972, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 3.7 and 4.5. Vea Menos | |
| HS974 | Tianyi Chemical Engineering Material Co., Ltd. | HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS974, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. Vea Menos | |
| HS976 | Tianyi Chemical Engineering Material Co., Ltd. | HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insolubl...Vea Mas HS976, in the form of a white powder, is an hydrophobic fumed silica that can be used in a variety of applications, including epoxy resins, plastic coatings, molded products, powders used in fire extinguishers, and other coatings. This product is insoluble in water and disperses easily. Its pH value is between 5.5 and 8.0. Vea Menos | |
| Hydrocer 257 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 257 is synthetic wax in a non-ionic aqueous dispersion recommened for water based coating systems. | |
| Hydrocer 357 (Spherical Synthetic Wax Dispersion) | Shamrock Technologies, Inc. | Una dispersión acuosa al 50% de una cera de polietileno de alta MW. Tiene control de deslizamiento y resistencia al roce, tiene un impacto moderado en brillo, tensioactivo no iónico para buena dispersabilidad/compatibilidad y estabilidad de almacenamiento...Vea Mas Una dispersión acuosa al 50% de una cera de polietileno de alta MW. Tiene control de deslizamiento y resistencia al roce, tiene un impacto moderado en brillo, tensioactivo no iónico para buena dispersabilidad/compatibilidad y estabilidad de almacenamiento excelente sin el uso de resinas o aglutinantes. Vea Menos | |
| Hydrocer™ 7112 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer™ 7112 is a stable, aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer 7206 (Synthetic Wax Dispersion) | Shamrock Technologies, Inc. | Hydrocer 7206 is a stable, non-ionic aqueous synthetic wax dispersion. It is recommend for water-based ink and coating systems. | |
| Hydrocer EC 98 | Shamrock Technologies, Inc. | Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. ...Vea Mas Hydrocer EC 98 is an aqueous anionic emulsion of #1 carnauba wax. It is recommended as a slip and anti-mar additive for low pH polymers, such as polyvinyl acetate, polyvinyl chloride, polyvinylidene chloride and may be used with acid functional polymers. It also provides very good block mar resistance to OPVs and may reduce low temperature cracking. This emulsion can be post-added after letdown using mild agitation. Vea Menos | |
| Hydrocer EE 95 (Synthetic Wax Emulsion) | Shamrock Technologies, Inc. | Una emulsión del polietileno aniónico, de alta densidad. Proporciona una mayor resistencia a la abrasión y el deslizamiento. También mejora la resistencia al rayado y offset y los resultados de deslices angulares. Ideal para aplicaciones en las que se re...Vea Mas Una emulsión del polietileno aniónico, de alta densidad. Proporciona una mayor resistencia a la abrasión y el deslizamiento. También mejora la resistencia al rayado y offset y los resultados de deslices angulares. Ideal para aplicaciones en las que se requiere un rápido desarrollo de resistencia al agua. Vea Menos | |
| Hydrocer EP 91 (Paraffin Wax Emulsion) | Shamrock Technologies, Inc. | Una emulsión de parafina en agua. Proporciona excelente resistencia al agua cuando se usa en tintas y recubrimientos a base de agua. Se produce mediante un único proceso de emulsificación y está libre de agentes tensioactivos hidrófilos. | |
| Inorganic Zinc Flake Anti-corrosive Coating (90-1) | Beijing Yongtaihe Metal Anticorrosion Technology Co., Ltd. | Inorganic Zinc Flake Anti-Corrosive Coating (90-1) is a coating that is used for its anti-corrosion, and weather, oil, and climate resistance properties. It is commonly applied to the surface of automobiles, steel structures, and metal products. | |
| JONCRYL® WAX 26 | BASF Dispersions & Resins | Joncryl® Wax 26 is a 26% solid, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. The fine particle size of this product makes it ideal for high gloss overpr...Vea Mas Joncryl® Wax 26 is a 26% solid, small particle size, polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings with no significant loss of gloss. The fine particle size of this product makes it ideal for high gloss overprint varnish and gravure applications. Vea Menos | |
| JONCRYL® WAX 28 | BASF Dispersions & Resins | Joncryl® WAX 28 is a 35% solids polyethylene wax emulsion that improves the rub resistance of water-based inks and coatings without significant loss of gloss often associated with polyethylene wax additions. | |
| JONCRYL® WAX 4 | BASF Dispersions & Resins | Joncryl® Wax 4 is a highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water-based ink formulations. Its unique composition results in very high rub and scuff resistance at low use ...Vea Mas Joncryl® Wax 4 is a highly efficient, large particle size polyethylene wax dispersion designed to impart outstanding rub and scuff resistance to water-based ink formulations. Its unique composition results in very high rub and scuff resistance at low use levels. For this reason, this product is extremely effective. Joncryl® Wax 4 is recommended for printing inks for flexographic or gravure applications, and interior/exterior wood coatings for flooring, furniture, or millwork applications. Vea Menos | |
| Lanco™ 1380 F | Lubrizol Advanced Materials, Inc. | Lanco™ 1380 F is a micronized wax with a high melting range and excellent toughness. In liquid coatings the use of Lanco 1380 F shows a high hardness in combination with matting efficiency and an especially good burnishing resistance. Because it contains ...Vea Mas Lanco™ 1380 F is a micronized wax with a high melting range and excellent toughness. In liquid coatings the use of Lanco 1380 F shows a high hardness in combination with matting efficiency and an especially good burnishing resistance. Because it contains no halogens, Lanco 1380 F can also be employed in areas where PTFE/PE waxes cannot be used. Vea Menos | |
| Lanco™ 1560 LF | Lubrizol Advanced Materials, Inc. | Lanco™ 1560 LF is a readily dispersible wax for waterborne coating and ink systems. | |
| Lanco™ Glidd 4832 | Lubrizol Advanced Materials, Inc. | Lanco™ Glidd 4832 is an easy-to-handle wax dispersion that provides very good stability in the final coating. Compared to most micronized products, Lanco™ Glidd 4832 has less influence on porosity, gloss and transparency. Lanco™ Glidd 4832 can be used in ...Vea Mas Lanco™ Glidd 4832 is an easy-to-handle wax dispersion that provides very good stability in the final coating. Compared to most micronized products, Lanco™ Glidd 4832 has less influence on porosity, gloss and transparency. Lanco™ Glidd 4832 can be used in can coatings and coil coatings. The use of Lanco™ Glidd 4832 leads to excellent scratch and abrasion resistance, significant COF reduction and good gloss retention. Vea Menos |
