| CERAFLOUR® 1000 | BYK | Polímero biodegradable basado en recursos renovables con propiedades parecidas a las de la cera, para mejorar eficacia de estera y háptica. | Request Sample |
| CERAFLOUR® 1002 | BYK | CERAFLOUR® 1002 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining high transparency. It ...Vea Mas CERAFLOUR® 1002 is a biodegradable, micronized polymer with wax-like properties based on renewable raw materials for aqueous, solvent-borne, solvent-free, and UV systems for matting and improving surface protection while maintaining high transparency. It creates a soft feel effect and a slightly textured surface. Vea Menos | Request Sample |
| CRAYVALLAC® WN-1150 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1150 is used to control gloss between 30 – 60% for epoxy/polyester hybrid, HAA and TGIC based polyester powder coatings. It shows no effect on weather ability or physical properties. | Request Sample |
| CRAYVALLAC® WN-1875 | Arkema Rheology & Specialty Additives | CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly us...Vea Mas CRAYVALLAC® WN-1875 is a finely micronized polymeric material for use in a wide range of water-based and solvent-based applications, where it provides a matting and satin effect. CRAYVALLAC® WN-1875 is resistant to those solvents and chemicals commonly used in the coatings industry. Heat resistance, weather resistance and light stability are most favourable with this product. Vea Menos | Request Sample |
| Deuteron MK Matting Agent | P.A.T. Products | Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The ...Vea Mas Deuteron MK matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. Vea Menos | Request Sample |
| Deuteron MK-F Matting Agent | P.A.T. Products | Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. D...Vea Mas Deuteron MK-F matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. Vea Menos | Request Sample |
| Deuteron MK-F6 Matting Agent | P.A.T. Products | Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. ...Vea Mas Deuteron MK-F6 matting agent is an organic, duroplastic, urea-methanal polymer from PAT products. It is a fine, micro-ground micronized powder, which enables it to be used in a wide range of applications for producing satin-flat and satin-gloss coatings. Due to its level of fineness, this product excels where particularly thin, dry films are applied or where very smooth surfaces are required. The Deuteron MK series is available in customizable particle sizes, which allows for adjustments to specific requirements. Deuteron MK-F6 achieves matting with a limited effect on system viscosity, which is important for UV systems. It offers solvent and chemical resistance, improved mechanical resistance in combination with inorganic matting agents, and scratch resistance and resistance against polishing. This product can be used in water-borne, solvent-borne and solvent-free systems; in air-dried and stove-dried systems. It can also be used in printing inks, wood lacquers, UV curing coatings, coil-coatings, lacquers on foils, aqueous wood and furniture varnishes, and in exterior coatings applications. Vea Menos | Request Sample |
| Nuevo! Deuteron MM 659 Matting Agent for UV Systems | P.A.T. Products | Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnis...Vea Mas Deuteron MM 659 is a matting agent and soft-feel additive ideal for UV curing systems. Deuteron MM 659 does not spoil the transparency of UV curing lacquer systems due to its composition. The coating surfaces obtained by using MM 659 show excellent burnishing and mar resistances. The use of Deuteron MM 659 also imparts coatings with the haptic quality of soft touch or soft feel. In general, the additional use of waxes, PTFE or similar products is not necessary. Vea Menos | Request Sample |
| Deuteron MM 677 Aqueous Matting Liquid | P.A.T. Products | Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). ...Vea Mas Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazing, wood and furniture lacquers, printing inks, and industrial finishes (air-drying and stove cured enamels). In comparison with powdery matting agents, Deuteron MM 677 offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability. The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. Vea Menos | Request Sample |
| ProHere® L 90600 | Michelman | ProHere® L 90600 is an anionic polyamide dispersion, that provides excellent lubricity, scratch and abrasion resistance and matting to the surface of metal coatings. | |
| ProHere® L 90800 | Michelman | ProHere® L 90800 is a nonionic PTFE dispersion that provides excellent lubricity, while adding scratch and abrasion resistance to metal coatings. It also has high temperature resistance, giving a matting effect to the surface. | |
| ProHere® L 90801 | Michelman | ProHere® L 90801 is a nonionic PTFE dispersion that imparts lubricity and scratch resistance to metal coatings, giving a matting effect to the surface. |
